Upload
nk-instruments
View
215
Download
0
Embed Size (px)
DESCRIPTION
MFSPT-25R1 is a paddle type flow switch suitable for wide range of non-hazardous liquids. It offers less pressure drop over higher flow rates compared to other paddle operated flow switches. These flow switches are usually factory set to customized flow setting requirements for the user.
Citation preview
NK Instruments Pvt. Ltd.
501-504, Raunak Arcade, Near THC Hospital, Gokhale Road, Naupada, Thane (W)Maharashtra-400602 India
Contact : 022 25301330/31/32 Mobile : 8108125494
Email : [email protected] Website : www.nkinstruments.com
General
MFSPT-25R1 is a paddle type flow switch suitable for wide range of non-hazardous
liquids. It offers less pressure drop over higher flow rates compared to other paddle
operated flow switches. These flow switches are usually factory set to customized
flow setting requirements for the user.
Operating Principle
The flow monitoring comprises a paddle system to which a permanent magnet is attached at one end. This paddle is pivoted on
the circular disc attached beneath the Hexagonal connector. Above this magnet a Reed switch is attached.
When the flow being monitored pushed against the paddle system, the paddle swings away. This actuates the reed switch
contacts. As soon as the flow is interrupted, the paddle moves back to its starting position, thus de-activates the reed switch
contacts.
Technical Specifications
Max. System Pressure : 20 bar(standard version) high pressure version can be provided on demand
Temperature Range : 10-80oC
Pressure Drop : <80 mbar at Qmax (For Qmax refer flow range table)
Accessories : Refer ordering information
Material of construction : SS 304
Set point tolerance : + - 10%
Repeatability Tolerance : + - 5%
Contact Rating : 1.5A 230VAC SPST Reed Switch
Advantage
Low Pressure Drop
Instant response
High repeatability
Max. Pressure rating 250 bar as an option
Switching function dependent on flow rate alone, not on temperature or pressure
Contact closes when liquid is flowing
Contact opens if flow is interrupted
OEM designed, can be modified as per customer requirement
Flow Rates
For custom flow rates please contact us. We can provide you the customized flow settings.
Installation Instruction
The flow switch can be mounted in a horizontal or vertical pipeline but
must be located in a section of pipe where there is a straight run of at least
5 pipe diameters on each side of the switch.
For detailed Installation please refer the installation manual provided with
flow switch.
Continuous efforts for product development may necessitate changes in these details without notice
FLOW SWITCH – MAGNETIC PADDLE FLOW SWITCH MODEL : FSPT-25R1