18
TESTERS 143 142 146 148 150 With more patented testers than any other manufacturer, Gardner Bender products make electrical work faster and safer. 137

Outside 59159 GBE - aikencolon.com · TESTERS 143 142 146 148 150 With more patented testers than any other manufacturer, Gardner Bender products make electrical work faster and safer

Embed Size (px)

Citation preview

TESTERS

143

142

146

148

150

With more patented testers than any

other manufacturer, Gardner Bender

products make electrical work faster

and safer.

137

Testers Section 9/7/05 1:21 PM Page 137

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

138

Battery Tester (Analog) . . . . . . . . . . . . . . .151

Continuity Testers

Continuity Testers Comparison Chart . . .142

Heavy-Duty . . . . . . . . . . . . . . . . . . . . . . .142

Heavy-Duty & Flashlight . . . . . . . . . . . . .142

Multimeters - Analog . . . . . . . . . . . . . . . . .147

Analog Multimeters Comparison Chart . .147

Five Function, 12-Range . . . . . . . . . . . .147

Six Function, 14-Range . . . . . . . . . . . . .147

Six Function, 19-Range . . . . . . . . . . . . .147

Multimeters - Clamp-On . . . . . . . . . . . . . . .150

Clamp-On Comparison Chart . . . . . . . . .150

AC Clamp Meter with Lockjaw . . . . . . . .150

AC Current Line Splitter . . . . . . . . . . . . .151

Auto-Ranging Digital . . . . . . . . . . . . . . . .150

Digital . . . . . . . . . . . . . . . . . . . . . . . . . . .150

True RMS . . . . . . . . . . . . . . . . . . . . . . . .150

Multimeters - Digital . . . . . . . . . . . . . . . . .148

Digital Multimeters Comparison Chart . .149

Four Function, 6-Range . . . . . . . . . . . . .148

Five Function, 19-Range . . . . . . . . . . . .148

Seven Function, 19-Range . . . . . . . . . . .148

Ten Function, 32-Range . . . . . . . . . . . . .148

13 Function, 32-Range . . . . . . . . . . . . .149

13 Function, 29-Range Auto-Ranging . .149

15 Function, 32-Range Auto-Ranging . .149

Non-Contact Voltage Testers . . . . . . . . . . .143

Non-Contact Voltage Testers

Comparison Chart . . . . . . . . . . . . . . . .143

Circuit Alert™ . . . . . . . . . . . . . . . . . . . . .143

Live-Wire™ . . . . . . . . . . . . . . . . . . . . . . .143

In-Wall Pipe & Wire Detector . . . . . . . . .143

Receptacle Testers/Analyzers

Receptacle Testers/Analyzers

Comparison Chart . . . . . . . . . . . . . . . .144

Circuit Tracker™ . . . . . . . . . . . . . . . . . . .145

Circuit Tracker™ Adapter Set . . . . . . . . .145

Ground Fault Receptacle Tester &

Circuit Analyzer . . . . . . . . . . . . . . . . . .144

Lan Tracker™ . . . . . . . . . . . . . . . . . . . . .146

Receptacle Tester & Circuit Analyzer . . .144

Sure Wire™ Branch Circuit Analyzer . . . .144

Wire Tracker™ . . . . . . . . . . . . . . . . . . . .146

Voltage Testers . . . . . . . . . . . . . . . . . .139-142

Voltage Testers Comparison Chart . . . . .139

6-way . . . . . . . . . . . . . . . . . . . . . . . . . . .140

6-way with Polarity Indicators . . . . . . . .140

Heavy-Duty 4-way . . . . . . . . . . . . . . . . .139

High Visibility . . . . . . . . . . . . . . . . . . . . .140

High Visibility Dual Indication . . . . . . . . .140

Low Voltage Twin Probe . . . . . . . . . . . . .139

Screwdriver & Circuit Tester . . . . . . . . . .139

Screwdriver, Voltage Probe &

Continuity Tester . . . . . . . . . . . . . . . . .141

Solenoid . . . . . . . . . . . . . . . . . . . . . . . . .141

Voltage & Continuity Tester . . . . . . . . . .141

Volt Check™ Voltage & Continuity Tester 142

Volt-Doctor® Voltage & Continuity Tester 141

Stud Seeker™ . . . . . . . . . . . . . . . . . . . . . . .152

Telephone Line Testers (single and dual) . .151

Tester Leads . . . . . . . . . . . . . . . . . . . . . . . .152

Tester Replacement Parts

(fuses, leads, batteries) . . . . . . . . . . . . .153

Testers Section 9/7/05 1:21 PM Page 138

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

139

Voltage TestersComparison Chart

Feature

AC Voltage 5-50 80-250 90-500 100-250 120-480 100-300 120-480 120-480 4.5-440 12-440 120-600 120-600 24-600DC Voltage 5-50 80-250 90-500 100-250 110 100-300 150-500 120-480 4.5-440 — 120-600 120-600 6-220Lead Length 41⁄2" — 41⁄2" 41⁄2" 41⁄2" 41⁄2" 36" 36" 36" — 30" 30" 32"

UL / cULUS / CSA Visual Audible Vibration Polarity Continuity Test Pocket Clip Magnetic Back Warranty 1 1 1 1 1 1 5 5 5 1 1 5 5

GET-202

A

GST-201

GET-100

A

GET-102

HV

GET-213

A

GET-213

HV

GET-206

GET-206

P

GET-207

GCV-20

6

GVT-92

GVC-300

GVC-100

0

Low Voltage Twin Probe Circuit TesterTests AC/DC Voltage from 5 - 50 V.

• Indicator glows when voltage is present andbrightens as voltage increases.

• Insulated alligator clip test leads.

• Pocket clip for added convenience.

• Reinforced casing.

Twin Probe Circuit TesterTests AC/DC Voltage from 90 - 500 V.

• Neon indicator glows when voltage is presentand brightens as voltage increases.

• Insulated housing.

• Insulated test leads.

• Pocket clip for added convenience.

GET-202A

GET-100A

Screwdriver & Circuit Tester Tests AC/DC Voltage from 80 - 250 V.

• Handy pocket screwdriver is a fully functionalvoltage tester.

• Insulated screwdriver shaft.

• Pocket clip for added convenience.

WarrantyOne Year

WarrantyOne Year

Heavy-Duty 4-way Voltage TesterTests AC Voltage at 120, 240, 277 and 480 V and DC Voltage at 110 V.

• Individual indicators for each voltage rangeassures reliability.

• Functional, lightweight design features twinflexible leads and convenient pocket clip.

• Test leads store in housing.

WarrantyOne Year

GET-213A

WarrantyOne Year

GST-201

Testers Section 9/7/05 1:21 PM Page 139

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

140

High-Visibility Voltage TesterTests AC/DC Voltage from 100 - 250 V.

• Large, high-visibility neon bulb positively indicates the presence of voltage.

• Probes snap on bottom of housing for easy single hand testing.

• Insulated leads and housing.

• Patented.

High-Visibility Dual IndicationVoltage TesterTests AC/DC Voltage from 100 - 300 V.

• Two large, high-visibility neon bulbs positively indicate the presence of voltage.

• Individual indicators for each voltage range assure reliability of testing.

• Probes snap on bottom of housing for easy single-hand testing of outlets.

• Insulated leads and housing.

• Patented.

6-Way Circuit TesterTests AC Voltage at 120, 240, 480 V and DCVoltage at 150, 300 and 500 V.

• 36" test lead.

• Bright neon indicators.

• Rugged twin-probe design features heavy-duty test lead insulators.

WarrantyFive Year

GET-102HV

GET-213HV

GET-206

6-Way Circuit Tester with Polarity IndicatorsTests AC/DC Voltage at 120, 240 and 480 V.

• Tests for polarity.

• 36" test lead.

• Bright neon indicators.

• Rugged twin-probe design features heavy-duty test lead insulators.

GET-206P

WarrantyOne Year

WarrantyOne Year

WarrantyFive Year

Testers Section 9/7/05 1:21 PM Page 140

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

141

Voltage & Continuity TesterTests AC/DC Voltage from 4.5 - 440 V.

• LEDs indicate polarity.

• Tests for continuity with push-button operation.

• Rugged twin-probe design features heavy-duty 36" test leads.

Combination Screwdriver, VoltageProbe & Continuity TesterTests for Continuity and AC Voltage.

• Tests continuity on non-energized circuits.

• Tests from 12 - 440 V AC on energized circuits.

• LED indicator glows when voltage or continuity exists.

• Batteries included.

• Convenient screwdriver tip and pocket clip.

Solenoid Voltage TesterTest AC/DC Voltage from 120 - 600 V and DC Polarity.

• Dual voltage indication: solenoid vibration and neon bulb.

• Neon bulb indicates DC polarity.

• Retractable spring-loaded probe guards protect metal tips.

• Built-in slots in housing hold probes for one-hand testing and storage

• Leads store in housing for convenient carrying in pocket or pouch.

• High-impact case stands up to rugged service.

®

WarrantyOne Year

GET-207

GCV-206

GVT-92

Volt-Doctor® Voltage & Continuity Tester Tests AC/DC Voltage from 120 - 600 V.

• Indicates DC polarity.

• Tests continuity.

• Triple voltage indication: solenoid vibration, visual LEDs and audible buzzer.

• Ergonomic soft housing for comfort grip and impact resistance.

• Two 1.5 V button-cell batteries included.

• Patented.

GVC-300

®

WarrantyFive Year

WarrantyFive Year

WarrantyOne Year

Testers Section 9/7/05 1:21 PM Page 141

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

142

Volt Check™ Voltage & Continuity TesterMeasures AC/DC Voltage, Continuity and includes a non-contact AC Voltage Sensor.

• Automatically selects proper function with no adjustments necessary.

• Measures AC voltage from 24 - 600 V.

• Measures DC voltage from 6 - 220 V.

• Indicates DC polarity.

• Non-contact AC voltage sensing to 600 V (built into tip).

• Tests continuity.

• Convenient 32" leads and magnetic back for ease of use.

• Rubber overmolding.

• Patented.

• (3) AAA batteries included.

WarrantyFive Year

GVC-1000

Continuity TestersComparison Chart

Feature GCT-204 GFT-200

Visual Flashlight Pocket Clip Plastic Housing Metal Housing UL N/R N/R

Lead Length 30" 26"

Warranty 1 1

Batteries (2) AAA (2) AA(not included)

Heavy-Duty Continuity TesterTests for continuity in non-energized circuits.

• 30" insulated test lead with alligator clip.

• Bright indicator bulb lights if continuity exists.

• Requires (2) AAA batteries (not included).

Heavy-Duty Continuity Tester & FlashlightTests for continuity in non-energized circuits.

• Lighted flashlight tip indicates circuit continuity.

• Pocket clip can be positioned as a probe in tight spots.

• 26" long test lead with alligator clip probe.

• Doubles as a pocket flashlight.

• Durable, metal construction.

• Requires (2) AA batteries (not included).

WarrantyOne Year

WarrantyOne Year

GCT-204

GFT-200

Testers Section 9/7/05 1:21 PM Page 142

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

143

Circuit Alert™ Non-Contact Voltage DetectorIndicates the presence of AC Voltage from 50 - 600 V.

• Visual (flashing) and audible (beeping) indicators signal presence of voltage, by pressing pocket clip.

• Built-in “safe test” feature assures batteries are operating properly.

• Compact design fits in shirt pocket.

• Operates from 2-LR44 1.5 Volt batteries (included).

• Patented.

Live-Wire™Adjustable sensitivity detects the presence of ACVoltage from 12 - 600 V without contacting wires.

• Visual (flashing) and audible (beeping) indicators signal presence of voltage.

• Adjustable sensing levels.

• Built-in “safe test” feature assures batteries are operating properly.

• Textured grip for added comfort.

• Operates from 2-LR44 1.5 Volt batteries (included).

WarrantyFive Year

In-Wall Pipe & Wire DetectorLocates metal objects and live unshieldedconductors behind drywall, paneling and plaster walls.

• Detects voltage from 50 - 600 V AC.

• Visual and audible indicators.

• Adjustable sensitivity.

• Operates from (1) 9 Volt battery (included).

WarrantyOne Year

GVD-504A

GVD-505A

GPD-902

Non-Contact Voltage TestersComparison Chart

Feature GVD-504A GVD-505A GPD-902

Detection Range 50-600 V AC 12-600 V AC 50-600 V AC

Visual Audible Adjustable Sensitivity Detects Metal Pocket Clip UL / cUL Warranty 5 5 1

Batteries (2) Button (2) Button 9 Volt(included) Cells Cells

*Patents Pending

CAT lll

WarrantyFive Year

CAT lll

600 V

600 V

Testers Section 9/7/05 1:21 PM Page 143

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

144

Receptacle Tester & Circuit AnalyzerTests standard receptacles to ensure proper wiring.

• Neon indicators give positive indication of circuit status.

• Compact unit simply plugs into any standard 3-wire/grounded receptacle (110 - 125 V AC circuits).

• Tests for six circuit conditions: open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring.

• Succession of yellow and red lights provides indication of circuit status or specifies wiring errors.

• Easy-to-read three views – top, side and bottom.

®

WarrantyOne Year

Ground Fault Receptacle Tester & Circuit AnalyzerTests ground fault receptacles by overloadingcircuit and tripping GFCI.

• Easy to use. Simply plug tester into any circuitprotected by a ground fault receptacle (110 - 125 V AC) and press black button to overload circuit.

• Tests for seven conditions: ground faultinterruption, open ground, open neutral, openhot, hot/ground reverse, hot/neutral reverse andcorrect wiring.

• Succession of yellow and red lights providesindication of circuit status or specifies wiring errors.

• Tester trips GFCI between 6 - 9 mA.

®

WarrantyOne Year

WarrantyFive Year

Receptacle Testers / AnalyzersComparison Chart

Tests for: GRT-500A GFI-501A GRT-800

Open Ground Open Neutral Open Hot Hot / Ground Reversed Hot / Neutral Reversed Correct Wiring GFCI Test Function Low Ground Resistance Warranty 1 year 1 year 5 year

GRT-500A

GRT-800

GFI-501A

Sure Wire™ Branch Circuit AnalyzerTests receptacle wiring and grounding in standardand GFCI outlets.

• Advanced circuitry tests for proper low resistance grounding.

• Operates on live 120 V circuits.

• Simple push-button operation tests receptaclesconnected to ground fault-protected circuits forproper operation.

• Detects seven common wiring conditions:normal, bad ground, open neutral, reversedhot/neutral, reversed hot/ground, open hot, andground fault interruption.

• Patented.

Testers Section 9/7/05 1:21 PM Page 144

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

145

Circuit Tracker™Easily locates circuits without turning off breakers or fuses.

• Easy to use with transmitter plugged into live 120 V outlet.

• Audible and visual indicators.

• Magnetic back and long probe lead keeps tester at eye and ear level for easy identification.

• Exclusive probe design and impact-resistant Soft-grip™housing improves use and durability.

• Built-in battery-strength indicator.

• Uses 9 V battery (not included).

• With GET-1200AS adapter kit, can also be used to identify light bulb sockets and light switches.

• Patented.

WarrantyFive Year

GET-1200

Circuit Tracker™ Adapter SetUsed with GET-1200 transmitter to locate circuit breakers orfuses, controlling light fixtures, switches or any bare wires.

• Fully insulated alligator clips.

• Use with 110 - 125 V AC circuits.

WarrantyOne Year

GET-1200AS

Item’s notsold separately

Testers Section 9/7/05 1:21 PM Page 145

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

146

Qty Part # Description

1 GET-4110R Receiver

1 GET-4110T Tone Generator

GET-4110K Kit Contains:

Lan Tracker™Traces any unshielded and unenergized wire or cable.

• Four transmitter plugs encased inside closeable hatch:

- RJ-11 - Alligator Clip

- Coax - RJ-45

• Detects unshielded wires up to 12", when using ground clip.

• Adjustable sensitivity detects wires in close proximity.

• L.E.D. intensifies as the signal gets stronger.

• Audible feature differentiates transmitter signal from other signals.

• Requires; (2) AA batteries for transmitter (included)(3) 1.5 V LR-44 batteries for receiver (included)

• Patented.

datacom

WarrantyFive Year

Qty Part # Description

1 GET-4220R Receiver

1 GET-4220T Tone Generator

GET-4220K Kit Contains:

Slim Ergonomic Receiver

Unenergized Electrical Wires

Voice & Data Lines Coaxial Cables

GET-4110K

GET-4220K

datacom

WarrantyFive YearWire Tracker™

Traces any unshielded and unenergized wire or cable.

• Four transmitter plugs encased inside closeable hatch:

- RJ-11 - Alligator Clip

- Coax - Automotive Fuse

• Detects unshielded wires up to 12", when using ground clip.

• Adjustable sensitivity detects wires in close proximity.

• L.E.D. intensifies as the signal gets stronger.

• Audible feature differentiates transmitter signal from other signals.

• Requires; (2) AAA batteries for transmitter (included)(3) 1.5 V LR-44 batteries for receiver (included)

• Patented.

Testers Section 9/7/05 1:21 PM Page 146

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

147

Analog MultimetersFeature GMT-12A GMT-18A GMT-19A

AC Voltage 500 1000 1000

DC Voltage 500 1000 1000

AC Amps — — —

DC Amps 250 mA 250 mA 10 A

Ohms 1 Meg 10 Meg 10 Meg

Decibels -20 to +56dB -20 to +62dB -8 to +62dB

Fuse 250 mA 2 A 2 A

Accuracy ±5% ±5% ±5%

Audible Continuity Check Manual Range Selection Total Ranges 12 14 19

Battery Test Handle / Bench Stand cUL / CSA Warranty 1 yr 1 yr 1 yr

Full family of analog multimeters test ACVoltage, DC Voltage, DC Current, Resistance,Continuity, and batteries.

• Manual range selection.

• Easy to read, color-coded analog displays.

• All testers include batteries, test leads, sparefuse and operating instructions.

• All are cULus approved and incorporate fuseoverload protection circuitry.

Six Function,19-Range Multimeter

GMT-19A Tester Specifications

DC Voltage 2.5, 10, 50, 250, 1000 V

AC Voltage 10, 50, 250, 1000 V

DC Current 5m, 50m, 500m, 10A

Resistance 10 MΩ

Decibels -8dB to +62dB on AC V

Battery Test 1.5 V and 9 V

Accuracy DC Voltage ±4%

AC Voltage ±5%

Resistance ±4° Arc of Full Scale

Sensitivity 20,000 Ω per Volt DC

8,000 Ω per Volt AC

Six Function,14-Range Multimeter

GMT-18A Tester Specifications

DC Voltage 2.5, 50, 250, 1000 V

AC Voltage 10, 50, 250, 1000 V

DC Current 10m, 250m A

Resistance 10 MΩ

Decibels -20dB to +62dB

Battery Test 1.5 and 9 V

Accuracy DC Voltage ±4%

AC Voltage ±5%

Resistance ±4° Arc of Scale Length

Sensitivity 10,000 Ω per V DC

4,000 Ω per V AC

GMT-12A

Five Function,12-Range Multimeter

GMT-12A Tester Specifications

DC Voltage 10, 50, 250, 500 V

AC Voltage 10, 50, 250, 500 V

DC Current 0.5m, 50m, 250m A

Resistance 1 MΩ

Decibels -20dB to 56dB on AC V ranges

Accuracy DC Voltage ±4%

AC Voltage ±5%

Resistance ±4° Arc of Scale of Length

Sensitivity 2000 Ω per Volt AC and DC

Comparison Chart

WarrantyOne Year

WarrantyOne Year

GMT-18A GMT-19A

WarrantyOne Year

Testers Section 9/7/05 1:21 PM Page 147

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

148

Digital MultimetersFull family of digital multimeters test AC Voltage, DCVoltage, DC Current, Resistance, Continuity,Capacitance, Frequency and Temperature.

• Manual and autoranging styles.

• Easy to read digital displays.

• All testers include batteries, test leads and operating instructions.

• All are cULus approved and incorporate fuse overloadprotection circuitry.

Ten Function,32-Range Digital Multimeter

Five Function,19-Range Digital Multimeter

GDT-185A

WarrantyOne Year

Four Function, 6-RangeDigital Multimeter

GDT-185A Tester Specifications

DC Voltage 20, 200 V

AC Voltage 500 V

DC Current 200 mA

Resistance 2,000k Ω

Accuracy DC Voltage ±1%

AC Voltage ±2%

Resistance ±2%

GDT-200A Tester Specifications

DC Voltage 200m, 2000m, 20, 200, 500 V

AC Voltage 200, 500 V

DC Current 2000µ, 20m, 200m, 10 A

Resistance 2M Ω

Temperature 1832 °F

Accuracy DC Voltage ±0.5%

AC Voltage ±1.2%

DC Current ±2%

Resistance ±1%

Temperature ±3%

GDT-292A Tester Specifications

DC Voltage 200m 2, 20, 200, 1000 V

AC Voltage 2, 20, 200, 700 V

DC Current 20µ, 200µ, 2m, 20m, 200m, 2, 10 A

AC Current 20µ, 200µ, 2m, 20m, 200m, 2, 10 A

Resistance 2k,20k 200k, 2M, 20M, 200M Ω

Input Impedance 2M Ω

Accuracy DC Voltage ±0.5%

AC Voltage ±0.8%

DC Current ±0.8%

AC Current ±1.2%

Resistance ±0.8%

Seven Function,19-Range Digital Multimeter

WarrantyFive Year

WarrantyOne Year

GDT-190A Tester Specifications

DC Voltage 200m, 2000m, 20, 200, 600 V

AC Voltage 200, 500 V

DC Current 200µ, 2000µ, 20m,200m, 10 A

Resistance 2M Ω

Accuracy DC Voltage ±0.7%

AC Voltage ±1.2%

DC Current ±1.5%

Resistance ±1%

WarrantyOne Year

Testers Section 9/7/05 1:21 PM Page 148

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

149

Feature GDT-185A GDT-190A GDT-200A GDT-292A GDT-293A GDT-294A GDT-295A

AC Voltage 500 500 500 700 700 750 750

DC Voltage 200 600 500 1000 1000 1000 1000

AC Amps — — — 10 A 10 A 10 A 10 A

DC Amps 200 mA 10 A 10 A 10 A 10 A 10 A 10 A

Ohms 2000 K 2 Meg 2 Meg 20 Meg 20 Meg 40 Meg 32.6 Meg

Fuse 200 mA 2 A 2 A 0.2 A 2 A 10 A 10 A

UL / cUL / CSA Audible Continuity Buzzer Auto-Ranging Manual Range Selection Total Ranges 6 19 19 32 32 29 32

Capacitance Transistor Gain Diode Check Data Hold Auto Polarity Frequency Temperature Bar Graph Handle / Bench Stand Auto Power Off Low Battery Indication Warranty 1 yr 1 yr 1 yr 5 yr 5 yr 5 yr 5 yr

Comparison Chart

15 Function,32-Range Auto-RangingDigital Multimeter

13 Function,29-Range Auto-RangingDigital Multimeter

13 Function,32-Range Digital Multimeter

WarrantyFive Year

WarrantyFive Year

WarrantyFive Year

GDT-294A Tester Specifications

DC Voltage 400m, 4, 40, 400, 1000 V

AC Voltage 400m, 4, 40, 400, 750 V

DC Current 400µ, 4m, 40m, 400m, 10 A

AC Current 400µ, 4m, 40m, 400m, 10 A

Resistance 400, 4k, 40k, 400k, 4M, 40M

Input Impedance 10M Ω

Accuracy DC Voltage ±0.5%

AC Voltage ±0.8%

DC Current ±0.8%

AC Current ±1.2%

Resistance ±0.8%

GDT-293A Tester Specifications

DC Voltage 200m 2, 20, 200, 1000 V

AC Voltage 2, 20, 200, 700 V

DC Current 2m, 20m, 200m, 10 A

AC Current 2m, 20m, 200m, 10 A

Resistance 200, 2k, 20k, 200k, 2M,

20M, 200M

Capacitance 2n, 20n, 200n, 2µ, 20µ

Temperature -122 °F to 1832 °F

Input Impedance 2M Ω

Accuracy DC Voltage ±0.5%

AC Voltage ±0.8%

DC Current ±0.8%

AC Current ±1.2%

Resistance ±0.8%

Capacitance ±2.5%

Temperature ±0.75%

GDT-295A Tester Specifications

DC Voltage 32m, 3.26, 32.6, 326, 1000 V

AC Voltage 3.26, 32.6, 326, 750 V

DC Current 326µ, 3260µ, 32.6m, 326m, 10 A

AC Current 326µ, 3260µ, 32.6m, 326m, 10 A

Resistance 326, 3.26k, 32.6k, 326k, 3.26M, 32.6M Ω

Capacitance 326n, 32.6µ Farads

Frequency 32.6k, 200 kHz

Input Impedance 10M Ω

Accuracy DC Voltage ±0.3%

AC Voltage ±0.8%

DC Current ±1.2%

AC Current ±1.5%

Resistance ±0.8%

Capacitance ±3.0%

Frequency ±1.2%

Testers Section 9/7/05 1:21 PM Page 149

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

150

Clamp-On MultimetersFeature GCM-500 GCM-221 GCM-600 GCM-620

Analog or Digital Analog Digital Digital Digital

AC Voltage 600 600 600 600

DC Voltage 60 — 600 600

AC Amps 600 600 600 1000

DC Amps — — — 1000

Ohms 1 Meg 200 200 400

Fuse 500 mA — — —

UL / cUL Continuity Audible Buzzer Frequency Auto-Ranging Manual Range Selection Total Ranges 8 3 6 11

Data Hold Jaw Size 11⁄2" 11⁄4" 11⁄2" 11⁄2"

CAT Rating CATIII CATIII600 V 600 V

Full family of clamp meters test ACCurrent, AC Voltage, DC Voltage,Resistance and Continuity (DC Currentmeasured with model GCM-620).

• Manual and autoranging styles.

• Easy-to-read displays.

• All testers include batteries, test leadsand operating instructions.

• All are cULus or CE approved.

• Models GCM-600 and GCM-620 aresized to clamp around one 750 mcmcable or two 350 mcm cables.

Comparison Chart

Patented

WarrantyOne Year

WarrantyOne Year

WarrantyFive Year

AC Clamp Meterw/LockjawFeature

Auto-RangingDigital ClampMeter

Digital Clamp Meter

True RMSClamp Meter

GCM-500 Tester Specifications

DC Voltage 60 V

AC Voltage 60, 300, 600 V

AC Current 6, 60, 600 A

Resistance 10M Ω

Accuracy ±5%

GCM-221 Tester Specifications

AC Voltage 600 V

AC Current 600 A

Resistance 200 Ω

Accuracy AC Voltage ±1.5%

AC Current ±2.0%

Resistance ±1.0%

GCM-600 Tester Specifications

DC Voltage 600 V

AC Voltage 200, 600 V

AC Current 200, 600 A

Resistance 200 Ω

Accuracy DC Voltage ±1%

AC Voltage ±1%

AC Current ±2%

Resistance ±1%

GCM-620 Tester Specifications

DC Voltage 400, 600 V

AC Voltage 400, 600 V

AC Current 400, 1000 A

DC Current 400, 1000 A

Resistance 400 Ω

Frequency 1-10 KHz

Accuracy DC Voltage ±1.5%

AC Voltage ±1.2%

AC Current ±2.5%

Resistance ±0.8%

Frequency ±1.0%

CAT lll

WarrantyFive Year

CAT lll

Testers Section 9/7/05 1:21 PM Page 150

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

151

AC Current Line Splitter For UseWith Clamp Meters Separates the hot and neutral conductors of powercords when testing AC amperage draw.

• Receptacles are built-in for testing voltage.

• x1 and x10 holes for accurate testing.

WarrantyOne Year

Analog Battery TesterTests all common batteries to determine if they arecharged or need replacement.

• Tests from 1.5 V button cells to 22.5 V photo cells.

• Includes test leads for easy testing.

• Tests:-AA, AAA, C, D, N -1.5 V button cells-1.25 V Ni-Cad rechargeable -3 V lithium-22.5 V photo & lantern cells -6 V lantern-12 V, 15 V Photo cells -9 Volt

WarrantyOne Year

GBT-500A

Single Telephone Line TesterTroubleshoots common problem conditions withstandard single-line telephone hook-ups.

• Compact unit easily plugs into any single-line telephone jack.

• Bright L.E.D. can be read from any angle.

• Tests for three wiring conditions: correct, reversed and AC voltage presence.

LED Color Line Status

Green Line OK

Red Reversed Line

Amber AC Voltage Present

Not Lit Dead Line

Dual Telephone Line TesterTroubleshoots common problem conditions withstandard single or dual-line telephone hook-ups.

• Compact unit easily plugs into any single or dual-line telephone jack.

• Bright L.E.D.s can be read from any angle.

• Tests for three wiring conditions: correct, reversed and AC voltage presence.

WarrantyOne Year

GTT-100

GTT-200

GCM-LS

datacom

CAT lll

WarrantyOne Year

datacom

CAT lll

LED Color Line Status

Green Line OK

Red Reversed Line

Amber AC Voltage Present

Not Lit Dead Line

600 V

600 V

Testers Section 9/7/05 1:21 PM Page 151

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

152

Audible Stud Seeker™Locates wood or metal studs behind drywall up to 3⁄4".

• Metal marking scribe marks stud edges without a pencil.

• Built-in bubble vial level.

• Visible and audible indicators ensure accuracy.

• Bright L.E.D.s indicate stud edge.

• Patented.

WarrantyOne Year

GSS-510A

Test LeadsReplacement leads for Gardner Bender meters.

• Tough ABS construction.

• Flexible cords for easy use.

Part # Description Models

RTL-103 Small Test Leads GMT--19A, GDT-11, GDT-190A, GDT-200A

RTL-107 Push-on Alligator Clips RTL-103, RTL-108, RTL-200

RTL-108 Mid-size Test Leads GMT-12A, GMT-18A

RTL-200 Large Test Leads GDT,292A, GDT-293A, GDT-294A, GDT-295A,GCM-500, GCM-221, GCM-600 & GCM-620

RTL-103

RTL-107

RTL-108RTL-200

Testers Section 9/7/05 1:21 PM Page 152

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

153

Replacement Parts and AccessoriesTest Instruments

10A/25

0V

0.5A/25

0V

2.0A/25

0V

0.2A/25

0V

0.25A

/250V

RTL-103

RTL-108

RTL-200

Batte

ries

Model

Analog Multimeters

GMT-12A (1) AA

GMT-18A (1) AA

GMT-19A (2) AA

Digital Multimeters

GDT-185A (2) 1.5 V SR44, LR44

GDT-11 (1) 9 Volt

GDT-190A** (1) 9 Volt

GDT-200A (1) 9 Volt

GDT-292A (1) 9 Volt

GDT-293A (1) 9 Volt

GDT-294A (1) 9 Volt

GDT-295A (1) 9 Volt

Clamp-On Meters

GCM-500 (1) AA

GCM-221 (2) AAA

GCM-600 (1) 9 Volt

GCM-620 (1) 9 Volt

Probe Testers

GCT-204 (2) AAA

GCT-304A (2) AA

GCV-206 (2) 1.5 V SR44, LR44

GET-1200 (1) 9 Volt

GET-207 (1) A27 12 Volt

GET-4110K (2) AAA & (3) LR44

GET-4220K (2) AAA & (3) LR44

GFT-200 (2) AA

GPD-902 (1) 9 Volt

GVC-1000 (3) AAA

GVC-300 (2) 1.5 V SR44, LR44

GVD-504A (2) 1.5 V SR44, LR44

GVD-505A (2) 1.5 V SR44, LR44

GVT-92 NA

FUSES LEADS

Testers Section 9/7/05 1:21 PM Page 153

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax 414.352.2377CANADA 905.564.5749 | fax 905.564.0305 | www.gardnerbender.com

154

NOTES

Testers Section 9/7/05 1:21 PM Page 154