Upload
buithu
View
221
Download
0
Embed Size (px)
Citation preview
Electronic Materials
Our Expertise in Quality Control
Committed to a changing world
G-C
AE
/QC
_010
9Be0
3
BASF’s Business Unit Electronic Materials
Singapore
BASF South East Asia Pte Ltd.
35 Tuas West Avenue,
Singapore 638433
Phone: +65 6868 9123
Fax: +65 6868 9168
Malaysia
BASF (Malaysia) Sdn. Bhd.
Lot 7, Jalan Hi-Tech 4,
Phase 1 Industrial Zone,
Kulim Hi-Tech Industrial Park,
09000 Kulim, Kedah, Malaysia
Phone: +604 403 3272
Fax: +604 403 3275
Germany
BASF SE
Competence Center Analytics
GKA/E – M320,
67056 Ludwigshafen,
Germany
Phone: +49 621 60 79788
Fax: +49 621 60 52955
Taiwan
BASF Electronic Materials Taiwan Ltd.
No. 33, Ching Chien 1st Road,
Kuanyin Industrial Park,
Taoyuan 32853, Taiwan
Phone: +886 3 483 7701
Fax: +886 3 483 8437
China
BASF Electronic Materials (Shanghai) Co., Ltd.
No. 16, Heng Er Road,
Qing Pu Export Processing Zone,
Shanghai, 201700, P.R. China
Phone: +86 21 5970 5700
Fax: +86 21 5970 5770
www.electronic-materials.basf.com
NoteThe data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and
application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee
of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights, etc., given
herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our
products to ensure that any proprietary rights and existing laws and legislation are observed. (January 2009)
® = Registered trademark of BASF SE
02 0302 03
Reliability and Intelligence for a Changing World
BASF – A Partner You can Rely On
BASF has been providing electronic materials for more than 25 years. Our solutions and services extend from semiconductors and flat panel displays to the solar cell industry.
As a leading supplier, we not only produce and supply consistently high purity chemical solutions, we also continuously develop new chemical applications to meet future market requirements. These require a high level of analytical expertise and the continual enhancement of analytical methods and equipment.
Our Quality Control team is at the forefront of ensuring BASF’s customers receive reliable chemical solutions that will help them to be more successful.
Our experience and expertise enables us to offer intelligent, analytical techniques that bring real value to our products.
BASF is certified with all the accreditation that counts, including ISO 9001, ISO 14001 and OHSAS 18001. We also operate accredited laboratories with ISO 17025 accreditation in Germany, Singapore and Taiwan, while our facilities in China and Malaysia also operate under strict 17025 guidelines.
We are proud to have been the first company among electronic chemicals suppliers in Taiwan to receive ISO 17025 accreditation; a strong testament to our commitment to quality for our products.
02 0302 03
Reliability and Intelligence for a Changing World
BASF – A Partner You can Rely On
BASF has been providing electronic materials for more than 25 years. Our solutions and services extend from semiconductors and flat panel displays to the solar cell industry.
As a leading supplier, we not only produce and supply consistently high purity chemical solutions, we also continuously develop new chemical applications to meet future market requirements. These require a high level of analytical expertise and the continual enhancement of analytical methods and equipment.
Our Quality Control team is at the forefront of ensuring BASF’s customers receive reliable chemical solutions that will help them to be more successful.
Our experience and expertise enables us to offer intelligent, analytical techniques that bring real value to our products.
BASF is certified with all the accreditation that counts, including ISO 9001, ISO 14001 and OHSAS 18001. We also operate accredited laboratories with ISO 17025 accreditation in Germany, Singapore and Taiwan, while our facilities in China and Malaysia also operate under strict 17025 guidelines.
We are proud to have been the first company among electronic chemicals suppliers in Taiwan to receive ISO 17025 accreditation; a strong testament to our commitment to quality for our products.
04 0504 05
Statistical methods are routinely used for documenting the quality of our products. The results are reported to our customers on a regular basis via our established laboratory Information management system (LIMS). With the ability to store and keep track of large amounts of data, LIMS ensures better quality control checks, increased accuracy and the elimination of data entry via on-line instruments.
Our labs are always ready when you need them the most, standing by 24 hours a day, seven days a week to provide continuous customer support and fast turn around times.
Everything we do is driven by our uncompromising commitment to quality.
From the initial inspection of raw materials, to throughout the processing and onto the final inspection, our rigorous quality control ensures reliability and performance.
The quest for continuous analytical improvement and development is never-ending at BASF. And it is the same for customer service: from the ease of start-ups and certification, to troubleshooting and inter-laboratory comparison, our labs deliver quality that matters.
Skill and specialization are key factors for analytical accuracy. At BASF, each specialist possesses expert knowledge of the relevant instruments and methods and takes full responsibility for their specialized area.
Quality that Matters
Primed to Perform
BASF has endowed its laboratories with the world’s most advanced tools and analytical techniques.
The major techniques applied in our QC laboratories can be grouped into five analytical categories:
1. Assay
Assay determination by:
Auto-titration Gas Chromatography (GC) UV-Vis spectrometry Total Organic Carbon (TOC) analysis Karl Fischer (KF) titration High performance liquid chromatography (HPLC)
2. Anion impurity analysis
Anion impurity determination by:
Ion chromatography (IC) Turbidimetry UV-Vis spectrometry Wet chemistry methods
3. Trace Metal Analysis
Trace metal determination by:
Inductively coupled plasma mass spectrometry (ICP-MS), including high resolution ICP-MS (HR-ICP-MS)
Inductively coupled plasma optical emission spectrometry (ICP-OES)
Graphite furnace atomic absorption spectrometry (GF-AAS)
To operate in harmony with today’s advanced sample pretreatment techniques, we can analyze the trace metal impurities of chemicals to single digit ppt levels.
4. Liquid Particle Measurement
Particle determination by:
Liquid particle counters Particle size distribution analyzer Single particle optical size analyzer
5. Other Properties
Other properties determined are:
pH value Density Surface tension Conductivity Viscosity Etching rate
BASF’s laboratories are also fully qualified to perform a broad range of inspection for BASF’s process chemicals, including those for:
Cleaning Etching Photolithography Chemical Mechanical Planarization Wet Deposition
04 0504 05
Statistical methods are routinely used for documenting the quality of our products. The results are reported to our customers on a regular basis via our established laboratory Information management system (LIMS). With the ability to store and keep track of large amounts of data, LIMS ensures better quality control checks, increased accuracy and the elimination of data entry via on-line instruments.
Our labs are always ready when you need them the most, standing by 24 hours a day, seven days a week to provide continuous customer support and fast turn around times.
Everything we do is driven by our uncompromising commitment to quality.
From the initial inspection of raw materials, to throughout the processing and onto the final inspection, our rigorous quality control ensures reliability and performance.
The quest for continuous analytical improvement and development is never-ending at BASF. And it is the same for customer service: from the ease of start-ups and certification, to troubleshooting and inter-laboratory comparison, our labs deliver quality that matters.
Skill and specialization are key factors for analytical accuracy. At BASF, each specialist possesses expert knowledge of the relevant instruments and methods and takes full responsibility for their specialized area.
Quality that Matters
Primed to Perform
BASF has endowed its laboratories with the world’s most advanced tools and analytical techniques.
The major techniques applied in our QC laboratories can be grouped into five analytical categories:
1. Assay
Assay determination by:
Auto-titration Gas Chromatography (GC) UV-Vis spectrometry Total Organic Carbon (TOC) analysis Karl Fischer (KF) titration High performance liquid chromatography (HPLC)
2. Anion impurity analysis
Anion impurity determination by:
Ion chromatography (IC) Turbidimetry UV-Vis spectrometry Wet chemistry methods
3. Trace Metal Analysis
Trace metal determination by:
Inductively coupled plasma mass spectrometry (ICP-MS), including high resolution ICP-MS (HR-ICP-MS)
Inductively coupled plasma optical emission spectrometry (ICP-OES)
Graphite furnace atomic absorption spectrometry (GF-AAS)
To operate in harmony with today’s advanced sample pretreatment techniques, we can analyze the trace metal impurities of chemicals to single digit ppt levels.
4. Liquid Particle Measurement
Particle determination by:
Liquid particle counters Particle size distribution analyzer Single particle optical size analyzer
5. Other Properties
Other properties determined are:
pH value Density Surface tension Conductivity Viscosity Etching rate
BASF’s laboratories are also fully qualified to perform a broad range of inspection for BASF’s process chemicals, including those for:
Cleaning Etching Photolithography Chemical Mechanical Planarization Wet Deposition
06 0706 07
Global Reach, Local Touch
Using analytical techniques and experience drawn from the entire BASF Group, we can provide customers with expert analysis services throughout our established network of strategically located QC laboratories in key markets.
BASF’s QC network for Electronic Materials covers:
Germany Taiwan Singapore Malaysia China
This vigorous, global network provides reciprocal technical support and knowledge transfer. Round-robin tests are performed on a regular basis to ensure that our analytical competence remains first-rate, worldwide.
Committed to a Changing World
At BASF, we are always moving forward.
With our analytical capability and established history in electronic materials, we consistently deliver reliable and intelligent solutions for our customers.
Our customers’ industries are constantly evolving and we are committed to being at the forefront of the latest developments. Change is what drives us to continue to provide the comprehensive analytical services that meet our customers evolving needs and make them even more successful.
That’s why BASF is “Committed to a Changing World”.
China
Taiwan
MalaysiaSingapore
Germany
And we share our experience with our customers.
BASF works closely with customers by organizing technical workshops and training courses to provide our customers’ staff with information of BASF’s quality control systems, facilities and our latest developments.
Electronic Materials’ QC Network
06 0706 07
Global Reach, Local Touch
Using analytical techniques and experience drawn from the entire BASF Group, we can provide customers with expert analysis services throughout our established network of strategically located QC laboratories in key markets.
BASF’s QC network for Electronic Materials covers:
Germany Taiwan Singapore Malaysia China
This vigorous, global network provides reciprocal technical support and knowledge transfer. Round-robin tests are performed on a regular basis to ensure that our analytical competence remains first-rate, worldwide.
Committed to a Changing World
At BASF, we are always moving forward.
With our analytical capability and established history in electronic materials, we consistently deliver reliable and intelligent solutions for our customers.
Our customers’ industries are constantly evolving and we are committed to being at the forefront of the latest developments. Change is what drives us to continue to provide the comprehensive analytical services that meet our customers evolving needs and make them even more successful.
That’s why BASF is “Committed to a Changing World”.
China
Taiwan
MalaysiaSingapore
Germany
And we share our experience with our customers.
BASF works closely with customers by organizing technical workshops and training courses to provide our customers’ staff with information of BASF’s quality control systems, facilities and our latest developments.
Electronic Materials’ QC Network
Electronic Materials
Our Expertise in Quality Control
Committed to a changing world
G-C
AE
/QC
_010
9Be0
3
BASF’s Business Unit Electronic Materials
Singapore
BASF South East Asia Pte Ltd.
35 Tuas West Avenue,
Singapore 638433
Phone: +65 6868 9123
Fax: +65 6868 9168
Malaysia
BASF (Malaysia) Sdn. Bhd.
Lot 7, Jalan Hi-Tech 4,
Phase 1 Industrial Zone,
Kulim Hi-Tech Industrial Park,
09000 Kulim, Kedah, Malaysia
Phone: +604 403 3272
Fax: +604 403 3275
Germany
BASF SE
Competence Center Analytics
GKA/E – M320,
67056 Ludwigshafen,
Germany
Phone: +49 621 60 79788
Fax: +49 621 60 52955
Taiwan
BASF Electronic Materials Taiwan Ltd.
No. 33, Ching Chien 1st Road,
Kuanyin Industrial Park,
Taoyuan 32853, Taiwan
Phone: +886 3 483 7701
Fax: +886 3 483 8437
China
BASF Electronic Materials (Shanghai) Co., Ltd.
No. 16, Heng Er Road,
Qing Pu Export Processing Zone,
Shanghai, 201700, P.R. China
Phone: +86 21 5970 5700
Fax: +86 21 5970 5770
www.electronic-materials.basf.com
NoteThe data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and
application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee
of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights, etc., given
herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our
products to ensure that any proprietary rights and existing laws and legislation are observed. (January 2009)
® = Registered trademark of BASF SE