Upload
lyanh
View
222
Download
3
Embed Size (px)
Citation preview
PinPoint Matrix card
The PinPoint Matrix card provides a 4highway x 96 Channel switching resourcefor routing analog signals to and from thePinPoint front panel.
This allows internal analog test signals to be routed to the
DUT (Device Under Test) automatically and signals from the
DUT to be switched through to the appropriate internal
measurement instrument.
The card does not require calibration and is included in
the system self test, using loop-back connectors to
test functionality.
P2M PinPoint Matrix Card
For your local office details please visit our web site: www.diagnosys.com
Matrix Card for the PinPoint system
Option - cards can be fitted as required.
Technical Specifications
The Switch Matrix Card is a 4 Row x 96 Column relay
matrix, designed for routing analog signals to and from
the front panel. The 4 rows can be used to route internal
signals (eg DMM, ARB etc) or signals derived from
external sources.
u Max Contact Resistance <0.15Ω
u Max Switching Current <500mA
u Max Carry Current <1.2A
u Max switching voltage <200V
6062_Diagnosys_P2M_DS 23/12/2009 09:37 Page 1
Edge Test Card for the PinPoint system
Option - up to 13 cards can be fitted
Diagnosys has a policy of continuous product improvement and reserves the right to change technical specificationsat any time without prior notice. Diagnosys does not accept liability for errors or misprints in this document.
For your local office details please visitour web site: www.diagnosys.com
P2E PinPoint Edge Test Card
PinPoint Edge Test Card
This card is purpose designed for digitaltesting at an edge connector.
Each card provides 128 fixed TTL drive and sense level
channels per card. Additional cards can be added to the
system providing up to 1,664 individual test channels.
The card derives its references from an internal card and
therefore does not need calibrating.
The card is automatically tested when the TestVue software
is initialised providing confidence in the correct operation.
Technical Specifications
u 128 channels per card.
u 128Kb memory per pin (64Kb driver and 64Kb Sensor)
u Fixed TTL drive and sense levels
u Each channel fully bi-directionaland tri-state
u Expandable to 1,664 channels
6062_Diagnosys_P2M_DS 23/12/2009 09:37 Page 2