Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
ROAD BLOCKERSBOLLARDSARM BARRIERSTYRE KILLERS
www.ozak-t.com
ozak
-t.com
OZAK, founded in 1974, is the first and leading pedestrian and vehicle passage control systems manufacturer in Turkey. ÖZAK’s manufacturing expertise includes product groups of road blockers, bollards, arm barriers, tyre killers and turnstiles. OZAK; providing high quality and reliable solutions, has manufacturing facilities with a total area of 14.000 m2 of which 9600 m2 covered is the correct choice for many companies in a broad geography covering more than 75 countries.
The product range includes “vehicle” and “pedestrian” passage control system in following type of products:
• Road Blockers • Turnstiles • Speed Gates • Arm Barriers • Bollards • Tyre Killer / Spike Barrier • Custom Designed Turnstiles and Passage Control Systems
OZAK has a comprehensive reference range with its applications in Europe, Americas , Middle East, Arabian Peninsula, Far East and Asia for;
• Stadium Complexes • State Institutions • Industrial Plants • Airport Premises • Universities and other Education Institutions • Hotels, Tourism and Historical Facilities • Military and Defence Facilities • Power Plants • Sites which require vehicle access control especially classified as under high risk
OZAK, investing in human resources, technology and environmental protection; thanks to its talented designers and engineers, design and build products using the state of the art technologies and flexible manufacturing processes. R&D activities are handled by a team of professionals and each team member offers his utmost contribution to provide the customers with the solutions which meet overall demands of the security sector based on the vision of cost effective innovations and international standards.
About us
Fields of Use
RO
AD
BLO
CKER
HRB ROAD BLOCKER(Heavy Duty Model)
Power :
Control Pack :
Speed :
IP Rating :
Crash / Impact Rating :
Standard 380V 3-Phase 50/60 Hz, 3,3 - 5,5 KvA motor (varies depending on blocker size).Opt. 220V, 110V 1-Phase 50/60 Hz; or 24V DC
24V DC powered and PLC control unit is placed in power unit cabinet.Solenoids 24V DC (Ops.12V DC / 220V AC)
Standard Operation ~2,5 - 6 sec. (ascend/descend) depending on unit dimensions. Emergency raise up (upwards) by optional hydraulic accumulator ~1,5 sec. and may vary depending on unit dimensions.
IP 55 - Hydraulic Power Unit,IP 58 - Blocker Cabinet (underground unit),IP 67 - Electronics (optional), protection with housing/box,IP 68 - Hydraulic Piston
M50 P1 (K-12) crash tested and certified (HRB 30 R 90) according to ASTM 2656-07, Designed and produced to withstand H30.
HRB 10R60
HRB 15R60
HRB 20R60
HRB 25R60
HRB 30R60
HRB 35R60
HRB 35R60/2p
HRB 40R60
HRB 40R60/2p
HRB 45R60/2p
HRB 50R60/2p
HRB 55R60/2p
HRB 60R60/2p
HRB 65R60/2p
HRB 10R90
HRB 15R90
HRB 20R90
HRB 25R90
HRB 30R90
HRB 35R90
HRB 35R90/2p
HRB 40R90
HRB 40R90/2p
HRB 45R90/2p
HRB 50R90/2p
HRB 55R90/2p
HRB 60R90/2p
HRB 65R90/2p
x = 5,5m Blocker Unit Width, 90-70cm Raising Height (2 pistons)x = 6,0m Blocker Unit Width, 90-70cm Raising Height (2 pistons)x = 6,5m Blocker Unit Width, 90-70cm Raising Height (2 pistons)
x = 5,0m Blocker Unit Width, 90-70cm Raising Height (2 pistons)
x = 1,5m Blocker Unit Width, 90-70cm Raising Heightx = 2,0m Blocker Unit Width, 90-70cm Raising Heightx = 2,5m Blocker Unit Width, 90-70cm Raising Heightx = 3,0m Blocker Unit Width, 90-70cm Raising Heightx = 3,5m Blocker Unit Width, 90-70cm Raising Heightx = 3,5m Blocker Unit Width, 90-70cm Raising Height (2 pistons)x = 4,0m Blocker Unit Width, 90-70cm Raising Height
x = 5,0m Blocker Unit Width, 65-50cm Raising Height (2 pistons)
1275 x 6170 x 975x = 5,5m Blocker Unit Width, 65-50cm Raising Height (2 pistons)
1275 x 6670 x 975x = 6,0m Blocker Unit Width, 65-50cm Raising Height (2 pistons)x = 6,5m Blocker Unit Width, 65-50cm Raising Height (2 pistons)
x = 1,0m Blocker Unit Width, 90-70cm Raising Height
x = 1,0m Blocker Unit Width, 65-50cm Raising Height 1275 x 1170 x 975x = 1,5m Blocker Unit Width, 65-50cm Raising Height 1275 x 1670 x 975x = 2,0m Blocker Unit Width, 65-50cm Raising Height 1275 x 2170 x 975x = 2,5m Blocker Unit Width, 65-50cm Raising Height 1275 x 2670 x 975x = 3,0m Blocker Unit Width, 65-50cm Raising Height 1275 x 3170 x 975x = 3,5m Blocker Unit Width, 65-50cm Raising Height 1275 x 3670 x 975
1275 x 3670 x 975x = 3,5m Blocker Unit Width, 65-50cm Raising Height (2 pistons)1275 x 4170 x 9751275 x 4170 x 975
x = 4,0m Blocker Unit Width, 65-50cm Raising Height
1275 x 4670 x 975x = 4,0m Blocker Unit Width, 65-50cm Raising Height (2 pistons)
1275 x 5170 x 975
x = 4,0m Blocker Unit Width, 90-70cm Raising Height (2 pistons)x = 4,5m Blocker Unit Width, 90-70cm Raising Height (2 pistons)
x = 4,5m Blocker Unit Width, 65-50cm Raising Height (2 pistons)
1275 x 5670 x 975
Rais
ing
Hei
ght 6
5-50
cm
Rais
ing
Hei
ght 9
0-70
cm
H = 60 cm / L x W x D (mm)
H = 90 mmH = 90 cm / L x W x D (mm)
1680 x 1170 x 12701680 x 1670 x 12701680 x 2170 x 12701680 x 2670 x 12701680 x 3170 x 12701680 x 3670 x 12701680 x 3670 x 1270
1680 x 6670 x 1270
1680 x 4170 x 12701680 x 4170 x 12701680 x 4670 x 12701680 x 5170 x 12701680 x 5670 x 12701680 x 6170 x 1270
Axle Load Resistance :
Hydraulic Cylinder Unit :
*Design and specifications are subject to change without notice.
50T
Heavy duty, dust sealed electrostatic powder coated hydraulic cylinder.Models between 1- 4 meter widths contain a single piston.(Double piston versions are optionally available for models 3,5 & 4 meter widths).Models between 4,5 - 6,5 meter widths contain double pistons.Cylinder unit features a safety valve against leakage and hose failure.
Hydraulic Power Unit :
Down, Up, Emergency and external sensor inputs/outputs (e.g. Loop Detector, Beam Detector, Signalization, Remote Control, etc.). System alerts with an audio signal during lowering and raising operation.A loud siren output in case of alarm or emergency.Can be lowered or raised automatically in case of emergency (User’s preference).Can be lowered and raised manually in case of power failure or during the maintenance service with manual pump and manual valve feature. Automatic raise up mode deploys (optionally with synchronized loop detector) the road blocker after the vehicle has passed over).Sensor controlled stopping both at the top and bottom positions of the blocker unit
Motor, hydraulic pump and solenoid valves are contained in an easily accessible hot-dip-galvanized and electrostatic powder painted cabinet with a built-in lock lid. (Opt. Stainless Steel Cabinet) Cabinet Dimensions: 1000 mm x 570 mm x 1200 mm (W x L x H).
All parts are colored with industrial paint with two components.U-shaped profile structure for maximum strength.The blocker and cabinet are designed so that no vehicle crashing effect can displace it after embedded or installed in to the ground.
All parts are colored with industrial paint with two components.Hop dip galvanised vehicle pass through surface (top plates).The construction is aesthetically and functionally completed with reflecting strips and warning signs.The hinge system is specially designed to have a flattened surface level with the top plate so that vehicles can pass over smoothly and quietly. With the help of hidden hinge system feature during the upward/downward running operation the gap at the blocker top plate back-edge and cabinet housing stays at 2mm maximum providing a critically important safety feature during operation of the road blocker.The blocker unit is made of a reinforced construction strengthened by 6mm thick special design, V-formed, vertical solid steel panels distanced between 350-550mm along the blocker width and assembled together with the main chassis for evenly distributed impact absorption. All vertical impact absorption panels have special shape and contain hook type holders (patent pending 2015/12506) for high impact resistance and are installed with equal distance to each other and supported by 4 pieces of 30x10mm solid steel beams to further strengthen the construction.
To stop severe impact loads there is an additional 6mm (optionally 10mm) thick sheet metal attached to the vertical impact absorption panels.At the frontal crash-facing section, there is replaceable 3mm thick steel sheet with rounded form to handle light impacts. Resistance of crash surface consisting of 6mm+3mm sheet metal is equal to resistance of a 74mm thick sheet metal due to it’s construction structured with vertical solid panels and 30x10mm solid bars behind.Top panel where the vehicle pass over is made of 10/11mm thick non-slip surface steel hot-dip galvanised before paint.The system moves up and down with 50mm diameter stainless steel hinges (example: 3 meter blocker contains 7 pieces of 50mm diameter stainless steel hinges).Blocker unit raises 45° angle from the ground level and equipped with built in indicators on side and front panels.A top lid is provided for easy access for service and maintenance on the top plate.
Manuel Control Button Unit:Provided with an IP67 CRM yellow box including 3 switches for downwards, upwards, stop (optional emergency operation), can stop the blocker motion with the command/signal coming from detector, equipped with built-in LED visual indications and 10 mt cable.
Compatibility with Access Control Systems:Can be utilized through, card reader, finger print, biometric systems and similar any kind of access control systems (by third parties)
Optional Unit:With the optional model “RB CONT.UNIT.V.001” users can monitor the diagnostic functions, can be accessed through LAN, RS485 protocols. System is provided inside a metal cabinet that also indudes the other functional switches like downward, upward,stop, emergency operations.With the built in 124x68 LCD screen, all status of the operation and system diagnostic can be monitored through messaging functions like oil status, loop or beam detectors status, water level inside the cabinet, blocker position according to user preference, any .bmp files can be displayed.The system is driven by the PLC.
Traffic lights (red-green), Traffic light Pole, Loop Detector (double/single contact), Beam Detector, 220V or 24V DC motor, Remote Control (receiver and transmitter are 3 channels), UPS, Photocell Sensor (receiver+ transmitter with 50cm height pole), RB CONT. UNIT.V.001 Control Unit, Intercom, External Buttons, Emergency Submersible Pump (9000 lt/h or 18000 It/h), Hydraulic Accumulator for emergency fast raise up (1 piston or 2 pistons systems), Surface Frame (sizes: from 250mm to 1000mm), Oil Cooler, Oil Heater, Heater for electronic components, hot-dip galvanization for cabinet, blocker and impact surface units, double effect hydraulic unit, double speed hydraulic unit, ground mounting plate, powered audio signal (siren), PLC diagnostic monitor, IP67 box (for PLC, SMPS, connectors etc inside power unit).
Easy Installation with C30 grade concrete.
System :
Power Unit :
Blocker Cabinet :(underground unit)
Blocker Unit :(impact blocking unit)
Control System :
Optional Features and :Accessories
Installation :
Impact Absorbing Panel Quan�ty
Blocker Size 1 mt 1,5 mt 2 mt 2,5 mt 3 mt 3,5 mt 4 mt 4,5 mt 5 mt 5,5 mt 6 mt 6,5 mt
Single Piston 4 4 6 6 8 8 10
Double Piston 10 12 12 12 15 18 18
HRB ROAD BLOCKER
*Design and specifications are subject to change without notice.
Strengthened industrial pump,60 lt oil tank capacity with magnetic metal collector and particle filter.Built-in oil level and oil temperature sensor with low oil level warning. 70-80 Bar pressure; maximum running pressure is 120 Bar.10 mt R2 (double wire braided mesh) reinforced hydraulic hose.
RRB 10F60
RRB 15F60
RRB 20F60
RRB 25F60
RRB 30F60
RRB 35F60
RRB 35F60/2p
RRB 40F60
RRB 40F60/2p
RRB 45F60/2p
RRB 50F60/2p
RRB 55F60/2p
RRB 60F60/2p
RRB 65F60/2p
RRB 10F90
RRB 15F90
RRB 20F90
RRB 25F90
RRB 30F90
RRB 35F90
RRB 35F90/2p
RRB 40F90
RRB 40F90/2p
RRB 45F90/2p
RRB 50F90/2p
RRB 55F90/2p
RRB 60F90/2p
RRB 65F90/2p
x = 5,5m Blocker Unit Width, 90-70cm Raising Height (2 pistons)x = 6,0m Blocker Unit Width, 90-70cm Raising Height (2 pistons)x = 6,5m Blocker Unit Width, 90-70cm Raising Height (2 pistons)
x = 5,0m Blocker Unit Width, 90-70cm Raising Height (2 pistons)
x = 1,5m Blocker Unit Width, 90-70cm Raising Heightx = 2,0m Blocker Unit Width, 90-70cm Raising Heightx = 2,5m Blocker Unit Width, 90-70cm Raising Heightx = 3,0m Blocker Unit Width, 90-70cm Raising Heightx = 3,5m Blocker Unit Width, 90-70cm Raising Heightx = 3,5m Blocker Unit Width, 90-70cm Raising Height (2 pistons)x = 4,0m Blocker Unit Width, 90-70cm Raising Height
x = 5,0m Blocker Unit Width, 65-50cm Raising Height (2 pistons)
1275 x 6170 x 975x = 5,5m Blocker Unit Width, 65-50cm Raising Height (2 pistons)
1275 x 6670 x 975x = 6,0m Blocker Unit Width, 65-50cm Raising Height (2 pistons)x = 6,5m Blocker Unit Width, 65-50cm Raising Height (2 pistons)
x = 1,0m Blocker Unit Width, 90-70cm Raising Height
x = 1,0m Blocker Unit Width, 65-50cm Raising Height 1275 x 1170 x 975x = 1,5m Blocker Unit Width, 65-50cm Raising Height 1275 x 1670 x 975x = 2,0m Blocker Unit Width, 65-50cm Raising Height 1275 x 2170x 975x = 2,5m Blocker Unit Width, 65-50cm Raising Height 1275 x 2670 x 975x = 3,0m Blocker Unit Width, 65-50cm Raising Height 1275 x 3170 x 975x = 3,5m Blocker Unit Width, 65-50cm Raising Height 1275 x 3670 x 975
1275 x 3670 x 975x = 3,5m Blocker Unit Width, 65-50cm Raising Height (2 pistons)1275 x 4170 x 9751275 x 4170 x 975
x = 4,0m Blocker Unit Width, 65-50cm Raising Height
1275 x 4670 x 975x = 4,0m Blocker Unit Width, 65-50cm Raising Height (2 pistons)
1275 x 5170 x 975
x = 4,0m Blocker Unit Width, 90-70cm Raising Height (2 pistons)x = 4,5m Blocker Unit Width, 90-70cm Raising Height (2 pistons)
x = 4,5m Blocker Unit Width, 65-50cm Raising Height (2 pistons)
1275 x 5670 x 975
Rais
ing
Hei
ght 6
5-50
cm
Rais
ing
Hei
ght 9
0-70
cm
H = 60 cm / L x W x D (mm)
H = 90 mmH = 90 cm / L x W x D (mm)
1680 x 1170 x 12701680 x 1670 x 12701680 x 2170 x 12701680 x 2670 x 12701680 x 3170 x 12701680 x 3670 x 12701680 x 3670 x 1270
1680 x 6670 x 1270
1680 x 4170 x 12701680 x 4170 x 12701680 x 4670 x 12701680 x 5170 x 12701680 x 5670 x 12701680 x 6170 x 1270
Axle Load Resistance :
Hydraulic Cylinder Unit :
50T
Heavy duty, dust sealed electrostatic powder coated hydraulic cylinder.Models between 1- 4 meter widths contain a single piston.(Double piston versions are optionally available for models3,5 & 4 meter widths).Models between 4,5 - 6,5 meter widths contain double pistons.Cylinder unit features a safety valve against leakage and hose failure.
*Design and specifications are subject to change without notice.
Power :
Control Pack :
Speed :
IP Rating :
Crash / Impact Rating :
Standard 380V 3-Phase 50/60 Hz, 3,3 - 5,5 KvA motor (varies depending on blocker size).Opt. 220v, 110V 1-Phase 50/60 Hz; or 24V DC
24V DC powered and PLC control unit is placed in power unit cabinet.Solenoids 24V DC ( Ops.12V DC / 220V AC)
Standard Operation ~4 - 6 sec. (ascend/descend) (opt. 2,5 - 4 sec.) depending on unit dimensions. Emergency raise up (upwards) by optional hydraulic accumulator ~1,5 sec. and may vary depending on unit dimensions.
IP 55 - Hydraulic Power Unit,IP 58 - Blocker Cabinet (underground unit),IP 67 - Electronics (optional), protection with housing/box,IP 68 - Hydraulic Piston
Designed and produced to withstand M50 P1 (K-12).
RRB ROAD BLOCKER(Reinforced Model)
Hydraulic Power Unit :
Down, Up, Emergency and external sensor inputs/outputs (e.g. Loop Detector, Beam Detector, Signalization, Remote Control, etc.). System alerts with an audio signal during lowering and raising operation.A loud siren output in case of alarm or emergency.Can be lowered or raised automatically in case of emergency (User’s preference).Can be lowered and raised manually in case of power failure or during the maintenance service with manual pump and manual valve feature. Automatic raise up mode deploys (optionally with synchronized loop detector) the road blocker after the vehicle has passed over.Sensor controlled stopping both at the top and bottom positions of the blocker unit
Motor, hydraulic pump and solenoid valves are contained in an easily accessible hot-dip-galvanized and electrostatic powder painted cabinet with a built-in lock lid. (Opt. Stainless Steel Cabinet)Cabinet Dimensions: 1000 mm x 570 mm x 1200 mm (W x L x H).
All parts are colored with industrial paint with two components.U-shaped profile structure for maximum strength.The blocker and cabinet are designed so that no vehicle crashing effect can displace it after embedded or installed in to the ground.
All parts are colored with industrial paint with two components.Hop dip galvanised vehicle pass through surface (top plates).The construction is aesthetically and functionally completed with reflecting strips and warning signs.The hinge system is specially designed to have a flattened surface level with the top plate so that vehicles can pass over smoothly and quietly. With the help of hidden hinge system feature during the upward/downward running operation the gap at the blocker top plate back-edge and cabinet housing stays at 2mm maximum providing a critically important safety feature during operation of the road blocker.The blocker unit is made of a reinforced construction strengthened by 6mm thick special design, vertical solid steel panels distanced between 350-550mm along the blocker width and assembled together with the main chassis for evenly distributed impact absorption. All vertical impact absorption panels have special shape and contain hook type holders (patent pending 2015/12506) for high impact resistance and are installed with equal distance to each other and supported by 4 pieces of 30x10mm solid steel beams to further strengthen the construction.
To stop severe impact loads there is an additional 6mm thick sheet metal attached to the vertical impact absorption panels.Top panel where the vehicle pass over is made of 8/9mm thick non-slip surface steel hot-dip galvanised before paint.The system moves up and down with 50mm diameter stainless steel hinges (example: 3 meter blocker contains 7 pieces of 50mm diameter stainless steel hinges).Blocker unit raises 45° angle from the ground level and can be equipped with equipped with optional flashing light indicators on side and front panels.A top lid is provided for easy access for service and maintenance on the top plate.
Manuel Control Button Unit:Provided with an IP67 CRM yellow box including 3 switches for downwards, upwards, stop (optional emergency operation), can stop the blocker motion with the command/signal coming from detector, equipped with built-in LED visual indications.
Compatibility with Access Control Systems:Can be utilized through, card reader, finger print, biometric systems and similar any kind of access control systems (by third parties).
Optional Unit:With the optional model “RB CONT.UNIT.V.001” users can monitor the diagnostic functions, can be accessed through LAN, RS485 protocols. System is provided inside a metal cabinet that also indudes the other functional switches like downward, upward,stop, emergency operations.With the built in 124x68 LCD screen, all status of the operation and system diagnostic can be monitored through messaging functions like oil status, loop or beam detectors status, water level inside the cabinet, blocker position according to user preference, any .bmp files can be displayed. The system is driven by the PLC.
Traffic lights (red-green), Traffic light Pole, Loop Detector (double/single contact), Beam Detector, 220V or 24V DC motor, Remote Control (receiver and transmitter are 3 channels), UPS, Photocell Sensor (receiver+ transmitter with 50cm height pole), RB CONT. UNIT.V.001 Control Unit, Intercom, External Buttons, Emergency Submersible Pump (9000 lt/h or 18000 It/h), Hydraulic Accumulator for emergency fast raise up (1 piston or 2 pistons systems), Surface Frame (sizes: from 250mm to 1000mm), Oil Cooler, Oil Heater, Heater for electronic components, hot-dip galvanization for cabinet, blocker and impact surface units, double effect hydraulic unit, double speed hydraulic unit, ground mounting plate, powered audio signal (siren), PLC diagnostic monitor, flashing light indicators, round shaped front panel, oil level sensor, optional speed, IP67 box (for PLC, SMPS, connectors etc inside power unit).
Easy Installation with C30 grade concrete.
System :
Power Unit :
Blocker Cabinet :(underground unit)
Blocker Unit :(impact blocking unit)
Control System :
Optional Features and :Accessories
Installation :
RRB ROAD BLOCKER
*Design and specifications are subject to change without notice.
Impact Absorbing Panel Quan�ty
Blocker Size 1 mt 1,5 mt 2 mt 2,5 mt 3 mt 3,5 mt 4 mt 4,5 mt 5 mt 5,5 mt 6 mt 6,5 mt
Single Piston 4 4 6 6 8 8 10
Double Piston 10 12 12 12 15 18 18
Strengthened industrial pump,60 lt oil tank capacity with magnetic metal collector and particle filter.Built-in oil level and temperature indicator, 70-80 Bar pressure; maximum running pressure is 120 Bar10 mt R2 (double wire braided mesh) reinforced hydraulic hose.
RB ROAD BLOCKER(Residential Model)
Power :
Control Pack :
Speed :
IP Rating :
Crash / Impact Rating :
Standard 380V 3-Phase 50/60 Hz, 3,3 - 5,5 KvA motor (varies depending on blocker size).Opt. 220V, 110V 1-Phase 50/60 Hz; or 24V DC
24V DC powered and PLC control unit is placed in power unit cabinet. Solenoids 24V DC (Ops.12V DC / 220V AC)
Standard Operation ~4 - 6 sec. (ascend/descend) (opt. 2,5 - 4 sec.) depending on unit dimensions. Emergency raise up (upwards) by optional hydraulic accumulator ~1,5 sec. and may vary depending on unit dimensions.
IP 55 - Hydraulic Power Unit,IP 58 - Blocker Cabinet (underground unit),IP 67 - Electronics (optional), protection with housing/box,IP 68 - Hydraulic Piston
Designed and produced to withstand M40 P1 (K-8).
RB 10F60
RB 15F60
RB 20F60
RB 25F60
RB 30F60
RB 35F60
RB 40F60
RB 40F60/2p
RB 45F60/2p
RB 50F60/2p
RB 55F60/2p
RB 60F60/2p
RB 65F60/2p
RB 10F90
RB 15F90
RB 20F90
RB 25F90
RB 30F90
RB 35F90
RB 40F90
RB 40F90/2p
RB 45F90/2p
RB 50F90/2p
RB 55F90/2p
RB 60F90/2p
RB 65F90/2p
x = 5,5m Blocker Unit Width, 90-70cm Raising Height (2 pistons)x = 6,0m Blocker Unit Width, 90-70cm Raising Height (2 pistons)x = 6,5m Blocker Unit Width, 90-70cm Raising Height (2 pistons)
x = 5,0m Blocker Unit Width, 90-70cm Raising Height (2 pistons)
x = 1,5m Blocker Unit Width, 90-70cm Raising Heightx = 2,0m Blocker Unit Width, 90-70cm Raising Heightx = 2,5m Blocker Unit Width, 90-70cm Raising Heightx = 3,0m Blocker Unit Width, 90-70cm Raising Heightx = 3,5m Blocker Unit Width, 90-70cm Raising Heightx = 4,0m Blocker Unit Width, 90-70cm Raising Height
x = 5,0m Blocker Unit Width, 65-50cm Raising Height (2 pistons)
1275 x 6170 x 975x = 5,5m Blocker Unit Width, 65-50cm Raising Height (2 pistons)
1275 x 6670 x 975x = 6,0m Blocker Unit Width, 65-50cm Raising Height (2 pistons)x = 6,5m Blocker Unit Width, 65-50cm Raising Height (2 pistons)
x = 1,0m Blocker Unit Width, 90-70cm Raising Height
x = 1,0m Blocker Unit Width, 65-50cm Raising Height 1275 x 1170 x 975x = 1,5m Blocker Unit Width, 65-50cm Raising Height 1275 x 1670 x 975x = 2,0m Blocker Unit Width, 65-50cm Raising Height 1275 x 2170x 975x = 2,5m Blocker Unit Width, 65-50cm Raising Height 1275 x 2670 x 975x = 3,0m Blocker Unit Width, 65-50cm Raising Height 1275 x 3170 x 975x = 3,5m Blocker Unit Width, 65-50cm Raising Height 1275 x 3670 x 975
1275 x 4170 x 9751275 x 4170 x 975
x = 4,0m Blocker Unit Width, 65-50cm Raising Height
1275 x 4670 x 975x = 4,0m Blocker Unit Width, 65-50cm Raising Height (2 pistons)
1275 x 5170 x 975
x = 4,0m Blocker Unit Width, 90-70cm Raising Height (2 pistons)x = 4,5m Blocker Unit Width, 90-70cm Raising Height (2 pistons)
x = 4,5m Blocker Unit Width, 65-50cm Raising Height (2 pistons)
1275 x 5670 x 975
1680 x 6670 x 1270
1680 x 1170 x 12701680 x 1670 x 12701680 x 2170x 12701680 x 2670 x 12701680 x 3170 x 12701680 x 3670 x 12701680 x 4170 x 12701680 x 4170 x 12701680 x 4670 x 12701680 x 5170 x 12701680 x 5670 x 12701680 x 6170 x 1270
Rais
ing
Hei
ght 6
5-50
cm
Rais
ing
Hei
ght 9
0-70
cm
H = 60 cm / L x W x D (mm)
H = 90 mmH = 90 cm / L x W x D (mm)
Axle Load Resistance :
Hydraulic Cylinder Unit :
40T
Heavy duty, dust sealed electrostatic powder coated hydraulic cylinder.Models between 1- 4 meter widths contain a single piston.(Double piston versions are optionally available for models in 4 meter widths).Models between 4,5 - 6,5 meter widths contain double pistons.Cylinder unit features a safety valve against leakage and hose failure.
*Design and specifications are subject to change without notice.
Hydraulic Power Unit : Strengthened industrial pump,60 lt oil tank capacity with magnetic metal collector and particle filter,Built-in oil level and temperature indicator, 70-80 Bar pressure; maximum running pressure is 120 Bar10 mt R2 (double wire braided mesh) reinforced hydraulic hose.
Down, Up, Emergency and external sensor inputs/outputs (e.g. Loop Detector, Beam Detector, Signalization, Remote Control, etc.). System alerts with an audio signal during lowering and raising operation.A loud siren output in case of alarm or emergency.Can be lowered or raised automatically in case of emergency (User’s preference).Can be lowered and raised manually in case of power failure or during the maintenance service with manual pump and manual valve feature. Automatic raise up mode deploys (optionally with synchronized loop detector) the road blocker after the vehicle has passed over.Sensor controlled stopping both at the top and bottom positions of the blocker unit
Motor, hydraulic pump and solenoid valves are contained in an easily accessible hot-dip-galvanized and electrostatic powder painted cabinet with a built-in lock lid. (Opt. Stainless Steel Cabinet) Cabinet Dimensions: 1000 mm x 570 mm x 1200 mm (W x L x H).
All parts are colored with industrial paint with two components.U-shaped profile structure for maximum strength.The blocker and cabinet are designed so that no vehicle crashing effect can displace it after embedded or installed in to the ground.
All parts are colored with industrial paint with two components.Hop dip galvanised vehicle pass through surface (top plates).The construction is aesthetically and functionally completed with reflecting strips and warning signs.The hinge system is specially designed to have a flattened surface level with the top plate so that vehicles can pass over smoothly and quietly. Top panel where the vehicle pass over is made of 8/9mm thick non-slip surface steel hot-dip galvanised before paint.The system moves up and down with 50mm diameter stainless steel hinges (example: 3 meter blocker contains 7 pieces of 50mm diameter stainless steel hinges).Blocker unit raises 45° angle from the ground level and can be equipped with equipped with optional flashing light indicators on side and front panels.A top lid is provided for easy access for service and maintenance on the top plate.
Manuel Control Button Unit:Provided with an IP67 CRM yellow box including 3 switches for downwards, upwards, stop (optional emergency operation), can stop the blocker motion with the command/signal coming from detector, equipped with built-in LED visual indications.
Compatibility with Access Control Systems:Can be utilized through, card reader, finger print, biometric systems and similar any kind of access control systems (by third parties).
Optional Unit:With the optional model “RB CONT.UNIT.V.001” users can monitor the diagnostic functions, can be accessed through LAN, RS485 protocols. System is provided inside a metal cabinet that also indudes the other functional switches like downward, upward,stop, emergency operations.With the built in 124x68 LCD screen, all status of the operation and system diagnostic can be monitored through messaging functions like oil status, loop or beam detectors status, water level inside the cabinet, blocker position according to user preference, any .bmp files can be displayed. The system is driven by the PLC.
Traffic lights (red-green), Traffic light Pole, Loop Detector (double/single contact), Beam Detector, 220V or 24V DC motor, Remote Control (receiver and transmitter are 3 channels), UPS, Photocell Sensor (receiver+ transmitter with 50cm height pole), RB CONT. UNIT.V.001 Control Unit, Intercom, External Buttons, Emergency Submersible Pump (9000 lt/h or 18000 It/h), Hydraulic Accumulator for emergency fast raise up (1 piston or 2 pistons systems), Surface Frame (sizes: from 250mm to 1000mm), Oil Cooler, Oil Heater, Heater for electronic components, hot-dip galvanization for cabinet, blocker and impact surface units, double effect hydraulic unit, double speed hydraulic unit, ground mounting plate, powered audio signal (siren), PLC diagnostic monitor, flashing light indicators, round shaped front panel, oil level sensor, optional speed, IP67 box (for PLC, SMPS, connectors etc inside power unit).
Easy Installation with C30 grade concrete.
System :
Power Unit :
Blocker Cabinet :(underground unit)
Blocker Unit :(impact blocking unit)
Control System :
Optional Features and :Accessories
Installation :
RB ROAD BLOCKER
*Design and specifications are subject to change without notice.
RB ROAD BLOCKER(Surface Mount)
Power :
Control Pack :
Speed :
IP Rating :
Crash / Impact Rating :
Axle Load Resistance :
Hydraulic Cylinder Unit :
Hydraulic Power Unit :
50T
Heavy duty, dust sealed electrostatic powder coated 50 mm hydraulic cylinder.Models between 1- 4 meter widths contain a single piston.(Double piston versions are optionally available for models 3,5 & 4 meter widths).Models between 4,5 - 6,5 meter widths contain double pistons.Cylinder unit features a safety valve against leakage and hose failure.
Strengthened industrial pump,60 lt oil tank capacity with magnetic metal collector and particle filter.Built-in oil level and oil temperature indicator.70-80 Bar pressure; maximum running pressure is 120 Bar.10 mt R2 (double wire braided mesh) reinforced hydraulic hose.
*Design and specifications are subject to change without notice.
Dimensions are given for RB 20 P 60 SRF
Standard 380V 3-Phase 50/60 Hz, 3,3 - 5,5 KvA motor (varies depending on blocker size).Opt. 220V, 110V 1-Phase 50/60 Hz; or 24V DC
24V DC powered and PLC control unit is placed in power unit cabinet.Solenoids 24V DC (Ops.12V DC / 220V AC)
Standard Operation ~2,5 - 6 sec. (ascend/descend) depending on unit dimensions. Emergency raise up (upwards) by optional hydraulic accumulator ~1,5 sec. and may vary depending on unit dimensions.
IP 55 - Hydraulic Power Unit,IP 58 - Blocker Cabinet (underground unit),IP 67 - Electronics (optional), protection with housing/box,IP 68 - Hydraulic Piston
Designed and produced to withstand impacts at M40 (K8) level as per ASTM 2656-07.
Down, Up, Emergency and external sensor inputs/outputs (e.g. Loop Detector, Beam Detector, Signalization, Remote Control, etc.). System alerts with an audio signal during lowering and raising operation.A loud siren output in case of alarm or emergency.Can be lowered or raised automatically in case of emergency (User’s preference).Can be lowered and raised manually in case of power failure or during the maintenance service with manual pump and manual valve feature. Automatic raise up mode deploys (optionally with synchronized loop detector) the road blocker after the vehicle has passed over).Sensor controlled stopping both at the top and bottom positions of the blocker unit
Motor, hydraulic pump and solenoid valves are contained in an easily accessible hot-dip-galvanized and electrostatic powder painted cabinet with a built-in lock lid. (Opt. Stainless Steel Cabinet)
All parts are colored with industrial paint with two components.U-shaped profile structure for maximum strength.The blocker and cabinet are designed so that no vehicle crashing effect can displace it after embedded or installed in to the ground.
All parts are colored with industrial paint with two components.Hop dip galvanised vehicle pass through surface (top plates).The hinge system is specially designed to have a flattened surface level with the top plate so that vehicles can pass over smoothly and quietly. With the help of hidden hinge system feature during the upward/downward running operation the gap at the blocker top plate back-edge and cabinet housing stays at 2mm maximum providing a critically important safety feature during operation of the road blocker.Top panel where the vehicle pass over is made of 8/9mm thick non-slip surface steel hot-dip galvanised before paint.The system moves up and down with 50mm diameter stainless steel hinges (example: 3 meter blocker contains 7 pieces of 50mm diameter stainless steel hinges).Blocker unit raises 25° angle from the ground level.A top lid is provided for easy access for service and maintenance on the top plate.
Manuel Control Button Unit:Provided with an IP67 CRM yellow box including 3 switches for downwards, upwards, stop (optional emergency operation), can stop the blocker motion with the command/signal coming from detector, equipped with built-in LED visual indications and 10 mt cable.
Compatibility with Access Control Systems:Can be utilized through, card reader, finger print, biometric systems and similar any kind of access control systems (by third parties)
Optional Unit:With the optional model “RB CONT.UNIT.V.001” users can monitor the diagnostic functions, can be accessed through LAN, RS485 protocols. System is provided inside a metal cabinet that also indudes the other functional switches like downward, upward,stop, emergency operations.With the built in 124x68 LCD screen, all status of the operation and system diagnostic can be monitored through messaging functions like oil status, loop or beam detectors status, water level inside the cabinet, blocker position according to user preference, any .bmp files can be displayed.The system is driven by the PLC.
Traffic lights (red-green), Traffic light Pole, Loop Detector (double/single contact), Beam Detector, 220V or 24V DC motor, Remote Control (receiver and transmitter are 3 channels), UPS, Photocell Sensor (receiver+ transmitter with 50cm height pole), RB CONT. UNIT.V.001 Control Unit, Intercom, External Buttons, Hydraulic Accumulator for emergency fast raise up (1 piston or 2 pistons systems), Surface Frame (sizes: from 250mm to 1000mm), Oil Cooler, Oil Heater, Heater for electronic components, hot-dip galvanization for cabinet, blocker and impact surface units, double effect hydraulic unit, double speed hydraulic unit, powered audio signal (siren), PLC diagnostic monitor, IP67 box (for PLC, SMPS, connectors etc inside power unit).LED indicator on front oil level sensor.
Easy Installation with C30 grade concrete.
System :
Power Unit :
Blocker Cabinet :(underground unit)
Blocker Unit :(impact blocking unit)
Control System :
Optional Features and :Accessories
Installation :
RB ROAD BLOCKER (Surface Mount)
*Design and specifications are subject to change without notice.
Stan
dard
Fea
ture
s an
d Bu
ilt-in
Pro
pert
ies
Gen
eral
Tec
hnic
al S
peci
�cat
ions
(em
bedd
ed s
erie
s)
Axl
e Lo
ad50
T.
50 T
.40
T.
Pane
l Thi
ckne
sses
Solid
6 m
m (a
t eve
ry 3
5-55
cm
)So
lid 6
mm
(at
eve
ry 3
5-55
cm
)So
lid 4
mm
pan
els
Flas
hing
Lig
htSt
anda
rdO
ptio
nal
Opt
iona
lRo
und
Fron
t Pan
elSt
anda
rdO
ptio
nal
Opt
iona
lTo
p Pl
ate
10/1
1 m
m8/
9 m
m8/
9 m
mO
il Le
vel S
enso
rSt
anda
rdO
ptio
nal
Opt
iona
lIm
pact
Res
ista
nce
(Cra
sh T
est)
M50
P1
(K-1
2) te
sted
& c
erti�
ed (H
RB 3
0 R
90).
Des
igne
d an
d pr
oduc
ed to
with
stan
d H
30.
Des
igne
d an
d pr
oduc
ed to
with
stan
dM
50 P
1 (K
-12)
.D
esig
ned
and
prod
uced
to w
ithst
and
M40
P1
(K-8
).
Fron
t Pan
el T
hick
ness
30+
6 (o
pt. 1
0)+3
mm
30+
6mm
4 (m
m)
Spee
d2,
5 / 6
sn4
/ 6 sn
(Opt
. 2,5
/ 4
sn)
4 / 6
sn (O
pt. 2
,5 /
4 sn
)
HRB
(Hea
vy D
uty
Road
Blo
cker
)RR
B(R
einf
orce
d Ro
ad B
lock
er)
RB(R
esid
enti
al T
ype
Road
Blo
cker
)
Out
puts
(sire
n, li
ght,
beam
, �as
hes)
.
Road
Blo
cker
s
380V
3-P
hase
AC.
IP 6
7 m
anua
l con
trol
but
ton
unit
3 fu
nctio
ns.
Emer
genc
y bu
tton
.D
own/
desc
end
butt
on (m
anua
l) in
cas
e of
pow
er o
� or
mai
nten
ance
. P
LC c
ontr
ol u
nit.
24 V
DC
cont
rol.
24 V
DC
sole
noid
s.A
utom
atic
/man
ual p
rogr
amm
able
acc
ess
auth
oris
atio
n.
Mov
emen
t buz
zer.
Spec
ial d
esig
n hi
nge
stru
ctur
e sp
read
on
the
tota
l wid
th o
f the
blo
cker
with
out g
ap.
Unl
aden
pis
ton
conn
ectio
n at
top
and
bott
om p
ositi
ons
of th
e bl
ocke
r ena
blin
g fr
ee-s
tand
ing
of th
e pi
ston
Gal
vani
sed
shee
t met
al m
ain
body
sid
e co
vers
.H
ot d
ip g
alva
nize
d ve
hicl
e pa
ss th
roug
h su
rfac
e (t
op p
late
s)
IP 5
5 - H
ydra
ulic
Pow
er U
nit,
IP 5
8 - B
lock
er C
abin
et (u
nder
grou
nd u
nit)
, IP
68 -
Hyd
raul
ic P
isto
n60
lt o
il ta
nk.
Gro
und
mou
ntin
g ap
para
tus.
Hos
e fo
r Hyd
raul
ic O
il (1
0mt)
25 c
c ha
nd p
ump
(man
ual).
Oil
leve
l and
tem
pera
ture
indi
cato
r.Pr
otec
tive
valv
e fo
r oil
hose
.O
il ta
nk w
ith p
artic
ule
�lte
r.O
il ta
nk w
ith m
agne
tic m
etal
col
lect
or.
Hot
dip
gal
vani
sed
pow
er &
con
trol
uni
t cab
in
-5°C
/ +5
5°C
(Opt
. -30
°C /
+70°
C)
Easy
inst
alla
tion.
Dou
ble
e�ec
t hyd
raul
ic m
ovem
ent.
Solid
impa
ct a
bsor
btio
n pa
nels
.M
axim
um re
info
rced
sta
tic c
onst
ruct
ion
cabi
n.Se
rvic
e ac
cess
lid
(scr
ewed
).Re
info
rced
indu
stria
l pai
nt w
ith tw
o co
mpo
nent
s in
yel
low
and
bla
ck c
olor
s.H
igh
visi
bilit
y w
ith y
ello
w a
nd b
lack
dia
gona
l str
ipes
on
impa
ct s
urfa
ce.
Re�e
ctiv
e m
arki
ng.
PLC
diag
nost
ic m
onito
r (LA
N).
Hot
dip
gal
vani
satio
n bo
th fo
r cab
inet
and
blo
cker
uni
tH
ot d
ip g
alva
nisa
tion
for i
mpa
ct s
urfa
ce
Gro
und
mou
ntin
g pl
ate.
Dou
ble
spee
d.O
ptio
nal s
peed
s for
RRB
and
RB.
Acc
umul
ator
for e
mer
genc
y fa
st ra
ise
up (a
pp.1
,5sn
spee
d).
Tra�
c lig
hts (
red-
gree
n).
Tra�
c lig
hts
(red
-gre
en),
dia:
100m
m o
r 200
mm
Loop
ded
ecto
r.Be
am d
edec
tor.
Phot
ocel
l.Re
mot
e co
ntro
l (w
irele
ss).
Rain
wat
er d
rain
age
pum
p (e
mer
genc
y su
bmer
sibl
e pu
mp)
.Ro
unde
d fr
ont p
anel
(rec
omm
ende
d fo
r res
iden
tial u
se fo
r saf
ety)
.
Surf
ace
fram
es in
opt
iona
l siz
es (2
5cm
to 1
00cm
).IP
67
cont
rol b
ox (f
or P
LC, S
MPS
, con
nect
ors,
circ
uit b
reak
ers,
loop
det
ecto
r (if
any)
, rel
ays)
.
Oil
leve
l sen
sor.
1 ph
ase
220
V A
C or
24
V D
C M
otor
.U
PS.
Oil
cool
er.
Oil
heat
er.
Com
pone
nt h
eate
r.
Aud
io S
igna
l (Si
ren,
pow
ered
).
Opt
iona
l Fea
ture
s
BO
LLA
RD
M40 Installation
M50 Installation
HBDHEAVY DUTY BOLLARD
Power :
Control Pack :
Speed :
IP Rating :
Crash / Impact Rating :
Axle Load Resistance :
Hydraulic Cylinder Unit :
Hydraulic Power Unit :
System :
Power Unit :
Underground Structure :
Standard 380V 3-Phase 50/60 Hz, 2,2-5,5 kW motor (depending on the number of bollards in the set to be fed).Opt. 220V, 110V 1-Phase 50/60 Hz; or 24V DC
24V DC powered and PLC control unit is placed in power unit cabinet. Solenoids 24V DC (Ops.12V DC / 220V AC)
Standard Operation ~2.5 - 5 sec. (ascend/descend) (depending on the number of bollards in the set to be fed).Emergency raise up (upwards) by optional hydraulic accumulator ~1,5 sec. IP 55 - Hydraulic Power Unit,IP 58 - Underground Structure,IP 67 - Electronics (optional), protection with housing/box,IP 68 - Hydraulic Piston M50 (K-12) & M40 (K-8) crash tested and certified according to ASTM 2656-07 (HBD 275 H 90 only).
70T
Heavy duty, double acting, electrostatic powder coated, dust sealed hydraulic cylinder.
Strengthened industrial pump,45-60 lt (depending on the number of bollards in the set to be fed) oil tank capacity with magnetic metal collector and particle filter.Built-in oil level and oil temperature indicators and oil level sensor with low oil level warning.30-80 Bar (depending on the number of bollards in the set to be fed) pressure;10mt R2 (double wire braided mesh) reinforced hydraulic hose. Interconnecting hoses for multiple bollard installations will be supplied.
Down, Up, Emergency and external sensor inputs/outputs (e.g. Loop Detector, Beam Detector, Signalization, Remote Control, etc.). System alerts with an audio signal during lowering and raising operation. A loud siren output in case of alarm or emergency. Can be lowered or raised automatically in case of emergency (user’s preference, optional at no cost), programmed to stop as standard. Can be lowered and raised manually in case of power failure or during the maintenance service with manual pump and manual discharge feature. Automatic raise up mode deploys (optionally with synchronized loop detector) the bollard after the vehicle has passed over. Motor, hydraulic pump and solenoid valves are contained in an easily accessible hot-dip-galvanized and electrostatic powder painted cabinet with a built-in lock lid. (Opt. Stainless Steel Cabinet)Cabinet Dimensions: 1000 mm x 570 mm x 1200 mm (W x L x H).
Bollard Anchorage Casing:Ø338 / 420 mm steel casing hot dip galvanized and structured for maximum strength. Casing is designed so that no vehicle crashing effect can displace it after embedded or installed into the ground. Ground assembly is supported with bars. Hydraulic hose and cable entry openings enabling to use either of the three directions as per hyraulic power unit position and site conditons. Designed for easy access to hydraulic hose and cable connections. Ground mounting plate with installation holes for bolt type easy ground fixing. Includes cut-out for connection of submersible pump for rainwater drainage.
Main Housing: Ø324 / 406 mm hot dip galvanised steel, structured to provide main housing for the bollard cylinder. Bollard cylinder pivoted with and moves through replaceable 5 rails (inner railing) made of special non-metal and positioned with equal distances from eachother for maximum rigidity and minimum material fraction. Contains the hydraulic cylinder lower connection. Thanks to the bollard anchorage casing, the main housing can be easily replaceable together with the bollard cylinder in case of a damage in any kind.
*Design and specifications are subject to change without notice.
Bollard Cylinder (impact blocking unit): Ø270 and 324mm hot-dip galvanised steel with 10mm wall thickness and eccentrically 65-90mm solid steel and composite impact surface , colored with electrostatic powder coating in RAL9006 as standard (other RAL colors are optionally available). Demountable bollard top plate made of aluminium with 360° visible red flashing LED indicators. Furnished with red, white or yellow reflecting strips compliant to “E” standard. Special star-formed, vertical 10 mm solid steel infills for evenly distributed impact absorption. Bollard cylinder pivoted with and moves through replaceable 5 rails (outer railing) made of special non-metal and positioned with equal distances from eachother for maximum rigidity and minimum material fraction. Contains the hydraulic cylinder upper connection.
Road Surface Plate: 15 mm steel hot-dip galvanised, colored with elctrostatic powder coating in RAL9006 (other RAL colors are optionally available). Easy disassembly by its bolt type connection. Dust sealant / wiper seal.
Manual Control Button Unit: Provided with an IP67 CRM yellow box and 10mt cable including 3 switches for downwards, upwards, stop (optional emergency operation), equipped with built-in LED visual indications.
Compatibility with Access Control Systems:Can be utilized through, card reader, finger print, biometric systems and similar any kind of access control systems (by third parties). Traffic Lights (red-green), Traffic Light Pole, Loop Detector (double/single antenna), Beam Detector, 220V or 24V DC Motor, Remote Control (receiver and transmitter are 3 channels), UPS, Photocell Sensor (receiver+ transmitter with 50cm height pole), RB CONT. UNIT.V.001 Control Unit, Intercom, External Buttons, Emergency Submersible Pump, Hydraulic Accumulator for Emergency Fast Raise-up, Oil Cooler, Oil Heater, Heater for Electronic Components, Powered Audio Signal (siren),PLC Diagnostic Monitor, IP67 box (for PLC, SMPS, connectors etc inside power unit).
Easy Installation with C30 grade concrete. Possible to install multiple units. In case of multiple unit installation, 1200mm gap between the bollards is recommended for M40 certified installations. For M50 certified installations; minimum 2 bollards shall be installed keeping the gap between bollards at 800mm.
Above Ground Structure :
Control System :
Optional Features :and Accessories
Installation :
HBD BOLLARD
*Design and specifications are subject to change without notice.
Power Unit :
Underground Structure :
RBDREINFORCED BOLLARD
Power :
Control Pack :
Speed :
IP Rating :
Crash / Impact Rating :
Axle Load Resistance :
Hydraulic Cylinder Unit :
Hydraulic Power Unit :
System :
Standard 380V 3-Phase 50/60 Hz, 2,2-5,5 kW motor (depending on the number of bollards in the set to be fed).Opt. 220V, 110V 1-Phase 50/60 Hz; or 24V DC
24V DC powered and PLC control unit is placed in power unit cabinet. Solenoids 24V DC (Ops.12V DC / 220V AC)
Standard Operation ~2.5 -5 sec. (ascend/descend) (depending on the number of bollards in the set to be fed). Emergency raise up (upwards) by optional hydraulic accumulator ~1,5 sec.
IP 55 - Hydraulic Power Unit,IP 58 - Underground Structure,IP 67 - Electronics (optional), protection with housing/box,IP 68 - Hydraulic Piston Designed and produced to stop a vehicle weighing 6800 kg and travelling with 30 miles/hour according to ASTM 2656-07 standard at M30 (K-4) level.
50T
Heavy duty, double acting electrostatic powder coated, dust sealed hydraulic cylinder.
Strengthened industrial pump, 45-60 lt (depending on the number of bollards in the set to be fed) oil tank capacity with magnetic metal collector and particle filter. Built-in oil level and oil temperature indicators with low oil level warning. 30-80 Bar (depending on the number of bollards in the set to be fed) pressure; 10mt R2 (double wire braided mesh) reinforced hydraulic hose. Interconnecting hoses for multiple bollard installations will be supplied.
Down, Up, Emergency and external sensor inputs/outputs (e.g. Loop Detector, Beam Detector, Signalization, Remote Control, etc.). System alerts with an audio signal during lowering and raising operation.A loud siren output in case of alarm or emergency.
Can be lowered or raised automatically in case of emergency (user’s preference, optional at no cost), programmed to stop as standard.Can be lowered and raised manually in case of power failure or during the maintenance service with manual pump and manual discharge feature.Automatic raise up mode deploys (optionally with synchronized loop detector) the bollard after the vehicle has passed over.
Motor, hydraulic pump and solenoid valves are contained in an easily accessible hot-dip-galvanized and electrostatic powder painted cabinet with a built-in lock lid. (Opt. Stainless Steel Cabinet) Cabinet Dimensions: 1000 mm x 570 mm x 1200 mm (W x L x H).
Bollard Anchorage Casing:Ø338 / 420 mm steel casing hot dip galvanized and structured for maximum strength.Casing is designed so that no vehicle crashing effect can displace it after embedded installed into the ground. Ground assembly is supported with bars.Hydraulic hose and cable entry openings enabling to use either of the three directions as per hyraulic power unit position and site conditons. Designed for easy access to hydraulic hose and cable connections. Ground mounting plate with installation holes for bolt type easy ground fixing. Includes cut-out for connection of submersible pump for rainwater drainage. Main Housing:Ø324 / 406 mm hot dip galvanised steel, structured to provide main housing for the bollard cylinder. Bollard cylinder pivoted with and moves through replaceable 5 rails (inner railing) made of special non-metal and positioned with equal distances from eachother for maximum rigidity and minimum material fraction. Contains the hydraulic cylinder lower connection. Thanks to the bollard anchorage casing, the main housing can be easily replaceable together with the bollard cylinder in case of a damage in any kind.
*Design and specifications are subject to change without notice.
Bollard Cylinder (impact blocking unit) :Ø270 and 324mm hot-dip galvanised steel with 10mm wall thickness and eccentrically 65-90mm solid steel and composite impact surface , colored with electrostatic powder coating in RAL9006 as standard (other RAL colors are optionally available).
Demountable bollard top plate made of aluminium with 360° visible red flashing LED indicators. Furnished with red, white or yellow reflecting strips compliant to “E” standard. Special star-formed, vertical 5 mm solid steel infills for evenly distributed impact absorption. Bollard cylinder pivoted with and moves through replaceable 5 rails (outer railing) made of special non-metal and positioned with equal distances from eachother for maximum rigidity and minimum material fraction. Contains the hydraulic cylinder upper connection. Road Surface Plate: 15 mm steel hot-dip galvanised, colored with elctrostatic powder coating in RAL9006 (other RAL colors are optionally available). Easy disassembly by its bolt type connection. Dust sealant / wiper seal.
Manual Control Button Unit: Provided with an IP67 CRM yellow box and 10mt cable including 3 switches for downwards, upwards, stop (optional emergency operation), equipped with built-in LED visual indications.
Compatibility with Access Control Systems:Can be utilized through, card reader, finger print, biometric systems and similar any kind of access control systems (by third parties).
Traffic Lights (red-green), Traffic Light Pole, Loop Detector (double/single antenna), Beam Detector, 220V or 24V DC Motor, Remote Control (receiver and transmitter are 3 channels), UPS, Photocell Sensor (receiver+ transmitter with 50cm height pole), RB CONT. UNIT.V.001 Control Unit, Intercom, External Buttons, Emergency Submersible Pump, Hydraulic Accumulator for Emergency Fast Raise-up, Oil Cooler, Oil Heater, Heater for Electronic Components, Powered Audio Signal (siren), PLC Diagnostic Monitor, IP67 box (for PLC, SMPS, connectors etc inside power unit), oil level sensor. Easy Installation with C30 grade concrete. Possible to install multiple units. In case of multiple unit installation, 1200mm gap between the bollards is recommended.
Above Ground Structure :
Control System :
Optional Features :and Accessories
Installation :
RBD BOLLARD
*Design and specifications are subject to change without notice.
TBDTRAFFIC BOLLARD
Power :
Control Pack :
Speed :
IP Rating :
Crash / Impact Rating :
Axle Load Resistance :
Hydraulic Cylinder Unit :
Hydraulic Power Unit :
System :
Power Unit :
Underground Structure :
Standard 380V 3-Phase 50/60 Hz, 2,2-5,5 kW motor (depending on the number of bollards in the set to be fed).Opt. 220V, 110V 1-Phase 50/60 Hz; or 24V DC
24V DC powered and PLC control unit placed in power unit cabinet. Solenoids 24V DC (Ops.12V DC / 220V AC)
Standard Operation ~1,8 - 4 sec. (ascend/descend) (depending on the number of bollards in the set to be fed).Emergency raise up (upwards) by optional hydraulic accumulator ~1,5 sec. IP 55 - Hydraulic Power Unit,IP 58 - Underground Structure,IP 67 - Electronics (optional), protection with housing/box,IP 68 - Hydraulic Piston
-
50T
Heavy duty, double acting electrostatic powder coated, dust sealed hydraulic cylinder.
Strengthened industrial pump, 45-60 lt (depending on the number of bollards in the set to be fed) oil tank capacity with magnetic metal collector and particle filter. Built-in oil level and oil temperature indicators with low oil level warning. 30-80 Bar (depending on the number of bollards in the set to be fed) pressure; 10mt R2 (double wire braided mesh) reinforced hydraulic hose. Interconnecting hoses for multiple bollard installations will be supplied.
Down, Up, Emergency and external sensor inputs/outputs (e.g. Loop Detector, Beam Detector, Signalization, Remote Control, etc.). System alerts with an audio signal during lowering and raising operation.A loud siren output in case of alarm or emergency.Can be lowered or raised automatically in case of emergency (user’s preference, optional at no cost), programmed to stop as standard. Can be lowered and raised manually in case of power failure or during the maintenance service with manual pump and manual discharge feature.Automatic raise up mode deploys (optionally with synchronized loop detector) the bollard after the vehicle has passed over.
Motor, hydraulic pump and solenoid valves are contained in an easily accessible hot-dip-galvanized and electrostatic powder painted cabinet with a built-in lock lid. (Opt. Stainless Steel Cabinet) Cabinet Dimensions: 1000 mm x 570 mm x 1200 mm (W x L x H).
Bollard Anchorage Casing:Ø284 / 338 mm steel casing hot dip galvanized and structured for maximum strength.Casing is designed so that no vehicle crashing effect can displace it after embedded or installed into the ground.Hydraulic hose and cable entry openings enabling to use either of the three directions as per hyraulic power unit position and site conditons. Designed for easy access to hydraulic hose and cable connections. Ground mounting plate with installation holes for bolt type easy ground fixing. Includes cut-out for connection of submersible pump for rainwater drainage. Main Housing: Ø273 / 324 mm hot dip galvanised steel, structured to provide main housing for the bollard cylinder. Bollard cylinder pivoted with and moves through replaceable 5 rails (inner railing) made of special non-metal and positioned with equal distances from eachother for maximum rigidity and minimum material fraction. Contains the hydraulic cylinder lower connection. Thanks to the bollard anchorage casing, the main housing can be easily replaceable together with the bollard cylinder in case of a damage in any kind.
*Design and specifications are subject to change without notice.
Bollard Cylinder (impact blocking unit) :Ø220 / 270mm stainless steel sleeve on hot-dip galvanised steel with 10mm wall thickness.
Demountable bollard top plate made of aluminium with 360° visible red flashing LED indicators. Furnished with red, white or yellow reflecting strips compliant to “E” standard. Bollard cylinder pivoted with and moves through replaceable 5 rails (outer railing) made of special non-metal and positioned with equal distances from eachother for maximum rigidity and minimum material fraction. Contains the hydraulic cylinder upper connection. Road Surface Plate: 15 mm steel hot-dip galvanised, colored with elctrostatic powder coating in (other RAL colors are optionally available).Easy disassembly by its bolt type connection. Dust sealant / wiper seal.
Manual Control Button Unit: Provided with an IP67 CRM yellow box and 10mt cable including 3 switches for downwards, upwards, stop (optional emergency operation), equipped with built-in LED visual indications.
Compatibility with Access Control Systems:Can be utilized through, card reader, finger print, biometric systems and similar any kind of access control systems (by third parties).
Traffic Lights (red-green), Traffic Light Pole, Loop Detector (double/single antenna), Beam Detector, 220V or 24V DC Motor, Remote Control (receiver and transmitter are 3 channels), UPS, Photocell Sensor (receiver+ transmitter with 50cm height pole), RB CONT. UNIT.V.001 Control Unit, Intercom, External Buttons, Emergency Submersible Pump, Hydraulic Accumulator for Emergency Fast Raise-up, Oil Cooler, Oil Heater, Heater for Electronic Components, Powered Audio Signal (siren), PLC Diagnostic Monitor, IP67 box (for PLC, SMPS, connectors etc inside power unit), oil level sensor. Easy Installation with C30 grade concrete. Possible to install multiple units. In case of multiple unit installation, 1200mm gap between the bollards is recommended.
Above Ground Structure :
Control System :
Optional Features :and Accessories
Installation :
TBD BOLLARD
*Design and specifications are subject to change without notice.
FIXED BOLLARD
HBD 270 S.../ HBD 324 S...
10mm +65/90mm special star formed solid beams of 10mm thickness.
Wall Thickness
Impact Resistance Crash Test
Outer Body Surface
Designed and produced to withstand M50 (K12)
Designed and produced to withstand M40 (K8)
Designed and produced to withstand M30 (K4)
Electrostatic powder coated hot dip galvanised steel.(opt. stainless steel)
Visibility
Installation
Electrostatic powder coated hot dip galvanised steel.(opt. stainless steel)
Reflecting strips compliant to “E” standard, red/white/yellow colours.
Easy installation with adjustable balance pedestals and C30 grade concrete.
Stainless steel sleeve on hot dip galvanised body.
10mm +65/90mm special star formed solid beams of 5mm thickness. 10 mm
RBD 270 S.../ RBD 324 S... TBD 220 S.../ TBD 270 S...
*Shape and sizes are for reference only. Fixed bollards can be identical with your retractable bollard or are available in any other specific shape and dimension.
Operation :
Diameter :
Height (Above Ground) :
Installation :
Options and Accessories :
Fixed, non-retractable
220mm - 324mm (other diameters available optionally)
500-1200mm (other heights available optionally)
Ground embedding, easy fixed.
Different material and colour options, 360° visible LED indicator.
*Design and specifications are subject to change without notice.
CODE TYPEDIAMETER
-D-(mm)
HEIGHT-H-
(mm)
UNDERGROUND DIMENSIONS (mm)
(A x B x C)
CONCRETE OUTER DIMENSIONS (mm)
(W x L x X)MOTOR
SPEEDRaise/Lower
(seconds) COLOR
FIELDS OF INSTALLATION
CRASH TEST
HBD 324 H 90 324 900 720 x 720 x 1500 1500 x 2000 x 1750 3 - 5 -HBD 324 H 80 324 800 720 x 720 x 1400 1500 x 2000 x 1650 2,5 - 4,5 -HBD 324 H 70 324 700 720 x 720 x 1300 1500 x 2000 x 1550 2,5 - 4 -HBD 275 H 90 270 900 720 x 720 x 1500 1500 x 2000 x 1750 3 - 5 �HBD 270 H 80 270 800 720 x 720 x 1400 1500 x 2000 x 1650 2,5 - 4,5 -HBD 270 H 70 270 700 720 x 720 x 1300 1500 x 2000 x 1550 2,5 - 4 -RBD 324 H 90 324 900 720 x 720 x 1500 1500 x 2000 x 1750 3 - 5 -RBD 324 H 80 324 800 720 x 720 x 1400 1500 x 2000 x 1650 2,5 - 4,5 -RBD 324 H 70 324 700 720 x 720 x 1300 1500 x 2000 x 1550 2,5 - 4 -RBD 270 H 90 270 900 720 x 720 x 1500 1500 x 2000 x 1750 3 - 5 -RBD 270 H 80 270 800 720 x 720 x 1400 1500 x 2000 x 1650 2,5 - 4,5 -RBD 270 H 70 270 700 720 x 720 x 1300 1500 x 2000 x 1550 2,5 - 4 -TBD 270 H 70 270 700 720 x 720 x 1045 900 x 900 x 1150 1,8 - 3,5 -TBD 270 H 60 270 600 720 x 720 x 945 900 x 900 x 1050 -TBD 270 H 50 270 500 720 x 720 x 845 900 x 900 x 950 -TBD 220 H 70 220 700 595 x 595 x 1045 750 x 750 x 1150 1,8 - 3,5 -TBD 220 H 60 220 600 595 x 595 x 945 750 x 750 x 1050 -TBD 220 H 50 220 500 595 x 595 x 845 750 x 750 x 950 -LBD 250 H 90 250 900 720 x 720 x 1245 900 x 900 x 1350 -LBD 250 H 70 250 700 720 x 720 x 1045 900 x 900 x 1150 -LBD 250 H 50 250 500 720 x 720 x 845 900 x 900x 950 -
HYDRAULIC BOLLARDS TYPICAL SPECIFICATIONS
Heavy DutyAn�-Terror
Opt. 220V
380V - 50/60 Hz 3 Phase2,2 kW
Opt. 220V
380V - 50/60 Hz 3 Phase2,2 kW
Opt. 220V
380V - 50/60 Hz 3 Phase1,5 kW
Opt. 220V
380V - 50/60 Hz 3 Phase1,5 kW
RAL-9006on hot dip galvanised
steel
HBD
ReinforcedModel
RAL-9006on hot dip galvanised
steel
RBD
2 - 4
(Lighted)Illuminated
4
Acrylic panelon hot dip galvanised
steel
LBD
TrafficControl
304 Grade Stainless Steel
Opt. Powdercoated on
Hot-dip galvanised
steel
TBD
2 - 4
Different heights are op�onally available: HBD: from 700 to 1200 mm RBD: from 700 to 1200 mm TBD: from 500 to 1200 mm
Subject to change based on the number of bollards to be fed in case of mul�ple installa�ons.
Any other RAL color is op�onally available.
FIELDS OF INSTALLATION:
HBD - Heavy Duty Bollard:- Military and defence facili�es,- Power plants,- Diploma�c premises,- Airports,- Prisons, - High threat sites, etc.
RBD - Reinforced Bollard:- Government offices,- Financial ins�tu�ons,- Industrial high risk sites, etc.
TBD - Traffic Control Bollard:- Shopping centers,- Hotels,- Pedestrian roads, municipal areas,- Residences,- Car park entries,- Universi�es and other educa�onal buildings,- Low risk buildings, etc.
HBD
(Hea
vy D
uty
Bolla
rd)
RBD
(Rei
nfor
ced
Bolla
rd)
TBD
(Tra
ffic B
olla
rd)
Axle
Loa
d
Wal
l Thi
ckne
ss
Impa
ct R
esist
ance
Cras
h Te
st
Spee
d
70 T
.50
T.
50 T
.10
mm
+ 6
5/90
mm
spe
cial
sta
r 10
mm
+ 6
5/90
mm
spe
cial
sta
r fo
rmed
sol
id b
eam
s of
10m
m
thic
knes
s.10
mm
form
ed s
olid
bea
ms
of 5
mm
th
ickn
ess.
Oil
Leve
l Sen
sor (
PLC)
Stan
dard
Op�
onal
Op�
onal
M50
(K 1
2) &
M40
(K 8
) te
sted
&ce
r�fie
d (H
BD 2
75 H
90)
. De
sign
ed a
nd p
rodu
ced
to w
ithst
and
M30
(K4)
Grou
nd A
ssem
bly
Supp
or�n
g Ba
rsSt
anda
rdSt
anda
rdV
form-
Fini
shEl
ectro
sta�
c po
wde
r coa
ted.
Elec
trost
a�c
pow
der c
oate
d.St
ainl
ess
stee
l sle
eve.
2.5
- 5 s
ec. (
sing
le u
nit i
nsta
lla�o
n)2.
5 - 5
sec
. (si
ngle
uni
t ins
talla
�on)
1,8
- 4 s
ec. (
sing
le u
nit i
nsta
lla�o
n)
Bolla
rds
Gene
ral T
echn
ical
Spe
cific
a�on
s (hy
drau
lic se
ries)
Stan
dard
Fea
ture
s and
Bui
lt-in
Pro
per�
es
Op�
onal
Fea
ture
s
UPS.
Rain
wat
er d
rain
age
pum
p (e
mer
genc
y su
bmer
sibl
e pu
mp)
.
Loop
ded
ecto
r.
PLC
diag
nos�
c m
onito
r (LA
N).
Traffi
c lig
ht p
ole.
Beam
ded
ecto
r.Ph
otoc
ell.
Accu
mul
ator
for e
mer
genc
y fa
st ra
ise
up (a
pp.1
,5sn
spe
ed).
Traffi
c lig
hts
(red-
gree
n), d
ia:1
00m
m o
r 200
mm
Rem
ote
cont
rol (
wire
less
).
Audi
o Si
gnal
(Sire
n, p
ower
ed).
IP 6
7 co
ntro
l box
(for
PLC
, SM
PS, c
onne
ctor
s, c
ircui
t bre
aker
s, lo
op d
etec
tor (
if an
y), r
elay
s) .
Oil
leve
l sen
sor.
1 ph
ase
220
V AC
or 2
4 V
DC M
otor
.
Oil
cool
er.
Oil
heat
er.
Com
pone
nt h
eate
r.
Diffe
rent
mat
eria
ls a
nd c
olor
s.
Out
puts
(sire
n, li
ght,
beam
, flas
hes)
.
380V
3-P
hase
AC.
IP 6
7 m
anua
l con
trol b
u�on
uni
t 3 fu
nc�o
ns.
Emer
genc
y bu
�on.
Doub
le a
c�ng
hyd
raul
ic m
ovem
ent.
Dow
n/de
scen
d va
lve
(man
ual)
in c
ase
of p
ower
off
or m
aint
enan
ce
PLC
con
trol u
nit.
24 V
DC
cont
rol.
24 V
DC
sole
noid
s.Au
tom
a�c/
man
ual p
rogr
amm
able
acc
ess
auth
oris
a�on
.
25 c
c ha
nd p
ump
(man
ual).
Mov
emen
t buz
zer.
Hot d
ip g
alva
nise
d st
eel m
ain
body
.Ea
sy a
cces
ibili
ty fo
r ser
vici
ng.
Alum
iniu
m to
p pl
ate
with
25m
m th
ickn
ess.
Hose
s fo
r Hyd
raul
ic O
il (fo
r int
erco
nnec
�on
in c
ase
of m
ul�p
le in
stal
la�o
ns).
360
°C w
ith h
igh
visi
bilit
y fla
shin
g LE
D's
in re
d.Re
flec�
ng s
trips
com
plia
nt to
"E" s
tand
ard,
red/
whi
te/y
ello
w c
olor
s.Ho
se fo
r Hyd
raul
ic O
il (1
0mt)
Oil
leve
l and
tem
pera
ture
indi
cato
r.
Oil
tank
with
par
�cul
e fil
ter.
Oil
tank
with
mag
ne�c
met
al c
olle
ctor
.Ho
t dip
gal
vani
sed
pow
er &
con
trol u
nit c
abin
. -5
°C /
+55°
C (O
pt. -
30°C
/ +7
0°C)
45 /
60 lt
oil
tank
cap
acity
(dep
endi
ng o
n th
e nu
mbe
r of b
olla
rds
in c
ase
of m
ul�p
le in
stal
la�o
ns).
Easy
inst
alla
�on.
IP 5
5 - H
ydra
ulic
Pow
er U
nit,
IP 5
8 - U
nder
grou
nd S
truc
ture
, IP
68 -
Hydr
aulic
Pist
on
HBD(Heavy Duty Bollard)
RBD(Reinforced Bollard)
TBD(Traffic Bollard)
Axle Load 70 T. 50 T. 50 T.
Wall Thickness10mm + 65/90mm special star formed solid beams of 10mm
thickness
10mm + 65/90mm special star formed solid beams of 5mm
thicknessSolid 4 mm (at every 35-55cm.)
Oil Level Sensor Standard Op�onal Op�onal
Crash TestM40 P1 (K 8) tested&cer�fied
(HBD 275 H 90).Designed and produced to withstand
M30 (K4) -
Hydraulic Cylinder Unit Ø50mm, H8 honed. Ø40mm, H9 honed. Ø40mm, H9 honed.
Ground Assembly Suppor�ng Bar Standard Standard -
Finish Electrosta�c powder coated. Electrosta�c powder coated. Stainless steel sleeve.
Speed 4 - 5 sec. (single unit installa�on) 4 - 5 sec. (single unit installa�on) 3 - 3,5 sec. (single unit installa�on)
Outputs (siren, light, beam, flashes).
BollardsGeneral Technical Specifica�ons
Standard Features and Built-in Proper�es380V 3-Phase AC.
IP 67 manual control bu�on unit 3 func�ons.Emergency bu�on.
Double ac�ng hydraulic movement.Down/descend bu�on (manual) in case of power off or maintenance
PLC control unit.24 V DC control.
24 V DC solenoids.Automa�c/manual programmable access authorisa�on.
25 cc hand pump (manual).
Movement buzzer.Hot dip galvanised steel main body.
Easy accesibility for servicing.Aluminium top plate with 25mm thickness.
Hoses for Hydraulic Oil (for interconnec�on in case of mul�ple installa�ons).
360°C with high visibility flashing LED's in red.Reflec�ng strips compliant to "E" standard, red/white/yellow colors.
Hose for Hydraulic Oil (10mt)
Rain water drainage pump (emergency submersible pump).
Loop dedector.
Oil level and temperature indicator.
Oil tank with par�cule filter.Oil tank with magne�c metal collector.
Hot dip galvanised power & control unit cabin. -5°C / +55°C (Opt. -30°C / +70°C)
45 / 60 lt oil tank capacity (depending on the number of bollards in case of mul�ple installa�ons).
Easy installa�on.
Op�onal FeaturesPLC diagnos�c monitor (LAN).
Traffic light pole.
Beam dedector.Photocell.
Accumulator for emergency fast raise up (app.1,5sn speed).Traffic lights (red-green), dia:100mm or 200mm
Remote control (wireless).
Audio Signal (Siren, powered).
IP 67 control box (for PLC, SMPS, connectors, circuit breakers, loop detector (if any), relays) .
Oil level sensor.1 phase 220 V AC or 24 V DC Motor.
Oil cooler.Oil heater.
Component heater.
Different materials and colors.
UPS.
HBD
(Hea
vy D
uty
Bolla
rd)
RBD
(Rei
nfor
ced
Bolla
rd)
TBD
(Tra
ffic B
olla
rd)
Axle
Loa
d
Wal
l Thi
ckne
ss
Impa
ct R
esist
ance
Cras
h Te
st
Spee
d
70 T
.50
T.
50 T
.10
mm
+ 6
5/90
mm
spe
cial
sta
r 10
mm
+ 6
5/90
mm
spe
cial
sta
r fo
rmed
sol
id b
eam
s of
10m
m
thic
knes
s.10
mm
form
ed s
olid
bea
ms
of 5
mm
th
ickn
ess.
Oil
Leve
l Sen
sor (
PLC)
Stan
dard
Op�
onal
Op�
onal
M50
(K 1
2) &
M40
(K 8
) te
sted
&ce
r�fie
d (H
BD 2
75 H
90)
. De
sign
ed a
nd p
rodu
ced
to w
ithst
and
M30
(K4)
Grou
nd A
ssem
bly
Supp
or�n
g Ba
rsSt
anda
rdSt
anda
rdV
form-
Fini
shEl
ectro
sta�
c po
wde
r coa
ted.
Elec
trost
a�c
pow
der c
oate
d.St
ainl
ess
stee
l sle
eve.
2.5
- 5 s
ec. (
sing
le u
nit i
nsta
lla�o
n)2.
5 - 5
sec
. (si
ngle
uni
t ins
talla
�on)
1,8
- 4 s
ec. (
sing
le u
nit i
nsta
lla�o
n)
Bolla
rds
Gene
ral T
echn
ical
Spe
cific
a�on
s (hy
drau
lic se
ries)
Stan
dard
Fea
ture
s and
Bui
lt-in
Pro
per�
es
Op�
onal
Fea
ture
s
UPS.
Rain
wat
er d
rain
age
pum
p (e
mer
genc
y su
bmer
sibl
e pu
mp)
.
Loop
ded
ecto
r.
PLC
diag
nos�
c m
onito
r (LA
N).
Traffi
c lig
ht p
ole.
Beam
ded
ecto
r.Ph
otoc
ell.
Accu
mul
ator
for e
mer
genc
y fa
st ra
ise
up (a
pp.1
,5sn
spe
ed).
Traffi
c lig
hts
(red-
gree
n), d
ia:1
00m
m o
r 200
mm
Rem
ote
cont
rol (
wire
less
).
Audi
o Si
gnal
(Sire
n, p
ower
ed).
IP 6
7 co
ntro
l box
(for
PLC
, SM
PS, c
onne
ctor
s, c
ircui
t bre
aker
s, lo
op d
etec
tor (
if an
y), r
elay
s) .
Oil
leve
l sen
sor.
1 ph
ase
220
V AC
or 2
4 V
DC M
otor
.
Oil
cool
er.
Oil
heat
er.
Com
pone
nt h
eate
r.
Diffe
rent
mat
eria
ls a
nd c
olor
s.
Out
puts
(sire
n, li
ght,
beam
, flas
hes)
.
380V
3-P
hase
AC.
IP 6
7 m
anua
l con
trol b
u�on
uni
t 3 fu
nc�o
ns.
Emer
genc
y bu
�on.
Doub
le a
c�ng
hyd
raul
ic m
ovem
ent.
Dow
n/de
scen
d va
lve
(man
ual)
in c
ase
of p
ower
off
or m
aint
enan
ce
PLC
con
trol u
nit.
24 V
DC
cont
rol.
24 V
DC
sole
noid
s.Au
tom
a�c/
man
ual p
rogr
amm
able
acc
ess
auth
oris
a�on
.
25 c
c ha
nd p
ump
(man
ual).
Mov
emen
t buz
zer.
Hot d
ip g
alva
nise
d st
eel m
ain
body
.Ea
sy a
cces
ibili
ty fo
r ser
vici
ng.
Alum
iniu
m to
p pl
ate
with
25m
m th
ickn
ess.
Hose
s fo
r Hyd
raul
ic O
il (fo
r int
erco
nnec
�on
in c
ase
of m
ul�p
le in
stal
la�o
ns).
360
°C w
ith h
igh
visi
bilit
y fla
shin
g LE
D's
in re
d.Re
flec�
ng s
trips
com
plia
nt to
"E" s
tand
ard,
red/
whi
te/y
ello
w c
olor
s.Ho
se fo
r Hyd
raul
ic O
il (1
0mt)
Oil
leve
l and
tem
pera
ture
indi
cato
r.
Oil
tank
with
par
�cul
e fil
ter.
Oil
tank
with
mag
ne�c
met
al c
olle
ctor
.Ho
t dip
gal
vani
sed
pow
er &
con
trol u
nit c
abin
. -5
°C /
+55°
C (O
pt. -
30°C
/ +7
0°C)
45 /
60 lt
oil
tank
cap
acity
(dep
endi
ng o
n th
e nu
mbe
r of b
olla
rds
in c
ase
of m
ul�p
le in
stal
la�o
ns).
Easy
inst
alla
�on.
IP 5
5 - H
ydra
ulic
Pow
er U
nit,
IP 5
8 - U
nder
grou
nd S
truc
ture
, IP
68 -
Hydr
aulic
Pist
on
HBD(Heavy Duty Bollard)
RBD(Reinforced Bollard)
TBD(Traffic Bollard)
Axle Load 70 T. 50 T. 50 T.
Wall Thickness10mm + 65/90mm special star formed solid beams of 10mm
thickness
10mm + 65/90mm special star formed solid beams of 5mm
thicknessSolid 4 mm (at every 35-55cm.)
Oil Level Sensor Standard Op�onal Op�onal
Crash TestM40 P1 (K 8) tested&cer�fied
(HBD 275 H 90).Designed and produced to withstand
M30 (K4) -
Hydraulic Cylinder Unit Ø50mm, H8 honed. Ø40mm, H9 honed. Ø40mm, H9 honed.
Ground Assembly Suppor�ng Bar Standard Standard -
Finish Electrosta�c powder coated. Electrosta�c powder coated. Stainless steel sleeve.
Speed 4 - 5 sec. (single unit installa�on) 4 - 5 sec. (single unit installa�on) 3 - 3,5 sec. (single unit installa�on)
Outputs (siren, light, beam, flashes).
BollardsGeneral Technical Specifica�ons
Standard Features and Built-in Proper�es380V 3-Phase AC.
IP 67 manual control bu�on unit 3 func�ons.Emergency bu�on.
Double ac�ng hydraulic movement.Down/descend bu�on (manual) in case of power off or maintenance
PLC control unit.24 V DC control.
24 V DC solenoids.Automa�c/manual programmable access authorisa�on.
25 cc hand pump (manual).
Movement buzzer.Hot dip galvanised steel main body.
Easy accesibility for servicing.Aluminium top plate with 25mm thickness.
Hoses for Hydraulic Oil (for interconnec�on in case of mul�ple installa�ons).
360°C with high visibility flashing LED's in red.Reflec�ng strips compliant to "E" standard, red/white/yellow colors.
Hose for Hydraulic Oil (10mt)
Rain water drainage pump (emergency submersible pump).
Loop dedector.
Oil level and temperature indicator.
Oil tank with par�cule filter.Oil tank with magne�c metal collector.
Hot dip galvanised power & control unit cabin. -5°C / +55°C (Opt. -30°C / +70°C)
45 / 60 lt oil tank capacity (depending on the number of bollards in case of mul�ple installa�ons).
Easy installa�on.
Op�onal FeaturesPLC diagnos�c monitor (LAN).
Traffic light pole.
Beam dedector.Photocell.
Accumulator for emergency fast raise up (app.1,5sn speed).Traffic lights (red-green), dia:100mm or 200mm
Remote control (wireless).
Audio Signal (Siren, powered).
IP 67 control box (for PLC, SMPS, connectors, circuit breakers, loop detector (if any), relays) .
Oil level sensor.1 phase 220 V AC or 24 V DC Motor.
Oil cooler.Oil heater.
Component heater.
Different materials and colors.
UPS.
for PUBLIC &RESIDENTIAL AREA CAR PARKS...
Easy to install and use,Durable body structure,Wide options and accessories alternatives,Compatible with any kind of access control system,100% Made in Turkey.
Up to 6000 mm.
CAR PARK
BR 2040 / BR 2060 ARM BARRIER
*Design and specifications are subject to change without notice.
Folding Arm
Main Options and Accessories
Arm Resting Post
Safety Sensor (photocell)
Loop Dedector View
Rubber Cushion& Impact Sensor
Under Arm Curtain Barrier
LED Indicator and Diffuser
Loop Dedector View
(1) : 500x500x400 mm concrete
(1)
(2)
(2) : 300x300x150 mm concrete
Installation ViewGENERAL FEATURESBody Dimensions 330 x 280 x 1040(height) mm
Body ColourGalvanised Steel – Electrosta�c Powder CoatedBody Material – FinishOrange (RAL 1033)
Access to Body Interiors Through Locked Lids on the Top and SideArm (Barrier) Length up to 6.0 mArm (Barrier) Material Aluminium
Arm Colour Anodized (opt. Electrosta�c Powder Coated in RAL Colours)
Body Substructure / Stand Concrete, 500 x 500 x 400 (height) mm
Power 110/220 V. 60/50 Hz. AC (%±10) 24 V. DC
Power Consump�on
750 W for arms > 4.0 m
Stand-by : 3 W,
Locking / Interlock Mechanical Reduc�on
Manual Control By Manual Lever
Opera�on ElectromechanicalOpera�on Speed 2 - 4 sec.
Opera�on Temperature / Humidity
-20°C/+68°C (Opt. -50°C with heater posi�ve)
IP Grade IP 54, suitable for outdoor usageNet Weight ~45 kg
Op�ons and Accessories
Safety sensor (photocell), loop dedector, Top flashing indicator, LED indicator and diffuser on the arm(flashing in 4 different types), traffic light,Arm res�ng post, support leg, folding arm, underarm curtain barrier, rubber cushion for arm, under arm impact sensor,Ba¦ery and charging unit, wireless remote control(receiver&transmi¦er), manual remote control
*
* *
*
During opera�on:550 W for arms < 4.0 m
for PUBLIC &RESIDENTIAL AREA CAR PARKS...
Easy to install and use,Durable body structure,Wide options and accessories alternatives,Compatible with any kind of access control system,100% Made in Turkey.
Up to 6000 mm.
CAR PARK
*Design and specifications are subject to change without notice.
Folding Arm
Main Options and Accessories
Arm Resting Post
Safety Sensor (photocell)
Loop Dedector View
Rubber Cushion& Impact Sensor
Under Arm Curtain Barrier
LED Indicator and Diffuser
Loop Dedector View
(1) : 500x500x400 mm concrete
(1)
(2)
(2) : 300x300x150 mm concrete
Installation ViewGENERAL FEATURESBody Dimensions 330 x 280 x 1040(height) mm
Body ColourGalvanised Steel – Electrosta�c Powder CoatedBody Material – FinishOrange (RAL 1033)
Access to Body Interiors Through Locked Lids on the Top and SideArm (Barrier) Length up to 6.0 mArm (Barrier) Material Aluminium
Arm Colour Anodized (opt. Electrosta�c Powder Coated in RAL Colours)
Body Substructure / Stand Concrete, 500 x 500 x 400 (height) mm
Power 110/220 V. 60/50 Hz. AC (%±10) 24 V. DC
Power Consump�on
750 W for arms > 4.0 m
Stand-by : 3 W,
Locking / Interlock Mechanical Reduc�on
Manual Control By Manual Lever
Opera�on ElectromechanicalOpera�on Speed 2 - 4 sec.
Opera�on Temperature / Humidity
-20°C/+68°C (Opt. -50°C with heater posi�ve)
IP Grade IP 54, suitable for outdoor usageNet Weight ~45 kg
Op�ons and Accessories
Safety sensor (photocell), loop dedector, Top flashing indicator, LED indicator and diffuser on the arm(flashing in 4 different types), traffic light,Arm res�ng post, support leg, folding arm, underarm curtain barrier, rubber cushion for arm, under arm impact sensor,Ba¦ery and charging unit, wireless remote control(receiver&transmi¦er), manual remote control
*
* *
*
During opera�on:550 W for arms < 4.0 m
TYR
E K
ILLE
R
TKS _ _ _ - M TKS _ _ _ - A TKS _ _ _ - F
Opera�on
Bi-di rec�onal
Spikes retract independent from each other with the movement of the vehicle pass ing in the free flow direc�on. Gets back to i ts normal pos i�on by ba lance.
Passage release in restricted di rec�on by the sol id sha� control led by lever suppl ied, spikes move a l together.
Bi -di rec�onal
Spikes retract independent from each other with the movement of the vehicle pass ing in the free flow direc�on. Gets back to i ts normal pos i�on by ba lance.
Passage release in restricted di rec�on by the sol id sha� control led by motor, spikes move a l together.
Uni -di rec�onal
Spikes retract independent from each other with the movement of the vehicle pass ing in the free flow direc�on. Gets back to i ts normal pos i�on by ba lance.
Release Mechanism Lever Motor N/A
Power N/A 110/220 V 50-60Hz N/A
ControlsManual Control Lever (can be control led from ei ther s ides)
Manual Control Bu�on N/A
Free Flow Direc�onOne way free, one way manual ly control led by lever.
One way free, one way control led by motor, compa�ble to be used by any kind of access control system (by thi rd par�es).
One way only.
Spikes
Body
Finish
Recommended max speed
Axle Load Capaci ty
Insta l la�onOp�onal Features and Accessories
-Wireless Remote Control (receiver/transmi�er), traffic l ight.
-
Easy and rapid insta l la�on directly on road surface without digging and civi l works .
Opera�on Temperature, Humidi ty
Unl imited (freezing of moving parts sha l l be avoided).
-20 / +68°C (-50 with opt. heater uni t), RF 95% non-condens ing
Unl imited (freezing of moving parts sha l l be avoided).
5 km/h
10mm thick, 55mm high (other heights op�onal ly ava i lable) electro ga lvanised s teel , independently moving in the free flow direc�on.
Mul�-pivo�ng of the spike sha� (at every 80mm) prevents deforma�on on the sha� a�er entry a�empts from forbidden di rec�on.
Thanks to the insert / wedge type connec�ons 50 Tons .
Spikes : Electrosta�c powder coated over electro ga lvanised s teel in yel low color (other colors are op�onal ly ava i lable).
Body: Electrosta�c powder coated over hot-dip ga lvanised non-s l ippery s teel in black color (other colors are op�onal ly ava i lable).
70mm body height from road surface (excl .spikes), ful ly hot dip ga lvanised s teel materia l , reinforced s tructure, wedge type connec�on before welding for maximum strength del ivering weights di rectly on the ground enabl ing the utmost axle load res i s tance. An�-s l ip passage surface, edges ended with angular end �ps .Modular body s tructure a l lowing mul�ple bodies connected together to obta in the required tota l width.Includes water dra inage holes .
SURFACE MOUNT TYRE KILLER(TKS SERIES)
*Design and specifications are subject to change without notice.
730
55
70
100480 480
100
55
70
1160
80 10
55
70
55
70
EMBEDDED MOUNT TYRE KILLER(TKU SERIES)
*Design and specifications are subject to change without notice.
TKU _ _ M _ _ _ TKU _ _ A _ _ _ TKU _ _ F _ _ _
Opera�on
Bi-di rec�onal
Spikes retract independent from each other with the movement of the vehicle pass ing in the free flow direc�on. Gets back to i ts normal pos i�on by ba lance.
Passage release in restricted di rec�on by the sol id sha� control led by lever suppl ied, spikes move a l together.
Bi -di rec�onal
Spikes retract independent from each other with the movement of the vehicle pass ing in the free flow direc�on. Gets back to i ts normal pos i�on by ba lance.
Passage release in restricted di rec�on by the sol id sha� control led by motor, spikes move a l together.
Uni -di rec�onal
Spikes retract independent from each other with the movement of the vehicle pass ing in the free flow direc�on. Gets back to i ts normal pos i�on by ba lance.
Release Mechanism Lever Motor N/A
Power N/A 110/220 V 50-60Hz N/A
ControlsManual Control Lever (can be control led from ei ther s ides)
Manual Control Bu�on N/A
Free Flow Direc�onOne way free, one way manual ly control led by lever.
One way free, one way control led by motor, compa�ble to be used by any kind of access control system (by thi rd par�es).
One way only.
Spikes
Body
Finish
Recommended max. Speed
Axle Load Capaci ty
Insta l la�onOp�onal Featuresand Accessories
-Wireless Remote Control (receiver/transmi�er), traffic l ight.
-
Easy insta l la�on with bol ts and concrete anchorage.
5 km/h
Thanks to the insert/wedge type connec�ons 50 Tons .
10mm thick, 110mm high (other heights op�onal ly ava i lable) electro ga lvanised s teel , independently moving in the free flow direc�on.
Mul�-pivo�ng of the spike sha� (at every 75mm) prevents deforma�on on the sha� a�er entry a�empts from forbidden di rec�on.
Opera�on Temparature, Humidi ty
Unl imited (freezing of moving parts sha l l be avoided).
-20 / +68 C (-50 with opt. heater uni t), RF 95% non-condens ing.
Unl imited (freezing of moving parts sha l l be avoided).
Body embeddded into ground, ful ly hot dip ga lvanised s teel materia l , reinforced s tructure, wedge type connec�ons before welding for maximum strength del ivering weights di rectly on the ground enabl ing the utmost axle load res is tance.
Can be produced according to the required tota l width.Includes water dra inage holes .
Spikes : Electrosta�c powder coated over electro ga lvanised s teel in yel low color (other colors are op�onal ly ava i lable).
Body: Electrosta�c powder coated over hot-dip ga lvanised in black color (other colors are op�onal ly ava i lable).
1115
910
75
976
155
11010
475
330
110
155
155
110
110
155
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
...............................................................................................................................................................................................................................................................................................................................................
www.ozak-t.com+90 262 373 48 48Google Map
Çuhane Cd. N: 130Köseköy / Kartepe / Kocaeli / TÜRKİYE
T: +90 262 373 48 48F: +90 262 373 48 48E: [email protected]
08.06.2017DD-75-168 R(4)