2
FEATURES OF THE OTTO MULTI-PORT HUB • 3 separate Push-To-Talk (PTT) buttons • Up/Down volume, On/Off control buttons • Single/Dual/Triple Comm modularity • Molle attachment system included • Left hand, Right hand reversible • Compatible with major radio platforms • Modular cables for each radio/device • Volume control +/-12dB for amplified hearing • Meets MIL-STD-810G specifications • IP68 immersion rated 3 ft./31 minutes • No batteries required • Compatible with both Android and iOS Devices ©2018 OTTO Engineering, Inc., ®OTTO and the OTTO Expect Excellence logo are registered trademarks of OTTO Engineering, Inc. All rights reserved. MKT 2018-17 OTTO Multi-Port Hub INTEGRATED COMMUNICATIONS WITH THE NOIZEBARRIER TAC AND NOIZEBARRIER H3 HEADSETS The OTTO Multi-Port Hub is compatible with major radio platforms using detachable cables for each radio. In addition, the Multi-Port Hub offers modular compatibility with vehicular and air based intercoms (ICS). Situational awareness (talk-through) can be controlled using either the volume controls (+/- 12dB) on the NoizeBarrier TAC headset or on the Multi- Port Hub. In conjunction with the Multi-Port Hub, the NoizeBarrier H3 and NoizeBarrier TAC headsets provide modular control of up to three unique communications platforms, each with a separate Push-To-Talk (PTT) button. www.ottofedmil.com Toll-free: 1-888-234-6886 Direct: 1-847-428-7171 Designed, manufactured and engineered in the U.S.A for over 50 years. Detail: Side A Detail: Side B

OTTO Multi-Port Hub

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

Page 1: OTTO Multi-Port Hub

FEATURES OF THE OTTO MULTI-PORT HUB

• 3 separate Push-To-Talk (PTT) buttons

• Up/Down volume, On/Off control buttons

• Single/Dual/Triple Comm modularity

• Molle attachment system included

• Left hand, Right hand reversible

• Compatible with major radio platforms

• Modular cables for each radio/device

• Volume control +/-12dB for amplified hearing

• Meets MIL-STD-810G specifications

• IP68 immersion rated 3 ft./31 minutes

• No batteries required

• Compatible with both Android and iOS Devices

©2018 OTTO Engineering, Inc., ®OTTO and the OTTO Expect Excellence logo are registered trademarks of OTTO Engineering, Inc. All rights reserved. MKT 2018-17

OTTO Multi-Port Hub INTEGRATED COMMUNICATIONS WITH THE NOIZEBARRIER™ TAC AND NOIZEBARRIER™ H3 HEADSETS

The OTTO Multi-Port Hub is compatible with major radio platforms using detachable cables for each radio. In addition, the Multi-Port Hub offers modular compatibility with vehicular and air based intercoms (ICS).

Situational awareness (talk-through) can be controlled using either the volume controls (+/- 12dB) on the NoizeBarrier™ TAC headset or on the Multi-Port Hub.

In conjunction with the Multi-Port Hub, the NoizeBarrier™H3 and NoizeBarrier™ TAC headsets provide modular control of up to three unique communications platforms, each with a separate Push-To-Talk (PTT) button.

www.ottofedmil.com Toll-free: 1-888-234-6886 Direct: 1-847-428-7171

Designed, manufactured and engineered in the U.S.A for over 50 years.

Detail:Side A

Detail:Side B

Page 2: OTTO Multi-Port Hub

OTTO

Mult

i-Po

rt H

ub

CABLES FOR RADIOS Radio connector cables are available to connect the OTTO Multi-Port Hub to both the NoizeBarrier™ TAC and NoizeBarrier™ H3 headsets.

Available cables include the following:

V3-10904 Next Gen Hand Held Radio cable with EUD connector and jack for remote PTT

V3-10900 PRC-152 legacy cable with jack for remote PTT

V3-10905 Y cable with dual PRC-152 connectors for two legacy radios

V3-10901 HELO to TP-120

V3-10903 AN/VIC-3/4 vehicular intercom

V1-11184 Remote Finger PTT for use with V3-10904 and V3-10900

V3-10906 Headset Y cable with dual Nexus TJ-101 connectors

V3-10909 PRC-152 legacy straight cable with no jack for remote PTT