Upload
hathu
View
213
Download
0
Embed Size (px)
Citation preview
TRU STEEL™ CARBIDE 132
TRU STEEL LT™ TOOL STEEL 134
WORLD ECONOMY™ CARBIDE 144
Orthodontic Instruments
130-150_Label_R4.indd 131 18/08/2009 9:51 AM
WWW.ORTHOSPECIALTIES.COM132
*General maintenance and resharpening is provided through the OEM (details provided with purchase).
Replaceable Insertsin either carbide (cutters) ortool steel (wire forminginstruments).
Hand Crafted Box Joint Construction the most reliable design possible.
Lifetime Warranty against forging breakage.
Hand-Crafted in the U.S.A. yourassurance of quality.
Lifetime Warranty against insert separation.
3 Year Warranty against wear.
TRU-STEEL™ ORTHODONTIC INSTRUMENTS
TRU-STEEL™ CARBIDECARBIDE INSERTED
HIGH QUALITY, RELIABLE INSTRUMENTS !Our newest instrument line.
TruSteel orthodontic instruments are one of our newest and most successful product introductions. As you probably know, it has become diffi cult to fi nd high quality, reliable instruments that hold up under the rigors of dry heat sterilization. Additionally, the diffi culties associated with repairing and resharpening instruments has cr eated a mentality that these expensiv e tools are essentially disposable.
We hope to reverse this trend by off ering instruments that are handcrafted by technicians with decades of exper ience in pro-ducing the highest quality orthodontic pliers. The full three-year manufacturer’s warranty covers any defect in materials, work-manship or per formance. Furthermore, these instruments car ry lifetime warranties against handle br eakage or tip separation from the body of the instrument*. Normal maintenance, such as tip resharpening or replacement following normal wear, is handled expertly and is generally completed within two weeks.
130-150_Label_R4.indd 132 18/08/2009 9:51 AM
ORDER TOLL FREE 1.800.637.1237 133
CUTTERS
Order Code 800-135LT
Standard Safety Hold Distal End Cutter
Industry standar d f or distal end cut -ters. Best suited for average sized hands. Safety Hold grips wires within 1/2mm of the buccal tube.
Order Code 800-137LT
.012” - .022” Maximum Capacity - .022” x .028”
.012” - .022” Maximum Capacity - .022” x .028”
Order Code 800-000
Mini Flush Cut Distal End Cutter
Small design allows f or easy access int o tight ar eas. C omfortable f or smaller handed individuals. Cuts and holds arch-wires within 1/2 mm of the buccal tube.
Order Code 800-121LT
.012” - .022” Maximum Capacity - .022” x .028”
Hard Wire Cutter
Standard siz e instrument with specially designed cutting edges to accommo-date the hea vy f orces of cutting har d wires, with the capabilit y of cutting liga-tures at the tip.
Order Code 800-123LT
Mini Pin and Ligature Cutter
Standard siz e instrument f or ev eryday use. Concave design front for maximum vision when cutting.
.010” - .020” - Soft Wires
.012” - .022” Maximum Capacity - .022” x .028”
Long Handle Distal End Cutter with Safety Hold
Long handle allows for lower cut-ting force and increased control when cutting distal to second mo-lar. Safety Hold grips wires within1/2mm of the buccal tube.
ALL TRUSTEEL CUTTING INSTRUMENTS FEATURE
CARBIDE INSERTED TIPS!
TRU-STEEL™ CARBIDECARBIDE INSERTED Made in the U.S.A.
TRU-STEEL™
INSTRU
MEN
TS
130-150_Label_R4.indd 133 18/08/2009 9:51 AM
WWW.ORTHOSPECIALTIES.COM134
WIRE FORMING
TRU-STEEL LT™TOOL STEEL INSERTED
Wire Specifi cations .020” - .032” .022” x .028”
The standard for orthodontic heavy wire bending. Made with fi ne detail and precise tip sizes. Tips are .035” round and square.
Order Code 800-139LT
Standard Bird Beak
Order Code 800-149LT
Wire Specifi cations .012” - .030” .022” x .028”
Bird Beak / Serrated Tip
Provides maximum grip and su-perb wir e contr ol. F eatures non-nicking, specially treated serrations. Full coned r ound beak f or retainer and clasp bending . .028” r ound and .035” square tips.
Wire Specifi cations .020” - .032” .022” x .028”
Order Code 800-151LT
Cutting Specifi cations .012” - .020” .022” x .028”
Light Wire Plier with Cutter / No Grooves
4mm longer w orking sur face than 800-139, this plier is per fect for cutting and bending hea vier wires. Tips ar e .035” r ound and square.
Order Code 800-152LT
Long Bird Beak with Cutter
Similar to 800-140 LT with the ad-dition of a superior quality cutter at the base of the jaw.
Order Code 800-153LT *Special Order Item - orders typically ship in two weeks.
Wire Specifi cations .014” - .020” .022” x .028”
Extra Long Bird Beak
This plier boasts ex tra long , nar -row beaks for precise wire bend-ing. A dditionally, this plier can double as a utilit y plier f or har d to r each ar eas. .030” r ound and square tips.
Wire Specifi cations .012” - .020” .016” x .022”
Precision tapered tips allow intri-cate detail work on archwires. Tip sizes are both .025.
Order Code 800-140LT
Light Wire Plier / No Grooves
Made in the U.S.A.
130-150_Label_R4.indd 134 18/08/2009 9:51 AM
ORDER TOLL FREE 1.800.637.1237 135
WIRE FORMING
Wire Specifi cations .022” x .028”
Wire Specifi cations .022” x .028”
Order Code 800-374
Torquing Plier Set
These pliers allow the application of torque without distortion in other segments of the wire. Non-slip grip tips facilitate the place-ment of labial or lingual torque.
Forms off sets and 90˚ bends on all t ypes of ar chwires. Thin ja ws are parallel at .020” opening.
Order Code 800-150LT
Tweed Arch Forming Plier
Order Code 800-145LT
Cutting Specifi cations .014” - .020” .022” x .028”
Tweed Loop Forming Plier
Form pr ecise, consist ent omega loops in r ound or r ectangular wires. Replaceable tip is precision ground to .045”, .060” and .093”.
Wire Specifi cations .018” - .032”
Wire Specifi cations .045” - .051
Order Code 800-264LT
Three Prong Plier / Large
Manufactured on a heavy lab forging, our heavy three prong pliers are built to bend big wires. Inserted and grooved tips pro-vide control when working with larger lab wires.
Standard size with inserted tips features a unique grooved de-sign to provide excellent control and prevent wire slippage.
Order Code 800-265LT
Three Prong Plier
TRU-STEEL LT™TOOL STEEL INSERTED Made in the U.S.A.
130-150_Label_R4.indd 135 18/08/2009 9:51 AM
WWW.ORTHOSPECIALTIES.COM136
UTILITY / SPECIAL PURPOSE
Wire Specifi cations .012” - 028” .022” x .028”
This multi-pur pose plier has 3.5mm tips with cr oss cut ser ra-tions f or super ior g rip. I nserted tips with non- contacting bow ed jaws won’t pinch the patient’s lip.
How Plier / Standard Tip
Wire Specifi cations .012” - .028” .022” x .028”
Weingart Plier / Standard Tip
Fully ser rated cr oss-cut beaks at the most con venient w orking angle. Also f eatures bowed jaws that won’t pinch the patient’s lip.
Wire Specifi cations .016” - .036” .022” x .028”
Order Code 800-226LT
Adams Plier
Based on the D eLarosa desig n, this plier f eatures pr ecision- ma-chined grooves of .016”, .018” and .025” for torque-free arch forms.
Order Code 800-267LT
Contouring Plier
Two .040” square beaks with parallel opening at 1mm.
Order Code 800-225LT Order Code 800-245LT
Wire Specifi cations .016” - .032”
Order Code 800-240LT
Wire Specifi cations .012” - .032” .022” x .028”
Jarabak Plier
Long taper ed desig n with fi ne detail w ork on ser rated tips al-lows for intricate bends and utility work. Tip sizes are .028” for round and half moon.
Wire Specifi cations .012” - .032” .022” x .028”
Stubby inser ted tips pr ovide su-perior gripping power for heavier wires. A g reat all ar ound utilit y plier.
Order Code 800-250LT
Weingart Plier / Heavy Tip
TRU-STEEL LT™TOOL STEEL INSERTED Made in the U.S.A.
130-150_Label_R4.indd 136 18/08/2009 9:51 AM
ORDER TOLL FREE 1.800.637.1237 137
SPECIAL PURPOSE / BANDING AND BONDING
Wire Specifi cations .012” - .020” .021” x .025”
Specifi cally designed for use with nickel titanium, this plier places a 1mm stop by slightly over bend-ing t o pr ovide a fl at hor izontal plane after spring back.
Stop Plier - Nickel Titanium Step Plier
Unique “football” shaped head design allows f or quick and easy placement of step bends without having to remove the wire.
Order Code 800-360
“Mershon” Band Pusher
The squar ed and ser rated tip provides a secur e g rip on band attachments, while the large han-dle pr ovides f or the fi rmest g rip possible. One piece fabr ication provides durability and complete sterilization.
Force Module Separating Plier
Order Code 800-220 LT
Posterior Band Remover / Standard
Inserted tip desig ned t o w edge under the band while 5mm r e-placeable t efl on bumper r ests on occlusal sur face for easy band removal.
Order Code 800-216
Tip desig n allows access t o r e-move adhesive in prac tically any area of the mouth. D ouble-end-ed car bide tip is r eplaceable f or repeated use. Tefl on bumper tip can be dry heat sterilized.
Order Code 800-222LT
Adhesive Removing Plier
Reverse action handles and long tapered tips mak e placing sepa-rating modules quick and easy.
Order Code 800-300LT
TRU-STEEL LT™INSTRUMENT LINE
1/4mm 800-2791/2mm 800-278 3/4mm 800-2761mm 800-277
Made in the U.S.A.
130-150_Label_R4.indd 137 18/08/2009 9:51 AM
WWW.ORTHOSPECIALTIES.COM138
BANDING / BONDING INSTRUMENTS
Conveniently angled head f or w ork-ing from behind patient when remov-ing brack ets. P recision edges allow for easy removal of brackets and ex-cess bonding material.
Order Code 800-260LT
Angulated Bracket Remover / Posterior
This positioning device allows the orthodontist t o pr ecisely gauge proper brack et height dur ing placement. (3.5, 4.0, 4.5, 5.0) .Metal-Autoclavable.
Order Code 800-351
Boone Bracket Gauge - Metal
Quality construc tion and desig n facilitates easy r emoval of bonded brackets without patient discom-fort. P recision diamond honed edges w ork w ell on all t ypes of brackets. 3mm tip width.
Order Code 800-261LT
Straight Bracket Remover / Anterior
This modifi ed version of a standard cotton tweezer features a cam-lock latch which locks the instrument in an open position for placement of elast omerics on brack ets. The easy lock -and-release mechanism pr ovides for fast and eff ective use.
Locking Ligature Tweezer
Operator controls the tension of this all-around utility tweezer. Its fi ne serrated tips allow you to use it for placing brackets, lingual buttons or just cotton rolls.
Cotton Placing Tweezer
Order Code 800-102
Order Code 800-344
TRU-STEEL LT™INSTRUMENT LINE Made in the U.S.A.
130-150_Label_R4.indd 138 18/08/2009 9:52 AM
ORDER TOLL FREE 1.800.637.1237 139
BANDING / BONDING INSTRUMENTS
TRU-STEEL LT™INSTRUMENT LINE
Order Code 800-335
Nylon Molar Band Seater
The tr iangular ser rated tip allows f or a positiv e grip on at -t a c h m e n t s , while the n y-lon handle may be used as a bit e stick to seat bands easily and evenly. F ully autoclavable.
Order Code 800-330
“Schure” Band Seater
This double ended instru-ment has a squar e and serrated end for pushing and seating molar bands , and a scaler on the opposing end f or clean-up or removal of adhesiv es and cements . One piece construction provides f or durability and thorough st er-ilization. Ser -rated handle for fi rm grip.
Order Code 800-317
Band Pusher / Director
Dual ended instru-ment f eatures both a band seater and a liga-ture director.
Order Code 800-331
Double Ended Band Pusher
Double ended instrument features t wo squar e ser -rated ends f or pushing and seating molar bands.
Double Ended Spatula
Make mixing and placing cement easier with our stainless steel double-ended spatula. This instrument features a cement placement instrument on the opposite end of the spatula.
Order Code 800-325
Made in the U.S.A.
130-150_Label_R4.indd 139 18/08/2009 9:52 AM
WWW.ORTHOSPECIALTIES.COM140
BANDING / BONDING INSTRUMENTS
TRU-STEEL LT™INSTRUMENT LINE
Deluxe Bracket Holder
This reverse action stain-less steel tweezer holds brackets and buccal tubes with thin, angled tips which are designed to slip under brack et and tube tie wings . I t is ideal f or miniature at-tachments.
Molar Tube Holder
The slim tips of this mo-lar tube holder slide into the buccal tube wir e slot f or easy placement of the buccal tube.
Self Locking Bracket
Holder with Aligner
Reverse action self-locking stainless steel tweezer incorporates a bracket aligner on the opposing end for the alignment/adjustment of bracket position by engaging the aligner in the bracket slot. Compatible with both .018 and .022 bracket systems.
Holds brack ets and buc-cal tubes without fi nger pressure f or easier bond-ing. The wide serrated tips provide f or a solid g rip without slippage . Rev erse action.
Order Code 800-311 Order Code 800-340 Order Code 800-343 Order Code 800-341
Standard Bracket Holder
Order Code 800-345
Bracket Positioner
This stainless steel positioning device features four bracket height measurements 3.5, 4.0, 4.5 and 5.0. Adjustable for use on both anterior and posterior teeth. Hinged tip adjustable to 45o. Works with .022 and .018 bracket systems.
Made in the U.S.A.
130-150_Label_R4.indd 140 18/08/2009 9:52 AM
ORDER TOLL FREE 1.800.637.1237 141
LIGATION
TRU-STEEL LT™INSTRUMENT LINE
Order Code 800-004 Order Code 800-006
Mathieu Needle Holder with Hook
This mathieu f eatures small , highly serrated tips with the addition of a hook at the tip desig ned t o a void slippage when engaging elastic ties and chain. Solid stainless steel.
Order Code 800-103
Ligature Mathieu
Narrow ligatur e mathieu pr ovides a tight g rip on elastic ties . Quick r e-lease lock. Stainless steel.
Hollowback Mathieu Needle Holder
Only the small , highly ser rated tips of this narrow Mathieu type needle holder meet, providing for the tight-est grip on elastic ties . I t is not r ec-ommended f or ligatur e wir e. Ger -man Stainless.
Carbide Inserted Mathieu
This instrument is recommended for all metal ligature tying. The carbide cross-cut serrations will last much longer than non-inserted instruments.
Order Code 800-101
Made in the U.S.A.
130-150_Label_R4.indd 141 18/08/2009 9:52 AM
WWW.ORTHOSPECIALTIES.COM142
LIGATION
TRU-STEEL LT™INSTRUMENT LINE
This hemostat is similar to the standard version below, with the addition of a hook at the tip designed to avoid slippage when engaging elastic ties and chain.
Order Code 800-110
Mosquito Hemostat with Hook
Stainless steel hemostat features thin, serrated tips and curved jaws.
Order Code 800-109
Mosquito Hemostat Curved Tip
This Stainless Steel hemostat with thin serrated tips is popular for placing elastomerics instruments.
Order Code 800-113
Mosquito Hemostat / Straight
Made in the U.S.A.
130-150_Label_R4.indd 142 18/08/2009 9:52 AM
ORDER TOLL FREE 1.800.637.1237 143
LIGATION
TRU-STEEL LT™INSTRUMENT LINE
Order Code 800-118
Speedy Ligature Tier
Designed f or fast er and easier placement of elastic ligature ties on all styles and siz es of brack -ets. Smooth, tips will not damage elastics.
Stainless Steel Elastic
Remover
Order Code 800-315
Double Ended Ligature
Director
For use when tuck ing or pushing elastics . The dual straight and cur ved ends allow for ease of intraoral placement and use. Solid stainless steel.
Double ended explorer is helpful when removing elastic chain and ligatur e ties. The tips are very du-rable. Tempered stainless steel.
Order Code 800-309 Order Code 800-316
Ligature Director and
Scaler
The dual ends of this in-strument ar e desig ned for tuck ing, pushing and removal of elastics . Solid stainless steel.
Double Ended Distal Bender -.022/.030
Double ended stainless steel distal bender features both an .022 end and an .030 end which allows you to use a single instru-ment to bend any size of wire.
Order Code 800-108
Made in the U.S.A.
130-150_Label_R4.indd 143 18/08/2009 9:52 AM
WWW.ORTHOSPECIALTIES.COM144
ECONOMICAL ORTHODONTIC INSTRUMENTS !For non-routine procedures.
World Economy™ orthodontic pliers, cutters and hand instruments are a quality, lower cost alternative when compared to our TruSteel LT™ and BarrStock™ lines. Our World Economy™ product line is a per fect solution for students or non-r outine clinical and laboratory procedures.
Carbide Inserted Tips
Stainless Steel
Brushed Satin Finish
Box Joint Design
90 Day Warranty*
high durability and superior performance
withstand rigors of repeated sterilization
provides for a corrosion resistant, non-glare surface
durable, allows for non-adjustable precisely aligned tips
protects against defects in material and workmanship
*Manufacturer warranties its instruments to be free of defects in material and workmanship for a period of one (1) y ear. Misuse, abuse or failure to properly maintain or care for the instrument will v oid warranty. Warranty does not cover routine maintenance, sharpening or r econditioning. Cutting instruments should be r econditioned every 6-9 months. In the event of a warranty claim the manufacturer reserves the option to repair or replace the instrument. If your instrument should require repair, return it postage-paid using a traceable method to Ortho Specialties with a copy of the original invoice. Ortho Specialties will not be responsible for the return shipment of repaired instruments.
Carbide Inserted Tipshighly durable yet canbe replaced over time.
Box Joint Constructionextremely durable joint requires no adjustment.
90 Day Warranty against defects in material or workmanship.
Stainless Steelprovides for a highly durable plier.
WORLD-ECONOMY™ ORTHODONTIC INSTRUMENTS
WORLD ECONOMY™ CARBIDE INSERTED
130-150_Label_R4.indd 144 18/08/2009 9:52 AM
ORDER TOLL FREE 1.800.637.1237 145
CUTTERS / WIRE FORMING
Order Code 801-140 Order Code 801-139
Cutting Specifi cations .010” - .014” Soft Wires
Cutting Specifi cations .012” - .028”
Cutting Specifi cations .012” - .014”
Order Code 801-137
Distal End Cutter / Long Handle
Our Long Handle Distal End Cutter has an ex-tended handle to facilitates access in hard to reach areas while easily cutting wire close to the buccal tube.
Order Code 801-121 *Special Order Item - orders typically ship in two weeks.
Hard Wire Cutter
Carbide inserted tips for cutting wires up to .028”.Carbide cutting inser ts facilitat e the effi cient cutting of pins and ligatures.
Order Code 801-120
Pin and Ligature Cutter
Light Wire Plier
Smooth cone and pyramid beak of .025 for bending of wires up to .030.
Bird Beak Plier
Long gradually tapered beaks for the bending of wires up to .016.
Cutting Specifi cations .012” - .014”
A compac t plier , our Small Distal End C utterfacilitates access t o har d t o r each ar eas whileeasily cutting wire close to the buccal tube.
Order Code 801-136
Distal End Cutter / Small
Wire Specifi cations .030”
Wire Specifi cations .016”
WORLD ECONOMY™ CARBIDE INSERTED
WO
RLD ECO
NO
MY™
INSTRU
MEN
TS
130-150_Label_R4.indd 145 18/08/2009 9:52 AM
WWW.ORTHOSPECIALTIES.COM146
WIRE FORMING / BANDING
Multi-purpose plier features serrated tips toprovide a positive grip on wires and auxiliaries.
Order Code 800-224
How Plier
Wire Specifi cations .012” - 028” .022” x .028”
Long, tapered design is ideal for precision bendingof lighter wires.
Order Code 801-240
Jarabak Plier
Wire Specifi cations .012” - .032” .022” x .028”
Wire Specifi cations .032”
Order Code 800-266
Three Jaw Plier
Medium size tips, for consistent bending of wir eup to .032”.
Serrated angled beaks hold items securely.
Order Code 800-246
Weingart Plier
Wire Specifi cations .032”
Order Code 801-260
Off set Direct Bond Bracket Remover
The tips of this dir ect bond brack et r emoverhave been specially desig ned at a con venientangle for removing brackets.
Specially desig ned tip w edges under theband while thereplaceable delr inbumper r ests onthe occlusal sur facefor easy band removal.
Order Code 801-220
Posterior Band Remover
WORLD ECONOMY™ CARBIDE INSERTED
130-150_Label_R4.indd 146 18/08/2009 9:52 AM
ORDER TOLL FREE 1.800.637.1237 147
BRACKETING / BANDING
Order Code 800-342
Fine Tip Bracket Tweezer
The fi ne, angled tips of this stainless st eel bracket and buccal tube holder allow f or precise positioning. Ser rated tips hel peliminate bracket slippage.
Order Code 800-310
Silicone Handle Elastic Remover
Same as 800-309 with the addition of a soft silicone handle for comfort.
Order Code 800-350
Boone Bracket Gauge / Plastic
Plastic positioning device allows the orthodontist to precisely gauge proper bracket height during placement. (3.5, 4.0, 4.5, 5.0). Non-autoclavable.
PROTECT YOUR INVESTMENT!
Tru-Solution™ Will Help You Take Care Of One Of Your Important Assets. Your Instruments. The Key to keeping orthodontic pliers and cutters in good working order is an eff ective cleaning and sterilization procedure. Tru-Solution™ is an essential component for maintain-ing the life of your hand instruments. Tru-Solution™ is a pH neutral ultrasonic solution that includes the following:
• Mild Detergent
• Quick Drying Agent
• Built-In Lubricant
• Corrosion Inhibitor
• No Rinse Formula
• 40:1 Ratio
Order Code 800-376
WORLD ECONOMY™ CARBIDE INSERTED
130-150_Label_R4.indd 147 18/08/2009 9:52 AM