Outdoor Furniture - Technical Documentation...Erlau Outdoor Furniture Technical Documentation | Table of contents Benches 02 Alpha 03 Artesit 04 Avenida 16 Charisma 05 Esplanade 06

Erlau Outdoor FurnitureTechnical Documentation | Table of contents

Benches

02 Alpha03 Artesit04 Avenida16 Charisma05 Esplanade06 Melody07 Molero08 Piazza10 Salto12 Schwarzwald13 Siesta14 Stella16 Strada18 Viamona

Seats and seating systems

19 Allegro, stainless steel21 Allegro, steel23 Allegro-Vario23 Arena25 Enano26 Exposit40 Intersit28 Multi, steel29 Multi, stainless steel45 Olympia Nova53 Swingo30 Topsit-Pagwood®

31 Topsit, wire mesh32 Topsit, perforated plate34 Topsit-Pagwood® backless35 Topsit, wire mesh, backless36 Topsit, on trapezoid frame38 Topsit-Vario

Loungers, chairs, stackable benches and tables

54 Bornholm55 Elba56 Florenz57 Mensa Nova55 Offenburg56 Omega58 Parador56 Rothenburg 57 Tabula Nova 58 Tivoli56 Triberg

Bicycle parking systems

59 Arcodos60 Berlin61 Pedalo63 Pedalo Hi-Lo65 Velofox67 Veloport

Planters

68 Lunaflor69 Planta

Bollards | Leaning post

70 Arcus74 Metro72 Unisono

Litter bins

75 Cambio83 Community84 Smoky84 Splash83 Topsy76 Vasura

Renovation and replacement

85 Olympia88 Replica

Warming column

90 Brasero

ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com

Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.

02

AlphaALPHA BenchFlat steel laser-cut side-frames, separate wire-mesh seat and backparts, 15 x 30 mm mesh pattern, wire gauge 3.5 mm. Feet of 38mm round tube in ALPHA-form, fully galvanized and RILSANpolyamide coated, (min. thickness 350 microns). With four broadstripes of denser mesh to indicate the seating spaces and for extrastrength.

ALPHA features:One-piece combined feet and armrest design. Can be bolted/doweled to the ground/into foundations.

Dimensions: (W x D x H) 1980 x 610 x 800Type movable / fixed

ALPHA Pagwood® benchFlat steel section laser-cut side-frames, separate Pagwood® slattedseat and back parts. Feet of 38 mm round tube in ALPHA-form,fully galvanized and RILSAN polyamide coated, (min. thickness350 microns).

ALPHA features:One-piece combined feet and armrest design. Can be bolted/dow-eled to the ground/into foundations.

Dimensions: (W x D x H) 1980 x 610 x 800Type movable / fixed

Benches

When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com

Technische Änderungen vorbehalten.

Benches03

We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com

Artesit

ARTESIT benchSeat section galvanized and RILSAN polyamide coated (min. thick-ness 350 microns), moulded concrete block supports, ground andsand-blasted to give anthracite finish. 38 mm diameter tubular steel seat frame, wire mesh seat and backrest, 15 x 15 mm meshpattern, wire gauge 3.0 mm, seat height 450 mm.

ARTESIT features:Supporting stone blocks can be positioned horizontally or vertically.

Option 1Seat length 1800 mm, asymmetric backrest. Asymmetrical sloping of the ends, length 2000 mm.

Dimensions: (W x D) 2190 x 620 mm

Order no. 51563

Option 2Seat length 2400 mm, symmetric backrest. Symmetrical sloping of both ends, length 2400 mm.

Dimensions: (W x D) 2400 x 605 mm

Order no. 51567


04 Benches


AvenidaAVENIDA benchFlat steel laser-cut side-frames, one-piece wire-mesh seat and back,15 x 15 mm mesh pattern, wire gauge 3.0 mm diameter weldedonto 38 mm round tube. Mounted on sturdy arched feet, com-pletely galvanized and RILSAN polyamide coated (min. thickness350 microns). With two broad stripes of denser mesh to indicatethe seating spaces and for extra strength.

AVENIDA features:Ergonomic design with a slightly curved knee roll on the seat anda contoured backrest top. Flanged feet can be dowelled/bolted tothe ground / into foundations.

Dimensions: (W x D x H) 1900 x 635 x 820 mm


05 Benches


Option 1ESPLANADE benchTubular steel frame, external tube diameter 38 mm, galvanized and RILSAN polyamide coated, with Pagwood® slats.

Type Model 1800, 3-seaterDimensions: (W x D x H) 1800 x 720 x810 mm, seat height 450 mm

fixed movableOrder no. 51536 51214

Option 2ESPLANADE bench in stainless-steelTubular steel frame, external tube diameter 38 mm, silk-matt pol-ished surface, with Pagwood® slats.

Type Model 1800, 3-seaterDimensions: (W x D x H) 1800 x 720 x810 mm, seat height 450 mm


Option 3ESPLANADE bench, without backrestTubular steel frame, external tube diameter 38 mm, with tubularsafety bar at the back, galvanized and RILSAN polyamide coated,with Pagwood® slats.

Type Model 1800, 3-seaterDimensions: (W x D x H) 1800 x 652 x 548 mm, seat height 450 mm


Option 4ESPLANADE bench, without backrest, back to backTubular steel frame, external tube diameter 38 mm, with tubularsafety bar in the middle, galvanized and RILSAN polyamide coated,with Pagwood® slats.



Option 5Armrests for ESPLANADEExternal tube diameter 38 mm.

Per pair Steel Stainless-steelOrder no. 58530 5853024

Option 6Floor mounting bracket for ESPLANADE, movable(Two required per bench)Order no. 59630

Option 7Feet with boreholes (see PIAZZA, pg. 9) For bolting the bench tothe ground (customer provides bolts and dowels).

Esplanade


06

Melody

Benches


623

402

451 61

5790

MELODY benchFlat steel section side-frames, separate wire-mesh seat and backparts, 15 x 30 mm mesh pattern, wire gauge 3.5 mm; MELODY-style, laser cut, sheet-steel feet and armrests; fully galvanized and RILSAN polyamide coated, (min. thickness 350microns). With four broad stripes of denser mesh to indicate theseating spaces and for extra strength. Stainless steel foot ends.

MELODY features:One-piece combined foot and armrest design. Can be bolted/dowelled to the ground / into foundations.


MELODY Pagwood® benchFlat steel section side-frames, separate Pagwood® slatted seat and back parts; Melody-style, laser-cut and shaped sheet-steel feet andarmrests; fully galvanized and RILSAN polyamide coated, (min.thickness 350 microns). Stainless steel foot ends.

MELODY features:One-piece combined foot and armrest design.Can be bolted/dowelled to the ground / into foundations.


Melody-Therm benchFlat steel laser-cut side-frames, separate Pagwood® slatted seatand back parts; laser-cut sheet-steel feet and armrests, fully galva-nized and RILSAN polyamide coated (min. thickness 350 microns).Stainless steel foot ends.

MELODY-Therm features:The seat, and upon request also the backrest, is fitted with aninfrared heater that is embedded in the individual Pagwood®

slats from below, making it splash-proof. Weatherproof to IP X4,protection class II. Actual gain in warmth, approx. 15° C (59° F).

Heating output, approx. 200 watts per seat and back element.230 volt AC supply, wiring box with PG9 cable screw connectionprovided. Connection via 2-wire 1.5 mm2 non-metallic sheathedcable to an appropriate outlet box.

Electromagnetic tested according to EN 50366

TÜV certified, and manufactured to DIN EN ISO 9001.The benches can be operated in outdoor temperatures up to +18°C (+ 64.4° F) without additional thermostatic controls.



Benches07


MoleroCast aluminium

MoleroCast aluminium seat, back and feet, extremely strong and stableconstruction, designed with a slightly curving shape for greaterseating comfort. Coloured powder coating, white aluminium asstandard.

Dimensions:(L x W x H) 1540 x 428 x 420 mm, seat height 406 mm


08 Benches


Piazza®

Option 1PIAZZA benchTubular steel and wire mesh, external tube diameter 38 mm, wiregauge 3.0 mm, mesh pattern 15 x 15 mm, galvanized and RILSANpolyamide coated (min. thickness 350 microns). New broad-stripeddenser mesh for greater strength and seat division. Feet of movablemodel fitted with plastic gliders.




fixed movable fixed with round baseOrder no. 58833 58823

Option 2PIAZZA bench in stainless-steelTubular steel and wire mesh, external tube diameter 38 mm, wiregauge 3.5 mm, mesh pattern 15 x 15 mm, wire ends are welded to the inner sides of the tubes by a new method. Feet of movable model fitted with plastic gliders.



658

810

547

451


Benches09


937

448

548

1638

1693

1800

713

fixed

548

1800516

652

448

movable

Option 3Armrests for PIAZZAExternal tube diameter 38 mm, galvanized and RILSAN polyamide coated.

Per pair Steel Stainless-steelOrder no. 58530 5853024

Option 4Floor mounting bracket for PIAZZA, movable(Two required per bench)Order no. 59630

Option 5Feet with boreholes for movable foot typeFor bolting the bench to the ground (customer provides bolts and dowels)

movable 1800 mm, 3-seaterOrder no. 51775 4 holes per bench

Option 6PIAZZA bench, without backrestTubular steel and wire mesh, external tube diameter 38 mm, wiregauge 3.0 mm, mesh pattern 15 x 15 mm, with tubular safety bar at the back, galvanized and RILSAN polyamide coated (min. thick-ness 350 microns). New broad-striped denser mesh for greater strength and seat division.

Type Model 1800, 3-seaterDimensions: (W x D x H) 1800 x 652 x 548 mm, seat height 450 mm.


Option 7PIAZZA bench, without backrest, back to backTubular steel and wire mesh, external tube diameter 38 mm, wiregauge 3.0 mm, mesh pattern 15 x15 mm, with tubular safety bar in the middle, galvanized and RILSAN polyamide coated (min. thickness 350 microns). New broad-striped denser mesh forgreater strength and seat division.

Type Model 1800, 3-seaterDimensions: (W x D x H) 1800 x 937 x 548 mm, seat height 450 mm.



10 Benches


SaltoSALTO benchFlat steel section side-frames, separate wire-mesh seat and back parts, 15 x 30 mm mesh pattern, wire gauge 3,5 mm, laser-cut and chamfered steel feet, fully galvanized and RILSANpolyamide coated, (min. thickness 350 microns).With four broad stripes of denser mesh to indicate the seatingspaces and for extra strength. Stainless steel foot ends.

SALTO features:Foot elements and arm rests of strong but elegant laser-cut parts,and bent into beautiful shapes with new bending technology.

Can be bolted / dowelled to the ground / into foundations (customer provides bolts and dowels).


SALTO Pagwood® benchFlat steel section side-frames, separate Pagwood® slatted seat and back parts, laser-cut and chamfered steel feet, fully galvanized and RILSAN polyamide coated, (min. thickness 350 microns).Stainless steel foot ends.

SALTO features:Foot elements and arm rests of strong but elegant laser-cut parts,and bent into beautiful shapes with new bending technology.



SALTO-Therm benchFlat steel laser-cut side-frames, separate Pagwood® slatted seatand back parts, feet and armrests of laser-cut steel, fully galva-nized and RILSAN polyamide coated (min. thickness 350 microns).Stainless steel foot ends.

SALTO-Therm features:The seat, and upon request also the backrest, is fitted with aninfrared heater that is embedded in the individual Pagwood®

slats from below, making it splash-proof. Weatherproof to IP X4,protection class II. Actual gain in warmth, approx. 15° C (59° F). Heating output, approx. 200 watts per seat and back element. 230 volt AC supply, wiring box with PG9 cable screw connectionprovided.Connection via 2-wire 1.5 mm2 non-metallic sheathed cable to anappropriate outlet box.

Electromagnetic tested according to EN 50366, TÜV certified, andmanufactured to DIN EN ISO 9001.The benches can be operated in outdoor temperatures up to +18°C (+ 64.4° F) without additional thermostatic controls.


518465

605

456 61

7795


Benches11


454

462

490

648

499SALTO bench, without backrest, wire meshFlat steel section side-frames, wire-mesh seat and back parts, 15 x 30 mm mesh pattern, wire gauge 3,5 mm, laser-cut and chamfered steel feet, fully galvanized and RILSAN polyamide coated, (min. thickness 350 microns).With four four broad stripes of denser mesh to indicate the seat-ing spaces and for extra strength. Stainless steel foot ends.

SALTO features:Arm rests of strong but elegant laser-cut parts, and bent into beautiful shapes with new bending technology.



SALTO bench, without backrest, Pagwood®

Flat steel section side-frames, Pagwood® slatted seat, laser-cut andchamfered steel feet, stainless-steel foot ends.

SALTO features:Arm rests of strong but elegant laser-cut parts, and bent into beautiful shapes with new bending technology.

Can be bolted/dowelled to the ground / into foundations (customer provides bolts and dowels).


SALTO-Therm bench, without backrestFlat steel laser-cut side-frames, Pagwood® slatted seat, feet andarmrests of laser-cut steel, fully galvanized and RILSAN polyamidecoated (min. thickness 350 microns). Stainless steel foot ends.

SALTO-Therm features:The seat is fitted with an infrared heater that is embedded in theindividual Pagwood® slats from below, making it splash-proof.Weatherproof to IP X4, protection class II. Actual gain in warmth, approx. 15° C (59° F). Heating output, approx. 200 watts per seat element. 230 volt ACsupply, wiring box with PG9 cable screw connection provided.Connection via 2-wire 1.5 mm2 non-metallic sheathed cable to anappropriate outlet box.

Electromagnetic tested according to EN 50366.

TÜV certified, and manufactured to DIN EN ISO 9001.

The benches can be operated in outdoor temperatures up to+18°C (+ 64.4° F) without additional thermostatic controls.



12 Benches


SchwarzwaldOption 1SCHWARZWALD park bench, 4-seaterTubular steel frame, external tube diameter 34 mm, wire meshseat and backrest, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, galvanized and RILSAN polyamide coated (min. thickness 350microns). New broad-striped denser mesh for greater strength andseat division. Flanged feet for fixed mounting.

Dimensions: (W x D x H) 2000 x 705 x 820 mm, seat height 450 mm

Type fixed movableOrder no. 58703 51749

Option 2SCHWARZWALD park bench, 4-seater, without backrestTubular steel frame, external tube diameter 34 mm, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, galvanized and RILSANpolyamide coated (min. thickness 350 microns). New broad-stripeddenser mesh for greater strength and seat division. Flanged feet for fixed mounting.

Dimensions: 2000 mm long, 600 mm deep, seat height 450 mm

Type fixed movableOrder no. 52013 52245

Option 3SCHWARZWALD seat or backrestTubular steel frame, external tube diameter 34 mm, wire meshseat or back rest, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, galvanized and RILSAN polyamide coated (min. thickness 350microns).

Dimensions: (W x D x H) 2000 x 430 x 100 mm.

Type fixedOrder no. 58708

Welded fastening lugs for mounting on supports with spacersfrom option 4.

Option 4Fastening components for SCHWARZWALD seats or backrests.Set of 4, laterally adjustable, to fit existing, purpose made substructures.

Order no. 58707*4 components required per multi seat unit.

Option 5Spacer for SCHWARZWALD multi seat unitHot dip galvanized, for mounting on walls, tiered stages(4 components required per multi seat unit).

Without mounting accessories for wall-mountingOrder no. 5871717


Benches13


SiestaOption 1SIESTA park benchWith armrests and raised seat, 3-4 seater, tubular steel and wiremesh, external tube diameter 38 mm, wire gauge 3.0 mm, meshpattern 15 x 15 mm, galvanized and RILSAN polyamide coated (min. thickness 350 microns). New broad-striped denser mesh forgreater strength and seat division. Flanged feet for fixed mounting.


Type movable fixedOrder no. 56493 51955

Particularly suitable for the elderly and infirm


14

StellaSTELLA benchFlat steel laser-cut side-frames, one-piece wire-mesh seat and back,15 x 30 mm mesh pattern, wire gauge 3.5 mm. Feet and armrestsof laser-cut steel, fully galvanized and RILSAN polyamide coated(min. thickness 350 micron). With four broad stripes of densermesh to indicate the seating spaces and for extra strength.

STELLA features:One-piece combined feet and armrest design. One piece seat andback design. Wire mesh ends terminate inside Erlau’s special pro-file. Feet can be dowelled/bolted to the ground / into foundations.

Dimensions: (W x D x H) 1820 x 670 x740 mm

STELLA Pagwood® benchFlat steel laser-cut side-frames, Pagwood® slatted seat and back.Feet and armrests of laser-cut steel, fully galvanized and RILSANpolyamide coated (min. thickness 350 microns).

STELLA features:One-piece combined feet and armrest design. One-piece seat andback design. Feet can be dowelled/bolted to the ground / intofoundations.

Dimensions: (W x D x H) 1820 x 670 x740 mmType movable / fixed

STELLA-Therm bench Flat steel laser-cut side-frames, Pagwood® slatted seat and back.Feet and armrests of laser-cut steel, fully galvanized and RILSANpolyamide coated (min. thickness 350 microns).

Stella-Therm features:The seat and back elements are fitted with an infrared heater thatis embedded in the individual Pagwood® slats from below, makingit splash-proof. Weatherproof to IP X4, protection class II. Actualgain in warmth, approx. 15° C (59° F).

Heating output, approx. 200 watts per seat and back element. 230 volt AC supply, wiring box with PG9 cable screw connectionprovided. Connection via 2-wire 1.5 mm2 non-metallic sheathedcable to an appropriate outlet box.



The benches can be operated in outdoor temperatures up to + 18°C (+ 64.4° F) without additional thermostatic controls.

Feet can be dowelled / bolted to the ground / into foundations.


Type movable / fixed

Benches



Benches15

Stella-tubo benchFlat steel laser-cut side-frames, seat and back areas completely of25 mm diameter stainless steel tube, 2 mm ends. Feet and armrestsof laser-cut steel, fully galvanized and RILSAN polyamide coated(min. thickness 350 microns).

STELLA features:One-piece combined feet and armrest design. One-piece seat andback design. Feet can be dowelled/bolted to the ground / intofoundations.

Dimensions: (W x D x H) 1820 x 670 x740 mmType movable / fixed



16

Strada | CharismaSTRADA benchFlat steel laser-cut side-frames, wire-mesh seat and back surfaces,15 x 30 mm mesh pattern, wire gauge 3,5 mm, square tube feetand armrests, fully galvanized and RILSAN polyamide coated, (min. thickness 350 microns). With four broad stripes of densermesh to indicate the seating spaces and for extra strength.

STRADA features:One-piece combined foot and armrest design. One piece seat andback design. Wires terminate inside special ERLAU profiles, feet can be bolted/dowelled to the ground / into foundations.


Type movable / fixed (with stainless steel ground clips)

Strada Pagwood benchFlat steel section laser-cut side-frames, Pagwood® slatted seat andback surfaces. Square tube feet and armrests, fully galvanized andRILSAN polyamide coated (min. thickness 350 microns).

STRADA features:One-piece combined feet and armrest design One-piece seat andback design. Feet can be dowelled/bolted to the ground / intofoundations.Dimensions: (W x D x H) 1820 x 630 x740 mm


Strada-Therm benchFlat steel laser-cut side-frames, Pagwood® slatted seat and backsurfaces. Square tube feet and armrests, fully galvanized and RIL-SAN polyamide coated (min. thickness 350 microns).

STRADA-Therm features:The seat and back elements are fitted with an infrared heater thatis embedded in the individual Pagwood® slats from below, makingit splash-proof. Weatherproof to IP X4, protection class II. Actualgain in warmth, approx. 15° C (59° F).Heating output, approx. 200 watts per seat and back element. 230 volt AC supply, wiring box with PG9 cable screw connectionprovided. Connection via 2-wire 1.5 mm2 non-metallic sheathedcable to an appropriate outlet box.



The benches can be operated in outdoor temperatures up to + 18°C (+ 64.4° F) without additional thermostatic controls.

Feet can be dowelled / bolted to the ground / into foundations.



Benches


45

4

74

0

603

630

58

0

732

603

74

2

58

6

44

9

Strada Charisma


Benches17


STRADA-tubo benchFlat steel laser-cut side-frames, seat and back surfaces are formedentirely of stainless-steel tubing, 25 mm diameter, 2 mm wall thick-ness, square tube feet and armrests, fully galvanized and RILSANpolyamide coated, (min. thickness 350 microns).

STRADA features:One-piece combined foot and armrest design. One piece seat andback design. Wires terminate inside special ERLAU profiles, feet canbe bolted / dowelled to the ground / into foundations.Dimensions: (W x D x H) 1820 x 630 x 740 mm


CHARISMA benchFlat steel laser-cut side-frames, wire-mesh seat and back surfaces, 15 x 30 mm mesh pattern, wire gauge 3,5 mm, strong round-tubularfeet curving into the side frames, fully galvanized and RILSAN poly-amide coated, (min. thickness 350 microns). With four broad stripesof denser mesh to indicate the seating spaces and for extra strength.

CHARISMA features:One piece seat and back design. Wires terminate inside special ERLAUprofiles, feet can be bolted / dowelled to the ground / into foundations.Dimensions: (W x D x H) 1785 x 685 x 740 mm


Charisma Pagwood benchFlat steel section laser-cut side-frames, Pagwood® slatted seat andback surfaces. Round tube feet and armrests, fully galvanized andRILSAN polyamide coated (min. thickness 350 microns).

CHARISMA features:One-piece combined feet and armrest design. One-piece seat andback design. Feet can be dowelled / bolted to the ground / into foundations.Dimensions: (W x D x H) 1785 x 685 x 740 mm


Charisma-Therm benchFlat steel section laser-cut side-frames, Pagwood® slatted seat andback surfaces. Round tube feet and armrests, fully galvanized andRILSAN polyamide coated (min. thickness 350 microns). Seat and backelements fitted with infrared heating.

CHARISMA features:One-piece combined feet and armrest design. One-piece seat andback design. Feet can be dowelled / bolted to the ground / into foundations.Dimensions: (W x D x H) 1785 x 685 x 740 mm


CHARISMA-tubo benchFlat steel section laser-cut side-frames, seat and back areas completelyof 25 mm diameter stainless steel tube, 2 mm ends. Feet and armrestsof round tube, fully galvanized and RILSAN polyamide coated (min. thickness 350 microns).

CHARISMA features:One-piece combined feet and armrest design. One-piece seat andback design. Feet can be dowelled / bolted to the ground / into foundations.Dimensions: (W x D x H) 1785 x 685 x 740 mmType movable / fixed


18

Viamona®

VIAMONA bench with arm rests, movable2 mm stainless-steel perforated plate seat and back surfaces,square hole pattern, steel angle section combined feet/armrests,galvanized and powder-coated. Free standing feet, can be bolted /dowelled to the ground / into foundations.(Customer provides bolts and dowels).


Seat surface: Stainless steel, ground

Benches


800

630

622

800

622

VIAMONA bench without arm rests, movable2 mm stainless-steel perforated plate seat and back surfaces,square hole pattern, steel angle section feet, galvanized and powder-coated. Free standing, can be bolted / dowelled to theground / into foundations. (Customer provides bolts and dowels).


Seat surface: Stainless steel, ground


19

Allegro®

Allegro-made of stainless steel

Option 1ALLEGRO Lisbon multi seat unitOrder no. 5252300

On 50 x 50 mm square tube support, available with the foot designs: A fixed, B fixed with base plate, C movable.

Type Total length No.of feet

2-seater 1025 mm 23-seater 1600 mm 24-seater 2175 mm 25-seater 2750 mm 3



Option 2ALLEGRO seat SU(As option 1)For mounting on top of walls.

Order no. 5160024

Without accessories for mounting on top of walls

Option 3ALLEGRO seat SR, straight(Design as option 1)For wall-mounting.

Order no. 5160124

Without accessories for wall-mounting

Single seats with and without armrests

both sides left right without

Please note:

The armrests are welded to the seats thus they cannot be added later.

Armrests

both sides left right withoutOrder no. 5161324 5159824 5161424 5160524

ALLEGRO Lisbon stainless steel multi seat unitStainless steel seats, 30 mm tube diameter, 15 x 15 mm wire mesh pat-tern, 3.0 mm wire gauge, wire mesh welded to the inner sides of thetubes. (Patent applied for.)Dimensions: 450 mm wide, 600 mm deep, seat height ca. 450 mm.

Steel subframe, galvanized and coated. 50 x 50 mm supporting tube.

460

815

450

600

815

450

160

600

815

450

ca. 4

00

ca. 250

650

815

450

370

60

600

815

450

max. 275

295

1025

575

1600

1150

1725

2 sitzig

3 sitzig

450450 2175

1725

4 sitzig

2750

1150

5 sitzig

1150

Dimensions and types of fixing

A fixed B fixed with base plate

For fixing to walls For wall mounting

C movable

Also available on a curved supporting frame on request.


Seats and seating systems20


These ground sleeves are suitable for use with all multi seat units on 50 x 50 supporting tubes.

Ground sleeveOrder no. 5003665

Special ground sleeves are now available for temporarily removingthe multi seat unit. You need one ground sleeve for each foot.

Ground sleeve of grey cast-iron, treated with acrylic resin lacquer,300 mm long with lateral anchoring claws. Threaded ring and blindplug also of grey cast-iron, chrome-plated. Polyamide strain ring.

Use:• The ground sleeve is concreted in level with the ground.• The threaded ring and strain ring are slipped over

the lower end of the foot.• The foot of the bench is inserted into the ground sleeve.• The threaded ring is screwed tight.• When the bench is removed, the ground sleeve is sealed

with a blind plug.

Foot

Threaded ring

Strain ring

Ground sleeve

Foundation

Ground sleeve for foot design A supplied optionally. See description for the Exposit multi seat unit.


21

Allegro®



ALLEGRO- steel multi seat unitsSeat and subframe galvanized and RILSAN polyamide coated (min.thickness 350 microns). 30 mm tubular steel seat frame, 3.0 mm wiregauge, 15 x 15 mesh pattern.

With areas of denser mesh on each side for additional strength.

Dimensions: width 450 mm, depth 600 mm, height 450 mm

Option 4ALLEGRO - multi seat unitOrder no. 5252200




An installed height ofbetween 420 and 470 mm is possible with the fixeddesign (A). 470 mm, coupled with armrests, isparticularly suitable for theaged and infirm.

Option 5ALLEGRO SU seat(As option 1)For mounting on top of walls.

Order no. 56603


Option 6ALLEGRO SR seat(Design as option 1)For wall-mounting.

Order no. 51074





Option 7ALLEGRO seat, on curved oval supporting tubeSeat and subframe galvanized and RILSAN polyamide coated (min. thickness 350 microns), 30 mm tubular seat frame, 3.0 mmwire gauge, 15 x 15 mesh pattern. With areas of denser mesh oneach side for additional strength. Standard radius 1460 mm to centre of supporting tube. Seats facing inwards, radius 1120 mmto front edge of seat. Seats facing outwards, radius 1800 mm to front edge of seat.

Dimensions: width 450 mm, depth 600 mm, height 450 mm

Multi seat unit A B CNumber of Fixed Fixed Movableseats with base-

plate4 (900) Order no. 55641 55651 55661

8 (1800) Order no. 55642 55652 55662

12 (2700) Order no. 55643 55653 55663

16 (3600) Order no. 55644 55654 55664


both sides left right without side shelf

Please note:

The armrests are welded to the seats thus theycannot be added later.

Armrests/side shelf

both sides left right without side shelfOrder no. 56670 56690 56680 56600 51402

Option 8ALLEGRO seat, on radially curved oval supporting tube(Design as option 1)For supporting tube radius over 1460 mm. With your order,please enclose a plan showing the radii, dimensions of arcs anddesired seat direction.

Dimensions: width 450 mm, depth 600 mm, height 450 mm,

Order no. 5567000

Type A B CFixed Fixed movable

with base-plate

At least 3 seats are required per multi seat unit.

Typical combinationOther possible combinations on request.


23

Allegro®-VarioOption 9ALLEGRO Vario-RondoConsisting of 4 x 90° elements with 4 x 44.5 mm diameter roundtubular legs, galvanized and RILSAN polyamide coated (min. thick-ness 350 microns). 90° elements with 30 mm tubes and 15 x 15 mm mesh pattern.

Dimensions:Seat height 450 mm, 1450 mm external diameter, 250 mm clear inner aperture.

movable fixedOrder no. 51038 on request



ArenaOption 1ARENA - multi seat unitOrder no. 5252400

On 50 x 50 mm square tube support, available with the foot designs:A fixed, B fixed with base plate, C movable.



ARENA - multi seat unitSeat and subframe galvanized and RILSAN polyamide coated(minimum thickness 350 microns), 22 mm round tubular frame, 3.0 mm wire mesh, 30 x 20 mesh pattern on back, 11 x 9 mm mesh pattern on seat.

Dimensions:430 mm wide, 460 mm deep, seat height ca. 450 mm.




460

815

450

C movable

650

815

450

370

60

600

815

450

max. 275

295

For fixing to walls For wall mounting

600

815

450

160

600

815

450

ca. 4

00

ca. 250

A fixed

B fixed with base plate

Option 2ARENA SU (As option 1)For mounting on top of walls.Variable seat height.

Order no 52110


Option 3ARENA SR single seat(As option 1)For wall-mounting, on request.

Order no. 52624


430

1025575

1600

1150

2175

2750

1725

1150

2 sitzig

3 sitzig

4 sitzig

5 sitzig

430

1150




25 Seats and seating systems


1377

ø 25

x2

ø 250

45°

900

Option 1ENANO - single seat 45°25 mm external diameter tubular steel seat frame. Wire mesh seat surface, 250 mm diameter, 15 x 15 mm mesh pat-tern, 3.0 mm wire gauge, with 50 mm diameter tubular stand.Galvanized and RILSAN polyamide coated (min. thickness 350microns).

Order no. 52373

Option 2ENANO - single seat, flat25 mm external diameter tubular steel seat frame. Wire mesh seatsurface, 250 mm diameter, 15 x 15 mm mesh pattern, 3.0 mm wire gauge, with 50 mm diameter tubular stand. Galvanized andRILSAN polyamide coated (min. thickness 350 microns).

Order no. 52372

Option 3ENANO - table with foot rail25 mm external diameter tubular steel table frame, wire mesh table surface, 250 mm diameter, 15 x 15 mm mesh pattern, 3.0 mm wire gauge, with 50 mm diameter tubular stand, 34 mmdiameter foot rail. Table galvanized and RILSAN polyamide coated(min. thickness 350 microns). Hot-dip galvanized tubular standand foot rail.

Order no. 52443

Enano

ø 500

1100

1439

400

ø 34

ø 25

721

ø 250

740

1217

ø 25

x2




Exposit®

Pure ergonomicsThis is a seat with elegant, majestically curved lines which couldnot be more comfortable.

Option 1EXPOSIT - multi seat unitOrder no. 5252800




Armrests and side table supplied on request.

Figure: 3 seater with side table

EXPOSIT - multi seat unitSeat and subframe galvanized and RILSAN polyamide coated (minimum thickness 350 microns), seat frame made of flat steel form and profile parts, 15 x 30 mm wire mesh pattern, 3.0 mm wire gauge.

EXPOSIT features:Ergonomic design, concave seat with knee roll, curved andanatomically correct back, wire mesh welded to the inner sides ofthe frame. Apart from that, the overall design prevents misuse forsleeping and makes it more difficult to sit on the back, i.e. nodirty footmarks on the seats.

Dimensions:width 475 mm, depth 641 mm, overall height 840 mm, seat height 460 mm


Please note:


Option 2Armrests

both sides left right withoutOrder no.. 51663 51664 51665 51594


Ground sleeveOrder no. 5003665 only for foot design A

Special ground sleeves are now available for temporarily removingthe multi seat unit upon request and at extra charge. You need oneground sleeve for each foot. Ground sleeve of grey cast-iron, treatedwith acrylic resin lacquer, 300 mm long with lateral anchoring claws.Threaded ring and blind plug also of grey cast-iron, chrome-plated.Polyamide strain ring.

Use:• The ground sleeve is concreted in level with the ground.• The threaded ring and strain ring are slipped over the lower end

of the foot.• The foot of the bench is inserted into the ground sleeve.• The threaded ring is screwed tight.• When the bench is removed, the ground sleeve is sealed with

a blind plug.




641

840

460

641

840

460

160

641

840

460

ca. 4

00

ca. 250


A fixed B fixed with base plate C movable


641

840

450

max. 275

365

For fixing to walls

Option 3EXPOSIT seats

Exposit-SU Exposit-SRFor mounting Foron top of walls. wall-mounting

Order no. 52629 52630

Without mounting accessoriesAvailable with welded-on armrests upon request.

641

840

460

For wall mounting

These ground sleeves are suitable or use with all multi seat units on 50 x 50 supporting tubes.

Foot

Threaded ring

Strain ring

Ground sleeveFoundation




MultiOption 1MULTI - multi seat unitOrder no. 5252500




MULTI - multi seat unitSeat and subframe galvanized and RILSAN polyamide coated (mini-mum thickness 350 microns), round 25 mm diameter tubular frame,3.0 mm wire gauge, 15 x 15 mm wire mesh pattern.

Dimensions: 400 mm wide, 355 mm deep, 135 mm high,seat height approx. 430 mm.

Option 2MULTI - R single seat for wall-mounting.Tubular steel and wire mesh seat surface.

Dimensions: width 400 mm, depth 395 mm, height 135 mm,Variable seat height, without accessories for wall-mounting

Order no. 58233

Option 3MULTI-U single seat for mounting on steps, wallsTubular steel and wire mesh seat surface.

Dimensions:width 400 mm, depth 350 mm, height 100 mm,Bracket height 75 mm, seat height variable according to base,without accessories for mounting on top of walls

Order no. 51324

Option 4MULTI-OZG, single seat with radial frame and subframeA leg is required after four seats.Frame and feet galvanized and colour-coated. With your order, pleaseenclose a plan showing the radii, dimensions of arcs and desired seatdirection.

Dimensions: width 400 mm, depth 350 mm, seat height 430 mm,

Order no. 5825300Type A B C

fixed fixed movablewith base-plate




Option 5MULTI stainless steel multi seat unitOrder no. 5252600

Stainless steel seats, 25 mm tube diameter, 15 x 15 mm mesh pat-tern, 3.0 mm wire gauge. Ends of wires welded to inner sides of tubes (patent applied for).

Dimensions: width 400 mm, depth 355 mm, height 135 mm, seat height 430 mm.

Galvanized and coated steel subframe, on 50 x 50 mm square tube support, available with the foot designs: A fixed, B fixed with base plate, C movable.

Type Total length No. of feet2-seater 1025 mm 23-seater 1600 mm 24-seater 2175 mm 25-seater 2750 mm 3

ca. 4

00

ca. 250

350

430

350

430

510

max. 275

350

430

ca. 3

50

350

430

395

160

350

430

Dimensions and types of fixing foroptions 1 - 5


For mounting on top of walls.For wall-mounting

Ground sleeve for foot design A supplied optionally.See description for the Exposit multi seat unit.

1025

575

1600

1150

2175

2750

1150

1725

2 sitzig

3 sitzig

4 sitzig

5 sitzig

400400

1150

3-seater

4-seater

5-seater

2-seater




Option 1TOPSIT - multi-seat units with Pagwood®

Order no. 5252700

On square tube support 50 x 50 mm, available with the foot designs: A fixed, B fixed with base plate, C movable.Armrests supplied on request.

The following variants are possible:armrest right, armrest left, armrests on both sides (from the posi-tion of the seated person).



Armrests supplied on request.

Topsit multi-seat units are also available on request with tubular frames.

160

641

840

460

ca. 4

00

ca. 250


Ground sleeve for foot design A supplied as an option.See description for the Esperanza seat unit, page 22.


Topsit with Pagwood®

TOPSIT - multi-seat unit with Pagwood®

Side frames made of laser-cut components, seat and back surfaces are formed by Pagwood® slats.Frames are galvanized and RILSAN polyamide coated, minimum thickness 350 microns.

Dimensions:width 475 mm, depth 643 mm, height 842 mm, seat height approx. 450 mm.

Also available with curved supporting tubes on request.

Topsit

Option 2TOPSIT - multi seat unitsOrder no. 5252700

On rectangular 50 x 50 mm supporting tube, galvanized and coat-ed, available with the foot designs:A fixed, B fixed with base plate, C movable.







TOPSIT - multi seat unitLaser-cut frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, 4.0 mm wire gauge, wires terminate inside frames.Upper wires are transverse to seat direction. There are two areasof denser mesh to conceal the flame cut parts and for additionalseat strength. Galvanized and RILSAN polyamide coated, mini-mum thickness 350 microns.

Dimensions:width 475 mm, depth 643 mm, height 842 mm, seat height approx. 450 mm

Note:Orders and invitations to tender should also state in each case:With or without armrests.If with armrests then where and how many.Which foot design: A, B or C.How many seats: 2, 3, 4 or 5-seater


641

840

460

ca. 4

00

ca. 250

160


Ground sleeve for foot design A supplied as an option. See description of the Exposit seat unit.







Please note:


Armrests

both sides left right withoutBestell-Nr. 52351 52353 52352 52354

Option 3TOPSIT - multi seat units in perforated plateOrder no. 5252700

On 50 x 50 mm square tube support, galvanized and coated steel,available with the foot designs: A fixed, B fixed with base plate, C movable.Armrests supplied on request.

The following variants are possible:Armrest right, armrest left, double-sided armrest (from the position of the seated person).

We recommend Topsit Pagwood® without backrest when used incombination with a table. See page 34.




Topsit multi seat units are also available with round-tube support.

Topsit - perforated plateIn stainless steel

Laser-cut frames, perforated plate seat and back seat and back surfaces, square hole pattern, 2.0 mm thick, standard corundum-blasted and electrolytically polished surface. Galvanized and coated steel subframe.

32

641

840

460

ca. 4

00

ca. 250

160



Ground sleeve for foot design A supplied as an option.See description of the Exposit seat unit..




Please note:The armrests are welded to the seats thus they cannot be added later.







Topsit multi seat units are also available with round-tube supports.

Topsit without backrestmulti seat unit with Pagwood® slatted seats

TOPSIT - without backrest multi seat unit, Pagwood®

Laser-cut side-frames, 12 mm Pagwood® slatted seats. Seat frames and subframe made of galvanized and coated steel.

Dimensions: width 475 mm, depth 485 mm, seat height 443 mm,

Option 4TOPSIT - multi seat unit without back, Pagwood®

Order no. 5252700

On 50 x 50 mm square tube support, galvanized and coatedsteel, available with the foot designs: A fixed, B fixed with base plate, C movable.Armrests supplied on request.

The following variants are possible:Armrest right, armrest left, double-sided armrest (from the position of the seated person).

512

574

445

ca. 4

00

ca. 250

160


Ground sleeve for foot design A supplied as an option.






Please note:



Option 5TOPSIT - multi seat unit without back, wire meshOrder no. 5252700

On 50 x 50 mm square tube support, galvanized and coated steel, available with the foot designs: A fixed, B fixed with base plate, C movable.Armrests supplied on request. The following variants are possible:Armrest right, armrest left, double-sided armrest (from the position of the seated person).




Topsit multi seat units are also available with round-tube frames.

Topsit without backrestwith wire mesh

TOPSIT - multi seat unit without back, wire meshLaser-cut side frames, wire-mesh seat surface, 15 x 30 mm meshpattern, 4.0 mm wire gauge, wires terminate inside frames. Upper wires are transverse to seat direction. There are two broad stripes of denser mesh for additional seatstrength. Galvanized and RILSAN polyamide coated, minimumthickness 350 microns.

Dimensions: width 475 mm, depth 485 mm, height 443 mm,

512

574

445

ca. 4

00

ca. 250

160


Ground sleeve for foot design A supplied as an option.



Please note:




35



45

1

83

9

100

10

0

475

18

6

1825

Option 7TOPSIT multi seat unit, 4-seater with 5 armrestsConsisting of:

3 TOPSIT seats with armrests on the right-hand side,1 TOPSIT seat with armrests on both sides,1 trapezoid subframe

Dimensions:475 mm wide, 643 mm deep, total length 2400 mm

TOPSIT - multi seat units on trapezoid subframesFor high class waiting areas, for DB design gmp, single row.100 x 50 mm supporting tube, galvanized and plastic-coated,trapezoid feet of 80 mm square tube, with boreholes for bolt-ing to finished floor.

Option 8TOPSIT multi seat unit, 5-seater with 6 armrestsConsisting of:

4 TOPSIT seats with armrests on the right-hand side,1 TOPSIT seat with armrests on both sides,1 trapezoid subframe


Option 6TOPSIT multi seat unit, 3-seater with 4 armrests

Laser-cut side frames, wire-mesh seat and back surfaces, 15 x 30 mm mesh pattern, 4.0 mm wire gauge, wires terminateinside special DB profile, upper wires are transverse to seat direction, with special areas of denser mesh for additional seatstrength. Galvanized and RILSAN polyamide coated, minimumthickness 350 microns.


Consisting of: 2 TOPSIT seats with armrests on the right-hand side, 1 TOPSIT seat with armrests on both sides, trapezoid subframe.




1825

193 641

1475

100

83

9

18

6

45

1

10

0

475


37


Option 11TOPSIT multi seat unit, 10-seater (5+5) with 12 armrests

Consisting of:8 TOPSIT seats with armrests on the right-hand side,2 TOPSIT seats with armrests on both sides,1 trapezoid subframe



Consisting of:6 TOPSIT seats with armrests on the right-hand side,2 TOPSIT seats with armrests on both sides,1 trapezoid subframe



Laser-cut side frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, 4.0 mm wire gauge, wires terminate inside specialprofile, upper wires are transverse to seat direction. With specialareas of denser mesh for additional seat strength. Galvanized andRILSAN polyamide coated, minimum thickness 350 microns.


Consisting of: 4 TOPSIT seats with armrests on the right, 2 TOPSIT seats with armrests on both sides, 1 trapezoid subframe


Option 12TOPSIT-Vario multi seat unit, 4-seater with 3 armrests

100 x 100 mm square tubular supporting stand and feet, galvanized and plastic-coated. With 300 x 450 mm base plates.Each with 4 holes for bolting 100 mm below the finished floor.Other fixing options on request. TOPSIT seat, laser-cut side frames,wire-mesh seat and back surfaces, 15 x 30 mm mesh pattern, 4.0 mm wire gauge, wires terminate inside special profile, upper wires are transverse to seat direction.

With special areas of denser mesh for additional seat strength. Galvanized and RILSAN polyamide coated, minimum thickness 350 microns.

Consisting of:3 TOPSIT seats with armrests on the right-hand side,1 TOPSIT seat without armrest,1 TOPSIT-Vario subframe, total length 2070 mm.

Option 13TOPSIT-Vario multi seat unit, 6-seater with 5 armrests

Consisting of:

5 TOPSIT seats with armrests on the right-hand side,1 TOPSIT seat without armrest,1 TOPSIT-Vario subframe, total length 3150 mm.

450300

2160

450300

1080




Option 14TOPSIT-Vario multi seat unit, 8-seater (4+4) with 6 armrests

Option 15TOPSIT-Vario multi seat unit, 12-seater (6+6) with 10 armrests

Consisting of:

6 TOPSIT seats with armrests on the right-hand side,2 TOPSIT seats without armrest,1 TOPSIT-Vario subframe, total length 2070 mm.

Consisting of:

10 TOPSIT seats with armrests on the right-hand side,2 TOPSIT seats without armrest,1 TOPSIT-Vario subframe, total length 3150 mm.

450300

2160

450300

1080


39




Intersit®

ø17

200

1411

225 941

80 180

80

3

564

46

5

1391

400

220

*Holes provided for fixing if required.



Option 1Erlau INTERSIT bench "remissio", 3-seaterLaser-cut frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, with 2 special broad stripes of denser mesh to opti-cally conceal the flame cut parts and for additional seat strength. 4.0 mm wire gauge, wires terminate inside special profile. Benchgalvanized and RILSAN polyamide coated, minimum thickness 350microns. With two armrests. 10 year ERLAU anti-rust guarantee!Free-standing design, length 1400 mm. Feet with base plates forbolting to concrete foundation, or optionally to finished floor (FFB0) or 150/200 mm below finished floor.

Fixed type with base plateMovable type*

Option 2Erlau INTERSIT bench "remissio", 4-seaterLaser-cut frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, with 2 special broad stripes of denser mesh to opti-cally conceal the flame cut parts and for additional seat strength. 4.0 mm wire gauge, wires terminate inside special profile. Benchgalvanized and RILSAN polyamide coated, minimum thickness 350microns. With three armrests. 10 year ERLAU anti-rust guarantee!Free-standing design, length 2350 mm. Feet with base plates forbolting to concrete foundation, or optionally to finished floor (FFB0) or 150/200 mm below finished floor.


Option 3Erlau INTERSIT bench "remissio", 6-seaterLaser-cut frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, with 4 special broad stripes of denser mesh to opti-cally conceal the flame cut parts and for strengthening the seat. 4.0mm wire gauge, wires terminate inside special profile. Upper wiresare transverse to seat direction. Bench galvanized and RILSANpolyamide coated, minimum thickness 350 microns. With threearmrests. 10 year ERLAU anti-rust guarantee! Free-standing design, length 2800 mm. Feet with base plates forbolting to concrete foundation, or optionally to finished floor (FFB 0) or 150/200 mm below finished floor.


ø17

80

1315

225 941 450 941

2782

2802

187

220 180

46

5

400

Option 4Erlau INTERSIT bench "remissio", 3+3-seater (back to back)Laser-cut frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, with 2 special broad stripes of denser mesh to opti-cally conceal the flame cut parts and for additional seat strength. 4.0 mm wire gauge, wires terminate inside special profile. Benchgalvanized and RILSAN polyamide coated, minimum thickness 350microns. With 2 armrests each side. 10 year ERLAU anti-rust guar-antee! Free-standing design, length 1411 mm. Feet with baseplates for bolting to concrete foundation, or optionally to finishedfloor (FFB 0) or 150/200 mm below finished floor.


Option 5Erlau INTERSIT bench "remissio" , 4+4-seater (back to back)Laser-cut frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, with 2 special broad stripes of denser mesh to opti-cally conceal the flame cut parts and for additional seat strength. 4.0 mm wire gauge, wires terminate inside special profile. Benchgalvanized and RILSAN polyamide coated, minimum thickness 350microns. With 2 armrests each side. 10 year ERLAU anti-rust guar-antee! Free-standing design, length 2330 mm. Feet with baseplates for bolting to concrete foundation, or optionally to finishedfloor (FFB 0) or 150/200 mm below finished floor.


Option 6Erlau INTERSIT bench "remissio", 6+6-seater (back to back)Laser-cut frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, with 4 special broad stripes of denser mesh to opti-cally conceal the flame cut parts and for additional seat strength. 4.0 mm wire gauge, wires terminate inside special profile. Upper wires are transverse to seat direction. Bench galvanizedand RILSAN polyamide coated, minimum thickness 350 microns. Each with 3 armrests. 10 year ERLAU anti-rust guarantee! Free-standing design, length 2802 mm. Feet with base plates forbolting to concrete foundation, or optionally to finished floor(FFB 0) or 150/200 mm below finished floor.


*Holes provided for fixing if required


41



Option 7Erlau INTERSIT wire mesh bench for the "remissio", 3-seater

Laser-cut frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, with 2 special broad stripes of denser mesh to optical-ly conceal the laser-cut parts and for additional seat strength. 4.0 mm wire gauge. Wires terminate inside special profile.Bench galvanized and RILSAN polyamide coated, minimum thickness350 microns. With two armrests. 10 year ERLAU anti-rust guarantee!Rear-mounted design, length 1411 mm.For mounting in shelter "Raster 22".Optional: Bracket for mounting on wall.

Order no. 52708

Option 8Erlau INTERSIT Pagwood® bench "remissio", 3-seater

Laser-cut frames, seat and back surfaces formed by Pagwood® slatsrunning the whole width, mounted in special profile.Metal parts galvanized and RILSAN polyamide coated, minimumthickness 350 microns. With two armrests. 10 year ERLAU anti-rust guarantee! Rear-mounted design, length 1433mm. For mounting in shelter "Raster 22".Optional: Bracket for mounting on wall.

Order no. 52781

Option 9Erlau INTERSIT without backrest "sinnaplico", 3-seater

Laser-cut frame, continuous wire-mesh seat surface, 15 x 30 mmmesh pattern, with 2 special broad stripes of denser mesh to optical-ly conceal the laser-cut parts and for additional seat strength. 4.0 mm wire gauge. Bench galvanized and RILSAN polyamide coated, minimum thickness 350 microns. 10 year ERLAU anti-rustguarantee! Free-standing design. Length 1600 mm. Feet with baseplates for bolting to concrete foundation, or optionally to finishedfloor (FFB 0) or 150/200 mm below finished floor.


Option 10Erlau INTERSIT without backrest, 4-seaterLaser-cut frame, continuous wire-mesh seat surface, 15 x 30 mmmesh pattern with 2 special broad stripes of denser mesh to opticallyconceal the laser-cut parts and for additional seat strength. 4.0 mmwire gauge. Bench fully galvanized and RILSAN polyamide coated,(min. thickness 350 microns). Length 1800 mm.

Feet with base plates for bolting to concrete foundation, or option-ally to finished floor (FFB 0) or 150/200 mm below finished floor.

fixed type, with base platemovable type*

Technische Änderungen vorbehalten.* Bohrungen zur möglichen Befestigung vorhanden





46

5

564

811

24

2

220

400

200

2824

13911391

217 957 434 957

80180

ø17

46

5

564

811

24

2

220

400

200

2824

13911391

217 957 434 957

80180

ø17

43

Option 12Erlau INTERSIT Pagwood® bench "remissio", 3-seaterLaser-cut frame, seat and back surfaces formed by Pagwood® slatsmade of beech veneers, impregnated with resins and pressed intoformed parts. Thus weather-resistant, easy to care for, highlyimpact and scratch resistant. Slats also protected all the way roundby laser-cut parts and special profile. All steel parts galvanized andRILSAN polyamide coated, minimum thickness 350 microns. With two feet and two armrests. Free-standing design. Length 1433 mm, depth 564 mm, seat height 465 mm. Feet with base plates for bolting to concrete foundation, or optio-nally to finished floor (FFB 0) or 150/200 mm below finished floor.


Option 13Erlau INTERSIT bench with Pagwood® "remissio", 6-seaterLaser-cut frame, seat and back surfaces with Pagwood® slats,made of beech veneers, impregnated with resins and pressed intoformed parts. Thus weather-resistant, easy to care for, highlyimpact and scratch resistant. Slats also protected all the wayround by laser-cut parts and special profile. All steel parts galva-nized and RILSAN polyamide coated, minimum thickness 350microns, with 4 feet and 3 armrests. Free-standing design, length2824 mm, depth 564 mm, seat height 465 mm. Feet with baseplates for bolting to concrete foundation, or optionally to finishedfloor (FFB 0) or 150/200 mm below finished floor.




Option 11Erlau INTERSIT without backrest "sinnaplico", 3-seater - Pagwood® slats

Laser-cut frame, seat surface formed by Pagwood® slats running thewhole width. Bench galvanized and RILSAN polyamide coated, mini-mum thickness 350 microns. 10 year ERLAU anti-rust guarantee!Free-standing design. Length 1600 mm. Feet with base plates forbolting to concrete foundation, or optionally to finished floor (FFB 0) or 150/200 mm below finished floor.



2824

1391 1391

957957 434 217

1315

188

46

4

24

0

81

0

548 220

80

400

180

ø17

Option 14Erlau INTERSIT bench with Pagwood®, 3+3-seater (back-to-back)Laser-cut frames, seat and back surfaces with Pagwood® slats, madeof beech veneers, impregnated with resins and pressed into formedparts. Thus weather-resistant, easy to care for, highly impact andscratch resistant. Slats also protected all the way round by laser-cutparts and special profile. All steel parts galvanized and RILSANpolyamide coated, minimum thickness 350 microns. With 2 feet, each bench has 2 armrests. Free-standing design,length 1433 mm, depth 564 mm, seat height 465 mm. Feet with base plates for bolting to concrete foundation, or option-ally to finished floor (FFB) or 150 mm below finished floor.


Option 15Erlau INTERSIT bench with Pagwood® "remissio", 6+6-seater(back-to-back)Laser-cut frames, seat and back surfaces with Pagwood® slats,made of beech veneers, impregnated with resins and pressed intoformed parts. Thus weather-resistant, easy to care for, highlyimpact and scratch resistant. Slats also protected all the wayround by laser-cut parts and special profile. All steel partsgalvanized and RILSAN polyamide coated, minimum thickness 350 microns. With 4 feet and each bench has 3 armrests. Free-standing design, length 2824 mm, depth 564 mm, seat height465 mm. Feet with base plates for bolting to concrete foundation,or optionally to finished floor (FFB) or 150 mm below finishedfloor.







fixed fixed with baseplate movable

Olympia-Nova

45

23001150

300

400

1150

575

GE AE AE

ZE

AE

AE

ZE

AE AE AE

90ϒ30ϒ

30ϒ

30ϒ

90ϒ

30ϒ

30ϒ

30ϒ

GE = basic unitAE = add-on unit

Figure: 1 basic and 1 add-on unit

Note:Erlau furniture is supplied without mounting accessories forattachment to wall or ground. This always has to be provided bythe customers.

Note on the configuration options for OLYMPIA NOVA:Each OLYMPIA NOVA configuration starts with a straight orcurved basic unit. It is then extended with add-on units.

Order no.: 5286900

Exception:Full circle, see sketch page 50. This consists of 12 x 30° add-on units.






Option 2Add-on unit, 1-seater, straightOLYMPIA-NOVA features: bowed seat with knee roll, backrest with plateau top, galvanized and colour-coated tubular steelfeet. Tubular steel and wire mesh seat and back parts. Seat andback parts connected by laser-cut formed parts. 30 mm externaltube diameter, 3.5 mm wire gauge, 15 x 25 mm mesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns).

Dimensions:(W x D x H) 575 x 700 x 820 mm, seat height 455 mm

Type A B Cfixed fixed with movable

base plate

Option 1Basic unit, 1-seater, straightOLYMPIA-NOVA features: bowed seat with knee roll, backrest with plateau top, galvanized and colour-coated tubular steelfeet. Tubular steel and wire mesh seat and back parts. Seat andback parts connected by laser-cut formed parts. 30 mm externaltube diameter, 3.5 mm wire gauge, 15 x 25 mm mesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns).



base plate

AE AEAEGE

575

2300

Typical combination

Option 4Add-on unit, 2-seater, straightOLYMPIA-NOVA features: bowed seat with knee roll, backrestwith plateau top, galvanized and colour-coated tubular steel feet. Tubular steel and wire mesh seat and back parts. Seat and backparts connected by laser-cut formed parts. 30 mm external tubediameter, 3.5 mm wire gauge, 15 x 25 mm mesh pattern, galva-nized and RILSAN polyamide coated (min. thickness 350 microns).



base plate

Option 3OLYMPIA seat element, 2-seater, straightOLYMPIA-NOVA features: bowed seat with knee roll, backrestwith plateau top, galvanized and colour-coated tubular steel feet. Tubular steel and wire mesh seat and back parts. Seat and backparts connected by laser-cut formed parts. 30 mm external tubediameter, 3.5 mm wire gauge, 15 x 25 mm mesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns).



base plate

GE AE AE AE

1150

4600

Typical combination







Option 6Add-on unit, 1-seater, 30° circular curvature, seats facing inwardsOLYMPIA-NOVA features: bowed seat with knee roll, backrest with plateau top, galvanized and colour-coated tubular steelfeet. Tubular steel and wire mesh seat and back parts.Longitudinal wires arranged radially in the Olympia style. Seat and back parts connected by laser-cut formed parts. 30 mm external tube diameter, 3.5 mm wire gauge, 15 x 25 mmmesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns).

Dimensions:External radius 1767 mm, depth 700 mm, height 820 mm, seat height 455 mm


base plate

Option 5Basic unit, 1-seater, 30° circular curvature, seats facing inwardsOLYMPIA-NOVA features: bowed seat with knee roll, backrest with plateau top, galvanized and colour-coated tubular steelfeet. Tubular steel and wire mesh seat and back parts.Longitudinal wires arranged radially in the Olympia style. Seat and back parts connected by laser-cut formed parts. 30 mm external tube diameter, 3.5 mm wire gauge, 15 x 25 mmmesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns).

Dimensions:External radius 1767 mm, depth 700 mm, height 820 mm, seat height 455 mm


base plate

AE

AE

AE

AE

AE

GE

R=1445 mm

R=1767 m

m

R=1061 mm

Typical combinationOlympia-NovaSeats facing inwards

180° semi-circle consisting of:1 x 30° basic unit5 x 30° add-on unitsSeats facing inwards

Option 8Add-on unit, 1-seater, 30° circular curvature, seats facing outwardsOLYMPIA-NOVA features: bowed seat with knee roll, backrest with plateau top, galvanized and colour-coated tubular steelfoot. Tubular steel and wire mesh seat and back parts.Longitudinal wires arranged radially in the Olympia style. Seat and back parts connected by laser-cut formed parts. 30 mm external tube diameter, 3.5 mm wire gauge, 15 x 25 mmmesh pattern, galvanized and RILSAN polyamide coated (min.thickness 350 microns).

Dimensions:External radius 1607 mm, depth 700 mm, height 820 mm, seatheight 455 mm


base plate

Option 9Armrest for Olympia NovaLaser-cut and curved part, 62 mm wide, 6 mm thick, galvanizedand colour-coated, securely screwed to fixing points on the seatand back parts. Can be retrofitted.

Option 7Basic unit, 1-seater, 30° circular curvature, seats facing outwardsOLYMPIA-NOVA features: bowed seat with knee roll, backrestwith plateau top, galvanized and colour-coated tubular steelfeet. Tubular steel and wire mesh seat and back parts.Longitudinal wires arranged radially in the Olympia style. Seatand back parts connected by laser-cut formed parts. 30 mmexternal tube diameter, 3.5 mm wire gauge, 15 x 25 mm meshpattern, galvanized and RILSAN polyamide coated (min. thickness350 microns).

Dimensions:External radius 1607 mm, depth 700 mm, height 820 mm, seatheight 455 mm


base plate




AE

AE

AE AE

AE

AE

AE

AE

AEAE

AE

AE

R=1

.608

mm

Typical combination

Full circle consisting of 12 x 30° add-on units, seats facing outwards

GE AE

AE

AE

AE

AE

R=906 mm

R=1.

189

mm

180° semi-circle consisting of:1 x 30° basic unit5 x 30° add-on unitsSeats facing outwards




530

449

285

ca. 4

00

ca. 250

Option 10Basic unit, 2-seater, straight, without backrestOlympia features: bowed seat with knee roll, galvanized and powder-coated tubular steel feet.Tubular steel and wire mesh seat, 30 mm external tube diameter,wire gauge 3.5 mm, 15 x 25 mm mesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns).

Dimensions:width 1135 mm, depth 530 mm, height 449 mm.


base plate

Option 11Add-on unit, 2-seater, straight, without backrest(As option 10) but with just one foot.


base plate

Option 13Add-on unit, single seat, straight, without backrest(As option 12) but with just one foot.


base plate

Option 12Basic unit, single seat, straight, without backrestOlympia features: bowed seat with knee roll, galvanized and powder-coated tubular steel feet.Tubular steel and wire mesh seat, 30 mm external tube diameter,wire gauge 3.5 mm, 15 x 25 mm mesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns).

Dimensions:width 635 mm, depth 530 mm, height 449 mm.


base plate




530




Option 14Basic unit, single seat, curved 30°, without backrestOlympia features: bowed seat with knee roll (as option 10).Tapered Olympia seats are curved throughout, eliminating anglesand gaps between seats.Tubular steel legs galvanized and powder coated.

Dimensions:Outer radius 1600 mm, depth 530 mm, height 449 mm.


base plate

Option 15Add-on unit, single-seat, curved 30°, without backrest(As option 12) but with a single leg.


base plate




Swingo®

Option 1SWINGO - folding seat with backrestMulti seat unit on 60 x 40 mm square tube, galvanized and coatedsubframe, 25 mm external diameter tubular steel seat frame, wire mesh seat and back surfaces, 9 x 18 mm mesh pattern, 3.0. mm wire gauge, galvanized and RILSAN polyamide coated.

Dimensions:width 505 mm, depth 314/512 mm, seat height 466 mm,

Type A Bfixed wall-with base- mountedplate

3-seaterOrder no. 51634 51529

Wall-mounted

Fixed with base plate

3-sitzig

1655

512314

466

512314

505 505425505

505 505425505

3-seater


Loungers, chairs, stackable benches and tables54


BornholmErlau therapeutic loungers ensure pleasant rest and relaxation inprivate and public environments alike. The raised seat level facili-tates getting on and off, suitable for wet areas and nursing homes.

In the latter instance, in particular, the BORNHOLM-R25 comes intoits own. With its folding armrest, this lounger can be safely usedby the elderly and infirm. Access from the side is completely unob-structed, making this model as easy to get on and off as an ordi-nary chair. The folding armrest also allows the BORNHOLM-R25 tobe used by people in wheel chairs. In just such situations, the bedheight of 46 cm is of considerable importance.

For added convenience, the BORNHOLM-R25 is now available withtwo strong wheels, making it easy to move even on rough or softground.

For the utmost convenience, a model is available featuring bothoptional extras, i.e. folding armrest and wheels.

Option 1BORNHOLM-R25 tilting therapeutic loungerTubular steel subframe, tubular steel and wire mesh detachablebed, external tube diameter 25 mm, wire gauge 3.0 mm, mesh pattern 17.5 x 17.5 mm, galvanized and RILSAN polyamide coated(min. thickness 350 microns); with abrasion resistant gliders, stackable.

Dimensions:(W x D x H) 600 x 1400 x 1040 mm, seat height 460 mm.Bed area: length 2000 mm, width 500 mm.

Type Pre-galvanizedOrder no. 52239

Option 2BORNHOLM-R25 tilting therapeutic lounger(as option 1) but with folding armrest and/or wheels.

Dimensions:(W x D x H) 600 x 1400 x 1040 mm, seat height 460 mm.Bed area: length 2000 mm, width 500 mm.

Type with- with withfolding wheels folding armrestarmrest and wheel

Order no. 51137 51132 51219

1860

1900

500

590

960

960

ElbaSunbed and sauna laounger

Option 3ELBA pool and sauna lounger, with angled head section, raised bedheight and armrests.Tubular steel frame and legs, wire mesh bed, external tube diameter 25 mm, wire gauge 3.0 mm, mesh pattern 15 x 15, galvanized and RILSAN polyamide coated (min. thickness 350 microns),with foot-caps and abrasion resistant gliders; stackable.46 cm high bed makes getting on and off easier.

Dimensions: (W x D x H) 700 x 1920 x 630 mm, bed height 460 mmBed area: length 2000 mm, width 500 mm

TypeOrder no. 56529


55 Loungers, chairs, stackable benches and tables


OffenburgOption 1Offenburg chairTubular steel frame and legs, external tube diameter 25 mm, wiremesh seat and backrest, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, RILSAN polyamide coated (min. thickness 350microns).Dimensions:width 600 mm, depth 625 mm, height 815 mm, seat height 450 mm.

Order no 58021

Option 2Omega benchTubular steel frame and legs, external tube diameter 25 mm, wire mesh seat and backrest, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, RILSAN polyamide coated (min. thickness 350 microns).

Dimensions:width 1200 and 1600 mm*, depth 625 mm, height 808 mm, seat height 450 mm.

Order no. 52099*)Type 1600 mm with a 34 mm tube diameter

Option 3Florenz chairTubular steel frame and legs, external tube diameter 22 mm, wire mesh seat and backrest, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, RILSAN polyamide coated (min. thickness 350 microns).

Dimensions:width 600 mm, depth 625 mm, height 815 mm, seat height 450 mm.

Order no. 51241

Option 4Triberg chairTubular steel frame and legs, external tube diameter 18 mm, wire mesh seat and backrest, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, RILSAN polyamide coated (min. thickness 350 microns).


Order no. 51061

Option 5Rothenburg chairTubular steel frame and legs, external tube diameter 25 mm, wire mesh seat and backrest, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, RILSAN polyamide coated (min. thickness 350 microns), without armrests.


Order no. 58072





57 Loungers, chairs, stackable benches and tables


Option 6Tabula-NOVA tableSubframe galvanized and powder coated, top consists of steel tubing and wire mesh, external tube diameter 25 mm, wiregauge 3.0 mm, mesh pattern 15 x 15 mm, galvanized and RIL-SAN polyamide coated (min. thickness 350 microns).

Dimensions:Width 1200 mm, depth 800 mm, table height 730 mmWidth 2000 mm, depth 800 mm, table height 730 mm

Width 1200 mm Width 2000 mmOrder no. 52575 52185

At an extra charge and upon request, the feet are available withboreholes for fixing the table to the floor.

Option 7Mensa-NOVA tableTubular steel and wire mesh, external tube diameter 30 mm, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, galvanized and RILSAN polyamide coated (min. thickness 350 microns).

Dimensions: width 800 mm, depth 800 mm, height 730 mm.

Order no. 52576

At an extra charge and upon request, the feet are available withboreholes for fixing the table to the floor.

Option 8Lawn-saver feetPolyamide, reinforced with stainless steel lining.

Colour White Black

Offenburg Order no.. 5030001 5030002Omega Order no. 5030001 5030002Florenz Order no.. 5031001 5031002Triberg Order no.. 0504985 506985

Option 9Foot capsReinforced with stainless steel lining

Colour White Black

Offenburg Order no. 504975 506975Omega Order no. 504975 506975Florenz Order no. 504965 506965Triberg Order no. 504805 506805Rothenburg Order no. 504975 506975

Option 10Nameplate for Offenburg/Rothenburg chairsMax. 14 letters including spaces, welded into wire mesh.Minimum quantity: 25

Order no. 50980




ParadorOption 1PARADOR - multi seat unitHot-dip galvanized, tubular steel frame, 38 mm external tube diameter, wire mesh seat and table surfaces, 3.0 mm wire gauge.15 x 15 mm mesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns).

Dimensions: Total length 1600 mm Seat height 420 mmTotal depth 1800 mm Seat depth 350 mmTotal heigth 720 mm Table width 800 mm


Option 2PARADOR - multi seat unitHot-dip galvanized, tubular steel frame, 38 mm external tubediameter, wire mesh seat surfaces, 3.0 mm wire gauge. 15 x 15mm mesh pattern, galvanized and RILSAN polyamide coated(min. thickness 350 microns), Werzalit granite pattern table sur-face.

Dimensions: Total length 1600 mm Seat height 420 mmTotal depth 1800 mm Seat depth 350 mmTotal heigth 720 mm Table width 960 mm


Note:The movable type is equipped with gliders, whereas the fixedvariant has 4 ground anchors for concreting in.

TivoliOption 1TIVOLI park loungerTubular steel frame, external tube diameter 34 mm, wire meshbed, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, galvanizedand RILSAN polyamide coated (min. thickness 350 microns), bed profiled in accordance with average anatomical measurements; with screw-mounted gliders.

Dimensions:(W x L x H) 650 x 1944 x 636 mm

Order no. 59469

Note:The movable type is equipped with gliders, whereas the fixed vari-ant has 4 ground anchors for concreting in.Table and bench combination with wire mesh benches and tried-and-tested Werzalit tabletop with granite pattern.Other tabletop colours on request.

With its exclusive, avant-garde design, the TIVOLI park lounger makes an eye-catching feature in any leisure complex or health resort.


59 Bicycle parking systems


631

257,5

1034

ø 42,6

475

375

846

546

631

257,5

734

ø 200

475

375

552

ArcodosThe pronounced high-low positions allow parking in the smallest space. Can also be used for bicycles with "exotic" handlebars without getting them entangledwith the handlebars and cables of adjacent cycles. Very gentle on spokes and rims.

Option 1ARCODOS Hi-Lo bicycle stand Holds the front wheel, wheel spacing 37.5 cm, tubular 42 mmdiameter frame, with 2 holding loops.Central foot with anti-theft ring. Hot-dip galvanized with orwithout a colour coating.Dimensions: W 475 mm, H: 734 mm from finished floor

Type fixed with round baseOrder no. Order no.

Colour coated 52369 58439

Hot-dip galvanized 5236917 5003571

Fixed with round base

For concreting in


Bicycle parking systems60


1100

780 268380

580

ø42.4x2.6

300147,8

800

780 268380

580

ø200

Berlin support stand, fixed with round base

Berlin

Berlin support standwith round base

Option 1Berlin support standUniversal bicycle support stand of curved steel tube, external tubediameter 50 mm, with 2 plastic clamps for holding the bicycleframe and integrated steel ring for additional security againsttheft. Hot-dip galvanized with or without a colour coating.Can also be used as a normal support stand without using the clamps.Dimensions: (W x H x D) 800 x 800 x 380 mmHeight to middle of clamp 580 mm

Type Fixed with round baseOrder no.

Galvanized and 52196coated steel

Hot-dip galvanized steel 5219617

Berlin support stand, for concreting in

Berlin support stand for concreting in

Option 2Berlin support stand(as option 1) but for concreting in.Dimensions: (W x H x D) 800 x 800 x 380 mmHeight from finished floor to middle of clamp 580 mm.

Type For concreting inOrder no.

Galvanized and 52286coated steel

Hot-dip galvanized steel 5228617

Can also be used on connecting mounting rail, see Velofox illustration


61

Pedalo®

Option 1PEDALO bicycle stands for embedding in concreteStrong, compact, well designed bicycle stand made of curvedtubular steel, external tube diameter 50 mm, with plastic clamp for holding the bicycle frame and steel ring for use with a cable,chain or U-lock for additional security against theft. Hot-dip galvanized with or without a colour coating.

Dimensions: (W x H) 345 x 975/625 mm

Type For embedding in concreteOrder no. Order no.Pedalo Solo Pedalo Duo

Galvanized and 51923 2 x 51923coated steel

Hot-dip galvanized steel 5192317 2 x 5192317

Stainless steel 5205123 2 x 5205123

Option 2PEDALO bicycle stand with round base plate(As option 1) but with round, welded base plate for boltingdown.

Type Fixed with base plateOrder no. Order no.Pedalo Solo Pedalo Duo

Galvanized and 52043 51838coated steel

Hot-dip galvanized steel 5204317 5183817

Stainless steel 5204323 5183823



PEDALO SOLO PEDALO DUO

PEDALO stands consist of a curved steel tube with a plastic clampand an integral steel ring which, in conjunction with one's ownchain, provides optimal protection against theft.One of the chief advantages of the new Erlau PEDALO cycle stand isthat it is designed to secure the bicycle by its frame, preventing itfrom falling or being blown over, or rolling away on a slope.As soon as the frame is gripped by the clamp, both hands are leftfree to deal with e.g. saddle bags, a shopping basket or child's seat.

PEDALO DUO with round base

PEDALO SOLOWith round base

min. 60 cm

b

a

(190 cm)

Ais

lew

idth

10

0 -

12

0 c

m

min

. 120

cm

150 cm 150 cm

min. 10 cm

147 cm

Ais

lew

idth

100

- 12

0 cm

min. 60 cm

PEDALO DUO

PEDALO SOLO

min. 60 cm

252

cm

(190

cm

)

Layout along a wall Straight layout




Circular layout Angled layout


63

Pedalo® Hi-LoOption 1PEDALO Hi-Lo bicycle standRobust, space-saving bicycle stand for two cycles (40 cm apart) madeof 50 mm curved tubular steel with plastic clamps to secure cyclesby the frame and steel ring for additional protection against theft.Hot-dip galvanized with or without a colour coating. Raised frontwheel bracket features wire mesh lining and anti-twist flanged rims.

Dimensions: (W x H) 528 x 770 mm (from floor level)

Type fixed with square with round basebase 200 mm150 x 150 mm

Order no. 5120899 5121399 5120999

Option 2PEDALO Hi-Lo 50 bicycle stand with GACC recommendationRobust, space-saving bicycle stand for two cycles (50 cm apart)with plastic clamps to secure cycles by the frame and steel ringsfor additional protection against theft. Hot-dip galvanized with or without a colour coating. Raised frontwheel bracket features wire mesh lining and anti-twist fixing inhigh and low positions. With additional front wheel fixation for the lower parking position.

Type fixed with square with base platebase for bolting down150 x 150 mm

Order no. 51742 51725 51743



With square base plate,to be secured 270 mmbelowfloor level

Floor mounting accessories not included

Fixed Fixed, with roundbase plate for bolting to floor

PEDALO Hi-Lo, GACC design

PEDALO Hi-Lo, fixed installation

236

770

1070

1070

300

ca.4

00

876

The German Association of Cycling Clubs recommendsPedalo Hi-Lo stands be positioned so that the wheels ofadjoining cycles are 50 cm apart.Recommended quality Q 9613 (GACC seal of approval)

650

ϒ

ϒ

PEDALO Hi-Lo, single row

PEDALO Hi-Lo, two rows, staggered

PEDALO Hi-Lo, 30-degree angled layout

PEDALO Hi-Lo, 45-degree angled layout




Option 2Universal connecting mounting rail for bicycle stands (withoutdirty corners) - no foundations needed -Velofix, Arcodos, Pedalo, Hi-Lo and Berlin support stand, forcycle spacings of 40 cm, hot-dip galvanized, for dowelling to thefinished floor, plate thickness 3.0 mm, height 19 mm.

For two bicycle stands, 1600 mm long for four bicycles

For three bicycle stands, 2400 mm long for six bicycles

The scope of delivery does not include bolts or dowels.

800

All Erlau bicycle stands with round bases can be mountedon this universal connecting rail.


65

VelofoxVELOFOX bicycle stand

This product allows the frame and front wheel to be secured, thus fulfilling the latest anti-theft recommendations of police andinsurance companies. The double loops in the insertion areaenable the bicycle to be wheeled in and out with one hand on thesaddle. The pronounced high-low positions enable a great deal ofspace to be saved. A cycle spacing of only 37.5 cm is achieved with-out handlebars and cables getting tangled.

The conically tapering centring loop does not damage eitherwheel rims or spokes. The hot-dip galvanized design can be recom-mended without reservations, especially for schools, "bike andride" and other areas.



Option 1VELOFOX Hi-Lo bicycle standRobust and very space-saving bicycle stand for two bicycles at aspacing of 37.5 cm. Made of curved steel tube, 42 mm diameterwith two holding loops for protective guiding and holding thefront wheel. Central hoop for securing the front wheel andframe against theft. Hot-dip galvanized with or without a colourcoating.Dimensions: W 475 mm, H: 850 mm from finished floor.

Type Fixed With round baseOrder no. Order no.

Colour coated 52368 52280

Hot-dip galvanized 5236817 5228017

824

734

ø 200

475

375

510

220

850

824

850

63

475

375

510

220

1150

Fixed with round base

Fixed for concreting in

Option 2VELOFOX Hi-Lo bicycle standused with connecting mounting rail

Robust and very space-saving bicycle stand for two bicycles at aspacing of 37.5 cm. Made of curved steel tube, 42 mm diameter,with two holding loops for protective guiding and holding thefront wheel. Central hoop for securing the front wheel andframe against theft, with special base plate for bolting to mount-ing rail. Hot-dip galvanized with or without a colour coating.

Dimensions:W 475 mm, H: 850 mm from finished floor, overall height 970 mm

Type Fixed with base plate for mounting railOrder no.

Colour coated 52431

Hot-dip galvanized 5243117




824

147,8

970

80


400

1600

min

300

13881388

571

min 800 min 2723

min 1654

min 4933

343

523

2776

min

270

0

min 5500

67

Veloport®



A standard VELOPORT module enables 8 bicycles to be parked in a width of only 1.60 m.

Please tell us about your actual case, preferably providing us with the relevant ground plan. We will then work out a detailed offer for you. Naturally we will also be pleased to advise you on site.

Veloport variants

Veloport 1600 single double8 places 16 places

Order no. 5229717 5230017


Order no. 5238717 5238417


Order no. 5238817 5238517


Order no. 5238917 5238617


Planters68


LUNAFLOR planter enclosureTubular steel frame, 34 mm external tube diameter, 15 x 30 mmwire mesh surfaces, 3.0 wire gauge, galvanized and RILSANpolyamide coated, minimum thickness 350 microns, 721 mm diameter, 890 mm radius, hot-dip galvanized inner container, with 2 lifting loops welded on at the bottom, which extend to 10 cm below the top edge of the plant level which makes themeasy to lift with a fork lift or crane.

Order no. Height DiameterOption 1 52364 506 mm Full circle 360°

Option 2 52365 416 mm 3/4 circle 270°

Option 3 52429 326 mm 3/4 circle 270°

Options 2+3 only in combination with option 1.

Lunaflor®

326

721

416

721

506

721

Option 3LUNAFLOR 270° low

Option 2LUNAFLOR 270° complete

Option 1 LUNAFLOR 360° complete

506

416

326


69 Planters


Planta

1639

R 890

1513

1246

721

R 89

0

1639

R 890

1771

721

R 89

0

Typical combinations

Other combinations can be created.

Option 1PLANTA planter enclosureTubular steel frame, two-piece, 38 mm external tube diameter,15 x 15 mm mesh pattern surfaces, 3.0 mm wire mesh, galvanizedand RILSAN polyamide coated (min. thickness 350 microns).

Dimensions: (W x L x H) 925 x 925 x 550 mm

Order no. 51205

Plastic linerOrder no. 0500851

A B C D E

A B C D E

A


70

Arcus

Bollards | Leaning posts

Option 1ARCUS bollards, fixedWith extended tubular frame for concreting in, with wire meshinsert with or without hook-in eyelets, 42.5 mm external tube diameter, galvanized and coated.

Dimensions: (W x H) 138 x 900/1250 mm.

Type A B C D EOrder no. 51305 51306 51307 51308 51309

with reflectorsOrder no. 51419 51420 51421 51422 51435

Option 2ARCUS bollards, with round base(As option 1) but for bolting downDimensions (W x H) 138 x 900 mm.

Type A B C D EOrder no. 51310 51311 51312 51313 51314

with reflectorsOrder no. 51424 51425 51426 51427 51428

Option 3ARCUS bollards, removable and lockable(As option 1) locked with triangular lock 17 mm - DIN 22417, with square base plate and ground sleeves for concreting in.

Dimensions: (W x H) 138 x 900 mm.

Type A with reflectorsOrder no. 51315 51430

148

900

1250

148

900

700

ca. 4

00


Aortsfest

Bortsfest


Bollards | Leaning posts71


Option 4ARCUS bollards, folding and lockable(As option 1) locked with triangular lock 17 mm - DIN 22417, with square base plate for bolting down.Dimensions (W x H) 138 x 900 mm.

Type A with reflectorsOrder no. 51316 51433

Option 5ARCUS bollards, folding, with ABUS cylinder lock(As option 1) removable profile half cylinder lock, no problemswith frost or dirt because the lock is only in the bollard when itis locked, i.e. standing upright. Special polyurethane impact pro-tection. Dimensions (W x H) 138 x 900 mm.

Type B fixed with base plate/without mounting accessories

Order no. 51596 51597

incl. reflectors

Option 6 (not illustrated)Triangular lock 17 mm as per DIN 22417

Order no. 0501088

Option 7Mesh barrier for ARCUSTubular steel frame, 38 mm external tube diameter, wire mesh surface, 15 x 15 mm mesh pattern, 3.0 mm wire gauge.Galvanized and RILSAN polyamide coated, with 4 hook-in eyeletsincl. screws for fixing to bollard.


Order no. 51303

Option 8Reflector for ARCUS and ICARUS


Order no. 0500867

2 reflectors are needed for each ARCUS/ICARUS.

Option 9ICARUS bollards, folding and lockable(car-parking spaces)42.5 mm external tube diameter, with wire mesh insert, galva-nized and coated, with 200 x 100 mm rectangular base plate forbolting down.


Type with reflectorsOrder no. 51304 51434

Without accessories for ground mounting

UnisonoUNISONO bollard, flat head, 1 grooveSteel body, round, galvanized and coated, standard version steelglimmer DB 701 and DB 703, standard height 900 mm above fin-ished floor, aluminium head coated to match the body. Fixed, forembedding in concrete, with ground rosette.

Diameter: 76mm, 90mm, 108mm, 121mm, 160mm and 220* mm

*For 220 mm diameter, a choice of over-floor height: 600/700 or800 mm

UNISONO bollard, flat head, 1 groove, removableSteel body, round, galvanized and coated, standard version steelglimmer DB 701 and DB 703, standard height 900 mm above fin-ished floor, aluminium head coated to match the body.Removable, with ground sleeve and ground rosette.



UNISONO bollard, flat head with Pagwood® insert, 1 grooveSteel body, round, galvanized and coated, standard version steelglimmer DB 701 and DB 703, standard height 900 mm above fin-ished floor, aluminium head coated to match the body. Fixed, forembedding in concrete, with ground rosette.

Diameter 121 mm

UNISONO bollard, flat head with Pagwood® insert, 1 groove,removableSteel body, round, galvanized and coated, standard version steelglimmer DB 701 and DB 703, standard height 900 mm above fin-ished floor, aluminium head coated to match the body.Removable, with ground sleeve and ground rosette.

Diameter 121 mm

72 Bollards | Leaning posts


UNISONO bollard, spherical headSteel body, round, galvanized and coated, standard version steelglimmer DB 701 and DB 703, standard height 900 mm above fin-ished floor. Fixed, for embedding in concrete, with groundrosette.

Diameter: 76mm, 90mm, 108mm, 121mm and 160mm

UNISONO bollard, spherical head, removableSteel body, round, galvanized and coated, standard version steelglimmer DB 701 and DB 703, standard height 900 mm abovefinished floor. Removable, with ground sleeve and rosette.

Diameter: 76mm, 90mm, 108mm, 121mm and 160mm

UNISONO bollard, half-round head, 1 grooveSteel body, round, galvanized and coated, standard version steelglimmer DB 701 and DB 703, standard height 900 mm above fin-ished floor, aluminium head coated to match the body. Fixed, forembedding in concrete, with ground rosette.



UNISONO bollard, half-round head, 1 groove, removableSteel body, round, galvanized and coated, standard version steelglimmer DB 701 and DB 703, standard height 900 mm above fin-ished floor, aluminium head coated to match the body.Removable, with ground sleeve and rosette.




Bollards | Leaning posts73



74 Bollards | Leaning posts


Metro

Option 1METRO-S leaning postFixed, with extended tubular frame for concreting in, tubularsteel and wire mesh, 42 mm external tube diameter, 3.0 mm wiregauge, 15 x 15 mm mesh pattern, with foot rest, galvanized andcoated.


Type fixedOrder no. 51521 ca. 550

306

ca.6

00

260

Option 2METRO-P leaning post(As option 1)Fixed, with base plateDimensions: (W x H) 306 x 1500 mm.

Type fixed with base plateOrder no. 51522

Without accessories for ground mounting


Litter bins75


CambioCAMBIO litter bin, with lid, capacity 80 l, wire meshSteel, galvanized and colour coated, octagonal, with up-front,hinged door opening, lockable with triangular lock, on smallrecessed base, inner liner of sheet steel, both front and back sideswith 3 lengthwise recesses with wire mesh decorative inserts,matches Erlau mesh benches.Width 530 mm, depth 410 mm, height 1068 mm

Fixed, for dowelling to cement foundationMovable with a concrete weight (at extra cost)

Available upon request, stainless steel ashtray integrated into the side.

CAMBIO litter bin, with lid, capacity 80 l, Pagwood® insertSteel, galvanized and colour coated, octagonal, with up-front,hinged door opening, lockable with triangular lock, on smallrecessed base, inner liner of sheet steel, both front and back sideswith 3 lengthwise recesses with Pagwood® decorative inserts,matches Erlau Pagwood® benches.Width 530 mm, depth 410 mm, height 1068 mm



CAMBIO litter bin, with lid, capacity 80 l, polyacrylic insertSteel, galvanized and colour coated, octagonal, with up-front,hinged door opening, lockable with triangular lock, on smallrecessed base, inner liner of sheet steel, both front and back sideswith 3 lengthwise recesses with Polyacrylic decorative inserts.Width 530 mm, depth 410 mm, height 1068 mm




76

Vasura®

Option 1Litter bins, steel, without cover, capacity 20 lBin can be detached and locked in position (triangular lock).Dimensions (W x H) 328 x 430 mm, bin - 245 mm.

Type Model Model Model20 O 20 S 20 Wfixed with wall-mounted

hoopsGalvanized and completely colour coatedOrder no. 51458 51462 51464

Fully hot-dip galvanized (without colour coating)Order no. 5145717 5146117 5146317

Aluminium linerOrder no. 0501427

Option 2Litter bins, steel, with ashtray, without cover, capacity 20 l(As option 1) but with ashtray, matching perforated stainlesssteel liner and side slot.

Type Model Model Model20 O-A 20 S-A 20 W-Afixed with wall-mounted.




Model 20 O

fixed

Aluminium

liner

Typ 20 S

with hoops

Typ 20 W

for wall-

mounting

Typ 20 O-A

fixed with

ashtray insert

Typ 20 S-A

with hoops

and ashtray insert

Typ 20 W-A

for wall-mounting with

ashtray insert

ca. 300

ca. 4

00

250

353

430

830

(250

)

Typ 20 O

fixed with post

ca. 300

ca. 4

00

830

100

250

430

353

(250

)

Litter bins


Option 3Stainless steel ashtray insertAluminium ashtray and matching perforated stainless steel liner, to fit all litter bins, capacity 20 l.

Type Ashtray Perforated linerOrder no. 0501357 0501137

365

245

295

1060

1060 43

0

ca. 300ca

. 400

250

ca. 300

ca. 4

00

295

245

830

1060

100

365

250

Typ 20 O-Dfixed,with tubular post

Typ 20 O-A-Dfixed,with tubular post

Typ 20 O-Dfixed,with lid

Aluminiumliner

Typ 20 S-Dwith hoops and lid

Typ 20 W-Dfor wall-mounting,with lid

Typ 20 O-A-Dfixed, with ashtray and lid

Aluminium liner

Typ 20 S-A-Dwith hoops and ashtray

Typ 20 W-A-Dfor wall-mounting,with ashtray and lid

Option 4Steel litter bins, with cover, capacity 20 l.Bins can be detached, tilted downwards (held by a chain) and locked.Dimensions (W x H) 365 x 430 mm, bin - 245 mm.

Type Model Model Model20 O-D 20 S-D 20 W-Dfixed with wall-mounted




Option 5Steel litter bins, with ashtray and lid, capacity 20 l.(As option 4), but with ashtray and matching perforated stain-less steel liner, and side slot.

Type Model Model Model20 O-A-D 20 S-A-D 20 W-A-Dfixed with wall-mounted





Litter bins77



78 Litter bins

Option 6Steel litter bin without lid, capacity 35 l.Bin can be detached and locked in position (triangular lock).Dimensions (W x H) 390 x 525 mm, bin - 300 mm diameter.

Type Model 35 O fixedGalvanized and completely colour coatedOrder no. 51466

Fully hot-dip galvanized (without colour coating)Order no. 5146517


Option 7Steel litter bins with ashtray, without lid, capacity 35 l.(As option 6) but with ashtray and matching stainless steel per-forated insert, and side slot.

Type Model 35 O-A fixedGalvanized and completely colour coatedOrder no. 51498

Fully hot-dip galvanized (without colour coating)Order no. 5149717


300

405

830

520

ca. 4

00

(250

)

ca.300

Typ 35 Ofixed, with post

Typ 35 Ofixed

Aluminium liner

Option 8Litter bins, with stainless steel container, without lid, capacity 35 lBin can be detached and locked in position (triangular lock).Dimensions (W x H) 390 x 525 mm, bin - 300 mm diameter.Steel frame, galvanized and colour coated.

Type Model 35 O Stainless steelOrder no. 52577


300

405

830

520

ca. 4

00

(250

)

ca.300

Typ 35 Ofixed, with post

Typ 35 Ofixed

Aluminium liner

Aluminium liner

300

405

830

520

ca. 4

00

(250

)

120

ca. 300

Typ 35 O-Afixed, with post

Typ 35 O-Afixed, withpost


Option 11Litter bins, steel, with lid, capacity 35 lBin can be detached, tilted downwards (held by a chain) and locked in position (triangular lock).Dimensions (W x H) 390 x 525 mm, bin - 300 mm diameter.

Type Model Model35 O-D 35 M-Dfixed movable

Galvanized and completely colour coatedOrder no.. 51482 51484

Fully hot-dip galvanized (without colour coating)Order no. 5148117 5148317


Option 12Litter bins, with ashtray and lid, capacity 35 l(As option 8) but with ashtray and matching stainless steel perforated liner, and side slot.

Type Model Model35 O-A-D 35 M-A-Dfixed movable

Galvanized and completely colour coatedOrder no. 51514 51516

Fully hot-dip galvanized (without colour coating)Order no. 5151317 5151517


ca. 300

ca. 4

00

300

440

830

1060

ca. 125

250

Typ 35 O-Dfixed, with post

Typ 35 O-Dfixed, with lid

Typ 35 M-Dmovable with lid

Option 9Litter bins, with ashtray, stainless steel container, without lid, capacity 35 lBin can be detached and locked in position (triangular lock).Dimensions (W x H) 390 x 525 mm, bin - 300 mm diameter, withashtray and matching stainless steel perforated liner. Steel frame, galvanized and colour coated.

Type Model 35 O-A stainless steelOrder no. 52578


Aluminium liner

300

405

830

520

ca. 4

00

(250

)

120

ca. 300

Typ 35 O-Afixed, with post

Typ 35 O-Afixed,with post

ca. 300

ca. 4

00

300

440

830

106

ca. 85

(250

)

120

520

Typ 35 O-A-Dfixed, with post


Typ 35 M-A-Dmovable with lid

Option 10Ashtray insertAluminium ashtray consisting of aluminium container andmatching perforated stainless steel liner, to fit all litter bins,capacity 35 l.



Litter bins79



80 Litter bins


Option 15Ashtray insertAluminium ashtray and matching perforated stainless steel linerfor all litter bins, capacity 35 l.


Option 13Litter bins, with stainless steel container, with lid, capacity 35 lThe bins can be detached, and locked in position. (Triangular lock)Dimensions (W x H) 390 x 525 mm, bin diameter 300 mm.Steel frame and lid, galvanized and colour-coated.

Type Model Model35 O-D 35 M-Dstainless steel stainless steelfixed movable

Order no. 51977 51979


Option 14Litter bins with ashtray and lidStainless steel container, capacity 35 lThe bins can be detached and locked in position. (Triangular lock)Dimensions (W x H) 390 x 525 mm, bin diameter 300 mm.Steel frame and lid, galvanized and colour-coated.

Type Model Model35 O-A-D 35 M-A-Dstainless steel Nirostafixed movable

Order no. 51982 51983


ca. 300

ca. 4

00

300

440

830

1060

ca. 125

250

Typ 35 O-Dfixed, withpost

Typ 35 O-Dfixed, with lid

Typ 35 M-Dmovable with lid

ca. 300

ca. 4

00

300

440

830

106

ca. 85

(250

)

120

520



Typ 35 M-A-Dmovable


Litter bins81


ca. 4

00

535

ca. 2

75

365

600

960

1223

Option 16Steel litter bins, without lid, capacity 60 l.Bin can be swivelled, unhooked and locked (triangular lock).

Dimensions: (W x H) 535 x 600 mm, bin diameter - 365 mm.

Type Model Model60-O 60-Mfixed movable

Galvanized and colour-coated, hot-dip galvanized tubular frame.Order no. 51256 51258

Galvanized and completely colour-coatedOrder no. 51255 51257

Fully hot-dip galvanized (without colour-coating)Order no. 5923917 5933917

Stainless steel bin, hot-dip galvanized and colour-coated tubular frameOrder no. 5923923 5933923

Aluminium linerWith 2 handles, can also be used with litter bin model 60 lDimensions: (H) 590 mm, diameter 345 mm.

Order no. 0501431

Option 17Steel litter bin, without lid, capacity 60 l, with ashtrayBin can be swivelled, unhooked and locked (triangular lock), with 2-part stainless steel ashtray.

Dimensions: (W x H) 535 x 600mm, Total height above finished floor960 mm, bin diameter – 365 mm.(We recommend an aluminium liner, at extra cost)

Type Model Model60 O-A 60 M-Afixed movable

Available in the following variations:Bin colour-coated, hot-dip galvanized tubular frame

Bin and tubular frame colour-coated

Bin and tubular frame fully hot-dip galvanized

Stainless steel bin, colour-coated tubular frame


82 Litter bins


ca. 4

00

535

ca. 2

7560

0

85

1220

1485

ø 365

Option 18Steel litter bins, with lid, capacity 60 l.Bin can be swivelled, unhooked and locked (triangular lock).Dimensions (W x H) 535 x 600 mm, bin diameter - 365 mm.

Type Model Model60 O-D 60 M-Dfixed movable

Bin galvanized and colour-coated, hot-dip galvanized tubular frameOrder no. 59238 59348

Galvanized and completely colour-coatedOrder no. 59237 59347

Fully hot-dip galvanized (without colour-coating)Order no. 5923817 5934817

Stainless steel bin, lid and tubular frame hot-dip galvanized or colour-coated Order no. 5923823 5934823

Aluminium linerWith 2 handles, can also be used with litter bin model 60 lDimensions: (H) 590 mm, diameter 345 mm.

Order no. 0501431

Option 19Steel litter bin, capacity 60 l, with lid and ashtrayBin can be swivelled, unhooked and locked (triangular lock), with2-part stainless steel ashtray.Dimensions (W x H) 535 x 600mm, Total height above finishedfloor 1220 mm, bin diameter – 365 mm.(We recommend an aluminium liner, at extra cost)

Type Model Model60 O-A-D 60 M-A-Dfixed movable

Available in the following variations:Bin colour-coated, hot-dip galvanized tubular frame

Bin and tubular frame colour-coated

Bin and tubular frame fully hot-dip galvanized

Stainless steel bin, colour-coated tubular frame

Aluminium linerWith 2 handles, can also be used with litter bin model 60 lDimensions (H) 590 mm, diameter 345 mm

Order no. 0501431


Litter bins83

Option 20Lugs for fixing VASURA bins to the groundhot-dip galvanized, for 45 mm tube diameterVASURA movable 60 l

Order no. 58540

Option 21Community litter bins 110 lOuter bin made of Duropal polyethylene, in the colours*: green,red or blue. Galvanized sheet steel liner.With sack dispenser, automatic fire extinguishing plate andcement base for stability. It can be bolted to the ground. Dimensions: 500 mm diameter, height 1072 mm, weight 30 kg.

Type without ashtray with ashtrayOrder no. 5119899 5110899

*Other colours on request.

Option 22Topsy litter bins 85 lOuter bin made of double-walled, coloured polyethylene. Available in many standard colours. With galvanized sheet steelliner. Unique design with practical lock. Wide openings on bothsides for easy, hygienic waste disposal. Many optional additionalfeatures.Dimensions: 470 mm diameter, height 990 mm, weight 12 kg.

Type StandardOrder no. 5194700

Please request our complete Glasdon product-line catalogue “Environment in Focus”.In it you will find a broad selection of litter bins and products for municipal cleaning jobs.


Option 23SMOKY upright ashtrayTrapezoid steel bin, galvanized and colour-coated in dark grey,stainless-steel slot surround and perforated plate, lockable with 8 mm square spanner, with accessories for bolting to theground.Dimensions:height 1000 mm, width 207 mm, depth 250 mm, weight 13.7 kg

Type compl. stainless-steel grey colour-coatedOrder no. 501602 501083

Option 24SPLASH litter bins 85 lPolyethylene bin, colour blue, door white, can be unhooked without key.Dimensions: height 1180 mm, width 915 mm, weight 23 kg, withinsert made of galvanized sheet steel or polyethylene.Available optionally with or without additional 30 kg concreteweight.

Type with galvanized with polyethylenesheet steel insert insert

Order no. with ZS-G 0501084 with ZS-G 0501085Order no. without ZS-G 05000822 without ZS-G 0501086

More about Glasdon products in the new catalog “Environment in Focus”.


84 Litter bins



85 Renovation and replacement


Olympia

Floor or wall mounting components not included.

Note:Each OLYMPIA layout begins at the left-hand end with astraight or curved basic unit. The rest consists of add-on units.

This does not apply to complete circles (see diagram).A circle consists of twelve 30° add-on units.

Option 1Basic unit, 2-seat bench, straightOlympia features: seat with knee roll, backrest with plateau top,galvanized and colour-coated tubular steel feet.Seat and backrestmade of tubular steel and wire mesh, external tube diameter 30mm, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, galvanizedand RILSAN polyamide coated (min. thickness 350 microns).Dimensions (W x D x H) 1225 mm x 830 mm x 755 mm, seatheight 450 mm.

Type A B C Dfixed fixed with movable wall-

base plate mountedOrder no. 51332 51333 51334 51708

Fixed


Renovation and replacement86


Option 2Add-on unit, 2-seat bench, straightOlympia features: seat with knee roll, backrest with plateau top (as option 1).DimensionsW x D x H) 1225 mm x 830 mm x 755 mm, seat height 450 mm.

Type A B C Dfixed fixed movable wall-

with base mountedplate

Order no. 51335 51336 51337 51709

Option 3Basic unit, single seat, curved 30°, facing inwardsOlympia features: seat with knee roll, backrest with plateau top.Tapered Olympia seats with bowed longitudinal wires arrangedradially. Tubular steel feet, galvanized and colour coated. Seatand backrest made of tubular steel and wire mesh, external tubediameter 30 mm, wire gauge 3.0 mm, mesh pattern 15 x 15 mm,galvanized and RILSAN polyamide coated.Dimensions: outer radius 1904 mm, depth 830 mm, height 755mm, seat height 450 mm.

Type A B Cfixed fixed movable

with baseplate

Order no. 51350 51351 51352

Option 4Add-on unit, single seat, curved 30°, facing inwardsOlympia features: seat with knee roll, backrest with plateau top (as option 3). Tapered Olympia seats with bowed longitudinalwires arranged radially.Dimensions: outer radius 1904 mm, depth 830 mm, height 755mm, seat height 450 mm.


with baseplate

Order no. 51353 51354 51355

Option 5Basic unit, single seat, curved 30°, facing outwardsOlympia features: seat with knee roll, backrest with plateau top (as option 3). Tapered Olympia seats with bowed longitudinalwires arranged radially.Dimensions: outer radius 2030 mm, depth 830 mm, height 755mm, seat height 450 mm


with baseplate

Order no. 51356 51357 51358




Option 6Seat S with straight subframe and supportOlympia features: Seat with knee roll, backrest with plateau topas armrest. Subframe and tubular steel feet galvanized andcolour coated. Tubular steel and wire mesh seat and backrest,external tube diameter 30 mm, wire gauge 3.0 mm, mesh pattern15 x 15, galvanized and RILSAN polyamide coated (min. thickness350 microns), a supporting foot is required after 3 seats.

Dimensions: width 585 mm, depth 830 mm, seating height 450 mm

Order no. 5253400

Type A B C Dfixed fixed movable wall-

with base mountedplate

Option 7Seat S with subframe and support curved to specific radiusOlympia features: Seat with knee roll, backrest with plateau topas armrest. Frame radius not under 3000 mm.

When ordering, please include a layout plan with radius andsector dimensions, as well as the desired seat direction (facinginward/outward).

Dimensions: width 575 mm, depth 830 mm, seating height 450 mm

Order no. 5832200


with baseplate

Example:Seat S3-seater



908

328

809

582

450

810

200

Replica

Option 1REPLICA seat unit, 2-seater, straightOne-piece seat and back, 30 mm diameter tubular steel frame, wire mesh seat and back surfaces, 3.0 mm wire gauge, 15 x 15mm mesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns). Suitable for all Olympia subframeswith 100 x 40 mm cross supports.Dimensions(W x D x H) 1200 mm x 597 mm x 810 mm, seat height 450 mm

Type without armrest armrest armrestarmrest right left both sides

Order no. 52044 52056 52045 52057

Price does not include subframes and supports

REPLICA seat components have been designed to be mounted onthe existing subframes in place of damaged OLYMPIA benches.Because of their extremely stable construction, they are recom-mended for use in locations where Olympia components havebeen subject to vandalism. Substantial expenditure can be savedwhere the foundations and subframes have not been affected.

The OLYMPIA benches of the first generation had the disadvan-tage that leaves and rubbish could collect between the seat and back parts. The use of REPLICA makes that a thing of the past.

Of course, you can still replace or renovate damaged OLYMPIAwith OLYMPIA. Renovation involves the old coating being re-moved in our works, the unit is then sandblasted, regalvanizedand recoated - in a new colour if requested. A new 10 year anti-rust guarantee is also given. Please contact us or our works repre-sentatives.

Option 2REPLICA seat unit, 1-seater, curved facing inwards, 30°One-piece seat and back, 30 mm diameter tubular steel frame, wire mesh seat and back surfaces, 3.0 mm wire gauge, 15 x 15mm mesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns). Suitable for all Olympia subframeswith 100 x 40 mm cross supports.Dimensions(W x D x H) 908 mm x 582 mm x 810 mm, seat height 450 mm


Order no. 52062 52064 52063 52065


597

450

810

200

1200

328

1225100


661

328

809

582

450

810

200


Renovation and replacement89


Option 3REPLICA seat unit, 1-seater, curved facing outwards, 30°One-piece seat and back, 30 mm diameter tubular steel frame, wire mesh seat and back surfaces, 3.0 mm wire gauge, 15 x 15 mmmesh pattern, galvanized and RILSAN polyamide coated (min.thickness 350 microns). Suitable for all Olympia subframes with100 x 40 mm cross supports.

Dimensions:(W x D x H) 908 mm x 582 mm x 810 mm, seat height 450 mm


Order no. 52058 52060 52059 52061


Warming column


BRASERO warming columnStainless-steel column for heating an area, with a vertical row ofthree infrared lamps.

Technical details:Height 214 cm, diameter 32 cm, weight 70 kg.

Output: 6,000 watts (3 x 2,000 watts)Power: electricMaterial: stainless-steelVoltage: 230 / 400 V, three-phase + neutralGuarantee: 1 year

Brasero Base for Spare lampswarming column easier mounting (2,000 W)

90

Documents

Outdoor Furniture - Technical Documentation...Erlau Outdoor Furniture Technical Documentation | Table of contents Benches 02 Alpha 03 Artesit 04 Avenida 16 Charisma 05 Esplanade 06