Embed Size (px)
Citation preview
Packing Solutionsby Sovella
www.sovella.nl2
New requirements in dispatch areas
For a long time the packing bench was a flat bench with some storage for packing material. This has changed drastically during the last few years as packing areas now incorporate packing, dispatch and quality control areas where reporting, traceability, information sharing and packing activities are key elements.
Sovella - with more than 40 years of experience in manufacturing human workspace solutions - recognized this changing demand and the products in this catalogue have been specifically designed and combined accordingly.
The 2500+ standard items in Sovella’s range are easily interchangeable and enable our customers to create productive and ergonomic packing solutions with ease.
Sovella’s packing benches are designed for activities where productivity, efficiency, effectiveness and working conditions are of utmost importance. In dispatch areas this includes sorting, bagging, collating, carton packing, weighing, re-packing, order picking, (re)labeling, coding, spot gluing, pick and pack operations and assembly to order activities.
Sovella packing solutions are used in industries such as health care, electronics, fine mechanics, luxury, aviation, nanotech, military and clean-room based technology.
Sovella’s packaging workstations
www.sovella.nl 3
Sovella workstations frames are available in 5 styles:Concept: robust and plenty of leg space Concept Crank: Plenty of leg space and manual height adjustmentConcept Motor: Ideal sit stand working conditionsBasic: Simple and effectiveFrame: Ideal for light pack conditions
All 5 models can be equipped with Sovella’s accessories to create productive packing solutions.
Carton boxes, monitor, etc are for display purposes only and are not included in our offer.The items shown in this brochure are a small selection of Sovella’s wide range of workspace solutions. Contact your sales representative for more information and possibilities.
Create your personal packing station!Workstations frames
Packing bench Order No C10041110
Concept packaging workstation 1500 x 900 mm equipped with roll storage, triple layer cutting unit, perforated tool storage plus 13 pcs. hook set and a carton storage shelf.
Packing frame Order No C12341104
Frame workstation 1800 x 600 mm, a simple solution for packing work. Workstation comes with Perforated panel, hookset, document holder and M1350 shelf with 2 pair of metal dividers for envelopes.
Pick-and-Pack Bench Order No C10141110
Concept crank workstation 1500 x 900 mm, adjustable in height and equipped with a bin rail for small components storage, a CPU holder, Monitor/Keyboard holder, carton storage and a mobile drawer unit.
Pack-to-order bench Order No C12041110
Basic workstation frame 1500 x 900 mm with carton shelves, printer platform, monitor and CPU holder. Scale table is optional.
Repack and label workstation Order No C10341110
Motorized workstation 1800 x 900 mm with maximum storage for folded carton boxes. Tools can be easily stored in the drawer unit. Workstation comes with perforated tool plate, metal shelf M900x400, terminal and monitor/keyboard holder.
www.sovella.nl4
Smart Packaging
Sovella offers the world’s widest range of standard interchangeable accessories that guarantee an individually optimized packing solution. Due to the modularity, Sovella packing benches and solutions can be easily adapted to the ever changing dispatching environment.The accessories that fit between the perforated uprights are available in various width or upright modules sizes. Mounting a single, double or even triple upright module to a bench allows optimal positioning of components and tools, thus reducing cycle times and increasing productivity while maintaining ergonomics comfort.
As the world leading manufacturer of industrial furniture, we offer, in addition to our wide range of standard items, the possibility for turn key solutions.
Efficiency by optimal positioning of components and tools
Sovella turn key solutions
Many Fortune 500 companies have utilized our project services. Sovella’s design-to-manufacturing capabilities are unlimited and our experience in production principle - such as lean manufacturing - are unsurpassed.Please contact your local representative for more information about Sovella’s Project Services.
Module size
The Modular (M) size refers to the distance between two upright tubes from the middle of the tube. The modular size is used to find the appropriate accessories.
www.sovella.nl 5
Packing solution components
Packing table ‘Concept’Productive workstation for industrial use, including 25 mm thick laminated table top. Table frame is steplessly adjustable in height by using tools.
Order No. C100411081500 x 900 x 670 - 1120 mmMax. load 500Kg
Order No. C100411091806 x 900 x 670 - 1120 mmMax. load 500Kg
Packing table ‘Concept Crank’Same as ‘Concept’ but height adjustment by hand crank.
Order No. C101411081500 x 900 x 675 - 1125 mmMax. load 200Kg
Order No. C101411091806 x 900 x 700 - 1050 mmMax. load 200Kg
Packing table ‘Concept Motor’Ideal sit-stand packing station with robust motorized frame. Control includes up/down and three preset for easy height positioning.
Prevent fingers being trapped between adjacent workstations by Sovella’s safety plate (optional).
Order No. C103411081500 x 900 x 700 - 1100 mmMax. load 300Kg
Order No. C103411091806 x 900 x 700 - 1100 mmMax. load 300Kg
Packing table ‘Basic’Table for basic packing duties, including 25 mm thick laminated table top. Table is adjustable in height by using tools.
Order No. C120411081500 x 900 x 650 - 900 mmMax. load 300Kg
Order No. C120411091806 x 900 x 650 - 900 mmMax. load 300Kg
Packing station ‘Frame’Flexible frame M1350 and table top 1806 x 600 mm for light assembly and packing. The frame can be easily equipped with standard Sovella accessories.
Order No. C123411031806 x 600 x 1850 mm(Suitable for M1350 accessories)Max. load frame 100KgMax load table top 60Kg
www.sovella.nl6
Roll holder (upright)Roll holder mounts to upright
Order No. 859040-35M1350 Tube + brackets 1310 x Ø 38 mm
Order No. 859041-35M1500 Tube + brackets 1455 x Ø 38 mm
Order No. 859042-35M1800 Tube + brackets 1760 x Ø 38 mm
Triple layer cutting unitCutting unit for carton, paper and plastic bubble foil, designed to work with three different packing materials at once. Available in various lengths.
Order No. 852601-00M1350 cutting unit1356 x 130 x 230 mmEffective width: 1000 mm
Order No. 852602-00M1500 cutting unit1556 x 130 x 230 mmEffective width: 1200 mm
Order No. 852606-00M1800 cutting unit1856 x 130 x 230 mmEffective width: 1600 mm
Bin railMetal bin rail for storage of plastic bins, 50Kg maximum load. Bin rail can be fixed in 0° and 15° angle for ergonomic operation.Please check the Sovella product catalog for various plastic bins.
Order No. 852025-35Bin rail M900895 x 65 x 90 mm
Order No. 859001-35Bin rail M13501343 x 65 x 100 mm
Order No. 859012-35Bin rail M15001499 x 65 x 100 mm
Order No. 859002-35Bin rail M18001799 x 65 x 100 mm
Upright TubeThe core in flexibility. Sovella upright tubes make the workstation work. The perforated upright tube allows many Sovella accessories to be easily fitted to the packing table. The upright tubes can be fixed to Concept packing tables. A fixing set is required for use with basic packing tables.
Order No. 852581-35Fixing set for basic frame
Order No. 860367-3530 x 60 x 996 mmEffective height: 710 mm
Order No. 860024-3530 x 60 x 1359 mmEffective height: 1075 mm
Order No. 860025-3530 x 60 x 1582 mmEffective height: 1300 mm
Top shelfMetal shelf mounts to upright, 60Kg maximum load. Shelf can be easily equipped with metal dividers for storage of carton boxes, envelopes, etc.
Order No. 859013-35Top shelf M13501317 x 400 x 30 mm
Order No. 859015-35Top shelf M15001467 x 400 x 30 mm
Order No. 859018-35Top shelf M18001773 x 400 x 30 mm
Shelf dividersSet of dividers for storage needs. Carton dividers are fixed on top or bottom shelf in 125 mm spacing.
Order No. 861116-35Metal plate dividers for envelopes285 x 190 mm - includes 2 pcs
Order No. 859010-35Tube divider for cartonØ 16 x 336 x 300 mm - includes 4 pcs86111635 85901035
www.sovella.nl 7
Perforated PanelPerforated panels are the best solution for storage of tools and equipment. Sovella perforated panels are 390 mm high and mount to the uprights. A wide range of hooks are available, please check the Sovella product catalogue for more info.
Order No. 860259-35Perforated panel M900871 x 390 mm
Order No. 859003-35Perforated panel M13501318 x 20 x 390 mm
Order No. 859009-35Perforated panel M15001474 x 20 x 390 mm
Order No. 859004-35Perforated panel M18001774 x 20 x 390 mm
Light & Balancer railThe light balancer rail guarantees perfect positioning of overhead lighting and simultaneously allows the fixing of the tool balancer. The light balancer rail comes with one sliding piece and is fully adjustable.
Order No. 91835007Light & Balancer rail M900900 x 500 - 700 x 350 mmmax load 15Kg
Order No. 91835011Light & Balancer rail M13501350 x 500 - 700 x 350 mm max load 15Kg
Order No. 91835006 Light & Balancer rail M15001500 x 500 - 700 x 350 mmmax load 15Kg
Order No. 91835008 Light & Balancer rail M18001800 x 500 - 700 x 350 mmmax load 15Kg
Overhead lightsOptimal packing conditions require optimal light. Sovella lights are specially designed according the EN 12464-1 to ensure productiveness by enhanced ergonomics. Fixes to light balancer rail.
Order No. 861936-00Satelite 36W500 x 155 x 50 mm
Order No. 861928-00Prolite 28W1230 x 155 x 50 mm
Order No. 861954-00Hilite 54W, dimmer1230 x 155 x 50 mm
86193600
86192800
86195400
www.sovella.nl8
Energy rail Energy rail with 8 Schuko sockets and on/off switch, mounts to uprights vertically.Other sockets upon request
Order No. 91051001Energy rail80 x 40 x 440 mm
LCD holder on armEasy installation of the LCD monitor on the packing station! The LCD holder on a double arm gives the benefit of a clean table top, while the monitor is ergonomically positioned and fully adjustable. Suitable for Vesa 75 and 100.
Order No. 93035002LCD holder on armMax. Load 15Kg
Keyboard trayOrder No. 860941-35Keyboard tray for LCD holder on480 x 260 mmMax. load 5Kg
Order No. 92535001Keyboard tray, fitted under basic or Concept table top630 x 400 mmMax. Load 10Kg
Printer platform fixedAuxilary top suitable for placement of label printers mount to upright. Left and right versions available, maximum load 40Kg.
Order No. 92641001Auxilary top left from upright400 x 500 mm
Order No. 92641002Auxilary top right from upright400 x 500 mm
Sliding printer shelfPrinter shelf with sliding platform for easy replacement of the etiket roll. Mounts to upright, maximum load 30Kg.
Order No. 859060-35Sliding printer shelf280 x 500 mm
Document holder on armMetal document holder fixes on the upright. Easily adjustable using the double arm, maximum load 5Kg.
Order No. 92835008Document holder A4290 x 330 mm
Order No. 92835009Document holder A3418 x 330 mm
92641001
86094135
92641002
92535001
Steel ShelvesSteel shelves can be fitted at a 0° and 20° angle and come in two depths: 300 and 400 mm.
Order No. 852283-35Steel shelf M900890 x 300 mm, max load 50Kg
Order No. 852769-35Steel shelf M900890 x 400 mm, max load 50Kg
Order No. 860787-35 Steel shelf M13501340 x 300 mm, max load 50Kg
Order No. 860788-35 Steel shelf M13501340 x 400 mm, max load 50Kg
www.sovella.nl 9
Terminal/folder holderEasy storage of terminal or document folders at the packing table. Mounts to uprights, maximum load 5Kg.
Order No. 860983-35Terminal/folder holder130 x 290 x 330 mm
PC holderPC storage at the packing table.Mounts to table frame.
Order No. 860552-35PC holder, concept table180 - 225 x 450 x 50 mm
Order No. 860740-35PC holder, concept motor table180 - 225 x 450 x 50 mm
Order No. 854440-35PC holder, concept basic table180 - 225 x 450 x 50 mm
Table Table Shelf Max Order No.frame width dimensions Load
Concept* 1500 1167 x 600 x 30 mm 60Kg 859225-35 1806 1467 x 600 x 30 mm 60Kg 859228-35Concept 1500 1167 x 600 x 30 mm 60Kg 859025-35(crank & motor) 1806 1467 x 600 x 30 mm 60Kg 859028-35Basic 1500 1468 x 400 x 30 mm 60Kg 859035-35 1806 1773 x 400 x 30 mm 60Kg 859038-35* These items include the bar for the concept tableframe.
Bottom shelfMetal shelf mounts to table frame, 60Kg maximum load. Shelf can be easily equipped with metal dividers for storage of carton boxes. Depth 600 mm, comes with brackets.
Carton trolleyMetal trolley for storage of cartons under the table. Trolley is equipped with two swivel and two fixed wheels and comes with 7 metal dividers. Maximum load 60Kg.
Order No. 859070-41Carton trolley with dividers1167 x 600 x 120 mm
Table Table Roll storage Max. Max Order No.frame width dimensions Medium Load Width
Concept 1500 1410 x 60 x 495 mm 1200 mm 40Kg 859044-35 1806 1715 x 60 x 495 mm 1500 mm 40Kg 859045-35Basic 1500 1500 x 40 x 40 mm 1200 mm 40Kg 859046-35 1806 1800 x 40 x 40 mm 1500 mm 40Kg 859047-35
Roll storageMetal tube for storage of packing material under table top. Roll storage comes with fixing bracket. Maximum load 40Kg
85904635
85904735
85444035
85903535
85903835
85904435
85904535
86055235
86074035
85902535
85902835
www.sovella.nl10
Fixing set for drawer unit 38Fixing set to mount the drawer unit under the various table tops.
Table frame Fixing bracket Concept 860239-35Concept motor 854463-35Basic, 900 deep 855053-35Drawer unit not suitable for concept cranck and frame type workstation
Bottle holderBottle holder for storage of liquids safely below the table top. Mounts to concept, concept crank and concept motor table frame.
Order No. 859063-35Bottle holder100 x Ø 100 mmMounts to upright.
Scale/carton tableSmall table for positioning of the scale or master carton box. Table top dimension 750 x 600 mm, adjustable in height by using tools. Also available as trolley.
Order No. C70141101Scale/carton table750 x 600 x 540 - 940 mm
Order No. C70141001Scale/carton table on wheels750 x 600 x 655 - 1055 mm
Roller conveyor segment for Packing tableMake life easy! Equip your packing table with a Sovella roller conveyor segment. The specially designed conveyor front rail guarantees productive and ergonomic operation, while the galvanized rolls last a lifetime. Conveyor is 600 mm wide and available in several lengths. Special dimensions and supporting structures upon request.
Order No. 859090-41Roller conveyor 1500 x 6001500 x 700 x 60 mm
Order No. 859092-41Roller conveyor 1800 x 6001800 x 700 x 60 mm
Drawer unit 45 with wheelsDrawer unit with 3 drawers (2 x 150,1 x 200) and 4 swivel wheels, 2 with brakes. Unit comes with rubber mat on top. Maximum total load 150Kg.
Order No. 60635027Drawer unit L-45/56-7 Maximum load per drawer: 30KgOpening 75% 450 x 520 x 685 mm
Order No. 60635307Drawer unit 45/56-7 Maximum load per drawer: 60KgOpening 100% 450 x 520 x 685 mm
Drawer unit 38Heavy duty metal drawer unit with two drawers and lock, suspended under table top. Fixing set required per table type.
Order No. 60535001Drawer unit 38 Maximum load 60KgOpening 100% 380 x 520 x 260 mm
Order No. 60535002Drawer unit 38 Maximum load 30KgOpening 75% 380 x 520 x 260 mm
86023935
85446335
85505335
www.sovella.nl 11
Module Max. roll Max. roll Max. Frame Order No. width diameter total dimensions roll weight
M1350 1200 mm 800 mm 200Kg 1380 x 715 x 1000 mm 859103-35M1500 1400 mm 800 mm 200Kg 1530 x 715 x 1000 mm 859105-35M1800 1700 mm 800 mm 200Kg 1830 x 715 x 1000 mm 859108-35
Module Cutting Max. roll Max. Frame Order No. width diameter total dimensions roll weight
M1350 1200 mm 800 mm 200Kg 1380 x 715 x 1130 mm 859113-41M1500 1400 mm 800 mm 200Kg 1530 x 715 x 1130 mm 859115-41M1800 1700 mm 800 mm 200Kg 1830 x 715 x 1130 mm 859118-41
Module Cutting Max. roll Max. Frame Order No. width diameter total dimensions (with two roll rolls) weight
M1350 1000 mm 600 mm 200Kg 1380 x 870 x 1500 mm 859313-35M1500 1200 mm 600 mm 200Kg 1530 x 870 x 1500 mm 859315-35M1800 1600 mm 600 mm 200Kg 1830 x 870 x 1500 mm 859318-35
Roll dispenser standRoll dispenser stand for one roll, freestanding.
Roll dispenser stand, mobileRoll dispenser stand for one roll on four swivel wheels, 2 with brake.
Cutting standStand for up to three rolls, comes standard with two roll holder sets and one cutting unit on arms.
Extra roll holder set, completeExtra roll holder set for cutting stand comes with Ø 38 mm tube.
Order No. 859040-35M1350 Roll holder set, complete1310 x Ø 38 mm
Order No. 859041-35M1500 Roll holder set, complete1455 x Ø 38 mm
Order No. 859042-35M1800 Roll holder set, complete1760 x Ø 38 mm
Extra cutting set, completeExtra cutting unit set for cutting stand comes with one cutting unit and one pair of arms.
Order No. 859123-35M1350 Cutting unit set, complete1360 x 490 x 610 mm
Order No. 859125-35M1500 Cutting unit set, complete1510 x 490 x 610 mm
Order No. 859128-35M1800 Cutting unit set, complete1810 x 490 x 610 mm
Sovella Nederland BV
Boezemweg 26
2641 KH PijnackerTel. 015‐3694170
Fax 015‐3694663
E‐mail [email protected]
www.sovella.nl
