Our Equipment

Fluke DSX-5000-QI-AP

Fluke Cable IQ Qualification Tester

Sumitomo Electric Fusion Splicer

SC FAST CONNECTOR TERMINATION TOOLS

Application

SC Fast Connector is widely used in FTTH (Fiber To The Home) access optical Networks. Designed

for simple and fast field termination of single fibers without polishing, adhensives or curing process.

SC Fast Connector uses Sumitomo’s guide rail technology to help position the fibre into the connector,

achieving a positive connection in the mechanical splice and low insertion loss termination.

For Singlemode Fiber, Multimode Fiber, as well as choose to 900 microns, 3.0mm and the

introduction of cable 8 font type.

Fasten design makes installation easy. For connecting to other devices and fiber optic panels.

No electrical power supply is needed to assemble the Fast SC Connector.

Fiber termination tools: -

√ Fiber Cleaver √ Fiber Coating Layer Stripping

√ 2core FTTH Drop Fiber Cable Strippes √ Template cut-plate

√ Opener for SC Fast Connector √ Alcohol and wipe papers

Specifiaction

Fiber Optic Cable 2.0mmx3.0mm

Plug Type SC/PC

Fiber diameter 0.125mm

Fiber Mode Singlemode

Insertion Loss <0.5dB (typical 0.2dB)

Return Loss <50dB

Tensile strength <20N

Temperature -40℃—+70℃

Temperature cycling IL<0.3dB，RL<5dB

EXFO FTB-1 PLATFORM

Promax HD Ranger + for TV, SAT Analysers & Optical Fibre

Digital LCD Satellite Finder Meter DVB-S Sat-Link WS-6906

( Hi-Quality DVB-S Digital LCD Satellite Finder Meter )

Digital LCD Satellite Finder Meter Plus Download and Watch All FTA Digital Satellite

Channels On Colour LCD Screen Sat-link WS-6906

Description :

View the actual channel on the screen of the meter.

Quickly and accurately align the satellite dish and instantly check the stability of

the channel right on the screen of the meter.

Transponders, Frequency, Symbol Rate, Polarity, and other settings can be

modified by the user.

There is never a need to send your meter in for upgrade.

The meter never needs to be returned for re-calibration due to the unique

calibration system built in to the meter. Each time the meter boots up it

automatically calibrates for optimum performance so you can align each install

with confidence.

Special Features Include :

View All The Actual FTA Satellite Channels On The Meters Screen.

Auto Re-Calibration Due To The Unique Calibration System Built in to the

Meter.

Automatically Calculates Dish Angles And Settings Based On Your

Longitude And Latitude.

Calculates Your Dish Angles and Alignment Settings so you can quickly and

accurately align the satellite dish and you can instantly check the stability of

the channel right on the screen of the meter.

Each time the meter boots up it automatically calibrates for optimum

performance so you can align each install with confidence.

All Transponders, Frequency, Symbol Rate, Polarity, and other settings can be

modified by the user.

View All FTA Satellite Channels On Screen With Sound.

Other Features Include :

3.5 inch LCD Colour Screen

Live FTA Digital Picture and Sound

AV in and AV out function

Watch Free channels

Sound warning prompt locking satellite

Bit Error Rate Readout

Carrier to Noise Readout

dBuV Readout

Lithium-ion 1950mA Battery

DiSEqC & 22kHz Switch Control

Fully DVB Compliant

Freq range: 950mHz-2150mHz

Signal level: 65dbm~25dbm

Symbol rate: 2mbps~45mbps

Video format: PAL/NTSC/SECAM

Software Upgradeable via USB

Size: 158x95x45,Very small and portable

Dagatron CATV/TV Level Meter

Handheld portable CATV/TV Level Meter, 5 to 862MHz, 99 Channel Memory, Audio

carrier selectable

Feature :

Handheld, portable CATV/TV Signal Strength Meter

PLL tuning control for Frequency Selection

Video & Audio Level Measurement

Audio Sub carrier selectable (4.5, .5, 6.0, 6.5 MHz)

Line voltage Measurement (AC/DC auto selection)

Auto Attenuator control (IF : 20dB, RF : 25dB)

Built in Rechargeable Battery pack

Auto power off

99 Favourite Channel Memory

Buzzer for Acoustic signal strength monitoring

Level Peak Holder Function

Multi LCD display with Back light

Last condition Store & memory

Key Entry control

Deluxe HANG-ON-NECK type CARRYING CASE for hand-free use

Kyoritsu Digital Earth Tester

Features

In addition to the facility for precision measurement, test leads for simplified two wire

measuring system also supplied as standard accessories.

Dust and drip proof. (Designed to IEC 60529 IP54).

Designed to meet IEC 61010-1 safety standard.

Capable of measuring earth voltage.

Small and lightweight shock resistance case material.

2mA measuring current permits earth resistance tests without tripping earth leakage

current breakers in the circuit under test.

Specifications

Measurement Ranges Earth Resistance: 0 to 20Ω, 0 to 200Ω, 0 to 2000Ω

Earth Voltage: 0 to 200V AC 50/60Hz

Accuracy

Earth Resistance: ±2% of reading ±0.1Ω (20Ω range)

±2% of reading ± 3 digits (200Ω, 2000Ω range)

Earth Voltage: ±1% of reading ± 4 digits

Overload Protection

Earth Resistance: 280V AC for 10 seconds across two of

the three terminals.

Earth Voltage: 300V AC for 1 minute

Safety Standard IEC 61010-1 CAT III 300V Pollution Degree 2 IEC 61557

Applicable Standards IEC 60529 IP54

Withstand Voltage 3700V AC for 1 minute

E

Kyoritsu Insulation Tester

Analogue Insulation / Continuity Tester

Overview :

A lightweight and compact insulation and continuity tester from the manufacturer, Kyoritsu.

Applications :

Suitable for insulation and continuity testing with three insulation settings of 250V, 500V and

1000V. Auto ranging for both insulation and continuity.

Tests

Insulation resistance (250V500V/1000V)

Continuity (50Ω/200Ω)

Insulation measurements

Measuring range - 0~100MΩ (1MΩ), 0~200MΩ (2MΩ), 0~400MΩ (4MΩ),

Output voltage on open circuit - Rated test voltage +10%

Rated current - 0.8mA DC approx.

Output short circuit current - 2mA DC approx.

Accuracy guaranteed ranges - 0.05~10MΩ/0.1~20MΩ/0.2~40MΩ

Accuracy - ±5% of indicated value

Continuity Measurements

Measuring range - 5Ω

Output voltage on open circuit - 600mV DC approx.

Output short circuit current - 300mA approx.

Accuracy - ±3% of full scale length

General

Withstand Voltage - 2200V AC for 1 minute & Power Source - R6P(AA)(1.5V) × 8

Letatwin Electronic Lettering Machine

Features

LETATWIN LM-380A is entirely new designed lettering machine for professional use of both

tube and label marking with many attractive and user-friendly features.

Electronic Lettering Machine ( LM380A ) :

MAX LETATWIN LM-380A is entirely new designed lettering machine for

professional use of both tube and label marking with many attractive and user-friendly

features.

High-speed marking :

LM-380A has a new designed thermal head that provides you with marking speed at

25mm / second

Heavy-Duty Performance :

LM-380A is designed for heavy duty marking operation.

High-speed marking :

LM-380A can mark approximate 35pcs of 20mm-length tube per minute.

Heavy-duty Performance :

LM-380A is designed for heavy-duty marking available + Heat-shrinkable tube.

2.5 mm ID ~ 5.5 mm ID tubes are applicable.

MAX genuine tapes of 5mm, 9mm and 12mm width are

Easy access to your PC :

380A can import text and setting data from PC with standard compact flash easily and

faster for big-volume markings.

40,000 characters built-in large memory storage :

(2000 characters X 20 files)

Large LCD display in English

LCD dot matrix : 64x132 pixel