Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
17pack
Pack 17
Stage 71
Rearview mirror and internal panelsStage 72
Installing the roof frameStage 73
Tailgate panelStage 74
Installing the rear lightsStage 75
Installing the ignition coil
Editorial by: Milanoedit srl, milanoedit.com Translation by: TperTradurre
Picture credits: NBCUniversal Archive
©️ 2019 Universal City Studios LLC. Fast & Furious and all related marks and characters are trademarks and copyrights of Universal Studios.All Rights Reserved.
Dodge, HEMI and related logos, vehicle model names and trade dress are trademarks of FCA US LLC and used under license by Premium and Collectibles Trading Co. Ltd. ©2019 FCA US LLC.
©️ 2019 Editorial Planeta DeAgostini S.A.U. Todos los derechos reservados.
©️ 2019 De Agostini Publishing Italia S.p.A. Tutti i diritti riservati.
Warning: Not suitable for children under the age of 14.
This product is not a toy and is not designed or intended for use in play.
Items may vary from those shown.
STAGE
281
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience. Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
Publi
sher
Not
e: th
e app
eara
nce o
f the
par
ts sh
own
on th
ese p
ages
may
diff
er fr
om th
at of
the p
ieces
inclu
ded
in th
is pa
ck.
This
in n
o way
affe
cts t
he q
ualit
y or a
ssem
bly i
nstru
ction
s.
PIECES FOR THIS STAGE
In this assembly session you will mount the rearview mirror and the interior panels on the front mounting brackets. Follow our instructions carefully, using the illustrations to help you.
71A Left front interior panel71B Right front interior panel71C Rearview mirror arm
71D Rearview mirror housing71E Rearview mirrorBP Screws 1.7 × 3x5 mm (x 3) *
CM Screws 1.7 × 3 mm (x 2) *
FRONT INTERIOR PARTS
REARVIEW MIRROR AND INTERNAL PANELS
71
71A
71C 71D 71E
71B
BP CM
282
71.1 Insert the curved end of the rearview mirror arm 71C into the back of the housing 71D and secure the two pieces in question with a type CM screw.71.2 remove the protective film from the back of the rearview mirror 71E and stick it into the housing 71D.
71.3 Get the car body that you completed in assembly session 70. Find the front left mounting bracket and position, from the inside, panel 71A, marked with the letter L. The small hole in the bottom of the panel must align with the hole in the bracket.
71C
71DCM
71D
71E
71A
61A
STAGE 71
283
71.4 to secure panel 71A, insert a type BP screw from the outside of the bracket.
71.5 In the same way, position panel 71B on the inner side of the bracket, as shown in the illustration. Again, ensure that the hole in the bottom of the panel is aligned with the hole in the bracket.
61A
71B
BP
71A
61A
STAGE 71
284
STAGE 71 FINAL RESULT
You have now assembled the rearview mirror and attached the interior panels to the front mounting brackets.
71.6 secure the pieces using a type BP screw. BP
61A
71B
STAGE 71
STAGE
285
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience. Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
Publi
sher
Not
e: th
e app
eara
nce o
f the
par
ts sh
own
on th
ese p
ages
may
diff
er fr
om th
at of
the p
ieces
inclu
ded
in th
is pa
ck.
This
in n
o way
affe
cts t
he q
ualit
y or a
ssem
bly i
nstru
ction
s.
PIECES FOR THIS STAGE
In this assembly session you will install the roof frame in the car body. Follow our instructions carefully, using the illustrations to help you.
INSTALLING THE ROOF FRAME
72A Roof frame CM Screws 1.7 × 3 mm (x 2) * LM Screws 2.3 × 4 mm (x 11) *
* Some of the parts are spares.
ROOF
72
72A
CM LM
286
72.2 Insert the roof frame into the middle section of the car body 61A and insert four type LM screws into the front mounting holes. Do not tighten them completely yet.
72.1 attach the end of the rearview mirror arm 71C to the middle linchpin on the front of the roof frame 72A, as shown in the illustration. Secure the piece with a type CM screw.
61A
71C
72A
CM
72ALM
LM
STAGE 72
287
72.3 Insert three more type LM screws: one into the middle section of the roof frame 72A and two into the side holes. Again, do not tighten them completely.
72.4 Insert the last four type LM screws into the rear holes in the roof frame 72A and partially tighten them.
LM
LM
LM
72A
LM LM
72A
STAGE 72
288
STAGE 72 FINAL RESULT
You have now secured the roof frame and rearview mirror to the middle section of the car body.
72.5 now tighten all eleven LM screws securely, making sure that they all tightened evenly.
72A
STAGE 72
STAGE
289
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience. Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
73A
73B 73C 73D 73F 73G73E
AP
Publi
sher
Not
e: th
e app
eara
nce o
f the
par
ts sh
own
on th
ese p
ages
may
diff
er fr
om th
at of
the p
ieces
inclu
ded
in th
is pa
ck.
This
in n
o way
affe
cts t
he q
ualit
y or a
ssem
bly i
nstru
ction
s.
PIECES FOR THIS STAGE
In this assembly session you will attach all the respective components and accessories to the tailgate panel. Follow our instructions and accompanying illustrations carefully.
TAILGATE PANEL
73A Tailgate panel73B Boot lock, piece 173C Boot lock, piece 2 (x 2)73D Boot lock, piece 3
73E Boot lock spring73F Boot lock cylinder73G Boot lock cylinder springAP Screws 1.7 × 4 mm (x 5) * * Some of the parts are spares.
BOOT
73
290
73.1 Put the lock spring 73E between the linchpins on the ends of each piece 2 of the lock 73C, as shown in the illustration.
73.2 Insert the linchpins on the piece you have just assembled into the inside holes in piece 1 of the lock 73B.
73C
73C73E
73B
73C
STAGE 73
291
73.3 now position the piece on the tailgate panel 73A. Look at the illustration to understand the correct position. Secure the piece with two type AP screws.
73.4 Insert the lock cylinder 73F into the central hole in piece 3 of lock 73D, as shown in the illustration. Then place the cylinder spring 73G inside the cylinder 73F.
73D
73F
73G
73A
73B
73C
APAP
STAGE 73
292
STAGE 73 FINAL RESULT
You have now attached all the components of the lock mechanism to the tailgate panel.
73.5 hold the cylinder spring 73G in place and position piece 3 of the lock 73D on the two linchpins in the middle of the inside of the tailgate panel 73A. Secure the pieces with two type AP screws.
73D
73G
73A
APAP
STAGE 73
STAGE
293
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience. Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
Publi
sher
Not
e: th
e app
eara
nce o
f the
par
ts sh
own
on th
ese p
ages
may
diff
er fr
om th
at of
the p
ieces
inclu
ded
in th
is pa
ck.
This
in n
o way
affe
cts t
he q
ualit
y or a
ssem
bly i
nstru
ction
s.
PIECES FOR THIS STAGE
In this assembly session you will install the rear lights of your model car. Follow our instructions and the accompanying illustrations carefully.
INSTALLING THE REAR LIGHTS
74A Rear body panel74B Left rear light74C Right rear light74D Left rear light cover74E Right rear light cover
74F Coil bracket74G High voltage terminals (x 2)74 H Ignition coil74I High voltage cableCP screws 2 × 5 mm (x 10) *
DP screws 1.5 × 5 mm (x 5) * KM screws 1.7 × 4 mm (x 2) *PP screws 2 × 4x5 mm (x 13) *QP screws 1.7 × 3.5mm (x 2) *MP screws 1.7 × 3.5 mm (x 4) *
* Some of the parts are spares.
REAR LIGHTS
74
74A
74C
74F
CP DP KM PP QP
74G 74H 74I
74D 74E
74B
294
STAGE 74
74.1 locate the wiring for the rear lights 47C at the back of your model and carefully disconnect the part with the LED lights, separating them from the connector.
74.2 PosItIon the left and right rear lights (74B and 74C) as shown in the illustration. Insert the LED lights on the wiring 47C into the two holes in each rear light. The shorter wire of the wiring 47C corresponds to the right rear light 74C, while the longer one attaches to the left rear light 74B.
47C
74C
47C
74B
74.3 attach the left rear light cover 74D and the right rear light cover 74E to the two corresponding rear lights 74B and 74C. Secure both covers with two type DP screws.
47C
74B
74C
74E
74D
DP
DPDP
DP
295
STAGE 74
74.4 Get the tailgate panel you assembled in the last assembly session and insert the rear lights 74B and 74C. Secure the pieces with four type CP screws. The close-up image shows you where the wire should be.
74.5 Get the body of your car and put it roof-down on the work surface. Put the rear body panel 74A in place and secure it with nine type PP screws.
74.6 From the InsIde of the car body, insert the tailgate panel 73A complete with the rear lights.
CPCP
CPCP
74C
74B
73A
62A
74A
PP
PP
PP
PPPP
73A
62A
296
STAGE 74
STAGE 74 FINAL RESULT
This is the result of this interesting assembly session. Put everything you have done so far in a safe place.
74.7 turn the car body over and from underneath insert four type CP screws into the holes in the tailgate panel 73A.
74.9 attach the ignition coil 74H to the coil bracket 74F using a type QP screw. Put everything you have built so far in a safe place until you need it again.
74.8 From above insert two type PP screws into the rear section of the car body 62A.
QP
74F
74H
CPCP
CP CP
62A73A
PPPP62A
STAGE
297
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience. Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
Publi
sher
Not
e: th
e app
eara
nce o
f the
par
ts sh
own
on th
ese p
ages
may
diff
er fr
om th
at of
the p
ieces
inclu
ded
in th
is pa
ck.
This
in n
o way
affe
cts t
he q
ualit
y or a
ssem
bly i
nstru
ction
s.
PIECES FOR THIS STAGE
In this assembly session you will install the ignition coil in the engine housing and mount the left boot panel on the body.
INSTALLING THE IGNITION COIL
75A Left boot panel75B Fuel hose
KP screws 2 × 4 mm (x 2) *SM screws 2 × 4x5 mm (x 6) *
* Some of the parts are spares.
SERBATOIO E ALTOpARLAnTEBOOT AnD EnGInE HOUSInG
75
75B
75A
KP SM
298
STAGE 75
75.1 locate the front right chassis beam cover plate 9H (piece 1). Remove the type CM screw on the right, as shown in the illustration, but do not remove the cover. Insert the linchpin on the coil bracket 74F into the hole where the screw was and secure the pieces with a type KM screw, provided with the previous assembly session.
75.2 Get one of the high voltage terminals 74G and insert it into the middle hole in the distributor cap 16D. Connect the ends of the high voltage cable 74I to the top linchpin on the ignition coil 74H and the high voltage terminal 74G.
9H
74F
9H
KM
74I74G
74J
74H
299
STAGE 75
75.3 Get the car body and carefully turn it over. Insert the curved end of the fuel hose 75B into the hole in the rear section of the car body 62A, as indicated in the illustration. From above, secure it with a type KP screw, making sure the piece faces the same way as that in the illustration.
75.4 attach the left boot panel 75A to the inside of the left side of the car body. Align the five linchpins with the corresponding holes in the car body.
KP
75B
62A
75A
62A
61A
300
STAGE 75
STAGE 75 FINAL RESULT
You have now connected the coil to the engine ignition system and attached the left boot panel to the car body.
75.5 use five type SM screws to secure the left boot panel to the car body.SM
SM
SMSM
SM
75A