Other OEM Setup Manuals

Other OEM

Setup Manuals

Bruker MR workstation ParaVision with LASER IMAGERS

Author: [email protected], Edition: May ´05 1

Setup for Bruker MR workstation ParaVision with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (1)............... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Kodak DryView 8100 LASER IMAGER (1).................................................................... 7 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Kodak Digital Science 969 HQ LASER IMAGER (1)................................................. 11 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 13 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................ 14 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Kodak DryView 8200 LASER IMAGER (3,4,5)............................................................... 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (4,5) ............ 22 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 26 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Kodak Digital Science 969 HQ LASER IMAGER (4,5)............................................... 30 n Kodak DryView 8900 LASER IMAGER......................................................................... 32 n Kodak DryView 8150 LASER IMAGER......................................................................... 34 n Kodak Color Medical Imager 1000 ................................................................................. 36

1 setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. 2 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER.



Bruker MR ParaVision workstation via DICOM with Kodak DryView 8300 LASER IMAGER

Requirements: Bruker MR ParaVision platform v2.1 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_DryView_8300 n and set File/Configure Printer: n IP Address=accordingly, Port Number=104, n AE Title=K8300, My AE Title=Bruker (from v3.0) n Film Destination=Processor, Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=LUT=0,10, Smoothing Type=0, n Border Density=Black, Empty Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=8INx10IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 8300 Setup: n on 8300 Operator Menu into Configure User set:

n Density=16, Contrast=10, Sharp/Smooth=1 n on 8300 Service Menu into Configure User set:

n Modality Group=0, Async=Enable

Bruker MRParaVision platform

Kodak DryView 8300

DICOM Network



Bruker MR ParaVision workstation via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)

Requirements: Bruker MR ParaVision platform v2.1 Requirements: 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_9410_DryView_8500 n and set File/Configure Printer: n IP Address=accordingly, Port Number=1024, n AE Title=9410, My AE Title=Bruker (from v3.0) n Film Destination=Processor, Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=LUT= Pmsv3k.w87,9, Smoothing Type=2, n Border Density=Black, Empty Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=11INx14IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 9410 Setup: n on Device Setup, LOCAL PRINTERS:

n Printer=8500, Model=8500, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87

n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8500, AE Title= 9410, Port= 1024, Max Associations= 5

n on Device Setup, SCP PRINTERS, Registered Users:


Kodak DryView 8500 PlusKodak 9410 PACS Link

DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable



n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8500, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=Yes, N-Event Printer=Yes n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60





Min. Requirements: Bruker MR ParaVision platform v2.1 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual camera

by basically using the correspondent Model into 9410 Local Printers Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_9410_DryView_8700 n and set File/Configure Printer: n IP Address=accordingly, Port Number=1024, n AE Title=9410, My AE Title=Bruker (from v3.0) n Film Destination=Processor, Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=LUT= Pmsv3k.w87,9, Smoothing Type=2, n Border Density=Black, Empty Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=14INx17IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 9410 Setup: n on Device Setup, LOCAL PRINTERS:






DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable



n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=Yes, N-Event Printer=Yes n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0





Kodak DryView 8100 LASER IMAGER

Requirements: Bruker MR ParaVision platform v2.1 Requirements: 9410 v1.6, 8100 v2.4.1 Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_9410_DryView_8100 n and set File/Configure Printer: n IP Address=accordingly, Port Number=1024, n AE Title=9410, My AE Title=Bruker (from v3.0) n Film Destination=Processor, Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=LUT= Pmsv3k.w87,9, Smoothing Type=2, n Border Density=Black, Empty Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=14INx17IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low


Kodak DryView 8100Kodak 9410 PACS Link

DICOM Network

COPCIL BoardCopper Cable Control 9-pin

Data 37-pin

RS4229-pole Plug



n Interceptor=Yes, N-Event-Print Job=Yes, N-Event Printer=Yes n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0

n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even





Requirements: Bruker MR ParaVision platform v2.1 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_9410_DryView_8300 n and set File/Configure Printer: n IP Address=accordingly, Port Number=1024, n AE Title=9410, My AE Title=Bruker (from v3.0) n Film Destination=Processor, Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=LUT=u1_109b.w8u,10, Smoothing Type=0, n Border Density=Black, Empty Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=8INx10IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 9410 Setup: n on Device Setup, LOCAL PRINTERS:

n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u


n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low



DICOM Network

Control 9 pin

Data 37 pin

COPCIL board Copper Cable



n Interceptor=Yes, N-Event-Print Job=Yes, N-Event Printer=Yes n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1




Kodak Digital Science 969 HQ LASER IMAGER

Requirements: Bruker MR ParaVision platform v2.1 Requirements: 9410 v1.6, HQ 969 v5.2 Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_9410_HQ_969 n and set File/Configure Printer: n IP Address=accordingly, Port Number=1024, n AE Title=9410, My AE Title=Bruker (from v3.0) n Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=LUT= Pmsv3k.w87,9, Smoothing Type=2, n Border Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=14INx17IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=969, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low


Kodak 9410 PACS Link

DICOM Network

Fiber Cable

Fiber Cable

Kodak M969 HQ

3 M H Q L a s e r I m a g e r



n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

969 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60



Bruker MR ParaVision workstation via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Requirements: Bruker MR ParaVision platform v2.1 Requirements: 190 rel. 1.7.29 Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_MLP_190 n and set File/Configure Printer: n IP Address=accordingly, Port Number=5040, n AE Title=NER_190, My AE Title=Bruker (from v3.0) n Film Destination=Magazine, Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Smoothing Type=NORMAL, n Border Density=Black, Empty Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=14INx17IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45


DICOM Network

Kodak 190 camera



Bruker MR ParaVision workstation via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 160 LASER IMAGER

Requirements: Bruker MR ParaVision platform v2.1 Requirements: MIM200 v6.1, KELI 160 v7.2 Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_MIM200_KELI_160 n and set File/Configure Printer: n IP Address=accordingly, Port Number=5040, n AE Title=NER_160, My AE Title=Bruker (from v3.0) n Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=CS435\CN0, Smoothing Type=NORMAL, n Border Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=14INx17IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 MIM200 Setup: n on Configure, Network:

n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly

n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9

n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On


Kodak MIM 200

DICOM Network

CrossedNetwork Cable

Kodak 160 camera



n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=On (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

160 Setup: no modality-specific setup needed




Kodak Ektascan 2180 LASER PRINTER

Requirements: Bruker MR ParaVision platform v2.1 Requirements: MIM200 v6.1, 2180 rel. 2.17H Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_MIM200_KELP_2180 n and set File/Configure Printer: n IP Address=accordingly, Port Number=5040, n AE Title=NER_2180, My AE Title=Bruker (from v3.0) n Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=CS435\CN0, Smoothing Type=NORMAL, n Border Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=14INx17IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On


Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 2180 camera



n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=On (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off

2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed





Requirements: Bruker MR ParaVision platform v2.1 Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_MIM200_KELP_1120 n and set File/Configure Printer: n IP Address=accordingly, Port Number=5040, n AE Title=NER_1120, My AE Title=Bruker (from v3.0) n Film Destination=Processor, Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=CS435\CN0, Smoothing Type=NORMAL, n Border Density=Black, Empty Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=14INx17IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On


Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 1120 camera



n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=On (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off






Requirements: Bruker MR ParaVision platform v2.1 Requirements: MIM 200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_MIM200_DryView_8200 n and set File/Configure Printer: n IP Address=accordingly, Port Number=5040, n AE Title=NER_8200, My AE Title=Bruker (from v3.0) n Film Destination=Processor, Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=LUT= Pmsv3k.w87,9, Smoothing Type=2, n Border Density=Black, Empty Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=14INx17IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 MIM200 Setup: n on Configure, Network:

n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly


n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On


Kodak MIM 200

DICOM Network


Kodak DryView 8200



n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=On (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025





Requirements: Bruker MR ParaVision platform v2.1 Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into MIM200 Destination Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_MIM200_DryView_8500 n and set File/Configure Printer: n IP Address=accordingly, Port Number=5040, n AE Title=NER_8500, My AE Title=Bruker (from v3.0) n Film Destination=Processor, Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=LUT= Pmsv3k.w87,9, Smoothing Type=2, n Border Density=Black, Empty Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=11INx14IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set: n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None


Kodak DryView 8500 PlusKodak MIM 200

DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable



n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports= On (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=11INx14IN (Always=N), Negotiate Color Print=Off 8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60





Requirements: Bruker MR ParaVision platform v2.1 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual camera

by basically using the correspondent Model into MIM200 Destination Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_MIM200_DryView_8700 n and set File/Configure Printer: n IP Address=accordingly, Port Number=5040, n AE Title=NER_8700, My AE Title=Bruker (from v3.0) n Film Destination=Processor, Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=LUT= Pmsv3k.w87,9, Smoothing Type=2, n Border Density=Black, Empty Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=14INx17IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 MIM200 Setup: n on Configure, Network:


n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:

n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None



DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable



n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=On (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60





Requirements: Bruker MR ParaVision platform v2.1 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_MIM200_DryView_8100 n and set File/Configure Printer: n IP Address=accordingly, Port Number=5040, n AE Title=NER_8100, My AE Title=Bruker (from v3.0) n Film Destination=Processor, Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=LUT= Pmsv3k.w87,9, Smoothing Type=2, n Border Density=Black, Empty Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=14INx17IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On


Kodak DryView 8100Kodak MIM 200

DICOM Network


Data 37-pin

RS4229-pole Plug




n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=On (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0






Requirements: Bruker MR ParaVision platform v2.1 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_MIM200_DryView_8300 n and set File/Configure Printer: n IP Address=accordingly, Port Number=5040, n AE Title=NER_8300, My AE Title=Bruker (from v3.0) n Film Destination=Processor, Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=LUT=u1_109b.w8u,10, Smoothing Type=2, n Border Density=Black, Empty Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=8INx10IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 MIM200 Setup: n on Configure, Network:


n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On



DICOM Network

Control 9 pin

Data 37 pin




n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify:

n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports= On (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Film Output Dest=Bin 9 (Always=N)






Requirements: Bruker MR ParaVision platform v2.1 Requirements: MIM200 v6.1, HQ 969 v5.2 Note: This setup is basically also valid for 25 PS computer Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_MIM200_HQ_969 n and set File/Configure Printer: n IP Address=accordingly, Port Number=5040, n AE Title=NER_969, My AE Title=Bruker (from v3.0) n Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=LUT= Pmsv3k.w87,9, Smoothing Type=2, n Border Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=14INx17IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 969, Set: n General: Log.Name=969 n General: Database Name=969, Model=969, Memory=32 n Media Info: Media=35x43cm, 4096x5002, 4912, Blue n Media Info: Media= 11x14in, 3030x4096, 4006, Blue n Media Info: Media= 8x10in, 2086x2929, 2839, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60


DICOM Network

Fiber Cable

Fiber Cable

Kodak M969 HQ


Kodak MIM 200



n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.3457 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports= On (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 969 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60




Requirements: Bruker MR ParaVision platform v2.1 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=eg Kodak_MIM200_DryView_8200 n and set File/Configure Printer: n IP Address=accordingly, Port Number=5040, n AE Title=NER_8900, My AE Title=Bruker (from v3.0) n Film Destination=Processor, Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=LUT= Pmsv3k.w87,9, Smoothing Type=2, n Border Density=Black, Empty Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=14INx17IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 8900 Setup: n on Configuration, System, Network:

n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly

n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM

n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On


DICOM Network

Kodak DryView 8900



n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Pmsv3k.w87 (Always=N), Contrast=9 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=mr




Requirements: Bruker MR ParaVision platform v2.1 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=eg Kodak_MIM200_DryView_8200 n and set File/Configure Printer: n IP Address=accordingly, Port Number=5040, n AE Title=DV8150, My AE Title=Bruker (from v3.0) n Film Destination=Processor, Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=LUT= Pmsb.w87,9, Smoothing Type=2, n Border Density=Black, Empty Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=14INx17IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 8150 Setup: n on Configuration, System, Network:

n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly


n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On,


DICOM Network

Kodak DryView 8150



n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Pmsb.w87 (Always=Y) n Contrast=9 (Always=N), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=mr



Bruker MR ParaVision workstation via DICOM with Kodak Color Medical Imager 1000

Requirements: Bruker MR ParaVision platform v2.1 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Bruker (ParaVision v2.1) Setup: n Into Camera Tool click on the window n Set Choose Printer=Kodak_MIM200_DryView_8300 n and set File/Configure Printer: n IP Address=accordingly, Port Number=5040, n AE Title=CMI1000, My AE Title=Bruker (from v3.0) n Film Destination=Processor, Medium type=Blue Film, Magnif.Type=Cubic n Camera Image Scaling=1 (ie not scaled), Max Density=300 n Config.Info=LUT=0,9, Smoothing Type=2, n Border Density=Black, Empty Density=Black, Trim=Off n Choose Layout ie format=4:1, Orientation=Portrait, Filmsize=8INx10IN n and set File/Setup Film : Priority=Low, Polarity=Normal, Copies=1 CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup:

n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040

n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)

n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm

n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality:

n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N)


DICOM Network

Kodak CMI 1000



n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (Always=Y), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No

n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No

n Save Changes and Exit

Delft workstation Digidelca / Thorascan with LASER IMAGER Products


Setup for Delft workstation Digidelca / Thorascan with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)...... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual).................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8100 LASER IMAGER......................................................................... 8 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (1) ............................................................................................................ 12

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER .......................................................................... 14

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER ....................................................................... 16


n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (1).................................................................... 20

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (1) . 22

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (1)............... 24



n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (1) ............................................................................................................ 30

n Kodak DryView 8900 LASER IMAGER......................................................................... 32 n Kodak DryView 8150 LASER IMAGER......................................................................... 34 n Kodak Color Medical Imager 1000 ................................................................................. 36

1 setup valid also for Kodak PACS LINK 25 PRINT SERVER.



Digidelca / Thorascan via DICOM with Kodak DryView 8300 LASER IMAGER

Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Delft Setup: n Inside DV8300.tcl file set parameters: n Set theirAE 8300 n Set theirAddress “accordingly:104” n Set filmsize 8INX10IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 0 n Set config “LUT=0,10” n Inside Print.bat file set following: hpclient.exe DV8300.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is

the recommended default setting) and copy this file into Delft under hpw directory and rename this file as LUT.txt

n To print True Size: a) printer matrix and spot must be defined under Windows with regedit into

HKEY_LOCAL_MACHINE\SOFTWARE\ROGAN\ROGPRINT\Device0: height=2676, ident=8x10, name=Kodak 8300 8x10, path=D:\spool_P pixelsize_in_unit=0.085, type=dicomprint, unit=mm, width=2256

b) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 8300 8x10, Print Mode=True Size, Orient.=eg Portrait

8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=10, Sharp/Smooth=0 ie Auto n on 8300 Service Menu into Configure User set:

n Modality Group=0

Kodak DryView 8300

DICOM Network

Delft Imaging Systems- Digidelca- Thorascan



Digidelca / Thorascan via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: 190 rel. 1.7.29 Delft Setup: n Inside K190.tcl file set parameters: n Set theirAE 190 n Set theirAddress “accordingly:5040” n Set filmsize 14INX17IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 2 n Set config “CS435\CN0\PD1.2” n Inside Print.bat file set following: hpclient.exe K190.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: c) printer matrix and spot must be defined under Windows with regedit into


d) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 190 14x17, Print Mode=True Size, Orient.=eg Portrait

190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

DICOM Network

Kodak 190 cameraDelft Imaging Systems- Digidelca- Thorascan



Digidelca / Thorascan via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)

Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers Delft Setup: n Inside DV8700.tcl file set parameters: n Set theirAE 9410 n Set theirAddress “accordingly:1024” n Set filmsize 14INX17IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 2 n Set config “LUT=0,0” n Inside Print.bat file set following: hpclient.exe DV8700.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: e) printer matrix and spot must be defined under Windows with regedit into


f) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 8700 14x17, Print Mode=True Size, Orient.=eg Portrait

9410 Setup:

Kodak DryView 8700 Plus


DICOM Network

3M8700 DryViewFiber Cable

Fiber Cable




n on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87

n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title= 9410, Port= 1024, Max Associations= 5 n on Device Setup, SCP PRINTERS, Registered Users:

n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60





Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers Delft Setup: n Inside DV8500.tcl file set parameters: n Set theirAE 9410 n Set theirAddress “accordingly:1024” n Set filmsize 11INX14IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 2 n Set config “LUT=0,0” n Inside Print.bat file set following: hpclient.exe DV8500.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: g) printer matrix and spot must be defined under Windows with regedit into


h) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 8500 11x14, Print Mode=True Size, Orient.=eg Portrait



DICOM Network


Fiber Cable




9410 Setup: n on Device Setup, LOCAL PRINTERS:









Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: 9410 v1.6, 8100 v2.4.1 Delft Setup: n Inside DV8100.tcl file set parameters: n Set theirAE 9410 n Set theirAddress “accordingly:1024” n Set filmsize 14INX17IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 2 n Set config “LUT=0,0” n Inside Print.bat file set following: hpclient.exe DV8100.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: i) printer matrix and spot must be defined under Windows with regedit into


j) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 8100 14x17, Print Mode=True Size, Orient.=eg Portrait

9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz


DICOM Network


Data 37-pin

RS4229-pole Plug




n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0






Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Delft Setup: n Inside DV94108300.tcl file set parameters: n Set theirAE 9410 n Set theirAddress “accordingly:1024” n Set filmsize 8INX10IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 0 n Set config “LUT=0,0” n Inside Print.bat file set following: hpclient.exe DV94108300.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: k) printer matrix and spot must be defined under Windows with regedit into


l) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 8300 8x10, Print Mode=True Size, Orient.=eg Portrait


n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even


DICOM Network

Control 9 pin

Data 37 pin





n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u


n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No, Print Always=Yes n Contrast Test Mode=No, Contrast Test Mode Density=0





Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600)

Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Delft Setup: n Inside DV8610.tcl file set parameters: n Set theirAE 9410 n Set theirAddress “accordingly:1024” n Set filmsize 8INX10IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 1 n Set config “LUT=0,0” n Inside Print.bat file set following: hpclient.exe DV8610.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: m) printer matrix and spot must be defined under Windows with regedit into


n) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 8610 8x10, Print Mode=True Size, Orient.=eg Portrait


Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin





n Printer=8610, Model=8600/8610, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=12 (8 if 8600), Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT= don’t care n Max.Density=300, Contrast=5, Border Density=0

n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8610, AE Title=9410, Port= 1024, Max Associations= 5 n on Device Setup, SCP PRINTERS, Registered Users:

n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=5, Max.Density=300 n Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Gamma=Linear in Transmittance, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=11, Contrast=5, Sharp/Smooth=1, Film Layout: 1:1P n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set:

n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=127 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1



Digidelca / Thorascan via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: MIM 200 v6.1, KELI 160 v5.2 Delft Setup: n Inside K160.tcl file set parameters: n Set theirAE 160 n Set theirAddress “accordingly:5040” n Set filmsize 14INX17IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 2 n Set config “CS435\CN0” n Inside Print.bat file set following: hpclient.exe K160.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: o) printer matrix and spot must be defined under Windows with regedit into


p) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 160 14x17, Print Mode=True Size, Orient.=eg Portrait

MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly

Kodak MIM 200

DICOM Network






n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Interpolation=Cubic, Image Polarity=Normal (Always=N) n Modality=OT (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None (Always=N) n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: MIM 200 v6.1, 2180 rel. 2.17H Note: in case another filmsize eg 11x14 is needed, another eg camera_1114.tcl file must be generated with the parameter set to the correspondent 11x14 filmsize, and a second printer eg camera_1114 with same IP address must be installed on Delft Delft Setup: n Inside K2180.tcl file set parameters: n Set theirAE 2180 n Set theirAddress “accordingly:5040” n Set filmsize 14INX17IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 2 n Set config “CS435\CN0” n Inside Print.bat file set following: hpclient.exe K2180.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: q) printer matrix and spot must be defined under Windows with regedit into


r) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 2180 14x17, Print Mode=True Size, Orient.=eg Portrait

MIM200 Setup:

Kodak MIM 200

DICOM Network

Fiber Cable




n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:

n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:

n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Modality=OT (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=Black (Always=N) n Interpolation=Cubic, Border Dmax=3.99 n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off






Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: MIM 200 v6.1, 1120 rel. 2.40/032 Note: in case another filmsize eg 11x14 is needed, another eg camera_1114.tcl file must be generated with the parameter set to the correspondent 11x14 filmsize, and a second printer eg camera_1114 with same IP address must be installed on Delft Delft Setup: n Inside K1120.tcl file set parameters: n Set theirAE 1120 n Set theirAddress “accordingly:5040” n Set filmsize 14INX17IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 2 n Set config “CS435\CN0” n Inside Print.bat file set following: hpclient.exe K1120.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: s) printer matrix and spot must be defined under Windows with regedit into


t) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 1120 14x17, Print Mode=True Size, Orient.=eg Portrait

MIM200 Setup:

Kodak MIM 200

DICOM Network

Fiber Cable




n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7







Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: MIM 200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: in case another filmsize eg 11x14 is needed, another eg camera_1114.tcl file must be generated with the parameter set to the correspondent 11x14 filmsize, and a second printer eg camera_1114 with same IP address must be installed on Delft Delft Setup: n Inside DV8200.tcl file set parameters: n Set theirAE 8200 n Set theirAddress “accordingly:5040” n Set filmsize 14INX17IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 2 n Set config “LUT=0,0” n Inside Print.bat file set following: hpclient.exe DV8200.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: u) printer matrix and spot must be defined under Windows with regedit into


v) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 8200 14x17, Print Mode=True Size, Orient.=eg Portrait

Kodak MIM 200

DICOM Network


Kodak DryView 8200




MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:

n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:

n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Blue n Media Info: Media=35x35cm, 4361x4247, 4157, Blue n Media Info: Media=11x14in, 3272x4361, 4271, Blue n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On n Formatting: Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20 n Formatting: Max Img Col=0, Max Img Row=0, n Formatting: Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.1 n SCU: Density Space= On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n at Keypad connected to MIM, press Menu, Service Menu, SCP Services: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Ver693c0.w87 (Always=Y), Contrast (dry)=6 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off

8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87



n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smooth=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025





Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination Delft Setup: n Inside DV8700.tcl file set parameters: n Set theirAE 8700 n Set theirAddress “accordingly:5040” n Set filmsize 14INX17IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 2 n Set config “LUT=0,0” n Inside Print.bat file set following: hpclient.exe DV8700.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: w) printer matrix and spot must be defined under Windows with regedit into


x) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 8700 14x17, Print Mode=True Size, Orient.=eg Portrait

MIM200 Setup:

Kodak DryView 8700 PlusDICOM Network


Fiber Cable

Kodak MIM 200




n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly


n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Disable Even, Timeout=60





Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into MIM200 Destination Delft Setup: n Inside DV8500.tcl file set parameters: n Set theirAE 8500 n Set theirAddress “accordingly:5040” n Set filmsize 11INX14IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 2 n Set config “LUT=0,0” n Inside Print.bat file set following: hpclient.exe DV8500.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: y) printer matrix and spot must be defined under Windows with regedit into


z) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 8500 11x14, Print Mode=True Size, Orient.=eg Portrait

MIM200 Setup:



Fiber Cable

Kodak MIM 200




n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set: n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=11INx14IN (Always=N) n Negotiate Color Print=Off 8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Disable Even, Timeout=60





Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Delft Setup: n Inside DV8100.tcl file set parameters: n Set theirAE 8100 n Set theirAddress “accordingly:5040” n Set filmsize 14INX17IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 2 n Set config “LUT=0,0” n Inside Print.bat file set following: hpclient.exe DV8100.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: aa) printer matrix and spot must be defined under Windows with regedit into


bb) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 8100 14x17, Print Mode=True Size, Orient.=eg Portrait

MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly

Kodak DryView 8100

DICOM Network


Data 37-pin

RS4229-pole Plug

Kodak MIM 200





n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off







Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Delft Setup: n Inside DV94108300.tcl file set parameters: n Set theirAE 8300 n Set theirAddress “accordingly:5040” n Set filmsize 8INX10IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 0 n Set config “LUT=0,0” n Inside Print.bat file set following: hpclient.exe DV94108300.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: cc) printer matrix and spot must be defined under Windows with regedit into


dd) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 8300 8x10, Print Mode=True Size, Orient.=eg Portrait

MIM200 Setup: n on Configure, Network:


Kodak DryView 8300

DICOM Network

Control 9 pin

Data 37 pin


Kodak MIM 200





n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=0 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off




Digidelca / Thorascan via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Delft Setup: n Inside DV8610.tcl file set parameters: n Set theirAE 8610 n Set theirAddress “accordingly:5040” n Set filmsize 8INX10IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 1 n Set config “LUT=0,0” n Inside Print.bat file set following: hpclient.exe DV8610.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: ee) printer matrix and spot must be defined under Windows with regedit into


ff) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 8610 8x10, Print Mode=True Size, Orient.=eg Portrait

MIM200 Setup:

Kodak DryView 8610

DICOM Network

Control 9 pin

Data 37 pin


Kodak MIM 200




n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=upmsv3kp.w8u (Always=N), Contrast (dry)=5 (Always=N) n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=mr n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set:





Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: in case another filmsize eg 11x14 is needed, another eg camera_1114.tcl file must be generated with the parameter set to the correspondent 11x14 filmsize, and a second printer eg camera_1114 with same IP address must be installed on Delft Delft Setup: n Inside eg DV8200.tcl file set parameters: n Set theirAE 8900 n Set theirAddress “accordingly:5040” n Set filmsize 14INX17IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 2 n Set config “LUT=0,0” n Inside Print.bat file set following: hpclient.exe DV8200.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: gg) printer matrix and spot must be defined under Windows with regedit into


hh) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 8900 14x17, Print Mode=True Size, Orient.=eg Portrait

8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly

DICOM Network

Kodak DryView 8900




n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:

n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:

n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any

n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Pmsv3k.w87 (Always=N), Contrast=9 (Always=N) n Smoothing Type=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws




Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: in case another filmsize eg 11x14 is needed, another eg camera_1114.tcl file must be generated with the parameter set to the correspondent 11x14 filmsize, and a second printer eg camera_1114 with same IP address must be installed on Delft Delft Setup: n Inside eg DV8200.tcl file set parameters: n Set theirAE DV8150 n Set theirAddress “accordingly:5040” n Set filmsize 14INX17IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 2 n Set config “LUT=0,0” n Inside Print.bat file set following: hpclient.exe DV8200.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: ii) printer matrix and spot must be defined under Windows with regedit into


jj) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak 8150 14x17, Print Mode=True Size, Orient.=eg Portrait

8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly

DICOM Network

Kodak DryView 8150




n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:


n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Pmsb.w87 (Always=Y) n Contrast=9 (Always=N), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws



Digidelca / Thorascan via DICOM with Kodak Color Medical Imager 1000

Requirements: HyperPACS platform, OWS v1.2, HyperVIEW v4.1, hpClient v1.05 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Delft Setup: n Inside DV94108300.tcl file set parameters: n Set theirAE CMI1000 n Set theirAddress “accordingly:5040” n Set filmsize 8INX10IN n Set magnification CUBIC n Set border BLACK n Set emptyImage BLACK n Set trim NO n Set maxDensity 260 n Set smoothing 0 n Set config “LUT=0,0” n Inside Print.bat file set following: hpclient.exe DV94108300.tcl n For the image quality select on Delft Service CD the file LUT_KODAK_20.txt (which is


n To print True Size: kk) printer matrix and spot must be defined under Windows with regedit into

HKEY_LOCAL_MACHINE\SOFTWARE\ROGAN\ROGPRINT\Device0: height=if A4 then 3134 (or if 8.5inx11in then 2954), ident=8x10, name=Kodak CMI1000 8x10, path=D:\spool_P pixelsize_in_unit=0.081, type=dicomprint, unit=mm, width=2508

ll) into Delft application select the Tool icon ie Printer Settings and set: Select Printer=Kodak CMI1000 8x10, Print Mode=True Size, Orient.=eg Portrait

CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly

DICOM Network


Kodak CMI 1000



n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)



n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (Always=Y), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No



Digithurst Print Server with some LASER IMAGER Products

Author: [email protected], Edition: November ́ 04 1

Setup for Digithurst Print Server with LASER IMAGERS

Note: Digithurst Print Server translates Postscript protocol coming from Siemens MagicView or Siemens Opdima (in this case TFT=PMS, C=9) into 952 protocol for cameras

Connection POINT-TO-POINT: n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8700 LASER IMAGER / Dual Printer ..................................................... 2 n Kodak DryView 8700 LASER IMAGER / Plus ................................................................. 3 n Kodak DryView 8700 LASER IMAGER / Standard ......................................................... 4 n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8500 LASER IMAGER / Dual Printer ..................................................... 5 n Kodak DryView 8500 LASER IMAGER / Plus ................................................................. 6 n Kodak DryView 8500 LASER IMAGER / Standard ......................................................... 7 n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8300 LASER IMAGER / Dual Printer ..................................................... 8 n Kodak DryView 8300 LASER IMAGER / Standalone ...................................................... 9 n Kodak Digital Science 969 HQ LASER IMAGER ....................................................... 10 n Kodak Digital Science 969 HQT LASER IMAGER..................................................... 11 n Kodak Digital Science 959 XL LASER IMAGER ........................................................ 12 n Kodak DryView 8100 LASER IMAGER.......................................................................... 13



Digithurst Print Server with Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8700 LASER IMAGER / Dual

RS232 25-to-9 pin Host Adaptor Cable Siemens MagicView

8700 Dual

37-pin Digital Cable

Digithurst Print Server

Local Network

3 M 8 7 0 0 D r y V i e w

UKEIB

DEIB

Fiber Cable

Fiber Cable

Fiber Cable

8800 MIM

Requirements: Siemens MagicView rel. VA31B, 8800 rel. 4.2, 8700 rel. 1.34 MagicView Setup: declare ima1-ps as network printer Digithurst Setup: - plug network cable into LAN1 card (look carefully for LAN1 plug) - using Sirius password, setup IPaddr. for 3Com 3C905B-TX, i.e., LAN1 - using Digithurst password, into Toolbox select proper camera, e.g., 8700 8800/8700 Dual Setup: n on UKEIB:

n Jumpers=OFF/ON/OFF/OFF/ON/OFF, Switch=Center n on COMM Menu:

n 959 Default n on IMAGE Menu:

n TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu:

n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n on EIB Menu:

n Parity=Disable, Timeout=60



Digithurst Print Server with Kodak DryView 8700 LASER IMAGER / Plus

RS232 25-to-9 pinHost Adaptor Cable

Siemens MagicView

8700 Plus


DigithurstPrint Serever

Local Network

3M8700 DryViewDEIB

UKEIB

Fiber Cable

Fiber Cable

Requirements: Siemens MagicView rel. VA31B, 8700 rel. 1.34 MagicView Setup: declare ima1-ps as network printer Digithurst Setup: - plug network cable into LAN1 card (look carefully for LAN1 plug) - using Sirius password, setup IPaddr. for 3Com 3C905B-TX, i.e., LAN1 - using Digithurst password, into Toolbox select proper camera, e.g., 8700 8700 Plus Setup: n on UKEIB:




n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n on SYSTEM Menu:

n Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=60





Digithurst Print Server with Kodak DryView 8700 LASER IMAGER / Standard

RS232 25-to-9 pinHost Adaptor CableSiemens MagicView

8700 Standard


DigithurstPrint Server

Local Network

3M 8700DryView

Requirements: Siemens MagicView rel. VA31B, 8700 rel. 1.34 MagicView Setup: declare ima1-ps as network printer Digithurst Setup: - plug network cable into LAN1 card (look carefully for LAN1 plug) - using Sirius password, setup IPaddr. for 3Com 3C905B-TX, i.e., LAN1 - using Digithurst password, into Toolbox select proper camera, e.g., 8700 8700 Standard Setup: n on TDB/C board:

n Jumpers=RS232, Switch=Center n on COMM Menu:












8500 Dual



Local Network

3M8700DryView

UKEIB

DEIB

Fiber Cable

Fiber Cable

Fiber Cable

8800 MIM

3M 8800Mul ti- Input Manager

Requirements: Siemens MagicView rel. VA31B, 8800 rel. 5.1, 8500 rel. 1.34 MagicView Setup: declare ima1-ps as network printer Digithurst Setup: - plug network cable into LAN1 card (look carefully for LAN1 plug) - using Sirius password, setup IPaddr. for 3Com 3C905B-TX, i.e., LAN1 - using Digithurst password, into Toolbox select proper camera, e.g., 8500 8800/8500 Dual Setup: n on UKEIB:










Digithurst Print Server with Kodak DryView 8500 LASER IMAGER / Plus


Siemens MagicView

8500 Plus



Local Network

3M8700 DryViewDEIB

UKEIB

Fiber Cable

Fiber Cable

Requirements: Siemens MagicView rel. VA31B, 8500 rel. 1.34 MagicView Setup: declare ima1-ps as network printer Digithurst Setup: - plug network cable into LAN1 card (look carefully for LAN1 plug) - using Sirius password, setup IPaddr. for 3Com 3C905B-TX, i.e., LAN1 - using Digithurst password, into Toolbox select proper camera, e.g., 8500 8500 Plus Setup: n on UKEIB:










Digithurst Print Server with Kodak DryView 8500 LASER IMAGER / Standard


8500 Standard



Local Network

3M 8700DryView

Requirements: Siemens MagicView rel. VA31B, 8500 rel. 1.34 MagicView Setup: declare ima1-ps as network printer Digithurst Setup: - plug network cable into LAN1 card (look carefully for LAN1 plug) - using Sirius password, setup IPaddr. for 3Com 3C905B-TX, i.e., LAN1 - using Digithurst password, into Toolbox select proper camera, e.g., 8500 8500 Standard Setup: n on TDB/C board:





n Memory Management=Best Fit n on EIB Menu:






RS232 25-to-9 pin Host Adaptor Cable Siemens MagicView

8300 Dual


Digithurst Print Server

Local Network

UKEIB

DEIB Fiber Cable

Fiber Cable

Fiber Cable

8800 MIM

POEIB 37- pin Digital Cable

9-to-9-pin Copper Cable

Requirements: Siemens MagicView rel. VA31B, 8800 rel. 5.1, 8300 rel. 4.4

MagicView Setup: declare ima1-ps as network printer

Digithurst Setup: - plug network cable into LAN1 card (look carefully for LAN1 plug) - using Sirius password, setup IPaddr. for 3Com 3C905B-TX, i.e., LAN1 - using Digithurst password, into Toolbox select proper camera, e.g., 8300

8300 Setup: n on 8300 Operator Menu set:

n Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set:

n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Protocol=3M

n Digital Interface: Parity=None n Modality Group=4

8800 Setup: n on UKEIB:



n Contrast=1, Density=16 n on HOST Menu:







Digithurst Print Server with Kodak DryView 8300 LASER IMAGER / Standalone


8300 Standalone



Local Network

Requirements: Siemens MagicView rel. VA31B, 8300 rel. 4.4 MagicView Setup: declare ima1-ps as network printer Digithurst Setup: - plug network cable into LAN1 card (look carefully for LAN1 plug) - using Sirius password, setup IPaddr. for 3Com 3C905B-TX, i.e., LAN1 - using Digithurst password, into Toolbox select proper camera, e.g., 8300 8300 Setup: n on 8300 Operator Menu set:

n Density=16 n Contrast=1 n Film Layout: Format=1on 1, Mode=Portrait

n on 8300 Service Menu set: n Serial Control Interface: Baud Rate=9600, Nbr. of Data bits=8,

Nbr. of Stop bits=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None n Modality Group=4



Digithurst Print Server with Kodak Digital Science 969 HQ LASER IMAGER




Local Network

UKEIB

DEIB

Fiber Cable

Fiber Cable

M969 HQ

3 M H Q L a s e r I m a g er

Requirements: Siemens MagicView rel. VA31B, M969 HQ rel. 5.2

MagicView Setup: declare ima1-ps as network printer

Digithurst Setup: - plug network cable into LAN1 card (look carefully for LAN1 plug) - using Sirius password, setup IPaddr. for 3Com 3C905B-TX, i.e., LAN1 - using Digithurst password, into Toolbox select proper camera, e.g., 969

Important Note:

Only 1 film size can be used. It should be configured at Digithurst Print Sooler. Also at 969 HQ Local Keypad select same Media Size and push SET button.

If customer wants to work with another film size, this should be reconfigured at Digihurst Print Spooler and at 969 Local Keypad.

M969 HQ Setup: n on UKEIB:

n Jumpers=OFF/ON/OFF/OFF/ON/OFF, Switch=Center n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correct=Yes, Scale Format=Yes, Scale Magnif=Yes n on EIB Menu: Parity=Disable, Timeout=60



Digithurst Print Server with Kodak Digital Science 969 HQT LASER IMAGER


M969 HQT



Local Network


Requirements: Siemens MagicView rel. VA31B, HQT rel. 1.00 Note: in case of image quality problems update HQT to rel. 2.0 MagicView Setup: declare ima1-ps as network printer Digithurst Setup: - plug network cable into LAN1 card (look carefully for LAN1 plug) - using Sirius password, setup IPaddr. for 3Com 3C905B-TX, i.e., LAN1 - using Digithurst password, into Toolbox select proper camera, e.g., 969 M969 HQT Setup: n on TDB/C board:


n 959 Default n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry)

n TFT=TLII, Contrast=5, Density=7, on OIC Menu: Chemistry=1 n on SYSTEM Menu:





Digithurst Print Server with Kodak Digital Science 959 XL LASER IMAGER




Local Network

UKEIB

DEIB

Fiber Cable

Fiber Cable

M959 XL

3 M La s er Im a g er

Requirements: Siemens MagicView rel. VA31B, M959 XL rel. 3.8 MagicView Setup: declare ima1-ps as network printer Digithurst Setup: - plug network cable into LAN1 card (look carefully for LAN1 plug) - using Sirius password, setup IPaddr. for 3Com 3C905B-TX, i.e., LAN1 - using Digithurst password, into Toolbox select proper camera, e.g., 959 M959 XL Setup: n on UKEIB:



n Contrast & Density settings depending on chemistry n LUT on Input Module=TLII_959 (p/n 78.8079.9817.0)

n on EIB Menu: n Parity=Disable, Timeout=60



Digithurst Print Server with Kodak DryView 8100 LASER IMAGER

Requirements: Siemens MagicView rel. VA31B, 8100 rel. 2.4.1 MagicView Setup: declare ima1-ps as network printer Digithurst Setup: - plug network cable into LAN1 card (look carefully for LAN1 plug) - using Sirius password, setup IPaddr. for 3Com 3C905B-TX, i.e., LAN1 - using Digithurst password, into Toolbox select proper camera, e.g., 8700 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs):

n SW1=Down n on COMMUNICATIONS Menu:

n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0

n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu:

n TFT=WRKSTN2A n on LOCAL PANEL Menu:

n Contrast=2, Density=3.00 n on SYSTEM Menu:

n Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu:

n Pixel Depth=8, Header/Line, Parity=Disable


DryView 8100



Local Network

RS232 9-poleplug

Dornier workstation for Opus / Doli with LASER IMAGERS


Setup for Dornier workstation Opus / Doli with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /






n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak Digital Science 969 HQ LASER IMAGER (1)................................................. 14

n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /







Kodak DryView 8100 LASER IMAGER (4,5) ................................................................. 36 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (4,5) .......................................................................................................... 42

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Digital Science 969 HQ LASER IMAGER (4)................................................. 45





Dornier workstation via DICOM with Kodak DryView 8300 LASER IMAGER

Requirements: Dornier workstation v1.0 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak DryView 8300 n Description=DV8300, AETitle=K8300, IPAddress=accordingly, Port=104, Timeout=50

msec n Grayscale Print: Copies=1, Bits=8, Destination=Processor, Config.Info=LUT=0,10,

Border=Black, Empty Image=Black, Polarity=Normal, Magnification=Cubic, Smoothing=0, Trim=No

n Media: Film=8INX10IN, Blue Film: Enable=On, Dmax=300, Dmin=leave blank n Formats: 1x1 Rows=leave blank, Columns=leave blank n Orientation: Landscape=On, Portrait=On n 1x2, 2x2 8300 Setup: n on 8300 Operator Menu into Configure User set:


n Modality Group=0

Dornier Workstation

Kodak DryView 8300

DICOM Network



Dornier workstation via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: Dornier workstation v1.0 Requirements: 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak 9410 DryView 8500 n Description=DV8500, AETitle=9410, IPAddress=accordingly, Port=1024, Timeout=50

msec n Grayscale Print: Copies=1, Bits=12, Destination=Processor,

Config.Info=LUT=Pmsv3k.w87,9, Border=Black, Empty Image=Black, Polarity=Normal, Magnification=Cubic, Smoothing=2, Trim=No

n Media: Film=11INX14IN, Blue Film: Enable=On, Dmax=300, Dmin=leave blank n Formats: 1x1 Rows=leave blank, Columns=leave blank n Orientation: Landscape=On, Portrait=On n 1x2, 2x2, 2x3, 3x4 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly

Dornier Workstation


DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable



n SCP=8500, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0






Requirements: Dornier workstation v1.0 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual camera

by basically using the correspondent Model into 9410 Local Printers Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak 9410 DryView 8700 n Description=DV8700, AETitle=9410, IPAddress=accordingly, Port=1024, Timeout=50



n Media: Film=14INX17IN, Blue Film: Enable=On, Dmax=300, Dmin=leave blank n Formats: 1x1 Rows=leave blank, Columns=leave blank n Orientation : Landscape=On, Portrait=On n 1x2, 2x2, 2x3, 3x4 9410 Setup: n on Device Setup, LOCAL PRINTERS:




Dornier Workstation


DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable



n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0






Requirements: Dornier workstation v1.0 Requirements: 9410 v1.6, 8100 v2.4.1 Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak 9410 DryView 8100 n Description=DV8100, AETitle=9410, IPAddress=accordingly, Port=1024, Timeout=50



n Media: Film=14INX17IN, Blue Film: Enable=On, Dmax=300, Dmin=leave blank n Formats: 1x1 Rows=leave blank, Columns=leave blank n Orientation: Landscape=On, Portrait=On n 1x2, 2x2, 2x3, 3x4 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low

Dornier Workstation


DICOM Network


Data 37-pin

RS4229-pole Plug



n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0






Requirements: Dornier workstation v1.0 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak 9410 DryView 8300 n Description=DV8300, AETitle=9410, IPAddress=accordingly, Port=1024, Timeout=50


Config.Info=LUT=u1_109b.w8u,10, Border=Black, Empty Image=Black, Polarity=Normal, Magnification=Cubic, Smoothing=0, Trim=No

n Media: Film=8INX10IN, Blue Film: Enable=On, Dmax=300, Dmin=leave blank n Formats: 1x1 Rows=leave blank, Columns=leave blank n Orientation: Landscape=On, Portrait=On n 1x2, 2x2 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low

Dornier Workstation


DICOM Network

Control 9 pin

Data 37 pin










Requirements: Dornier workstation v1.0 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak 9410 DryView 8610 n Description=DV8610, AETitle=9410, IPAddress=accordingly, Port=1024, Timeout=50

msec n Grayscale Print: Copies=1, Bits=12, Destination=Processor, Border=Black, Empty

Image=Black, Polarity=Normal, Magnification=Cubic, Smoothing=0, Trim=No n Media: Film=8INX10IN, Blue Film: Enable=On, Dmax=300, Dmin=leave blank n Formats: 1x1 Rows=leave blank, Columns=leave blank n Orientation: Landscape=On, Portrait=On n 1x2, 2x2 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=5, Max.Density=300

Dornier Workstation


DICOM Network

Control 9 pin

Data 37 pin




n Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Gamma Table=Linear in Transmittance, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:

n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, VRTX32=1.08, Contrast=6.G.7, Conv.Kernel=1.0.5)

n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P, 2:1P, 4:1P, 6:1P n Gamma Table=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care

n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=127 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1





Requirements: Dornier workstation v1.0 Requirements: 9410 v1.6, HQ 969 v5.2 Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak 9410 HQ 969 n Description=HQ969, AETitle=9410, IPAddress=accordingly, Port=1024,

Timeout=50 msec n Grayscale Print: Copies=1, Bits=12, Destination=Processor,


n Media: Film=14INX17IN, Blue Film: Enable=On, Dmax=300, Dmin=leave blank n Formats: 1x1 Rows=leave blank, Columns=leave blank n Orientation: Landscape=On, Portrait=On n 1x2, 2x2, 2x3, 3x4 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=969, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low

Dornier Workstation


DICOM Network

Fiber Cable

Fiber Cable

Kodak M969 HQ








Dornier workstation via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Requirements: Dornier workstation v1.0 Requirements: 190 rel. 1.7.29 Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak MLP 190 n Description=190, AETitle=K190, IPAddress=accordingly, Port=5040

Timeout=50 msec n Grayscale Print: Copies=1, Bits=12, Destination=Processor, Border=Black, Empty

Image=Black, Polarity=Normal, Magnification=Cubic, Smoothing=NORMAL, Trim=No n Media: Film=14INX17IN, Blue Film: Enable=On, Dmax=300, Dmin=leave blank n Formats: 1x1 Rows=leave blank, Columns=leave blank n Orientation: Landscape=On, Portrait=On n 1x2, 2x2, 2x3, 3x4 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Dornier Workstation

DICOM Network

Kodak 190 camera



Dornier workstation via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: Dornier workstation v1.0 Requirements: MIM200 v6.1, KELI 160 v7.2 Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak MIM200 KELI 160 n Description=K160, AETitle=K160, IPAddress=accordingly, Port=5040

Timeout=50 msec n Grayscale Print: Copies=1, Bits=12, Destination=Processor, Config.Info=CS435\CN0,

Border=Black, Empty Image=Black, Polarity=Normal, Magnification=Cubic, Smoothing=NORMAL, Trim=No

n Media: Film=14INX17IN, Blue Film: Enable=On, Dmax=300, Dmin=leave blank n Formats: 1x1 Rows=leave blank, Columns=leave blank n Orientation: Landscape=On, Portrait=On n 1x2, 2x2, 2x3, 3x4 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On

Dornier Workstation

Kodak MIM 200

DICOM Network


Kodak 160 camera



n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off






Requirements: Dornier workstation v1.0 Requirements: MIM200 v6.1, 2180 rel. 2.17H Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak MIM200 KELP 2180 n Description=K2180, AETitle=K2180, IPAddress=accordingly, Port=5040, Timeout=50

msec n Grayscale Print: Copies=1, Bits=12, Destination=Processor, Config.Info=CS435\CN0,





n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On

Dornier Workstation

Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 2180 camera




n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off






Requirements: Dornier workstation v1.0 Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak MIM200 KELP 1120 n Description=K1120, AETitle=K1120, IPAddress=accordingly, Port=5040, Timeout=50

msec n Grayscale Print: Copies=1, Bits=12, Destination=Processor, Config.Info=CS435\CN0,





n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On

Dornier Workstation

Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 1120 camera



n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off






Requirements: Dornier workstation v1.0 Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak MIM200 DryView 8200 n Description=DV8200, AETitle=K8200, IPAddress=accordingly, Port=5040, Timeout=50






n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On

Dornier Workstation

Kodak MIM 200

DICOM Network


Kodak DryView 8200



n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off






Requirements: Dornier workstation v1.0 Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into MIM200 Destination Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak MIM200 DryView 8500 n Description=DV8500, AETitle=K8500, IPAddress=accordingly, Port=5040, Timeout=50



n Media: Film=11INX14IN, Blue Film: Enable=On, Dmax=300, Dmin=leave blank n Formats: 1x1 Rows=leave blank, Columns=leave blank n Orientation: Landscape=On, Portrait=On n 1x2, 2x2, 2x3, 3x4 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set: n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue

Dornier Workstation


DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable



n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=11INx14IN (Always=N), Negotiate Color Print=Off 8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60





Requirements: Dornier workstation v1.0 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual camera

by basically using the correspondent Model into MIM200 Destination Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak MIM200 DryView 8700 n Description=DV8700, AETitle=K8700, IPAddress=accordingly, Port=5040, Timeout=50






n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue

Dornier Workstation


DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable



n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60





Requirements: Dornier workstation v1.0 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak MIM200 DryView 8100 n Description=DV8100, AETitle=K8100, IPAddress=accordingly, Port=5040, Timeout=50






n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On

Dornier Workstation


DICOM Network


Data 37-pin

RS4229-pole Plug



n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7








Requirements: Dornier workstation v1.0 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak MIM200 DryView 8300 n Description=DV8300, AETitle=K8300, IPAddress=accordingly, Port=5040, Timeout=50


Config.Info=LUT= u1_109b.w8u,10, Border=Black, Empty Image=Black, Polarity=Normal, Magnification=Cubic, Smoothing=2, Trim=No

n Media: Film=8INX10IN, Blue Film: Enable=On, Dmax=300, Dmin=leave blank n Formats: 1x1 Rows=leave blank, Columns=leave blank n Orientation: Landscape=On, Portrait=On n 1x2, 2x2 MIM200 Setup: n on Configure, Network:


n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On

Dornier Workstation


DICOM Network

Control 9 pin

Data 37 pin




n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify:

n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off




Dornier workstation via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: Dornier workstation v1.0 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak MIM200 DryView 8610 n Description=DV8610, AETitle=K8610, IPAddress=accordingly, Port=5040, Timeout=50

msec n Grayscale Print: Copies=1, Bits=12, Destination=Processor, Border=Black, Empty

Image=Black, Polarity=Normal, Magnification=Cubic, Smoothing=0, Trim=No n Media: Film=8INX10IN, Blue Film: Enable=On, Dmax=300, Dmin=-1 n Formats: 1x1 Rows=-1, Columns=-1, Orientation Landscape=On, Portrait=On n 1x2, 2x2 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60

n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On

Dornier Workstation


DICOM Network

Control 9 pin

Data 37 pin




n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=upmsv3kp.w8u (Always=Y), Contrast (dry)=5 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n ICCProfile=Off (Always=N), Modality=OT (Always=N) n BodyPart=Default (Always=N), Modality Group=1 n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Conv.Group=1, Gamma Table=1, Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off


n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5)

n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care






Requirements: Dornier workstation v1.0 Requirements: MIM200 v6.1, HQ 969 v5.2 Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak MIM200 HQ 969 n Description=HQ969, AETitle=K969, IPAddress=accordingly, Port=5040, Timeout=50



n Media: Film=14INX17IN, Blue Film: Enable=On, Dmax=300, Dmin=leave blank n Formats: 1x1 Rows=leave blank, Columns=leave blank n Orientation: Landscape=On, Portrait=On n 1x2, 2x2, 2x3, 3x4 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 969, Set: n General: Log.Name=969 n General: Database Name=969, Model=969, Memory=32 n Media Info: Media=35x43cm, 4096x5002, 4912, Blue n Media Info: Media= 11x14in, 3030x4096, 4006, Blue n Media Info: Media= 8x10in, 2086x2929, 2839, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On

Dornier Workstation

DICOM Network

Fiber Cable

Fiber Cable

Kodak M969 HQ


Kodak MIM 200



n Interpolation: Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.3457 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 969 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60




Requirements: Dornier workstation v1.0 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=eg Kodak MIM200 DryView 8200 n Description=DV8900, AETitle=8900, IPAddr=accordingly, Port=5040, Timeout=50 msec n Grayscale Print: Copies=1, Bits=12, Destination=Processor,


n Media: Film=14INX17IN, Blue Film: Enable=On, Dmax=300, Dmin=-1 n Formats: 1x1 Rows=-1, Columns=-1, Orientation Landscape=On, Portrait=On n 1x2, 2x2, 2x3, 3x4 8900 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On

Dornier Workstation

DICOM Network

Kodak DryView 8900



n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Pmsv3k.w87 (Always=N), Contrast=9 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ws




Requirements: Dornier workstation v1.0 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=eg Kodak MIM200 DryView 8200 n Description=DV8150, AETitle=DV8150, IPAddress=accordingly, Port=5040,


Config.Info=LUT=Pmsb.w87,9, Border=Black, Empty Image=Black, Polarity=Normal, Magnification=Cubic, Smoothing=2, Trim=No

n Media: Film=14INX17IN, Blue Film: Enable=On, Dmax=300, Dmin=-1 n Formats: 1x1 Rows=-1, Columns=-1, Orientation Landscape=On, Portrait=On n 1x2, 2x2, 2x3, 3x4 8150 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On

Dornier Workstation

DICOM Network

Kodak DryView 8150



n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10




Dornier workstation via DICOM with Kodak Color Medical Imager 1000

Requirements: Dornier workstation v1.0 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Dornier Setup: n Into DICOM/New/Server Type=Print Server n Choose Template Server=Kodak MIM200 DryView 8300 n Description=CMI1000, AETitle=CMI1000, IPAddress=accordingly, Port=5040,


Config.Info=LUT= u1_109b.w8u,10, Border=Black, Empty Image=Black, Polarity=Normal, Magnification=Cubic, Smoothing=0, Trim=No

n Media: Film=8INX10IN, Blue Film: Enable=On, Dmax=300, Dmin=-1 n Formats: 1x1 Rows=-1, Columns=-1, Orientation Landscape=On, Portrait=On n 1x2, 2x2 CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup:





n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings:

Dornier Workstation

DICOM Network

Kodak CMI 1000



n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (Always=Y), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No



Setup Manual for EBIT AET workstation DICOMED with LASER IMAGER Products


Setup for EBIT AET workstation DICOMED Review with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /





Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) ................................................................................................................. 12














DICOMED Review via DICOM with Kodak DryView 8300 LASER IMAGER

EBIT WorkstationDICOMED Review

Kodak DryView 8300

DICOM Network

Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: working only with DICOMED images with 8-bit depth DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=e.g., DV8300, Application Entity Type=Print Server n Remote Application Entity Title=8300, Remote AE IPaddr=accordingly n Listen Port=104, Configuration File=Kodak DV8300.ini n Into Dicom Printer Parameters\Printer Name=Kodak DV8300 set : n Bit Allocated Supported: 8 (i.e., only 8 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=LUT=0,10 n Film Box: Trim=NO, Smoothing Type=2 n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name=DV8300, Film Size=8INx10IN, n Medium Type=Blue Film, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=e.g., select a 3x2 table for a 6:1 format to be printed on the film 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=10, Sharp/Smooth=0 i.e., Auto n on 8300 Service Menu into Configure User set: Modality Group=0



DICOMED Review via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: 190 rel. 1.7.29 DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=e.g., Kodak 190, Application Entity Type=Print Server n Remote Application Entity Title=190, Remote AE IPaddr=accordingly n Listen Port=5040, Configuration File=Kodak 190.ini n Into Dicom Printer Parameters\Printer Name=Kodak 190 set : n Bit Allocated Supported: ALL (i.e., both 8 and 12 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=CS435\CN0 n Film Box: Trim=NO, Smoothing Type=NORMAL n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name=Kodak 190, Film Size=14INx17IN, n Medium Type=Blue Film, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=e.g., select a 5x4 table for a 20:1 format to be printed on the film 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



DICOMED Review via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /




DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=e.g., DV8700, Application Entity Type=Print Server n Remote Application Entity Title=9410, Remote Application Entity IPaddr=accordingly n Listen Port=1024, Configuration File=Kodak DV8700.ini n Into Dicom Printer Parameters\Printer Name=Kodak DV8700 set : n Bit Allocated Supported: ALL (i.e., both 8 and 12 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=LUT=Pmsv3k.w87,9 n Film Box: Trim=NO, Smoothing Type=2 n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name=DV8700, Film Size=14INx17IN, n Medium Type=Blue Film, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=e.g., select a 5x4 table for a 20:1 format to be printed on the film 9410 Setup: n on Device Setup, LOCAL PRINTERS:




n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users:

n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0








DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=e.g., DV8500, Application Entity Type=Print Server n Remote Application Entity Title=9410, Remote Application Entity IPaddr=accordingly n Listen Port=1024, Configuration File=Kodak DV8500.ini n Into Dicom Printer Parameters\Printer Name=Kodak DV8500 set : n Bit Allocated Supported: ALL (i.e., both 8 and 12 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=LUT=Pmsv3k.w87,9 n Film Box: Trim=NO, Smoothing Type=2 n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name=DV8500, Film Size=11INx14IN, n Medium Type=Blue Film, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=e.g., select a 5x4 table for a 20:1 format to be printed on the film 9410 Setup: n on Device Setup, LOCAL PRINTERS:













DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: 9410 v1.6, 8100 v2.4.1 DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=e.g., DV8100, Application Entity Type=Print Server n Remote Application Entity Title=9410, Remote Application Entity IPaddr=accordingly n Listen Port=1024, Configuration File=Kodak DV8100.ini n Into Dicom Printer Parameters\Printer Name=Kodak DV8100 set : n Bit Allocated Supported: ALL (i.e., both 8 and 12 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=LUT=Pmsb.w87,9 n Film Box: Trim=NO, Smoothing Type=2 n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name=DV8100, Film Size=14INx17IN, n Medium Type=Blue Film, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=e.g., select a 5x4 table for a 20:1 format to be printed on the film 9410 Setup:

on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87

on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5

on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly



n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0








DICOM Network

Control 9 pin

Data 37 pin


Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=e.g., DV9410_8300, Application Entity Type=Print Server n Remote Application Entity Title=9410, Remote Application Entity IPaddr=accordingly n Listen Port=1024, Configuration File=Kodak DV9410_8300.ini n Into Dicom Printer Parameters\Printer Name=Kodak DV9410_8300 set : n Bit Allocated Supported: 8 (i.e., only 8 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=LUT=0,10 n Film Box: Trim=NO, Smoothing Type=2 n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name=DV9410_8300, Film Size=8INx10IN, n Medium Type=Blue Film, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=e.g., select a 3x2 table for a 6:1 format to be printed on the film 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n SCU AETitle=accordingly, SCU IPAddr=accordingly



n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1






Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin


Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=e.g., DV8610, Application Entity Type=Print Server n Remote Application Entity Title=9410, Remote Application Entity IPaddr=accordingly n Listen Port=1024, Configuration File=Kodak DV8610.ini n Into Dicom Printer Parameters\Printer Name=Kodak DV8610 set : n Bit Allocated Supported: ALL (i.e., both 8 and 12 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=350, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=LUT=0,3 n Film Box: Trim=NO, Smoothing Type=1 n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name=DV8610, Film Size=8INx10IN, n Medium Type=Blue Film, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=e.g., select a 3x2 table for a 6:1 format to be printed on the film 9410 Setup: on SCP PRINTER Menu, Current Provider, SCP Parameters:

n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations=5 n on SCP PRINTER Menu, Registered User: n SCU AETitle=accordingly, SCU IPAddr=accordingly, SCP=8610 n Copies=1, Contrast Table=3, Max.Density=350 n Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Transmittance, Contrast Group=6, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No



n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

n on LOCAL PRINTER Menu: n Printer Name=8610, Model=8600/8610, Output Board=Copper n Baud Rate=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12 (8 if 8600), Header/Line, Timeout=60, Transfer Rate=2 MHz

n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT=don’t care n Max.Density=350, Contrast=3, Border Density=0

8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, VRTX32=1.08, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P, 2:1P, 4:1P, 6:1P n Gamma Table=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set:




DICOMED Review via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: MIM 200 v6.1, KELI 160 v7.2 DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=eg Kodak 160, Application Entity Type=Print Server n Remote Application Entity Title=160, Remote AE IPaddr=accordingly n Listen Port=5040, Configuration File=Kodak 160.ini n Into Dicom Printer Parameters\Printer Name= Kodak 160 set : n Bit Allocated Supported: ALL (ie both 8 and 12 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=CS435\CN0 n Film Box: Trim=NO, Smoothing Type=NORMAL n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name= Kodak 160, Film Size=14INx17IN, n Medium Type=Blue Film, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=eg select a 5x4 table for a 20:1 format to be printed on the film MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:

n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:

n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On


Kodak MIM 200

DICOM Network


Kodak 160 camera



n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7







Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: MIM 200 v6.1, 2180 rel. 2.17H DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=eg Kodak 2180, Application Entity Type=Print Server n Remote Application Entity Title=2180, Remote AE IPaddr=accordingly n Listen Port=5040, Configuration File=Kodak 2180.ini n Into Dicom Printer Parameters\Printer Name= Kodak 2180 set : n Bit Allocated Supported: ALL (ie both 8 and 12 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=CS435\CN0 n Film Box: Trim=NO, Smoothing Type=NORMAL n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name= Kodak 2180, Film Size=14INx17IN, n Medium Type=Blue Film, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=eg select a 5x4 table for a 20:1 format to be printed on the film MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)


Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 2180 camera



n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7







Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: MIM 200 v6.1, 1120 rel. 2.40/032 DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=eg Kodak 1120, Application Entity Type=Print Server n Remote Application Entity Title=1120, Remote AE IPaddr=accordingly n Listen Port=5040, Configuration File=Kodak 1120.ini n Into Dicom Printer Parameters\Printer Name= Kodak 1120 set : n Bit Allocated Supported: ALL (ie both 8 and 12 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=CS435\CN0 n Film Box: Trim=NO, Smoothing Type=NORMAL n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name= Kodak 1120, Film Size=14INx17IN, n Medium Type=Blue Film, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=eg select a 5x4 table for a 20:1 format to be printed on the film MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)


Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 1120 camera



n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Modality=OT (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=Black (Always=N) n Interpolation=Cubic, Border Dmax=3.99 n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off






Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: MIM 200 v6.1, DV8200 v3.5 Note: This setup is basically also valid for 25 PS computer DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=eg DV8200, Application Entity Type=Print Server n Remote Application Entity Title=8200, Remote AE IPaddr=accordingly n Listen Port=5040, Configuration File=Kodak DV8200.ini n Into Dicom Printer Parameters\Printer Name= Kodak DV8200 set : n Bit Allocated Supported: ALL (ie both 8 and 12 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=LUT=Pmsb.w87,9 n Film Box: Trim=NO, Smoothing Type=2 n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name= DV8200, Film Size=14INx17IN, n Medium Type=Blue Film, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=eg select a 5x4 table for a 20:1 format to be printed on the film MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Blue


Kodak MIM 200

DICOM Network


Kodak DryView 8200



n Media Info: Media=35x35cm, 4361x4247, 4157, Blue n Media Info: Media=11x14in, 3272x4361, 4271, Blue n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On n Formatting: Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20 n Formatting: Max Img Col=0, Max Img Row=0, n Formatting: Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.1 n SCU: Density Space= On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n at Keypad connected to MIM, press Menu, Service Menu, SCP Services: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off

8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smooth=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025





Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=eg DV8700, Application Entity Type=Print Server n Remote Application Entity Title=8700, Remote Application Entity IPaddr=accordingly n Listen Port=5040, Configuration File=Kodak DV8700.ini n Into Dicom Printer Parameters\Printer Name= Kodak DV8700 set : n Bit Allocated Supported: ALL (ie both 8 and 12 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=LUT=Pmsv3k.w87,9 n Film Box: Trim=NO, Smoothing Type=2 n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name= DV8700, Film Size=14INx17IN, n Medium Type=Blue Film, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=eg select a 5x4 table for a 20:1 format to be printed on the film MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700




Fiber Cable

Kodak MIM 200



n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7







Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into MIM200 Destination DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=eg DV8500, Application Entity Type=Print Server n Remote Application Entity Title=8500, Remote Application Entity IPaddr=accordingly n Listen Port=5040, Configuration File=Kodak DV8500.ini n Into Dicom Printer Parameters\Printer Name= Kodak DV8500 set : n Bit Allocated Supported: ALL (ie both 8 and 12 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=LUT=Pmsv3k.w87,9 n Film Box: Trim=NO, Smoothing Type=2 n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name= DV8500, Film Size=11INx14IN, n Medium Type=Blue Film, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=eg select a 5x4 table for a 20:1 format to be printed on the film MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set: n General: Log.Name=8500




Fiber Cable

Kodak MIM 200



n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=11INx14IN (Always=N) n Negotiate Color Print=Off 8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Disable Even, Timeout=60





Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=eg DV8100, Application Entity Type=Print Server n Remote Application Entity Title=8100, Remote Application Entity IPaddr=accordingly n Listen Port=5040, Configuration File=Kodak DV8100.ini n Into Dicom Printer Parameters\Printer Name= Kodak DV8100 set : n Bit Allocated Supported: ALL (ie both 8 and 12 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=LUT=Pmsb.w87,9 n Film Box: Trim=NO, Smoothing Type=2 n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name= DV8100, Film Size=14INx17IN, n Medium Type=Blue Film, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=eg select a 5x4 table for a 20:1 format to be printed on the film MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even

Kodak DryView 8100

DICOM Network


Data 37-pin

RS4229-pole Plug


Kodak MIM 200



n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7








Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=eg DV9410_8300, Application Entity Type=Print Server n Remote Application Entity Title=8300, Remote Application Entity IPaddr=accordingly n Listen Port=5040, Configuration File=Kodak DV9410_8300.ini n Into Dicom Printer Parameters\Printer Name= Kodak DV9410_8300 set : n Bit Allocated Supported: 8 (ie only 8 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=LUT=0,10 n Film Box: Trim=NO, Smoothing Type=2 n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name= DV9410_8300, Film Size=8INx10IN, n Medium Type=Blue Film, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=eg select a 3x2 table for a 6:1 format to be printed on the film MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even

Kodak DryView 8300

DICOM Network

Control 9 pin

Data 37 pin



Kodak MIM 200



n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5





DICOMED Review via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=eg DV8610, Application Entity Type=Print Server n Remote Application Entity Title=8610, Remote Application Entity IPaddr=accordingly n Listen Port=5040, Configuration File=Kodak DV8610.ini n Into Dicom Printer Parameters\Printer Name= Kodak DV8610 set : n Bit Allocated Supported: ALL (ie both 8 and 12 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=350, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=LUT=0,3 n Film Box: Trim=NO, Smoothing Type=1 n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name= DV8610, Film Size=8INx10IN, n Medium Type=Blue Film, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=eg select a 3x2 table for a 6:1 format to be printed on the film MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600)


Kodak DryView 8610

DICOM Network

Control 9 pin

Data 37 pin


Kodak MIM 200



n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=upmsv3kp.w8u (Always=N), Contrast (dry)=5 (Always=N) n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=mr n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set:





Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=eg DV8900, Application Entity Type=Print Server n Remote Applic. Entity Title=8900, Remote Applic. Entity IPaddr=accordingly n Listen Port=5040, Configuration File=Kodak DV8900.ini (or DV8200.ini) n Into Dicom Printer Parameters\Printer Name= Kodak DV8900 set : n Bit Allocated Supported: ALL (ie both 8 and 12 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=LUT=Pmsv3k.w87,9 n Film Box: Trim=NO, Smoothing Type=2 n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name= DV8900, Film Size=14INx17IN, n Medium Type=Blue Film, Orientation=Portrait, Magnific.Type=Cubic, Copies=1 n Row/Col=eg select a 5x4 table for a 20:1 format to be printed on the film 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr= accordingly n on Configuration, System, Software License:

n License Status=Mammo Key is OFF n on Configuration, DICOM SCP, Communications:




DICOM Network

Kodak DryView 8900




n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Pmsv3k.w87 (Always=N), Contrast=9 (Always=N) n Smoothing Type=2 (Always= N), Image Polarity (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ws




Requirements: DICOMED Review rel. 3.0, DICOM level v3.07 Requirements: 8150 v1.0.2.b04 (ie DRE v1.0.2.b04, MIM v5.7.b8) DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=eg DV8150, Application Entity Type=Print Server n Remote Applic. Entity Title=DV8150, Remote Applic. Entity IPaddr=accordingly n Listen Port=5040, Configuration File=Kodak DV 8150.ini (or DV8200.ini) n Into Dicom Printer Parameters\Printer Name= Kodak DV8150 set : n Bit Allocated Supported: ALL (ie both 8 and 12 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=LUT=Pmsb.w87,9 n Film Box: Trim=NO, Smoothing Type=2 n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name= DV8150, Film Size=14INx17IN, n Medium Type=Blue Film, Orientation=Portrait, Magnific.Type=Cubic, Copies=1 n Row/Col=eg select a 5x4 table for a 20:1 format to be printed on the film 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:


n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On


DICOM Network

Kodak DryView 8150



n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10




DICOMED Review via DICOM with Kodak Color Medical Imager 1000

Requirements: DICOMED Review rel. 3.0, DICOM level v3.0.7 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) DICOMED Review Setup: n into Local DB,Configure, into Server Setting Parameters select Add, set: n Application Entity Name=e.g., CMI1000, Application Entity Type=Print Server n Remote Application Entity Title=CMI1000, Remote AE IPaddr=accordingly n Listen Port=5040, Configuration File=Kodak CMI1000.ini n Into Dicom Printer Parameters\Printer Name=Kodak CMI1000 set : n Bit Allocated Supported: 8 (i.e., only 8 bit images are sent) n Film Session: Print Priority=MED, Film Destination=PROCESSOR n Film Box: Max Density=300, Border Density=BLACK, Empty Image=BLACK n Film Box: Config.Information=LUT=Pmsv3k.w87,9 n Film Box: Trim=NO, Smoothing Type=2 n Printer Setting: Magnification=CUBIC n into Print, set: Printer Name=CMI1000, Film Size=A4 (or 8_5INX11IN), n Medium Type=Paper, Orientation=Portrait, Magnification Type=Cubic, Copies=1 n Row/Col=e.g., select a 3x2 table for a 6:1 format to be printed on the film CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)


n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:

DICOM Network

Kodak CMI 1000




n under Image Quality, Grayscale Image Quality: n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (Always=Y), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No



Esaote MR Artoscan/Escan with LASER IMAGER Products


Setup for Esaote MR Artoscan/Escan (Unix Solaris platform) with LASER IMAGERS Connection POINT-TO-POINT (digital / keypad): n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8700 LASER IMAGER / Dual.............................................................. 3 n Kodak DryView 8700 LASER IMAGER / Plus............................................................... 4 n Kodak DryView 8700 LASER IMAGER / Standard ....................................................... 5 n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8500 LASER IMAGER / Dual.............................................................. 6 n Kodak DryView 8500 LASER IMAGER / Plus............................................................... 7 n Kodak DryView 8500 LASER IMAGER / Standard ....................................................... 8 n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8300 LASER IMAGER / Dual.............................................................. 9 n Kodak DryView 8300 LASER IMAGER / Standalone.................................................... 10 n Kodak Digital Science 969 HQ LASER IMAGER...................................................... 11 n Kodak Digital Science 969 HQT LASER IMAGER ................................................... 12 n Kodak Digital Science 959 XL LASER IMAGER ...................................................... 13 n Kodak DryView 8100 LASER IMAGER......................................................................... 14 n Kodak PACS LINK 9410 ACQUISITION SYSTEM /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (not working, DICOM recommended)

n Kodak PACS LINK 9410 ACQUISITION SYSTEM / Kodak DryView 8100 LASER IMAGER (not working, via DICOM recommended)

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER(2,3,4) .................................................................. 15

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER(2,3,4) ............................................................... 17

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER(2,3,4) ............................................................... 19





Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 25 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 26 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (1) . 27 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /





n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 37

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 39


n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)................................................................ 43

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)(4,5) 45

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (4,5) ............ 47

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 49

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 51

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (4,5) .......................................................................................................... 53


1 Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. 2 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER.



Esaote MR Artoscan/Escan with Kodak DryView 8800 MULTI-INPUT MANAGER /


DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB

Keypad

Digital Board Data output

Keypad

Data Cable 37-pin

Esaote Artoscan MR

8700 DualFiber Cable

3M 8700 DryView

3M8800Multi-In

putManag

er

Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: 8800 rel. 5.1, 8700 rel. 1.22 Note: on MR Digital Board, with jumper W12 image data parity is set:

with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd

Note: on MR in case of image acquisition error try to reset the MR Digital Board by entering in Menu: Help->Exposure: Reset Dig. Prn.

To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8800/8700 Dual Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10



Esaote MR Artoscan/Escan with Kodak DryView 8700 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB

Keypad


Keypad

Data Cable 37-pin

Esaote Artoscan MR

8700 Plus

3M 8700 DryView

Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: 8700 rel. 1.22 Note: on MR Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10



Esaote MR Artoscan/Escan with Kodak DryView 8700 LASER IMAGER / Standard

Keypad


Data Cable 37-pin

Esaote Artoscan MR

8700 Standard

3M 8700 DryView




To Print: Select an image on MR monitor, press acquire button at camera keypad 8700 Standard Setup: n on TDB/C board:

n Jumpers=RS422, Switch=Left n on COMM Menu:

n 8700 Keypad Default n on IMAGE Menu:

n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on SYSTEM Menu:


n Parity=Enable Even (if error set to Disable), Timeout=10





DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB

Keypad


Keypad

Data Cable 37-pin

Esaote Artoscan MR

8500 DualFiber Cable

3M 8700 DryView

3M8800Multi-In

putManag

er




To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8800/8500 Dual Setup: n on COMM Menu:


n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on EIB Menu:




Esaote MR Artoscan/Escan Kodak DryView 8500 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB

Keypad


Keypad

Data Cable 37-pin

Esaote Artoscan MR

8500 Plus

3M 8700 DryView

Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: 8500 Plus rel. 1.22 Note: on MR Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10



Esaote MR Artoscan/Escan with Kodak DryView 8500 LASER IMAGER / Standard

Keypad


Data Cable 37-pin

Esaote Artoscan MR

8500 Standard

3M 8700 DryView

Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: 8500 Standard rel. 1.22 Note: on MR Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad 8500 Standard Setup: n on TDB/C board:

n Jumpers=RS422, Switch=Left n on COMM Menu:

n 8700 Keypad Default n on IMAGE Menu:

n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on SYSTEM Menu:







DryView 8300 Dual

DEIB

Fiber Cable

Fiber Cable

Fiber Cable

8800 MIM

POEIB37-pin Digital Cable

9-to-9-pin Copper Cable

UKEIB

Keypad


Keypad

Data Cable 37-pin

Esaote Artoscan MR

3M8800Multi-InputManager




To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8300 Setup: n on 8300 Operator Menu set: Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set:

n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Protocol=3M

n Digital Interface: Parity=None n Modality Group=0 n



8800 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: Density=16, Contrast=10 n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10



Esaote MR Artoscan/Escan with Kodak DryView 8300 LASER IMAGER / Standalone

Keypad

Digital Board Data outputData Cable 37-pin

Esaote Artoscan MRDryView 8300




To Print: Select an image on MR monitor, press acquire button at camera keypad 8300 Setup: n on 8300 Operator Menu into Configure User set:

n Density=16 n Contrast=10 n Sharp/Smooth=0

n on 8300 Service Menu into Configure User set: n Serial Control Interface: Protocol=Keypad n Digital Interface: Parity=Even (if error set to Disable) n Modality Group=0



Esaote MR Artoscan/Escan with Kodak Digital Science 969 HQ LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M969 HQ

UKEIB

Keypad


Keypad

Data Cable 37-pin

Esaote Artoscan MR


Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: M969 HQ rel. 5.1 Note: on MR Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center M969 HQ Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10



Esaote MR Artoscan/Escan with| Kodak Digital Science 969 HQT LASER IMAGER

Keypad


Data Cable 37-pin

Esaote Artoscan MR

M969 HQT


Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0 Note: on MR Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad M969 HQT Setup: n on TDB/C board: Jumpers=RS422, Switch=Left n on COMM Menu: 8700 Keypad Default n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry)

n TFT=PMS, Contrast=15, Density=7, on OIC Menu: Chemistry=2 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10



Esaote MR Artoscan/Escan with Kodak Digital Science 959 XL LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M959 XL

UKEIB

XL Keypad


Keypad

Data Cable 37-pin

Esaote Artoscan MR

3 M L a ser I m a g er

Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: M959 XL rel. 3.8 Note: on MR Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: n on XL Control Panel set Density & Contrast depending on chemistry n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center n on XL Input Module install LUT 322A0 M959 XL Setup: n on COMM Menu:

n 959 Default n on EIB Menu:




Esaote MR Artoscan/Escan with Kodak DryView 8100 LASER IMAGER

Copper Cable

UKEIB

Keypad

Digital Board Data OUT

Keypad

Data Cable 37-pin

Esaote MR- Artoscan- Escan

DryView 8100

Imager

RS422 9-pole Plug

Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: 8100 v1.1 Note: on MR Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=10, P1,…,P6=0

n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=2 n on IMAGE QUALITY-> TFT FILES Menu: TFT=PMSB n on LOCAL PANEL Menu: Contrast=9, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Even (if error Disable)



Esaote MR Artoscan/Escan with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: MIM 200 v6.1, KELI 160 v7.2 Note: on MR Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: Image Data not lutted by MR, lutted by Camera Note: on MR in case of image acquisition error try to reset the MR Digital Board

by entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad MIM200 Setup: n on Configure, Network:


n on Config., Input, Direct Connect, Config.Add, Digital, Qual=Esaote Artoscan: n Board/Channel=Digital Board 1 Channel 1, Logical Name= esamr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off

n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=1, Sync=Off, Pixel=8

n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2

Data Cable 37-pin

Kodak MIM 200

Esaote MRUnix Solaris platform- Artoscan- Escan

Digital BoardData OUT

Kodak 160 camera

RS422 37-to-50 pinDigital Adaptor Cable


Kpad / Host Control Octopus Adaptor Cable

Keypad



n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:

n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup:

n Select Destination=KELI 160, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:

n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On






Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: MIM 200 v6.1, KELP 2180 v2.17H Note: on MR Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: Image Data not lutted by MR, lutted by Camera Note: on MR in case of image acquisition error try to reset the MR Digital Board





n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On

Data Cable 37-pin

Kodak MIM 200



Kodak 2180 camera




Keypad



n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:


n Select Destination=KELP 2180, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:

n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console= On






Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Note: on MR Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: Image Data not lutted by MR, lutted by Camera Note: on MR in case of image acquisition error try to reset the MR Digital Board





n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On

Data Cable 37-pin

Kodak MIM 200



Kodak 1120 camera




Keypad



n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:


n Select Destination=KELP 1120, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:







Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM 200 Destinations Note: on MR Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: Image Data not lutted by MR, lutted by Camera Note: on MR in case of image acquisition error try to reset the MR Digital Board entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad MIM200 Setup: n on Configure, Network: n Computer Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config., Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Jazz: n Board/Channel=Digital Board 1 Channel 1, Logical Name=smr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On

Keypad

Kodak MIM 200


Fiber Cable

Fiber Cable

3M 8700 DryView





Data Cable 37-pin



n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination= 8700, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:

n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=9 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= Pmsv3k.w87, Auto Study=Off, Console=On, Annotation=Off






Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: MIM200 v6.1, 8100 v2.4.1 Note: on MR Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: Image Data not lutted by MR, lutted by Camera Note: on MR in case of image acquisition error try to reset the MR Digital Board entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad MIM200 Setup: n on Configure, Network:


n on Config., Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Jazz: n Board/Channel=Digital Board 1 Channel 1, Logical Name=smr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:

n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

KeypadEsaote MRUnix Solaris platform- Artoscan- Escan

Kodak MIM 200


COPCIL BoardCopper Cable

Control 9-pin

Data 37 pin

RS4229-pole Plug

Kodak DryView 8100


Data Cable 37-pinRS422 37-to-50 pinDigital Adaptor Cable



n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination= 8100, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=9 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= Pmsb.w87, Auto Study=Off, Console=On, Annotation=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even



Esaote MR Artoscan/Escan via DICOM with Kodak DryView 8300 LASER IMAGER


Kodak DryView 8300

DICOM Network

Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, Contrast=10, Modality Group=0 Artoscan / Escan MR Setup: n in Help/Service/Options/DICOM 3 Option set:

n Printer host name=dryview, Printer IP addr=accordingly n Printer TCP port=104, Printer AE title=8300

n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=BLUE FILM n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=0, Border Density=BLACK, Empty img.density=BLACK n Max Density=300, Config.Information=LUT=0,10, Trim=YES (is always yes)

n in Menu: Help->Print Layout set: 8x10 Size, e.g., 6 images (i.e., Format=6:1) n to acquire image on screen, press F6 or in Menu: Help->Print Layout set: Queue Image n automatic print after last F6 totally filled the film or in Help/Print Layout: Print Film

8300 Setup: n on 8300 Operator Menu into Configure User set:

n Density=16, Contrast=10, Sharp/Smooth=0 i.e., Auto n on 8300 Service Menu into Configure User set: Modality Group=0



Esaote MR Artoscan/Escan via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: 190 rel. 1.7.29 Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 Artoscan / Escan MR Setup: n in Help/Service/Options/DICOM 3 Option set:

n Printer host name=k190, Printer IP addr=accordingly n Printer TCP port=5040, Printer AE title=190

n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=ANY n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=NORMAL, Border Density=BLACK n Empty img.density=BLACK, Max Density=300, Min Density=0 n Config.Information=CS435, Trim=YES (is always yes)

n in Menu: Help->Print Layout set: 14x17 Size, e.g., 20 images (i.e., Format=20:1) n to acquire image on screen, press F6 or in Menu: Help->Print Layout set: Queue Image n automatic print after last F6 totally filled the film or in Help/Print Layout: Print Film 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



Esaote MR Artoscan/Escan via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /





DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=9, TFT=PMS Artoscan / Escan MR Setup: n in Menu: Help->Service->Option->DICOM 3 Option set:


n in Help/Service/Option/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=BLUE FILM n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=2, Border Density=BLACK, Empty img.density=BLACK n Max Density=300, Config.Information=LUT=0,9, Trim=YES (is always yes)






n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title=9410, Port=1024, Max Associations=5

n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0




Esaote MR Artoscan/Escan via DICOM with| Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /





DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera


















DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: 9410 v1.6, 8100 v2.4.1 Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=9, TFT=PMSB Artoscan / Escan MR Setup: n in Help/Service/Options/DICOM 3 Option set:






9410 Setup: on Device Setup, LOCAL PRINTERS:

n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87


on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0








DICOM Network

Control 9 pin

Data 37 pin


Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=10, TFT=u1_109b (i.e., mod.group=0) Artoscan / Escan MR Setup: n in Help/Service/Options/DICOM 3 Option set:









n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0




Esaote MR Artoscan/Escan via DICOM with| Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /



Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin


Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=5, TFT=Contrast Group=1 Artoscan / Escan MR Setup: n in Help/Service/Options/DICOM 3 Option set:







n Printer=8610, Model=8600/8610, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=12 (8 if 8600), Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT=don’t care n Max.Density=300, Contrast=5, Border Density=0


n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=5, Max.Density=300 n Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Gamma Table=Linear in Transmittance, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0







Esaote MR Artoscan/Escan via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: MIM 200 v6.1, KELI 160 v7.2 Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera




n in Menu: Help->Print Layout set: 14x17 Size, eg 20 images (ie Format=20:1) n to acquire image on screen, press F6 or in Menu: Help->Print Layout set: Queue Image n automatic print after last F6 totally filled the film or in Help/Print Layout: Print Film MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)


Kodak MIM 200

DICOM Network


Kodak 160 camera



n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7







Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera







n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)


Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 2180 camera



n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7







Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera







n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)


Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 1120 camera



n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7







Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: MIM 200 v6.1, DV8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera







n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Blue


Kodak MIM 200

DICOM Network


Kodak DryView 8200



n Media Info: Media=35x35cm, 4361x4247, 4157, Blue n Media Info: Media=11x14in, 3272x4361, 4271, Blue n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On n Formatting: Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20 n Formatting: Max Img Col=0, Max Img Row=0, n Formatting: Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.1 n SCU: Density Space= On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7







Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=9, TFT=PMSV3K Artoscan / Escan MR Setup: n in Help/Service/Options/DICOM 3 Option set:



n in Menu: Help->Print Layout set: Film Size=14x17, eg Division=20 (ie Format=20:1) n to acquire image on screen, press F6 or in Menu: Help->Print Layout set: Queue Image n automatic print after last F6 totally filled the film or in Help/Print Layout: Print Film MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:




Fiber Cable

Kodak MIM 200



n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60





Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into MIM200 Destination Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=9, TFT=PMSV3K Artoscan / Escan MR Setup: n in Help/Service/Options/DICOM 3 Option set:



n in Menu: Help->Print Layout set: Film Size=11x14, eg Division=20 (ie Format=20:1) n to acquire image on screen, press F6 or in Menu: Help->Print Layout set: Queue Image n automatic print after last F6 totally filled the film or in Help/Print Layout: Print Film MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set:




Fiber Cable

Kodak MIM 200



n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=11INx14IN (Always=N) n Negotiate Color Print=Off 8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60





Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera




n in Menu: Help->Print Layout set: Film Size=14x17, eg Division=20 (ie Format=20:1) n to acquire image on screen, press F6 or in Menu: Help->Print Layout set: Queue Image n automatic print after last F6 totally filled the film or in Help/Print Layout: Print Film MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue

Kodak DryView 8100

DICOM Network


Data 37-pin

RS4229-pole Plug


Kodak MIM 200



n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7



n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even





Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, Contrast=10, Modality Group=0 Artoscan / Escan MR Setup: n in Help/Service/Options/DICOM 3 Option set:

- Printer host name=dryview, Printer IP addr=accordingly - Printer TCP port=5040, Printer AE title=8300

n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): - Film Orientation=PORTRAIT, Medium Type=BLUE FILM - Film Destination=PROCESSOR, Magnification Type=CUBIC - Print Smoothing=0, Border Density=BLACK, Empty img.density=BLACK - Max Density=300, Config.Information=LUT=0,10, Trim=YES (is always yes)

n in Menu: Help->Print Layout set: Film Size=8x10, eg Division=6 (ie Format=6:1) n to acquire image on screen, press F6 or in Menu: Help->Print Layout set: Queue Image n automatic print after last F6 totally filled the film or in Help/Print Layout: Print Film MIM200 Setup: n on Configure, Network:




Kodak DryView 8300

DICOM Network

Control 9 pin

Data 37 pin



Kodak MIM 200



n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=0 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N)

n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N)

n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off

8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1



Esaote MR Artoscan/Escan via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS compute Note: This setup is basically also valid for 8600 camera Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=5, TFT=Contrast Group=1 Artoscan / Escan MR Setup: n in Help/Service/Options/DICOM 3 Option set:

- Printer host name=dryview, Printer IP addr=accordingly - Printer TCP port=5040, Printer AE title=8610

n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): - Film Orientation=PORTRAIT, Medium Type=BLUE FILM - Film Destination=PROCESSOR, Magnification Type=CUBIC - Print Smoothing=0, Border Density=BLACK, Empty img.density=BLACK - Max Density=300, Config.Information=LUT=0,5, Trim=YES (is always yes)




n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database=8610 (or 8600), Model=8610 (or 8600), Memory=32


Kodak DryView 8610

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin




n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line,Transfer=2000,Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= upmsv3kp.w8u (Always=N), Contrast (dry)=5 (Always=N) n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=1 (Always=Y), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None (Always=N) n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off








Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera




n in Menu: Help->Print Layout set: Film Size=14x17, eg Division=20 (ie Format=20:1) n to acquire image on screen, press F6 or in Menu: Help->Print Layout set: Queue Image n automatic print after last F6 totally filled the film or in Help/Print Layout: Print Film 8900 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any


DICOM Network

Kodak DryView 8900




n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Pmsb.w87 (Always=N), Contrast=9 (Always=N) n Smoothing Type=2 (Always= N), Image Polarity (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=mr




Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera


n Printer host name=dryview, Printer IP addr=accordingly n Printer TCP port=5040, Printer AE title=DV8150


n in Menu: Help->Print Layout set: Film Size=14x17, eg Division=20 (ie Format=20:1) n to acquire image on screen, press F6 or in Menu: Help->Print Layout set: Queue Image n automatic print after last F6 totally filled the film or in Help/Print Layout: Print Film 8150 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On


DICOM Network

Kodak DryView 8150



n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10




Esaote MR Artoscan/Escan via DICOM with Kodak Color Medical Imager 1000

Requirements: Artoscan MR rel. 5.6A (build 6.1F), Escan MR rel. 1.1A (build 6.1F) Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=9, TFT=PMSV3KB Artoscan / Escan MR Setup: n in Help/Service/Options/DICOM 3 Option set:

- Printer host name=CMI1000, Printer IP addr=accordingly - Printer TCP port=5040, Printer AE title=CMI1000

n in Help/Service/Options/Printer Option set (writing params with capital letters !): - Film Orientation=PORTRAIT, Medium Type=BLUE FILM - Film Destination=PROCESSOR, Magnification Type=CUBIC - Print Smoothing=2, Border Density=BLACK, Empty img.density=BLACK - Max Density=300, Config.Information=LUT=0,9, Trim=YES (is always yes)

n in Menu: Help->Print Layout set: Film Size=8x10, eg Division=6 (ie Format=6:1) n to acquire image on screen, press F6 or in Menu: Help->Print Layout set: Queue Image n automatic print after last F6 totally filled the film or in Help/Print Layout: Print Film CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup:






DICOM Network

Kodak CMI 1000






Esaote MR Artoscan-C/C-scan/Escan with LASER IMAGER Products


Setup for Esaote MR Artoscan-C/C-scan/Escan (WinNT platform) with LASER IMAGERS Connection POINT-TO-POINT (digital / keypad): n Kodak DryView 8700 LASER IMAGER / Plus

(see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) .................................... 3 n Kodak DryView 8300 LASER IMAGER......................................................................... 4 n Kodak Digital Science 969 HQT LASER IMAGER ................................................... 5 n Kodak Digital Science 959 XL LASER IMAGER ...................................................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8700 Dual and HQ) (not tested yet, DICOM recommended)

n Kodak PACS LINK 9410 ACQUISITION SYSTEM / Kodak DryView 8100 LASER IMAGER (not tested yet, via DICOM recommended)

n Kodak DryView 8100 LASER IMAGER......................................................................... 7 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 8 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (4) . 14 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8100 LASER IMAGER (4).................................................................... 16 Connection POINT-TO-POINT (video / keypad): n Kodak DryView 8700 LASER IMAGER / Plus

(see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) .................................... 18 n Kodak DryView 8100 LASER IMAGER......................................................................... 19



Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 20 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 21 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /






n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................ 32



n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)............................................................... 38

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)(4,5) 40

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (4,5) ............ 42

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5) ................................................................. 44

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5) ................................................................. 46

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (4,5) .......................................................................................................... 48


1 setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. 2 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, 6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER.



Artoscan-C/C-scan/Escan via digital/keypad with Kodak DryView 8700 LASER IMAGER / Plus

(see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ)

DEIB

Fiber Cable

Fiber Cable

UKEIB

Keypad


Keypad

Data Cable 37-pin

Esaote MRWinNT platform- Artoscan-C- C-scan- Escan

Kodak DryView 8700 Plus3M8700 DryView

Requirements: Artoscan-C v7.3B, C-scan v7.3B, Escan XQ v3.1B, 8700 v1.26 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras Note: Image Data not lutted by MR, lutted by Camera To Print: Select an image on MR monitor, press print button at MR monitor, press acquire button at camera keypad Note: in case the image quality matching between monitor and film is not ok, into 8700 IMAGE Menu set: TFT=C3b5ax4.w87,Dmax=280,Contrast =9 8700 Plus Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center n on COMM Menu: 969 Default n on IMAGE Menu: TFT=PMSV3K, Dmax=3.00, C=9, D=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Pixel=8, Header/Line, Port=0, Parity=Disable, Timeout=10



Artoscan-C/C-scan/Escan via digital/keypad with Kodak DryView 8300 LASER IMAGER

Keypad

Digital Board Data outputData Cable 37-pin


Kodak DryView 8300

Requirements: Artoscan-C v7.3B, C-scan v7.3B, Escan XQ v3.1B, 8300 v4.9.1 Note: Image Data not lutted by MR, lutted by Camera To Print: Select an image on MR monitor, press print button at MR monitor, press acquire button at camera keypad 8300 Setup: n on 8300 Operator Menu into Configure User set:

n Density=16, Contrast=10, Sharp/Smooth=0 i.e., Auto n on 8300 Service Menu into Configure User set:

n Serial Control Interface: Protocol=Keypad n Digital Interface: Parity=None, Modality Group=0



Artoscan-C/C-scan/Escan via digital/keypad with Kodak Digital Science 969 HQT LASER IMAGER

Keypad


Data Cable 37-pin


Kodak M969 HQT


Requirements: Artoscan-C v7.3B, C-scan v7.3B, Escan XQ v3.1B, 969 HQT v2.0 Note: Image Data not lutted by MR, lutted by Camera To Print: Select an image on MR monitor, press print button at MR monitor, press acquire button at camera keypad M969 HQT Setup: n on TDB/C board: Jumpers=RS422, Switch=Left n on COMM Menu: 8700 Keypad Default n on IMAGE Menu: (note: values suitable for 60 secs chemistry)

n TFT=693C0, Contrast=6, Density=12, on OIC Menu: Chemistry=2 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Pixel=8, Header/Line, Port=0, Parity=Disable, Timeout=10



Artoscan-C/C-scan/Escan via digital/keypad with Kodak Digital Science 959 XL LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

Kodak M959 XL

UKEIB

XL Keypad


Keypad

Data Cable 37-pin


3 M L a s e r I m a g e r

Requirements: Artoscan-C v7.3B, C-scan v7.3B, Escan XQ v3.1B, 959 XL v3.8 Note: Image Data not lutted by MR, lutted by Camera To Print: Select an image on MR monitor, press print button at MR monitor, press acquire button at camera keypad M959 XL Setup: n on XL Control Panel set Density & Contrast depending on chemistry n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center n on XL Input Module install LUT 322A0 n on COMM Menu: 959 Default n on EIB Menu: Pixel=8, Header/Line, Port=0, Parity=Disable, Timeout=10



Artoscan-C/C-scan/Escan via digital/keypad with Kodak DryView 8100 LASER IMAGER

Copper Cable

UKEIB

Keypad

Digital Board Data OUT

Keypad

Data Cable 37-pin


Kodak DryView 8100

Imager

RS422 9-pole Plug

Requirements: Artoscan-C v7.3B, C-scan v7.3B, Escan XQ v3.1B, 8100 v2.1.2 Note: Image Data not lutted by MR, lutted by Camera To Print: Select an image on MR monitor, press print button at MR monitor, press acquire button at camera keypad Note: in case the image quality matching between monitor and film is not ok, into 8100 IMAGE QUALITY/TFT FILES set: TFT=C3b5ax4.w87 8100 LOCAL PANEL set: Dmax=280, Contrast =9 8100 Setup on CONFIGURATION Menu: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=10, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=2 n on IMAGE QUALITY-> TFT FILES Menu: TFT=PMSB n on LOCAL PANEL Menu: Contrast=9, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Disable



Artoscan-C/C-scan/Escan via digital/keypad with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: Artoscan-C v7.3B, C-scan v7.3B, Escan XQ v3.1B Requirements: MIM 200 v6.1, KELI 160 v7.2 Note: Image Data not lutted by MR, lutted by Camera To Print: Select an image on MR monitor, press print button at MR monitor,

press acquire button at camera keypad MIM200 Setup: n on Configure, Network:




n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0

Data Cable 37-pin

Kodak MIM 200



Kodak 160 camera




Keypad



n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:


n Select Destination=KELI 160, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:

n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On






Requirements: Artoscan-C v7.3B, C-scan v7.3B, Escan XQ v3.1B Requirements: MIM 200 v6.1, KELP 2180 v2.17H Note: Image Data not lutted by MR, lutted by Camera To Print: Select an image on MR monitor, press print button at MR monitor,

press acquire button at camera keypad MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config., Input, Direct Connect, Config.Add, Digital, Qual=Esaote Artoscan: n Board/Channel=Digital Board 1 Channel 1, Logical Name= esamr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=10, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0

Data Cable 37-pin

Kodak MIM 200



Kodak 2180 camera


Fiber Cable


Keypad



n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:

n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELP 2180, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:







Requirements: Artoscan-C v7.3B, C-scan v7.3B, Escan XQ v3.1B Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Note: Image Data not lutted by MR, lutted by Camera To Print: Select an image on MR monitor, press print button at MR monitor,

press acquire button at camera keypad MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config., Input, Direct Connect, Config.Add, Digital, Qual=Esaote Artoscan: n Board/Channel=Digital Board 1 Channel 1, Logical Name= esamr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=10, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0

Data Cable 37-pin

Kodak MIM 200



Kodak 1120 camera


Fiber Cable


Keypad



n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:

n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELP 1120, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:







Requirements: Artoscan-C v7.3B, C-scan v7.3B, Escan XQ v3.1B Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM 200 Destinations Note: Image Data not lutted by MR, lutted by Camera To Print: Select an image on MR monitor, press print button at MR monitor,

press acquire button at camera keypad Note: in case the image quality matching between monitor and film is not ok, into MIM Kpad, Menu, Imaging Options set: TFT=C3b5ax4.w87,Dmax=280,Contrast =9 MIM200 Setup: n on Configure, Network: n Computer Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config., Input, Direct Connect, Config.Add, Digital, Qual=Esaote Artoscan: n Board/Channel=Digital Board 1 Channel 1, Logical Name= esamr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=10, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On

Keypad

Kodak MIM 200


Fiber Cable

Fiber Cable

3M8700DryView





Data Cable 37-pin



n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination= 8700, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:

n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=9 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= Pmsv3k.w87, Auto Study=Off, Console=On, Annotation=Off






Requirements: Artoscan-C v7.3B, C-scan v7.3B, Escan XQ v3.1B Requirements: MIM200 v6.1, 8100 v2.4.1 Note: Image Data not lutted by MR, lutted by Camera To Print: Select an image on MR monitor, press print button at MR monitor,

press acquire button at camera keypad Note: in case the image quality matching between monitor and film is not ok, into MIM Kpad, Menu, Imaging Options set: TFT=C3b5ax4.w87,Dmax=280,Contrast =9 MIM200 Setup: n on Configure, Network:


n on Config., Input, Direct Connect, Config.Add, Digital, Qual=Esaote Artoscan: n Board/Channel=Digital Board 1 Channel 1, Logical Name= esamr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=10, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:

n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

KeypadEsaote MRWinNT platform- Artoscan-C- C-scan- Escan

Kodak MIM 200



Control 9-pin

Data 37 pin

RS4229-pole Plug

Kodak DryView 8100


Data Cable 37-pinRS422 37-to-50 pinDigital Adaptor Cable



n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination= 8100, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=9 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= Pmsb.w87, Auto Study=Off, Console=On, Annotation=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even



Artoscan-C/C-scan/Escan via video/keypad with Kodak DryView 8700 LASER IMAGER / Plus

(see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ)

EVEIB with PLL

Fiber Cable

Fiber Cable

UKEIB

Keypad

Video OUT

Keypad

Video Cable


Kodak DryView 8700 Plus3M 8700 DryView

Requirements: Artoscan-C v7.3B, C-scan v7.3B, Escan XQ v3.1B, 8700 v1.34 Important: for this connection an Enhanced VEIB is required Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras Note: Image Data not lutted by MR, lutted by Camera To Print: Select an image on MR monitor, press print button at MR monitor, press acquire button at camera keypad 8700 Plus Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center n on COMM Menu: 969 Default n on IMAGE Menu: TFT=PMSV3K, Dmax=3.00, C=9, D=14 n on SYSTEM Menu: Interface=Enhanced VEIB, Memory Management=Best Fit n on EIB Menu:

n Vert.Del.=78, Image Lines=512, Horiz.Del.=377, Horiz.Act.=510 n Clock Delay=9, Fine Pixel Delay=123, Black Level=232, Digital Gain=67 n Pixel Clock Freq.=100, Horiz.Freq.=32-64, Double Gain=0.5-1, Port=0 n Passes=32, Window Width=7, Retries=3, Video Input=Standard Video n Clock Range=>50, Clocks per Line=1682, Non-Interlaced, Odd n Advanced ?=No,Vert.Sync Det.=don’t care,Black Level W.=don’t care



Artoscan-C/C-scan/Escan via video/keypad with Kodak DryView 8100 LASER IMAGER

Requirements: Artoscan-C v7.1A, C-scan v7.1A, Escan v3.0, 8100 v2.4.1 Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=10, P1,…,P6=0

n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=13 n on IMAGE QUALITY-> TFT FILES Menu: TFT=PMSB n on LOCAL PANEL Menu: Contrast=9, Density=3.00 n on SYSTEM Menu: Acquire=Video n on VIDEO Menu: Parameters as per autosync ie aprox:

n Horiz.Freq.=79999, Frame Period=14, Vert.Total=1066, PassMode=1 n Horiz.Total=1600, Phase Delay=30, Horiz.Back Porch=364 n Image Width=492, Vert.Back Porch=750, Image Height=520 n Horiz.Sync Width=937, InterlaceMode=0 ie No, Pixel Clock=0 ie No

Keypad

DryView 8100

Image Video OUT

RS422 9-poleplug

Video Cable

Imager

Keypad UKEIB 9-to-9-pinCopper Cable

Esaote MRWindows platform- Artoscan-C- C-scan- Escan



Artoscan-C/C-scan/Escan via DICOM with Kodak DryView 8300 LASER IMAGER


Kodak DryView 8300

DICOM Network

Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, Contrast=10, Modality Group=0 MR Setup: n in Internet Explorer Menu: DICOM Config->Print->Add-> set:

n Description=DryView, Host Name=IP addr of 8300 n Port=104, Remote AE title=IMN_8300 n Printer=Kodak 8300 for MR printer profile

n To Print: open images on MR monitor and press Print Layout icon, under File/Print select Printers=DryView, set 8x10 Size, set Format eg 6 images 2 x 3, click on image to select it and press F9 to add it into film, press Print to send the Print Job to camera

8300 Setup: n on 8300 Operator Menu into Configure User set:

n Density=16, Contrast=10, Sharp/Smooth=0 i.e., Auto n on 8300 Service Menu into Configure User set:

n Modality Group=0



Artoscan-C/C-scan/Escan via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: 190 rel. 1.7.29 Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 MR Setup: n in Internet Explorer Menu: DICOM Config->Print->Add-> set:

n Description=k190, Host Name=IP addr of 190 n Port=5040, Remote AE title=190 n Printer=Kodak 190 for MR printer profile

n To Print: open images on MR monitor and press Print Layout icon, under File/Print select Printers=k190, set 14x17 Size, set Format eg 20 images 4 x 5, click on image to select it and press F9 to add it into film, press Print to send the Print Job to camera




Artoscan-C/C-scan/Escan via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /





DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers and in case of HQ by installing 969 into MR DICOM Camera Config.File

Note: Image Data not lutted by MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMS

Note: in case the image quality matching between monitor and film is not ok: - into MR DICOM Config/Print/Add set: Printer=Generic MR DICOM printer profile - into 9410/Device Setup/SCP Printers/Registered User set: TFT/ULUT=C3b5ax4.w87, Max.Density=280, Contrast Table=9 MR Setup: n in Internet Explorer Menu: DICOM Config->Print->Add-> set:

n Description=DryView, Host Name=IP addr of 9410 n Port=1024, Remote AE title=9410 n Printer=Kodak 8700 for MR printer profile



n Printer=8700, Model=8700, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None



n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87








Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=9, TFT=PMS MR Setup: n in Internet Explorer Menu: DICOM Config->Print->Add-> set:

n Description=DryView, Host Name= IP addr of 9410 n Port=1024, Remote AE title= 9410 n Printer=Kodak 8500 for MR printer profile


Note: in case the image quality matching between monitor and film is not ok: - into MR DICOM Config/Print/Add set: Printer=Generic MR DICOM printer profile - into 9410/Device Setup/SCP Printers/Registered User set: TFT/ULUT=C3b5ax4.w87, Max.Density=280, Contrast Table=9 9410 Setup: n on Device Setup, LOCAL PRINTERS:

n Printer=8500, Model=8500, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831




DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable



n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87

n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8500, AE Title=9410, Port= 1024, Max Associations= 5

n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8500, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0








DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: 9410 v1.6, 8100 v2.4.1 Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=9, TFT=PMSB

MR Setup: n in Internet Explorer Menu: DICOM Config->Print->Add-> set:



Note: in case the image quality matching between monitor and film is not ok: - into MR DICOM Config/Print/Add set: Printer=Generic MR DICOM printer profile - into 9410/Device Setup/SCP Printers/Registered User set: TFT/ULUT=C3b5ax4.w87, Max.Density=280, Contrast Table=9 9410 Setup:


on Device Setup, SCP PRINTERS, Current Providers:



n Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users:

n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0








DICOM Network

Control 9 pin

Data 37 pin


Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B

Note: Image Data not lutted by MR, lutted by Camera in this case use Dmax=300, C=10, TFT=u1_109b (i.e., mod.group=0)

MR Setup: n in Internet Explorer Menu: DICOM Config->Print->Add-> set:






n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low



n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No, Print Always=Yes n Contrast Test Mode=No, Contrast Test Mode Density=0







Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin


Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=5, TFT=Contrast Group=1 MR Setup: n in Internet Explorer Menu: DICOM Config->Print->Add-> set:








n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=5, Max.Density=300 n Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Gamma Table=Linear in Transmittance, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0







Artoscan-C/C-scan/Escan via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: MIM 200 v6.1, KELI 160 v7.2 Note: Image Data not lutted by MR, lutted by Camera


n Description=k160, Host Name= IP addr of MIM200 n Port=5040, Remote AE title=160 n Printer=Kodak 160 for MR printer profile





n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On


Kodak MIM 200

DICOM Network


Kodak 160 camera



n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Interpolation=Cubic, Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None (Always=N) n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: Image Data not lutted by MR, lutted by Camera







n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On

Esaote MR- Artoscan- Escan

Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 2180 camera



n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7







Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: Image Data not lutted by MR, lutted by Camera







n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On


Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 1120 camera



n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=Black (Always=N) n Interpolation=Cubic, Border Dmax=3.99 n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off






Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: MIM 200 v6.1, DV8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by MR, lutted by Camera


n Description=DryView, Host Name= IP addr of MIM200 n Port=5040, Remote AE title=8200 n Printer=Kodak 8200 for MR printer profile


Note: in case the image quality matching between monitor and film is not ok: - into MR DICOM Config/Print/Add set: Printer=Generic MR DICOM printer profile - into MIM200/SCP Services set: TFT/ULUT=C3b5ax4.w87, Image Dmax=280, Contrast =9 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:


Kodak MIM 200

DICOM Network


Kodak DryView 8200










Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination and in case of HQ by installing 969 into MR DICOM Camera Config.File

Note: Image Data not lutted by MR, lutted by Camera


n Description=DryView, Host Name= IP addr of MIM200 n Port=5040, Remote AE title= 8700 n Printer=Kodak 8700 for MR printer profile



n Node Name=MIM, IPAddr=accordingly




Fiber Cable

Kodak MIM 200



n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:

n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N)

n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into MIM200 Destination Note: Image Data not lutted by MR, lutted by Camera




Note: in case the image quality matching between monitor and film is not ok: - into MR DICOM Config/Print/Add set: Printer=Generic MR DICOM printer profile - into MIM200/SCP Services set: TFT/ULUT=C3b5ax4.w87, Image Dmax=280, Contrast =9 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:




Fiber Cable

Kodak MIM 200



n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set: n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=11INx14IN (Always=N) n Negotiate Color Print=Off 8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Disable Even, Timeout=60





Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=9, TFT=PMSB MR Setup: n in Internet Explorer Menu: DICOM Config->Print->Add-> set:






n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32

Kodak DryView 8100

DICOM Network


Data 37-pin

RS4229-pole Plug


Kodak MIM 200



n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7








Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=10, TFT= u1_109s (ie mod.group=0) MR Setup: n in Internet Explorer Menu: DICOM Config->Print->Add-> set:





n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On

Kodak DryView 8300

DICOM Network

Control 9 pin

Data 37 pin



Kodak MIM 200



n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify:

n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=0 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off




Artoscan-C/C-scan/Escan via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=5, TFT=Contrast Group=1 MR Setup: n in Internet Explorer Menu: DICOM Config->Print->Add-> set: n Description=DryView, Host Name= IP addr of MIM200 n Port=5040, Remote AE title= 8610 n Printer=Kodak 8600 for MR printer profile n To Print: open images on MR monitor and press Print Layout icon,

under File/Print select Printers=DryView, set 8x10 Size, set Format eg 6 images 2 x 3, click on image to select it and press F9 to add it into film, press Print to send the Print Job to camera

MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even


Kodak DryView 8610

DICOM Network

Control 9 pin

Data 37 pin


Kodak MIM 200



n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=upmsv3kp.w8u (Always=N), Contrast (dry)=5 (Always=N) n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=mr n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:

n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5)






Requirements: Artoscan-C v7.3BSP2, C-scan v7.3BSP2, Escan XQ v8.0A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=9, TFT=PMSB MR Setup: n in Menu: DICOM Config->Print->Add-> set:

n Description=DryView, Host Name= IP addr of 8900 n Port=5040, Remote AE title= 8900 n Printer=eg Kodak 8200 for MR printer profile

n To Print: in Menu Print set 14x17 Size, eg 20 images (ie Format=20:1), Select images on MR monitor and press print button at MR monitor

Note: in case the image quality matching between monitor and film is not ok: - into MR DICOM Config/Print/Add set: Printer=Generic MR DICOM printer profile - into 8900/Configuration/DICOM SCP/SCP Services set: TFT/ULUT=C3b5ax4.w87, Image Dmax=280, Contrast =9 8900 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any


DICOM Network

Kodak DryView 8900



n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Pmsb.w87 (Always=N), Contrast=9 (Always=N) n Smoothing Type=2 (Always= N), Image Polarity (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=mr




Requirements: Artoscan-C v7.3B, C-scan v7.3B, Escan XQ v3.1B Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=9, TFT=PMSB MR Setup: n in Menu: DICOM Config->Print->Add-> set:

n Description=DryView, Host Name= IP addr of 8150 n Port=5040, Remote AE title=DV8150 n Printer=eg Kodak 8200 for MR printer profile


Note: in case the image quality matching between monitor and film is not ok: - into MR DICOM Config/Print/Add set: Printer=Generic MR DICOM printer profile - into 8150/Configuration/DICOM SCP/SCP Services set: TFT/ULUT=C3b5ax4.w87, Image Dmax=280, Contrast =9 8150 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On


DICOM Network

Kodak DryView 8150



n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10




Artoscan-C/C-scan/Escan via DICOM with Kodak Color Medical Imager 1000

Requirements: Artoscan-C v7.3B, C-scan v7.3B, Escan XQ v3.1B Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=9, TFT=PMSV3K MR Setup: n in Menu: DICOM Config->Print->Add-> set:

n Description=DryView, Host Name= IP addr of CMI1000 n Port=5040, Remote AE title=CMI1000 n Printer=Kodak CMI 1000 for MR printer profile


CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup:





n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N)


DICOM Network

Kodak CMI 1000



n Smoothing=2 (Always=Y), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No



Esaote Ultrasounds with LASER IMAGER Products


Setup for Esaote Ultrasounds with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /











Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)(4,5) 23 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /









Esaote US via DICOM with Kodak DryView 8300 LASER IMAGER

Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=8300, Dicom Device=Kodak 8300,

AE Title=8300, IP addr=accordingly, Port=104 - on Dicom Device, Printer Setup, Select Layout:

Session: Name=Kodak 8300 6:1, Copies=1, Priority=Low, Medium=Blue, Destination=Processor

Page: Format=Standard, Orient=Portrait, Magnif=Cubic, Rows&Cols(C,R)=2,3 Size=8x10, Border=Black, Empty=Black, Max Density=not clicked

- to Print press mouse right button: Image->DICOM->Add to Print Layout Esaote US Technos v10.0 or v12.0 Setup: - on Dicom/Configuration/Print/New choose Profile=Kodak 8300 - set into Session: Copies=1, Label=Printer Value, Medium=Blue Film,

Destination=Processor, Priority=High, Color print=Off - set into Film Box: Format=STANDARD\2,3, Film Size=8INx10IN, Orientation=Portrait,

Magnification=Cubic, Trim=No, Smoothing Type=2 Density max=260, Config.Info=LUT=1,2

- set into Image Box: Polarity=Normal - set into Select Dicom Server: Name=Kodak_8300,

AE Title= 8300, IP addr=accordingly, Port=104 Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set: - Description=8300, AE Title=8300, DICOM Printer Type=Kodak_8300 - IP addr=accordingly, Port=104, Enabled=On - select created printer and into Modify Layout check: Description=Format 6:1 - Copies=1, Medium Type=Blue Film, Display Format=STANDARD\2,3

Kodak DryView 8300

DICOM Network

Esaote Ultrasounds- AU5-Technos-Megas / Caris Plus / Esatune



- Orientation=Portrait, Film Size=8INx10IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=8300, Page Layout=Format 6:1 - to print a film, select image at monitor, press button Print till layout completed 8300 Setup: n on 8300 Operator Menu into Configure User set:


n Modality Group=1



Esaote US via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers and in case of HQ by choosing 969 into Esaote DICOM Camera Config.File

Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=8700, Dicom Device=Kodak 8700,

AE Title= 9410, IP addr=accordingly, Port=1024 - on Dicom Device, Printer Setup, Select Layout:




Destination=Processor, Priority=High, Color print=Off - set into Film Box: Format=STANDARD\2,3, Film Size=14INx17IN,

Orientation=Portrait, Magnification=Cubic, Trim=No, Smoothing Type=2, Density max=260, Config.Info=LUT=Pmsv3k.w87,5


AE Title= 9410, IP addr=accordingly, Port=1024 Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup:



DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable




- into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set: - Description=8700, AE Title=9410, DICOM Printer Type=Kodak_8700 - IP addr=accordingly, Port=1024, Enabled=On - select created printer and into Modify Layout check: Description=Format 12:1 - Copies=1, Medium Type=Blue Film, Display Format=STANDARD\3,4 - Orientation=Portrait, Film Size=14INx17IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=8700, Page Layout=Format 12:1 - to print a film, select image at monitor, press button Print till layout completed 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=5, TFT/ULUT=Pmsv3k.w87 n Max.Density=260, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0






Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=8500, Dicom Device=Kodak 8500,








AE Title= 9410, IP addr=accordingly, Port=1024 Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator



DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable




- into Settings/DICOM Print/Add Printer set: - Description=8500, AE Title=9410, DICOM Printer Type=Kodak_8500 - IP addr=accordingly, Port=1024, Enabled=On - select created printer and into Modify Layout check: Description=Format 12:1 - Copies=1, Medium Type=Blue Film, Display Format=STANDARD\3,4 - Orientation=Portrait, Film Size=11INx14IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=8500, Page Layout=Format 12:1 - to print a film, select image at monitor, press button Print till layout completed 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8500, Copies=1, Contrast Table=5, TFT/ULUT=Pmsv3k.w87 n Max.Density=260, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0






Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: 9410 v1.6, 8100 v2.4.1 Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=8100, Dicom Device=Kodak 8100,


Session: Name=Kodak 8100 20:1, Copies=1, Priority=Low Medium=Blue, Destination=Processor




Orientation=Portrait, Magnification=Cubic, Trim=No, Smoothing Type=2, Density max=260, Config.Info=LUT=Pmsb.w87,5


AE Title= 9410, IP addr=accordingly, Port=1024 Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set: - Description=8100, AE Title=9410, DICOM Printer Type=Kodak_8100 - IP addr=accordingly, Port=1024, Enabled=On - select created printer and into Modify Layout check: Description=Format 12:1


DICOM Network


Data 37-pin

RS4229-pole Plug




- Copies=1, Medium Type=Blue Film, Display Format=STANDARD\3,4 - Orientation=Portrait, Film Size=14INx17IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=8100, Page Layout=Format 12:1 - to print a film, select image at monitor, press button Print till layout completed 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=5, TFT/ULUT=Pmsb.w87 n Max.Density=260, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0

n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even





Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=8300, Dicom Device=Kodak 8300,




- to Print press mouse right button: Image->DICOM->Add to Print Layout Esaote US Technos v10.0 or v12.0 Setup: - on Dicom/Configuration/Print/New choose Profile=Kodak 8300-9410-MIM200 - set into Session: Copies=1, Label=Printer Value, Medium=Blue Film,


Orientation=Portrait, Magnification=Cubic, Trim=No, Smoothing Type=2, Density max=260, Config.Info=LUT= upmsv3k.w8u,2


AE Title= 9410, IP addr=accordingly, Port=1024 Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set: - Description=8300, AE Title=9410 - DICOM Printer Type=Kodak_8300-9410-MIM200

Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin





- IP addr=accordingly, Port=1024, Enabled=On - select created printer and into Modify Layout check: Description=Format 6:1 - Copies=1, Medium Type=Blue Film, Display Format=STANDARD\2,3 - Orientation=Portrait, Film Size=8INx10IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=8300, Page Layout=Format 6:1 - to print a film, select image at monitor, press button Print till layout completed 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type =831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=2, TFT/ULUT=upmsv3k.w8u n Max.Density=260, Border=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1 n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1





Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=8610, Dicom Device=Kodak 8610,




- to Print press mouse right button: Image->DICOM->Add to Print Layout Esaote US Technos v10.0 or v12.0 Setup: - on Dicom/Configuration/Print/New choose Profile=Kodak 8600-8610 - set into Session: Copies=1, Label=Printer Value, Medium=Blue Film,


Orientation=Portrait, Magnification=Cubic, Trim=No, Smoothing Type=4, Density max=260, Config.Info=LUT=0,2


AE Title=9410, IP addr=accordingly, Port=1024 Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set: - Description=8610, AE Title=9410, DICOM Printer Type=Kodak_8600-8610

Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin





- IP addr=accordingly, Port=1024, Enabled=On - select created printer and into Modify Layout check: Description=Format 6:1 - Copies=1, Medium Type=Blue Film, Display Format=STANDARD\2,3 - Orientation=Portrait, Film Size=8INx10IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=8610, Page Layout=Format 6:1 - to print a film, select image at monitor, press button Print till layout completed 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=2, Max.Density=260 n Border Density=0, Mag.Type=8, Smoothing=4 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Gamma=Linear in Transmittance, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0







Esaote US via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: 190 rel. 1.7.29 Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=190, Dicom Device=Kodak 190,



Page: Format=Standard, Orient=Portrait, Magnif=Cubic, Rows&Cols(C,R)=4,5 Size=14x17, Border=Black, Empty=Black, Max Density=clicked, Dmax=260


Destination=Magazine, Priority=High, Color print=Off - set into Film Box: Format=STANDARD\2,3, Film Size=14INx17IN,

Orientation=Portrait, Magnif.=Cubic, Trim=No, Smoothing Type=NORMAL, Border=Black, Empty=Black, Density max=260, Config.Info=CS435\CN0\PD1.2


AE Title=190, IP addr=accordingly, Port=5040 - to Print press mouse right button: Image->DICOM->Add to Print Layout Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set: - Description=190, AE Title=190, DICOM Printer Type=Kodak_190 - IP addr=accordingly, Port=5040, Enabled=On - select created printer and into Modify Layout check: Description=Format 12:1 - Copies=1, Medium Type=Blue Film, Display Format=STANDARD\3,4

DICOM Network

Kodak 190 cameraEsaote Ultrasounds- AU5-Technos-Megas / Caris Plus / Esatune



- Orientation=Portrait, Film Size=14INx17IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=190, Page Layout=Format 12:1 - to print a film, select image at monitor, press button Print till layout completed 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=2.60, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



Esaote US via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: MIM200 v6.1, KELI 160 v7.2 Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=160, Dicom Device=Kodak 160,






Orientation=Portrait, Magnif.=Cubic, Trim=No, Border=Black, Empty=Black Smoothing Type=NORMAL, Density max=260, Config.Info=CS435\CN0


AE Title= 160, IP addr=accordingly, Port=5040 Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set: - Description=160, AE Title=160, DICOM Printer Type=Kodak_160 - IP addr=accordingly, Port=5040, Enabled=On - select created printer and into Modify Layout check: Description=Format 12:1

Kodak MIM 200

DICOM Network

Crossed Network Cable




- Copies=1, Medium Type=Blue Film, Display Format=STANDARD\3,4 - Orientation=Portrait, Film Size=14INx17IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=160, Page Layout=Format 12:1 - to print a film, select image at monitor, press button Print till layout completed MIM200 Setup: n on Configure, Network:


n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=2.60 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 160 Setup: no modality-specific setup needed





Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: MIM200 v6.1, 2180 rel. 2.17H Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=2180, Dicom Device=Kodak 2180,






Orientation=Portrait, Magnif.=Cubic, Trim=No, Border=Black, Empty=Black Smoothing Type= NORMAL, Density max=260, Config.Info=CS435\CN0


AE Title= 2180, IP addr=accordingly, Port=5040 Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set: - Description=2180, AE Title=2180, DICOM Printer Type=Kodak_2180-1120 - IP addr=accordingly, Port=5040, Enabled=On - select created printer and into Modify Layout check: Description=Format 12:1 - Copies=1, Medium Type=Blue Film, Display Format=STANDARD\3,4

Kodak MIM 200

DICOM Network

Fiber Cable




- Orientation=Portrait, Film Size=14INx17IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=2180, Page Layout=Format 12:1 - to print a film, select image at monitor, press button Print till layout completed MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=2.60 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off, Film Output Dest=Bin 9 (Always=N)






Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=1120, Dicom Device=Kodak 1120,






Orientation=Portrait, Magnif.=Cubic, Trim=No, Border=Black, Empty=Black Smoothing Type= NORMAL, Density max=260, Config.Info=CS435\CN0


AE Title=1120, IP addr=accordingly, Port=5040 Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set: - Description=1120, AE Title=1120, DICOM Printer Type=Kodak_2180-1120 - IP addr=accordingly, Port=5040, Enabled=On - select created printer and into Modify Layout check: Description=Format 12:1 - Copies=1, Medium Type=Blue Film, Display Format=STANDARD\3,4

Kodak MIM 200

DICOM Network

Fiber Cable




- Orientation=Portrait, Film Size=14INx17IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=1120, Page Layout=Format 12:1 - to print a film, select image at monitor, press button Print till layout completed MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=2.60 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: MIM200 v6.1, DV8200 v3.5 Note: This setup is basically also valid for 25 PS computer Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=8200, Dicom Device=Kodak 8200,








AE Title=8200, IP addr=accordingly, Port=5040 Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set: - Description=8200, AE Title=8200, DICOM Printer Type=Kodak_8200

Kodak MIM 200

DICOM Network


Kodak DryView 8200




- IP addr=accordingly, Port=5040, Enabled=On - select created printer and into Modify Layout check: Description=Format 12:1 - Copies=1, Medium Type=Blue Film, Display Format=STANDARD\3,4 - Orientation=Portrait, Film Size=14INx17IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=8200, Page Layout=Format 12:1 - to print a film, select image at monitor, press button Print till layout completed MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=N), Contrast (dry)=5 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=2.60 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N)



n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination and in case of HQ by choosing 969 into Esaote DICOM Camera Config.File

Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=8700, Dicom Device=Kodak 8700,








AE Title=8700, IP addr=accordingly, Port=5040



DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable



Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set: - Description=8700, AE Title=8700, DICOM Printer Type=Kodak_8700 - IP addr=accordingly, Port=5040, Enabled=On - select created printer and into Modify Layout check: Description=Format 12:1 - Copies=1, Medium Type=Blue Film, Display Format=STANDARD\3,4 - Orientation=Portrait, Film Size=14INx17IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=8700, Page Layout=Format 12:1 - to print a film, select image at monitor, press button Print till layout completed MIM200 Setup: n on Configure, Network:




n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=N), Contrast (dry)=5 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=2.60 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N)









Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into MIM200 Destination Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=8500, Dicom Device=Kodak 8500,








AE Title= 8500, IP addr=accordingly, Port=5040 Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup:


DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable




- into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set: - Description=8500, AE Title=8500, DICOM Printer Type=Kodak_8500 - IP addr=accordingly, Port=5040, Enabled=On - select created printer and into Modify Layout check: Description=Format 12:1 - Copies=1, Medium Type=Blue Film, Display Format=STANDARD\3,4 - Orientation=Portrait, Film Size=11INx14IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=8500, Page Layout=Format 12:1 - to print a film, select image at monitor, press button Print till layout completed MIM200 Setup: n on Configure, Network:



n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=N), Contrast (dry)=5 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=2.60 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)



n Smoothing Type=2 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=11INx14IN (Always=N) n Negotiate Color Print=Off






Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=8100, Dicom Device=Kodak 8100,


Session: Name=Kodak 8100 20:1, Copies=1, Priority=Low Medium=Blue, Destination=Processor






AE Title= 8100, IP addr=accordingly, Port=5040 Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set:


DICOM Network


Data 37-pin

RS4229-pole Plug




- Description=8100, AE Title=8100, DICOM Printer Type=Kodak_8100 - IP addr=accordingly, Port=5040, Enabled=On - select created printer and into Modify Layout check: Description=Format 12:1 - Copies=1, Medium Type=Blue Film, Display Format=STANDARD\3,4 - Orientation=Portrait, Film Size=14INx17IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=8100, Page Layout=Format 12:1 - to print a film, select image at monitor, press button Print till layout completed MIM200 Setup: n on Configure, Network:




n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsb.w87 (Always=Y), Contrast (dry)=5 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=2.60 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)



n Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0






Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=8300, Dicom Device=Kodak 8300,




- to Print press mouse right button: Image->DICOM->Add to Print Layout Esaote US Technos v10.0 or v12.0 Setup: - on Dicom/Configuration/Print/New choose Profile=Kodak 8300-9410-MIM200 - set into Session: Copies=1, Label=Printer Value, Medium=Blue Film,


Orientation=Portrait, Magnification=Cubic, Trim=No, Smoothing Type=2, Density max=260, Config.Info= LUT=upmsv3k.w8u,2


AE Title= 8300, IP addr=accordingly, Port=5040 Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set: - Description=8300, AE Title=8300


DICOM Network

Control 9 pin

Data 37 pin





- DICOM Printer Type=Kodak_8300-9410-MIM200 - IP addr=accordingly, Port=5040, Enabled=On - select created printer and into Modify Layout check: Description=Format 6:1 - Copies=1, Medium Type=Blue Film, Display Format=STANDARD\2,3 - Orientation=Portrait, Film Size=8INx10IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=8300, Page Layout=Format 6:1 - to print a film, select image at monitor, press button Print till layout completed MIM200 Setup: n on Configure, Network:


n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify:

n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= upmsv3k.w8u (Always=N), Contrast (dry)=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=2.60 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N)



n Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1



Esaote US via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=8610, Dicom Device=Kodak 8610,






Orientation=Portrait, Magnification=Cubic, Trim=No, Smoothing Type=4, Density max=260, Config.Info=LUT=0,2


AE Title=8610, IP addr=accordingly, Port=5040 Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set:

Kodak DryView 8610

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin





- Description=8610, AE Title=8610, DICOM Printer Type=Kodak_8600-8610 - IP addr=accordingly, Port=5040, Enabled=On - select created printer and into Modify Layout check: Description=Format 6:1 - Copies=1, Medium Type=Blue Film, Display Format=STANDARD\2,3 - Orientation=Portrait, Film Size=8INx10IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=8610, Page Layout=Format 6:1 - to print a film, select image at monitor, press button Print till layout completed MIM200 Setup: n on Configure, Network:


n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60:

n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= upmsv3kp.w8u (Always=N), Contrast (dry)=2 (Always=N) n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=2.60 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=4 (Always=N), Border=3.99 (Always=N)



n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off








Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set:Name=8900, Dicom Device=eg Kodak 8200,




- to Print press mouse right button: Image->DICOM->Add to Print Layout Esaote US Technos v10.0 or v12.0 Setup: - on Dicom/Configuration/Print/New choose Profile=eg Kodak 8200 - set into Session: Copies=1, Label=Printer Value, Medium=Blue Film,




AE Title=8900, IP addr=accordingly, Port=5040 Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set: - Description=8900, AE Title=8900, DICOM Printer Type=Kodak_8900 - IP addr=accordingly, Port=5040, Enabled=On - select created printer and into Modify Layout check: Description=Format 12:1

DICOM Network

Kodak DryView 8900




- Copies=1, Medium Type=Blue Film, Display Format=STANDARD\3,4 - Orientation=Portrait, Film Size=14INx17IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=8900, Page Layout=Format 12:1 - to print a film, select image at monitor, press button Print till layout completed 8900 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Pmsv3k.w87 (Always=N), Contrast=5 (Always=N) n Smoothing Type=2 (Always= N), Image Polarity (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=2.60 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=us




Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Esaote US AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set:Name=8150, Dicom Device=eg Kodak 8200,

AE Title=DV8150, IPaddr=accordingly, Port=5040 - on Dicom Device, Printer Setup, Select Layout:



- to Print press mouse right button: Image->DICOM->Add to Print Layout Esaote US Technos v10.0 or v12.0 Setup: - on Dicom/Configuration/Print/New choose Profile=eg Kodak 8200 - set into Session: Copies=1, Label=Printer Value, Medium=Blue Film,




AE Title=DV8150, IP addr=accordingly, Port=5040 Esaote US Megas/Caris Plus/Esatune equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set: - Description=8150, AE Title=DV8150, DICOM Printer Type=Kodak_8200 - IP addr=accordingly, Port=5040, Enabled=On - select created printer and into Modify Layout check: Description=Format 12:1

DICOM Network

Kodak DryView 8150




- Copies=1, Medium Type=Blue Film, Display Format=STANDARD\3,4 - Orientation=Portrait, Film Size=14INx17IN, Color Capability=Grayscale - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=8150, Page Layout=Format 12:1 - to print a film, select image at monitor, press button Print till layout completed 8150 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Pmsb.w87 (Always=Y) n Contrast=5 (Always=N), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=2.60 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=us



Esaote US via DICOM with Kodak Color Medical Imager 1000

Requirements: Esaote AU5 with ImageLab v7.0 Requirements: Esaote Technos with ImageLab v10.0 or v12.0 Requirements: Esaote Megas/Caris Plus/Esatune v5.01 with Dicom Gateway v4.0 Requirements: Esaote BioPACS v5.0 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) AU5 v7.0 Setup: - on Dicom Devices, Local Printer, set: Name=CMI10000, - Dicom Device=Kodak CMI1000 (or 8300), AE Title=CMI1000, - IP addr=accordingly, Port=5040 - on Dicom Device, Printer Setup, Select Layout:

Session: Name=Kodak CMI1000 6:1, Copies=1, Priority=Low, Medium=Paper, Destination=Processor


- to Print press mouse right button: Image->DICOM->Add to Print Layout Technos v10.0 or v12.0 Setup: - on Dicom/Configuration/Print/New choose Profile=Kodak CMI-1000 - set into Session: Copies=1, Label=Printer Value, Medium=Paper, Destination=Processor,

Priority=High, Color print=On (to be selected) - set into Film Box: Format=STANDARD\2,3, Film Size=A4 (or 8_5INx11IN),

Orientation=Portrait, Magnification=Cubic, Trim=No, Smoothing Type=2 Density max=260, Config.Info=Pmsv3k.w87,5

- set into Image Box: Polarity=Normal - set into Select Dicom Server: Name=Kodak_CMI-1000,

AE Title=CMI1000, IP addr=accordingly, Port=5040 Megas/Caris Plus/Esatune/BioPACS equipped with DICOM Gateway Setup: - into DICOM Gateway log as Administrator - into Settings/DICOM Print/Add Printer set: - Description=CMI1000, AE Title=CMI1000, - DICOM Printer Type=Kodak_CMI-1000 - IP addr=accordingly, Port=5040, Enabled=On

DICOM Network

Kodak CMI 1000

Esaote Ultrasounds- AU5- Technos- Megas / Caris Plus / Esatune- BioPACS



- select created printer and into Modify Layout check: Description=Format 6:1 - Copies=1, Medium Type=Paper, Display Format=STANDARD\2,3 - Orientation=Portrait, Film Size=A4 (or 8_5INx11IN), Color Capability=Color - into US Megas/Caris Plus/Esatune press button Menu - select Peripherals and press button Enter, select Printer and press button Enter, - for all US Applications ie Cardio, Vasc., Radio, OB, TCD, N.Head select - Gateway Printer=CMI1000, Page Layout=Format 6:1 - to print a film, select image at monitor, press button Print till layout completed CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup:








Ferrania workstation RealViewer with LASER IMAGER Products


Setup for Ferrania workstation RealViewer with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) .................................... 4

n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER......................................................................... 6

n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER......................................................................... 8

n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) ................................................................................................................. 10





n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (1) ............................... 20








Ferrania RealViewer via DICOM with Kodak DryView 8300 LASER IMAGER

FerraniaRealViewer workstation

Kodak DryView 8300

DICOM Network

Requirements: Ferrania RealViewer v1.5, 8300 v4.9.1, 8300 DICOM board v3.3 Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size i.e., 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.

Possible Ferrania monitor formats: 1x1, 2x2, 3x2, 3x3, 4x3, 4x4, 5x4 Note: Ferrania Landscape is not functioning, Ferrania sends out only 8 bit images Note: Ferrania does not check the printer status i.e., does not send any Printer N-Get Ferrania RealViewer Setup: n into menu Preferences/Printers/Add: n set: Printer Name=DV8300, IPAddr=accordingly, Port=104, AEtitle=8300 n into menu Print / DICOM Print Parameters / Basic Film Session SOP Class: n set: Copies=1, Priority=LOW, Medium=BLUE FILM, Destination=PROCESSOR n into menu Print / DICOM Print Parameters / Basic Film Box SOP Class: n set: Format=STANDARD\1,1, Orient=PORTRAIT, Film Size=8INX10IN , n set: Magnif=CUBIC, Max Density=300, Config.Info=LUT=0,10, Smoothing=0, n set: Border=BLACK, Empty Image=BLACK, Trim=NO n into menu Print / DICOM Print Parameters / Grayscale Image Box SOP Class: n set: Position=1, Polarity=NORMAL n note: click Send to Printer for all above selected parameters 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=10, Sharp/Smooth=0 i.e., Auto n on 8300 Service Menu into Configure User set:

n Modality Group=0



Ferrania RealViewer via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Ferrania RealViewer workstation

DICOM Network

Kodak 190 camera

Requirements: Ferrania RealViewer rel.1.5, 190 rel. 1.7.29 Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size i.e., 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.

Possible Ferrania monitor formats: 1x1, 2x2, 3x2, 3x3, 4x3, 4x4, 5x4 Note: Ferrania Landscape is not functioning, Ferrania sends out only 8 bit images Note: Ferrania does not check the printer status i.e., does not send any Printer N-Get Ferrania RealViewer Setup: n into menu Preferences/Printers/Add: n set: Printer Name=K190, IPAddr=accordingly, Port=5040, AEtitle=190 n into menu Print / DICOM Print Parameters / Basic Film Session SOP Class: n set: Copies=1, Priority=LOW, Medium=BLUE FILM, Destination=PROCESSOR n into menu Print / DICOM Print Parameters / Basic Film Box SOP Class: n set: Format=STANDARD\1,1, Orient=PORTRAIT, Film Size=14INX17IN , n set: Magnif=CUBIC, Max Density=300, Smoothing=NORMAL n set: Border=BLACK, Empty Image=BLACK, Trim=NO n into menu Print / DICOM Print Parameters / Grayscale Image Box SOP Class: n set: Position=1, Polarity=NORMAL n note: click Send to Printer for all above selected parameters 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



Ferrania RealViewer via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ)




DICOM Network

3M 8700 DryViewFiber Cable

Fiber Cable

Requirements: Ferrania RealViewer v1.5, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and in case of 8500 by setting into Ferrania RealViewer the parameter Film Size=11INX14IN

Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size i.e., 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.

Possible Ferrania monitor formats: 1x1, 2x2, 3x2, 3x3, 4x3, 4x4, 5x4 Note: Ferrania Landscape is not functioning, Ferrania sends out only 8 bit images Note: Ferrania does not check the printer status i.e., does not send any Printer N-Get Ferrania RealViewer Setup: n into menu Preferences/Printers/Add: n set: Remote Printers Name=DV8700, IPAddr=accordingly, Port=1024, AEtitle=9410 n into menu Print / DICOM Print Parameters / Basic Film Session SOP Class: n set: Copies=1, Priority=LOW, Medium=BLUE FILM, Destination=PROCESSOR n into menu Print / DICOM Print Parameters / Basic Film Box SOP Class: n set: Format=STANDARD\1,1, Orient=PORTRAIT, Film Size=14INX17IN , n set: Magnif=CUBIC, Max Density=300, Config.Info=LUT=0,9, Smoothing=2, n set: Border=BLACK, Empty Image=BLACK, Trim=NO n into menu Print / DICOM Print Parameters / Grayscale Image Box SOP Class: n set: Position=1, Polarity=NORMAL n note: click Send to Printer for all above selected parameters














DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Ferrania RealViewer v1.5, 9410 v1.6, 8100 v2.4.1 Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size i.e., 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.




9410 Setup: on Device Setup, LOCAL PRINTERS:

n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87


on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin

COPCIL boardCopper Cable

Requirements: Ferrania RealViewer v1.5, 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size i.e., 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.







n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No, Print Always=Yes n Contrast Test Mode=No, Contrast Test Mode Density=0







Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin


Requirements: Ferrania RealViewer v1.5, 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size i.e., 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.







n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=5, Max.Density=300 n Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Gamma Table=Linear in Transmittance, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, VRTX32=1.08, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P, 2:1P, 4:1P, 6:1P n Gamma Table=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set:




Ferrania RealViewer via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: Ferrania RealViewer rel.1.5, MIM200 v6.1, KELI 160 v7.2 Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size ie 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.

Possible Ferrania monitor formats: 1x1, 2x2, 3x2, 3x3, 4x3, 4x4, 5x4 Note: Ferrania Landscape is not functioning, Ferrania sends out only 8 bit images Note: Ferrania does not check the printer status ie does not send any Printer N-Get Ferrania RealViewer Setup: n into menu Preferences/Printers/Add: n set: Printer Name=K160, IPAddr=accordingly, Port=5040, AEtitle=160 n into menu Print / DICOM Print Parameters / Basic Film Session SOP Class: n set: Copies=1, Priority=LOW, Medium=BLUE FILM, Destination=PROCESSOR n into menu Print / DICOM Print Parameters / Basic Film Box SOP Class: n set: Format=STANDARD\1,1, Orient=PORTRAIT, Film Size=14INX17IN , n set: Magnif=CUBIC, Max Density=300, Smoothing= NORMAL n set: Border=BLACK, Empty Image=BLACK, Trim=NO n into menu Print / DICOM Print Parameters / Grayscale Image Box SOP Class: n set: Position=1, Polarity=NORMAL n note: click Send to Printer for all above selected parameters MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160


Kodak MIM 200

DICOM Network


Kodak 160 camera



n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7







Requirements: Ferrania RealViewer v1.5, MIM200 v6.1, 2180 v2.17H Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size ie 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.



n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly


Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 2180 camera



n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7







Requirements: Ferrania RealViewer rel.1.5, MIM200 v6.1, 1120 v2.40/032 Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size ie 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.



n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue)


Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 1120 camera










Requirements: Ferrania RealViewer rel.1.5, MIM 200 v6.1, DV8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size ie 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.

Possible Ferrania monitor formats: 1x1, 2x2, 3x2, 3x3, 4x3, 4x4, 5x4 Note: Ferrania Landscape is not functioning, Ferrania sends out only 8 bit images Note: Ferrania does not check the printer status ie does not send any Printer N-Get Ferrania RealViewer Setup: n into menu Preferences/Printers/Add: n set: Printer Name=DV8200, IPAddr=accordingly, Port=5040, AEtitle=8200 n into menu Print / DICOM Print Parameters / Basic Film Session SOP Class: n set: Copies=1, Priority=LOW, Medium=BLUE FILM, Destination=PROCESSOR n into menu Print / DICOM Print Parameters / Basic Film Box SOP Class: n set: Format=STANDARD\1,1, Orient=PORTRAIT, Film Size=14INX17IN , n set: Magnif=CUBIC, Max Density=300, Config.Info=LUT=0,9, Smoothing=2, n set: Border=BLACK, Empty Image=BLACK, Trim=NO n into menu Print / DICOM Print Parameters / Grayscale Image Box SOP Class: n set: Position=1, Polarity=NORMAL n note: click Send to Printer for all above selected parameters MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40,


Kodak MIM 200

DICOM Network


Kodak DryView 8200



n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Blue n Media Info: Media=35x35cm, 4361x4247, 4157, Blue n Media Info: Media=11x14in, 3272x4361, 4271, Blue n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On n Formatting: Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20 n Formatting: Max Img Col=0, Max Img Row=0, n Formatting: Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.1 n SCU: Density Space= On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7







Requirements: Ferrania RealViewer v1.5 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination and in case of 8500 by setting into Ferrania RealViewer the parameter Film Size=11INX14IN

Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size ie 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.

Possible Ferrania monitor formats: 1x1, 2x2, 3x2, 3x3, 4x3, 4x4, 5x4 Note: Ferrania Landscape is not functioning, Ferrania sends out only 8 bit images Note: Ferrania does not check the printer status ie does not send any Printer N-Get Ferrania RealViewer Setup: n into menu Preferences/Printers/Add: n set: Remote Printers Name=DV8700, IPAddr=accordingly, Port=5040, AEtitle=8700 n into menu Print / DICOM Print Parameters / Basic Film Session SOP Class: n set: Copies=1, Priority=LOW, Medium=BLUE FILM, Destination=PROCESSOR n into menu Print / DICOM Print Parameters / Basic Film Box SOP Class: n set: Format=STANDARD\1,1, Orient=PORTRAIT, Film Size=14INX17IN , n set: Magnif=CUBIC, Max Density=300, Config.Info=LUT=0,9, Smoothing=2, n set: Border=BLACK, Empty Image=BLACK, Trim=NO n into menu Print / DICOM Print Parameters / Grayscale Image Box SOP Class: n set: Position=1, Polarity=NORMAL n note: click Send to Printer for all above selected parameters MIM200 Setup: n on Configure, Network:




Fiber Cable

Kodak MIM 200












Requirements: Ferrania RealViewer v1.5 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size ie 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.

Possible Ferrania monitor formats: 1x1, 2x2, 3x2, 3x3, 4x3, 4x4, 5x4 Note: Ferrania Landscape is not functioning, Ferrania sends out only 8 bit images Note: Ferrania does not check the printer status ie does not send any Printer N-Get Ferrania RealViewer Setup: n into menu Preferences/Printers/Add: n set: Remote Printers Name=DV8100, IPAddr=accordingly, Port=5040, AEtitle=8100 n into menu Print / DICOM Print Parameters / Basic Film Session SOP Class: n set: Copies=1, Priority=LOW, Medium=BLUE FILM, Destination=PROCESSOR n into menu Print / DICOM Print Parameters / Basic Film Box SOP Class: n set: Format=STANDARD\1,1, Orient=PORTRAIT, Film Size=14INX17IN , n set: Magnif=CUBIC, Max Density=300, Config.Info=LUT=0,9, Smoothing=2, n set: Border=BLACK, Empty Image=BLACK, Trim=NO n into menu Print / DICOM Print Parameters / Grayscale Image Box SOP Class: n set: Position=1, Polarity=NORMAL n note: click Send to Printer for all above selected parameters MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=8100

Kodak DryView 8100

DICOM Network


Data 37-pin

RS4229-pole Plug


Kodak MIM 200



n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7








Requirements: Ferrania RealViewer v1.5 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size ie 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.

Possible Ferrania monitor formats: 1x1, 2x2, 3x2, 3x3, 4x3, 4x4, 5x4 Note: Ferrania Landscape is not functioning, Ferrania sends out only 8 bit images Note: Ferrania does not check the printer status ie does not send any Printer N-Get Ferrania RealViewer Setup: n into menu Preferences/Printers/Add: n set: Remote Printers Name=DV8300, IPAddr=accordingly, Port=5040, AEtitle=8300 n into menu Print / DICOM Print Parameters / Basic Film Session SOP Class: n set: Copies=1, Priority=LOW, Medium=BLUE FILM, Destination=PROCESSOR n into menu Print / DICOM Print Parameters / Basic Film Box SOP Class: n set: Format=STANDARD\1,1, Orient=PORTRAIT, Film Size=8INX10IN , n set: Magnif=CUBIC, Max Density=300, Config.Info=LUT=0,10, Smoothing=0, n set: Border=BLACK, Empty Image=BLACK, Trim=NO n into menu Print / DICOM Print Parameters / Grayscale Image Box SOP Class: n set: Position=1, Polarity=NORMAL n note: click Send to Printer for all above selected parameters MIM200 Setup: n on Configure, Network:




Kodak DryView 8300

DICOM Network

Control 9 pin

Data 37 pin



Kodak MIM 200



n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5





Ferrania RealViewer via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: Ferrania RealViewer v1.5 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size ie 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.

Possible Ferrania monitor formats: 1x1, 2x2, 3x2, 3x3, 4x3, 4x4, 5x4 Note: Ferrania Landscape is not functioning, Ferrania sends out only 8 bit images Note: Ferrania does not check the printer status ie does not send any Printer N-Get Ferrania RealViewer Setup: n into menu Preferences/Printers/Add: n set: Remote Printers Name=DV8610, IPAddr=accordingly, Port=5040, AEtitle=8610 n into menu Print / DICOM Print Parameters / Basic Film Session SOP Class: n set: Copies=1, Priority=LOW, Medium=BLUE FILM, Destination=PROCESSOR n into menu Print / DICOM Print Parameters / Basic Film Box SOP Class: n set: Format=STANDARD\1,1, Orient=PORTRAIT, Film Size=8INX10IN , n set: Magnif=CUBIC, Max Density=350, Config.Info=LUT=0,5, Smoothing=1, n set: Border=BLACK, Empty Image=BLACK, Trim=NO n into menu Print / DICOM Print Parameters / Grayscale Image Box SOP Class: n set: Position=1, Polarity=NORMAL n note: click Send to Printer for all above selected parameters MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


Kodak DryView 8610

DICOM Network

Control 9 pin

Data 37 pin


Kodak MIM 200



n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=upmsv3kp.w8u (Always=N), Contrast (dry)=5 (Always=N) n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=mr n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.3, Contrast=6.P.1, Conv.Kernel=M.1.0 n (if 8600: Imager=2.4, Contrast=6.G.5B, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set:





Requirements: Ferrania RealViewer v1.5 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size ie 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.

Possible Ferrania monitor formats: 1x1, 2x2, 3x2, 3x3, 4x3, 4x4, 5x4 Note: Ferrania Landscape is not functioning, Ferrania sends out only 8 bit images Note: Ferrania does not check the printer status ie does not send any Printer N-Get Ferrania RealViewer Setup: n into menu Preferences/Printers/Add: n set:Remote Printers Name=DV8900,IPAddr=accordingly,Port=5040,AEtitle=8900 n into menu Print / DICOM Print Parameters / Basic Film Session SOP Class: n set: Copies=1, Priority=LOW, Medium=BLUE FILM, Destination=PROCESSOR n into menu Print / DICOM Print Parameters / Basic Film Box SOP Class: n set: Format=STANDARD\1,1, Orient=PORTRAIT, Film Size=14INX17IN , n set: Magnif=CUBIC, Max Density=300, Config.Info=LUT=0,9, Smoothing=2, n set: Border=BLACK, Empty Image=BLACK, Trim=NO n into menu Print / DICOM Print Parameters / Grayscale Image Box SOP Class: n set: Position=1, Polarity=NORMAL n note: click Send to Printer for all above selected parameters 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:


n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any


DICOM Network

Kodak DryView 8900



n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any


n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Pmsb.w87 (Always=N), Contrast=9 (Always=N) n Smoothing Type=2 (Always= N), Image Polarity (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ws




Requirements: Ferrania RealViewer v1.5 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size ie 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.

Possible Ferrania monitor formats: 1x1, 2x2, 3x2, 3x3, 4x3, 4x4, 5x4 Note: Ferrania Landscape is not functioning, Ferrania sends out only 8 bit images Note: Ferrania does not check the printer status ie does not send any Printer N-Get Ferrania RealViewer Setup: n into menu Preferences/Printers/Add: n set: Remote Printers Name=DV8150, IPAddr=accordingly, Port=5040, AEtitle=DV8150 n into menu Print / DICOM Print Parameters / Basic Film Session SOP Class: n set: Copies=1, Priority=LOW, Medium=BLUE FILM, Destination=PROCESSOR n into menu Print / DICOM Print Parameters / Basic Film Box SOP Class: n set: Format=STANDARD\1,1, Orient=PORTRAIT, Film Size=14INX17IN , n set: Magnif=CUBIC, Max Density=300, Config.Info=LUT=0,9, Smoothing=2, n set: Border=BLACK, Empty Image=BLACK, Trim=NO n into menu Print / DICOM Print Parameters / Grayscale Image Box SOP Class: n set: Position=1, Polarity=NORMAL n note: click Send to Printer for all above selected parameters 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:


n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any


DICOM Network

Kodak DryView 8150







Ferrania RealViewer via DICOM with Kodak Color Medical Imager 1000

Requirements: Ferrania RealViewer v1.5 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: Ferrania RealViewer workstation sends to camera what displayed on monitor. Max Ferrania image size is therefore max Ferrania monitor size ie 1k x 1.5k Note: to change format on Ferrania monitor uses CT/MRI Matrix button.

Possible Ferrania monitor formats: 1x1, 2x2, 3x2, 3x3, 4x3, 4x4, 5x4 Note: Ferrania Landscape is not functioning, Ferrania sends out only 8 bit images Note: Ferrania does not check the printer status ie does not send any Printer N-Get Ferrania RealViewer Setup: n into menu Preferences/Printers/Add: n set: Remote Printers Name=CMI1000, IPAddr=accordingly, Port=5040,

AEtitle=CMI1000 n into menu Print / DICOM Print Parameters / Basic Film Session SOP Class: n set: Copies=1, Priority=LOW, Medium=BLUE FILM, Destination=PROCESSOR n into menu Print / DICOM Print Parameters / Basic Film Box SOP Class: n set: Format=STANDARD\1,1, Orient=PORTRAIT, Film Size=8INX10IN , n set: Magnif=CUBIC, Max Density=300, Config.Info=LUT=0,9, Smoothing=2, n set: Border=BLACK, Empty Image=BLACK, Trim=NO n into menu Print / DICOM Print Parameters / Grayscale Image Box SOP Class: n set: Position=1, Polarity=NORMAL n note: click Send to Printer for all above selected parameters CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP


DICOM Network

Kodak CMI 1000



n under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm





Specific Setup Manual for a given OEM Modality via DICOM with Kodak cameras


Specific Setup for GE Instrumentarium Dental Systems (new platform) OP100 D/OC100 D/Sigma with LASER IMAGERS OEM Data Manufacturer GE Modality Dental Systems Model OP100 D / OC100 D / Sigma sw version v6.0.0.27 Implement. Class UID 1.2.840.113999.42.6.0 Implement. Version Name CV_SC_100 Kodak Data DICOM-interface MIM internal / external as below reported DICOM-intf sw version as below reported Printer model All cameras as below reported Printer sw version as below reported What’s new: The setup of a Kodak printer for a given OEM Modality was split in 2 separate documents: - the generic Setup Catalog for Kodak Cameras - the specific Setup Manual for a given OEM Modality

************* the generic Setup Catalog for Kodak Cameras: the Setup Catalog for Kodak Cameras contains that part of a printer installation which is Generic, ie common to all DICOM connections independently from the Specific modality connected. Therefore, as first step, setup the printer as per the correspondent page of the Setup Catalog for Kodak Cameras

(ie go to the Setup Catalog doc and do that first, then come back here and finish install as per this Specific Setup Manual doc). ************ the specific Setup Manual for a given OEM Modality: the Setup Manual for a given OEM Modality contains that part of a printer installation which is Specific to that particular OEM Modality to be connected, ie the OEM console Settings and the printer Image Quality parameters. Therefore, as second and final step, setup the printer as per the indications reported here into the Setup Manual for that particular OEM Modality. Note that the Setup Manual has 2 sections ie the DryView section and the Wet section.



What’s inside this document: n OEM Modality Setup (ie how to configure,into the OEM console,the Kodak printer) 2 n DryView correspondance with Kodak Setup Catalog for DryView cameras................ 3 n Image Quality setup into MIM (or 9410) for DryView cameras ............................... 4 n More info on OEM Modality when connected to DryView cameras .............................. 5 n Wet correspondance with Kodak Setup Catalog for Wet cameras .................................. 6 n Image Quality setup into MIM (or 190) for Wet cameras ............................................... 7 n More info on OEM Modality eg Page-Mode and IQ parameters sent out by OEM ........ 8 n Miscellaneous: Deviations from Kodak Setup Catalog / Known Problems / Notes........ 9 OEM Modality Setup ie how to configure into the OEM console the Kodak printer: CliniView v6.0 Setup: - into Tools/DICOM settings/Print/Add new/ set: Printer Name=DryView, AE Title=8700, IP address=accordingly, Port=5040, Basic Grayscale Print Management=On, Basic Color Print Management=Off, (if CMI1000 Basic Grayscale Print Mng.=Off, Basic Color Print Mng.=On) Click OK For the just defined camera, select each parameter and click Edit to modify it as: Name=Image Display Format, Type=Replace if empty, Default value=1 Name=Annotation Display Format, Type=Replace if empty, Default value= Name=Film Orientation, Type=Replace if empty, Default value=PORTRAIT Name=Film Size ID, Type=Always default, Default value=14INX17IN Name=Magnification Type, Type=Replace if empty, Default value=CUBIC Name=Smoothing Type, Type=Replace if empty, Default value=11 Name=Border Density, Type=Always default, Default value=BLACK Name=Empty Image Density, Type=Always default, Default value=BLACK Name=Min Density, Type=Always default, Default value=0 Name=Max Density, Type=Replace if empty, Default value=300 Name=Trim, Type=Replace if empty, Default value=NO Name=Config.Info, Type=Replace if empty, Default value=LUT=Pmsv3k.w87,9 Name=Copies, Type=Replace if empty, Default value=1 Name=Print Priority, Type=Replace if empty, Default value=HIGH Name=Medium Type, Type=Replace if empty, Default value=BLUE FILM Name=Film Destination, Type=Always default, Default value=PROCESSOR Name=Film Session Label, Type=Replace if empty, Default value= Name=Memory Allocation, Type=Replace if empty, Default value= Name=Owner ID, Type=Replace if empty, Default value= Note: some parameters are only for Color Image Box, do not select Name=Samples per Pixel (Image Box), Type=Always default, Default value=1 Name=Photo Interpr., Type=Always default, Default value=MONOCHROME2 Name=Rows, Type=Always default, Default value=1024 Name=Columns, Type=Always default, Default value=1024 Name=Pixel Aspect Ratio, Type=Always default, Default value=1\1



Name=Bits Allocated, Type=Always default, Default value=8 Name=Bits Stored, Type=Always default, Default value=8 Name=High Bit, Type=Always default, Default value=7 Name=Pixel Representation, Type=Always default, Default value=0 Name=Magnification Type, Type=Replace if empty, Default value=CUBIC Name=Smoothing Type, Type=Replace if empty, Default value=11 Name=Config.Info, Type=Replace if empty, Default value=LUT=Pmsv3k.w87,9 Name=Image Position, Type=Replace if empty, Default value=0 Name=Polarity, Type=Always default, Default value=NORMAL Name=RequestedImageSize, Type=Replace if empty, Default value= Name=Requested Dec/Crop Behavior, Type=Replace if empty, Default value= To print an image click on printer icon or select DICOM/Print to enter Print Editor, Select either the Free Layout (for free composition) or Grid Mode (ie usual formats), check mark the images that you want to print, if you want to print in True Size select Grid Mode, only 1 Grid, Scale 1:1, click on Page Setup icon and select Size=14 x 17 inches, Type=Blue Film, Orientation=Portrait, Copies=1, select File/Print and select on which camera to print the images



DryView section: Setup for Kodak DryView cameras ie 8900, 8700, 8610, 8600, 8500, 8300, 8200, 8150, 8100, 1000 Correspondance with Kodak Setup Catalog for DryView cameras: Note: the Kodak Setup Catalog contains that part of a printer installation which is Generic, ie common to all DICOM connections independently from the Specific modality connected. Therefore, as first step, setup the printer as per the correspondent page of the Kodak Setup Catalog, and then, as second and final step, setup the Image Quality parameters as per the Setup Manual for the Specific OEM Modality here below reported. MIM (inside printer) 8900 8150 into Kodak catalog see Setup as per page

19 20

MIM sw version 5.6.b5 5.7.b8 Printer sw version Rev.E ie 2.11 1.0.2.b04 MIM external 8700, 8500 8100 8300 8610 (8600) 8200 1000 into Kodak catalog see Setup as per page

15 16 17 18 14 21

MIM sw version 6.1 6.1 6.1 6.1 6.1 2.0.b3 Printer sw version 1.34 2.4.1 3.5 2.4 (2.5) 4.9.1 1.0.b8



Image Quality setup into MIM for DryView cameras: MIM (or 9410) Parameters

8900, 8150, 8700, 8500, 8200, 8100,

1000 (see Note1 below)

8300 (see Note2 below,

confirm Y/N)

8610, 8600

TFT/ULUT (8610 Modality/Contrast Group) (Always Apply=Y/N)

Pmsv3k.w87

(Y)

u1_109s.w8u

(Y)

(gsdfaa0p.w8u) 6

Contrast (Always Apply=Y/N)

9 (Y)

10 (Y)

3 (Y)

Max.Density (Always Apply=Y/N)

300 (Y)

300 (Y)

350 (Y)

Smoothing (Always Apply=Y/N)

11 (Y)

2 (Y)

1 (Y)

Presentation ie PLUT=Y/N (not available on 9410)

N N N

8610 Convolution / Kernel Group Not available Not available 1 8610 Gamma Table Not available Not available Transmittance Note1: in particular for 8100, 8200, 8150 use TFT=Pmsb.w87.



More info on OEM Modality when connected to DryView cameras:

Works the OEM Modality in Page-Mode? (Yes/No) No Note: see Page-Mode definition and matrixes into Kodak cameras setup catalog. Are Image Data lutted by the OEM Modality, ie Linear-in-Density LUT into Camera? (Yes/No)

No

Note: Linea-in-Density LUT into Camera means eg TFT=Wrkstn2a.w87, Dmax=3.00, C=2. Which are the Image Quality parameters sent out by the OEM Modality: DICOM Parameters

Sent out by Modality (Yes/No)

Value sent out for 8900, 8150, 8700, 8500, 8200, 8100,

1000

Value sent out for 8300

Value sent out for 8610, 8600

Config. Information (LUT=TFT,Contrast)

Yes

LUT=0,9

LUT=0,10

LUT=0,3

Max. Density Yes 300 300 300 Magnification Yes CUBIC CUBIC CUBIC Smoothing Yes 11 2 1 PLUT No Illumination (PLUT) No Reflective Ambient Light (PLUT)

No



Wet section: Setup for Kodak Wet cameras ie 160, 2180, 1120, 190 Correspondance with Kodak Setup Catalog for Wet cameras: Note: the Kodak Setup Catalog contains that part of a printer installation which is Generic, ie common to all DICOM connections independently from the Specific modality connected. Therefore, as first step, setup the printer as per the correspondent page of the Kodak Setup Catalog, and then, as second and final step, setup the Image Quality parameters as per the Setup Manual for the Specific OEM Modality here below reported. 160 2180 1120 190 into Kodak catalog see Setup as per page

11 12 13 6

MIM sw version 6.1 6.1 6.1 Not present Printer sw version 7.2 2.17H 2.40 / 032 1.7.29 Note: in regards to 969 parameters use the same as per 8700 setup.



Image Quality setup into MIM (or 190) for Wet cameras: MIM (or 190) Parameters 160, 2180, 1120, 190

(see Note below) Curve Shape (Always Apply=Y/N)

3 (Y)


0 (Y)


300 (Y)

PLUT=Y/N (not available on 190)

N

Note: reported setup was tested eg for 160 and tentatively is valid also for other cameras ie 2180, 1120, 190.



More info on OEM Modality when connected to Wet cameras: Works the OEM Modality in Page-Mode? (Yes/No) No Note: see Page-Mode definition and matrixes into Kodak cameras setup catalog. Are Image Data lutted by the OEM Modality, ie Linear-in-Density LUT into Camera? (Yes/No)

No

Note: Linea-in-Density LUT into Camera means eg CurveShape=0,Dmax=3.00,Contrast=0. Which are the Image Quality parameters sent out by the OEM Modality: DICOM Parameters


Value sent out for 160, 2180, 1120,

190 Config. Information (CurveShape\Contrast)

Yes

CS435\CN0

Max. Density Yes 300 Magnification Yes CUBIC Smoothing No PLUT No Illumination (PLUT) No Reflective Ambient Light (PLUT)

No



Miscellaneous: Deviations in respect to the printer setup reported into Kodak Catalog: e.g. disable N-Event ie NeventReports=No (Always=Y) Known Problems or Limitations: The new CliniView v6.0 platform does not work with 9410 platform and with 8300 standalone ie without MIM or 9410 in front Notes:

GE Instrumentarium Dental Systems with LASER IMAGER Products


Setup for GE Instrumentarium Dental Systems (old platform) OP100 D/OC100 D/Sigma with LASER IMAGERS Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /






n Kodak DryView 8300 LASER IMAGER (incompatibility with Instrumentarium Software, does not work)


Kodak Ektascan 2180 LASER PRINTER ....................................................................... 19 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Kodak Ektascan 160 LASER IMAGER .......................................................................... 25 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (1)............... 31 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8100 LASER IMAGER (1).................................................................... 34 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /








Instrumentarium OP100 D/OC100 D/Sigma via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO

Instrumentariumdental systems:- Orthopantomograph OP100 D- Orthoceph OC100 D- Sigma detectors


DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable



Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the 9410) # Remote Print Host ; 9410 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [9410] (note: use here the same AE Title of the 9410 as just above) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=1024 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=9410 DX2=PRINT_SCP IO1=9410 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8700) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies













Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 11INX14IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes



DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable



# Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the 9410) # Remote Print Host ; 9410 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [9410] (note: use here the same AE Title of the 9410 as just above) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - into file C:\ Instrumentarium Imaging\ CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=1024 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=9410 DX2=PRINT_SCP IO1=9410 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8500) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies


n Printer=8500, Model=8500, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz



n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87








Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: 9410 v1.6, 8100 v2.4.1 Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\ Instrumentarium Imaging\CliniView \Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1



DICOM Network


Data 37-pin

RS4229-pole Plug



# Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\ Instrumentarium Imaging\CliniView \Config.CFG set: Association Attributes (note: set here the AE Title of the 9410) # Remote Print Host ; 9410 - into file C:\ Instrumentarium Imaging\ CliniView\mergeini\Mergecom.APP set: [9410] (note: use here the same AE Title of the 9410 as just above) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - into file C:\ Instrumentarium Imaging\ CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=1024 - into file C:\ WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=9410 DX2=PRINT_SCP IO1=9410 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8100) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies

9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0



n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0






Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 8INX10IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;LUT=0,10 # Smoothing Type ; 6 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2



DICOM Network

Control 9 pin

Data 37 pin




# Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the 9410) # Remote Print Host ; 9410 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [9410] (note: use here the same AE Title of the 9410 as just above) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=1024 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=9410 DX2=PRINT_SCP IO1=9410 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8300) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies












Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 8INX10IN # Magnification Type ; CUBIC # Max Density ; 350 # Configuration Information ;LUT=0,3 # Smoothing Type ; 4 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1


Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin




# Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the 9410) # Remote Print Host ; 9410 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [9410] (note: use here the same AE Title of the 9410 as just above) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=1024 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=9410 DX2=PRINT_SCP IO1=9410 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8610) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies

9410 Setup: on SCP PRINTER Menu, Current Provider, SCP Parameters:

n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=3 n Max.Density=350, Border=0, Mag.Type=8, Smoothing=4 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low



n Gamma Table=Linear in Transmittance, Contrast Group=6 n Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0


n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT= don’t care n Max.Density=350, Contrast=3, Border=0

8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n D=16, C=6, Sharp/Smooth=1 n Gamma=Xmittance, Image Size=Scale To Fit, Detector = don’t care n on 8610 Service Menu into Configure User set:




Instrumentarium OP100 D/OC100 D/Sigma via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: 190 rel. 1.7.29 Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;CS435\CN0\PD1.2 # Smoothing Type ; NORMAL # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1


DICOM Network

Kodak 190 camera



# Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the 190) # Remote Print Host ; 190 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [190] (note: use here the same AE Title of the 190 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of 190 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=190 DX2=PRINT_SCP IO1=190 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 190) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies




Instrumentarium OP100 D/OC100 D/Sigma via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;CS435\CN0\PD1.2 # Smoothing Type ; NORMAL # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2


Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 2180 camera



# Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the MIM200) # Remote Print Host ; 2180 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [2180] (note: use here the same AE Title of the MIM200 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=2180 DX2=PRINT_SCP IO1=2180 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 2180) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies

MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=KELP2180, Database Name=KELP 2180



n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7







Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;CS435\CN0\PD1.2 # Smoothing Type ; NORMAL # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2


Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 1120 camera









n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7







Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, KELI 160 v7.2 Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;CS435\CN0\PD1.2 # Smoothing Type ; NORMAL # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2


Kodak MIM 200

DICOM Network


Kodak 160 camera






n General: Log.Name=KELI 160, IPAddr=100.100.100.30,



n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7







Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO



DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable



Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the MIM200) # Remote Print Host ; 8700 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [8700] (note: use here the same AE Title of the MIM200 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=8700 DX2=PRINT_SCP IO1=8700 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8700) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies













Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera




DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable









n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set: n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7







Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024



DICOM Network


Data 37-pin

RS4229-pole Plug



# Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the MIM200) # Remote Print Host ; 8100 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [8100] (note: use here the same AE Title of the MIM200 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=8100 DX2=PRINT_SCP IO1=8100 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8100) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies






n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7








Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 8INX10IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;LUT=0,10 # Smoothing Type ; 6 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1



DICOM Network

Control 9 pin

Data 37 pin




# Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the MIM200) # Remote Print Host ; 8300 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [8300] (note: use here the same AE Title of the MIM200 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=8300 DX2=PRINT_SCP IO1=8300 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8300) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies







n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On,Slide=On,Row Symmetric=On,SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5





Instrumentarium OP100 D/OC100 D/Sigma via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 8INX10IN # Magnification Type ; CUBIC # Max Density ; 350 # Configuration Information ;LUT=0,3 # Smoothing Type ; 4 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024


Kodak DryView 8610

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin




# Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the MIM200) # Remote Print Host ; 8610 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [8610] (note: use here the same AE Title of the MIM200 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=8610 DX2=PRINT_SCP IO1=8610 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8610) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies




n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database=8610 (or 8600), Model=8610 (or 8600), Mem=32



n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000,Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= gsdfaa0p.w8u (Always=N), Contrast (dry)=3 (Always=N) n Modality Group=6, Conv.Group=1, Gamma Table=Linear in Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing=4 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=instr n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off

8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1 n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set:






Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024


Kodak MIM 200

DICOM Network


Kodak DryView 8200






n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32



n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7





Instrumentarium OP100 D/OC100 D/Sigma via DICOM with Kodak DryView 8900 LASER IMAGER

Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024


DICOM Network

Kodak DryView 8900



# Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the 8900) # Remote Print Host ; 8900 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [8900] (note: use here the same AE Title of the 8900 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of 8900 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=8900 DX2=PRINT_SCP IO1=8900 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8900) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies

8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:


n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any



n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any






Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024


DICOM Network

Kodak DryView 8150



# Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the 8150) # Remote Print Host ; DV8150 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [DV8150] (note: use here the same AE Title of the 8150 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of 8150 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=DV8150 DX2=PRINT_SCP IO1=DV8150 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8150) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:


n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any



n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10




Instrumentarium OP100 D/OC100 D/Sigma via DICOM with Kodak Color Medical Imager 1000

Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 8INX10IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1


DICOM Network

Kodak CMI 1000



# Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the CMI1000) # Remote Print Host ; CMI1000 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [CMI1000] (note: use here the same AE Title of the CMI1000 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of CMI1000 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=CMI1000 DX2=PRINT_SCP IO1=CMI1000 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg CMI1000) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP










Setup for GE Instrumentarium Dental Systems (old platform) OP100 D/OC100 D/Sigma with LASER IMAGERS Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /












Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (1)............... 31 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /











Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras




DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable



Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the 9410) # Remote Print Host ; 9410 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [9410] (note: use here the same AE Title of the 9410 as just above) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=1024 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=9410 DX2=PRINT_SCP IO1=9410 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8700) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies













Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 11INX14IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes



DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable



# Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the 9410) # Remote Print Host ; 9410 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [9410] (note: use here the same AE Title of the 9410 as just above) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - into file C:\ Instrumentarium Imaging\ CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=1024 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=9410 DX2=PRINT_SCP IO1=9410 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8500) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies


n Printer=8500, Model=8500, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz



n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87








Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: 9410 v1.6, 8100 v2.4.1 Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\ Instrumentarium Imaging\CliniView \Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1



DICOM Network


Data 37-pin

RS4229-pole Plug



# Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\ Instrumentarium Imaging\CliniView \Config.CFG set: Association Attributes (note: set here the AE Title of the 9410) # Remote Print Host ; 9410 - into file C:\ Instrumentarium Imaging\ CliniView\mergeini\Mergecom.APP set: [9410] (note: use here the same AE Title of the 9410 as just above) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - into file C:\ Instrumentarium Imaging\ CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=1024 - into file C:\ WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=9410 DX2=PRINT_SCP IO1=9410 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8100) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies

9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0



n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0






Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 8INX10IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;LUT=0,10 # Smoothing Type ; 6 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2



DICOM Network

Control 9 pin

Data 37 pin




# Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the 9410) # Remote Print Host ; 9410 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [9410] (note: use here the same AE Title of the 9410 as just above) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=1024 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=9410 DX2=PRINT_SCP IO1=9410 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8300) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies












Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 8INX10IN # Magnification Type ; CUBIC # Max Density ; 350 # Configuration Information ;LUT=0,3 # Smoothing Type ; 4 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1


Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin




# Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the 9410) # Remote Print Host ; 9410 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [9410] (note: use here the same AE Title of the 9410 as just above) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=1024 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=9410 DX2=PRINT_SCP IO1=9410 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8610) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies

9410 Setup: on SCP PRINTER Menu, Current Provider, SCP Parameters:

n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=3 n Max.Density=350, Border=0, Mag.Type=8, Smoothing=4 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low



n Gamma Table=Linear in Transmittance, Contrast Group=6 n Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0







Instrumentarium OP100 D/OC100 D/Sigma via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: 190 rel. 1.7.29 Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;CS435\CN0\PD1.2 # Smoothing Type ; NORMAL # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1


DICOM Network

Kodak 190 camera



# Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the 190) # Remote Print Host ; 190 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [190] (note: use here the same AE Title of the 190 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of 190 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=190 DX2=PRINT_SCP IO1=190 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 190) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies






Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;CS435\CN0\PD1.2 # Smoothing Type ; NORMAL # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2


Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 2180 camera









n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7







Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;CS435\CN0\PD1.2 # Smoothing Type ; NORMAL # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2


Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 1120 camera









n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7







Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, KELI 160 v7.2 Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;CS435\CN0\PD1.2 # Smoothing Type ; NORMAL # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2


Kodak MIM 200

DICOM Network


Kodak 160 camera






n General: Log.Name=KELI 160, IPAddr=100.100.100.30,



n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7







Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO



DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable
















Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera




DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable
















Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024



DICOM Network


Data 37-pin

RS4229-pole Plug



# Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the MIM200) # Remote Print Host ; 8100 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [8100] (note: use here the same AE Title of the MIM200 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=8100 DX2=PRINT_SCP IO1=8100 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8100) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies






n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7








Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 8INX10IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;LUT=0,10 # Smoothing Type ; 6 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1



DICOM Network

Control 9 pin

Data 37 pin




# Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the MIM200) # Remote Print Host ; 8300 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [8300] (note: use here the same AE Title of the MIM200 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=8300 DX2=PRINT_SCP IO1=8300 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8300) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies







n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On,Slide=On,Row Symmetric=On,SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5





Instrumentarium OP100 D/OC100 D/Sigma via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 8INX10IN # Magnification Type ; CUBIC # Max Density ; 350 # Configuration Information ;LUT=0,3 # Smoothing Type ; 4 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024


Kodak DryView 8610

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin








n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database=8610 (or 8600), Model=8610 (or 8600), Mem=32



n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000,Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= gsdfaa0p.w8u (Always=N), Contrast (dry)=3 (Always=N) n Modality Group=6, Conv.Group=1, Gamma Table=Linear in Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing=4 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=instr n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off







Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ;LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024


Kodak MIM 200

DICOM Network


Kodak DryView 8200






n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32



n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7






Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024


DICOM Network

Kodak DryView 8900



# Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the 8900) # Remote Print Host ; 8900 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [8900] (note: use here the same AE Title of the 8900 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of 8900 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=8900 DX2=PRINT_SCP IO1=8900 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8900) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies

8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:


n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any



n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any






Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024


DICOM Network

Kodak DryView 8150



# Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the 8150) # Remote Print Host ; DV8150 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [DV8150] (note: use here the same AE Title of the 8150 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of 8150 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=DV8150 DX2=PRINT_SCP IO1=DV8150 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg 8150) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:


n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any



n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10




Instrumentarium OP100 D/OC100 D/Sigma via DICOM with Kodak Color Medical Imager 1000

Requirements: Instrumentarium Cliniview platform v3.3.19 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: on Instrumentarium in general only 2 DICOM printers could be installed Instrumentarium Setup: - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 8INX10IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1


DICOM Network

Kodak CMI 1000



# Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\Instrumentarium Imaging\CliniView\Config.CFG set: Association Attributes (note: set here the AE Title of the CMI1000) # Remote Print Host ; CMI1000 - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.APP set: [CMI1000] (note: use here the same AE Title of the CMI1000 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of CMI1000 SERVICE_LIST= Print_Service_List - into file C:\Instrumentarium Imaging\CliniView\mergeini\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 - into file C:\WinNT\CliniView.ini set: [DicomPrintAE] DXCount=2 DXDefault=1 IOCount=2 IODefault=1 DX1=CMI1000 DX2=PRINT_SCP IO1=CMI1000 IO2=PRINT_SCP Note: on Instrumentarium application to print select image, select File\DICOM\Print and choose following parameters and press Print: - printer on which to print images (eg CMI1000) - Portrait or Landscape - Film Layout ie nbr of columns x nbr of rows - Nbr of Copies CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP








GE Instrumentarium Mammography Diamond with LASER IMAGER Products


Setup for GE Instrumentarium Mammography Diamond with LASER IMAGERS Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (1) ..... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (1) .................. 5 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8100 LASER IMAGER (1) ..................................................................... 8 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8300 LASER IMAGER (1) ..................................................................... 11 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (1) ............................................................................................................. 14


n Kodak Digital Science 190 MEDICAL LASER PRINTER........................................... 17 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 2180 LASER PRINTER (2)................................................................... 19 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 1120 LASER PRINTER (2)................................................................... 22 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 160 LASER IMAGER (2) ...................................................................... 25 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)(2,3).... 28 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (2,3) ................ 31 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8100 LASER IMAGER (2,3)................................................................... 34 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8300 LASER IMAGER (2,3)................................................................... 37 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (2,3)........................................................................................................... 40

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (2,3)................................................................... 43

n Kodak DryView 8900 LASER IMAGER with Mammography Accessory.......................... 46 n Kodak DryView 8150 LASER IMAGER.......................................................................... 49

1 setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.5.1. 2 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 3 setup valid also for Kodak PACS LINK 25 PRINT SERVER.



Diamond via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: Delta 32 vl.3.1 Requirements: 9410 v1.6, 8700 v1.34 Note: mammo images printed with this camera are for referral purposes only Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers Diamond Delta 32 Setup: - into file C:\D32Tact\system\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO

KodakDryView 8700 PlusKodak 9410 PACS Link

DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

GE-Instrumentarium Diamond mammo systemwith CCD-detector and Delta 32 TACT 3D sw



Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\D32Tact\system\Config.CFG set: Association Attributes (note : set here the AE Title of the 9410) # Remote Print Host ; 9410 - into file C:\D32Tact\system\Mergecom.APP set: [9410] (note : use here the same AE Title of the 9410 as just above) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - into file C:\D32Tact\system\Mergecom.PRO set: TCPIP_LISTEN_PORT=1024 Note: on GE-Instrumentarium application into Maintenance/Hardcopy at run time choose for images: - Portrait or Landscape - 1 Image (ie 1:1 format) or 6 Images (ie 6:1 format) Note: on GE-Instrumentarium application to print select image, press mouse right button, select Print Note: on GE-Instrumentarium in general only a DICOM camera could be installed Note: GE-Instrumentarium CCD spot=50 micron 9410 Setup: n on Device Setup, LOCAL PRINTERS:











Requirements: Delta 32 vl.3.1 Requirements: 9410 v1.6, 8500 v1.34 Note: mammo images printed with this camera are for referral purposes only Note: This setup is basically also valid for 8800/8500 Dual camera


KodakDryView 8500 PlusKodak 9410 PACS Link

DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable




Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\D32Tact\system\Config.CFG set: Association Attributes (note : set here the AE Title of the 9410) # Remote Print Host ; 9410 - into file C:\D32Tact\system\Mergecom.APP set: [9410] (note : use here the same AE Title of the 9410 as just above) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - into file C:\D32Tact\system\Mergecom.PRO set: TCPIP_LISTEN_PORT=1024 Note: on GE-Instrumentarium application into Maintenance/Hardcopy at run time choose for images: - Portrait or Landscape - 1 Image (ie 1:1 format) or 6 Images (ie 6:1 format) Note: on GE-Instrumentarium application to print select image, press mouse right button, select Print Note: on GE-Instrumentarium in general only a DICOM camera could be installed Note: GE-Instrumentarium CCD spot=50 micron 9410 Setup: n on Device Setup, LOCAL PRINTERS:











Requirements: Delta 32 vl.3.1 Requirements: 9410 v1.6, 8100 v2.4.1 Note: mammo images printed with this camera are for referral purposes only Diamond Delta 32 Setup: - into file C:\D32Tact\system\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0


DICOM Network


Data 37-pin

RS4229-pole Plug




# Sample Per Pixel ; 1 # Photometric Interpretation ; MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\D32Tact\system\Config.CFG set: Association Attributes (note : set here the AE Title of the 9410) # Remote Print Host ; 9410 - into file C:\D32Tact\system\Mergecom.APP set: [9410] (note : use here the same AE Title of the 9410 as just above) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - into file C:\D32Tact\system\Mergecom.PRO set: TCPIP_LISTEN_PORT=1024 Note: on GE-Instrumentarium application into Maintenance/Hardcopy at run time choose for images: - Portrait or Landscape - 1 Image (ie 1:1 format) or 6 Images (ie 6:1 format) Note: on GE-Instrumentarium application to print select image, press mouse right button, select Print Note: on GE-Instrumentarium in general only a DICOM camera could be installed Note: GE-Instrumentarium CCD spot=50 micron 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly



n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0






Requirements: Delta 32 vl.3.1 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: mammo images printed with this camera are for referral purposes only Diamond Delta 32 Setup: - into file C:\D32Tact\system\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 8INX10IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; LUT=0,10 # Smoothing Type ; 6 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1


DICOM Network

Control 9 pin

Data 37 pin





# Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\D32Tact\system\Config.CFG set: Association Attributes (note : set here the AE Title of the 9410) # Remote Print Host ; 9410 - into file C:\D32Tact\system\Mergecom.APP set: [9410] (note : use here the same AE Title of the 9410 as just above) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - into file C:\D32Tact\system\Mergecom.PRO set: TCPIP_LISTEN_PORT=1024 Note: on GE-Instrumentarium application into Maintenance/Hardcopy at run time choose for images: - Portrait or Landscape - 1 Image (ie 1:1 format) or 6 Images (ie 6:1 format) Note: on GE-Instrumentarium application to print select image, press mouse right button, select Print Note: on GE-Instrumentarium in general only a DICOM camera could be installed Note: GE-Instrumentarium CCD spot=50 micron 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u



n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=6 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No, Print Always=Yes n Contrast Test Mode=No, Contrast Test Mode Density=0






Requirements: Delta 32 vl.3.1 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Diamond Delta 32 Setup: - into file C:\D32Tact\system\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 8INX10IN # Magnification Type ; CUBIC # Max Density ; 350 # Configuration Information ; LUT=0,3 # Smoothing Type ; 4 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1

Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin





# Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\D32Tact\system\Config.CFG set: Association Attributes (note : set here the AE Title of the 9410) # Remote Print Host ; 9410 - into file C:\D32Tact\system\Mergecom.APP set: [9410] (note : use here the same AE Title of the 9410 as just above) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - into file C:\D32Tact\system\Mergecom.PRO set: TCPIP_LISTEN_PORT=1024 Note: on GE-Instrumentarium application into Maintenance/Hardcopy at run time choose for images: - Portrait or Landscape - 1 Image (ie 1:1 format) or 6 Images (ie 6:1 format) Note: on GE-Instrumentarium application to print select image, press mouse right button, select Print Note: on GE-Instrumentarium in general only a DICOM camera could be installed Note: GE-Instrumentarium CCD spot=50 micron 9410 Setup: on SCP PRINTER Menu, Current Provider, SCP Parameters:

n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=3 n Max.Density=350, Border=0, Mag.Type=8, Smoothing= 4 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Transmittance, Contrast Group=6 n Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

n on LOCAL PRINTER Menu:



n Printer Name=8610, Model=8600/8610, Output Board=Copper n Baud Rate=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12 (8 if 8600), Header/Line, Timeout=60, Transfer Rate=2 MHz






Diamond via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Requirements: Delta 32 vl.3.1 Requirements: 190 rel. 1.7.29 Note: mammo images printed with this camera are for referral purposes only Diamond Delta 32 Setup: - into file C:\D32Tact\system\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; CS435\CN0\PD1.2 # Smoothing Type ; NORMAL # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024

DICOM Network

Kodak 190 cameraGE-Instrumentarium Diamond mammo systemwith CCD-detector and Delta 32 TACT 3D sw



# Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\D32Tact\system\Config.CFG set: Association Attributes (note : set here the AE Title of the 190) # Remote Print Host ; 190 - into file C:\D32Tact\system\Mergecom.APP set: [190] (note: use here the same AE Title of the 190 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of 190 SERVICE_LIST= Print_Service_List - into file C:\D32Tact\system\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 Note: on GE-Instrumentarium application into Maintenance/Hardcopy at run time choose for images: - Portrait or Landscape - 1 Image (ie 1:1 format) or 6 Images (ie 6:1 format) Note: on GE-Instrumentarium application to print select image, press mouse right button, select Print Note: on GE-Instrumentarium in general only a DICOM camera could be installed Note: GE-Instrumentarium CCD spot=50 micron 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



Diamond via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: Delta 32 vl.3.1 Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: mammo images printed with this camera are for referral purposes only Diamond Delta 32 Setup: - into file C:\D32Tact\system\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; CS435\CN0\PD1.2 # Smoothing Type ; NORMAL # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1

Kodak MIM 200

DICOM Network

Fiber Cable




# Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\D32Tact\system\Config.CFG set: Association Attributes (note : set here the AE Title of the MIM200) # Remote Print Host ; 2180 - into file C:\D32Tact\system\Mergecom.APP set: [2180] (note: use here the same AE Title of the MIM200 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - into file C:\D32Tact\system\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 Note: on GE-Instrumentarium application into Maintenance/Hardcopy at run time choose for images: - Portrait or Landscape - 1 Image (ie 1:1 format) or 6 Images (ie 6:1 format) Note: on GE-Instrumentarium application to print select image, press mouse right button, select Print Note: on GE-Instrumentarium in general only a DICOM camera could be installed Note: GE-Instrumentarium CCD spot=50 micron MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)



n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off






Requirements: Delta 32 vl.3.1 Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: mammo images printed with this camera are for referral purposes only Diamond Delta 32 Setup: - into file C:\D32Tact\system\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; CS435\CN0\PD1.2 # Smoothing Type ; NORMAL # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1

Kodak MIM 200

DICOM Network

Fiber Cable






n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)



n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off






Requirements: Delta 32 vl.3.1 Requirements: MIM200 v6.1, KELI 160 v7.2 Note: mammo images printed with this camera are for referral purposes only Diamond Delta 32 Setup: - into file C:\D32Tact\system\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; CS435\CN0\PD1.2 # Smoothing Type ; NORMAL # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1

Kodak MIM 200

DICOM Network







n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On




n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off






Requirements: Delta 32 vl.3.1 Requirements: MIM200 v6.1, 8700 v1.34 Note: mammo images printed with this camera are for referral purposes only Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination Diamond Delta 32 Setup: - into file C:\D32Tact\system\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO


DICOM Network

3M8700DryView

Fiber Cable

Fiber Cable




Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\D32Tact\system\Config.CFG set: Association Attributes (note : set here the AE Title of the MIM200) # Remote Print Host ; 8700 - into file C:\D32Tact\system\Mergecom.APP set: [8700] (note: use here the same AE Title of the MIM200 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - into file C:\D32Tact\system\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 Note: on GE-Instrumentarium application into Maintenance/Hardcopy at run time choose for images: - Portrait or Landscape - 1 Image (ie 1:1 format) or 6 Images (ie 6:1 format) Note: on GE-Instrumentarium application to print select image, press mouse right button, select Print Note: on GE-Instrumentarium in general only a DICOM camera could be installed Note: GE-Instrumentarium CCD spot=50 micron MIM200 Setup: n on Configure, Network:













Requirements: Delta 32 vl.3.1 Requirements: MIM200 v6.1, 8500 v1.34 Note: mammo images printed with this camera are for referral purposes only Note: This setup is basically also valid for 8800/8500 Dual camera



DICOM Network

3M8700DryView

Fiber Cable

Fiber Cable




Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\D32Tact\system\Config.CFG set: Association Attributes (note : set here the AE Title of the MIM200) # Remote Print Host ; 8500 - into file C:\D32Tact\system\Mergecom.APP set: [8500] (note: use here the same AE Title of the MIM200 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - into file C:\D32Tact\system\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 Note: on GE-Instrumentarium application into Maintenance/Hardcopy at run time choose for images: - Portrait or Landscape - 1 Image (ie 1:1 format) or 6 Images (ie 6:1 format) Note: on GE-Instrumentarium application to print select image, press mouse right button, select Print Note: on GE-Instrumentarium in general only a DICOM camera could be installed Note: GE-Instrumentarium CCD spot=50 micron MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set: n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue










Requirements: Delta 32 vl.3.1 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: mammo images printed with this camera are for referral purposes only Diamond Delta 32 Setup: - into file C:\D32Tact\system\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0


DICOM Network


Data 37-pin

RS4229-pole Plug




# Sample Per Pixel ; 1 # Photometric Interpretation ; MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\D32Tact\system\Config.CFG set: Association Attributes (note : set here the AE Title of the MIM200) # Remote Print Host ; 8100 - into file C:\D32Tact\system\Mergecom.APP set: [8100] (note: use here the same AE Title of the MIM200 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - into file C:\D32Tact\system\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 Note: on GE-Instrumentarium application into Maintenance/Hardcopy at run time choose for images: - Portrait or Landscape - 1 Image (ie 1:1 format) or 6 Images (ie 6:1 format) Note: on GE-Instrumentarium application to print select image, press mouse right button, select Print Note: on GE-Instrumentarium in general only a DICOM camera could be installed Note: GE-Instrumentarium CCD spot=50 micron MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60



n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=11 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off







Requirements: Delta 32 vl.3.1 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: mammo images printed with this camera are for referral purposes only Diamond Delta 32 Setup: - into file C:\D32Tact\system\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 8INX10IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; LUT=0,10 # Smoothing Type ; 6 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1


DICOM Network

Control 9 pin

Data 37 pin





# Photometric Interpretation ;MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\D32Tact\system\Config.CFG set: Association Attributes (note : set here the AE Title of the MIM200) # Remote Print Host ; 8300 - into file C:\D32Tact\system\Mergecom.APP set: [8300] (note: use here the same AE Title of the MIM200 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - into file C:\D32Tact\system\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 Note: on GE-Instrumentarium application into Maintenance/Hardcopy at run time choose for images: - Portrait or Landscape - 1 Image (ie 1:1 format) or 6 Images (ie 6:1 format) Note: on GE-Instrumentarium application to print select image, press mouse right button, select Print Note: on GE-Instrumentarium in general only a DICOM camera could be installed Note: GE-Instrumentarium CCD spot=50 micron MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On



n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= u1_109b.w8u (Always=Y), Contrast (dry)=10 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=6 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off




Diamond via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: Delta 32 vl.3.1 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Diamond Delta 32 Setup: - into file C:\D32Tact\system\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 8INX10IN # Magnification Type ; CUBIC # Max Density ; 350 # Configuration Information ; LUT=0,3 # Smoothing Type ; 4 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2

Kodak DryView 8610

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin





# Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\D32Tact\system\Config.CFG set: Association Attributes (note : set here the AE Title of the MIM200) # Remote Print Host ; 8610 - into file C:\D32Tact\system\Mergecom.APP set: [8610] (note : use here the same AE Title of the MIM200 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - into file C:\D32Tact\system\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 Note: on GE-Instrumentarium application into Maintenance/Hardcopy at run time choose for images: - Portrait or Landscape - 1 Image (ie 1:1 format) or 6 Images (ie 6:1 format) Note: on GE-Instrumentarium application to print select image, press mouse right button, select Print Note: on GE-Instrumentarium in general only a DICOM camera could be installed Note: GE-Instrumentarium CCD spot=50 micron MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database=8610 (or 8600), Model=8610 (or 8600), Mem=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000,Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On



n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= gsdfaa0p.w8u (Always=N), Contrast (dry)=3 (Always=N) n Modality Group=6, Conv.Group=1, Gamma Table=Linear in Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing=4, Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=instr n Print Priority=Normal (Always=N), Border=Black (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off







Requirements: Delta 32 vl.3.1 Requirements: MIM 200 v6.1, DV8200 v3.5 Note: mammo images printed with this camera are for referral purposes only Diamond Setup: - into file C:\D32Tact\system\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 300 # Configuration Information ; LUT=0,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1

Kodak MIM 200

DICOM Network


Kodak DryView 8200




# Photometric Interpretation ; MONOCHROME2 # Rows ; 1024 # Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\D32Tact\system\Config.CFG set: Association Attributes (note : set here the AE Title of the MIM200) # Remote Print Host ; 8200 - into file C:\D32Tact\system\Mergecom.APP set: [8200] (note: use here the same AE Title of the MIM200 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - into file C:\D32Tact\system\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 Note: on GE-Instrumentarium application into Maintenance/Hardcopy at run time choose for images: - Portrait or Landscape - 1 Image (ie 1:1 format) or 6 Images (ie 6:1 format) Note: on GE-Instrumentarium application to print select image, press mouse right button, select Print Note: on GE-Instrumentarium in general only a DICOM camera could be installed Note: GE-Instrumentarium CCD spot=50 micron MIM200 Setup: n on Configure, Network: n Node Name=MIM , IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On



n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=11 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM , TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025



Diamond via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory

Requirements: Delta 32 vl.3.1 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Diamond Delta 32 Setup: - into file C:\D32Tact\system\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 8INX10IN # Magnification Type ; CUBIC # Max Density ; 350 # Configuration Information ; LUT=gsdfaa0p.w8u,3 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024

DICOM Network

Kodak DryView 8900




# Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\D32Tact\system\Config.CFG set: Association Attributes (note : set here the AE Title of the 8900) # Remote Print Host ; 8900 - into file C:\D32Tact\system\Mergecom.APP set: [8900] (note : use here the same AE Title of the 8900 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of 8900 SERVICE_LIST= Print_Service_List - into file C:\D32Tact\system\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 Note: on GE-Instrumentarium application into Maintenance/Hardcopy at run time choose for images: - Portrait or Landscape - 1 Image (ie 1:1 format) or 6 Images (ie 6:1 format) Note: on GE-Instrumentarium application to print select image, press mouse right button, select Print Note: on GE-Instrumentarium in general only a DICOM camera could be installed Note: GE-Instrumentarium CCD spot=50 micron 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr= accordingly n on Configuration, System, Software License: n License Status=Mammo Key is ON n on Configuration, DICOM SCP, Communications:



n Media Types: Media=8x10in, 5167x6490, 6234, Any




n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT=gsdfaa0p.w8u (Always=N), Contrast=3 (Always=N) n Smoothing Type=11 (Always=N), Image Dmin=0.00 (Always=N), n Image Dmax=3.50 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws



Diamond via DICOM with Kodak DryView 8150 LASER IMAGER

Requirements: Delta 32 vl.3.1 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Diamond Delta 32 Setup: - into file C:\D32Tact\system\Config.CFG set: (note: change here if other choice for these parameters is wished) Basic Film Session Attributes # Number of copies ; 1 # Print Priority ; HIGH # Medium Type ; BLUE FILM # Film Destination ; PROCESSOR Basic Film Box Attributes # Image Display Format ; 1 # Film Orientation ; PORTRAIT # Film Size ; 14INX17IN # Magnification Type ; CUBIC # Max Density ; 350 # Configuration Information ; LUT=Pmsb.w87,9 # Smoothing Type ; 11 # Border Density ; BLACK # Empty Image Density ; BLACK # Trim ; NO Basic Grayscale Image Box Attributes # Image Position ; 0 # Sample Per Pixel ; 1 # Photometric Interpretation ;MONOCHROME2 # Rows ; 1024

DICOM Network

Kodak DryView 8150




# Columns ; 1024 # Aspect Ratio (vertical) ; 1 # Aspect Ratio (horizontal) ; 1 # Bits Allocated ; 8 # Bits Stored ; 8 # High Bit ; 7 # Pixel Representation ; 0 # Polarity ; NORMAL - into file C:\D32Tact\system\Config.CFG set: Association Attributes (note : set here the AE Title of the 8150) # Remote Print Host ; DV8150 - into file C:\D32Tact\system\Mergecom.APP set: [DV8150] (note: use here the same AE Title of the 8150 as just above) PORT_NUMBER=5040 HOST_NAME= IP address of 8150 SERVICE_LIST= Print_Service_List - into file C:\D32Tact\system\Mergecom.PRO set: TCPIP_LISTEN_PORT=5040 Note: on GE-Instrumentarium application into Maintenance/Hardcopy at run time choose for images: - Portrait or Landscape - 1 Image (ie 1:1 format) or 6 Images (ie 6:1 format) Note: on GE-Instrumentarium application to print select image, press mouse right button, select Print Note: on GE-Instrumentarium in general only a DICOM camera could be installed Note: GE-Instrumentarium CCD spot=50 micron 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:


n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On



n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10


GE Mammography Senographe with LASER IMAGER Products


Setup for GE Mammography Senographe with LASER IMAGERS GE Senographe Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (1) ............................................................................................................. 2

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (2,3)........................................................................................................... 4

n Kodak DryView 8900 LASER IMAGER with Mammography Accessory.......................... 7

1 setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3, v1.5. 2 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 3 setup valid also for Kodak PACS LINK 25 PRINT SERVER.



GE Senographe via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: FFDM_RWS_v.10.1, ADS-v:17.2.3, DS-v:30.0, AW-v4.2_04 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Senographe Setup: common to all the 4 GE stations ie RWS, ADS, DS, AW stations: Tools Menu/Printer Management/Add: DICOM printer label=eg Kodak 8610, Host name=host name of 9410 computer eg 9410MFG01, AE Title=9410, Network address=accordingly, Port=1024, Layout 1:1, Slide=not selected, Pixel Depth=not selected, Film Size: 8x10 W=5024,H=6200, Printer pixel size=38.75, Config.Info: LUT=0,3, Dmin=not used, Dmax=350, Magnif.Type=Cubic, Smoothing=1, Trim=No, Printer memory=40 Note: to get the GE Test Pattern loaded, with the pointer on the screen background, eg at the top of the screen till a cross appears, right-click on the mouse and select Service Tools (on AW select Admin)/Install SMPTE only on GE RWS and GE AW stations: into Viewer: into Print Tools Menu/Printer Configuration: select Kodak 8610, set Copies=1, Properties: Edit Media=Blue Film, Dest.=Processor, Film Orientation=Portrait, Film Size=8x10 only on GE ADS and GE DS stations: Tools Menu/Medical Application preferences/AutoPrint: set Auto Print=On (to get film printed after image is acquired and exam is closed) select Kodak 8610, set Print Mode=Fit to Film, set Copies=1 set Printer Properties: Media=Blue Film, Dest.=Processor, Film Orientation=Portrait, Film Size=8x10 Tools Menu/Medical Application preferences/Annotations/select Kodak 8610:

GE Senographe 2000 D

Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin




set Model=eg 1 (to get Printing Annotations on film as per correspondent model) only on GE DS station (which uses PLUT): Tools Menu/Review Room Management/Add: Review Room label=eg Room1, Ambient Room Light=eg 10 cd/m^2, Light Box Light=eg 5000 cd/m^2 Tools Menu/Printer Management/Default Room: select Room1, Save and Done 9410 Setup: on SCP PRINTER Menu, Current Provider, SCP Parameters:

n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associatio ns= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= PR_hostname, SCU IPAddr=accordingly, SCP=8610 n Copies=1, Contrast Table=3, Max.Density=350 n Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma=Linear in Transmittance, Contrast Group=6, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

n on LOCAL PRINTER Menu: n Printer Name=8610, Model=8600/8610, Output Board=Copper n Baud Rate=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12 (8 if 8600), Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT= don’t care n Max.Density=350, Contrast=3, Border Density=0







GE Senographe via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: FFDM_RWS_v.10.1, ADS-v:17.2.3, DS-v:30.0, AW-v4.2_04 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Senographe Setup: common to all the 4 GE stations ie RWS, ADS, DS, AW stations: Tools Menu/Printer Management/Add: DICOM printer label=eg Kodak 8610, Host name=host name of MIM 200 computer eg MIM, AE Title=8610, Network address=accordingly, Port=5040, Layout 1:1, Slide=not selected, Pixel Depth=not selected, Film Size: 8x10 W=5024,H=6200, Printer pixel size=38.75, Config.Info: LUT=0,3, Dmin=not used, Dmax=350, Magnif.Type=Cubic, Smoothing=1, Trim=No, Printer memory=40 Note: to get the GE Test Pattern loaded, with the pointer on the screen background, eg at the top of the screen till a cross appears, right-click on the mouse and select Service Tools (on AW select Admin)/Install SMPTE only on GE RWS and GE AW stations: into Viewer: into Print Tools Menu/Printer Configuration: select Kodak 8610, set Copies=1, Properties: Edit Media=Blue Film, Dest.=Processor, Film Orientation=Portrait, Film Size=8x10 only on GE ADS and GE DS stations: Tools Menu/Medical Application preferences/AutoPrint: set Auto Print=On (to get film printed after image is acquired and exam is closed) select Kodak 8610, set Print Mode=Fit to Film, set Copies=1 set Printer Properties: Media=Blue Film, Dest.=Processor, Film Orientation=Portrait, Film Size=8x10 Tools Menu/Medical Application preferences/Annotations/select Kodak 8610:


Kodak DryView 8610

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin




set Model=eg 1 (to get Printing Annotations on film as per correspondent model) only on GE DS station (which uses PLUT): Tools Menu/Review Room Management/Add: Review Room label=eg Room1, Ambient Room Light=eg 10 cd/m^2, Light Box Light=eg 5000 cd/m^2 Tools Menu/Printer Management/Default Room: select Room1, Save and Done MIM200 Setup: n on Configure, Network:


n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set:

n General: Log.Name=8610 (or 8600) n General: Database=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=Y, ToneScaling=PerceptionLUT (Always=Y) n Contrast (dry)=3 (Always=N) n Modality Group=6 (which corresponds to TFT/ULUT=gsdfaa0p.w8u) n Conv.Group=1, Gamma Table=Linear in Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=Y), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=ge



n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off







GE Senographe via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory

Requirements: FFDM_RWS_v.10.1, ADS-v:17.2.3, DS-v:30.0, AW-v4.2_04 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Senographe Setup: common to all the 4 GE stations ie RWS, ADS, DS, AW stations: Tools Menu/Printer Management/Add: DICOM printer label=eg Kodak 8900, Host name=host name of 8900 computer eg DV8900, AE Title=8900, Network address=accordingly, Port=5040, Layout 1:1, Slide=not selected, Pixel Depth=not selected, Film Size: 8x10 W=5056,H=6368, 10x12 W=6368,H=7656 Printer pixel size=39.08, Config.Info: LUT=gsdfaa0p.w8u,3, Dmin=not used, Dmax=350, Magnif.Type=Cubic, Smoothing=15, Trim=No, Printer memory=40 Note: to get the GE Test Pattern loaded, with the pointer on the screen background, eg at the top of the screen till a cross appears, right-click on the mouse and select Service Tools (on AW select Admin)/Install SMPTE only on GE RWS and GE AW stations: into Viewer: into Print Tools Menu/Printer Configuration: select Kodak 8900, set Copies=1, Properties: Edit Media=Blue Film, Dest.=Processor, Film Orientation=Portrait, Film Size=8x10 only on GE ADS and GE DS stations: Tools Menu/Medical Application preferences/AutoPrint: set Auto Print=On (to get film printed after image is acquired and exam is closed) select Kodak 8900, set Print Mode=Fit to Film, set Copies=1 set Printer Properties: Media=Blue Film, Dest.=Processor, Film Orientation=Portrait, Film Size=8x10 Tools Menu/Medical Application preferences/Annotations/select Kodak 8900: set Model=eg 1 (to get Printing Annotations on film as per correspondent model)


DICOM Network

Kodak DryView 8900



only on GE DS station (which uses PLUT): Tools Menu/Review Room Management/Add: Review Room label=eg Room1, Ambient Room Light=eg 10 cd/m^2, Light Box Light=eg 5000 cd/m^2 Tools Menu/Printer Management/Default Room: select Room1, Save and Done 8900 Setup: n on Configuration, System, Network:


n on Configuration, System, Software License: n License Status=Mammo Key is ON



n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=Yes, Negotiate Color Print=No n TFT=gsdfaa0p.w8u (Always=N), Contrast=3 (Always=N) n Smoothing Type=15 (Always=N), Image Dmin=0.00 (Always=N), n Image Dmax=3.50 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws

GE Mammography Senovision with LASER IMAGER Products


Setup for GE Mammography Senovision with LASER IMAGERS GE Senovision Connection POINT-TO-POINT: n Kodak DryView 8300 LASER IMAGER.......................................................................... 2 n Kodak DryView 8600 LASER IMAGING SYSTEM / for Mammography ........................ 3 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 /

Kodak PACS LINK 9410 ACQUISITION SYSTEM / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography ........................ 4

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 / Kodak PACS LINK MEDICAL IMAGE MANAGER 200 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography ........................ 6

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 / Kodak DryView 8900 LASER IMAGER with Mammography Accessory.......................... 8



GE Senovision with Kodak DryView 8300 LASER IMAGER

Kodak DryView 8300


DASM/LCAM box output

RS232 25-pinControl Cable

RS422 37-pinData Cable

GE SenoVision

25-to-25 NullModem Cable

Requirements: SenoVision rel. 4.0.6, 8300 rel. 4.6 RS232 25-to-9 Host 25 pin side 2 3 7 Adaptor Cable pinout 9 pin side 4 6 1 Note: if 25-to-25 Null Modem Cable is not available,

cross pin 2 and 3 on 25-side of 25-to-9 RS232 Host Adaptor Cable GE Setup: into Service Tool, Install, Filming Install set: Laser Camera=3M_952 8300 Setup: n on 8300 Operator Menu into Configure User set:


n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=16 n Digital Interface: Parity=None, Modality Group=0



GE Senovision with Kodak DryView 8600 LASER IMAGING SYSTEM / for Mammography

Kodak DryView 8600



RS232 25-pinControl Cable

RS422 37-pinData Cable

GE SenoVision


Requirements: SenoVision rel. 4.0.6, 8600 rel. 2.4 RS232 25-to-9 Host 25 pin side 2 3 7 Adaptor Cable pinout 9 pin side 4 6 1 Note: if 25-to-25 Null Modem Cable is not available,

cross pin 2 and 3 on 25-side of 25-to-9 RS232 Host Adaptor Cable GE Setup: into Service Tool, Install, Filming Install set: Laser Camera=3M_952 8600 Setup: n on 8600 Operator Menu into Test Menu, Display Software Version, verify:

n Imager=2.4, VRTX32=1.08, Contrast=6.G. 5B, Conv.Kernel=1.0.5 n on 8600 Operator Menu into Configure User set:

n Density=16, Contrast=3, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma Table=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care




GE Senovision via ptp with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 and

MIM 200 sending via DICOM Print to Kodak PACS LINK 9410 ACQUISITION SYSTEM and

Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

RS23-to-RS42225-to-15 pinConverter Box

GE 25-pinControl Cable

GE 37-pinData Cable

Kodak MIM 200GE Senovision


Host Control 232 OUT

Image Data OUT




Control 9 pin

Data 37 pin


DICOM Network

Requirements: GE Senovision v5.0.3 Requirements: MIM200 v3.2.1, 9410 v1.3.1a, 8610 v2.1 Note: into MIM200, Config, Input, Direct Connect, Params Acq, Modify, Set: Timer=10 Note: into MIM200, Config, Destination, Add, Print, Network, Qual, 8600, Set:

SCU: Negotiate Presentation LUT=Off GE Setup: into Service Tool, Install, Filming Install set: Laser Camera=3M_952 MIM200 Setup: n on Configure, Network: n Node Name=e.g., MIM200, IPAddr=addr.of MIM200 n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config., Input, Direct Connect, Config.Add, Digital, Qual.=GE Senovision Mammo: n Board/Channel=Digital Board 1 Channel 1, Logical Name=sv, n Primary Control Type=M952/P831, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=1024, Lines=1024, Parity=Even, Timer=10, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Network, Qualified, 8600, Set:



n General: Log.Name=8610, IPAddr=addr.of 9410, n General: Database Name=8600, Model=8600, Memory=32 n Media Info: Media=8x10in, 5025x6200, 6200, Blue n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port Number=1024, AE Title=IMN_9410, Timers=100 n Supported Item: Collation=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: 1, 2, 4, 6=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=0, Min Vert Sep=6 n Formatting: Trim Width when enabled=0, Trim Width when disabled=0 n Formatting: Pixel Pitch=26.3158 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n SCU: Density Space=On, Luminance Space=On, Perception LUT =On n SCU: Negotiate Presentation LUT=Off n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n at MIM Kpad: (Ready to Store Image appears), press Menu, Destination Setup: n Select Destination=8610, Media Size Select=8x10in n at MIM Kpad: (Ready to Store Image appears), press Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=PerceptionLUT n at MIM Kpad: (Ready to Store Image appears), press Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=03, Interpolation=Cubic Spline n Image Dmax=3.50, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=gsdf6.w8u (don’t care with Negotiate Presentation LUT=Off) n Auto Study=Off, Console=On 9410 Setup: on SCP PRINTER Menu, Current Provider, SCP Parameters:

n Printer=8610, SCP AETitle=IMN_9410, Port=1024, Max.Associations=5 n on SCP PRINTER Menu, Registered User: n SCU AETitle=MIM200, SCU IPAddr=accordingly, SCP=8610 n Copies=1, Contrast Table=3, Max.Density=350 n Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Transmittance, Contrast Group=6, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

n on LOCAL PRINTER Menu: n Printer Name=8610, Model=8600/8610, Output Board=Copper n Baud Rate=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT=don’t care n Max.Density=350, Contrast=3, Border Density=0




n Imager=2.1, VRTX32=1.08, Contrast=6.P.1, Conv.Kernel=M.1.0 n on 8610 Operator Menu into Configure User set:

n Density=16, Contrast=3, Sharp/Smooth=1, Film Layout: 1:1P, 2:1P, 4:1P, 6:1P n Gamma Table=Xmittance, Image Size=Scale To Fit, Detector Size=100.00





MIM 200 sending via DICOM Print to Kodak PACS LINK MEDICAL IMAGE MANAGER 200 and

Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

Requirements: GE Senovision v5.0.3 Requirements: MIM200 v5.0, 8610 v2.3 Note: into MIM200, Config, Destination, Add, Print, Network, Qual, MIM/8610, Set:

SCU: PLUT Service=Off GE Setup: into Service Tool, Install, Filming Install set: Laser Camera=3M_952 MIM200 Setup: n on Configure, Network: n Node Name=eg MIM, IPAddr= addr.of MIM200 n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config., Input, Direct Connect, Config.Add, Digital, Qual.=GE Senovision Mammo: n Board/Channel=Digital Board 1 Channel 1, Logical Name= sv, n Mod.Name=sv, Primary Control Type= M952/P831, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=1024, Lines=1024, Parity=Even, Timer=10, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4,1200, RS422, 8, 1, Even, Mem Full=MOV n on Configure, Destination, Add, Print, Network, Qualified, MIM/8610, Set: n General: Log.Name=8610, IPAddr= addr.of MIM200,



GE 37-pinData Cable

Kodak MIM 200GE Senovision



Image Data OUT




Control 9 pin

Data 37 pin


DICOM Network



n General: Database Name=MIM/8610, Model=8610, Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port =5040, AE Title=8610, Retry=40, Response=100 n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Interpolation: Cubic Conv.2=On, Cubic Conv.3=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=26.3158 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n SCU: Luminance Space=On, Curve Shape=On, Perception LUT =On n SCU: PLUT Service=Off n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n at MIM Kpad: (Ready to Store Image appears), press Menu, Destination Setup: n Select Destination=8610, Media Size Select=8x10in n at MIM Kpad: (Ready to Store Image appears), press Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=PerceptionLUT n at MIM Kpad: (Ready to Store Image appears), press Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=1, Film Contrast=03 n Image Dmax=3.50, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= gsdfaa0p.w8u, Auto Study=Off, Console=On, Annotation=Off MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610, Set: n General: Log.Name=8610 n General: Database Name=8610, Model=8610, Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On



n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=26.3158 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= gsdfaa0p.w8u (Always=Y), Contrast (dry)=3 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n ICCProfile=Off (Always=N), Modality=OT (Always=N) n BodyPart=Default (Always=N), Modality Group=6 n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Conv.Group=1, Gamma Table=1, Smoothing Type=1 (Always=Y) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Film Output Dest=Bin 9 (Always=N) 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:

n Imager=2.3, VRTX32=1.08, Contrast=6.P.1, Conv.Kernel=M.1.0 n on 8610 Operator Menu into Configure User set:

n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P, 2:1P, 4:1P, 6:1P n Gamma Table=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care





MIM 200 sending via DICOM Print to Kodak DryView 8900 LASER IMAGER with Mammography Accessory

Requirements: GE Senovision v5.0.6 Requirements: MIM200 v6.1 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) GE Setup: into Service Tool, Install, Filming Install set: Laser Camera=3M_952 MIM200 Setup: n on Configure, Network: n Node Name=eg MIM, IPAddr= addr.of MIM200 n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input,Direct Conn,Config.Add,Digital,Qual.=GE Senovision Mammo: n Board/Channel=Digital Board 1 Channel 1, Logical Name= sv, n Mod.Name=sv, Primary Control Type= M952/P831, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=1024, Lines=1024, Parity=Even, Timer=10, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4,1200, RS422, 8, 1, Even, Mem Full=MOV n on Configure, Destination, Add, Print, Network, Qualified, 8900, Set:

n General: Log.Name=8900, IPAddr=accordingly n General: Database=8900, Model=8900, Memory=32 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040,AETitle=NER_8900,Counter=40,Response=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On



GE 37-pinData Cable

Kodak MIM 200

GE Senovision



Image Data OUT



Kodak DryView 8900

DICOM Network



n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.3 n SCU: Luminance Space= On, Variable Border Density=On n SCU: Curve Shape=On, Perception LUT =On, PLUT Service=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT

n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination= 8900, Media Size Select=8x10in

n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=15, Film Contrast=3 n Image Dmax=3.50, Trim=Off, Border=Black, Border Dmax=3.99 n Collation=Off, Auto Print=On, TFT/ULUT= gsdfaa0p.w8u, n Auto Study=Off, Console=On, Page Annotation=Off, Film Output=1

8900 Setup: n on Configuration, System, Network:



n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On



n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT=gsdfaa0p.w8u (Always=N), Contrast=3 (Always=N) n Smoothing Type=15 (Always=Y), Image Dmin=0.00 (Always=N), n Image Dmax=3.50 (Always=Y), Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=sv

GE workstation Centricity RA600 (former RADWorks) with LASER IMAGER Products


Setup for GE workstation Centricity RA600 (former RADWorks) with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) .................................... 4

n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8100 LASER IMAGER......................................................................... 6

n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8300 LASER IMAGER......................................................................... 8

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 160 LASER IMAGER .......................................................................... 10

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 2180 LASER PRINTER ....................................................................... 12

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 1120 LASER PRINTER ....................................................................... 14

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (3,4,5) / Kodak DryView 8200 LASER IMAGER......................................................................... 16

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (4,5) / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) .................................... 18

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (4,5) / Kodak DryView 8100 LASER IMAGER......................................................................... 20

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (4,5) / Kodak DryView 8300 LASER IMAGER......................................................................... 22


1 Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. 2 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER.



GE Centricity RA600 via DICOM with Kodak DryView 8300 LASER IMAGER

Requirements: Centricity RA600 v7.0 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: Image Data not lutted by GE, lutted by Camera Note: on GE, when Compose Sheet is selected, True size is dimmed Note: on GE, when True Size is selected ie Compose Sheet not selected,

the Caliper (ie scale with tics) is not printed on the film GE Setup: n on Print->Destinations-> Class=DICOM Printer set: n General: Class=DICOM Printer, Name=Kodak DryView generic, Trim Lines=Off n General: Save All Image Data=Off, Merge Series=Off n DICOM: AE Title=8300, Host Name=IP-Address of 8300 n DICOM: Port=104, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off, Use True Size=Off n DICOM: Timeout=180, Trim Support=On, Use Presentation LUT=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=0,10, Border=Black, Empty Image=Black n DICOM film: Minimum Density=20, Maximum Density=300 n DICOM film: Annotation Box: Display Format=1, Position=1 n DICOM film: Annotation Box: Format=%d %t %u n DICOM film: Advanced=Off (Max X Size, Max Y Size) n DICOM media: 8INx10IN n Layouts: 1,1; 1,2; 2,2; 2,3 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=10, Sharp/Smooth=2 n on 8300 Service Menu into Configure User set: Modality Group=0

Kodak DryView 8300

DICOM Network

GECentricity RA600workstation



GE Centricity RA600 via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Requirements: Centricity RA600 v7.0 Requirements: 190 rel. 1.7.29 Note: Image Data not lutted by GE, lutted by Camera Note: on GE, when Compose Sheet is selected, True size is dimmed Note: on GE, when True Size is selected ie Compose Sheet not selected,

the Caliper (ie scale with tics) is not printed on the film GE Setup: n on Print->Destinations-> Class=DICOM Printer set: n General: Class=DICOM Printer, Name=Kodak Wet Laser generic, Trim Lines=Off n General: Description= Kodak 2180, 1120, 190, 160 n General: Save All Image Data=Off, Merge Series=Off n DICOM: AE Title=190, Host Name=IP-Address of 190 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Session Label=AMI Print Service n DICOM: Compose Sheet=Off, BFS Print Support=Off, Use True Size=Off n DICOM: Timeout=180, Trim Support= On, Use Presentation LUT=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=Normal n DICOM film: Config Info=CS435\CN0, Border=Black, Empty=Black n DICOM film: Minimum Density=20, Maximum Density=300 n DICOM film: Annotation Box: Display Format=1, Position=1 n DICOM film: Annotation Box: Format=%d %t %u n DICOM film: Advanced=Off (Max X Size, Max Y Size) n DICOM media: 14INx17IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

DICOM Network

Kodak 190 cameraGECentricity RA600workstation



GE Centricity RA600 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: Centricity RA600 v7.0 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers

Note: Image Data not lutted by GE, lutted by Camera Note: on GE, when Compose Sheet is selected, True size is dimmed Note: on GE, when True Size is selected ie Compose Sheet not selected,

the Caliper (ie scale with tics) is not printed on the film GE Setup: n on Print->Destinations-> Class=DICOM Printer set: n General: Class=DICOM Printer, Name= Kodak DryView generic, Trim Lines=Off n General: Save All Image Data=Off, Merge Series=Off n DICOM: AE Title=9410, Host Name=IP-Address of 9410 n DICOM: Port=1024, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off, Use True Size=Off n DICOM: Timeout=180, Trim Support=On, Use Presentation LUT=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=Pmsv3k.w87,9, Border=Black, Empty=Black n DICOM film: Minimum Density=20, Maximum Density=300 n DICOM film: Annotation Box: Display Format=1, Position=1 n DICOM film: Annotation Box: Format=%d %t %u n DICOM film: Advanced=Off (Max X Size, Max Y Size) n DICOM media: 14INx17IN (11INx14IN if 8500) n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome 9410 Setup:


DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable




n on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87








Requirements: Centricity RA600 v7.0 Requirements: 9410 v1.6, 8100 v2.4.1 Note: Image Data not lutted by GE, lutted by Camera Note: on GE, when Compose Sheet is selected, True size is dimmed Note: on GE, when True Size is selected ie Compose Sheet not selected,

the Caliper (ie scale with tics) is not printed on the film GE Setup: n on Print->Destinations-> Class=DICOM Printer set: n General: Class=DICOM Printer, Name= Kodak DryView generic, Trim Lines=Off n General: Save All Image Data=Off, Merge Series=Off n DICOM: AE Title=9410, Host Name=IP-Address of 9410 n DICOM: Port=1024, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off, Use True Size=Off n DICOM: Timeout=180, Trim Support=On, Use Presentation LUT=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=Pmsv3k.w87,9, Border=Black, Empty=Black n DICOM film: Minimum Density=20, Maximum Density=300 n DICOM film: Annotation Box: Display Format=1, Position=1 n DICOM film: Annotation Box: Format=%d %t %u n DICOM film: Advanced=Off (Max X Size, Max Y Size) n DICOM media: 14INx17IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz


DICOM Network


Data 37-pin

RS4229-pole Plug




n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0






Requirements: Centricity RA600 v7.0 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: Image Data not lutted by GE, lutted by Camera Note: on GE, when Compose Sheet is selected, True size is dimmed Note: on GE, when True Size is selected ie Compose Sheet not selected,

the Caliper (ie scale with tics) is not printed on the film GE Setup: n on Print->Destinations-> Class=DICOM Printer set: n General: Class=DICOM Printer, Name= Kodak DryView generic, Trim Lines=Off n General: Save All Image Data=Off, Merge Series=Off n DICOM: AE Title=9410, Host Name=IP-Address of 9410 n DICOM: Port=1024, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off, Use True Size=Off n DICOM: Timeout=180, Trim Support=On, Use Presentation LUT=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=0,10, Border=Black, Empty Image=Black n DICOM film: Minimum Density=20, Maximum Density=300 n DICOM film: Annotation Box: Display Format=1, Position=1 n DICOM film: Annotation Box: Format=%d %t %u n DICOM film: Advanced=Off (Max X Size, Max Y Size) n DICOM media: 8INx10IN n Layouts: 1,1; 1,2; 2,2; 2,3 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome 9410 Setup: n on Device Setup, LOCAL PRINTERS:

n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz


DICOM Network

Control 9 pin

Data 37 pin





n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u


n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0




GE Centricity RA600 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: Centricity RA600 v7.0 Requirements: MIM200 v6.1, 160 v7.2 Note: Image Data not lutted by GE, lutted by Camera Note: on GE, when Compose Sheet is selected, True size is dimmed Note: on GE, when True Size is selected ie Compose Sheet not selected,

the Caliper (ie scale with tics) is not printed on the film GE Setup: n on Print->Destinations-> Class=DICOM Printer set: n General: Class=DICOM Printer, Name=Kodak Wet Laser generic, Trim Lines=Off n General: Save All Image Data=Off, Merge Series=Off n DICOM: AE Title=160, Host Name=IP-Address of MIM200 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off, Use True Size=Off n DICOM: Timeout=180, Trim Support= On, Use Presentation LUT=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=Normal n DICOM film: Config Info=CS435\CN0, Border=Black, Empty=Black n DICOM film: Minimum Density=20, Maximum Density=300 n DICOM film: Annotation Box: Display Format=1, Position=1 n DICOM film: Annotation Box: Format=%d %t %u n DICOM film: Advanced=Off (Max X Size, Max Y Size) n DICOM media: 14INx17IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:

Kodak MIM 200

DICOM Network






n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Interpolation=Cubic, Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None (Always=N) n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: Centricity RA600 v7.0 Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: Image Data not lutted by GE, lutted by Camera Note: on GE, when Compose Sheet is selected, True size is dimmed Note: on GE, when True Size is selected ie Compose Sheet not selected,

the Caliper (ie scale with tics) is not printed on the film GE Setup: n on Print->Destinations-> Class=DICOM Printer set: n General: Class=DICOM Printer, Name=Kodak Wet Laser generic, Trim Lines=Off n General: Save All Image Data=Off, Merge Series=Off n DICOM: AE Title=2180, Host Name=IP-Address of MIM200 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off, Use True Size=Off n DICOM: Timeout=180, Trim Support= On, Use Presentation LUT=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=Normal n DICOM film: Config Info=CS435\CN0, Border=Black, Empty=Black n DICOM film: Minimum Density=20, Maximum Density=300 n DICOM film: Annotation Box: Display Format=1, Position=1 n DICOM film: Annotation Box: Format=%d %t %u n DICOM film: Advanced=Off (Max X Size, Max Y Size) n DICOM media: 14INx17IN, 14INx14IN, 11INx14IN, 8INx10IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:

Kodak MIM 200

DICOM Network

Fiber Cable






n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Modality=OT (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=Black (Always=N) n Interpolation=Cubic, Border Dmax=3.99 n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off






Requirements: Centricity RA600 v7.0 Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: Image Data not lutted by GE, lutted by Camera Note: on GE, when Compose Sheet is selected, True size is dimmed Note: on GE, when True Size is selected ie Compose Sheet not selected,

the Caliper (ie scale with tics) is not printed on the film GE Setup: n on Print->Destinations-> Class=DICOM Printer set: n General: Class=DICOM Printer, Name=Kodak Wet Laser generic, Trim Lines=Off n General: Save All Image Data=Off, Merge Series=Off n DICOM: AE Title=1120, Host Name=IP-Address of MIM200 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off, Use True Size=Off n DICOM: Timeout=180, Trim Support= On, Use Presentation LUT=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=Normal n DICOM film: Config Info=CS435\CN0, Border=Black, Empty=Black n DICOM film: Minimum Density=20, Maximum Density=300 n DICOM film: Annotation Box: Display Format=1, Position=1 n DICOM film: Annotation Box: Format=%d %t %u n DICOM film: Advanced=Off (Max X Size, Max Y Size) n DICOM media: 14INx17IN, 14INx14IN, 11INx14IN, 8INx10IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:

Kodak MIM 200

DICOM Network

Fiber Cable






n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=Black (Always=N) n Interpolation=Cubic, Border Dmax=3.99 n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off






Requirements: Centricity RA600 v7.0 Requirements: MIM200 v6.1, 8200 v3.5 Note: Image Data not lutted by GE, lutted by Camera Note: on GE, when Compose Sheet is selected, True size is dimmed Note: on GE, when True Size is selected ie Compose Sheet not selected,

the Caliper (ie scale with tics) is not printed on the film GE Setup: n on Print->Destinations->Add->Class=DICOM Printer set: n General: Class=DICOM Printer, Name= Kodak DryView generic, Trim Lines=Off n General: Save All Image Data=Off, Merge Series=Off n DICOM: AE Title=8200, Host Name=IP-Address of MIM200 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=On, Use True Size=Off n DICOM: Timeout=180, Trim Support=On, Use Presentation LUT=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=Pmsv3k.w87,9, Border=Black, Empty=Black n DICOM film: Minimum Density=20, Maximum Density=300 n DICOM film: Annotation Box: Display Format=1, Position=1 n DICOM film: Annotation Box: Format=%d %t %u n DICOM film: Advanced=Off (Max X Size, Max Y Size) n DICOM media: 14INx17IN, 14INx14IN, 11INx14IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:

Kodak MIM 200

DICOM Network


Kodak DryView 8200






n at Keypad connected to MIM, press Menu, Service Menu, SCP Services: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=N), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off

8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM / SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025





Requirements: Centricity RA600 v7.0 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination

Note: Image Data not lutted by GE, lutted by Camera Note: on GE, when Compose Sheet is selected, True size is dimmed Note: on GE, when True Size is selected ie Compose Sheet not selected,

the Caliper (ie scale with tics) is not printed on the film GE Setup: n on Print->Destinations-> Class=DICOM Printer set: n General: Class=DICOM Printer, Name= Kodak DryView generic, Trim Lines=Off n General: Save All Image Data=Off, Merge Series=Off n DICOM: AE Title=8700, Host Name=IP-Address of MIM200 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off, Use True Size=Off n DICOM: Timeout=180, Trim Support=On, Use Presentation LUT=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=Pmsv3k.w87,9, Border=Black, Empty=Black n DICOM film: Minimum Density=20, Maximum Density=300 n DICOM film: Annotation Box: Display Format=1, Position=1 n DICOM film: Annotation Box: Format=%d %t %u n DICOM film: Advanced=Off (Max X Size, Max Y Size) n DICOM media: 14INx17IN (11INx14IN if 8500) n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome MIM200 Setup:


DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Kodak MIM 200




n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly



n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=N), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: Centricity RA600 v7.0 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: Image Data not lutted by GE, lutted by Camera Note: on GE, when Compose Sheet is selected, True size is dimmed Note: on GE, when True Size is selected ie Compose Sheet not selected,

the Caliper (ie scale with tics) is not printed on the film GE Setup: n on Print->Destinations-> Class=DICOM Printer set: n General: Class=DICOM Printer, Name= Kodak DryView generic, Trim Lines=Off n General: Save All Image Data=Off, Merge Series=Off n DICOM: AE Title=8100, Host Name=IP-Address of MIM200 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off, Use True Size=Off n DICOM: Timeout=180, Trim Support=On, Use Presentation LUT=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=Pmsv3k.w87,9, Border=Black, Empty=Black n DICOM film: Minimum Density=20, Maximum Density=300 n DICOM film: Annotation Box: Display Format=1, Position=1 n DICOM film: Annotation Box: Format=%d %t %u n DICOM film: Advanced=Off (Max X Size, Max Y Size) n DICOM media: 14INx17IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:

Kodak DryView 8100

DICOM Network


Data 37-pin

RS4229-pole Plug

Kodak MIM 200





n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=N), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off







Requirements: Centricity RA600 v7.0 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: Image Data not lutted by GE, lutted by Camera Note: on GE, when Compose Sheet is selected, True size is dimmed Note: on GE, when True Size is selected ie Compose Sheet not selected,

the Caliper (ie scale with tics) is not printed on the film GE Setup: n on Print->Destinations-> Class=DICOM Printer set: n General: Class=DICOM Printer, Name= Kodak DryView generic, Trim Lines=Off n General: Save All Image Data=Off, Merge Series=Off n DICOM: AE Title=8300, Host Name=IP-Address of MIM200 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off, Use True Size=Off n DICOM: Timeout=180, Trim Support=On, Use Presentation LUT=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=0,10, Border=Black, Empty Image=Black n DICOM film: Minimum Density=20, Maximum Density=300 n DICOM film: Annotation Box: Display Format=1, Position=1 n DICOM film: Annotation Box: Format=%d %t %u n DICOM film: Advanced=Off (Max X Size, Max Y Size) n DICOM media: 8INx10IN n Layouts: 1,1; 1,2; 2,2; 2,3 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome MIM200 Setup: n on Configure, Network:


n on Configure, Input, Network, Add:

Kodak DryView 8300

DICOM Network

Control 9 pin

Data 37 pin


Kodak MIM 200





n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5






Requirements: Centricity RA600 v7.0 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: Image Data not lutted by GE, lutted by Camera Note: on GE, when Compose Sheet is selected, True size is dimmed Note: on GE, when True Size is selected ie Compose Sheet not selected,

the Caliper (ie scale with tics) is not printed on the film GE Setup: n on Print->Destinations-> Class=DICOM Printer set: n General: Class=DICOM Printer, Name= Kodak DryView generic, Trim Lines=Off n General: Save All Image Data=Off, Merge Series=Off n DICOM: AE Title=8900, Host Name=IP-Address of 8900 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off, Use True Size=Off n DICOM: Timeout=180, Trim Support=On, Use Presentation LUT=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=Pmsv3k.w87,9, Border=Black, Empty=Black n DICOM film: Minimum Density=20, Maximum Density=300 n DICOM film: Annotation Box: Display Format=1, Position=1 n DICOM film: Annotation Box: Format=%d %t %u n DICOM film: Advanced=Off (Max X Size, Max Y Size) n DICOM media: 14INx17IN, 14INx14IN, 11INx14IN, 10INx12IN, 8INx10IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:


DICOM Network

Kodak DryView 8900




n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Pmsv3k.w87 (Always=N), Contrast=9 (Always=N) n Smoothing Type=2 (Always=N), Image Dmin=0.00 (Always=N), n Image Dmax=3.00 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Density Patch=No n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Sorter Bin=Bin1 (Always=N), Print Date=No, Print Time=No, n Page Nbr=No, Hosp.Name=No, Modality ID=No n Annotation Override=No, Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws




Requirements: Centricity RA600 v7.0 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: Image Data not lutted by GE, lutted by Camera Note: on GE, when Compose Sheet is selected, True size is dimmed Note: on GE, when True Size is selected ie Compose Sheet not selected,

the Caliper (ie scale with tics) is not printed on the film GE Setup: n on Print->Destinations-> Class=DICOM Printer set: n General: Class=DICOM Printer, Name=Kodak DryView generic, Trim Lines=Off n General: Description= Kodak 8900, 8700, 8500, 8200, 8150, 8100 n General: Save All Image Data=Off, Merge Series=Off n DICOM: AE Title=DV8150, Host Name=IP-Address of 8150 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Session Label=AMI Print Service n DICOM: Compose Sheet=Off, BFS Print Support=Off, Use True Size=Off n DICOM: Timeout=180, Trim Support=On, Use Presentation LUT=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=Pmsb.w87,9, Border=Black, Empty=Black n DICOM film: Minimum Density=20, Maximum Density=300 n DICOM film: Annotation Box: Display Format=1, Position=1 n DICOM film: Annotation Box: Format=%d %t %u n DICOM film: Advanced=Off (Max X Size, Max Y Size) n DICOM media: 14INx17IN, 14INx14IN, 11INx14IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:

DICOM Network

Kodak DryView 8150









GE Centricity RA600 via DICOM with Kodak Color Medical Imager 1000

Requirements: Centricity RA600 v7.0 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: Image Data not lutted by GE, lutted by Camera Note: on GE, when Compose Sheet is selected, True size is dimmed Note: on GE, when True Size is selected ie Compose Sheet not selected,

the Caliper (ie scale with tics) is not printed on the film GE Setup: n on Print->Destinations-> Class=DICOM Printer set: n General: Class=DICOM Printer, Name=Kodak DryView generic, Trim Lines=Off n General: Description= Kodak 8900, 8700, 8500, 8200, 8150, 8100 n General: Save All Image Data=Off, Merge Series=Off n DICOM: AE Title=CMI1000, Host Name=IP-Address of CMI1000 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Session Label=AMI Print Service n DICOM: Compose Sheet=Off, BFS Print Support=Off, Use True Size=Off n DICOM: Timeout=180, Trim Support=On, Use Presentation LUT=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info=LUT=Pmsv3k.w87,9, Border=Black, Empty=Black n DICOM film: Minimum Density=20, Maximum Density=300 n DICOM film: Annotation Box: Display Format=1, Position=1 n DICOM film: Annotation Box: Format=%d %t %u n DICOM film: Advanced=Off (Max X Size, Max Y Size) n DICOM media: 8INx10IN n Layouts: 1,1; 1,2; 2,2; 2,3 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Color CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040

DICOM Network


Kodak CMI 1000









IMS Mammography Biopsy Digit Mam with LASER IMAGER Products


Setup for IMS Mammography Biopsy Digit Mam with LASER IMAGERS IMS Biopsy Digit Mam Connection POINT-TO-POINT: n Kodak PACS LINK 9410 ACQUISITION SYSTEM /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual) ....................... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM /

Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) ....................... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM /

Kodak DryView 8100 LASER IMAGER.......................................................................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM /

Kodak DryView 8300 LASER IMAGER.......................................................................... 8 n Kodak PACS LINK 9410 ACQUISITION SYSTEM /

Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) .................................................................................................................. 10

n Kodak PACS LINK 9410 ACQUISITION SYSTEM / Kodak Digital Science 969 HQ LASER IMAGER ....................................................... 12



IMS Biopsy Digit Mam with Kodak PACS LINK 9410 ACQUISITION SYSTEM /


DPCCopper Cable

DPI4-to-DPC Cable

UKEIB


Host

IMS 25-pinControl Cable

IMS 37-pinData Cable

Fiber Cable

Fiber Cable

25-9 DPC-UKEIB Cable


Imager

IMS Biopsy Digit Mam 25-to-25 NullModem Cable


Image Data OUT

3M8700DryView


Requirements: IMS DigiMam platform rel. 4.2.30.10, 9410 v1.3.3, 8700 v1.24 Note: This setup is basically also valid for 8800/8700 Dual camera

by basically using the correspondent Model into 9410 Local Printers IMS Setup: n on IMS run LCAMconf.exe n into LaserCam Specs at conf, with right mouse button select Add new LCAM Specs n set Enter Prototype=3m8700ptr, LCAM Device=DASM-LCAM-3M, BITS_OUT=8 n Save all and copy file Spooler/conf/3m8700ptr/config.dat into Spooler/conf directory n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center RS232 25-to-9 Host 25 pin side 2 3 7 Adaptor Cable pinout 9 pin side 4 6 1 Note: if 25-to-25 Null Modem Cable is not available,

cross pin 2 and 3 on 25-side of 25-to-9 RS232 Host Adaptor Cable 9410 Setup:

on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet n Pixel=8, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0



n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, DPI4 Digital Menu:

n Image Data Port: Header, 8 bit, Timeout=60, Parity=None, Memory=7 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200

on Device Setup, HOST KEYPADS: n Kpad=ims, Hosp=ims, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=Pmsv3k.w87, Mem.Full =On, Image Size =On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=14x17, C=9, D=14 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=8, Header/Line, Parity=Enable Even, Port=0, Timeout=60





DPCCopper Cable

DPI4-to-DPC Cable

UKEIB


Host



Fiber Cable

Fiber Cable



Imager



Image Data OUT

3M8700Dr yVie w


Requirements: IMS DigiMam platform rel. 4.2.30.10, 9410 v1.3.3, 8500 v1.24 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers IMS Setup: n on IMS run LCAMconf.exe n into LaserCam Specs at conf, with right mouse button select Add new LCAM Specs n set Enter Prototype=3m8500ptr, LCAM Device=DASM-LCAM-3M, BITS_OUT=8 n Save all and copy file Spooler/conf/3m8500ptr/config.dat into Spooler/conf directory n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center RS232 25-to-9 Host 25 pin side 2 3 7 Adaptor Cable pinout 9 pin side 4 6 1 Note: if 25-to-25 Null Modem Cable is not available,


on Device Setup, LOCAL PRINTERS: n Printer=8500, Model=8500, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet n Pixel=8, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0



n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, DPI4 Digital Menu:


on Device Setup, HOST KEYPADS: n Kpad=ims, Hosp=ims, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8500, Film Destination=Processor, Printer1=8500(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=Pmsv3k.w87, Mem.Full =On, Image Size =On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=11x14, C=9, D=14 8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=8, Header/Line, Parity=Enable Even, Port=0, Timeout=60





DPCCopper Cable

DPI4 Cable

UKEIB


HostHost Control 232 OUT

Image Data OUT



IMS Biopsy Digit Mam

Kodak DryView 8100

Control 9-pin

Data 37 pin

DPC-to-UKEIB Cable



RS4229-pole Plug

Imager


Requirements: IMS DigiMam platform rel. 4.2.30.10, 9410 v1.3.3, 8100 v1.1.2 IMS Setup: n on IMS run LCAMconf.exe n into LaserCam Specs at conf, with right mouse button select Add new LCAM Specs n set Enter Prototype=3m8700ptr, LCAM Device=DASM-LCAM-3M, BITS_OUT=8 n Save all and copy file Spooler/conf/3m8700ptr/config.dat into Spooler/conf directory n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center RS232 25-to-9 Host 25 pin side 2 3 7 Adaptor Cable pinout 9 pin side 4 6 1 Note: if 25-to-25 Null Modem Cable is not available,



on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=60, Parity=None, Memory=7



n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200 on Device Setup, HOST KEYPADS:

n Kpad=ims, Hosp=ims, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=Pmsb.w87, Mem.Full =On, Image Size =On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=14x17, C=9, D=14 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even





DPCCopper Cable

DPI4 Cable

UKEIB



Image Data OUT




Kodak DryView 8300

Control 9-pin

Data 37 pin

DPC-to-UKEIB Cable



Imager


Requirements: IMS DigiMam platform rel. 4.2.30.10 Requirements: 9410 v1.3.3, 8300 v4.6, 8300 LUT v2.0.0 Note: since matrix of IMS is 1024, only formats 1:1, 2:1, 4:1 are printed on 8300 IMS Setup: n on IMS run LCAMconf.exe n into LaserCam Specs at conf, with right mouse button select Add new LCAM Specs n set Enter Prototype=3m8300ptr, LCAM Device=DASM-LCAM-3M, BITS_OUT=8 n Save all and copy file Spooler/conf/3m8700ptr/config.dat into Spooler/conf directory n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center RS232 25-to-9 Host 25 pin side 2 3 7 Adaptor Cable pinout 9 pin side 4 6 1 Note: if 25-to-25 Null Modem Cable is not available,


on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8300 Copper, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0



n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u on I/O CARD SETUP, DPI4 Digital Menu:


on Device Setup, HOST KEYPADS: n Kpad=ims, Hosp=ims, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8300, Film Destination=Processor, Printer1=8300(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=u1_109b.w8u, Mem.Full =On, Image Size =On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=8x10, C=10, D=16 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1





DPCCopper Cable

DPI4 Cable

UKEIB



Image Data OUT




Kodak DryView 8610

Control 9-pin

Data 37 pin

DPC-to-UKEIB Cable

Kodak 9410 PACS LinkModality ServerCOPCIL Board

Copper Cable

Imager


Kodak 9410 PACS LinkDICOM Print Server

DICOM Network Requirements: IMS DigiMam platform v4.2.30.10 Requirements: 9410 v1.3.3, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: for the 8600 this configuration could be also reduced

to 1 single 9410 which concentrates both functionalities: - the point-to-point image acquisition (i.e., Modality Server functionality) - the local printing on 8610 (or 8600) (i.e., DICOM Print Server functionality).

IMS Setup: n on IMS run LCAMconf.exe n into LaserCam Specs at conf, with right mouse button select Add new LCAM Specs n set Enter Prototype=3m8300ptr, LCAM Device=DASM-LCAM-3M, BITS_OUT=8 n Save all and copy file Spooler/conf/3m8300ptr/config.dat into Spooler/conf directory n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center RS232 25-to-9 Host 25 pin side 2 3 7 Adaptor Cable pinout 9 pin side 4 6 1 Note: if 25-to-25 Null Modem Cable is not available,

cross pin 2 and 3 on 25-side of 25-to-9 RS232 Host Adaptor Cable 9410 Modality Server Setup:

on Device Setup, SCU PRINTERS: n Printer=8610, Model=8600/8610, Port=1024, IPAddr=accordingly



n SCU AE Title=KDK_9410, SCP AE Title=9410 n LUT String Supported=Off, Annotation Supported=Off, Print Guaranteed=On n into Adv.Options: Replic.=NONE, Bilinear=NONE, Cubic=1, None=NONE n into Adv.Options: Blue=BLUE, Clear=CLEAR, None=CURRENT n Film Size=8x10, Film Type=Blue, Film Destination=Current, Contrast=3 n MinD=0, MaxD=350, Interp.Type=831 DICOM, Interp.Num=1, TFT=don’t care

on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=60, Parity=None, Memory=7 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200

on Device Setup, HOST KEYPADS: n Kpad=ims, Hosp=ims, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8610, Film Destination=Processor, Printer1=8610(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=don’t care, Mem.Full =On, Image Size =On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=8x10, C=3, D=16 9410 DICOM Print Server Setup:

n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations=5 n on SCP PRINTER Menu, Registered User: n SCU AETitle=TEST_PRINT_SCU, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=3 n Max.Density=350, Border=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Transmittance, Contrast Group=6, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0


n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT=don’t care n Max.Density=350, Contrast=3, Border=0

8610 Setup: n on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, VRTX32=1.08, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=3, Sharp/Smooth=1, Layout: 1 on 1=P n Gamma=Xmittance, Image Size=Scale To Fit, Detector =don’t care n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=127 n Digital Interface: Parity=Even, Modality Group=6, Smoothing Group=1



IMS Biopsy Digit Mam with Kodak PACS LINK 9410 ACQUISITION SYSTEM / Kodak Digital Science 969 HQ LASER IMAGER

DPCCopper Cable

DPI4-to-DPC Cable

UKEIB


Host



Fiber Cable

Fiber Cable



Imager



Image Data OUT

Kodak M969 HQ


Requirements: IMS DigiMam platform rel. 4.2.30.10, 9410 v1.3.3, M969 v5.1 IMS Setup: n on IMS run LCAMconf.exe n into LaserCam Specs at conf, with right mouse button select Add new LCAM Specs n set Enter Prototype=3m969hq, LCAM Device=DASM-LCAM-3M, BITS_OUT=8 n Save all and copy file Spooler/conf/3m969hq/config.dat into Spooler/conf directory n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Center RS232 25-to-9 Host 25 pin side 2 3 7 Adaptor Cable pinout 9 pin side 4 6 1 Note: if 25-to-25 Null Modem Cable is not available,


on Device Setup, LOCAL PRINTERS: n Printer=969, Model=969, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet n Pixel=8, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87

on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=60, Parity=None, Memory=7 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200



on Device Setup, HOST KEYPADS: n Kpad=ims, Hosp=ims, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=969, Film Destination=Processor, Printer1=969(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=Pmsv3k.w87, Mem.Full =On, Image Size =On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=14x17, C=9, D=14 M969 HQ Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=8, Header/Line, Parity=Enable Even, Port=0, Timeout=60

IMS Mammography Giotto Image MD / SD with LASER IMAGER Products


Setup for IMS Mammography Giotto Image MD / SD with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER.......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER........................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) ....................... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual) ....................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8100 LASER IMAGER.......................................................................... 8 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8300 LASER IMAGER.......................................................................... 10 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak Digital Science 969 HQ LASER IMAGER ....................................................... 14

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER........................................................................... 16

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER........................................................................ 18

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER........................................................................ 20

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (1) / Kodak DryView 8200 LASER IMAGER.......................................................................... 22

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (1) / Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)............................... 24

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (1) / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual) ....................... 26



n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (1) / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) ........................................................................................................................................................ 32

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (1) / Kodak Digital Science 969 HQ LASER IMAGER.......................................................................... 34

n Kodak DryView 8900 LASER IMAGER with Mammography Accessory.......................... 36 n Kodak DryView 8150 LASER IMAGER.......................................................................... 38 1 Setup valid also for Kodak PACS LINK 25 PRINT SERVER.



IMS Giotto Image MD / SD via DICOM with Kodak DryView 8300 LASER IMAGER

Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: 8300 v4.9.1, 8300 LUT v3.0.3B, 8300 DICOM board v3.3 Note: mammo images printed with this camera are for referral purposes only Note: it work only with IMS Raffaello v1.1.0.5 because of 8 bit support IMS Raffaello Setup: under Tools/DICOM Configuration/Remote Printers click on Load From File and select Filename=Kodak DryView 8300 check that: Description=8300, AE_TITLE=8300, Hostname=IPaddr.of 8300 Port=104, Rows=2676, Columns=2256, Film Destination=PROCESSOR, Film size=8INx10IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=2, Magnification Type=CUBIC, Configuration Information= LUT=0,10 Photometric Interpretation=MONOCHROME2, Requested Image Size=Off, Auto Orientation=On, Presentation LUT=Off, Auto print=Off, Default (Printer)=On, Padding=On, Trim=Off, Labels=On, 8bit=On click Add and Close To print select an image and press DICOM Print and with Printer=8610 press Print 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=10, Sharp/Smooth=2 n on 8300 Service Menu into Configure User set:

n Modality Group=0

Kodak DryView 8300

DICOM Network

IMSGiotto Image MDmammography system



IMS Giotto Image MD / SD via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: 190 rel. 1.7.29 Note: mammo images printed with this camera are for referral purposes only IMS Raffaello Setup: Set under Tools/DICOM Configuration/Remote Printers set: Description=190, AE_TITLE=190, Hostname=IPaddr.of MIM200 Port=5040, Rows=5120, Columns=4096, Film Destination=PROCESSOR, Film size=14INx17IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=1, Magnification Type=CUBIC, Photometric Interpretation=MONOCHROME2, Labels=On, Auto print=Off, Default (Printer)=On click Add and Close if needed into C:\WINNT\DICOMServices.ini under the section [190] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=CS435\CN0 (to send Curve Shape and Contrast setting). To print select an image and press DICOM Print and with Printer=190 press Print 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

DICOM Network

Kodak 190 cameraIMSGiotto Image MDmammography system



IMS Giotto Image MD / SD via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: 9410 v1.6, 8500 v1.34 Note: mammo images printed with this camera are for referral purposes only Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers IMS Raffaello Setup: Set under Tools/DICOM Configuration/Remote Printers set: Description=8500, AE_TITLE=9410, Hostname=IPaddr.of 9410 Port=1024, Rows=4280, Columns=3380, Film Destination=PROCESSOR, Film size=11INx14IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=15, Magnification Type=CUBIC, Photometric Interpretation=MONOCHROME2, Labels=On, Auto print=Off, Default (Printer)=On click Add and Close if needed into C:\WINNT\DICOMServices.ini under the section [9410] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=LUT=Pmsv3k.w87,9 (to send the Contrast setting). To print select an image and press DICOM Print and with Printer=8500 press Print 9410 Setup: n on Device Setup, LOCAL PRINTERS:



DICOM Network

3M8700DryView

Fiber Cable

Fiber Cable











Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: 9410 v1.6, 8700 v1.34 Note: mammo images printed with this camera are for referral purposes only Note: This setup is basically also valid for 8800/8700 Dual camera

by basically using the correspondent Model into 9410 Local Printers IMS Raffaello Setup: Set under Tools/DICOM Configuration/Remote Printers set: Description=8700, AE_TITLE=9410, Hostname=IPaddr.of 9410 Port=1024, Rows=5220, Columns=4096, Film Destination=PROCESSOR, Film size=14INx17IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=15, Magnification Type=CUBIC, Photometric Interpretation=MONOCHROME2, Labels=On, Auto print=Off, Default (Printer)=On click Add and Close if needed into C:\WINNT\DICOMServices.ini under the section [9410] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=LUT=Pmsv3k.w87,9 (to send the Contrast setting). To print select an image and press DICOM Print and with Printer=8700 press Print 9410 Setup: n on Device Setup, LOCAL PRINTERS:



DICOM Network

3M8700DryView

Fiber Cable

Fiber Cable











Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: 9410 v1.6, 8100 v2.4.1 Note: mammo images printed with this camera are for referral purposes only IMS Raffaello Setup: Set under Tools/DICOM Configuration/Remote Printers set: Description=8100, AE_TITLE=9410, Hostname=IPaddr.of 9410 Port=1024, Rows=5216, Columns=4096, Film Destination=PROCESSOR, Film size=14INx17IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=15, Magnification Type=CUBIC, Photometric Interpretation=MONOCHROME2, Labels=On, Auto print=Off, Default (Printer)=On click Add and Close if needed into C:\WINNT\DICOMServices.ini under the section [9410] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=LUT=Pmsv3k.w87,9 (to send the Contrast setting). To print select an image and press DICOM Print and with Printer=8100 press Print 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5


DICOM Network


Data 37-pin

RS4229-pole Plug




on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=15 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0






Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: mammo images printed with this camera are for referral purposes only IMS Raffaello Setup: Set under Tools/DICOM Configuration/Remote Printers set: Description=8300, AE_TITLE=9410, Hostname=IPaddr.of 9410 Port=1024, Rows=2676, Columns=2256, Film Destination=PROCESSOR, Film size=8INx10IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=2, Magnification Type=CUBIC, Photometric Interpretation=MONOCHROME2, Labels=On, Auto print=Off, Default (Printer)=On click Add and Close if needed into C:\WINNT\DICOMServices.ini under the section [9410] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=LUT=u1_109b.w8u,10 (to send Shape+Contrast setting). To print select an image and press DICOM Print and with Printer=8300 press Print 9410 Setup: n on Device Setup, LOCAL PRINTERS:



KodakDryView 8300Kodak 9410 PACS Link

DICOM Network

Control 9 pin

Data 37 pin











Requirements: IMS Raffaello MD/SD v1.1.0.5 or IMS iWorks rel. SQA5 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera IMS Raffaello Setup: under Tools/DICOM Configuration/Remote Printers click on Load From File and select Filename=Kodak DryView 8610 check that: Description=8610, AE_TITLE=9410, Hostname=IPaddr.of 9410 Port=5040, Rows=6200, Columns=5024, Film Destination=PROCESSOR, Film size=8INx10IN, Medium Type=BLUE FILM, Min density=0, Max density=350 Smoothing Type=1, Magnification Type=CUBIC, Configuration Information= LUT=0,3 Photometric Interpretation=MONOCHROME2, Requested Image Size=Off, Auto Orientation=On, Presentation LUT=Off, Auto print=Off, Default (Printer)=On, Padding=On, Trim=Off, Labels=On, 8bit=Off click Add and Close if not available into C:\WINNT\DICOMServices.ini under the section [9410] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=LUT=0,3 (to send the Contrast setting). To print select an image and press DICOM Print and with Printer=8610 press Print IMS iWorks Setup: Set under iWorks/Utilities/Server Tools/Modify DICOM destination table: AE TITLE=9410, HOST=IPaddr.of 9410, PORT=1024, ALIAS=Kodak 8610 Set under D:\iWorks\Config\ftp_config to be opened with Workpad ROUTE1_TYPE=DICOM_PRINT_BURNED_PROCESSING ROUTE1_ADDR=9410

Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin





ROUTE1_DESTINATION=d:\iWorks\dicom_store 9410 Setup: on SCP PRINTER Menu, Current Provider, SCP Parameters:

n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr=accordingly, SCP=8610 n Copies=1, Contrast Table=3, Max.Density=350 n Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma=Linear in Transmittance, Contrast Group=6, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0


n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT= don’t care n Max.Density=350, Contrast=3, Border Density=0

8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1 n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set:






Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: 9410 v1.6, 969 v5.2 Note: mammo images printed with this camera are for referral purposes only Note: other HQ matrixes 14x17=4096x4992, 11x14=3020x3960 IMS Raffaello Setup: Set under Tools/DICOM Configuration/Remote Printers set: Description=969, AE_TITLE=9410, Hostname=IPaddr.of 9410 Port=1024, Rows=2788, Columns=2076, Film Destination=PROCESSOR, Film size=8INx10IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=15, Magnification Type=CUBIC, Photometric Interpretation=MONOCHROME2, Labels=On, Auto print=Off, Default (Printer)=On click Add and Close if needed into C:\WINNT\DICOMServices.ini under the section [9410] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=LUT=Pmsv3k.w87,9 (to send Shape and Contrast setting). To print select an image and press DICOM Print and with Printer=969 press Print 9410 Setup: n on Device Setup, LOCAL PRINTERS:




DICOM Network

Fiber Cable

Fiber Cable



Kodak M969 HQ







IMS Giotto Image MD / SD via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: MIM200 v6.1, KELI 160 v7.2 Note: mammo images printed with this camera are for referral purposes only IMS Raffaello Setup: Set under Tools/DICOM Configuration/Remote Printers set: Description=160, AE_TITLE=160, Hostname=IPaddr.of MIM200 Port=5040, Rows=5348, Columns=4360, Film Destination=PROCESSOR, Film size=14INx17IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=1, Magnification Type=CUBIC, Photometric Interpretation=MONOCHROME2, Labels=On, Auto print=Off, Default (Printer)=On click Add and Close if needed into C:\WINNT\DICOMServices.ini under the section [160] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=CS435\CN0 (to send Curve Shape and Contrast setting). To print select an image and press DICOM Print and with Printer=160 press Print MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On

Kodak MIM 200

DICOM Network





n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, Border=Black (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: mammo images printed with this camera are for referral purposes only Note: other 2180 matrixes 14x17=4096x5156, 14x14=4096x4132, 11x14=3236x4132 IMS Raffaello Setup: Set under Tools/DICOM Configuration/Remote Printers set: Description=2180, AE_TITLE=2180, Hostname=IPaddr.of MIM200 Port=5040, Rows=2836, Columns=2286, Film Destination=PROCESSOR, Film size=8INx10IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=1, Magnification Type=CUBIC, Photometric Interpretation=MONOCHROME2, Labels=On, Auto print=Off, Default (Printer)=On click Add and Close if needed into C:\WINNT\DICOMServices.ini under the section [2180] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=CS435\CN0 (to send Curve Shape and Contrast setting). To print select an image and press DICOM Print and with Printer=2180 press Print MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:



Kodak MIM 200

DICOM Network

Fiber Cable




n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, Border=Black (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Film Output Dest=Bin 9 (Always=N), Negotia te Color Print=Off






Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: mammo images printed with this camera are for referral purposes only Note: other 1120 matrixes 14x17=4096x5132, 14x14=4096x4108, 11x14=4096x3232 IMS Raffaello Setup: Set under Tools/DICOM Configuration/Remote Printers set: Description=1120, AE_TITLE=1120, Hostname=IPaddr.of MIM200 Port=5040, Rows=2900, Columns=2304, Film Destination=PROCESSOR, Film size=8INx10IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=1, Magnification Type=CUBIC, Photometric Interpretation=MONOCHROME2, Labels=On, Auto print=Off, Default (Printer)=On click Add and Close if needed into C:\WINNT\DICOMServices.ini under the section [1120] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=CS435\CN0 (to send Curve Shape and Contrast setting). To print select an image and press DICOM Print and with Printer=1120 press Print MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:



Kodak MIM 200

DICOM Network

Fiber Cable





n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, Border=Black (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: MIM 200 v6.1, DV8200 v3.5 Note: mammo images printed with this camera are for referral purposes only Note: other 8200 matrixes 14x17=4360x5220, 14x14=4360x4244 IMS Raffaello Setup: Set under Tools/DICOM Configuration/Remote Printers set: Description=8200, AE_TITLE=8200, Hostname=IPaddr.of MIM200 Port=5040, Rows=4360, Columns=3272, Film Destination=PROCESSOR, Film size=11INx14IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=15, Magnification Type=CUBIC, Photometric Interpretation=MONOCHROME2, Labels=On, Auto print=Off, Default (Printer)=On click Add and Close if needed into C:\WINNT\DICOMServices.ini under the section [8200] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=LUT=Pmsv3k.w87,9 (to send Shape and Contrast setting). To print select an image and press DICOM Print and with Printer=8200 press Print MIM200 Setup: n on Configure, Network: n Node Name=MIM , IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)

Kodak MIM 200

DICOM Network


Kodak DryView 8200




n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=N), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=15 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM , TFT=VER693C0, C=6, Smooth=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025





Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: MIM200 v6.1, 8500 v1.34 Note: mammo images printed with this camera are for referral purposes only Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into MIM200 Destination IMS Raffaello Setup: Set under Tools/DICOM Configuration/Remote Printers set: Description=8500, AE_TITLE=8500, Hostname=IPaddr.of MIM200 Port=5040, Rows=4280, Columns=3380, Film Destination=PROCESSOR, Film size=11INx14IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=15, Magnification Type=CUBIC, Photometric Interpretation=MONOCHROME2, Labels=On, Auto print=Off, Default (Printer)=On click Add and Close if needed into C:\WINNT\DICOMServices.ini under the section [8500] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=LUT=Pmsv3k.w87,9 (to send Shape and Contrast setting). To print select an image and press DICOM Print and with Printer=8500 press Print MIM200 Setup: n on Configure, Network:





DICOM Network

3M8700DryView

Fiber Cable

Fiber Cable




n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7







Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: MIM200 v6.1, 8700 v1.34 Note: mammo images printed with this camera are for referral purposes only Note: This setup is basically also valid for 8800/8700 Dual camera

by basically using the correspondent Model into MIM200 Destination IMS Raffaello Setup: Set under Tools/DICOM Configuration/Remote Printers set: Description=8700, AE_TITLE=8700, Hostname=IPaddr.of MIM200 Port=5040, Rows=5220, Columns=4096, Film Destination=PROCESSOR, Film size=14INx17IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=15, Magnification Type=CUBIC, Photometric Interpretation=MONOCHROME2, Labels=On, Auto print=Off, Default (Printer)=On click Add and Close if needed into C:\WINNT\DICOMServices.ini under the section [8700] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=LUT=Pmsv3k.w87,9 (to send Shape and Contrast setting). To print select an image and press DICOM Print and with Printer=8700 press Print MIM200 Setup: n on Configure, Network:





DICOM Network

3M8700DryView

Fiber Cable

Fiber Cable




n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7







Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: mammo images printed with this camera are for referral purposes only IMS Raffaello Setup: Set under Tools/DICOM Configuration/Remote Printers set: Description=8100, AE_TITLE=8100, Hostname=IPaddr.of MIM200 Port=5040, Rows=5216, Columns=4096, Film Destination=PROCESSOR, Film size=14INx17IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=15, Magnification Type=CUBIC, Photometric Interpretation=MONOCHROME2, Labels=On, Auto print=Off, Default (Printer)=On click Add and Close if needed into C:\WINNT\DICOMServices.ini under the section [8100] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=LUT=Pmsv3k.w87,9 (to send Shape and Contrast setting). To print select an image and press DICOM Print and with Printer=8100 press Print MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:



KodakDryView 8100Kodak MIM 200

DICOM Network


Data 37-pin

RS4229-pole Plug












Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: mammo images printed with this camera are for referral purposes only IMS Raffaello Setup: Set under Tools/DICOM Configuration/Remote Printers set: Description=8300, AE_TITLE=8300, Hostname=IPaddr.of MIM200 Port=5040, Rows=2676, Columns=2256, Film Destination=PROCESSOR, Film size=8INx10IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=2, Magnification Type=CUBIC, Photometric Interpretation=MONOCHROME2, Labels=On, Auto print=Off, Default (Printer)=On click Add and Close if needed into C:\WINNT\DICOMServices.ini under the section [8300] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=LUT=u1_109b.w8u,10 (to send Shape+Contrast setting). To print select an image and press DICOM Print and with Printer=8300 press Print MIM200 Setup: n on Configure, Network:





DICOM Network

Control 9 pin

Data 37 pin





n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= u1_109b.w8u (Always=Y), Contrast (dry)=10 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off




IMS Giotto Image MD / SD via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: IMS Raffaello MD/SD v1.1.0.5 or IMS iWorks rel. SQA5 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera IMS Raffaello Setup: under Tools/DICOM Configuration/Remote Printers click on Load From File and select Filename=Kodak DryView 8610 check that: Description=8610, AE_TITLE=8610, Hostname=IPaddr.of MIM200 Port=5040, Rows=6200, Columns=5024, Film Destination=PROCESSOR, Film size=8INx10IN, Medium Type=BLUE FILM, Min density=0, Max density=350 Smoothing Type=1, Magnification Type=CUBIC, Configuration Information= LUT=0,3 Photometric Interpretation=MONOCHROME2, Requested Image Size=Off, Auto Orientation=On, Presentation LUT=Off, Auto print=Off, Default (Printer)=On, Padding=On, Trim=Off, Labels=On, 8bit=Off click Add and Close if not available into C:\WINNT\DICOMServices.ini under the section [8610] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=LUT=0,3 (to send the Contrast setting). To print select an image and press DICOM Print and with Printer=8610 press Print IMS iWorks Setup: Set under iWorks/Utilities/Server Tools/Modify DICOM destination table: AE TITLE=8610, HOST=IPaddr.of MIM200, PORT=5040, ALIAS=Kodak 8610 Set under D:\iWorks\Config\ftp_config to be opened with Workpad ROUTE1_TYPE=DICOM_PRINT_BURNED_PROCESSING ROUTE1_ADDR=8610

Kodak DryView 8610

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin





ROUTE1_DESTINATION=d:\iWorks\dicom_store MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n Contrast (dry)=3 (Always=N) n Modality Group=6 (which corresponds to TFT/ULUT=gsdfaa0p.w8u) n Conv.Group=1, Gamma Table=Linear in Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=ims n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:



n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set:






Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: MIM200 v6.1, 969 v5.2 Note: mammo images printed with this camera are for referral purposes only Note: other HQ matrixes 14x17=4096x4992, 11x14=3020x3960 IMS Raffaello Setup: Set under Tools/DICOM Configuration/Remote Printers set: Description=969, AE_TITLE=969, Hostname=IPaddr.of MIM200 Port=5040, Rows=2788, Columns=2076, Film Destination=PROCESSOR, Film size=8INx10IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=15, Magnification Type=CUBIC, Photometric Interpretation=MONOCHROME2, Labels=On, Auto print=Off, Default (Printer)=On click Add and Close if needed into C:\WINNT\DICOMServices.ini under the section [969] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=LUT=Pmsv3k.w87,9 (to send Shape and Contrast setting). To print select an image and press DICOM Print and with Printer=969 press Print MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 969, Set: n General: Log.Name=969 n General: Database Name=969, Model=969, Memory=32 n Media Info: Media=35x43cm, 4096x5002, 4912, Blue

Kodak MIM 200

DICOM Network

Fiber Cable

Fiber Cable



Kodak M969 HQ



n Media Info: Media= 11x14in, 3030x4096, 4006, Blue n Media Info: Media= 8x10in, 2086x2929, 2839, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.3457 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsv3k.w87 (Always=N), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=15 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 969 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60



IMS Giotto Image MD / SD via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory

Requirements: IMS Raffaello MD/SD v1.1.0.5 or IMS iWorks rel. SQA5 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) IMS Raffello Setup: under Tools/DICOM Configuration/Remote Printers click on Load From File and select Filename=Kodak DryView 8900 check that: Description=8900, AE_TITLE=8900, Hostname=IPaddr.of 8900 Port=5040, Rows=6368, Columns=5056, Film Destination=PROCESSOR, Film size=8INx10IN, Medium Type=BLUE FILM, Min density=0, Max density=350 Smoothing Type=15, Magnification Type=CUBIC, Configuration Information= LUT=gsdfaa0p.w8u,3 Photometric Interpretation=MONOCHROME2, Requested Image Size=Off, Auto Orientation=On, Presentation LUT=Off, Auto print=Off, Default (Printer)=On, Padding=On, Trim=Off, Labels=On, 8bit=Off click Add and Close if not available into C:\WINNT\DICOMServices.ini under the section [8900] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=LUT=gsdfaa0p.w8u,3 (to send Shape andContrast setting). To print select an image and press DICOM Print and with Printer=8900 press Print IMS iWorks Setup: Set under iWorks/Utilities/Server Tools/Modify DICOM destination table: AE TITLE=8900, HOST=IPaddr.of 8900, PORT=5040, ALIAS=Kodak 8900 Set under D:\iWorks\Config\ftp_config to be opened with Workpad ROUTE1_TYPE=DICOM_PRINT_BURNED_PROCESSING ROUTE1_ADDR=8900 ROUTE1_DESTINATION=d:\iWorks\dicom_store 8900 Setup:


DICOM Network

Kodak DryView 8900



n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly




n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT=gsdfaa0p.w8u (Always=N), Contrast=3 (Always=N) n Smoothing Type=15 (Always=N), Image Dmin=0.00 (Always=N), n Image Dmax=3.50 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ims



IMS Giotto Image MD / SD via DICOM with Kodak DryView 8150 LASER IMAGER

Requirements: IMS Raffaello MD/SD v1.1.0.5 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) IMS Raffello Setup: Set under Tools/DICOM Configuration/Remote Printers set: Description=8150, AE_TITLE=DV8150, Hostname=IPaddr.of 8150 Port=5040, Rows=5390, Columns=4438, Film Destination=PROCESSOR, Film size=14INx17IN, Medium Type=BLUE FILM, Min density=0, Max density=300 Smoothing Type=15, Magnification Type=CUBIC, Photometric Interpretation=MONOCHROME2, Labels=On, Auto print=Off, Default (Printer)=On click Add and Close if needed into C:\WINNT\DICOMServices.ini under the section [8150] add: trim=1 (to turn on the trim), requested_image_size=1 (to turn on Req.ImageSize), configuration_information=LUT=Pmsb.w87,9 (to send Shape andContrast setting). To print select an image and press DICOM Print and with Printer=8150 press Print 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:


n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On


DICOM Network

Kodak DryView 8150



n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10




Specific Setup for Merge workstation eFilm with LASER IMAGERS OEM Data Manufacturer Merge Modality workstation Model eFilm sw version v1.8.3 Implement. Class UID 1.2.804.114118.3 Implement. Version Name eFilm Kodak Data DICOM-interface MIM internal / external or 9410 as below reported DICOM-intf sw version as below reported Printer model All cameras as below reported Printer sw version as below reported What’s new: The setup of a Kodak printer for a given OEM Modality was split in 2 separate documents: - the generic Setup Catalog for Kodak Cameras - the specific Setup Manual for a given OEM Modality





What’s inside this document: n OEM Modality Setup (ie how to configure,into the OEM console,the Kodak printer) 2 n DryView correspondance with Kodak Setup Catalog for DryView cameras................ 3 n Image Quality setup into MIM (or 9410) for DryView cameras ............................... 4 n More info on OEM Modality when connected to DryView cameras .............................. 5 n Wet correspondance with Kodak Setup Catalog for Wet cameras .................................. 6 n Image Quality setup into MIM (or 190) for Wet cameras ............................................... 7 n More info on OEM Modality eg Page-Mode and IQ parameters sent out by OEM ........ 8 n Miscellaneous: Deviations from Kodak Setup Catalog / Known Problems / Notes........ 9 OEM Modality Setup ie how to configure into the OEM console the Kodak printer: Note: MIM setup is basically also valid for 9410 by using AE=9410, Port=1024 eFilm Setup: n into File/DICOM Print/DICOM Printers set: n Description=DryView, AE Title=DV8150, Hostname=IP-address accordingly n Port=5040, Format=STANDARD\4,5, Priority=MED, Medium=BLUE FILM n Copies=1, Film Orientation=PORTRAIT, Film Size=14INX17IN n Film Destination=PROCESSOR, Resolution=300 DPI n Magnification Type=CUBIC, Smoothing= no entry, Trim=NO n Dmin=20, Dmax=300, Border=BLACK, Empty=399, Polarity=NORMAL n Click Add, OK



DryView section: Setup for Kodak DryView cameras ie 8900, 8700, 8610, 8600, 8500, 8300, 8200, 8150, 8100, 1000 Correspondance with Kodak Setup Catalog for DryView cameras: Note: the Kodak Setup Catalog contains that part of a printer installation which is Generic, ie common to all DICOM connections independently from the Specific modality connected. Therefore, as first step, setup the printer as per the correspondent page of the Kodak Setup Catalog, and then, as second and final step, setup the Image Quality parameters as per the Setup Manual for the Specific OEM Modality here below reported. MIM (inside printer) 8900 8150 into Kodak catalog see Setup as per page

19 20

MIM sw version 5.6.b5 5.7.b8 Printer sw version Rev.E ie 2.11 1.0.2.b04 MIM external 8700, 8500 8100 8300 8610 (8600) 8200 1000 into Kodak catalog see Setup as per page

15 16 17 18 14 21

MIM sw version 6.1 6.1 6.1 6.1 6.1 2.0.b3 Printer sw version 1.34 2.4.1 3.5 2.4 (2.5) 4.9.1 1.0.b8 9410 external 8700, 8500 8100 8300 8610 (8600) into Kodak catalog see Setup as per page

7 8 9 10

9410 sw version 1.6 1.6 1.6 1.6 Printer sw version 1.34 2.4.1 3.5 2.4 (2.5)



Image Quality setup into MIM (or 9410) for DryView cameras: MIM (or 9410) Parameters

8900, 8150, 8700, 8500, 8200, 8100,

1000 (see Note1 below)

8300 (see Note2 below,

confirm Y/N)

8610, 8600


Pmsv3k.w87

(Y)

u1_109s.w8u

(Y)

(gsdfaa0p.w8u) 6


9 (Y)

10 (Y)

3 (Y)


300 (Y)

300 (Y)

350 (Y)


2 (Y)

2 (Y)

1 (Y)


N N N

8610 Convolution / Kernel Group Not available Not available 1 8610 Gamma Table Not available Not available Transmittance Note1: in particular for 8100, 8200, 8150 use TFT=Pmsb.w87. Note2: OEM Modality tested also with 8300 standalone ie without MIM or 9410 in front? (Yes/No, parameters)

Yes Mod.Gr.=0, D=16, C=10, smooth=1




Works the OEM Modality in Page-Mode? (Yes/No) No Note: see Page-Mode definition and matrixes into Kodak cameras setup catalog. Are Image Data lutted by the OEM Modality, ie Linear-in-Density LUT into Camera? (Yes/No)

No



Value sent out for 8900, 8150, 8700, 8500, 8200, 8100,

1000




No

Max. Density Yes 300 300 300 Magnification Yes CUBIC CUBIC CUBIC Smoothing No PLUT No Illumination (PLUT) No Reflective Ambient Light (PLUT)

No



Wet section: Setup for Kodak Wet cameras ie 160, 2180, 1120, 190 Correspondance with Kodak Setup Catalog for Wet cameras: Note: the Kodak Setup Catalog contains that part of a printer installation which is Generic, ie common to all DICOM connections independently from the Specific modality connected. Therefore, as first step, setup the printer as per the correspondent page of the Kodak Setup Catalog, and then, as second and final step, setup the Image Quality parameters as per the Setup Manual for the Specific OEM Modality here below reported. 160 2180 1120 190 into Kodak catalog see Setup as per page

11 12 13 6

MIM sw version 6.1 6.1 6.1 Not present Printer sw version 7.2 2.17H 2.40 / 032 1.7.29 Note: in regards to 969 parameters use the same as per 8700 setup.



Image Quality setup into MIM (or 190) for Wet cameras: MIM (or 190) Parameters 160, 2180, 1120, 190

(see Note below) Curve Shape (Always Apply=Y/N)

3 (Y)


0 (Y)


300 (Y)

PLUT=Y/N (not available on 190)

N

Note: reported setup was tested eg for 160 and tentatively is valid also for other cameras ie 2180, 1120, 190.



More info on OEM Modality when connected to Wet cameras: Works the OEM Modality in Page-Mode? (Yes/No) No Note: see Page-Mode definition and matrixes into Kodak cameras setup catalog. Are Image Data lutted by the OEM Modality, ie Linear-in-Density LUT into Camera? (Yes/No)

No

Note: Linea-in-Density LUT into Camera means eg CurveShape=0,Dmax=3.00,Contrast=0. Which are the Image Quality parameters sent out by the OEM Modality: DICOM Parameters


Value sent out for 160, 2180, 1120,

190 Config. Information (CurveShape\Contrast)

Yes

CS435\CN0

Max. Density Yes 300 Magnification Yes CUBIC Smoothing No PLUT No Illumination (PLUT) No Reflective Ambient Light (PLUT)

No



Miscellaneous: Deviations in respect to the printer setup reported into Kodak Catalog: e.g. disable N-Event ie NeventReports=No (Always=Y) Known Problems or Limitations: Notes:

MeVis BreastCare Mammography Soft Copy Reading with LASER IMAGER Products


Setup for MeVis BreastCare Mammography Soft Copy Reading with LASER IMAGERS MeVis BreastCare Soft Copy Reading Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) .................................................................................................................. 4




MeVis BreastCare Soft Copy Reading via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: MeVis BreastCare SCR v1-2 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: in sw v1-2 Image Data lutted by Mevis, linear-in-Density LUT into Camera MeVis BreastCare SCR Setup: - into DICOM / Setup/ DICOM Setup set: - Entity Type: Printer=On, AEtitle=9410, IPaddr=accordingly, Port=1024 - Printer Setup: Printer Name=Kodak 8610, Dmax=350 - Printer Setup: Config.Info=LUT=0,5 - Printer Setup: Portrait matrix (Columns x Rows)=5024 x 6200 - Printer Setup: Landscape matrix (Columns x Rows)=6200 x 5024 - Printer Setup: Graylevel 16(12)=On (Off if 8600), 8=Off (On if 8600) - Printer Setup: Medium=Blue Film, Medium Size=8INx10IN 9410 Setup:

n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr= accordingly n SCP=8610, Copies=1, Contrast Table=5 n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Density, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=Yes, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

MeVis BreastCareSoft Copy ReadingReview Console

Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin







n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma Table=Xmittance, Image Size=Scale To Fit n Detector Size= don’t care




MeVis BreastCare Soft Copy Reading via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: MeVis BreastCare SCR v1-2 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: This setup is basically also valid for 25 PS computer Note: in sw v1-2 Image Data lutted by Mevis, linear-in-Density LUT into Camera MeVis BreastCare SCR Setup: - into DICOM / Setup/ DICOM Setup set: - Entity Type: Printer=On, AEtitle=8610, IPaddr=accordingly, Port=5040 - Printer Setup: Printer Name=Kodak 8610, Dmax=350 - Printer Setup: Config.Info=LUT=0,5 - Printer Setup: Portrait matrix (Columns x Rows)=5024 x 6200 - Printer Setup: Landscape matrix (Columns x Rows)=6200 x 5024 - Printer Setup: Graylevel 16(12)=On (Off if 8600), 8=Off (On if 8600) - Printer Setup: Medium=Blue Film, Medium Size=8INx10IN MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qual., 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even


Kodak DryView 8610

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin




n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y), Contrast (dry)=5 (Always=N), n Modality Group=1 (which corresponds to TFT/ULUT=upmsv3kp.w8u), n Conv.Group=1, Gamma Table= Linear in Density n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=scr n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:


n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma= Xmittance, Image Size=Scale To Fit, Detector Size= don’t care




MeVis BreastCare Soft Copy Reading via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory

Requirements: MeVis BreastCare SCR v1-2 Requirements: 8900 rev.E ie release 2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: in sw v1-2 Image Data lutted by Mevis, linear-in-Density LUT into Camera MeVis BreastCare SCR Setup: - into DICOM / Setup/ DICOM Setup set: - Entity Type: Printer=On, AEtitle=8900, IPaddr=accordingly, Port=5040 - Printer Setup: Printer Name=Kodak 8900, Dmax=350 - Printer Setup: Config.Info=LUT=Wrkstn2a.w87,1 - Printer Setup: Portrait matrix (Columns x Rows)=5056 x 6368 (for 8x10) - Printer Setup: Landscape matrix (Columns x Rows)=6368 x 5056 (for 8x10) - Printer Setup: Medium=Blue Film, Medium Size=8INx10IN - Printer Setup: Graylevel 16(12)=On, 8=Off - Printer Setup: Portrait matrix (Columns x Rows)=6368 x 7656 (for 10x12) - Printer Setup: Landscape matrix (Columns x Rows)=7656 x 6368 (for 10x12) - Printer Setup: Medium=Blue Film, Medium Size=10INx12IN 8900 Setup: n on Configuration, System, Network:

n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr= accordingly



n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any


DICOM Network

Kodak DryView 8900



n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT=Wrkstn2a.w87 (Always=N), Contrast=1 (Always=N), n Smoothing Type=0 (Always=N), Image Polarity=Normal (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=scr

Planmeca Dental Systems with LASER IMAGER Products


Setup for Planmeca Dental Systems ProMax/Proline/Dixi2/Dimax2 with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /



















Planmeca ProMax/Proline/Dixi2/Dimax2 via DICOM with Kodak DryView 8300 LASER IMAGER

Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [8300] (note: set here the AE Title of the 8300) PORT_NUMBER=104 HOST_NAME= IP address of 8300 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=8300 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=8INX10IN, Magnification Type=CUBIC Smoothing Type=0, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,10 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0 Print Level: Film Session=Off, Film Box=On Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=On

Planmeca Dimaxis workstation

Kodak DryView 8300

DICOM Network



Note: on application into Administration\Global Settings\Panoramic set Resolution=Normal to print Panoramic images Landscape with matrix 2424x1032 Note: on Dimaxis application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=8300, Copies=1 and press OK: 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=10, Sharp/Smooth=0 n on 8300 Service Menu into Configure User set:

n Modality Group=0



Planmeca ProMax/Proline/Dixi2/Dimax2 via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: 190 rel. 1.7.29 Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [190] (note: set here the AE Title of the 190) PORT_NUMBER=5040 HOST_NAME= IP address of 190 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=190 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=14INX17IN, Magnification Type=CUBIC Smoothing Type=NORMAL, Border=BLACK, Empty Image Density=BLACK Configuration Information=CS435\CN0\PD1.2 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0 Print Level: Film Session=On, Film Box=Off Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=Off Note: on Dimaxis application to print select image, press DICOM\DICOM Print,


DICOM Network

Kodak 190 camera



Default Printer AE: Select=190, Copies=1 and press OK 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type= RJ45



Planmeca ProMax/Proline/Dixi2/Dimax2 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [9410] (note: set here the AE Title of the 9410) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=9410 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=11INX14IN, Magnification Type=CUBIC Smoothing Type=11, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,9 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0




DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable



Print Level: Film Session=On, Film Box=Off Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=Off Note: on Dimaxis application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=9410, Copies=1 and press OK










Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [9410] (note: set here the AE Title of the 9410) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=9410 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=14INX17IN, Magnification Type=CUBIC Smoothing Type=11, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,9 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0




DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable



Print Level: Film Session=On, Film Box=Off Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=Off Note: on Dimaxis application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=9410, Copies=1 and press OK










Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: 9410 v1.6, 8100 v2.4.1 Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [9410] (note: set here the AE Title of the 9410) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=9410 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=14INX17IN, Magnification Type=CUBIC Smoothing Type=11, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,9 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0 Print Level: Film Session=On, Film Box=Off Other Properties:



DICOM Network


Data 37-pin

RS4229-pole Plug



Support PRINT JOB=Off, Prints Only 8 Bit Images=Off Note: on Dimaxis application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=9410, Copies=1 and press OK

9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0






Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [9410] (note: set here the AE Title of the 9410) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=9410 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=8INX10IN, Magnification Type=CUBIC Smoothing Type=0, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,10 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0 Print Level: Film Session=On, Film Box=Off Other Properties:



DICOM Network

Control 9 pin

Data 37 pin




Support PRINT JOB=Off, Prints Only 8 Bit Images=On Note: on application into Administration\Global Settings\Panoramic set Resolution=Normal to print Panoramic images Landscape with matrix 2424x1032 Note: on Dimaxis application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=9410, Copies=1 and press OK:




n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0






Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [9410] (note: set here the AE Title of the 9410) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=9410 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=8INX10IN, Magnification Type=CUBIC Smoothing Type=1, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,3 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0 Print Level: Film Session=On, Film Box=Off

PhilipsEasyVision / EasyRAD

Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin




Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=Off (if 8600 On) Note: on Dimaxis application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=9410, Copies=1 and press OK




n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=3, Max.Density=350 n Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Gamma=Linear in Transmittance, Contrast Group=6, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1 n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set:




Planmeca ProMax/Proline/Dixi2/Dimax2 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: MIM 200 v6.1, KELI 160 v5.2 Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [160] (note: set here the AE Title of the MIM200) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=160 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=14INX17IN, Magnification Type=CUBIC Smoothing Type=NORMAL, Border=BLACK, Empty Image Density=BLACK Configuration Information=CS435\CN0 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0 Print Level: Film Session=On, Film Box=Off Other Properties:


Kodak MIM 200

DICOM Network


Kodak 160 camera



Support PRINT JOB=Off, Prints Only 8 Bit Images=Off Note: on Dimaxis application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=160, Copies=1 and press OK MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Interpolation=Cubic, Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None (Always=N) n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: MIM200 v6.1, 2180 rel. 2.17H Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [2180] (note: set here the AE Title of the MIM200) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=2180 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=14INX17IN, Magnification Type=CUBIC Smoothing Type=NORMAL, Border=BLACK, Empty Image Density=BLACK Configuration Information=CS435\CN0 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0 Print Level: Film Session=On, Film Box=Off Other Properties:


Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 2180 camera






n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=Black (Always=N) n Interpolation=Cubic, Border Dmax=3.99 n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off






Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [1120] (note: set here the AE Title of the MIM200) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=1120 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=14INX17IN, Magnification Type=CUBIC Smoothing Type=NORMAL, Border=BLACK, Empty Image Density=BLACK Configuration Information=CS435\CN0 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0 Print Level: Film Session=On, Film Box=Off Other Properties:


Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 1120 camera






n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=Black (Always=N) n Interpolation=Cubic, Border Dmax=3.99 n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off






Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [8200] (note: set here the AE Title of the MIM200) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=8200 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=14INX17IN, Magnification Type=CUBIC Smoothing Type=11, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,9 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0 Print Level: Film Session=On, Film Box=Off


Kodak MIM 200

DICOM Network


Kodak DryView 8200



Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=Off Note: on Dimaxis application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=8200, Copies=1 and press OK MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:



n at Keypad connected to MIM, press Menu, Service Menu, SCP Services: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=11 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N)



n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off

8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM / SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025





Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into MIM200 Destination Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [8500] (note: set here the AE Title of the MIM200) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=8500 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=11INX14IN, Magnification Type=CUBIC Smoothing Type=11, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,9 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0


DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable




Print Level: Film Session=On, Film Box=Off Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=Off Note: on Dimaxis application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=8500, Copies=1 and press OK MIM200 Setup: n on Configure, Network:




n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=11 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=11INx14IN (Always=N)



n Negotiate Color Print=Off 8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60





Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [8700] (note: set here the AE Title of the MIM200) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=8700 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=14INX17IN, Magnification Type=CUBIC Smoothing Type=11, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,9 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0


DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable




Print Level: Film Session=On, Film Box=Off Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=Off Note: on Dimaxis application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=8700, Copies=1 and press OK MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:



n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=11 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)



n Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Disable Even, Timeout=60





Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [8100] (note: set here the AE Title of the MIM200) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=8100 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=14INX17IN, Magnification Type=CUBIC Smoothing Type=11, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,9 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0 Print Level:


DICOM Network


Data 37-pin

RS4229-pole Plug




Film Session=On, Film Box=Off Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=Off Note: on Dimaxis application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=8100, Copies=1 and press OK MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7










Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [8300] (note: set here the AE Title of the MIM200) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=8300 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=8INX10IN, Magnification Type=CUBIC Smoothing Type=0, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,10 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0 Print Level: Film Session=On, Film Box=Off


DICOM Network

Control 9 pin

Data 37 pin





Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=On Note: on application into Administration\Global Settings\Panoramic set Resolution=Normal to print Panoramic images Landscape with matrix 2424x1032 Note: on Dimaxis application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=8300, Copies=1 and press OK MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symm=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5







Planmeca ProMax/Proline/Dixi2/Dimax2 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [8610] (note: set here the AE Title of the MIM200) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=8610 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=8INX10IN, Magnification Type=CUBIC Smoothing Type=1, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,3 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0 Print Level:

Kodak DryView 8610

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin





Film Session=On, Film Box=Off Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=Off (if 8600 On) Note: on Dimaxis application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=8610, Copies=1 and press OK MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=gsdfaa0p.w8u (Always=N), Contrast (dry)=3 (Always=N) n Modality Group=6, Conv.Group=1, Gamma Table=Linear in Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off



8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set:





Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [8900] (note: set here the AE Title of the 8900) PORT_NUMBER=5040 HOST_NAME= IP address of 8900 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=8900 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=14INX17IN, Magnification Type=CUBIC Smoothing Type=11, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,9 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0 Print Level: Film Session=On, Film Box=Off Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=Off


DICOM Network

Kodak DryView 8900



Note: on Dimaxis application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=8900, Copies=1 and press OK 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:







Requirements: Planmeca Dimaxis rel. 3.1.2 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [DV8150] (note: set here the AE Title of the 8150) PORT_NUMBER=5040 HOST_NAME= IP address of 8150 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=DV8150 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=14INX17IN, Magnification Type=CUBIC Smoothing Type=11, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,9 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0 Print Level: Film Session=On, Film Box=Off Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=Off


DICOM Network

Kodak DryView 8150



Note: on Dimaxis application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=DV8150, Copies=1 and press OK 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:






Planmeca ProMax/Proline/Dixi2/Dimax2 via DICOM with Kodak Color Medical Imager 1000

Requirements: Planmeca Dimaxis rel. 3.2.0 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Planmeca Setup: - into file C:\Merge\Config\Mergecom.APP set: [CMI1000] (note: set here the AE Title of the CMI1000) PORT_NUMBER=5040 HOST_NAME= IP address of CMI1000 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=1000 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, Dimaxis will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=8INX10IN, Magnification Type=CUBIC Smoothing Type=11, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,9 Preferred Image Sizes (Pixels): Panoramic: Width=0, Height=0, Cephalometric: Width=0, Height=0 Intraoral: Width=0, Height=0 Print Level: Film Session=On, Film Box=Off Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=On Note: on Dimaxis application to print select image, press DICOM\DICOM Print,


DICOM Network

Kodak CMI 1000



Default Printer AE: Select=1000, Copies=1 and press OK CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)






Planmed Mammography CCD-Spot Imaging with LASER IMAGER Products

Author: [email protected], Edition: November ´04 1

Setup for Planmed Mammography CCD-Spot Imaging with LASER IMAGERS Planmed CCD-Spot Imaging Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8610 LASER IMAGER (see also 8600) .................................................................................................................. 2

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGER (see also 8600) (1) ............................................................................................................. 4





Planmed CCD-Spot Imaging via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: Planmed DigiGuide v1.0.2 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Planmed Setup: - into file C:\Merge\Config\Mergecom.APP set: [9410] (note : set here the AE Title of the 9410) PORT_NUMBER=1024 HOST_NAME= IP address of 9410 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=9410 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, DigiGuide will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=8INX10IN, Magnification Type=CUBIC Smoothing Type=1, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,3 Preferred Image Sizes (Pixels): Width=0, Height=0 Print Level:

Planmed MammographyCCD-Spot Imaging

Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin




Film Session=On, Film Box=Off Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=Off (if 8600 On) Note: on DigiGuide application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=9410, Copies=1 and press OK 9410 Setup:

n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr= accordingly n SCP=8610, Copies=1, Contrast Table=3 n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma=Linear in Transmittance, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=Yes, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0




n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma=Xmittance, Image Size=Scale To Fit,Detector Size= don’t care




Planmed CCD-Spot Imaging via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: Planmed DigiGuide v1.0.2 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Planmed Setup: - into file C:\Merge\Config\Mergecom.APP set: [8610] (note : set here the AE Title of the MIM200) PORT_NUMBER=5040 HOST_NAME= IP address of MIM200 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=8610 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, DigiGuide will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=8INX10IN, Magnification Type=CUBIC Smoothing Type=1, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,3 Preferred Image Sizes (Pixels): Width=0, Height=0


Kodak DryView 8610

DICOM Network

Control 9 pin

Data 37 pin


Kodak MIM 200



Print Level: Film Session=On, Film Box=Off Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=Off (if 8600 On) Note: on DigiGuide application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=8610, Copies=1 and press OK MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qual., 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n Contrast (dry)=3 (Always=N) n Modality Group=6 (which corresponds to TFT/ULUT=gsdfaa0p.w8u) n Conv.Group=1, Gamma Table=Linear in Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Pola rity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off



n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None (Always=N) n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:






Planmed CCD-Spot Imaging via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory

Requirements: Planmed DigiGuide v1.0.2 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Planmed Setup: - into file C:\Merge\Config\Mergecom.APP set: [8900] (note : set here the AE Title of the 8900) PORT_NUMBER=5040 HOST_NAME= IP address of 8900 SERVICE_LIST= Print_Service_List - on application into Administration\DICOM Settings\Applications Default Printer AE: Select=8900 and into Setup set: Note: if a DICOM parameter is set here to DEFAULT, DigiGuide will not send it Film Session: Priority=HIGH, Medium Type=BLUE FILM, Film Destination=PROCESSOR Film Box: Film Orientation=PORTRAIT, Film Size=8INX10IN, Magnification Type=CUBIC Smoothing Type=15, Border Density=BLACK, Empty Image Density=BLACK Configuration Information=LUT=0,3 Preferred Image Sizes (Pixels): Width=0, Height=0 Print Level: Film Session=On, Film Box=Off Other Properties: Support PRINT JOB=Off, Prints Only 8 Bit Images=Off


DICOM Network

Kodak DryView 8900



Note: on DigiGuide application to print select image, press DICOM\DICOM Print, Default Printer AE: Select=8900, Copies=1 and press OK 8900 Setup: n on Configuration, System, Network:





n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT=gsdfaa0p.w8u (Always=N), Contrast=3 (Always=N) n Smoothing Type=15 (Always=N), Image Dmin=0.00 (Always=N), n Image Dmax=3.50 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=planm

Planmed Mammography FFDM with LASER IMAGER Products


Setup for Planmed Mammography FFDM with LASER IMAGERS Planmed FFDM Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8610 LASER IMAGER (see also 8600) .................................................................................................................. 2

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGER (see also 8600) (1) ............................................................................................................. 4





Planmed FFDM via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: Planmed FFDM Nuance SoftView v5.3beta Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Planmed Setup: - into Service Tool / HardCopy Server select Printer=ISGDICOMKodakDPS, - Type=515, IP=accordingly, Port=1024, Title=9410 9410 Setup:

n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr= accordingly n SCP=8610, Copies=1, Contrast Table=3 n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma=Linear in Transmittance, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=Yes, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0


Planmed MammographyFFDM

Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin






n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma=Xmittance, Image Size=Scale To Fit,Detector Size= don’t care




Planmed FFDM via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: Planmed FFDM Nuance SoftView v5.3beta Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Planmed Setup: - into Service Tool / HardCopy Server select Printer=ISGDICOMKodakDPS, - Type=515, IP=accordingly, Port=5040, Title=8610 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qual., 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On


Kodak DryView 8610

DICOM Network

Control 9 pin

Data 37 pin


Kodak MIM 200



n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n Contrast (dry)=3 (Always=N) n Modality Group=6 (which corresponds to TFT/ULUT=gsdfaa0p.w8u) n Conv.Group=1, Gamma Table=Linear in Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=Y) n Smoothing Type=1 (Always=Y), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None (Always=N) n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:






Planmed FFDM via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory

Requirements: Planmed FFDM Nuance SoftView v5.3beta Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Planmed Setup: - into Service Tool / HardCopy Server select Printer=ISGDICOMKodakDPS, - Type=515, IP=accordingly, Port=5040, Title=8900 8900 Setup: n on Configuration, System, Network:




n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4


DICOM Network

Kodak DryView 8900



n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT=gsdfaa0p.w8u (Always=N), Contrast=3 (Always=N) n Smoothing Type=15 (Always=N), Image Dmin=0.00 (Always=N), n Image Dmax=3.50 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=planm

QR CT dental system NewTom 9000 / 3G with LASER IMAGER Products


Setup for QR CT dental system NewTom 9000 / 3G with LASER IMAGERS Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) ..................... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual) ..................... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak Digital Science 969 HQ LASER IMAGER .......................................................... 2 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8200 LASER IMAGER......................................................................... 2 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual).................... 2 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual).................... 2 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Digital Science 969 HQ LASER IMAGER...................................................... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8100 LASER IMAGER ............................................................................... 5 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8300 LASER IMAGER ............................................................................... 5 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) ........................................................................................................................... 5

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER......................................................................... 5

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER......................................................................... 5

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) ................................................................................................................. 5




Kodak Ektascan 1120 LASER PRINTER ....................................................................... 8 n Kodak DryView 8900 LASER IMAGER......................................................................... 10 n Kodak DryView 8150 LASER IMAGER......................................................................... 12 n Kodak Color Medical Imager 1000 ................................................................................. 14



QR CT dental NewTom 9000 / 3G via DICOM with Kodak DV8700, DV8500, DV8200 and 969 HQ LASER IMAGER

Requirements: QR NewTom 9000 / 3G CT dental system DLL-DICOM v1.0.0.5 Requirements: MIM200 v6.1, 9410 v1.6 Requirements: 8200 v3.5, 8500 v1.34, 8700 v1.34, 969 v5.2 Note: 8200 only with MIM200 in front, all other cameras with MIM200 and 9410 Note: The below setup is basically also valid for 8200, 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and 969 cameras by basically using the correspondent Model into MIM200 Destination or into 9410 Local Printers

Note: on QR only a DICOM camera could be installed Note: 8700 matrix 14x17=4096x5220 ie 319.49 x 407.16 mm Note: 8500 matrix 11x14=3380x4280 ie 263.64 x 333.84 mm Note: 8200 matrix 14x17=4360x5220 ie 340.08 x 407.16 mm Note: 8200 matrix 14x14=4360x4244 ie 340.08 x 331.03 mm Note: 8200 matrix 11x14=3272x4360 ie 255.22 x 340.08 mm Note: 969 matrix 14x17=4096x4992 ie 335.87 x 409.34 mm Note: 969 matrix 11x14=3020x3960 ie 247.64 x 324.72 mm Note: 969 matrix 8x10=2076x2788 ie 170.23 x 228.62 mm QR Setup: n into Start/Programs/MedStation 3.5/Printer Server Configuration/Configuration n set Spool path=C:\MEDST35\PRNSRV\SPOOL, Sleep=1, Hospital=QR, n Printer Name=Kodak, Show Monitor=On, Enable log=On n into Start/Programs/MedStation 3.5/Printer Server Configuration/Protocol set: n Protocol=Dicom 3, Address=accordingly, n if MIM200: Port=5040, Called AE Title=8700, n if 9410: Port=1024, Called AE Title=9410, n Calling AE Title=QR_DCMPRN1 n Save n into QR Application enter in Service Mode pressing CTRL-ALT-SHIFT-ESC n under File/Print Setup choose 3M protocol & DICOM

DICOM Network

Cable:Crossed Network 82002 x Fiber 8500,8700,969QR NewTom CT

Dental SystemsKodak cameras:- 8200- 8500 (and 8500 Dual)- 8700 (and 8700 Dual)- 969

Kodak DICOM Print Server:- MIM 200- 9410



n select DICOM Printer n for 14x17 Page Size (mm) X=319, Y=407, Page Size (pixel) X=4096, Y=5220 n for other filmsizes see correspondent data above reported n with Explorer look for NNT directory and open Dicomprn.ini and set: n NUMCOPIES=1, PRIORITY=MEDIUM, MEDIUM=BLUE FILM, n DESTINATION=PROCESSOR, SESSION=MedStation film, n ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=NONE, SMOOTHING=0, n MAXDENS=300, MINDENS=21 n CONFIGINFO=LUT=Pmsv3k.w87,9 n IMAGEFILE=C:\temp\printspool/F0000002.dcm n IMAGEROWS=5220, IMAGECOLS=4096 MIM200 Setup: n on Configure, Network:

n Computer Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly


n on Configure, Destination, Add, Print, Direct, Qualified, eg 8700, Set: n accept all defaults by pressing Next and at very end Finish. n General: Log.Name=eg 8700, IPAddr=100.100.100.40 (for 8200) n General: Database Name=eg 8700, Model=eg 8700, Memory=32 n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n accept all defaults by pressing Next and at very end pressing Finish

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=Y) n Smoothing Type=0 (Always=Y), Image Dmax=3.00 (Always=Y) n Image Dmin=0.00 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off


n Printer=eg 8700, Model=eg 8700, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87

n on Device Setup, SCP PRINTERS, Current Providers: n Printer=eg 8700, AE Title= 9410, Port= 1024, Max Associations= 5




n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=eg 8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

8700 / 8500 / 969 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM / SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025



QR CT dental NewTom 9000 / 3G via DICOM with Kodak DV8100, DV8300, DV8600 and DV8610 LASER IMAGER

Requirements: QR NewTom 9000 / 3G CT dental system DLL-DICOM v1.0.0.5 Requirements: MIM200 v6.1, 9410 v1.6 Requirements: 8100 v2.4.1, 8300 v4.9.1, 8600 v2.5, 8610 v2.4 Note: The below setup is basically also valid for 8300, 8600 and 8610

cameras by basically using the correspondent Model into MIM200 Destination or into 9410 Local Printers

Note: on QR only a DICOM camera could be installed Note: 8100 matrix 14x17=4096x5216 ie 319.49 x 406.85 mm Note: 8300 matrix 8x10 Portrait=2256x2676 ie 191.76 x 227. mm46 Note: 8300 matrix 8x10 Landscape=2736x2136 ie 232.56 x 181.5 mm6 Note: 8600/8610 matrix 8x10=5024x6200 ie 194.68 x 240.25 mm QR Setup: n into Start/Programs/MedStation 3.5/Printer Server Configuration/Configuration n set Spool path=C:\MEDST35\PRNSRV\SPOOL, Sleep=1, Hospital=QR, n Printer Name=Kodak, Show Monitor=On, Enable log=On n into Start/Programs/MedStation 3.5/Printer Server Configuration/Protocol set: n Protocol=Dicom 3, Address=accordingly, n if MIM200: Port=5040, Called AE Title=8100, n if 9410: Port=1024, Called AE Title=9410, n Calling AE Title=QR_DCMPRN1 n Save n into QR Application enter in Service Mode pressing CTRL-ALT-SHIFT-ESC n under File/Print Setup choose 3M protocol & DICOM n select DICOM Printer n for 14x17 Page Size (mm) X=319, Y=407, Page Size (pixel) X=4096, Y=5216 n for other filmsizes see correspondent data above reported n with Explorer look for NNT directory and open Dicomprn.ini and set: n NUMCOPIES=1, PRIORITY=MEDIUM, MEDIUM=BLUE FILM, n DESTINATION=PROCESSOR, SESSION=MedStation film,

DICOM Network

Copper Cable

Control 9-pininto 422 plug

Data 37-pin

QR NewTom CTDental Systems

Kodak cameras:- 8100- 8300- 8600- 8610

Kodak DICOM Print Server:- MIM 200- 9410



n ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=NONE, SMOOTHING=0, n MAXDENS=300, MINDENS=21 n CONFIGINFO=LUT=Pmsb.w87,9 n (if 8300: CONFIGINFO=LUT=u1_109s.w8u,10) n (if 8600/8610: CONFIGINFO=LUT=gsdfaa0p.w8u,3) n IMAGEFILE=C:\temp\printspool/F0000002.dcm n IMAGEROWS=5216, IMAGECOLS=4096 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, eg 8100, Set: n accept all defaults by pressing Next and at very end Finish. n General: Log.Name=eg 8100 n General: Database Name=eg 8100, Model=eg 8100, Memory=32 n Output Params: Pixel=12 (8 if 8300, 8600) n accept all defaults by pressing Next and at very end pressing Finish

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=Y) n Smoothing Type=0 (Always=Y), Image Dmax=3.00 (Always=Y) n Image Dmin=0.00 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off n (if 8300: TFT= u1_109s.w8u (Always=Y), Contrast=10 (Always=Y)) n (if 8600/8610: Contrast=3 (Always=Y), Dmax=3.50 (Always=Y), n Modality Group=6 (which corresponds to TFT/ULUT=gsdfaa0p.w8u), n Smoothing Type=1 (Always=Y), Conv.Group=1, Gamma=Transmittance)

9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=eg 8100, Model=eg 8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12 (8 if 8300,8600), Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831, Interp Num=2 n Max.Density=300, Contrast=6, Border Density=0, TFT/ULUT Emulation=On n Installed TFT/ULUT=Ver693c0.w87 (upmsv3k.w8u if 8300) on Device Setup, SCP PRINTERS, Current Providers: n Printer=eg 8100, AE Title=9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users:



n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=eg 8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 n (if 8300: Contrast Table=10, TFT/ULUT=u1_109b.w8u) n (if 8600/8610: Contrast Table=3, Max.Density=350, Smoothing=1, n Gamma=Transmittance, Contrast Group=6, Kernel Group=1) 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0

n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1 8600 / 8610 Setup: n on Operator Menu into Test Menu, Software Version, verify:

n if 8610: Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5)

n on Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care

n on Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=127 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1



QR CT dental NewTom 9000 / 3G via DICOM with Kodak 160, 1120, 2180 and 190 LASER IMAGER

Requirements: QR NewTom 9000 / 3G CT dental system DLL-DICOM v1.0.0.5 Requirements: MIM200 v6.1 Requirements: 160 v7.2, 1120 v2.40/032, 2180 v2.17H, 190 v1.7.29 Note: 190 is a built-in DICOM, therefore MIM200 is not needed Note: The below setup is basically also valid for 1120 and 2180 cameras by basically

using the correspondent Model into MIM200 Destination Note: on QR only a DICOM camera could be installed Note: 160 matrix 14x17=4360x5348 ie 340.08 x 417.14 mm Note: 190 matrix 14x17=4096x5120 ie 327.68 x 409.60 mm Note: 1120 matrix 14x17=4096x5132 ie 327.68 x 410.56 mm Note: 1120 matrix 14x14=4096x4108 ie 327.68 x 328.64 mm Note: 1120 matrix 11x14=4096x3232 ie 327.68 x 258.56 mm Note: 1120 matrix 8x10=2304x2900 ie 184.32 x 232.00 mm Note: 2180 matrix 14x17=4096x5156 ie 323.58 x 407.32 mm Note: 2180 matrix 14x14=4096x4132 ie 323.58 x 326.43 mm Note: 2180 matrix 11x14=3236x4132 ie 255.64 x 326.43 mm Note: 2180 matrix 8x10=2286x2836 ie 180.59 x 224.04 mm QR Setup: n into Start/Programs/MedStation 3.5/Printer Server Configuration/Configuration n set Spool path=C:\MEDST35\PRNSRV\SPOOL, Sleep=1, Hospital=QR, n Printer Name=Kodak, Show Monitor=On, Enable log=On n into Start/Programs/MedStation 3.5/Printer Server Configuration/Protocol set: n Protocol=Dicom 3, Address=accordingly, Port=5040, Called AE Title=160, n Calling AE Title=QR_DCMPRN1 n Save n into QR Application enter in Service Mode pressing CTRL-ALT-SHIFT-ESC n under File/Print Setup choose 3M protocol & DICOM n select DICOM Printer n for 14x17 Page Size (mm) X=340, Y=417, Page Size (pixel) X=4360, Y=5348 n for other filmsizes see correspondent data above reported


DICOM Network

Kodak cameras:- 160- 1120- 2180- 190 (no MIM200)

Kodak MIM 200

Cable:Crossed Network 160Fiber 1120, 2180



n with Explorer look for NNT directory and open Dicomprn.ini and set: n NUMCOPIES=1, PRIORITY=MEDIUM, MEDIUM=BLUE FILM, n DESTINATION=PROCESSOR, SESSION=MedStation film, n ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=NONE, SMOOTHING=NORMAL, n MAXDENS=300, MINDENS=21 n CONFIGINFO=CS435\CN0 n IMAGEFILE=C:\temp\printspool/F0000002.dcm n IMAGEROWS=5348, IMAGECOLS=4360 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 160 or 1120 or 2180, Set: n General: Log.Name=eg 160, Database Name=eg 160 n General: Model=eg 160, IPAddr=100.100.100.30 (for 160) n General: Memory=20 (1120) or 24 (2180), Node ID=6 or accordingly n accept all defaults by pressing Next and at very end pressing Finish

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Interpolation=Cubic, Image Dmax=3.00 (Always=Y) n Image Dmin=0.00 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None (Always=N) n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off

160 Setup: no modality-specific setup needed 1120 / 2180 Setup: Optical Interface board configures automatically, no setup needed 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Contrast Pivot Density=1.2 n Curve Shape=same as used into MIM, Contrast=same as used into MIM n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



QR CT dental NewTom 9000 / 3G via DICOM with Kodak DryView 8900 LASER IMAGER

Requirements: QR NewTom 9000 / 3G CT dental system DLL-DICOM v1.0.0.5 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: on QR only a DICOM camera could be installed Note: 8900 matrix 14x17=4488x5464 ie 350.75 x 427.03 mm Note: 8900 matrix 14x14=4488x4488 ie 350.75 x 350.75 mm Note: 8900 matrix 11x14=3514x4488 ie 274.63 x 350.75 mm Note: 8900 matrix 10x12=3184x3828 ie 248.84 x 299.17 mm Note: 8900 matrix 8x10=2528x3184 ie 197.57 x 248.84 mm QR Setup: n into Start/Programs/MedStation 3.5/Printer Server Configuration/Configuration n set Spool path=C:\MEDST35\PRNSRV\SPOOL, Sleep=1, Hospital=QR, n Printer Name=Kodak, Show Monitor=On, Enable log=On n into Start/Programs/MedStation 3.5/Printer Server Configuration/Protocol set: n Protocol=Dicom 3, Address=accordingly, Port=5040, Called AE Title=8900, n Calling AE Title=QR_DCMPRN1 n Save n into QR Application enter in Service Mode pressing CTRL-ALT-SHIFT-ESC n under File/Print Setup choose 3M protocol & DICOM n select DICOM Printer n for 14x17 Page Size (mm) X=351, Y=427, Page Size (pixel) X=4488, Y=5464 n for other filmsizes see correspondent data above reported n with Explorer look for NNT directory and open Dicomprn.ini and set: n NUMCOPIES=1, PRIORITY=MEDIUM, MEDIUM=BLUE FILM, n DESTINATION=PROCESSOR, SESSION=MedStation film, n ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=REPLICATE, SMOOTHING=0, n MAXDENS=300, MINDENS=21 n CONFIGINFO=LUT=Pmsv3k.w87,9 n IMAGEFILE=C:\temp\printspool/F0000002.dcm n IMAGEROWS=5464, IMAGECOLS=4488


DICOM Network

Kodak DryView 8900



8900 Setup: n on Configuration, System, Network:


n on Configuration, System, Software License: n License Status=Mammo Key is OFF



n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Pmsv3k.w87 (Always=Y), Contrast=9 (Always=Y) n Smoothing Type=0 (Always=Y), Image Dmax=3.00 (Always=Y) n Image Dmin=0.00 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=Y) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ws



QR CT dental NewTom 9000 / 3G via DICOM with Kodak DryView 8150 LASER IMAGER

Requirements: QR NewTom 9000 / 3G CT dental system DLL-DICOM v1.0.0.5 Requirements: 8150 v1.0.2.b04 (ie DRE v1.0.2.b04, MIM v5.7.b8) Note: on QR only a DICOM camera could be installed Note: 8150 matrix 14x17=4438x5390 ie 346.8 x 421.1 mm Note: 8150 matrix 14x14=4438x4414 ie 346.8 x 344.9 mm Note: 8150 matrix 11x14=3440x4438 ie 268.7 x 346.8 mm QR Setup: n into Start/Programs/MedStation 3.5/Printer Server Configuration/Configuration n set Spool path=C:\MEDST35\PRNSRV\SPOOL, Sleep=1, Hospital=QR, n Printer Name=Kodak, Show Monitor=On, Enable log=On n into Start/Programs/MedStation 3.5/Printer Server Configuration/Protocol set: n Protocol=Dicom 3, Address=accordingly, Port=5040, Called AE Title=DV8150, n Calling AE Title=QR_DCMPRN1 n Save n into QR Application enter in Service Mode pressing CTRL-ALT-SHIFT-ESC n under File/Print Setup choose 3M protocol & DICOM n select DICOM Printer n for 14x17 Page Size (mm) X=347, Y=421, Page Size (pixel) X=4438, Y=5390 n for other filmsizes see correspondent data above reported n with Explorer look for NNT directory and open Dicomprn.ini and set: n NUMCOPIES=1, PRIORITY=MEDIUM, MEDIUM=BLUE FILM, n DESTINATION=PROCESSOR, SESSION=MedStation film, n ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=NONE, SMOOTHING=0, n MAXDENS=300, MINDENS=21 n CONFIGINFO=LUT=Pmsb.w87,9 n IMAGEFILE=C:\temp\printspool/F0000002.dcm n IMAGEROWS=5390, IMAGECOLS=4438 8150 Setup:

DICOM Network

Kodak DryView 8150




n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly



n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT=Pmsb.w87 (Always=Y), Contrast=9 (Always=Y) n Smoothing Type=0 (Always=Y), Image Dmax=3.00 (Always=Y) n Image Dmin=0.00 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=No, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws



QR CT dental NewTom 9000 / 3G via DICOM with Kodak Color Medical Imager 1000

Requirements: QR NewTom 9000 / 3G CT dental system DLL-DICOM v1.0.0.5 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: on QR only a DICOM camera could be installed Note: CMI 1000 matrix Letter =2508x2954 ie 203.2 x 239.3 mm Note: CMI 1000 matrix A4 =2508x3134 ie 203.2 x 253.9 mm QR Setup: n into Start/Programs/MedStation 3.5/Printer Server Configuration/Configuration n set Spool path=C:\MEDST35\PRNSRV\SPOOL, Sleep=1, Hospital=QR, n Printer Name=Kodak, Show Monitor=On, Enable log=On n into Start/Programs/MedStation 3.5/Printer Server Configuration/Protocol set: n Protocol=Dicom 3, Address=accordingly, Port=5040, Called AE Title=CMI1000, n Calling AE Title=QR_DCMPRN1 n Save n into QR Application enter in Service Mode pressing CTRL-ALT-SHIFT-ESC n under File/Print Setup choose 3M protocol & DICOM n select DICOM Printer n for 8x10 if Letter n Page Size (mm) X=203, Y=239, Page Size (pixel) X=2508, Y=2954 n for 8x10 if A4 see correspondent data above reported n with Explorer look for NNT directory and open Dicomprn.ini and set: n NUMCOPIES=1, PRIORITY=MEDIUM, MEDIUM=BLUE FILM, n DESTINATION=PROCESSOR, SESSION=MedStation film, n ORIENTATION=PORTRAIT, SIZEID=8INX10IN n MAGNTYPE=NONE, SMOOTHING=0, n MAXDENS=300, MINDENS=21 n CONFIGINFO=LUT=Pmsv3k.w87,9 n IMAGEFILE=C:\temp\printspool/F0000002.dcm n IMAGEROWS=2954, IMAGECOLS=2508 CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):

DICOM Network


Kodak CMI 1000



at Local Panel, under Menu, Imager Setup: n Network Setup:










Specific Setup for Sectra Mammography MicroDose with LASER IMAGERS OEM Data Manufacturer Sectra Modality Mammography Model MicroDose Mammography sw version IDS5/mx V9.1 Implement. Class UID 1.2.752.24.3.3.25.7 Implement. Version Name WIPRISCU_9_10 Kodak Data DICOM-interface MIM internal / external or 9410 as below reported DICOM-intf sw version as below reported Printer model All cameras as below reported Printer sw version as below reported What’s new: The setup of a Kodak printer for a given OEM Modality was split in 2 separate documents: - the generic Setup Catalog for Kodak Cameras - the specific Setup Manual for a given OEM Modality





What’s inside this document: n OEM Modality Setup (ie how to configure,into the OEM console,the Kodak printer)....... 2 n DryView correspondance with Kodak Setup Catalog for DryView cameras..................... 3 n Image Quality setup into MIM (or 9410) for DryView cameras .................................. 4 n More info on OEM Modality when connected to DryView cameras.................................... 5 n Wet correspondance with Kodak Setup Catalog for Wet cameras...................................... 6 n Image Quality setup into MIM (or 190) for Wet cameras.................................................... 7 n More info on OEM Modality eg Page-Mode and IQ parameters sent out by OEM ............. 8 n Miscellaneous: Deviations from Kodak Setup Catalog / Known Problems / Notes............... 9 OEM Modality Setup ie how to configure into the OEM console the Kodak printer: Note: MIM setup is basically also valid for 9410 by using AE=9410, Port=1024 Note: 8900 8x10 parameters: Resolution <5056>, Size <197:248> Note: 8900 10x12 parameters: Resolution <6368>, Size <248:299> Sectra Setup: n into C:\Program Files\Sectra\IDS5\config\local_config\_all_\general\def n very carefully edit the file dicom_printer.def to configure 8610 printer. n copy and paste an existing printer and set parameters as per below example KODAK_8610_8x10 { node <IP-address accordingly> # Must be configured port <5040> # Must be configured Label <8610> # Must be configured called_app_title <8610> copies <1> priority <MED> medium_type <BLUE FILM> film_destination <PROCESSOR> film_orientation <PORTRAIT> film_size <8INX10IN> magnification_type <NONE> max_density <350> configuration_information <LUT=0,3> border_density <BLACK> empty_image_density <BLACK> trim <NO> polarity <NORMAL> Get_all_printer_status <1> Resolution <5024> Size <194:239>



}

DryView section: Setup for Kodak DryView cameras ie 8900, 8700, 8610, 8600, 8500, 8300, 8200, 8150, 8100 Correspondance with Kodak Setup Catalog for DryView cameras: Note: the Kodak Setup Catalog contains that part of a printer installation which is Generic, ie common to all DICOM connections independently from the Specific modality connected. Therefore, as first step, setup the printer as per the correspondent page of the Kodak Setup Catalog, and then, as second and final step, setup the Image Quality parameters as per the Setup Manual for the Specific OEM Modality here below reported. MIM (inside printer) 8900 into Kodak catalog see Setup as per page

19

MIM sw version 5.6.b5 Printer sw version Rev.E ie 2.11 MIM external 8610 (8600) into Kodak catalog see Setup as per page

18

MIM sw version 6.1 Printer sw version 2.4 (2.5) 9410 external 8610 (8600) into Kodak catalog see Setup as per page

10

9410 sw version 1.6 Printer sw version 2.4 (2.5)



Image Quality setup into MIM (or 9410) for DryView cameras: MIM (or 9410) Parameters

8900 8610, 8600


gsdfaa0p.w8u

(Y)

(gsdfaa0p.w8u) 6


3 (Y)

3 (Y)


350 (Y)

350 (Y)


0 (N)

1 (Y)


N N

8610 Convolution / Kernel Group Not available 1 8610 Gamma Table Not available Transmittance




Works the OEM Modality in Page-Mode? (Yes/No) Yes Note: see Page-Mode definition and matrixes into Kodak cameras setup catalog. Are Image Data lutted by the OEM Modality, ie Linear-in-Density LUT into Camera? (Yes/No)

No






Yes

LUT=0,3

LUT=0,3

Max. Density Yes 350 350 Magnification Yes CUBIC CUBIC Smoothing No PLUT No Illumination (PLUT) No Reflective Ambient Light (PLUT)

No



Miscellaneous: Deviations in respect to the printer setup reported into Kodak Catalog: e.g. disable N-Event ie NeventReports=No (Always=Y) Known Problems or Limitations: Notes:

Sirona workstation Sidexis with LASER IMAGER Products


Setup for Sirona workstation Sidexis with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (1) ................ 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual) (1) ................ 5 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8100 LASER IMAGER (1).......................................................................... 7 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8300 LASER IMAGER (1).......................................................................... 9 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (1) ...................................................................................................................... 11

n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak Digital Science 969 HQ LASER IMAGER (1) ..................................................... 13


Kodak Ektascan 160 LASER IMAGER (2) ..................................................................... 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 2180 LASER PRINTER (2) .................................................................. 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 1120 LASER PRINTER (2) .................................................................. 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /







n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Digital Science 969 HQ LASER IMAGER (2,3)............................................... 34


1 Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.5.1. 2 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 3 setup valid also for Kodak PACS LINK 25 PRINT SERVER.



Sidexis platform via DICOM with Kodak DryView 8300 LASER IMAGER

SironaDental SystemsSidexis platform

Kodak DryView 8300

DICOM Network

Requirements: Sirona Sidexis platform v5.5 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: 8300 Portrait matrix 8x10=2256x2676 Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 8300, Address=accordingly, Port=104, Called AE=K8300 n MatrixX=2736, MatrixY=2136, ResPrinter=300, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=LANDSCAPE, SIZEID=8INX10IN n MAGNTYPE=CUBIC, SMOOTHING=0, MAXDENS=300 n CONFIGINFO=LUT=0,10 8300 Setup: n on 8300 Operator Menu into Configure User set:


n Modality Group=0



Sidexis platform via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /




DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Sirona Sidexis platform v5.5, 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 8500, Address=accordingly, Port=1024, Called AE=9410 n MatrixX=3380, MatrixY=4280, ResPrinter=325, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=PORTRAIT, SIZEID=11INX14IN n MAGNTYPE=CUBIC, SMOOTHING=2, MAXDENS=300 n CONFIGINFO=LUT=0,9 9410 Setup: n on Device Setup, LOCAL PRINTERS:














DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Sirona Sidexis platform v5.5, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual camera

by basically using the correspondent Model into 9410 Local Printers Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 8700, Address=accordingly, Port=1024, Called AE=9410 n MatrixX=4096, MatrixY=5220, ResPrinter=325, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=CUBIC, SMOOTHING=2, MAXDENS=300 n CONFIGINFO=LUT=0,9 9410 Setup: n on Device Setup, LOCAL PRINTERS:














DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Sirona Sidexis platform v5.5, 9410 v1.6, 8100 v2.4.1 Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 8100, Address=accordingly, Port=1024, Called AE=9410 n MatrixX=4096, MatrixY=5216, ResPrinter=325, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=CUBIC, SMOOTHING=2, MAXDENS=300 n CONFIGINFO=LUT=0,9 9410 Setup:



on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low



n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0








DICOM Network

Control 9 pin

Data 37 pin


Requirements: Sirona Sidexis platform v5.5 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: 8300 Portrait matrix 8x10=2256x2676 Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 8300, Address=accordingly, Port=1024, Called AE=9410 n MatrixX=2736, MatrixY=2136, ResPrinter=300, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=LANDSCAPE, SIZEID=8INX10IN n MAGNTYPE=CUBIC, SMOOTHING=0, MAXDENS=300 n CONFIGINFO=LUT=0,10 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u



n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0







Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin


Requirements: Sirona Sidexis platform v5.5 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 8610, Address=accordingly, Port=1024, Called AE=9410 n MatrixX=6200, MatrixY=5024, ResPrinter=655, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=LANDSCAPE, SIZEID=8INX10IN n MAGNTYPE=CUBIC, SMOOTHING=4, MAXDENS=300 n CONFIGINFO=LUT=0,5 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly



n SCP=8610, Copies=1, Contrast Table=5, Max.Density=300 n Border Density=0, Mag.Type=8, Smoothing=4 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Gamma Table=Linear in Transmittance, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0











DICOM Network

Fiber Cable

Fiber Cable


Kodak M969 HQ

Requirements: Sirona Sidexis platform v5.5, 9410 v1.6, 969 v5.2 Note: other HQ matrixes 11x14=3020x3960, 8x10=2076x2788 Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 969, Address=accordingly, Port=1024, Called AE=9410 n MatrixX=4096, MatrixY=4992, ResPrinter=311.5, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=CUBIC, SMOOTHING=2, MAXDENS=300 n CONFIGINFO=LUT=0,9 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=969, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2



n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0




Sidexis platform via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: Sirona Sidexis platform v5.5, 190 v1.7.29 Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 190, Address=accordingly, Port=5040, Called AE=K190 n MatrixX=4096, MatrixY=5120, ResPrinter=317.5, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=CUBIC, SMOOTHING=NORMAL, MAXDENS=300 n CONFIGINFO=CS435\CN0 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



Sidexis platform via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: Sirona Sidexis platform v5.5 Requirements: MIM200 v6.1, KELI 160 v7.2 Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 160, Address=accordingly, Port=5040, Called AE=K160 n MatrixX=4360, MatrixY=5348, ResPrinter=325, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=CUBIC, SMOOTHING=NORMAL, MAXDENS=300 n CONFIGINFO=CS435\CN0 MIM200 Setup: n on Configure, Network:

n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly


n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On



n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e. 435 (Always=N), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off







DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200

Requirements: Sirona Sidexis platform v5.5 Requirements: MIM200 v6.1, 2180 v2.17H Note: other 2180 matrixes 14x14=4096x4132, 11x14=3236x4132, 8x10=2286x2836 Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 2180, Address=accordingly, Port=5040, Called AE=K2180 n MatrixX=4096, MatrixY=5156, ResPrinter=321.5, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=CUBIC, SMOOTHING=NORMAL, MAXDENS=300 n CONFIGINFO=CS435\CN0 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On



n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e. 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off







DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200

Requirements: Sirona Sidexis platform v5.5 Requirements: MIM200 v6.1, 1120 v2.40/032 Note: other 1120 matrixes 14x14=4096x4108, 11x14=4096x3232, 8x10=2304x2900 Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 1120, Address=accordingly, Port=5040, Called AE=K1120 n MatrixX=4096, MatrixY=5132, ResPrinter=317.5, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=CUBIC, SMOOTHING=NORMAL, MAXDENS=300 n CONFIGINFO=CS435\CN0 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On



n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e. 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off







Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: Sirona Sidexis platform v5.5, MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: other 8200 matrixes 14x14=4360x4244, 11x14=3272x4360 Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 8200, Address=accordingly, Port=5040, Called AE=K8200 n MatrixX=4360, MatrixY=5220, ResPrinter=325, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=CUBIC, SMOOTHING=2, MAXDENS=300 n CONFIGINFO=LUT=0,9 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On



n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off








DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Sirona Sidexis platform v5.5, MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into MIM200 Destination Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 8500, Address=accordingly, Port=5040, Called AE=K8500 n MatrixX=3380, MatrixY=4280, ResPrinter=325, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=PORTRAIT, SIZEID=11INX14IN n MAGNTYPE=CUBIC, SMOOTHING=2, MAXDENS=300 n CONFIGINFO=LUT=0,9 MIM200 Setup: n on Configure, Network:



n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None




n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=11INx14IN (Always=N), Negotiate Color Print=Off 8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60







DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Sirona Sidexis platform v5.5, MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual camera

by basically using the correspondent Model into MIM200 Destination Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 8700, Address=accordingly, Port=5040, Called AE=K8700 n MatrixX=4096, MatrixY=5220, ResPrinter=325, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=CUBIC, SMOOTHING=2, MAXDENS=300 n CONFIGINFO=LUT=0,9 MIM200 Setup: n on Configure, Network:



n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None




n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Disable Even, Timeout=60







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Sirona Sidexis platform v5.5, MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 8100, Address=accordingly, Port=5040, Called AE=K8100 n MatrixX=4096, MatrixY=5216, ResPrinter=325, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=CUBIC, SMOOTHING=2, MAXDENS=300 n CONFIGINFO=LUT=0,9 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On




n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0








DICOM Network

Control 9 pin

Data 37 pin


Requirements: Sirona Sidexis platform v5.5 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: 8300 Portrait matrix 8x10=2256x2676 Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 8300, Address=accordingly, Port=5040, Called AE=K8300 n MatrixX=2736, MatrixY=2136, ResPrinter=300, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=LANDSCAPE, SIZEID=8INX10IN n MAGNTYPE=CUBIC, SMOOTHING=2, MAXDENS=300 n CONFIGINFO=LUT=0,10 MIM200 Setup: n on Configure, Network:


n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60



n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify:

n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off




Sidexis platform via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: Sirona Sidexis platform v5.5 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 8610, Address=accordingly, Port=5040, Called AE=K8610 n MatrixX=6200, MatrixY=5024, ResPrinter=655, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=LANDSCAPE, SIZEID=8INX10IN n MAGNTYPE=CUBIC, SMOOTHING=4, MAXDENS=300 n CONFIGINFO=LUT=0,5 MIM200 Setup: n on Configure, Network:



n General: Log.Name=8610 (or 8600) n General: Database=8610 (or 8600), Model=8610 (or 8600), Mem=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600),Header/Line,Transfer=2000,Acq=60


Kodak DryView 8610

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin




n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= upmsv3kp.w8u (Always=N), Contrast (dry)=5 (Always=N) n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=4 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=sidex n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:









Kodak MIM 200

DICOM Network

Fiber Cable

Fiber Cable


Kodak M969 HQ

Requirements: Sirona Sidexis platform v5.5, MIM200 v6.1, 969 v5.2 Note: This setup is basically also valid for 25 PS computer Note: other HQ matrixes 11x14=3020x3960, 8x10=2076x2788 Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 969, Address=accordingly, Port=5040, Called AE=K969 n MatrixX=4096, MatrixY=4992, ResPrinter=311.5, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=CUBIC, SMOOTHING=2, MAXDENS=300 n CONFIGINFO=LUT=0,9 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 969, Set: n General: Log.Name=969 n General: Database Name=969, Model=969, Memory=32 n Media Info: Media=35x43cm, 4096x5002, 4912, Blue n Media Info: Media=11x14in, 3030x4096, 4006, Blue n Media Info: Media=8x10in, 2086x2929, 2839, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None



n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.3457 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 969 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Disable Even, Timeout=60




Requirements: Sirona Sidexis platform v5.5 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: other 8900 matrixes 14x14=4488x4488, 11x14=3514x4488 Note: other 8900 matrixes 10x12=3184x3828, 8x10=2528x3184 Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 8900, Address=accordingly, Port=5040, Called AE=8900 n MatrixX=4488, MatrixY=5464, ResPrinter=325, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=CUBIC, SMOOTHING=0, MAXDENS=300 n CONFIGINFO=LUT=0,9 8900 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any


DICOM Network

Kodak DryView 8900




n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Pmsv3k.w87 (Always=N), Contrast=9 (Always=N) n Smoothing Type=0 (Always=Y), Image Polarity (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ws




Requirements: Sirona Sidexis platform v5.5 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: other 8150 matrixes 14x14=4438x4414, 11x14=3440x4438 Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 8150, Address=accordingly, Port=5040, Called AE=DV8150 n MatrixX=4438, MatrixY=5390, ResPrinter=325, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=PORTRAIT, SIZEID=14INX17IN n MAGNTYPE=CUBIC, SMOOTHING=0, MAXDENS=300 n CONFIGINFO=LUT=0,9 8150 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On


DICOM Network

Kodak DryView 8150







Sidexis platform via DICOM with Kodak Color Medical Imager 1000

Requirements: Sirona Sidexis platform v5.5 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: CMI1000 matrixes A4=2508x3134 ie 203.2x253.9

8.5x11=2508x2954 ie 203.2x239.3 Sirona Setup: n into Sidexis application under Services/System Config/Service set: n Multiuser=On, Other communication partners=On n into Sidexis application under Services/System Config/Service/Partner/New set: n Name:PRNSRV, File MailBox: C:\MEDST\PrnSrv\Spool\Test.sdx n Patient Databank=On, Reworking of image sent=On, click OK, OK n into file C:MEDST\CONFIG\Prnsrv.cfg set: n PrinterName=Kodak 1000, Addr.=accordingly, Port=5040, Called AE=CMI1000 n MatrixX=3134, MatrixY=2508, ResPrinter=314, NUMCOPIES=1, n PRIORITY=HIGH, MEDIUM=BLUE FILM, DESTINATION=PROCESSOR n SESSION=Sidexis film, ORIENTATION=LANDSCAPE, SIZEID=8INX10IN n MAGNTYPE=CUBIC, SMOOTHING=2, MAXDENS=300 n CONFIGINFO=LUT=0,9 CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup:






DICOM Network

Kodak CMI 1000






SwissRay workstation SwissVision with LASER IMAGER Products


Setup for SwissRay workstation SwissVision with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER................................ ................................ ................................ ... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (1)................................ ......... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual) (1)................................ ......... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8100 LASER IMAGER (1)................................ ................................ .............................. 8 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8300 LASER IMAGER (1)................................ ................................ .............................. 10 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (1) ................................ ................................ ................................ ................................ ...... 12

n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak Digital Science 969 HQ LASER IMAGER (1) ................................ ................................ ........... 14

n Kodak Digital Science 190 MEDICAL LASER PRINTER................................ ................................ ... 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................ ................................ ........................... 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 2180 LASER PRINTER (2,3,4) ................................ ................................ ........................ 21 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 1120 LASER PRINTER (2,3,4) ................................ ................................ ........................ 24 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8200 LASER IMAGER (3,4,5)................................ ................................ .......................... 27 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (4,5) ................................ ....... 30 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual) (4,5) ................................ ....... 33 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8100 LASER IMAGER (4,5)................................ ................................ ............................ 36 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8300 LASER IMAGER (4,5)................................ ................................ ............................ 39 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (4,5) ................................ ................................ ................................ ................................ .... 42

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Digital Science 969 HQ LASER IMAGER (4,5) ................................ ................................ ......... 45

n Kodak DryView 8900 LASER IMAGER................................ ................................ ................................ ... 48 n Kodak DryView 8150 LASER IMAGER................................ ................................ ................................ ... 51 n Kodak Color Medical Imager 1000 ................................ ................................ ................................ ........... 54

1 Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. 2 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER.



SwissRay workstation via DICOM with Kodak DryView 8300 LASER IMAGER

Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: 8300 Landscape matrix 8x10=2136x2736 SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=8300, AE Title=8300, Hostname=eg 150.224.150.2, Port=104 - Resolution=8 bit, - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=8x10 Inches, DPI=300, - Max Printable Box Size: W=2256 x H=2676, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=8x10, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=8300, AE Title=8300, Hostname=eg 150.224.150.2, Port=104 - Resolution=8 bit, Magnification=Cubic - true size printing not supported by 8300: Film Size=8x10 Inches - Printable Box Size: W=2256 x H=2676, DPI=300 - Composed Print: Print all as one image=Off (film composer always disabled) - Add Black Borders=Off

Swissray Workstation

Kodak DryView 8300

DICOM Network



- Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1,2:1V (ie one above the other),2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=8x10, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - true size printing not supported by 8300: therefore

Print with Original Size= Off (true size printing always disabled) - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2: 2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off 8300 Setup: n on 8300 Operator Menu into Configure User set:


n Modality Group=4



SwissRay via DICOM with Kodak PACS LINK ACQUISITION SYSTEM 9410 Software v1.6 /


Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=8500, AE Title=9410, Hostname=eg 150.224.150.2, Port=1024 - Resolution=16 bit (or 8 bit), - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=11x14 Inches, DPI=325, - Max Printable Box Size: W=3380 x H=4280, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=11x14, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=8500, AE Title=9410, Hostname=eg 150.224.150.2, Port=1024




DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable



- Resolution=16 bit (or 8 bit), Magnification=Cubic - only for true size printing: Film Size=11x14 Inches (ie Print with Original Size=On) - Printable Box Size: W=3380 x H=4280, DPI=325 - Composed Print: Print all as one image=On (to enable film composer) - Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=11x14, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off 9410 Setup: n on Device Setup, LOCAL PRINTERS:

n Printer=8500, Model=8500, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n Installed TFT / ULUT=Ver693c0.w87, TFT / ULUT Emulation=Yes


n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8500, Copies=1, Contrast Table=2, TFT / ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0






Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual camera

by basically using the correspondent Model into 9410 Local Printers SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=8700, AE Title= 9410, Hostname=eg 150.224.150.2, Port=1024 - Resolution=16 bit (or 8 bit), - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=14x17 Inches, DPI=325, - Max Printable Box Size: W=4096 x H=5220, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=14x17, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=8700, AE Title=9410, Hostname=eg 150.224.150.2, Port=1024




DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable



- Resolution=16 bit (or 8 bit), Magnification=Cubic - only for true size printing: Film Size=14x17 Inches (ie Print with Original Size=On) - Printable Box Size: W=4096 x H=5220, DPI=325 - Composed Print: Print all as one image=On (to enable film composer) - Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=14x17, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off 9410 Setup: n on Device Setup, LOCAL PRINTERS:







SwissRay workstation via DICOM with Kodak PACS LINK ACQUISITION SYSTEM 9410 Software v1.6 /


Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: 9410 v1.6, 8100 v2.4.1 SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=8100, AE Title=9410, Hostname=eg 150.224.150.2, Port=1024 - Resolution=16 bit (or 8 bit), - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=14x17 Inches, DPI=325, - Max Printable Box Size: W=4096 x H=5216, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=14x17, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=8100, AE Title=9410, Hostname=eg 150.224.150.2, Port=1024 - Resolution=16 bit (or 8 bit), Magnification=Cubic - only for true size printing: Film Size=14x17 Inches (ie Print with Original Size=On) - Printable Box Size: W=4096 x H=5216, DPI=325 - Composed Print: Print all as one image=On (to enable film composer)



DICOM Network


Data 37-pin

RS4229-pole Plug



- Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=14x17, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2: 2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=90, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n Installed TFT / ULUT=Ver693c0.w87, TFT / ULUT Emulation=Yes on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=1, TFT / ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0

n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT= Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even





Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: 8300 Landscape matrix 8x10=2136x2736 SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=8300, AE Title= 9410, Hostname=eg 150.224.150.2, Port=1024 - Resolution=8 bit, - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=8x10 Inches, DPI=300, - Max Printable Box Size: W=2256 x H=2676, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=8x10, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=8300, AE Title=9410, Hostname=eg 150.224.150.2, Port=1024 - Resolution= 8 bit, Magnification=Cubic - only for true size printing: Film Size=8x10 Inches (ie Print with Original Size=On) - Printable Box Size: W=2256 x H=2676, DPI=300


Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin




- Composed Print: Print all as one image=On (to enable film composer) - Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=8x10, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=1, TFT/ULUT= wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0






Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=8610, AE Title= 9410, Hostname=eg 150.224.150.2, Port=1024 - Resolution=16 bit (or 8 bit, only 8 bit if 8600), - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=8x10 Inches, DPI=655, - Max Printable Box Size: W=5024 x H=6200, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=8x10, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=8610, AE Title=9410, Hostname=eg 150.224.150.2, Port=1024 - Resolution=16 bit (or 8 bit, only 8 bit if 8600), Magnification=Cubic - only for true size printing: Film Size=8x10 Inches (ie Print with Original Size=On)


Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin




- Printable Box Size: W=5024 x H=6200, DPI=655 - Composed Print: Print all as one image=On (to enable film composer) - Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=8x10, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off 9410 Setup:

n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr= accordingly n SCP=8610, Copies=1, Contrast Table=6 n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Density, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0




n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma = Xmittance, Image Size=Scale To Fit, Detector Size= don’t care






Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: 9410 v1.6, 969 v5.2 Note: other HQ matrixes 11x14=3020x3960, 8x10=2076x2788 SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=969, AE Title= 9410, Hostname=eg 150.224.150.2, Port=1024 - Resolution=16 bit (or 8 bit), - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=14x17 Inches, DPI=311.5, - Max Printable Box Size: W=4096 x H=4992, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=14x17, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=969, AE Title=9410, Hostname=eg 150.224.150.2, Port=1024 - Resolution=16 bit (or 8 bit), Magnification=Cubic - only for true size printing: Film Size=14x17 Inches (ie Print with Original Size=On) - Printable Box Size: W=4096 x H=4992, DPI=311.5 - Composed Print: Print all as one image=On (to enable film composer)



DICOM Network

Fiber Cable

Fiber Cable


Kodak M969 HQ



- Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=14x17, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off 9410 Setup: n on Device Setup, LOCAL PRINTERS:







SwissRay workstation via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: 190 rel. 1.7.29 SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=190, AE Title=190, Hostname=eg 150.224.150.2, Port=5040 - Resolution=8 bit, - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=14x17 Inches, DPI=317.5, - Max Printable Box Size: W=4096 x H=5120, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=14x17, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=190, AE Title=190, Hostname=eg 150.224.150.2, Port=5040 - Resolution= 8 bit, Magnification=Cubic - true size printing not supported by 190: Film Size=14x17 Inches - Printable Box Size: W=4096 x H=5120, DPI=317.5 - Composed Print: Print all as one image=Off (film composer always disabled) - Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size)


DICOM Network

Kodak 190 camera



- Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=14x17, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - true size printing not supported by 190: therefore Print with Original Size= Off (true size printing always disabled) - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=0.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



SwissRay workstation via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: MIM200 v6.1, KELI 160 v5.2 SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=160, AE Title=160, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit), - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=14x17 Inches, DPI=325, - Max Printable Box Size: W=4360 x H=5348, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=14x17, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=160, AE Title=160, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit), Magnification=Cubic - only for true size printing: Film Size=14x17 Inches (ie Print with Original Size=On) - Printable Box Size: W=4360 x H=5348, DPI=325 - Composed Print: Print all as one image=On (to enable film composer)


Kodak MIM 200

DICOM Network


Kodak 160 camera



- Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=14x17, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)



n Interpolation= Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: other 2180 matrixes 14x14=4096x4132, 11x14=3236x4132, 8x10=2286x2836 SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=2180, AE Title=2180, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit), - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=14x17 Inches, DPI=321.5, - Max Printable Box Size: W=4096 x H=5156, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=14x17, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=2180, AE Title=2180, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit), Magnification=Cubic - only for true size printing: Film Size=14x17 Inches (ie Print with Original Size=On) - Printable Box Size: W=4096 x H=5156, DPI=321.5


DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200



- Composed Print: Print all as one image=On (to enable film composer) - Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=14x17, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On



n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, Modality=OT (Always=N) n Border=3.99 (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off






Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: other 1120 matrixes 14x14=4096x4108, 11x14=4096x3232, 8x10=2304x2900 SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=1120, AE Title=1120, Hostname=eg 150.224.150.2, Port=5040 - Resolution=8 bit, - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=14x17 Inches, DPI=317.5, - Max Printable Box Size: W=4096 x H=5132, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=14x17, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=1120, AE Title=1120, Hostname=eg 150.224.150.2, Port=5040 - Resolution= 8 bit, Magnification=Cubic - only for true size printing: Film Size=14x17 Inches (ie Print with Original Size=On) - Printable Box Size: W=4096 x H=5132, DPI=317.5


DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200



- Composed Print: Print all as one image=On (to enable film composer) - Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=14x17, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On



n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: MIM200 v6.1, 8200 v3.5 Note: other 8200 matrixes 14x14=4360x4244, 11x14=3272x4360 SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=8200, AE Title=8200, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit), - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=14x17 Inches, DPI=325, - Max Printable Box Size: W=4360 x H=5220, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=14x17, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=8200, AE Title=8200, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit), Magnification=Cubic - only for true size printing: Film Size=14x17 Inches (ie Print with Original Size=On) - Printable Box Size: W=4360 x H=5220, DPI=325


Kodak MIM 200

DICOM Network


Kodak 8200 camera



- Composed Print: Print all as one image=On (to enable film composer) - Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=14x17, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)



n TFT/ULUT= Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smooth=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025



SwissRay via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into MIM200 Destination SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=8500, AE Title=8500, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit), - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=11x14 Inches, DPI=325, - Max Printable Box Size: W=3380 x H=4280, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=11x14, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=8500, AE Title=8500, Hostname=eg 150.224.150.2, Port=5040



DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Kodak MIM 200



- Resolution=16 bit (or 8 bit), Magnification=Cubic - only for true size printing: Film Size=11x14 Inches (ie Print with Original Size=On) - Printable Box Size: W=3380 x H=4280, DPI=325 - Composed Print: Print all as one image=On (to enable film composer) - Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=11x14, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set: n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y)



n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N), Border=3.99 (Always=N), n Film Base=Blue Film (Always=N), Film Size=11INx14IN (Always=N) n Negotiate Color Print=Off 8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60



SwissRay via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual camera

by basically using the correspondent Model into MIM200 Destination SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=8700, AE Title=8700, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit), - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=14x17 Inches, DPI=325, - Max Printable Box Size: W=4096 x H=5220, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=14x17, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=8700, AE Title=8700, Hostname=eg 150.224.150.2, Port=5040



DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Kodak MIM 200



- Resolution=16 bit (or 8 bit), Magnification=Cubic - only for true size printing: Film Size=14x17 Inches (ie Print with Original Size=On) - Printable Box Size: W=4096 x H=5220, DPI=325 - Composed Print: Print all as one image=On (to enable film composer) - Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=14x17, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y)



n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60





Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: MIM200 v6.1, 8100 v2.4.1 SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=8100, AE Title= 8100, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit), - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=14x17 Inches, DPI=325, - Max Printable Box Size: W=4096 x H=5216, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=14x17, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=8100, AE Title=8100, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit), Magnification=Cubic - only for true size printing: Film Size=14x17 Inches (ie Print with Original Size=On) - Printable Box Size: W=4096 x H=5216, DPI=325 - Composed Print: Print all as one image=On (to enable film composer)


Kodak DryView 8100

DICOM Network


Data 37-pin

RS4229-pole Plug

Kodak MIM 200



- Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=14x17, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off MIM200 Setup: n on Configure, Network:




n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Wrkstn2a.w87 (Always=Y), Contrast (dry)=1 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N)





n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT= Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even





Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: 8300 Landscape matrix 8x10=2136x2736 SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=8300, AE Title=8300, Hostname=eg 150.224.150.2, Port=5040 - Resolution=8 bit, - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=8x10 Inches, DPI=300, - Max Printable Box Size: W=2256 x H=2676, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=8x10, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=8300, AE Title=8300, Hostname=eg 150.224.150.2, Port=5040 - Resolution= 8 bit, Magnification=Cubic - only for true size printing: Film Size=8x10 Inches (ie Print with Original Size=On) - Printable Box Size: W=2256 x H=2676, DPI=300 - Composed Print: Print all as one image=On (to enable film composer)


Kodak DryView 8300

DICOM Network

Control 9 pin

Data 37 pin


Kodak MIM 200



- Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=8x10, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify:

n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= wrkstn83a.w8u (Always=Y), Contrast (dry)=1 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N)







SwissRay workstation via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=8610, AE Title=8610, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit, only 8 bit if 8600), - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=8x10 Inches, DPI=655, - Max Printable Box Size: W=5024 x H=6200, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=8x10, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=8610, AE Title=8610, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit, only 8 bit if 8600), Magnification=Cubic


DICOM Network

Control 9 pin

Data 37 pin


Kodak MIM 200



- only for true size printing: Film Size=8x10 Inches (ie Print with Original Size=On) - Printable Box Size: W=5024 x H=6200, DPI=655 - Composed Print: Print all as one image=On (to enable film composer) - Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=8x10, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off MIM200 Setup: n on Configure, Network:



n General: Log.Name=8610 (or 8600) n General: Database=8610 (or 8600), Model=8610 (or 8600), Mem=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600),Header/Line,Transfer=2000,Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= upmsv3kp.w8u (Always=N), Contrast (dry)=6 (Always=N) n Modality Group=1, Conv.Group=1, Gamma Table= Linear in Density



n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=swray n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:








Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: MIM200 v6.1, 969 v5.2 Note: other HQ matrixes 11x14=3020x3960, 8x10=2076x2788 SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=969, AE Title=969, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit), - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=14x17 Inches, DPI=311.5, - Max Printable Box Size: W=4096 x H=4992, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=14x17, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=969, AE Title=969, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit), Magnification=Cubic - only for true size printing: Film Size=14x17 Inches (ie Print with Original Size=On) - Printable Box Size: W=4096 x H=4992, DPI=311.5 - Composed Print: Print all as one image=On (to enable film composer)


DICOM Network

Fiber Cable

Fiber Cable

Kodak MIM 200


Kodak M969 HQ



- Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=14x17, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 969, Set: n General: Log.Name=969 n General: Database Name=969, Model=969, Memory=32 n Media Info: Media=35x43cm, 4096x5002, 4912, Blue n Media Info: Media= 11x14in, 3030x4096, 4006, Blue n Media Info: Media= 8x10in, 2086x2929, 2839, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.3457 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On



n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 969 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60




Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: other 8900 matrixes 14x14=9100x9084, 11x14=7136x9100 Note: other 8900 matrixes 10x12=6490x7764, 8x10=5164x6490 SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=8900, AE Title=8900, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit), - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=14x17 Inches, DPI=650, - Max Printable Box Size: W=9100 x H=11036, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=14x17, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=8900, AE Title=8900, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit), Magnification=Cubic - only for true size printing: Film Size=14x17 Inches (ie Print with Original Size=On) - Printable Box Size: W=9100 x H=11036, DPI=650 - Composed Print: Print all as one image=On (to enable film composer) - Add Black Borders=Off


DICOM Network

Kodak DryView 8900



- Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=14x17, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off 8900 Setup: n on Configuration, System, Network:

n Host Name=DV8900, IPAddr, Subnet Mask, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:



n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Wrkstn2a.w87 (Always=N), Contrast=2 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ws




Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: other 8150 matrixes 14x14=4438x4414, 11x14=3440x4438 SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=8150, AE Title=DV8150, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit), - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=14x17 Inches, DPI=325, - Max Printable Box Size: W=4438 x H=5390, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=14x17, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=8150, AE Title=DV8150, Hostname=eg 150.224.150.2, Port=5040 - Resolution=16 bit (or 8 bit), Magnification=Cubic - only for true size printing: Film Size=14x17 Inches (ie Print with Original Size=On) - Printable Box Size: W=4438 x H=5390, DPI=325 - Composed Print: Print all as one image=On (to enable film composer) - Add Black Borders=Off - Supported Formats (only if composer is not enabled):


DICOM Network

Kodak DryView 8150



- Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=14x17, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off 8150 Setup: n on Configuration, System, Network:




n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Wrkstn2a.w87 (Always=Y) n Contrast=1 (Always=N), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws



SwissRay workstation via DICOM with Kodak Color Medical Imager 1000

Requirements: SwissRay SwissVision v7.1 or v8.0 or v9.1 or v9.2 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: CMI1000 matrixes A4=2508x3134 and 8.5inx11in=2508x2954 SwissRay v7.1 Setup: - Note: the SwissRay print job is always in foreground (no background printing) - into DICOM/Print set: Local Settings: AETitle=SVISION_PR, Timeout=30 secs, - Printer: Add: - Name=1000, AE Title=CMI1000, Hostname=eg 150.224.150.2, Port=5040 - Resolution=8 bit, - to enable film composer-> Image Print Sequence: Print all as one Image=Yes - only for true size printing: Film Size=8x10 Inches, DPI=314, - Max Printable Box Size: W=2508 x H=3134, - Supported Formats (only if composer is not enabled) =Portrait: - 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Priority=Low, Film Size=8x10, Orientation=Portrait, - Print with Current C and B (ie Linear-in-Density LUT into Camera)=Yes, - Monitor Print Job=No, - only for true size printing: Print with Original Size=Yes - Layout (to be set for each film to be printed, only if no composer):1:1, 2:1V, 2:2 SwissRay v8.0 or v9.1 or v9.2 Setup: - into DICOM/Print set: - Printer: - Local Settings: AETitle=SVISION_PR, Timeout=30 secs - Add / Properties: - Name=1000, AE Title=CMI1000, Hostname=eg 150.224.150.2, Port=5040 - Resolution= 8 bit, Magnification=Cubic - only for true size printing: Film Size=8x10 Inches (ie Print with Original Size=On) - Printable Box Size: W=2508 x H=3134, DPI=314 - Composed Print: Print all as one image=On (to enable film composer) - Add Black Borders=Off - Supported Formats (only if composer is not enabled): - Portrait 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size)


DICOM Network

Kodak CMI 1000



- Landscape 1:1, 2:1V (ie one above the other), 2:2 (only if all images have same size) - Options: - Copies=1, Medium=Blue Film, Priority=Low, Film Size=8x10, Orient.=Portrait, - Print with Current B and C (ie Linear-in-Density LUT into Camera)=On - only for true size printing: Print with Original Size= On - Monitor Print Job=Off (better to not enable Camera Status reporting) - Print in Background=On (to create a background printing queue) - Layout: - (to choose film format for each film to be printed, only if composer=Off):1:1, 2:1V, 2:2 - Note: into Option/DICOM/Storage set Presentation State SOP enabled=Off CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup:





n Contrast=7 (Always=Y) n TFT Set (From list)=Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (Always=Y), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No



TheraView workstation with LASER IMAGER Products


Setup for TheraView workstation with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER (not possible yet) ............................................ 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /









Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)(1)................ 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)(1) .. 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Kodak DryView 8300 LASER IMAGER (1).................................................................... 22 n Kodak DryView 8900 LASER IMAGER......................................................................... 24 n Kodak DryView 8150 LASER IMAGER......................................................................... 26 n Kodak Color Medical Imager 1000 ................................................................................. 28

1 Setup valid also for Kodak PACS LINK 25 PRINT SERVER.



TheraView workstation via DICOM with Kodak DryView 8300 LASER IMAGER

Note: connection with 8300 standalone not possible yet

Requirements: TheraView v3.12 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname= Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=104, Calling AE Title=THERAVIEW, - Called AE Title=8300, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT 8300 Setup: n on 8300 Operator Menu into Configure User set:


n Modality Group=0

Kodak DryView 8300

DICOM Network

TheraView workstation



TheraView workstation via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Requirements: TheraView v3.12 Requirements: 190 rel. 1.7.29 TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname=Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=5040, Calling AE Title=THERAVIEW, - Called AE Title=190, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

DICOM Network

Kodak 190 cameraTheraView workstation



TheraView workstation via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: TheraView v3.12 Requirements: 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname= Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=1024, Calling AE Title=THERAVIEW, - Called AE Title=9410, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8500, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No


DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable










Requirements: TheraView v3.12 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname= Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=1024, Calling AE Title=THERAVIEW, - Called AE Title=9410, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No


DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable










Requirements: TheraView v3.12 Requirements: 9410 v1.6, 8100 v2.4.1 TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname= Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=1024, Calling AE Title=THERAVIEW, - Called AE Title=9410, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu:


DICOM Network


Data 37-pin

RS4229-pole Plug




n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0






Requirements: TheraView v3.12 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname= Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=1024, Calling AE Title=THERAVIEW, - Called AE Title=9410, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

8300 Setup:


DICOM Network

Control 9 pin

Data 37 pin





n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1



TheraView workstation via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: TheraView v3.12 Requirements: MIM200 v6.1, KELI 160 v7.2 TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname= Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=5040, Calling AE Title=THERAVIEW, - Called AE Title=160, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

Kodak MIM 200

DICOM Network





n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: TheraView v3.12 Requirements: MIM200 v6.1, 2180 rel. 2.17H TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname= Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=5040, Calling AE Title=THERAVIEW, - Called AE Title=2180, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On

Kodak MIM 200

DICOM Network

Fiber Cable




n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, Modality=OT (Always=N) n Border=3.99 (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off






Requirements: TheraView v3.12 Requirements: MIM200 v6.1, 1120 rel. 2.40/032 TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname= Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=5040, Calling AE Title=THERAVIEW, - Called AE Title=1120, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On

Kodak MIM 200

DICOM Network

Fiber Cable





n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: TheraView v3.12 Requirements: MIM 200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname= Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=5040, Calling AE Title=THERAVIEW, - Called AE Title=8200, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On

Kodak MIM 200

DICOM Network


Kodak DryView 8200




n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsb.w87 (Always=N), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=11 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: TheraView v3.12 Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into MIM200 Destination TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname= Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=5040, Calling AE Title=THERAVIEW, - Called AE Title=8500, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set: n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On


DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable




n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=N), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=11 (Always=N), Border=3.99 (Always=N), n Film Base=Blue Film (Always=N), Film Size=11INx14IN (Always=N) n Negotiate Color Print=Off






Requirements: TheraView v3.12 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname= Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=5040, Calling AE Title=THERAVIEW, - Called AE Title=8700, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On


DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable




n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=11 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: TheraView v3.12 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname= Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=5040, Calling AE Title=THERAVIEW, - Called AE Title=8100, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On


DICOM Network


Data 37-pin

RS4229-pole Plug












Requirements: TheraView v3.12 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname= Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=5040, Calling AE Title=THERAVIEW, - Called AE Title=8300, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On


DICOM Network

Control 9 pin

Data 37 pin





n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off





Requirements: TheraView v3.12 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname= Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=5040, Calling AE Title=THERAVIEW, - Called AE Title=8900, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT 8900 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4

DICOM Network

Kodak DryView 8900




n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT=Pmsv3k.w87 (Always=N), Contrast=9 (Always=N) n Smoothing Type=11 (Always=N), Image Polarity (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=N), Warnings=No n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws




Requirements: TheraView v3.12 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname= Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=5040, Calling AE Title=THERAVIEW, - Called AE Title=DV8150, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT 8150 Setup: n on Configuration, System, Network:




DICOM Network

Kodak DryView 8150







TheraView workstation via DICOM with Kodak Color Medical Imager 1000

Requirements: TheraView v3.12 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) TheraView Setup: - click on DICOM Network Transfer menu and set: - Hostname= Kodak, IP number=accordingly, Remote Port (SEND)=accordingly - Local Port (RECV)=5040, Calling AE Title=THERAVIEW, - Called AE Title=CMI1000, click on File and Save - click on Printer icon and under Printer Settings select: - Printer Name= Kodak, Type=DICOMPRINT CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup:





n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=11 (Always=Y), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N)

DICOM Network


Kodak CMI 1000



n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No n under Modality Defaults:

n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No


Trophy workstation Windows with LASER IMAGER Products


Setup for Trophy workstation Windows equipped with DICOM Print module with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /









Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)(1)................ 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)(1) .. 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Kodak DryView 8300 LASER IMAGER (1).................................................................... 22 n Kodak DryView 8900 LASER IMAGER......................................................................... 24 n Kodak DryView 8150 LASER IMAGER......................................................................... 26 n Kodak Color Medical Imager 1000 ................................................................................. 28

1 Setup valid also for Kodak PACS LINK 25 PRINT SERVER.



Trophy workstation via DICOM with Kodak DryView 8300 LASER IMAGER

Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Trophy Setup: - under Office/Working place/Configuration Panel /DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=8300, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=8300, - into Settings: IP Address=accordingly, Port=104 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=On, Accept 16 bits=Off, Support Color=Off - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 8300 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=8INX10IN - Magnif=Cubic, Smoothing=2, Trim=Off, Border=Black, Empty image=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=1:1, - also into Text select Add Patient Info=On and press OK to print the job 8300 Setup: n on 8300 Operator Menu into Configure User set:


n Modality Group=0

Kodak DryView 8300

DICOM Network

Trophy

Dental Systems

Windows DICOM platform



Trophy workstation via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: 190 rel. 1.7.29 Trophy Setup: - under Office/Working place/Configuration Panel/DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=190, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=190, - into Settings: IP Address=accordingly, Port=5040 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=On, Accept 16 bits=On, Support Color=Off - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 190 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=14INX17IN - Magnif=Cubic, Smoothing=NORMAL, Trim=Off, Border=Black, Empty=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=4:1, - also into Text select Add Patient Info=On and press OK to print the job 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

DICOM Network

Kodak 190 cameraTrophy

Dental Systems




Trophy workstation via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers Trophy Setup: - under Office/Working place/Configuration Panel /DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=8500, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=9410, - into Settings: IP Address=accordingly, Port=1024 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=On, Accept 16 bits=On, Support Color=Off - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 8500 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=11INX14IN - Magnif=Cubic, Smoothing=11, Trim=Off, Border=Black, Empty image=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=2:1, - also into Text select Add Patient Info=On and press OK to print the job 9410 Setup: n on Device Setup, LOCAL PRINTERS:



DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Trophy

Dental Systems











Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers Trophy Setup: - under Office/Working place/Configuration Panel /DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=8700, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=9410, - into Settings: IP Address=accordingly, Port=1024 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=On, Accept 16 bits=On, Support Color=Off - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 8700 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=14INX17IN - Magnif=Cubic, Smoothing=11, Trim=Off, Border=Black, Empty image=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=4:1, - also into Text select Add Patient Info=On and press OK to print the job 9410 Setup: n on Device Setup, LOCAL PRINTERS:



DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Trophy

Dental Systems











Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: 9410 v1.6, 8100 v2.4.1 Trophy Setup: - under Office/Working place/Configuration Panel /DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=8100, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=9410, - into Settings: IP Address=accordingly, Port=1024 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=On, Accept 16 bits=On, Support Color=Off - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 8100 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=14INX17IN - Magnif=Cubic, Smoothing=11, Trim=Off, Border=Black, Empty image=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=4:1, - also into Text select Add Patient Info=On and press OK to print the job 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly


DICOM Network


Data 37-pin

RS4229-pole Plug

Trophy

Dental Systems




n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0






Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Trophy Setup: - under Office/Working place/Configuration Panel /DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=8300, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=9410, - into Settings: IP Address=accordingly, Port=1024 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=On, Accept 16 bits=Off, Support Color=Off - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 8300 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=8INX10IN - Magnif=Cubic, Smoothing=2, Trim=Off, Border=Black, Empty image=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=1:1, - also into Text select Add Patient Info=On and press OK to print the job 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly


DICOM Network

Control 9 pin

Data 37 pin


Trophy

Dental Systems




n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0




Trophy workstation via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: MIM200 v6.1, KELI 160 v5.2 Trophy Setup: - under Office/Working place/Configuration Panel/DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=160, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=160, - into Settings: IP Address=accordingly, Port=5040 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=On, Accept 16 bits=On, Support Color=Off - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 160 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=14INX17IN - Magnif=Cubic, Smoothing=NORMAL, Trim=Off, Border=Black, Empty=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=4:1, - also into Text select Add Patient Info=On and press OK to print the job MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On

Kodak MIM 200

DICOM Network



Dental Systems




n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: MIM200 v6.1, 2180 rel. 2.17H Trophy Setup: - under Office/Working place/Configuration Panel/DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=2180, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=2180, - into Settings: IP Address=accordingly, Port=5040 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=On, Accept 16 bits=On, Support Color=Off - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 2180 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=8INX10IN - Magnif=Cubic, Smoothing=NORMAL, Trim=Off, Border=Black, Empty=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=1:1, - also into Text select Add Patient Info=On and press OK to print the job MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue)

Kodak MIM 200

DICOM Network

Fiber Cable


Dental Systems




n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, Modality=OT (Always=N) n Border=3.99 (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off






Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Trophy Setup: - under Office/Working place/Configuration Panel/DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=1120, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=1120, - into Settings: IP Address=accordingly, Port=5040 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=On, Accept 16 bits=On, Support Color=Off - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 1120 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=8INX10IN - Magnif=Cubic, Smoothing=NORMAL, Trim=Off, Border=Black, Empty=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=1:1, - also into Text select Add Patient Info=On and press OK to print the job MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)

Kodak MIM 200

DICOM Network

Fiber Cable


Dental Systems




n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: MIM 200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Trophy Setup: - under Office/Working place/Configuration Panel/DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=8200, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=8200, - into Settings: IP Address=accordingly, Port=5040 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=On, Accept 16 bits=On, Support Color=Off - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 8200 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=11INX14IN - Magnif=Cubic, Smoothing=11, Trim=Off, Border=Black, Empty image=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=2:1, - also into Text select Add Patient Info=On and press OK to print the job MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear)

Kodak MIM 200

DICOM Network


Kodak DryView 8200

Trophy

Dental Systems




n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7







Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into MIM200 Destination Trophy Setup: - under Office/Working place/Configuration Panel/DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=8500, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=8500, - into Settings: IP Address=accordingly, Port=5040 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=On, Accept 16 bits=On, Support Color=Off - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 8500 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=11INX14IN - Magnif=Cubic, Smoothing=11, Trim=Off, Border=Black, Empty image=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=2:1, - also into Text select Add Patient Info=On and press OK to print the job MIM200 Setup: n on Configure, Network:





DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Trophy

Dental Systems




n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=N), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=11 (Always=N), Border=3.99 (Always=N), n Film Base=Blue Film (Always=N), Film Size=11INx14IN (Always=N) n Negotiate Color Print=Off






Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination Trophy Setup: - under Office/Working place/Configuration Panel/DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=8700, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=8700, - into Settings: IP Address=accordingly, Port=5040 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=On, Accept 16 bits=On, Support Color=Off - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 8700 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=14INX17IN - Magnif=Cubic, Smoothing=11, Trim=Off, Border=Black, Empty image=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=4:1, - also into Text select Add Patient Info=On and press OK to print the job MIM200 Setup: n on Configure, Network:





DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Trophy

Dental Systems





n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=11 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off






Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Trophy Setup: - under Office/Working place/Configuration Panel/DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=8100, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=8100, - into Settings: IP Address=accordingly, Port=5040 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=On, Accept 16 bits=On, Support Color=Off - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 8100 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=14INX17IN - Magnif=Cubic, Smoothing=11, Trim=Off, Border=Black, Empty image=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=4:1, - also into Text select Add Patient Info=On and press OK to print the job MIM200 Setup: n on Configure, Network:





DICOM Network


Data 37-pin

RS4229-pole Plug

Trophy

Dental Systems












Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Trophy Setup: - under Office/Working place/Configuration Panel/DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=8300, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=8300, - into Settings: IP Address=accordingly, Port=5040 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=On, Accept 16 bits=Off, Support Color=Off - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 8300 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=8INX10IN - Magnif=Cubic, Smoothing=2, Trim=Off, Border=Black, Empty image=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=1:1, - also into Text select Add Patient Info=On and press OK to print the job MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue


DICOM Network

Control 9 pin

Data 37 pin


Trophy

Dental Systems




n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off





Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Trophy Setup: - under Office/Working place/Configuration Panel/DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=8900, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=8900, - into Settings: IP Address=accordingly, Port=5040 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=On, Accept 16 bits=On, Support Color=Off - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 8900 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=8INX10IN - Magnif=Cubic, Smoothing=11, Trim=Off, Border=Black, Empty image=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=1:1, - also into Text select Add Patient Info=On and press OK to print the job 8900 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On

DICOM Network

Kodak DryView 8900

Trophy

Dental Systems




n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT=Pmsv3k.w87 (Always=N), Contrast=9 (Always=N) n Smoothing Type=11 (Always=N), Image Polarity (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=N), Warnings=No n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws




Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Trophy Setup: - under Office/Working place/Configuration Panel/DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=8150, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=DV8150, - into Settings: IP Address=accordingly, Port=5040 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=On, Accept 16 bits=On, Support Color=Off - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 8150 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=11INX14IN - Magnif=Cubic, Smoothing=11, Trim=Off, Border=Black, Empty image=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=1:1, - also into Text select Add Patient Info=On and press OK to print the job 8150 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On

DICOM Network

Kodak DryView 8150

Trophy

Dental Systems








Trophy workstation via DICOM with Kodak Color Medical Imager 1000

Requirements: Trophy v6.0.2 equipped with DICOM Print module Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Trophy Setup: - under Office/Working place/Configuration Panel/DICOM Servers - on the top bar where all icons are, click on the icon Create and set: - into General: Name=1000, Description=don’t care, Status=On ie clicked - into Settings: Calling AE title=TROPHY, Called AE title=CMI1000, - into Settings: IP Address=accordingly, Port=5040 - into Services: Verification SOP Class=On, Print Management SOP Class=On - into Services: Support Greyscale=Off, Accept 16 bits=Off, Support Color=On - into Advanced: Verbose=Off, Debug=Off - to Print select an image and on top bar where all icons are, click on icon Print - select the Name of the printer eg 1000 and into Properties set: - Media Type=Blue Film, Destination=Processor, Film Size=8INX10IN - Magnif=Cubic, Smoothing=2, Trim=Off, Border=Black, Empty image=Black - also select Orientation=Portrait, Copies=1, Priority=MED, Layout=1:1, - also into Text select Add Patient Info=On and press OK to print the job CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup:





DICOM Network

Trophy

Dental Systems


Kodak CMI 1000






Documents

Other OEM Setup Manuals