1
Actual Size DASH NUMBER* INDUCTANCE @ 1 kHz (µH) ±15% MIL DASH # DC RESISTANCE MAXIMUM (OHMS) CURRENT RATING MAXIMUM (Amps) INCREMENTAL CURRENT DC (Amps) Mechanical Configuration Units are encapsulated in a Surface Mount package,using an epoxy molded case. High resistivity ferrite core, allows for high inductance with low DC resistance. Physical Parameters Inches Millimeters A 0.840 to 0.880 21.34 to 22.35 B 0.310 to 0.330 7.87 to 8.38 C 0.266 to 0.286 6.76 to 7.26 D 0.050 Min. 1.27 Min. E 0.070 to 0.110 1.78 to 2.79 F 0.750 (Ref. only) 19.05 (Ref. only) G 0.120 (Ref. only) 3.05 (Ref. only) Dimensions “A” and “C” are over terminals. Operating Temperature Range –55°C to +130°C Current Rating at 85°C Ambient 45°C Rise Maximum Power Dissipation at 85°C 0.50 W Inductance Measured at 1 VAC open circuit with no DC current Incremental Current The current at which the inductance will decrease by a maximum of 5% from its inductance at zero DC current. Weight (Grams Max.) 2.5 Packaging Tape & reel (44mm): 13" reel, 480 pieces max.; 7" reel not available Lead Finish Sn63Pb37 (Tin-Lead) Hot Solder Dipped Made In the U.S.A. Power Inductors 270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: [email protected] • www.delevan.com M27/370 - SERIES MIL8532 FERRITE CORE -01L -02L -03L -04L -05L -06L -07L -08L -09L -10L -11L -12L -13L -14L -15L -16L -17L -18L -19L -20L -21L -22L -23L -24L -25L -26L -27L -28L -29L -30L -31L -32L -33L -34L -35L -36L -37L -38L -39L -40L -41L -42L -43L -44L -45L -46L -47L -48L -49L -50L -51L -52L 6.4 5.8 5.2 4.8 4.3 3.9 3.5 3.2 2.9 2.7 2.5 2.2 2.0 1.8 1.6 1.5 1.4 1.2 1.1 1.0 0.93 0.85 0.77 0.71 0.64 0.58 0.52 0.48 0.43 0.39 0.35 0.32 0.29 0.27 0.25 0.22 0.20 0.18 0.16 0.15 0.14 0.12 0.11 0.10 0.09 0.09 0.08 0.07 0.06 0.06 0.05 0.05 6.27 5.95 5.67 5.43 5.22 5.03 4.70 4.56 4.01 3.84 3.69 3.55 3.27 3.09 2.97 2.84 2.66 2.25 2.17 2.05 1.84 1.65 1.56 1.53 1.30 1.12 1.04 0.99 0.84 0.80 0.74 0.68 0.59 0.56 0.49 0.42 0.39 0.37 0.34 0.30 0.28 0.25 0.23 0.20 0.19 0.18 0.15 0.13 0.12 0.12 0.10 0.09 0.009 0.010 0.011 0.012 0.013 0.014 0.016 0.017 0.022 0.024 0.026 0.028 0.033 0.037 0.040 0.044 0.050 0.070 0.075 0.084 0.104 0.130 0.145 0.152 0.208 0.283 0.330 0.362 0.505 0.557 0.650 0.770 1.03 1.14 1.50 1.98 2.30 2.55 3.00 4.00 4.40 5.80 6.56 8.63 10.1 11.2 15.0 20.8 23.4 26.0 36.0 40.0 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 270.0 330.0 390.0 470.0 560.0 680.0 820.0 1000.0 1200.0 1500.0 1800.0 2200.0 2700.0 3300.0 3900.0 4700.0 5600.0 6800.0 8200.0 10000.0 12000.0 15000.0 18000.0 -01 -02 -03 -04 -05 -06 -07 -08 -09 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45 -46 -47 -48 -49 -50 -51 -52 SERIES MIL8532 High Current, MIL-PRF-27/370 Qualified Surface Mount Power Inductors M I L I TA R Y A P P R O V E D *Complete part # must include series # PLUS the dash # 1/2009

P SERIES MIL8532 A M I L I T AR PR O ... - pdf.datasheet.livepdf.datasheet.live/datasheets-1/api_delevan/M27_370-19.pdf · Title: APIcatalog_newlayouts Author: API Delevan, Inc. Subject:

  • Upload
    buihanh

  • View
    214

  • Download
    0

Embed Size (px)

Citation preview

  • Actual Size

    DASH NUMBER*

    INDUCTANCE @ 1 kHz

    (H) 15%

    MIL DASH #

    DC RESISTANCE

    MAXIMUM (OHMS)

    CURRENT RATING

    MAXIMUM (Amps)

    INCREMENTAL

    CURRENT DC (Amps)

    Mechanical Configuration

    Units are encapsulated in a Surface Mount package,usingan epoxy molded case. High resistivity ferrite core, allowsfor high inductance with low DCresistance.

    Physical Parameters

    Inches MillimetersA 0.840 to 0.880 21.34 to 22.35B 0.310 to 0.330 7.87 to 8.38C 0.266 to 0.286 6.76 to 7.26D 0.050 Min. 1.27 Min.E 0.070 to 0.110 1.78 to 2.79F 0.750 (Ref. only) 19.05 (Ref. only)G 0.120 (Ref. only) 3.05 (Ref. only)Dimensions A and C are over terminals.

    Operating Temperature Range 55C to +130C

    Current Rating at 85C Ambient 45C Rise

    Maximum Power Dissipation at 85C 0.50 W

    Inductance

    Measured at 1 VAC open circuit with no DC current

    Incremental Current The current at which theinductance will decrease by a maximum of 5% fromits inductance at zero DC current.

    Weight (Grams Max.) 2.5

    Packaging Tape & reel (44mm):13" reel, 480 pieces max.; 7" reel not available

    Lead Finish Sn63Pb37(Tin-Lead) Hot Solder Dipped

    Made In the U.S.A.

    Power Inductors

    270 Quaker Rd., East Aurora NY 14052 Phone 716-652-3600 Fax 716-652-4814 E-mail: [email protected] www.delevan.com

    M27/370 - SERIES MIL8532 FERRITE CORE -01L -02L -03L -04L -05L -06L -07L -08L -09L -10L -11L -12L -13L -14L -15L -16L -17L -18L -19L -20L -21L -22L -23L -24L -25L -26L -27L -28L -29L -30L -31L -32L -33L -34L -35L -36L -37L -38L -39L -40L -41L -42L -43L -44L -45L -46L -47L -48L -49L -50L -51L -52L

    6.45.85.24.84.33.93.53.22.92.72.52.22.01.81.61.51.41.21.11.00.930.850.770.710.640.580.520.480.430.390.350.320.290.270.250.220.200.180.160.150.140.120.110.100.090.090.080.070.060.060.050.05

    6.275.955.675.435.225.034.704.564.013.843.693.553.273.092.972.842.662.252.172.051.841.651.561.531.301.121.040.990.840.800.740.680.590.560.490.420.390.370.340.300.280.250.230.200.190.180.150.130.120.120.100.09

    0.0090.0100.0110.0120.0130.0140.0160.0170.0220.0240.0260.0280.0330.0370.0400.0440.0500.0700.0750.0840.1040.1300.1450.1520.2080.2830.3300.3620.5050.5570.6500.7701.031.141.501.982.302.553.004.004.405.806.568.6310.111.215.020.823.426.036.040.0

    1.01.21.51.82.22.73.33.94.75.66.88.210.012.015.018.022.027.033.039.047.056.068.082.0100.0120.0150.0180.0220.0270.0330.0390.0470.0560.0680.0820.01000.01200.01500.01800.02200.02700.03300.03900.04700.05600.06800.08200.010000.012000.015000.018000.0

    -01-02-03-04-05-06-07-08-09-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28-29-30-31-32-33-34-35-36-37-38-39-40-41-42-43-44-45-46-47-48-49-50-51-52

    SERIES MIL8532High Current, MIL-PRF-27/370 QualifiedSurface Mount Power Inductors

    MIL I TARY

    AP P R O V E

    D

    *Complete part # must include series # PLUS the dash #

    1/2009

    API_newlayouts_single:APIcatalog_newlayouts 8/26/10 9:41 AM Page 80