Packer Service Tools

Packer Service Tools

Product Catalog

Discover Premium Performance.

Contents

1© 2010 Weatherford. All rights reserved.

Introduction

About Weatherford . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Weatherford’s Packer Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Retrievable Bridge Plugs

WRP Bridge Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8TS-U Retrievable Bridge Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10TS Spring-Loaded Retrieving Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12B and BII Retrievable Bridge Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Well Suspension Bridge Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Bridge Plugs and Cement Retainers

FracGuard® 300 Series Composite Bridge Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18FracGuard 300 Series Composite Frac Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20FracGuard Shorty Bridge Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22FracGuard Shorty Composite Frac Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24FracGuard Composite Setting Sleeve for Composite Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26FracGuard Convertible Bridge/Frac Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28FracGuard Dual-Check Pumpdown Roller Frac Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30FracGuard High-Flowback Frac Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32FracGuard Pumpdown Composite Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34FracGuard Sand Biter™ Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36FracGuard Slim-OD Bridge and Frac Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38FracGuard Surface Pipe Cementing Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40BRS Bit-Release Sub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42958DB-8 through 2000DB-2 Bridge Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44DB-10 Bridge Plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46HBP Hydro-Mechanical Bridge Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48HM-1 Bridge Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50HM-2 Bridge Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52PCR Cement Retainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54238CR-400CR Cement Retainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Contents

2 © 2010 Weatherford. All rights reserved.

Retrievable Service PackersHD Compression-Set Retrievable Service Packer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58HDL Compression-Set Retrievable Packer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60DLT Compression-Set Service Packer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62CSTH Storm Packer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6432-A Tension-Set Packer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Stradaset II Compression-Set Packer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Gas-Vent Pumping Packer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70V-III Unloader Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71ECV Storm Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72ANC Storm Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74SC Tension Unloader Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75B Perforation Washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76B Rotational Unloader Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78ARM Selective-Treating Packer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80TTV Tubing Test Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82Tubing Test Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Series 8000 Casing Scraper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84


Introduction

About Weatherford

A Full Range of Completion Products and Services•Packers•Liners• InflatablePackers•Safety Valves•Downhole Control Valves•Expandable Technology•Conventional Sand Screens•Flow Control Systems•ArtificialLiftSystems• Intelligent Wells

The Weatherford PortfolioWeatherford International Ltd. is one of the largest global providers of innovative mechanical solutions, technology and services for the drilling and production sectors of the oil and gas industry. An industry leader for more than 55 years, Weatherford has built its reputation by providing high-quality products, responsive client service, and a commitment to safety in all aspects of operations. Our continued pledge to our clients is to provide production-enabling technologies and superior services that maximize production. Our vast global infrastructure enables us to offer one of the industry’smostdiversifiedportfoliosofproductsandservicesfordrilling,intervention, completion and production applications.Since 1998, Weatherford has strategically combined an array of well-known brands from the completions sector with one goal in mind: making your reservoir recovery operations more productive.

Discover Breadth and Depth of Completion TechnologyWeatherford provides completion options with a broad range of products to meet every application—from the most basic to the extreme. Fully integratedandengineered,theseproductsadduptoaninfinitelyconfigurable,highlypracticalsystemforcompletionoptimization.


Introduction

About Weatherford

Engineering DepthWeatherford’s product engineering resources are based around the world. We also employ a range of engineers, designers and technical support staff whose breadth and depth of experience includes mechanical and electrical engineering to highly specialized disciplines of optical science and metallurgy.

Industry-leading Testing, R&D and Training FacilitiesWeatherford has two of the largest research-and-development

(R&D), testing and training facilities in the industry. Our Houston-based Technology & Training Center houses the world’s most advanced safety valve engineering lab and three hot cells that simulate downhole conditions. Our Aberdeen facility is Europe’s foremost research, testing and development center for offshore well services. This facility includes two fully operational drilling rigs and test boreholes.

Manufacturing InfrastructureWeatherford’scertifiedmanufacturingfacilitiesarestrategicallylocatedthroughout the world. Since 2002, we have doubled our completions manufacturing capacity by adding new facilities, expanding existing ones, andinvestingsignificantlyinthelatestmachiningequipment.


Introduction

About Weatherford

Enterprise Excellence ProgramWeatherford has created a culture focused on prevention to achieve error-free performance and empowerment of all employees to achieve continuous improvement in all work processes.

Our Enterprise Excellence Program describes how we will•comply with all applicable laws and

regulations of the areas where we operate or exceed compliance where our stated expectations require;

•conduct all operations in a way that promotes safe work practices and minimizes risk to our employees, our communities and the environment;

• implement the programs, training and internal controls necessary for achieving our goals.

Our enterprise culture has one objective and a single commitment. We empower each employee to achieve complete internal and external client satisfactionandtoconformtomutuallyagreedrequirementsthefirsttime,every time, while protecting the well-being of all personnel, assets and the environment.For our clients, our excellence culture results in advantages such as greaterefficiencythroughmoreeffectiveplanningandcollaborationto ensure that mutually agreed requirements are being met and the elimination of nonconformance in the delivery of products and services, assuming both technical integrity and safe work practices.


Weatherford’s Packer Systems

Introduction

Discover Premium Performance.Weatherford has more than 40 years of experience in providing packer systems and completion accessories for a wide range of downhole conditions, including the most demanding applications, such as high pressure/high temperature, high H2S and CO2 and deepwater.From mechanical, hydraulic, wireline, multistring and feed-through packers to permanent and retrievable sealbore packers, Weatherford offers breadth and depth of packer tools and technology, custom-engineered completion systems to meet any challenging environment, and engineering expertise.

Packer Service ToolsWeatherford offers a variety of retrievable and permanent bridge plugs, frac plugs, and cement retainers. Our offering includes our exclusive FracGuard® series composite plugs.FracGuard series composite plugs isolate the formation above the plug in fracturing operations in both single- and multiple-zone stimulation applications which saves operational time while protecting sensitive formations. FracGuard is excellent for underbalanced operations, highly-deviated, horizontal or multilateral wellbore and at high temperatures for extended periods of time.

Weatherford is constantly and consistently developing new technologies for today’s demanding applications. Throughout this catalog you’ll discover our latest developments for intelligent completions, high pressure/high temperature and thermal applications.



WRP Bridge Plug

Weatherford’s WRP bridge plug is a retrievable plug set by conventional wireline or a hydraulic setting tool, such as the HST, to isolate temporarily the lower part of a wellbore. The standard caged, bidirectional carbide slips provide long life and durability and simple, effective anchoring to the casing.The compact plug enables easy retrieval on tubing, coiled tubing, or sand line with a retrieval tool. After the tool engages the top of the plug, the equalizing valve opens before the plug is released, preventing it from moving with differential pressure. Elastomeric sealing elements hold pressure from above and below.

Applications•Zonal isolation•Wellhead repair and replacement•Casing-pressure testing•Acidizing, fracturing, and cementing

Features,AdvantagesandBenefits• The compact design enables deployment through tight doglegs and

short lubricators.• The swab-resistant packing element enables a faster run in, reducing the

rig time to set the plug.• The bridge plug can be set by wireline, coiled tubing, or a hydraulic

setting tool and retrieved by a sand line or coiled tubing, depending on the well conditions.

• The straight-pull release provides simple operation on the rig.• The rotational safety release enables the operator to release the plug if thestraightpullhasdifficulties,reducingrigtime.

• The equalizing valve opens before the plug is released to prevent movement from differential pressure and enable safe plug retrieval.

•The overshot washes to the gauge ring for easy, dependable retrieval.



WRP Bridge Plug

SpecificationsCasing Plug

OD (in./mm)

Weight (lb/ft, kg/m)

ID (in./mm) Maximum OD

(in./mm)Product Number

Minimum Maximum Collet Latch J-Latch

3-1/2 88.9

10.2 15.2 2.992

76.10

2.992 76.10

2.781 70.64 35WRP.1002 —

7.7 to 9.2 11.5 to 13.7

3.068 77.93

2.867 72.82 35WRP.1001 —

4-1/2 114.3

9.5 to 13.5 14.1 to 20.1

3.910 99.31

4.090 103.89

3.771 95.78 43WRP.1001 43WRP.1002

5 127.0

15.0 to 18.0 22.3 to 26.8

4.250 107.95

4.408 111.96

4.125 104.78 43WRP.1003 43WRP.1004

11.5 to 15.0 17.1 to 22.3

4.408 111.96

4.560 115.82

4.250 107.95 43WRP.1007 —

5-1/2 139.7

26.0 38.7

4.408 111.96

4.560 115.82

4.250 107.95 43WRP.1007 —

20.0 to 23.0 29.8 to 34.2

4.625 117.48

4.778 121.36

4.500 114.30 45WRP.1001 45WRP.1002

15.5 to 20.0 23.1 to 29.8

4.778 121.36

4.950 125.73

4.641 117.88 45WRP.1003 45WRP.1004

13.5 to 15.5 20.1 to 23.1

4.950 125.73

5.190 131.83

4.781 121.44 45WRP.1005 45WRP.1006

6 152.4

26.0 38.7

4.950 125.73

5.190 131.83

4.781 121.44 45WRP.1005 45WRP.1006

6-5/8 168.3

24.0 to 32.0 35.7 to 47.6

5.610 142.49

5.921 150.39

5.484 139.29 45WRP.1009 45WRP.1010

24.0 35.7

5.830 148.08

5.937 150.80

5.656 143.66 47WRP.1001 47WRP.1002

17.0 to 20.0 25.3 to 29.8

5.938 150.83

6.135 155.83

5.812 147.62 47WRP.1003 47WRP.1004

7 177.8

38.0 56.6

5.830 148.08

5.937 150.80

5.656 143.66 47WRP.1001 47WRP.1002

32.0 to 35.0 47.6 to 52.1

5.938 150.83

6.135 155.83

5.812 147.62 47WRP.1003 47WRP.1004

26.0 to 29.0 38.7 to 43.2

6.136 155.85

6.276 159.41

5.968 151.59 47WRP.1005 47WRP.1006

23.0 to 26.0 34.2 to 38.7

6.276 159.41

6.366 161.70

6.078 154.38 47WRP.1007 47WRP.1008

17.0 to 20.0 25.3 to 29.8

6.456 163.98

6.578 167.08

6.266 159.16 47WRP.1009 47WRP.1010

7-5/8 193.7

33.7 to 39.0 50.2 to 58.0

6.579 167.11

6.797 172.64

6.453 163.91 47WRP.1011 47WRP.1012

24.0 to 29.7 35.7 to 44.2

6.798 172.67

7.025 178.44

6.672 169.47 47WRP.1013 47WRP.1014

20.0 to 24.0 29.8 to 35.7

7.025 178.44

7.125 180.98

6.812 173.02 47WRP.1015 47WRP.1016

8-5/8 219.1

20.0 to 28.0 29.8 to 41.7

8.017 203.63

8.097 205.66

7.781 197.64 49WRP.1005 49WRP.1006

9-5/8 244.5

47.0 to 53.5 69.9 to 79.6

8.343 211.91

8.681 220.50

8.218 208.74 51WRP.1001 51WRP.1002

40.0 to 47.0 59.5 to 69.9

8.681 220.50

8.835 224.41

8.437 214.30 51WRP.1003 51WRP.1004

29.3 to 36.0 43.6 to 53.6

8.836 224.43

9.063 230.20

8.593 218.26 51WRP.1005 51WRP.1006



TS-U Retrievable Bridge Plug

Weatherford’sTS-Uretrievablebridgeplugisasuperior,field-provenpacker plug for treating and testing multiple, selected high-pressure zones. Theflexibledesignenablesdeploymentinshallowapplications,suchaswellhead testing, or in deep, high-pressure environments.The plug is set in tension or compression, and the large internal bypass prevents swabbing during running and retrieval. The bypass closes during plug setting and opens to equalize pressure before releasing the upper slips for retrieval. The standard packing element is rated at 275°F (135°C).

Applications•Wellhead testing•Treating and testing multiple, selected zones•Deep, high-pressure testing•Squeeze cementing•Fracturing•Temporary zonal isolation

Features,AdvantagesandBenefits• The one-quarter right turn to set the plug and one-quarter right turn to

release it provide reliable operation, especially in applications with limited rotational movement.

• The large, internal bypass equalizes pressure before releasing the upper slips for safe plug retrieval.

Options•Plugs with a left-turn set and right-turn release are available by

special order.•Elastomeric elements are available for hostile environments.



TS-U Retrievable Bridge Plug


OD (in./mm)


ID (in./mm) OD

(in./mm)Product Number Retrieving ToolMinimum Maximum

4-1/2 114.3

9.5 to 13.5 14.1 to 20.1

3.920 99.57

4.090 103.89

3.750 95.25 725-45-000 577-45-000

5 127.0

11.5 to 15.0 17.1 to 22.3

4.408 111.96

4.560 115.82

4.125 104.78 725-50-006

577-50-00018.0 to 20.8 26.8 to 31.0

4.156 105.56

4.276 108.61

4.000 101.60 725-52-006

5-1/2 139.7

14.0 to 20.0 20.8 to 29.8

4.778 121.36

5.004 127.10

4.625 117.48 725-55-000 577-55-000

20.0 to 23.0 29.8 to 34.2

4.670 118.62

4.778 121.36

4.500 114.30 725-56-000 577-56-000

6-5/8 168.3

24.0 to 32.0 35.7 to 47.6

5.675 144.15

5.921 150.39

5.500 139.70 725-66-013 577-65-000

7 177.8

20.0 to 26.0 29.9 to 38.7

6.276 159.41

6.456 163.98

5.969 151.61 725-70-000

577-70-00026.0 to 32.0 38.7 to 47.6

6.094 154.79

6.276 159.41

5.875 149.23 725-71-000

7-5/8 193.7

24.0 to 29.7 35.7 to 44.2

6.875 174.63

7.025 178.44

6.672 169.47

725-75-004P

577-75-00033.7 to 39.0 50.2 to 58.0

6.625 168.28

6.765 171.83

6.453 163.91 725-76-000

8-5/8 219.1

28.0 to 40.0 41.7 to 59.5

7.725 196.22

8.017 203.63

7.531 191.29 725-85-000 577-85-000

9-5/8 244.5

32.3 to 43.5 48.1 to 64.7

8.755 222.38

9.001 228.63

8.500 215.90 725-96-001

577-95-00040.0 to 53.5 59.5 to 79.6

8.535 216.79

8.835 224.41

8.250 209.55 725-95-005



TS Spring-Loaded Retrieving Tool

Weatherford’s TS spring-loaded retrieving tool runs and retrieves the TS-U retrievable bridge plug. A one-quarter left turn of the tool releases the plug. Thefield-proventooldesignminimizestheriskofitsbreakingawayfromthe plug during retrieval. The running J-pins can exit the tool only after the spring force is overcome.

Applications•Running and retrieving a TS-U plug

Features,AdvantagesandBenefits•The simple four-part tool automatically attaches to the plug during weight

set-down and requires only a one-quarter turn for release, making the tool easy to run and redress.

•The spring-loaded design minimizes tool separation from the plug, reducing the possibility that the plug breaks away during running and retrieval.

•The one-quarter left turn for plug release provides reliable setting in applications with limited rotational movement.

•The plug locks in place on the J-track with the heavy-duty spring and positive loading, preventing premature plug release and misruns and saving time.

•The strong compression spring keeps the plug J-pins securely locked in the tool jay until enough weight collapses the spring, enabling tool removal.



TS Spring-Loaded Retrieving Tool

SpecificationsCasing

Size (in./mm)

Maximum OD

(in./mm)

Minimum ID

(in./mm)

Box-Up Thread Connection

(in.)Product Number

4 101.6

3.297 83.74

1.857 47.17 2-3/8 EU1 8 RD2 577-40-000

4-1/2 114.3

3.766 95.66

1.984 50.39 2-3/8 EU 8 RD 577-45-000

5 127.0

4.141 105.18

1.984 50.39 2-3/8 EU 8 RD 577-50-000

5-1/2 139.7

4.516 114.71

1.984 50.39 2-3/8 EU 8 RD 577-55-000

2.359 59.92 2-7/8 EU 8 RD 577-56-000

6-5/8 168.3

5.438 138.13

2.500 63.50 2-7/8 EU 8 RD 577-65-000

7 177.8

5.875 149.23

2.500 63.50 2-7/8 EU 8 RD 577-70-000

7-5/8 193.7

6.250 158.75

2.500 63.50 2-7/8 EU 8 RD 577-75-000

8-5/8 219.1

7.500 190.50

2.500 63.50 2-7/8 EU 8 RD 577-85-000

9-5/8 244.5

8.000 203.20

2.500 63.50 2-7/8 EU 8 RD 577-95-000

1External upset2Round



B and BII Retrievable Bridge Plugs

Weatherford’s B and BII retrievable bridge plugs selectively isolate zones for acidizing, fracturing, squeeze cementing, and testing in shallow applications. Each plug can also inexpensively and temporarily plug a well for the installation or removal of wellhead equipment. The BII plug has enclosed slips for easy entry into liners.Both plugs operate identically. Pressure from above or below the plug sets the slips and anchors the plug. The large controlled bypass enables the plug to be run and then retrieved by tubing or a sand line without a swabbing risk.

Applications•Deviated wells and liners•General service•Acidizing•Fracturing•Squeeze cementing•Testing•Temporary abandonment

Features,AdvantagesandBenefits•The plug may be run with a service packer to straddle zones, saving the

time of two runs to set a plug and a retrievable service packer.•Theoptionalrightorleftretrievingtoolprovidesflexibilityontherig.•The straight pull to release enables the plug to be retrieved reliably in a

highly deviated well and liner.•The plug can be retrieved on a sand line or tubing, depending on the well

conditions.

Options•Bothplugsareavailablewithballcatcherstopreventretrievaldifficulties.

B BII



B and BII Retrievable Bridge Plugs

SpecificationsCasing Bridge Plug

OD (in/mm)


ID (in/mm) Maximum

OD (in/mm) B BIIMinimum Maximum

4-1/2 114.30

9.5 to 13.5 14.1 to 20.1

3.920 99.57

4.090 103.89

3.750 95.25 173167 —

5 127.00

18.0 to 20.8 26.8 to 31.0

4.156 105.56

4.276 108.61

4.000 101.60 132841 715-52-000

13.0 to 18.0 19.3 to 26.8

4.276 108.61

4.494 114.15

4.125 104.78 133542 715-50-000

5-1/2 139.70

17.0 to 23.0 25.3 to 34.2

4.670 118.62 4.892

124.26

4.500 114.30 — 174472

17.0 to 20.0 25.3 to 29.8

4.778 121.62

4.625 117.48 — 174158

14.0 to 17.0 20.8 to 25.3

4.892 124.26 5.012

127.30

4.750 120.65 — 174231

14.0 to 15.5 20.8 to 23.1

4.950 125.73

4.625 117.48 168355 174234

6-5/8 168.28

20.0 to 28.0 29.8 to 41.7 5.791

147.09

6.049 153.64 5.625

142.88

— 793265

24.0 to 28.0 35.7 to 41.7

5.921 150.39 173175 —

7 177.80

26.0 to 29.0 38.7 to 43.2

6.184 157.07

6.276 159.41 5.875

149.23

793261 —

17.0 to 23.0 25.3 to 34.2

6.366 161.70

6.538 166.07 — 793255

7-5/8 193.68

24.0 to 29.0 35.7 to 43.2

6.625 168.28

7.025 178.44

6.500 165.10 132538 —

8-5/8 219.08

28.0 to 40.0 41.7 to 59.5

7.725 196.22

7.825 198.76

7.500 190.50 793248 —

9-5/8 244.48

43.5 to 53.5 64.7 to 79.6

8.535 216.79

8.755 222.38

8.250 209.55 166357 —

10.8 274.32

40.5 to 65.7 60.3 to 97.8

9.560 242.82

10.050 255.27

9.313 236.55 140620 —

13.4 340.36

54.5 to 72.0 81.1 to 107.1

12.347 313.61

12.715 322.96

12.000 304.80 166380 —



Well Suspension Bridge Plug

Weatherford’s well suspension bridge plug is a high-pressure valve used with the PST packer to plug the wellbore temporarily during operations. With the valve open, the plug enables testing below it while containing pressures from below inside the work string. With the valve closed, the string and annulus can be tested independently.

Applications•Well-suspension operations•Testing•Acidizing•Fracturing

Features,AdvantagesandBenefits•The overshot seals enable pressure testing to check the plug integrity

from below before overshot pulling, eliminating plug pulling and redressing because of a leak.

•The overshot can be locked onto the valve for work-string testing before valve opening, ensuring string integrity.

•Pressure below the plug is contained within the work string during equalization, ensuring safety and well control in shallow applications.

•The work string and annulus can be tested independently after the valve is closed, ensuring that the plug holds pressure above and below for safety and well control.



Well Suspension Bridge Plug

Specifications

CasingMaximum Plug OD (in./mm)

Thread Connection (in.) Rating

Tensile Strength (lb/kg)

Product Number

Size (in./mm)

Weight Range (lb/ft, kg/m) Top Box Bottom Pin

Pressure (psi/kPa)

Temperature (°F/°C)

9-5/8 244.5

47.0 to 53.5 69.9 to 79.6

8.218 208.74

3 1/2-in. IFa

5 1/2-in. 8 RDb LTCc

5,000 34,474

250 121

30,000 13,608

1148665

10-3/4 273.1

65.7 to 79.2 97.8 to 117.9

9.000 228.60 1141635

13-3/8 339.7

48.0 to 72.0 71.4 to 107.1

12.066 306.48

8 5/8-in. 8 RD STCd 1141645

aInternalflushbRoundcLong casing threaddShort casing thread



Weatherford’s FracGuard 300 series composite bridge plugs isolate the formation above the plug for fracturing operations in both single- and multiple-zone stimulation applications. Operational integrity at high temperatures for extended periods of time sets FracGuard plugs apart. They can be run on tubing, drillpipe, coiled tubing, or wireline using conventional bridge plug setting equipment. FracGuard bridge plugs excel in stacked applications, achieving reliable operation and rapid drillout using conventional drilling methods and equipment, including coiled-tubing drilling motors. They work extremely well in underbalanced applications and in highly deviated, horizontal, or multilateral wellbores.FracGuardplugsareavailableinmorestandardconfigurationsthanmostcompetitors’plugs—for3-1/2-to95/8-in.casing.Theflexibilityofthesetools can save operational time while protecting sensitive formations.

Applications•Single- or multiple-zone stimulation•Vertical, deviated, horizontal, or multilateral wellbore•Underbalanced, multiple-zone completions•Temporary well plugging

Features,AdvantagesandBenefits•Temperature rating to 300°F (149°C). •Pressure rating to 10,000 psi (689 bar). •Plugs hold full differential pressure from above and below. •Beveled bottom prevents body from spinning, thus decreasing

drillout time.•Composite construction produces lightweight cuttings when drilled out

and allows running of multiple plugs to isolate a series of zones, reducing rig time and the number of operations required to fracture multiple zones in the same well.

•Composite construction and lack of wrought metal parts (such as brass or steel) save time by allowing quick drillout with conventional tri-cone or junk-mill bits and result in lightweight cuttings that lift easily and minimize plugging of surface equipment.

FracGuard® 300 Series Composite Bridge Plugs



FracGuard® 300 Series Composite Bridge Plugs

SpecificationsCasing Pluga

Size (in./mm)

Weight Range

(lb/ft, kg/m)

ID (in./mm) Maximum

OD (in./mm)

Pressure Rating

(psi/kPa) Product NumberMinimum Maximum3-1/2 88.9

9.20 to 10.20 13.69 to 15.18

2.922 74.22

2.992 76.00

2.690 68.33

10,000b

68,948 CBP-35H-PLUG10K

4-1/2 114.3

9.50 to 13.50 14.14 to 20.09

3.920 99.57

4.090 103.89

3.660 92.96

6,000 41,369 CBP-45-PLUG6K

10,000b


12,000c

82,737 CBP-45-PLUG12K

15.10 to 16.60 22.47 to 24.70

3.754 95.35

3.826 97.18

3.595 91.31

10,000b


12,000c

82,737 CBP-46-PLUG12K

15.10 to 18.80 22.47 to 27.98

3.640 92.46

3.440 87.38

10,000b

68,948 CBP-44-PLUG10K

12,000c

82,737 CBP-44-PLUG12K

5 127.0

11.50 to 18.00 17.11 to 26.79

4.276 108.61

4.560 115.82

3.940 100.08

10,000b

68,948 CBP-50-PLUG-10K

5-1/2 139.7

15.50 to 23.00 23.07 to 34.23

4.670 118.62

4.950 125.73

4.375 111.13

6,000 41,369 CBP-55-PLUG6K-SPECD

10,000b


12,000c

82,737 CBP-55-PLUG12K

7 177.8

20.00 to 32.00 29.76 to 47.62

6.094 154.79

6.456 163.98

5.800 147.32

10,000b

68,948 CBP-70-PLUG10K

7-5/8 193.7

26.40 to 42.50 39.29 to 63.25

6.501 165.13

6.969 177.01

6.200 157.48

8,000d

55,158 CBP-76-PLUG8K

9-5/8 244.5

36.00 to 53.50 53.57 to 79.62

8.535 216.79

8.921 226.59

8.250 209.55

8,000d

55,158 CBP-96-PLUG8K

aThe temperature rating is 300°F (149°C).b10,000-psi (68,948-kPa) rating from above; 8,000-psi (55,158-kPa) rating from below. c12,000-psi (82,737-kPa) rating from above; 10,000-psi (68,948-kPa) rating from below. Supported casing may be required with maximum differential pressure.d8,000-psi (55,158-kPa) rating from above; 6,000-psi (41,369-kPa) rating from below. Supported casing may be required with maximum differential pressure.



Weatherford’s FracGuard 300 series composite frac plugs isolate the formation above the plug for fracturing operations in both single- and multiple-zonestimulationapplications,whileallowingflowbackthroughthebody for pressure equalization or production. These plugs are available for31/2-to95/8-in.casingandineitherintegral-ballorfloatingtop-ballconfigurationsformostsizes.Thetop-balldesignprovidesalargerflowarea for higher return rates. The integral design keeps the ball in place insidetheplug.Theflexibilityofthesetoolscansaveoperationaltimewhileprotecting sensitive formations.FracGuard 300 series frac plugs excel in stacked applications, achieving reliable operation and rapid drillout using conventional drilling methods and equipment, including coiled-tubing drilling motors. They work extremely well in underbalanced applications and in highly deviated, horizontal or multilateral wellbores.

Applications•Single- or multiple-zone stimulation•Vertical, deviated, horizontal, or multilateral wellbores•Underbalanced, multiple-zone completions•Temporary well plugging

Features,AdvantagesandBenefits•Temperature rating to 300°F (149°C).•Pressure rating to 10,000 psi (689 bar).•Plugs hold full differential pressure from above.•Checkballallowsbackflowthroughthebodyforequalizationor

production.•Beveled bottom prevents body from spinning, thus decreasing

drillout time.•Composite construction produces lightweight cuttings when drilled out

and allows running of multiple plugs to isolate a series of zones, reducing rig time and the number of operations required to fracture multiple zones in the same well.

•Composite construction and lack of wrought metal parts (such as brass or steel) save time by allowing quick drillout with conventional tri-cone or junk-mill bits and result in lightweight cuttings that lift easily and minimize plugging of surface equipment.

FracGuard® 300 Series Composite Frac Plugs



FracGuard® 300 Series Composite Frac Plugs

SpecificationsCasing Frac Plug

Size (in./mm)

Weight Range

(lb/ft, kg/m)

Minimum ID

(in./mm)

Maximum ID

(in./mm)

Maximum OD

(in./mm)

Pressure Rating

(psi/kPa)

Temperature Rating (F°/C°))

Product Number

Internal Ball Top Ball

3-1/2 89

12.95 19.3

2.75 69.85

2.7569.850

2.56065.02

10,00069

300149 CBP-36-FRAC10K —

4-1/2114.3

9.5 to 13.514.1 to 20.1

3.9299.57

4.09103.89

3.66092.96

10,00069

300149

CBP-45H-FRAC10K CBP-46-FRAC10K-TBD

12,00083 CBP-45-FRAC12K —

15.1 to 16.622.5 to 24.7

3.75495.35

3.82697.18

3.59591.31

10,00069 CBP-46H-FRAC10K CBP-46-FRAC10KTB

12,00083 CBP-46-FRAC12K —

15.1 to 18.822.5 to 28.0

3.6492.46

3.82697.18

3.44087.38

10,00069 CBP-44-FRAC10K CBP-44-FRAC10KTB

5-1/2139.7

15.5 to 23.023.1 to 34.2

4.670118.62

4.950125.73

4.375111.12

10,00069 300

149

CBP-55H-FRAC10K CBP-55-FRAC10KTB

12,00083 CBP-55-FRAC12K —

7177.8

20.0 to 32.029.8 to 47.6

6.094154.79

6.456163.98

5.800147.32

12,00083

300149 CBP-70-FRAC10K CBP-70-FRAC10K-TB

7-5/8193.7

26.4 to 39.039.3 to 58.0

6.625168.28

6.969177.01

6.200157.48

8,000*55

300149 CBP-76-FRAC8K —

9-5/8244.5

36.0 to 53.553.6 to 79.6

8.535216.79

8.921226.59

8.250209.55

8,000*55

300149 CBP-96-FRAC8K —

*Supported casing may be required with maximum differential pressure.



FracGuard® Shorty Bridge Plug

Weatherford’s FracGuard Shorty series composite bridge plug isolates the formation above the plug for fracturing operations in both single- and multiple-zone stimulation applications. FracGuard plugs work extremely well in underbalanced applications and in highly deviated, horizontal, or multilateralwellbores.Theflexibilityofthesetoolssavesoperationaltimewhile protecting sensitive formations.FracGuard bridge plugs excel in stacked applications, achieving reliable operation and rapid drillout using conventional drilling operations, including coiled-tubing drilling motors. All FracGuard bridge plugs can be run on tubing, drillpipe, coiled tubing, or wireline using conventional bridge-plug setting equipment.


Features,AdvantagesandBenefits•Half the length of the conventional plug.•Temperature rating to 250º F (121º C).•Pressure rating to 6,000 psi (413 bar).•Plugs hold full differential pressure from above and below.•Beveled bottom prevents body from spinning, thus decreasing

drillout time.•Allows multiple plugs to be run to isolate a series of zones.•Drill-up time is faster than with standard composite plugs.•Saves time by allowing quick drillout with conventional tricone or

junk-mill bits.•Lightweight cuttings lift easily and minimize plugging of

surface equipment.•Shorter design minimizes amount of debris in well.•Allows underbalanced drillout of multiple plugs, protecting

sensitive formations.



FracGuard® Shorty Bridge Plug

SpecificationsCasing Bridge Plug

Size (in/mm)

Weight Range (lb/ft, kg/m)

Minimum ID (in./mm)

Maximum ID (in./mm)

Maximum OD (in./mm)

Pressure Rating (psi/MPa)

Temperature Rating (°F/°C)

Product Number

4-1/2114.3

11.60 to 13.517.26 to 20.09

3.9299.57

3.958100.53

3.6692.96 6,000

41250°121°

1146268

15.10 to 18.8022.47 to 27.98

3.6492.46

3.82697.18

3.4487.38 1181025




FracGuard® Shorty Composite Frac Plug

Weatherford’s FracGuard Shorty series composite frac plug isolates the formation above the plug for fracturing operations in both single- and multiple-zonestimulationapplications,allowingflowbackthroughthebodyfor pressure equalization or production. The FracGuard Shorty frac plug is half the length of the conventional plug and comes with choice of an integralballorafloatingtopball.Thetop-balldesignprovidesalargerflowareaforhigherreturnrateswhiletheintegraldesignkeepstheballinplaceinsidetheplug.Theflexibilityofthese tools saves operational time while protecting sensitive formations.FracGuard frac plugs excel in stacked applications, achieving reliable operation and rapid drillout using conventional drilling operations, including coiled-tubing drilling motors. FracGuard Shorty frac plugs can be run on tubing, drillpipe, coiled tubing, or wireline using conventional frac-plug setting equipment.


Features,AdvantagesandBenefits•FracGuard Shorty plugs are half the length of the conventional plug with

temperature rating to 250°F (121°C) and pressure rating up to 6,000 to 7,500 psi (413 to 516 bar).

•Theseplugsholdfulldifferentialpressurefromabove,allowingflowthrough the mandrel from below.

•The tool’s beveled bottom prevents the body from spinning, decreasing drillout time.

•The FracGuard Shorty design permits multiple plugs to be run, isolating a series of zones, and also enables underbalanced drillout of multiple plugs, protecting sensitive formations.

•Theplugallowsbackflowthroughthebodyforequalizationorproduction.•The tool’s shorter design minimizes the amount of debris in the well and

its lightweight cuttings lift easily, reducing the risk of surface equipment plugging.



FracGuard® Shorty Composite Frac Plug

SpecificationsCasing Frac Plug

Size (in./mm)

Weight Range (lb/ft, kg/m)

Minimum ID

(in./mm)

Maximum ID

(in./mm)

Maximum OD

(in./mm)

Pressure Rating*

(psi/MPa)


Part Number

Internal Ball

Top Ball

4-1/2 114.3

11.6 to 13.5 17.26 to 20.09

3.92 99.57

3.958 100.53

3.66 92.96

6,000 413

250 121

1171155 –

7,500 516 – 1151476

15.10 to 18.80 22.47 to 27.98

3.64 92.46

3.826 97.18

3.44 87.38

6,000 413 1185633 –




Weatherford’s FracGuard composite setting sleeve for composite plugs is used to allow perforation stimulation above the composite plug to proceed simultaneously as wireline setting tools are pulled from the well. The sleeve remains downhole with the composite plug, effectively reducing the overall OD of the remaining wireline assembly. This advantage over conventional steel sleeves allows pumping of perforation ball sealers past the wireline setting assembly as it is retrieved from the well when continuous stimulation is wanted. Currently the only setting sleeve on the market that is made of composite material, it is easily and quickly drilled out.

Applications•Multiple-zone perforate/fracture stimulations•Continuous fracturing applications

Features,AdvantagesandBenefits•Because the setting sleeve remains downhole after the composite

plug is set, the OD of the wireline assembly is greatly reduced. This advantage allows simultaneous retrieval of the wireline assembly while pumpingperforationballsealers.Theendbenefitiseliminationofthenonproductive time spent pulling large-OD steel sleeves from the well before stimulation.

•Leaving the composite sleeve in the hole reduces the chance of sticking the setting assembly and, in a plug-and-shoot operation, the perforating guns as well.

•The composite material is strong enough to withstand plug setting forces and saves time by allowing quick drillout with conventional tri-cone bits or junk mills. The composite material also results in lightweight cuttings that lift easily and minimize plugging of surface equipment.

FracGuard® Composite Setting Sleeve for Composite Plugs



FracGuard® Composite Setting Sleeve for Composite Plugs


Size (in./mm)

Weight Range (lb/ft)

Minimum ID

(in./mm)

Maximum ID

(in./mm)OD

(in./mm)

Pressure Rating Temperature Rating (°F/°C)

Product Number

Above (psi/MPa)

Below (psi/MPa)

4-1/2 114.30

15.1 to 16.6

3.754 95.35

3.826 97.18

3.595 91.31

9,000 62

7,000 48

300 149 898296



Weatherford’s FracGuard convertible bridge/frac plug combines the pressure-control design of a bridge plug with theflowbackcapabilityofafracplug,allinonetool.Itoperatesasabridgeplugwhensetsothatpressureabovethe plug can be reduced to perform the next perforate-and-stimulate operation, limiting the need for use of an expensive grease-injection head for pressure control. The unique valve assembly enclosed within the plug allows the operator to convert to a frac plug before or during the next fracturing operation without intervention. This patent-pending two-in-one capability is a unique advantage, available only with this tool.

Applications•Multiple-zone fracture stimulation completions

Features,AdvantagesandBenefits•Convertible construction offers the advantage of a bridge plug. The plug is run and set as a bridge plug, allowing

complete pressure control above the plug during perforating in stack-and-frac operations. •Convertible construction also allows for pressure control when this tool is run as a kill plug, eliminating the need

for pressure control while tripping in to drillout. The plug can be converted before drilling so that pressure under the plug can be reduced, limiting the need for expensive snubbing equipment and other pressure-control devices.

•Convertible construction also offers the advantage of a frac plug. The plug converts on demand to a top-check ball-fracplugsothatfracoperationsandsubsequentflowbackthroughtheplugcanoccurwithouttheneedforimmediate plug drillout. This advantage accelerates production readiness of the well.


Size (in./mm)


Minimum ID

(in./mm)

Maximum ID

(in./mm)

Maximum OD

(in./mm)

Pressure RatingTemperature

Rating (°F/°C) Product Number

Above (psi/Mpa)

Below (psi/Mpa)

4-1/2 114.3 9.5 to 13.5 3.92

99.574.09

103.893.67 93.22

10,000 69

8,000 55

300 149 CFP-45-CONV10K

5-1/2 139.70 15.50 to 23.00 4.670

118.624.950 125.73

4.375 111.13

10,000 69

8,000 55

300 149 CFP-55-CONV10K

FracGuard® Convertible Bridge/Frac Plug



FracGuard® Convertible Bridge/Frac Plug

Set bridge plug.Negative pressure-test above plug (optional).Plug isolates pressure

from zone below.

Perforate above plug.

Flow back through the frac plug.

Plug converts to a frac plug.Drop ball and frac zone above.Lower zone isolated from frac

pressure.



Weatherford’s FracGuard dual-check pumpdown roller frac plug ensures isolation integrity and saves rig time in horizontal applications. This plug is designed for multiple-zone fracture stimulation completions, especially in extended-reach horizontal and highly deviated wells, where the plug-and-gunassemblyisdeliveredbypumpingfluidsintothewell.Therollerfracplug features a bottom-mounted check valve so that a negative pressure check can be conducted to verify the integrity of the plug. Should the pressuretestfailortheperforationgunnotfire,thebottomcheckvalvealso allows pumping through the plug to deliver a second plug-and-gun assemblywithouthavingtoremovethefirstplug.Theuppercheckvalveisactivatedwhenacheckballisdroppedfromthesurface,preventingflowfrom above the plug. No other tool incorporates this unique pump- through feature.This plug also offers an upper check ball, dropped from the surface, as in a conventional top-ball frac plug, allowing pressure containment from above when needed for fracturing an upper zone.

Applications•Multiple-zone fracture stimulation completions, especially in extended-

reach horizontal and highly deviated wells

Features,AdvantagesandBenefits•Thecheckvalveonthebottomoftheplugpreventsfluidfromflowingupwardthroughtheplugwhileallowingfluidtobepumpedthroughfromabove. With this design, a negative pressure test can be conducted so thatplugintegritycanbeverifiedbeforefracturingoperationsbegin.

•The roller/wiper system creates a piston effect that uses pump pressure to convey the plug and its setting tool along with perforating guns, which allows plugging and shooting the well in the same trip for greaterefficiency.

• In the event of a primary plug or gun failure, the lower check valve allows pumping a second plug-and-gun assembly into place without removing thefirstplugandwithoutrunningcoiledtubingorjointedpipe.Withthisflow-throughcapability,thesecondtripcanberunasquicklyasthefirsttrip, saving rig time and averting the need and expense of alternative equipment, such as e-coil, coiled tubing, or wireline tractors.

FracGuard® Dual-Check Pumpdown Roller Frac Plug



FracGuard® Dual-Check Pumpdown Roller Frac Plug


Drift ID

(in./mm)

Plug

Size (in./mm)


Minimum ID

(in./mm)

Maximum ID

(in./mm)

Body OD

(in./mm)

Wiper OD

(in./mm)

Roller OD

(in./mm)


Pressure Rating

Frac Plug Product Number

Above (psi/MPa)

Below (psi/MPa)

4-1/2 114.30 11.6 4.000

101.604.000 101.60

3.875 98.43

3.660 92.96

3.845 97.66

3.875 98.43

300 149

10,000 69

8,000 55

CBP-45-FRAC10KTB-SPECP

5-1/2 139.70

15.5 to 23

4.670 118.62

4.950 125.73

4.545 115.44

4.375 111.13

4.410 112.01

4.545 115.44

350177

12,000 83

10,000 69

CBP-45-FRAC12K-MT-SPECG

17.0 4.892 124.26

4.892 124.26

4.767 121.08

4.375 111.13

4.625 117.48

4.767 121.08

300 149

10,000 69

8,000 55

CBP-55-FRAC10K-SPECJ



Weatherford’s FracGuardhigh-flowbackfracplugensuresmaximumgasproduction. Conventional composite frac plugs can erode during high-volumeflowbacksituations.Thedebrisfromtheerosioncancauseplugsfartherupthewelltoclog,restrictingorblockingflow.TheFracGuard high-flowbackfracplugfeaturesalargeborethatprovidesa91percentgreaterflowcapabilitythanthroughconventionalfracplugs.Analuminuminsertinthebottomoftheflowpassageresistserosionbyfracsandduring flowbackoperations.Together, these two features ensure maximum gas production from the well without the need for immediate drillout of the plug and eliminate the needforinterventionwithaservicerigtorestoreflowratesinresponsetoerosion-debris clogging.

Applications•Multiple-zone fracture stimulation completions in gas wells

Features,AdvantagesandBenefits•Largeflowpassageallowsincreasedgasproductionflowratesthrough

the plug and maintains maximum gas production rates without requiring immediate plug drillout.

•Smallaluminuminsertinthebottomoftheflowpassageoftheplugprevents erosion of the composite material that can clog plugs farther up the well. This advantage eliminates the nonproductive time and added expense of intervention operations.

•The composite body of the plug can be drilled as quickly as a standard composite plug, saving the additional rig time required for drilling out metal-body plugs.

FracGuard® High-Flowback Frac Plug



FracGuard® High-Flowback Frac Plug


Size (in./mm)


Minimum ID

(in./mm)

Maximum ID

(in./mm)OD

(in./mm)

Pressure Rating Temperature Rating (°F/°C)

Product Number

Above (psi/MPa)

Below (psi/MPa)

4-1/2 114.30

15.1 to 16.63.826 97.18

3.640 92.46

3.594 91.29 10,000

698,000

55350 177

CBP-46-FRAC10K-MT-SPECB

15.1 to 18.8 3.440 87.38

CBP-44-FRAC10K-MT-SPECA



Weatherford’s FracGuard pumpdown composite plug is run on standard wireline into highly deviated or horizontal wells, where e-coil or standard coiled tubing would typically be required. The ability to run this plug on wireline,assistedbypumppressure,significantlyacceleratesoperations,reduces costly rig time and eliminates the need for expensive wireline tractors.Inaddition,thepumpdownassemblycanbeconfiguredwithperforating guns above the setting tool so that the plug can be set and one or more zones perforated in one trip, reducing rig time.The system pushes the plug into horizontal sections using pump pressure on wireline. Pump rates of 6 to 12 bbl/min carry the plug and setting tools to target before setting. The plug runs at conventional wireline speeds in straight-hole sections and the patent-pending roller system reduces run-in friction on wireline in both straight and horizontal sections. The wiper system creates a pressure drop across the front of the plug, which carries the assembly into horizontal sections with low-pump rate.

Applications•Multiple-zone fracture stimulation completions, especially in extended-

reach horizontal and highly deviated wells•Medium- to high-pressure clear-water fracturing applications

Features,AdvantagesandBenefits•Drag-reducing design allows the plug to be run on wireline, accelerating

operations, reducing rig time, and eliminating the need for expensive wireline tractors.

•The wiper system creates a pressure differential across the top of the plug, which carries the assembly into horizontal sections with low-pump rate. This capability removes the time and costs associated with e-coil, coiled tubing, and wireline tractors.

•Jet ports above and below the wiper ring wash away debris ahead of the plugandcreatefluidbypasstoacceleratetrippinginthehole.Thejetports aid in running the plug past sand bridges and debris in horizontal sections, reducing the likelihood of premature plug setting and sticking.

•The roller/wiper system makes single-trip plugging and perforating possible by conveying perforating guns above the plug, enhancing operationalefficiency.

•The roller system also allows for standoff for the composite plug when running on coiled tubing in horizontal applications. This capability allows for a reduction in friction forces and limits damage to the plug. A hydraulic setting tool can be used to initiate setting of the plug, eliminating the need for e-coil.

•The pumpdown composite plug is rapidly milled out with conventional milling or drilling tools on coiled tubing or jointed pipe.

FracGuard® Pumpdown Composite Plug



FracGuard® Pumpdown Composite Plug

Options•The pumpdown plug is available in bridge plug, integral-ball plug, and top-ball plug versions.

SpecificationsFracGuard Pumpdown Frac Plug

Casing Frac Plug

Size (in./mm)


Minimum ID

(in./mm)

Maximum ID

(in./mm)

Plug OD

(in./mm)

Pump Down Ring

OD (in./mm)

Roller OD

(in./mm)

Pressure Rating

(psi/MPa)


Product Number

Internal Ball

Top Ball

4-1/2 114.3

11.6 4.00 101.6

4.00 101.6

3.66 92.96

3.845 97.66

3.875 98.43

10,000 69

300 149 826756 875234

13.5 3.92 99.57

3.92 99.57

3.66 92.96

3.765 95.63

3.795 96.39

10,000 69

300 149 1240465 1132690

12,000 83

350 177 __ 1218820

15.1 3.826 97.18

3.826 97.18

3.594 91.29

3.701 94.01

3.701 94.01

10,000 69

300 149 __ 1154726

12,000 83

350 177 __ 1205269

3.44 87.38

3.671 93.24

3.701 94.01

10,000 69

300 149 __ 1162279

5 127 18 4.276

108.614.276 108.61

3.94 100.01

4.121 104.67

4.151 105.44

10,000 69

300 149 __ 1231400

5-1/2 140

17 4.892 124.26

4.892 124.26 4.375

111.13

4.625 117.48

4.767 121.08 10,000

69300 149

803465 802865

23 4.67 118.62

4.67 118.62

4.41 112.01

4.545 115.44 914310 __

FracGuard Pumpdown Bridge PlugCasing Bridge Plug

Size (in./mm)


Minimum ID

(in./mm)

Maximum ID

(in./mm)

Plug OD

(in./mm)

Pump Down Ring

OD (in./mm)

Roller OD

(in./mm)

Pressure Rating

(psi/MPa)


Product Number

4-1/2 114.3

11.6 4.00 101.6

4.00 101.6

3.66 92.96

3.845 97.66

3.875 98.43

10000a

69300 149 826712

12,000b

83350 177 1226465

13.5 3.92 99.57

3.92 99.57

3.66 92.96

3.765 95.63

3.795 96.39

10,000a

69300 149 884441

12,000b

83350 177 1235933

15.1 3.826 97.18

3.826 97.18

3.594 91.29

3.701 94.01 3.701

94.0110,000a

69300 149

1155143

3.44 87.38

3.671 93.24 1217145

5 127 18 4.276

108.614.276 108.61

3.94 100.01

4.121 104.67

4.151 105.44

10,000a

69300 149 1124264

5-1/2 140

17 4.892 124.26

4.892 124.26

4.375 111.13

4.625 117.48

4.767 121.08

10,000a

69300 149 800900

20 4.778 121.36

4.778 121.36

4.375 111.13

4.528 115.01

4.653 118.19

12,000b

83350 177 1227008

23 4.67 118.62

4.67 118.62

4.375 111.13

4.41 112.01

4.545 115.44

10,000a

69300 149 876917

12,000b

83350 177 1224130

a10,000 psi (69 MPa) from above and 8,000 psi (55 MPa) rating from below.b12,000 psi (83 MPa) from above and 10,000 psi (69 MPa) rating from below.



Weatherford’s Sand Biter plug is designed to accelerate composite plug drillout in sand. Under normal composite plug drillout, the remnants of the composite plug fall to the top of the next plug downhole. The bevel on the bottom guide locks to the next plug, preventing rotation during drillout. In certain applications, however, underdisplaced frac sand accumulates below, and the plug remnants rest on the sand. Drilling spins the remnants, impeding drillout.Thespecializedbiting-toothprofileonthemuleshoebottomofthe Sand Biter plug, however, bites into the sand, preventing the spinning action and allowing drillout to proceed more quickly and easily.The Sand Biter plug is an adaptation of Weatherford’s proven composite plug.Thebiting-toothprofilecanbeincorporatedonallFracGuard plugs.

Applications•Multiple-zone fracturing jobs in which a large amount of sand is left in the

wellbore due to underdisplaced sand fracturing.

Features,AdvantagesandBenefits•The biting-tooth design on the muleshoe bottom of the plug grips

plug drillout remnants to prevent them from spinning during drillout. This advantage saves rig time by accelerating and simplifying drillout, especiallyinenvironmentsofhigh-sandflowback.

FracGuard® Sand Biter™ Plug



FracGuard® Sand Biter™ Plug


Size (in./mm)


Minimum ID

(in./mm)

Maximum ID

(in./mm)OD

(in./mm)

Pressure Rating Internal-Ball Frac Plug Bridge Plug

Above (psi/MPa)

Below (psi/MPa)


Product Number


Product Number

3-1/2 88.90

9.2 to 10.2

2.922 74.22

2.992 76.00

2.690 68.33

10,000 69

8,000 55 __ __

300 149

CBP-35H-PLUG10K-SM

350 177

CBP-35H-PLUG10K-MT-SM

4-1/2 114.30

9.5 to 13.5

3.92 99.57

4.09 103.89

3.66 92.96

10,000 69

8,000 55

300 149

CBP-45H-FRAC10K-SM

300 149

CBP-45H-PLUG10K-SM

350 177

CBP-45H-PLUG10K-MT-SM

15.1 to 16.6

3.696 93.88

3.826 97.18

3.595 91.31

10,000 69

8,000 55 __ __ 300

149CBP-46H-

PLUG10K-SM

5-1/2 139.70

15.5 to 23.0

4.670 118.62

4.950 125.73

4.370 111.00

10,000 69

8,000 55

300 149

CBP-55H-FRAC10K-SM

300 149

CBP-55H-PLUG10K-SM

7 177.80

23.0 to 32.0

6.094 154.79

6.366 161.70

5.800 147.32

10,000 69

8,000 55

300 149

CBP-70H-FRAC10K-SM

300 149

CBP-70H-PLUG10K-SM



Weatherford’s FracGuardslim-ODplugsallowgreaterfluidbypassasthey are run in the hole to double or even triple the speed of running a conventional plug. The smaller OD leaves a bypass area around the plugs that is 63 percent greater than that for conventional frac plugs. With this advantage, these plugs can be run on wireline at speeds up to 300 ft (90 m) per minute compared to normal running speeds of conventional composite plugs of about 100 ft (30 m) per minute. In spite of the smaller OD, the plug maintains the conventional pressure rating.

Applications•Multiple-zone fracture stimulation completions in deep wells

Features,AdvantagesandBenefits•ThesmallerODofthisplugsignificantlyreducesthetimerequiredtorun

and set plugs, reducing costs associated with wireline service time and rig time.

FracGuard® Slim-OD Bridge and Frac Plugs



FracGuard® Slim-OD Bridge and Frac Plugs


Size (in./mm)


Minimum ID

(in./mm)

Maximum ID

(in./mm)OD

(in./mm) Series

Pressure RatingTemperature

Rating (°F/°C)

Product Number

Above (psi/MPa)

Below (psi/MPa) Bridge Plug

Top-Ball Frac Plug

Internal-Ball Frac Plug

4-1/2 114.30

15.1 to 18.8

3.754 95.35

3.826 97.18

3.440 87.38

300 10,000 69

8,000 55

300 149

CBP-44- PLUG10K

CBP-44-FRAC10KTB

CBP-44- FRAC10K

350 10,000 69

8,000 55

350 177

CBP-44-PLUG12K-MT —

CBP-44- FRAC10K-MT-

SPECA

400 12,000 82

10,000 69

400 204

CBP-44-PLUG12K-HT — —



Weatherford’s FracGuard surface pipe cementing plug speeds remedial cementing without the use of drillpipe. Rather than using conventional cast-iron cement retainers, which can contaminate the open hole below on drillout, the cementing plug incorporates aflappervalveinthebottomofthe composite plug. The slurry is pumped directly down the surface pipe, and a wiper plug lands on top of the composite plug. This design also eliminates the waiting time for cement to cure when a retrievable packer and drillpipe are used. As a composite plug, the surface pipe cementing plug then can be drilled out in about half the time of a conventional cast-iron cement retainer.

Applications•Remedial cementing operations

on shallow surface casing

Features, Advantages andBenefits•No drillpipe is required for

remedial cementing, reducing the number of steps needed to achieve a remedial cementing squeeze job.

•Composite material reduces the amount of openhole contamination from plug drillout debris, averting debris-associateddifficultiesinsubsequent operations.

•Composite construction is much easier and faster to drill than conventional cast-iron cement retainers, saving valuable rig time.

FracGuard® Surface Pipe Cementing Plug

Plug is set on wireline.

Cement is pumped down casing from surface into

perfs, followed by wiper plug.

Wiper plug bumps on plug. Flapper valve closes and preventsflowback.



FracGuard® Surface Pipe Cementing Plug


Size (in./mm)


Minimum ID

(in./mm)

Maximum ID

(in./mm)OD

(in./mm)

Pressure Rating

Above (psi/MPa)

Below (psi/MPa)

7 177.80 23.0 to 32.0 6.094

154.796.366 161.70

5.800 147.32

10,000 69

10,000 69

9-5/8 244.48 36.0 to 53.5 8.535

216.798.921 226.59

8.375 212.73

8,000 55

8,000 55



Weatherford’s BRS bit-release sub is activated by pump pressure to drop the drill bit from the tubing string after the drillout run. The bit is released when a ball is dropped into the lower sub to create the hydraulic pressure needed to separate from the upper sub.The BRS saves rig time by eliminating the need to pull the drillstring with the bit and run the production string. Only a single trip is needed to clean outandflangeupforproduction.Hundredsofsuccessfuldeploymentshave proven the reliability of the BRS.

Applications•Flanged-up completions•Emergency bit release

Features,AdvantagesandBenefits•The BRS design eliminates work-string rental, reducing drilling costs.•The drill bit is released only after the valve is actuated, preventing

inadvertent release of the bit and another trip.•The torque, tensile, and compression ratings of the BRS exceed those

for the tubing, providing pressure and torsional integrity during drilling.•Thewirelineentryprofileonthebottomofthetubingstringpreventstools

from catching when re-entering the tubing, saving rig time.•Thefishingneckonthelowersubsimplifiesbitretrieval,savingrigtime.•The BRS provides the full tubing ID after disconnection, enabling the maximumflowrate.

Options•Anoptionaldrillpipefloatvalvecanbeconnectedtothelowersubtopreventwellborefluidsfromenteringthetubingstring.

BRS Bit-Release Sub



BRS Bit-Release Sub

SpecificationsStandard Connection1

Maximum OD

(in./mm)

Minimum ID2

(in./mm)

Float Valve Size

Phenolic Ball


Tubing Box Up (in.)

Box Down (in.)

1.90 IJ 10 RD 4THD N-ROD 2.0 50.8

1.5 38.1 1R 0.75

19.05 BRS19

2-3/8 EUE 8 RD2-3/8 API REG 3.25

82.552.10 53.34 1R 1.5

38.1BRS20

2-7/8 API REG BRS21

2-7/8 EUE 8 RD2-3/8 API REG 3.5

88.92.5 63.5 1R 1.5

38.1BRS25

2-7/8 API REG BRS26

3-1/2 EUE 8 RD2-7/8 API REG 4.25

107.952.992 75.997

1R 1.625 41.275

BRS34

3-1/2 API REG 1F-2R BRS351Alternate connections may be available on special order.2After release of the bit



958DB-8 through 2000DB-2 Bridge Plugs

Weatherford’s 958DB-8 through 2000DB-2 bridge plugs are set downhole to isolate lower zones in wellbores for squeeze cementing, fracturing, and abandonment.Each plug is made of premium cast iron and is designed to run on electric line without a tension mandrel. The plug is rated at a 2,000- to 8,000-psi (13,790- to 55,158-kPa) differential pressure from above and below, depending on its size. The standard packing element is rated at 300°F (149°C).

Applications•Squeeze cementing•Fracturing•Temporary and permanent zonal isolation•Well abandonment

Features,AdvantagesandBenefits•One-piece slips eliminate the risk of premature setting when running in

the hole.•The plug runs on existing electric-line setting tools, avoiding the time and

expense of production tubing removal from the wellbore.•Thefield-provendesignenablestheplugtosetsecurelyinP110casing.•Retaining rings help prevent element extrusion, providing a backup for

the packing element so that the plug holds pressure throughout the cycle.•Construction with drillable materials enables the plug to be milled or

drilled out to save the time and expense of retrieval.

Options•Packing elements rated at temperatures above 300°F (149°C)

are available.



958DB-8 through 2000DB-2 Bridge Plugs


OD (in./mm)


Minimum ID

(in./mm)

Maximum ID

(in./mm)

Pressure Rating

(psi/bar)OD

(in./mm)Set force

(lb/kg)Product Number

9-5/8 244.5

29.3 to 58.4 43.6 to 86.9

8.297 210.74

9.083 230.71

8,000 551.58

8.125 206.38

50,000 22,679 958DB8-B

10-3/4 273.1

32.7 to 60.7 48.7 to 90.3

9.525 241.94

10.325 262.26

5,000 344.74

9.440 239.78

50,000 22,679 1075DB5-B

11 3/4 298.5

38.0 to 60.0 56.6 to 89.3

10.641 270.28

11.284 286.61

4,000 275.79

10.437 265.10

50,000 22,679 1175DB4-B

60.0 to 83.0 89.3 to 123.5

10.368 263.35

10.935 277.75

4,000 275.79

9.937 252.40

50,000 22,679 1176DB4-B

13 3/8 339.7

48.0 to 84.5 71.4 to 125.7

12.202 309.93

12.879 327.13

3,000 206.84

11.880 301.75

50,000 22,679 1338DB3-B

16 406.4

65.0 to 118.0 96.7 to 175.6

14.576 370.23

15.444 392.28

2,000 137.90

14.125 358.78

50,000 22,679 1600DB2-B

20 508.0

94.0 to 133.0 139.9 to 197.9

18.537 470.84

19.364 491.85

2,000 137.90

18.375 466.73

50,000 22,679 2000DB2-B



DB-10 Bridge Plug

Weatherford’s DB-10 bridge plugs are premium cast-iron plugs that can be used in various applications. Designed to run on electric line, these plugs can withstand differential pressures up to 10,000 psi (68.95 MPa) and temperaturesupto300˚F(149˚C)fromaboveandbelowtheplug.

Applications•Well abandonment•Temporary and permanent zonal isolation•Squeeze cementing•Fracturing

Features,AdvantagesandBenefits•These bridge plugs are constructed of drillable material that ensures

quick drillouts—saving time and costs.•The standard packing element is rated at 300°F (149°C) for high-

temperature reliability. A higher-temperature packing element is available upon request for extreme temperature environments.

•Top-set with shear stud ensures that the required force is generated to fullysetthepackerandpackofftheelement,providingamoreefficientoperation.

•Retaining rings help prevent element extrusion and minimize misruns—saving time and costs.

•Plugs can be run on existing electric line, which eases operations—saving time and reducing the risk of improper setting.



DB-10 Bridge Plug

Casing Plug

Size (in./mm)


Minimum ID (in./mm)

Maximum ID (in./mm)

Pressure Rating (psi/bar)

OD (in./mm)

Set Force (lbf/N)

Product Number for Baker-Style Setting

2-3/8 60.33

4.00 to 5.80 5.95 to 8.63

1.780 45.21

2.074 52.68

10,000 689.48

1.750 44.45

9,000* 40,034

00175237 (238DB10-B)

2-7/8 73.03

6.40 to 6.50 9.52 to 9.67

2.340 59.44

2.525 64.14

10,000 689.48

2.220 56.39

9,000* 40,034

00172073 (278DB10-B)

3-1/2 88.90

5.75 to 10.30 8.55 to 15.33

2.867 72.82

3.258 82.75

10,000 689.48

2.750 69.85

9,000* 40,034

00172186 (350DB10-B)

4 101.60

5.60 to 14.00 8.33 to 20.83

3.340 84.84

3.732 94.79

10,000 689.48

3.140 79.76

20,000 85,964

00172153 (400DB10-B)

4-1/2 114.30

9.50 to 15.10 14.14 to 22.47

3.826 97.18

4.090 103.89

10,000 689.48

3.562 90.48

33,000 146,791

00175013 (450DB10-B)

5 127.00

11.50 to 20.80 17.11 to 30.95

4.154 105.51

4.560 115.82

10,000 689.48

3.937 100.00

33,000 146,791

00172546 (500DB10-B)

5-1/2 139.70

13.00 to 23.00 19.34 to 34.22

4.580 116.33

5.044 128.12

10,000 689.48

4.312 109.53

33,000 146,791

00174656 (550DB10-B)

5-3/4 146.05

14.00 to 25.20 20.83 to 37.50

4.890 124.21

5.290 134.37

10,000 689.48

4.699 119.36

33,000 146,791

00230063 (575DB10-B)

6-5/8 168.28

17.00 to 32.00 25.29 to 47.62

5.595 142.11

6.135 155.83

10,000 689.48

5.375 136.53

50,000 222,411

00173190 (658DB10-B)

7 177.80

17.00 to 35.00 25.29 to 52.08

6.000 152.40

6.538 166.07

10,000 689.48

5.687 144.45

50,000 222,411

00173135 (700DB10-B)

17.00 to 29.00 25.29 to 52.08

6.088 154.64

6.629 168.38

10,000 689.48

5.900 149.86

50,000 222,411

00741114 (700DB10LW-B)

7-5/8 193.68

20.00 to 39.00 29.76 to 58.03

6.625 168.28

7.125 180.98

10,000 689.48

6.312 160.32

50,000 222,411

00173586 (758DB10-B)

8-5/8 219.08

24.00 to 49.00 35.71 to 72.91

7.310 185.67

8.097 205.66

10,000 689.48

7.144 181.46

50,000 222,411

00173358 (858DB10-B)

9-5/8 244.48

29.30 to 58.40 43.60 to 86.90

8.297 210.74

9.083 230.71

8,000 551.58

8.125 206.38

50,000 222,411

00174321 958DB8-B

10-3/4 273.05

32.70 to 60.70 48.66 to 90.32

9.525 241.94

10.325 262.26

5,000 344.74

9.440 239.78

50,000 222,411

00175375 1075DB5-B

11-3/4 298.45

38.00 to 60.00 56.54 to 89.28

10.641 270.28

11.284 286.61

4,000 275.79

10.437 265.10

50,000 222,411

00175647 1175DB4-B

60.00 to 83.00 89.28 to 123.50

10.368 263.35

10.935 277.75

4,000 275.79

9.937 252.40

50,000 222,411

00761311 1176DB4-B

13-3/8 339.73

48.00 to 84.5 71.42 to 125.74

12.202 309.93

12.879 327.13

3,000 206.84

11.880 301.75

50,000 222,411

00175239 1338DB3-B

16 406.40

65.00 to 118.00 96.72 to 175.58

14.576 370.23

15.444 392.28

2,000 137.90

14.125 358.78

50,000 222,411

00291149 1600DB2-B

20 508.00

94.00 to 133.00 139.87 to 197.90

18.537 470.84

19.364 491.85

2,000 137.90

18.375 466.73

50,000 222,411

00175203 2000DB2-B

* Set force for GO/Owens is 12,000 lbf (53,379 N).

Specifications



Weatherford’s HBP hydro-mechanical bridge plug is a drillable, high-pressure plug run on tubing or drillpipe to isolate the lower part of a wellbore. Hydraulic pressure and tubing tension set the plug. A built-in hydraulic setting tool in the top of the plug sets the top slips. Tubing tension combined with the pressure is applied to complete the setting. Then the tool automatically shears off for retrieval from the well. Alternatively, right rotation can release the tubing.

Applications•Deviated and horizontal wells•Temporary and permanent plugging•Abandonment

Features,AdvantagesandBenefits• The compact design enables use in deviated wells.• The full-circle slips provide a large contact area to minimize

casing damage.• The expanding full-circle rings support the plug to prevent

element extrusion.• The shear or rotational release provides options for releasing the plug

after deployment.• Construction with drillable materials enables the plug to be milled or

drilled out to save the time and expense of retrieval.

HBP Hydro-Mechanical Bridge Plug



HBP Hydro-Mechanical Bridge Plug


OD (in./mm)


ID (in./mm) Maximum

OD (in./mm)

Product NumberMinimum Maximum

4-1/2 114.3

9.5 to 15.1 14.1 to 22.5

3.826 97.18

4.090 103.89

3.593 91.26 43HBP.1001

5-1/2 139.7

13.0 to 23.0 19.3 to 34.2

4.670 118.62

5.044 128.12

4.312 109.52 45HBP.1001

7 177.8

17.0 to 38.0 25.3 to 56.6

5.920 150.37

6.538 166.07

5.688 144.49 47HBP.1003

7-5/8 193.7

20.0 to 39.0 29.8 to 58.0

6.625 168.28

7.125 180.98

6.312 160.32 48HBP.1001

9-5/8 244.5

29.3 to 61.1 43.6 to 90.9

8.375 212.73

9.063 230.20

8.125 206.38 51HBP.1001

10-3/4 273.1

32.8 to 60.7 48.8 to 90.3

9.660 245.36

10.192 258.88

9.437 239.70 53HBP.1001

13-3/8 339.7

48.0 to 72.0 71.4 to 107.1

12.347 313.61

12.715 322.96

12.000 304.80 55HBP.1002

20 508.0

94.0 to 175.0 139.9 to 260.4

18.314 465.18

19.124 485.75

18.000 457.20 59HBP.1001



Weatherford’s HM-1 bridge plug is a permanent cast-iron plug set with hydraulic pressure and mechanical pull to isolate the lower part of a wellbore. The plug uses a setting tool. Changing the setting sleeve enables one tool to be used for 4 1/2- through 5 1/2-in. (114.3- through 139.7-mm) casing. Right rotation of the tool releases the plug.

Applications•Squeeze cementing•Fracturing•Temporary and permanent zonal isolation•Well abandonment

Features,AdvantagesandBenefits•The compact design enables use in deviated wells.• One-piece slips eliminate the risk of premature setting when running in thehole,avoidingthedifficultyandexpenseofplugretrieval and resetting.

• Hydraulic pressure combined with mechanical pull to set the plug ensures that the setting tool releases and prevents downhole tool loss.

• The right rotation of the setting tool to release the plug differs from the left rotation to set it, preventing inadvertent, costly errors.

• Construction with drillable materials enables the plug to be milled or drilled out to save the time and expense of retrieval.

Options•High- and medium-pressure plugs are available in most sizes.

HM-1 Bridge Plug

Setting Tool



HM-1 Bridge Plug


Maximum Plug OD (in./mm)

Surface Pressure (psi/kPa)

Tension Force Required (lbf/N) Product

NumberSize

(in./mm)Weight

(lb/ft, kg/m)

Recommended Range (in./mm)

Minimum Maximum Minimum Maximum

4-1/2 114.3

9.5 to 15.1 14.1 to 22.5

3.826 97.18

4.090 103.89

3.562 90.47

1,500 10,342

28,000 124,550

30,000 133,447 450HM1B-10

5 127.0

11.5 to 20.8 17.1 to 31.0

4.154 105.51

4.560 115.82

3.937 100.00

1,500 10,342

28,000 124,550

30,000 133,447 500HM1B-10

5-1/2 139.7

13.0 to 23.0 19.3 to 34.2

4.580 116.33

5.044 128.12

4.312 109.52

1,500 10,342

28,000 124,550

30,000 133,447 550HM1B-10

7 177.8

17.0 to 35.0 25.3 to 52.1

6.000 152.40

6.538 166.07

5.687 144.45

1,500 10,342

45,000 200,170

50,000 222,411 700HM1B-10

7-5/8 193.7

20.0 to 39.0 29.8 to 58.0

6.625 168.28

7.125 180.98

6.312 160.32

1,500 10,342

45,000 200,170

50,000 222,411 758HM1-10

8-5/8 219.1

24.0 to 49.0 35.7 to 72.9

7.310 185.67

8.097 205.66

7.125 180.98

1,500 10,342

45,000 200,170

50,000 222,411 858HM1-10

9-5/8 244.5

29.3 to 58.4 43.6 to 86.9

8.435 214.25

9.063 230.20

8.175 207.65

1,500 10,342

45,000 200,170

50,000 222,411 958HM1-8

10-3/4 273.1

32.7 to 60.7 48.7 to 90.3

9.660 245.36

10.192 258.88

9.437 239.70

1,500 10,342

45,000 200,170

50,000 222,411 1075HM1-5

11-3/4 298.5

38.0 to 60.0 56.6 to 89.3

10.772 273.61

11.150 283.21

10.437 265.10 1,500

10,34245,000 200,170

50,000 222,411

1175HM1-5

60.0 to 83.0 89.3 to 123.5

10.192 258.88

10.772 273.61

9.937 252.40 1176HM1-5

13-3/8 339.7

48.0 to 85.0 71.4 to 126.5

12.159 308.84

12.175 309.25

11.880 301.75

1,500 10,342

45,000 200,170

50,000 222,411 1338HM1-3

16 406.4

65.0 to 118.0 96.7 to 175.6

14.576 370.23

15.250 387.35

14.125 358.78

2,000 13,790

45,000 200,170

50,000 222,411 1600HM1-2

20 508.0

94.0 to 133.0 139.9 to 197.9

18.730 475.74

19.124 485.75

18.375 466.73

2,000 13,790

45,000 200,170

50,000 222,411 2000HM1-2



Weatherford’s HM-2 bridge plug is a permanent high-pressure cast-iron plug set with hydraulic pressure and mechanical pull to isolate the lower partofawellbore.Theplugusesanefficientbuilt-insettingtool.Rightrotation of the tool releases the plug.The standard packing element is rated at 300°F (149°C).

Applications•High-pressure environments•Deviated wellbores•Squeeze cementing•Fracturing•Temporary and permanent zonal isolation•Well abandonment

Features,AdvantagesandBenefits• Thefield-provencompactdesignenablesuseindeviatedwells.• One-piece slips eliminate the risk of premature setting when running inthehole,avoidingthedifficultyandexpenseofplugretrievalandresetting.

• Hydraulic pressure combined with mechanical pull to set the plug ensures that the setting tool releases and prevents downhole tool loss.

• The right rotation of the setting tool to release the plug differs from the left rotation to set it, preventing inadvertent, costly errors.

• Construction with drillable materials enables the plug to be milled or drilled out to save the time and expense of retrieval.

Options•Packing elements rated at temperatures above 300°F (149°C)

are available.

HM-2 Bridge Plug



HM-2 Bridge Plug


Maximum Plug OD (in./mm)

Tension Force Required1 (lbf/N)

Product Number

Size (in./mm)


Range (in./mm)

Minimum MaximumMinimum Maximum3-1/2 88.9

5.75 to 10.30 8.56 to 15.33

2.867 72.82

3.258 82.75

2.750 69.85

10,000 44,482

13,000 57,827 350HM2-10

4 101.6

5.60 to 14.00 8.33 to 20.83

3.340 84.84

3.732 94.79

3.190 81.03

17,000 75,620

20,000 88,964 400HM2-10

4-1/2 114.3

9.50 to 15.10 14.14 to 22.47

3.826 97.18

4.090 103.89

3.562 90.47

28,000 124,550

30,000 133,447 450HM2-10

5 127.0

11.50 to 20.80 17.11 to 30.95

4.154 105.51

4.560 115.82

3.937 100.00

28,000 124,550

30,000 133,447 500HM2-10

5-1/2 139.7

13.00 to 23.00 19.35 to 34.23

4.580 116.33

5.044 128.12

4.312 109.52

28,000 124,550

30,000 133,447 550HM2-10

5-3/4 146.1

14.00 to 25.20 20.83 to 37.50

4.890 124.21

5.290 134.37

4.699 119.35

30,000 133,447

33,000 146,791 575HM2-10

6-5/8 168.3

17.00 to 32.00 25.30 to 47.62

5.595 142.11

6.135 155.83

5.375 136.53

45,000 200,170

50,000 222,411 658HM2-10

7 177.8

17.00 to 35.00 25.30 to 52.09

6.000 152.40

6.538 166.07

5.687 144.45

45,000 200,170

50,000 222,411 700HM2-10

7-5/8 193.7

20.00 to 39.00 29.76 to 58.04

6.625 168.28

7.125 180.98

6.312 160.32

45,000 200,170

50,000 222,411 758HM2-10

8-5/8 219.1

24.00 to 49.00 35.72 to 72.92

7.310 185.67

8.097 205.66

7.125 180.98

45,000 200,170

50,000 222,411 858HM2-10

9-5/8 244.5

29.30 to 58.40 43.60 to 86.91

8.435 214.25

9.063 230.20

8.175 206.38

45,000 200,170

50,000 222,411 958HM2-8

10-3/4 273.1

32.70 to 60.70 48.66 to 90.33

9.660 245.36

10.192 258.88

9.437 239.70

45,000 200,170

50,000 222,411 1075HM2-5

11-3/4 298.5

38.00 to 60.00 56.55 to 89.29

10.772 273.61

11.150 283.21

10.437 265.10

45,000 200,170

50,000 222,411 1175HM2-4

13-3/8 339.7

48.00 to 84.50 71.43 to 125.75

12.175 309.25

11.880 301.75

45,000 200,170

50,000 222,411 1338HM2-3



Weatherford’sPCRcementretainerisafield-proven,modular,cast-iron,drillable isolation tool for various applications. Changing the top slips enables the versatile retainer to be set mechanically or on a wireline setting tool. Replacing the sleeve valve with a solid plug converts the retainer to a PBP bridge plug.The retainer is rated up to 400°F (204°C) and has a differential pressure rating up to 10,000 psi (68,948 kPa).

Applications•Cementing•Stimulation•Temporary and permanent zonal isolation•Well abandonment

Features,AdvantagesandBenefits•Changing the top slips easily converts the retainer to a mechanical or

wireline setting, providing deployment versatility.•The retainer enables pressure testing before cement squeezing to

ensure tubing integrity.•The modular design eases conversion to a bridge plug,

reducing inventory.•The simple, surface-controlled valve automatically closes when the

stinger is removed to maintain the squeeze pressure while excess cement is circulated out.

•The valve isolates hydrostatic pressure to protect sensitive zones in low-fluid-levelwells.

•The rotationally locked, cast-iron components enable a fast drillout to save rig time.

PCR Cement Retainer



PCR Cement Retainer

SpecificationsCasing Retainer

OD (in./mm)


ID (in./mm) Maximum

OD (in./mm)

Product Number

Minimum Maximum Wireline Set Mechanical Set

4-1/2 114.3

9.50 to 15.10 14.14 to 22.47

3.826 97.18

4.090 103.89

3.593 91.26 43PCR.1002 43PCR.1001

5 127.0

11.50 to 18.00 17.11 to 26.79

4.276 108.61

4.560 115.82

3.937 100.00 44PCR.1002 44PCR.1001

5-1/2 139.7

13.00 to 23.00 19.35 to 34.23

4.670 118.62

5.118 130.00

4.312 109.52 45PCR.1002 45PCR.1001

5-3/4 146.1

14.00 to 25.20 20.83 to 37.50

4.890 124.21

5.290 134.37

4.700 119.38 575CR-WL-80 575CR-MS-80

6-5/8 168.3

17.00 to 34.50 25.30 to 51.34

5.575 141.61

6.135 155.83

5.375 136.53 46PCR.1002 46PCR.1001

7 177.8

17.00 to 35.00 25.30 to 52.09

6.004 152.50

6.538 166.07

5.688 144.48 47PCR.1002 47PCR.1001

7-5/8 193.7

20.00 to 39.00 29.76 to 58.04

6.625 168.28

7.125 180.98

6.312 160.32 48PCR.1002 48PCR.1001

8-5/8 219.1

24.00 to 49.00 35.72 to 72.92

7.511 190.78

8.097 205.66

7.125 180.98 49PCR.1002 49PCR.1001

9-5/8 244.5

29.30 to 61.10 43.60 to 90.93

8.375 212.73

9.063 230.20

8.125 206.38 51PCR.1002 51PCR.1001

10-3/4 273.1

32.75 to 60.70 48.74 to 90.33

9.660 245.36

10.192 258.88

9.440 239.78 53PCR.1002 53PCR.1001

11-3/4 298.5

60.00 to 83.00 89.29 to 123.52

10.192 258.88

10.772 273.61

9.937 252.40 1176CR-WL 1176CR-MS

38.00 to 60.00 56.55 to 89.29

10.772 273.61

11.150 283.21

10.440 265.18 54PCR.1002 54PCR.1001

13-3/8 339.7

48.00 to 72.00 71.43 to 107.15

12.347 313.61

12.715 322.96

12.000 304.80 55PCR.1002 55PCR.1001

16 406.4

65.00 to 128.00 96.73 to 190.48

14.438 366.73

15.250 387.35

14.125 358.78 57PCR.1002 57PCR.1001

18 457.2

70.58 to 87.50 105.03 to 130.21

17.088 434.04

17.250 438.15

16.650 422.91 1800CR-WL —

18-5/8 473.1

87.50 130.21

17.480 443.99

18.000 457.20

17.125 434.98 1858CR-WL —

20 508.0

94.00 to 133.00 139.89 to 197.93

18.330 465.58

19.124 485.75

18.375 466.73 2000CR-WL —

30 762.0

157.73 to 310.00 234.73 to 461.33

28.000 711.20

29.000 736.60

27.500 698.50 3000CR-WL1 —

1Set only with Weatherford’s HST hydraulic setting tool



Weatherford’s 238CR-400CR cement retainer is a cast-iron, drillable isolation tool that holds pressure from below for cementing in tubing sizes from 2 3/8- to 4-in. (60.3- to 101.6-mm) OD.

The retainer is rated at 10,000 psi (68,948 kPa) and 300°F (149°C).

Applications•Cementing•Well abandonment

Features,AdvantagesandBenefits•The modular design eases conversion to a bridge plug and from

mechanical to wireline setting, reducing inventory.•Thefield-provendesignenablestheretainertosetsecurelyin

P110 casing.•The simple, spring-loaded valve holds differential pressure from below for

effective backpressure control.•The valve isolates hydrostatic pressure to protect sensitive zones in low-fluid-levelwells.

•Retaining rings help to prevent element extrusion and maintain seal integrity.

•The rotationally locked, cast-iron components enable a fast drillout to save rig time.

238CR-400CR Cement Retainer



238CR-400CR Cement Retainer

SpecificationsRetainer

Tubing Retainer

OD (in./mm)


ID (in./mm) Maximum

OD (in./mm)

Set Force Required

(lbf/N)Product NumberMinimum Maximum

2.375 60.33

4.00 to 5.80 5.95 to 8.63

1.780 45.21

2.074 52.68

1.760 44.70

9,000 40,034 238CR-WL

2.875 73.03

6.40 to 6.50 9.52 to 9.67

2.340 59.44

2.525 64.14

2.225 56.52

9,000 40,034 278CR-WL

3.500 88.90

5.75 to 10.30 8.56 to 15.33

2.815 71.50

3.223 81.86

2.750 69.85

9,000 40,034 350CR-WL

4.000 101.60

5.60 to 14.00 8.33 to 20.83

3.340 84.84

3.732 94.79

3.140 79.76

20,000 88,964 400CR-WL

Seal StingerRetainer Stinger

ProductID

(in./mm)

Connection OD1

(in./mm)

Stinger OD

(in./mm)

Stinger ID


238CR-WL 0.718 18.24

1.750 44.45

0.714 18.14

0.370 9.40 238CR-38

278CR-WL 0.812 20.62

2.220 56.39

0.809 20.55

0.490 12.45 278CR-38

350CR-WL 0.812 20.62

2.220 56.39

0.809 20.55

0.490 12.45 278CR-38

400CR-WL 0.812 20.62

2.220 56.39

0.809 20.55

0.490 12.45 278CR-38

1The thread is 1.050-in. EU 10 RD


Retrievable Service Packers

Weatherford’s HD compression-set retrievable service packer isolates the annulus from the production conduit for general service. The packer can be run with a mechanically set bridge plug to straddle intervals.

The internal bypass provides circulation around the packer and faster trips with less swabbing. Hydraulically operated upper hold-down buttons anchor the packer against high differential pressure from below. Backup rings on all O-rings provide reliable sealing at high temperatures and pressures. An internal unloader enables circulation below the buttons, easing packer retrieval.

Applications•General service•Squeeze cementing•Testing and treating•Cased-hole production testing

Features,AdvantagesandBenefits•The carbide slip and buttons improve durability and enable setting in

high-grade casing.•A one-quarter turn sets the packer, and a pickup unsets it, simplifying

operation on the rig.•The large-diameter hold-down buttons help protect against

casing damage.•The heavy-duty mandrel supports high hang-off weights, and its full bore

enables the easy passage of wireline tools and maximum pump rates.

Options•The packer is available with a left-turn set, automatic release jay and

other elastomers for hostile environments.

HD Compression-Set Retrievable Service Packer



HD Compression-Set Retrievable Service Packer

SpecificationsCasing Packer1

OD (in./mm)


ID (in./mm) Maximum

OD (in./mm)

Minimum ID

(in./mm)

Standard Thread Connection

(in.)Product NumberMinimum Maximum

4 101.6

9.5 to 11.0 14.1 to 16.4

3.476 88.29

3.548 90.12

3.318 84.28

1.485 37.72 1.900 EU2 10 RD3 613-40-0C0

4-1/2 114.3

9.5 to 13.5 14.1 to 20.1

3.920 99.57

4.090 103.89

3.755 95.38

1.485 37.72 2-3/8 EU 8 RD 613-45-0C0

5 127.0

11.5 to 15.0 17.1 to 22.3

4.408 111.96

4.560 115.82

4.130 104.90

1.860 47.24 2-3/8 EU 8 RD 613-50-0C0

5-1/2 139.7

14.0 to 17.0 20.8 to 25.3

4.892 124.26

5.012 101.90

4.630 117.60 1.923

48.84 2-3/8 EU 8 RD

613-55-0C0

20.0 to 23.0 29.8 to 34.2

4.670 118.62

4.778 121.36

4.505 114.43 613-57-0C0

6-5/8 168.3

28.0 to 35.0 41.7 to 52.1

5.595 142.11

5.791 147.09

5.380 136.65

2.485 63.12 2-7/8 EU 8 RD 613-67-0C0

7 177.8

17.0 to 26.0 25.3 to 38.7

6.276 159.41

6.538 166.07

6.125 155.58 2.485

63.12 2-7/8 EU 8 RD

613-72-0C0

26.0 to 32.0 38.7 to 47.6

6.094 154.79

6.276 159.41

5.880 149.35 613-70-0C0

7-5/8 193.7

24.0 to 29.7 35.7 to 44.2

6.875 174.63

7.025 178.44

6.693 170.00 2.485

63.12 2-7/8 EU 8 RD

613-76-0C0

33.7 to 39.0 50.2 to 58.0

6.625 168.28

6.765 171.83

6.458 164.03 613-75-0C0

9-5/8 244.5

43.5 to 53.5 64.7 to 79.6

8.535 216.79

8.755 222.38

8.255 209.68

3.985 101.22 4-1/2 EU 8 RD 613-95-0C0

1The standard packer has carbide slips, a right-turn set automatic release jay, and 90-70-90 nitrile elastomers.2External upset3Round



Weatherford’sHDLcompression-setservicepackerisamodifiedversionofWeatherford’s longstanding HD service packer. The HDL packer’s setting stroke is longer to provide easier opening of the unloader valve when setting the packer. By preventing disturbance of the lower slip and drag block assembly, this feature helps to eliminate the risk of unsetting the packer.TheHDLpackerwasspecificallydesignedfortotalcorepenetration(TCP) and drillstem testing applications which often require setting the packer,followedbyopeningtheunloadervalvetocirculatefluids.The HDL packer sets with a quarter-turn rotation and slack-off weight. Standard drag blocks, lower slips, and holddown buttons are equipped with carbide inserts for extra gripping ability. The hydraulically operated holddown buttons anchor the packer during operations, creating high-pressure differential from below the packer. The packer has an integral, internal unloader valve that allows for equalization of pressure or for circulation below the packer before the tool is unset. The unloader valve also enables circulation around the holddown body, making it possible to remove debris which would otherwise interfere with retrieval. The capability to bypass through the valve and packer allows for faster trip times with less swabbing.The HDL packer is also well-suited to function as a TCP “shoot and pull” or drillstem test packer. Its long stroke allows for opening the unloader without unsetting the packer. All internal threads on the mandrel are high-strength, stub-acme threads. Interchangeable end subs are available to easily switch from tubing to drillpipe threads.

Applications•TCP operations•Drillstem testing•Casing production testing•Squeeze cementing

Features,AdvantagesandBenefits•A one-quarter turn sets the packer, and a pickup unsets it, decreasing trip

time while providing operational time and cost savings.

•The automatic jay mechanism is standard, simplifying operations and reducing rig time.

•The HDL packer’s heavy-duty mandrel supports high-tensile loads, enabling heavy strings to hang from the packer.

•Thepacker’sfield-provencarbideslips,buttons,anddragblocksarestandard and provide long service life.

HDL Compression-Set Retrievable Packer



HDL Compression-Set Retrievable Packer

•The interchangeable end subs allow easy thread changing, enabling quick changes between tubing and drillpipe.

•The pressure-balanced mandrel holddown counteracts pressure from below, permitting circulation without unsetting the packer.

•This packer’s high-integrity seals reduce leak occurrence, minimizing the need to redress the tool.

• Its long setting stroke facilitates circulation and equalization through the unloader valve without unsetting the packer.

SpecificationsCasing Packer

OD (in./mm)


Minimum ID

(in./mm)

Maximum ID

(in./mm)

Maximum OD

(in./mm)

Minimum ID

(in./mm)

Thread Connection Box × Pin

Product Number

5 127.00

11.5 to 18.0 17.1 to 26.8

4.276 108.61

4.560 115.82

4.130 104.90

1.610 40.89

2-3/8 in. EU1 8 RD2

1154607

18.0 to 21.0 26.8 to 31.3

4.154 105.51

4.276 108.61

3.974 100.94

1.610 40.89 1147202

5-1/2 139.70

14.0 to 17.0 20.8 to 25.3

4.892 124.26

5.012 127.30

4.641 117.88

1.700 43.18 1159251

20.0 to 23.0 29.8 to 34.2

4.670 118.62

4.778 121.36

4.516 114.71

1.700 43.18 1157757

6-5/8 168.28

24.0 to 32.0 35.7 to 47.6

5.675 144.15

5.921 150.39

5.505 139.83

2.370 60.20

2-7/8 in. EU 8 RD

1166010

7 177.80

17.0 to 26.0 25.3 to 38.7

6.276 159.41

6.538 166.07

6.099 154.91

2.370 60.20

1169954

26.0 to 32.0 38.7 to 47.6

6.094 154.79

6.276 159.41

5.891 149.63 1170731

29.0 to 35.0 43.2 to 52.1

6.004 152.50

6.184 157.07

5.828 148.03 1171945

7-5/8 193.68

24.0 to 29.7 35.7 to 44.2

6.875 174.63

7.025 178.44

6.693 170.00 2.370

60.20

1180772

33.7 to 39.0 50.2 to 58.0

6.625 168.28

6.765 171.83

6.458 164.03 1181252

9-5/8 244.48

43.5 to 53.5 64.7 to 79.6

8.535 216.79

8.755 222.38

8.281 210.34

3.475 88.27

4-1/2 in. EU 8 RD 1192310




Weatherford’s DLT compression-set service packer isolates the annulus from the production conduit in high-pressure, high-temperature applications.The packer has tool-joint connections on long top and bottom subs for hydraulic tong makeup and breakout. Hydraulically operated upper hold-down buttons anchor the packer against high differential pressure from below. Backup rings on all O-rings provide reliable sealing at high temperatures and pressures. All internal end connections have positive rotational locks, enabling the packer to transmit high torque.

Applications•High-pressure and -temperature testing and treating•Drillstem and production testing•Storm packer applications

Features,AdvantagesandBenefits•The packer has a high-torque rating for manipulating heavy drillpipe into

tight spots.•The standard tool-joint connections on the top and bottom subs enable

hydraulic tong makeup and breakout to save rig time.•The carbide slip and buttons improve durability and enable setting in

high-grade casing.•A one-quarter turn sets the packer, and a pickup unsets it, simplifying

operation on the rig.•The large-diameter hold-down buttons help protect against casing damage.•The heavy-duty mandrel supports high hang-off weights.•The standard automatic jay mechanism enables the packer to be unset

with a straight pickup so that it can be retrieved or moved and reset.

DLT Compression-Set Service Packer



DLT Compression-Set Service Packer


Size (in./mm)


ID (in./mm)

Maximum OD (in./mm)

Minimum ID (in./mm)

Box-and-Pin Thread Connection


4.500 101.60

11.6 to 13.5 17.3 to 20.1

3.920 99.57

4.000 101.60

3.781 96.04 1.750

44.45 2-3/8 IF1

688-45

15.1 to 17.7 22.5 to 26.3

3.696 93.88

3.826 97.18

3.593 91.26 688-46-000

5.000 127.00

11.5 to 15.0 17.1 to 22.3

4.408 111.96

4.560 115.82

4.250 107.95 1.750

44.45 2-3/8 IF

688-50-000

15.0 to 18.0 22.3 to 26.8

4.276 108.61

4.408 111.96

4.125 104.78 688-51-000

5.500 139.70

13.0 to 17.0 19.3 to 25.3

4.892 124.26

5.044 128.12

4.641 117.88 1.750

44.45 2-3/8 IF

688-55-000

17.0 to 23.0 25.3 to 34.2

4.670 118.62

4.892 124.26

4.500 101.60 688-55B-000

7.000 177.80

17.0 to 23.0 25.3 to 34.2

6.366 161.70

6.538 166.07

6.188 157.18

2.688 68.28

3-1/2 IF

688-73A-000

26.0 to 32.0 38.7 to 47.6

6.094 154.79

6.276 159.41

5.954 151.23

2.656 67.46

688-73B-000

32.0 to 38.0 47.6 to 56.6

5.920 150.37

6.094 154.79

5.781 146.84 688-73C-001

38.0 to 46.4 56.6 to 69.1

5.626 142.90

5.920 150.37

5.525 140.34 688-73D-000

7.625 193.68

24.0 to 29.7 35.7 to 44.2

6.875 174.63

7.025 178.44

6.680 169.67

2.656 67.46

3-1/2 IF

688-75A-000

33.7 to 39.0 50.2 to 58.0

6.625 168.28

6.765 171.83

6.453 163.91

2.688 68.28 688-75B

9.625 244.48

32.3 to 43.5 48.1 to 64.7

8.755 222.38

9.001 228.63

8.584 218.03

3.750 95.25 4-1/2 IF

688-96-001

43.5 to 53.5 64.7 to 79.6

8.535 216.79

8.755 222.38

8.365 212.47 688-95-001

58.4 to 59.4 86.9 to 88.4

8.407 213.54

8.435 214.25

8.250 209.55 688-94-000

10.750 273.05

51.0 to 55.5 75.9 to 82.6

9.760 247.90

9.850 250.19

9.500 241.30 3.735

94.87 4-1/2 IF

688-10A-000

71.1 to 73.2 105.8 to 108.9

9.406 238.91

9.450 240.03

9.125 231.78 688-10C-000

11.750 298.45

60.0 to 71.0 89.3 to 105.7

10.586 268.88

10.772 273.61

10.406 264.31

3.735 94.87 4-1/2 IF 688-11B-000

13.375 339.73

48.0 to 77.0 71.4 to 114.6

12.275 311.79

12.715 322.96

12.000 304.80

3.690 93.73 4-1/2 IF 688-13-000

1Internalflush



Weatherford’s CSTH storm packer is a heavy-duty, retrievable packer set by compression that holds differential pressure from above and below and isolates the wellbore during suspended drilling. Run with a back check-valve system, the packer secures the well during wellhead repair or a weather emergency. The packer can also be used for conventional service, such as acidizing, fracturing, squeeze cementing, and casing testing.A three-quarter turn sets the packer, and a straight pull releases it. The heavy-walled mandrel with tool-joint connections enables the packer to be set shallowly with the drillstring weight suspended below.

Applications•Cased-hole drillstem and production tests•Squeeze cementing and treatment•Wellhead repair•Weather emergencies

Features,AdvantagesandBenefits•The tool-joint connections on the mandrel make up directly to the drillpipe

without crossover subs, saving rig time and inventory.•The heavy-duty mandrel supports high hang-off weights.•The high tail-pipe rating enables long drillstring deployment.•The standard carbide buttons on the caged slips and holddown improve

durability and enable setting in high-grade casing.•The three-quarter turn to set and straight pull to release provide simple operation,evenonfloatingrigs.

•The hydraulic hold-down pistons help to secure the packer in place, preventing pressure differential from unsetting it.

•The keyed upper and lower connections enable the packer to transmit high torque without overloading them.

•Thelarge,built-inbypassenablesequalizationandhighfluid-circulationrates for debris removal.

•The packer has few parts to take apart, making it easy and inexpensive to redress.

Options•Thepackerisavailableinaright-orleft-setconfiguration.

CSTH Storm Packer



CSTH Storm Packer


Size (in./mm)


ID (in./mm) Maximum

OD (in./mm)

Box-and-Pin Thread Connection


4-1/2 114.3

9.50 to 13.50 14.14 to 20.09

3.920 99.57

4.090 103.89

3.771 95.78 2-3/8 IF1 43CSTH.1002

5 127.0

15.00 to 18.00 22.32 to 26.79

4.276 108.61

4.408 111.96

4.125 104.78 2-3/8 IF 43CSTH.1001

9-5/8 244.5

29.30 to 36.00 43.60 to 53.57

8.921 226.59

9.063 230.20

8.593 218.26

4-1/2 IF

51CSTH.1003

40.00 to 47.00 59.53 to 69.94

8.681 220.50

8.835 224.41

8.437 214.30 51CSTH.1002

47.00 to 53.50 69.94 to 79.62

8.535 216.79

8.681 220.50

8.218 208.74 51CSTH.1001

10-3/4 273.1

32.75 to 51.00 48.74 to 75.90

9.850 250.19

10.192 258.88

9.630 244.60

4-1/2 IF

53CSTH.1003

55.50 to 60.70 82.59 to 90.33

9.660 245.36

9.760 247.90

9.380 238.25 53CSTH.1002

11-3/4 298.5

38.00 to 73.60 56.55 to 109.53

10.532 267.51

11.150 283.21

10.255 260.48 4-1/2 IF 54CSTH.1001

13-3/8 339.7

48.00 to 72.00 71.43 to 107.15

12.347 315.90

12.715 322.96

12.125 307.98

4-1/2 IF

55CSTH.1002

77.00 to 102.00 114.59 to 151.79

11.899 302.23

12.275 311.79

11.625 295.28 55CSTH.1001

16 406.4

52.50 to 84.00 78.13 to 125.01

15.010 381.25

15.396 391.06

14.760 374.90

4-1/2 IF

57CSTH.1002

109.00 to 128.00 162.21 to 190.48

14.438 366.73

14.688 373.08

14.187 360.35 57CSTH.1001

1Internalflush



Weatherford’s 32-A tension-set packer is a versatile, easy-to-use service tool for isolating the annulus from the production conduit in shallow applications. Field-proven for more than 40 years, the rugged design makes it the preferred packer set by tension in the industry.The packer is designed to be run, set, reset, and retrieved easily, even under adverse conditions. The packer is run with Weatherford’s SC tension unloadervalve,whichenableswell-fluidcirculationthroughandaroundthe packer during run-in. The valve also enables the equalization of tubing and annulus differential pressure for packer retrieval. The packer can also be run with Weatherford’s TS bridge plug for testing and remediation. The packer has built-in safety features that enable retrieval if debris prevents normal retrieval.

Applications•General service•Shallow testing and treating•Squeeze cementing•Cased-hole production testing

Features,AdvantagesandBenefits•Thefield-proven,ruggeddesignensuresreliableoperation.•Thefullopeningenablesmaximumwell-fluidcirculationthroughthetool

during run-in.•Bi-directional slips anchor the packer securely to the casing to hold

differential pressure from above and below.•The packer is set and released by a simple one-third turn of the tool,

providing easy operation.•The internal safety-joint release above the J-pins provides circulation

above the slips, enabling packer retrieval if debris prevents normal retrieval.

32-A Tension-Set Packer



32-A Tension-Set Packer

Specifications

Casing

Recommended Casing Range

(in./mm)Packer Diameter

(in./mm)Box-Up, Pin-Down Thread Connection

(in.)

Product Number

Size (in./mm)

Weight (lb/ft, kg/m) Minimum Maximum

Minimum ID

Maximum OD Packer SC Valve

2-7/873.0

6.4 to 6.5 9.5 to 9.7

2.275 57.79

2.469 62.71

0.750 19.05

2.250 57.15

1.050 EU1 10 RD2 box1.250 EU 10 RD pin 620-25-000 525-04-000

376.2

7.7 to 10.2 11.5 to 15.2

2.992 76.00

3.068 77.93

0.750 19.05

2.781 70.64

1.050 EU 10 RD box 1.250 EU 10 RD pin 620-30-000 525-04-000

4 101.6

9.5 to 11.0 14.1 to 16.4

3.476 88.29

3.548 90.12

1.625 41.28

3.250 82.55 2-3/8 EU 8 RD 620-40-000 525-06-000

4-1/2 114.3

15.1 to 16.6 22.5 to 24.7

3.754 95.35

3.826 97.18

1.625 41.28

3.594 91.29

2-3/8 EU 8 RD

620-41-000 525-06-000

9.5 to 13.5 14.1 to 20.1

3.920 99.57

4.090 103.89

2.000 50.80

3.750 95.25 620-45-000 525-20-000

5 127.0

11.5 to 15.0 17.1 to 22.3

4.408 111.96

4.560 115.82

2.000 50.80

4.125 104.78 2-3/8 EU 8 RD 620-50-000 525-20-000

5-1/2 139.7

14.0 to 17.0 20.8 to 25.3

4.892 124.26

5.012 127.30

2.000 50.80

4.625 117.48

2-3/8 EU 8 RD

620-55-000

525-20-00020.0 to 23.0 29.8 to 34.2

4.670 118.62

4.778 121.36

4.500 114.30 620-57-000

6 152.4

15.0 to 20.0 22.3 to 29.8

5.352 135.94

5.524 140.31

2.000 50.80

5.000 127.00 2-3/8 EU 8 RD 620-60-000 525-20-000

6-5/8 168.3

24.0 to 28.0 35.7 to 41.7

5.791 147.09

5.921 150.39

2.500 63.50

5.500 139.70 2-7/8 EU 8 RD 620-65-000 525-25-000

7177.8

26.0 to 32.0 38.7 to 47.6

6.094 154.79

6.276 159.41

2.500 63.50

5.812 147.62

2-7/8 EU 8 RD

620-70-000

525-25-00017.0 to 23.0 25.3 to 34.2

6.366 161.70

6.538 166.07

6.200 157.48 620-72-000

7-5/8 193.7

26.4 to 33.7 39.3 to 50.2

6.765 171.83

6.969 177.01

2.500 63.50

6.453 163.91 2-7/8 EU 8 RD 620-75-000 525-25-000

8-5/8 219.1

24.0 to 40.0 35.7 to 59.5

7.725 196.22

8.097 205.66

3.000 76.20

7.500 190.50 3-1/2 EU 8 RD 620-85-000 525-35-000




Stradaset II Compression-Set Packer

Weatherford’s Stradaset II compression-set packer is a straddle assembly that isolates and selectively stimulates and tests multiple intervals and perforations in a single run. The interval spacing is adjustable to any length toaminimumof12in.(304.8mm).Thepackerisusuallyrunwithafluid-control valve and retrievable equalizing standing valve. The assembly has two packing-element sets to seal the top and bottom of the interval effectively.

Applications•Perforation cleanout•Selective acidizing and stimulation

Features,AdvantagesandBenefits•The standard tubing connections enable hydraulic tong makeup and

breakout to save rig time.•Theinternalbypassacrossbothelementsetsenablesfluidstoequalize

quickly and reduces the swabbing effect during run-in and retrieval for faster running.

•A one-quarter turn initially sets the packer, a pickup unsets it, and a slackoff resets it, simplifying operation over long intervals.

•The hydraulic hold-down pistons help to secure the packer in place, preventing pressure differential from unsetting it.

•The three-element packing systems on the interval top and bottom help to ensure a correct setting and packoff.

•Compressive forces on the booster sleeve between the sealing elements expand the elements radially outward to engage the casing, reducing the packoff force required.

•The adjustable spacing enables the isolation of short perforated intervals toensurethatalltheperforationsacceptstimulationfluids.

•Thefull-boremandrelenablesamaximumflowratefromthewell.•The manual jay mechanism enables repositioning without pipe rotation.•The simple design with few components to disassemble and reassemble

makes the packer easy and economical to redress.



Stradaset II Compression-Set Packer


Size (in./mm)


ID (in./mm) Gauge

OD (in./mm)

Mandrel ID

(in./mm)Standard Thread Connection


4-1/2 114.3

11.6 to 13.5 17.3 to 20.1

3.920 99.57

4.000 101.60

3.750 95.25 1.500

38.10 2-3/8 EU1 8 RD2

646-46

9.5 to 11.6 14.1 to 17.3

4.000 101.60

4.090 103.89

3.813 96.85 646-45

5 127.0

15.0 to 18.0 22.3 to 26.8

4.276 108.61

4.408 111.96

4.125 104.78 1.500

38.10 2-3/8 EU 8 RD

646-52

11.5 to 15.0 17.1 to 22.3

4.408 111.96

4.560 115.82

4.250 107.95 646-50

5-1/2 139.7

20.0 to 23.0 29.8 to 34.2

4.670 118.62

4.778 121.36

4.500 114.30 1.750

44.45 2-3/8 EU 8 RD

646-57

14.0 to 20.0 20.8 to 29.8

4.778 121.36

5.012 127.30

4.625 117.48 646-55

6-5/8 168.3

17.0 to 24.0 25.3 to 35.7

5.921 150.39

6.135 155.83

5.750 146.05

2.000 50.80 2-7/8 EU 8 RD 646-68

7 177.8

29.0 to 38.0 43.2 to 56.6

5.920 150.37

6.184 157.07

5.750 146.05

2.000 50.80 2-7/8 EU 8 RD

646-68

26.0 to 35.0 38.7 to 52.1

6.004 152.50

6.276 159.41

5.875 149.23 646-70

17.0 to 26.0 25.3 to 38.7

6.276 159.41

6.538 166.07

6.125 155.58 646-72




Weatherford’s gas-vent pumping packer simply and inexpensively isolates casing leaks and nonproductive perforations in rod-pump production installations. The packer also prevents gas from locking a pump during production in shallow wells. The interval between the cups is adjustable to any length with line pipe.

Applications•Shutting off casing leaks•Shutting off nonproductive perforations•Venting gas to the surface from below to prevent pump lockup

Features,AdvantagesandBenefits•Additional line pipe can be installed between the cups to adjust the

interval to any length when the casing leak is long or its location is unknown.

•The simple, inexpensive design enables packer setting with the existing differential pressure in the well, preventing additional rig time.

•Thebypassventenablesgastoflowintotheannulus,preventingpumplockupandmaximizingpumpefficiency.

•The dual cups shut off casing leaks and nonproductive perforations so that production continues from other zones.

Specifications

OD (in./mm) Line

Pipe Thread1

Packer

Metal-Component Maximum OD

(in./mm)

Minimum ID

(in./mm)Product NumberCasing Tubing Liner

4-1/2 114.3

2.375 60.33

3.000 76.20

3-in. 8V line pipe

3.813 96.85

2.687 68.25 420-45-000

5-1/2 139.7

2.375 60.33

3.000 76.20 3-in. 8V

line pipe4.000 101.60

2.750 69.85 420-55-000

2.875 73.03

4.000 101.60

3.125 79.38 420-56-000

7 177.8

2.375 60.33

4.000 101.60

4 1/2-in. LTC2

5.000 127.00 3.125

79.38

420-70-001

2.875 73.03

4.500 114.30

4 1/2-in. BTC3

5.200 132.08 420-72

1Supplied by the client2Long casing thread3Buttress thread coupling

Gas-Vent Pumping Packer



V-III Unloader Valve

Weatherford’s V-III unloader valve is a high-pressure accessory for a compression-set service packer. The valve enables pressure to equalize aboveandbelowthepackerbeforeitisunseated,anditenablesfluidbypass when running in or out of the hole. The high hanging weight capacity allows for a long tailpipe below the packer. The valve can be locked in the open or closed position by a quarter turn of the pipe.The valve can be equipped with tool joint connections to make it compatible with Weatherford’s DLT compression-set service packer. The torque rating of the valve is also compatible with the DLT packer.

Applications•High-pressure and high-temperature testing and treating•Drillstem and production testing

Features,AdvantagesandBenefits•The high-strength alloy steel construction has high-pressure and high-

temperature ratings, enabling deployment in severe service.•The top connection is keyed to prevent damaging torque overload.•The valve can be locked in the open or closed position by a quarter turn

of the pipe, providing simple operation on the rig.•Thevalvesealsareprotectedfromfluidflowintheopen position to

ensure correct operation.•Thelargebypassareaenableshighfluidcirculationrates.

Specifications

Size (in./mm)

Maximum OD

(in./mm)

Minimum ID

(in./mm)


(in.)Product Number

2-3/8 60.3

3.75 95.25

1.735 44.07

2-3/8 EU1 8 RD2 527-20-000

2-3/8 IF3 527-20-021

2-7/8 73.0

4.125 104.78

2.360 59.94 2-3/8 EU 8 RD 527-25-000

3-1/2 88.9

5.531 140.49

2.658 67.51 3-1/2 IF 527-35-021

4-1/2 114.3

7.266 184.56

3.734 94.84 4-1/2 IF

527-45-021

527-45-026

527-45-0271External upset2Round3Internalflush



Weatherford’s ECV storm valve is run above the DLT compression-set service packer or CSTH storm packer to isolate the tubing below the packer for disconnection during a weather emergency or surface-equipment repair.The valve has a J overshot running tool, which a quarter turn disconnects. This quick, safe, cost-effective well closing requires no tubing pulling. The valve can be repeatedly opened and closed, independent of the disconnection feature, enabling packer-pressure testing before disconnection.The heavy-duty bearing assembly enables free valve operation with the runningstringincompression,easingoperationonfloatingrigs.Beforepacker retrieval, the string can be reconnected and the valve opened to equalize pressure.

Applications•Weather emergencies•Wellhead repair

Features,AdvantagesandBenefits•The rugged alloy-steel construction ensures dependability.•Theinternal-flush(IF)drillpipetool-jointthreadconnectionsprovideexceptional,field-proventorsionalstrengthforrigs.

•Thesimple,field-provendesigneasesvalveoperationandredressing.•The J-tool disconnects with a quarter turn of the running string, providing fast,efficientvalveplacement.

•The valve can be opened and closed repeatedly with two quick turns, independent of the disconnection feature, enabling the packer to be pressure tested before disconnection to ensure its integrity.

•The expandable plug provides through-bore access for circulation and wirelines.

ECV Storm Valve



ECV Storm Valve

Specifications

Size (in./mm)

Maximum OD (in./mm)

Minimum ID (in./mm)


(in.)Product Number

7 177.8

5.500 139.70

1.500 38.10 3-1/2 IF PECV17800

7-5/8 193.7

6.380 162.05

1.500 38.10 3-1/2 IF PECV19400

9-5/8 244.5

8.000 203.20

1.500 38.10 3-1/2 IF PECV24300

2.130 54.10 4-1/2 IF PECV24400

11-3/4 298.5

10.250 260.35

2.130 54.10 4-1/2 IF PECV29800

13-3/8 339.7

11.500 292.10

2.130 54.10 4-1/2 IF PECV34000

16 406.4

14.000 355.60

2.130 54.10 4-1/2 IF PECV40600



Weatherford’s ANC storm valve is run above the DLT compression-set service packer or CSTH storm packer to isolate the tubing below the packer for disconnection during a weather emergency or surface-equipment repair.

The running string is disconnected by 15 left turns, and then the valve closes automatically. This quick, safe, cost-effective well closing requires no tubing pulling. The valve has an expandable plug that provides through-bore access for circulation or wireline passage. After the string is reconnected, the valve opens automatically to equalize pressure for packer retrieval.

Applications•Weather emergencies•Wellhead repair

Features,AdvantagesandBenefits•The rugged alloy-steel construction ensures dependability.•Thesimple,field-provendesigneasesvalveoperationandredressing.•The expandable plug provides through-bore access for circulation

and wirelines.•The valve equalizes automatically during string reconnection, enabling

fast packer retrieval.

Specifications

Size (in./mm)

Maximum OD

(in./mm)

Minimum ID

(in./mm)


(in.)Product Number

4-3/4 120.7

4.750 120.65

1.490 37.85 3-1/2 IF1 682-10-015

6-1/8 155.6

6.125 155.58

2.000 50.80 4-1/2 IF 682-20-018

1Internalflush

ANC Storm Valve



SC Tension Unloader Valve

Weatherford’s SC tension unloader valve is an accessory for a tension-set service packer, such as the 32-A packer, that enables pressure to equalize above and below the packer before it is unseated. The valve also provides afluidbypasswhenrunninginandoutoftheholeorspottreatingfluids.A high-strength collet sets the valve in the open or closed position, and a detent secures the valve in the position.

Applications•General-purpose service•Squeeze cementing•Testing and treating•Cased-hole production testing

Features,AdvantagesandBenefits•The valve opens by the set-down weight and closes by upstrain,

providing simple operation on the rig without rotation.•The bonded seal enables repeated opening, saving rig time.•Theunloadersealsareprotectedfromfluidflowintheopen position to

ensure the correct valve operation.•The large bypass provides high circulation rates.•The durable, high-strength alloy steel construction provides torque

transmission for packer operations.•The valve unloads pressure from either direction, ensuring the safe

unseating of tension-set packers.

Specifications

Size (in./mm)

Maximum OD

(in./mm)

Minimum ID

(in./mm)

Standard EU Thread Connection

(in.)Product Number

1-1/4 31.75

2.25 57.15

0.75 19.05 1.660 10 RD1 525-04-000

1-1/2 38.1

3.25 82.55

1.625 41.275 1.90 8 RD 525-06-000

2-3/8 60.325

3.75 95.25

250.8 2-3/8 8 RD 525-20-000

2-7/8 73.025

4.5 114.3

2.5 63.5 2-7/8 8 RD 525-25-000

3-1/2 88.9

5.469 138.913

3 76.2 3-1/2 8 RD 525-35-000

4-1/2 114.3

6.25 158.75

4 101.6 4-1/2 8 RD 525-45-000

1Round



Weatherford’s B perforation washer isolates selected intervals between heavy-dutypackercupsfortheinjectionofstimulationfluids.Thespacingbetween the cups can be adjusted with a 1-ft (0.3-m) minimum to optimize formation stimulation. The washer requires no rotation of the work string and has a bypass tube to equalize pressure above and below the washer and to enable reverse circulation around it. A reversing cup on the top of thewasherpreventsfluidfromreenteringperforations.

Applications•Perforation cleanout before gravel packing•Selective acidizing and stimulation

Features,AdvantagesandBenefits•The washer spacing can be adjusted on site, providing a versatile way to

accommodate variable perforation intervals for multiple wells.•No rotation is required to operate the washer, making it easy to run

and operate.•The internal bypass tube equalizes the pressure above and below

the washer, which eases running the tool by eliminating the buildup of positive or negative pressure in the casing.

•The heavy-wall, wire-reinforced packer cups and backup cups ensure reliable sealing.

•Theinternalbypasstubeenablesfluidanddebristobecirculatedoutofthe well to prevent formation damage or plugging during stimulation.

•Thereversingcupatthetopofthewasherpreventsfluidfromreenteringthe formation, optimizing treatment effectiveness.

•The simple washer design makes redressing easy and economical.

B Perforation Washer



B Perforation Washer

SpecificationsCasing Wash Tool

OD (in./mm)


Minimum ID

(in./mm)

Maximum ID

(in./mm)

Thimble OD

(in./mm)

Standard Connection

(in.)Product Number

2-7/8 73.025

6.4 to 6.5 9.7 to 9.8

2.441 62.001

2.215 56.261 1.90 NU 10 RD 460-25

4-1/2 114.3

9.5 to 13.5 14.3 to 20.3

3.920 99.568

4.090 103.886

3.765 95.631 2-3/8 EUE 8RD 460-45

5-1/2 139.7

14 to 17 21 to 26

4.892 124.257

5.012 127.305

4.640 117.856 2-7/8 EUE 8RD 461-45

7 177.8

26 to 29 39 to 44

6.184 157.074

6.276 159.410

5.766 146.456 3-1/2 EUE 8RD 460-70



Weatherford’s B rotational unloader valve can be opened and closed for fluidcommunicationbetweenthetubingandannulusaboveapackerorservice tool, such as Weatherford’s B perforation washer. The valve can be usedtoequalizepressureduringrunning,tospottreatfluid,andtodrainthe tubing during tool retrieval. The valve design protects the seals from fluidflowwhenthevalveisopen.

Applications•Testing and treating•General-purpose service•Squeeze cementing

Features,AdvantagesandBenefits•Thefield-provendesignofthedragblocksprovidefrictiontopreventthe

tubing from rotating, resulting in dependable valve operation.•The valve can be rotationally opened and closed to more accurately and economicallyspottreatfluidwhereneeded.

•Thelargebypassareaenableshighfluidcirculationratesfordebrisremoval, increasing the effectiveness of the stimulation.

•The valve has a full bore that provides access for wireline tools and other equipment for accurate temperature and pressure measurements.

B Rotational Unloader Valve



B Rotational Unloader Valve


OD (in./mm)


Minimum ID

(in./mm)

Maximum ID

(in./mm)

Maximum OD

(in./mm)ID

(in./mm)

Standard EUE1 8 RD2

Thread Connection (in.)

Product Number

4-1/2 114.3

9.5 to 10.5 14.3 to 15.9

3.920 99.568

4.090 103.886

3.75 95.25

1.938 49.225 2-3/8 551-45

5 127

18 to 21 27 to 32

4.154 105.512

4.276 108.610 3.75

95.251.938 49.225 2-3/8

551-51

13 to 15 20 to 23

4.408 111.963

4.560 115.824 551-50

5-1/2 139.7

13 to 26 20 to 39

4.548 115.519

5.105 129.591

4.411 112.039

1.938 49.225 2-3/8 551-55

6-5/8 168.275

20 to 34 30 to 51

5.575 141.605

6.049 153.645

5.380 136.652

2.484 63.093 2-7/8 551-68

7 177.8

20 to 38 30 to 57

5.920 150.368

6.465 164.211

5.516 140.106

1.938 49.225 2-3/8 551-70

5.723 145.364

2.484 63.093 2-7/8 551-72

7-5/8 193.675

24 to 29.7 36 to 45.0

6.435 163.449

7.125 180.975

6.25 158.75

2.484 63.093 2-7/8 551-76

8-5/8 219.075

24 to 40 36 to 60

7.60 193.04

8.097 205.664

7.5 190.5

2.907 73.838 3-1/2 551-85

1External upset end2Round



Weatherford’s ARM selective-treating packer is set by compression to isolate perforations for acid, chemical, and fracture treatments. The packer is run primarily on coiled tubing and can also be run with jointed tubing.Aportenableswellborefluidstobypassintotheannuluswhilethepackeris run to treating depth. The packer is set by moving the tubing up and down and then by applying moderate tubing compression. An internal equalizing valve provides easy packer release and enables the packer to be set multiple times. The bypass port is permanently closed and locked on thefirstpackersetting.Beforethepackercanbemovedorretrieved,thetreatingfluidsandpressurecapturedbetweentheelementsareequalizedwith the casing below.

Applications•Coiled or jointed tubing•Selective perforation acidizing, fracturing, and chemical treatments•Formation straddling and testing

Features,AdvantagesandBenefits•Straddlespacingiseasilyadjustableinthefieldin3-ft(1-m)lengths,

enabling the treatment of zones with varying thicknesses.•Theinternalfluid-bypassportenablestheannulustofillwhilerunningto

depth, reducing running time.•The packer setting and releasing procedures require no tubing rotation,

saving rig time.•The top element provides reverse circulation while the packer is set, and thebottomelementassistsinperforationflowbackandcleanupbeforethe packer is released.

•The high-tensile-strength connections between the elements enable high treatment pressures with minimal tubing compression.

•The packer reduces tri-axial stresses on the low end of the tubing string to reduce deformation and improve durability.

•The compact design maximizes the straddle spacing length in the lubricator, enabling large treatment volumes.

•Treatingfluidsarecontainedbetweentheelementsuntilthepackerisreleased to maximize the treatment effectiveness in the selected zone.

ARM Selective-Treating Packer



ARM Selective-Treating Packer


OD (in./mm)


ID (in./mm) Maximum

OD (in./mm)

Product NumberMinimum Maximum

4-1/2 114.3

9.5 to 11.6 14.1 to 17.3

4.000 101.60

4.090 103.89 3.771

95.78

ARM412

12.6 to 13.5 18.8 to 20.1

3.920 99.57

3.958 100.53 ARM413

5-1/2 139.7

15.5 to 17.0 23.1 to 25.3

4.892 124.26

4.950 125.73 4.641

117.88

ARM512

17.0 to 20.0 25.3 to 29.8

4.778 121.36

4.892 124.26 ARM513



Weatherford’sTTVtubingtestvalveisafield-proven,heavy-duty,fluid-control ball valve for high-pressure applications, such as testing tubing pressure, isolating a formation, and acidizing perforations. The valve is openduringrunningintheholetoenablefluidtofillthetubing.One-halfturn closes the valve for pressure testing and other applications.

Applications•Tubing-pressure testing•Washing and acidizing perforations•Temporary bridge plugging and formation isolation

Features,AdvantagesandBenefits•The one-half turn of the tubing makes the ball valve easy to open

and close.•The full-open bore reduces the swabbing effect during running in the well, maximizingefficiency.

•The valve can be opened and closed while the packer is in a tension, compression, or neutral condition without unsetting the packer to test it.

Specifications

Tubing (in./mm)

Valve

Maximum OD (in./mm)

Minimum ID (in./mm)

Standard Box-and-Pin Thread Connection

(in.)Product Number

2-3/8 60.3

3.771 95.78

1.750 44.45

2-3/8 EU1 8 RD2

23TTV.1001

4.500 114.30

2.000 50.80 23TTV.1002

2-7/8 73.0

5.500 139.70

2.500 63.50 2-7/8 EU 8 RD 27TTV.1001


TTV Tubing Test Valve



Tubing Test Valve

Weatherford’stubingtestvalveisafield-proven,fluid-controlflappervalvefor high-pressure applications, such as testing tubing pressure, isolating a formation, and acidizing perforations. The valve can be used with a packer set by tension or compression.Thevalveisopenduringrunningintheholetoenablefluidtofillthetubing.Applying pressure to the tubing string closes the valve at any depth for pressure testing or other applications.

Applications•Tubing-pressure testing•Washing and acidizing perforations•Temporary bridge plugging and formation isolation

Features,AdvantagesandBenefits•Aneasyquarter-leftturnandset-downopentheflapper,andastraight

pull closes it.

Specifications

Tubing (in./mm)

Valve

Maximum OD

(in./mm)

Minimum ID

(in./mm)

Standard Box-and-Pin Thread Connection

(in.)Product Number

2-3/8 60.3

3.750 95.25

1.875 47.63 2-3/8 EU1 8 RD2 522-20-000

2-7/8 73.0

5.375 136.53

2.500 63.50 2-7/8 EU 8 RD 522-25-000




Weatherford’s 8000 series casing scraper removes cement and mud sheath, scale, rust and other foreign matter from the casing wall during bit runs. The scraper smoothes the casing wall, preparing it for running and setting production packers and squeeze tools. The scraper has six blades arranged to provide the maximum cutting surface for vertical and rotational scraping.

Applications•Cleanout bit runs•Casing maintenance before running a packer

Features,AdvantagesandBenefits•The six-blade design provides 360° casing coverage for

superior scraping.•The one-piece retainer secures the blades.•The splined two-piece body provides maximum blade retention.•The rugged cast and heat-treated blades provide a long service life.•While scraping the casing wall, the blades act as casing drift to ensure

that tools can be run through the casing without sticking.•The spring-loaded setting scrapes multiple-weight casing strings in a

single trip, saving rig time.•The rugged design requires minimal maintenance, saving rig time

and cost.

Series 8000 Casing Scraper



Series 8000 Casing Scraper

SpecificationsCasing Scraper

OD (in./mm)


Blade Diameter

ID (in./mm)


(in.)

Product Number

Collapsed (in./mm)

Extended (in./mm) Scraper Blades

4 101.6

5.6 to 12.6 8.3 to 19.0

3.30 83.82

3.73 94.74

0.75 19.05 2-3/8 EUE1 8 RD2 8400

84021.0 25.4 2-3/8 API Reg. 8450

4-1/2 114.3

9.5 to 15.1 14.3 to 22.7

3.656 92.862

4.135 105.029

1.0 25.4 2-3/8 API Reg. 8450 8452-1

5 127

21 32

3.656 92.862

4.135 105.029

1.0 25.4 2-3/8 API Reg. 8450

8452-1

15 to 18 23 to 27

4.130 104.902

4.575 116.205 8452-2

11.5 to 15 17.3 to 23

4.295 109.093

4.710 119.634 8452-3

5-1/2 139.7

14 to 23 21 to 34

4.445 112.903

5.070 128.778 1.25

31.75 2-7/8 API Reg. 8550

8552-1

13 to 17 20 to 26

4.641 117.881

1.75 44.45 8552-2

6 152.4

10.5 to 23 15.9 to 34

5.010 127.254

5.910 150.114

1.25 31.75 2-7/8 API Reg. 8550 8552-3

6-5/8 168.275

32 48

5.010 127.254

5.910 150.114

1.25 31.75 2-7/8 API Reg. 8550 8552-3

12 to 28 18 to 42

5.630 143.002

6.30 160.02

1.5 38.1 3-1/2 API Reg. 8700 8702-1

1External upset end2Round


Weatherford provides comprehensive solutions to your well completion needs.With experienced operators and engineers who are devoted to technological innovation, Weatherford provides comprehensive solutions to meet every completion challenge.

ComprehensiveSolutions

weatherford.comWeatherford products and services are subject to the Company’s standard terms and conditions, available on request or at weatherford.com. For more information contact an authorized Weatherford representative. Unless noted otherwise,trademarksandservicemarkshereinarethepropertyofWeatherford.Specificationsaresubjecttochangewithoutnotice.Weatherfordsellsitsproductsandservicesinaccordancewiththetermsandconditionssetforth in the applicable contract between Weatherford and the client.

© 2010 Weatherford. All rights reserved. 1205.01

HOUSTON

CALGARY ABERDEEN

KUALA LUMPUR

DUBAI

BUENOS AIRES

MOSCOW

Regional officesWeatherford locations

Corporate headquarters

Advanced engineering and ultra-modern manufacturing locations worldwide allowWeatherford’s Packer Systems to quickly react to clients’ requirements.

Contact your Weatherford representative or visit weatherford.com.

Documents

Packer Service Tools