Upload
julius-peters
View
216
Download
1
Tags:
Embed Size (px)
Citation preview
Organization of cabling informationCreating a Medaustron Cable Database
1
That’s what we don’t want!!
MACS 28/06/2011 Sebastien PelletierCabling Database
Aim
A Cable Data Base for what? For who??• Cable Data Base for Medaustron WP• Cable Data Base for installation Works and follow-up• Cable Data Base for upgrade of Medaustron
Definitions of data sets
Fill in all the informations
2MACS 28/06/2011 Sebastien Pelletier
Cabling Database
3
Definitions of data sets
name max length Excel Format Info given by Example Description
Common part
Medaustron cable name 13 Text WP-PELLETIER BD-04-023-CAS MedAustron identifierWorkpackage 4 Text WP BD MedAustron work package abbreviationCable Type 7 Text WP MCA24 nomenclature given by the CERN (see catalogue), creation of new type is possibleInstalled Cable Type 7 Text Cabling Firm MCA24 nomenclature given by the CERN (see catalogue), creation of new type is possibleLength of the cable 4 integer PELLETIER 100 Estimated cable length in metersInstalled length of the cable 4 integer Cabling Firm 100 Installed cable length in metersInstallation date Date Cabling Firm 15/06/2011 Date of cable installation in format DD/MM/YYYYInstallation responsible 50 Text Cabling Firm PELLETIER Person who is responsible for supervising the installationTest date Date Cabling Firm 15/06/2011 Date of the final test of the cable installation in format DD/MM/YYYYTest responsible 50 Text Cabling Firm PELLETIER Person who is responsible for supervising the testAcceptance date Date Medaustron 15/06/2011 Date when the acceptance test has been performed
Installation accepted by 50 Text Medaustron Identification of a person who checked that the cable was properly installed (format remains to be defined)
Description 45 Text WP WSX1 H1 MOTION Additional information about the cable
Cable tray road 1 - Integer PELLETIER 1001 refers to a route which is a set of cable traysCable tray road 2 - integer PELLETIER 1002 refers to a route which is a set of cable traysCable tray road 3 - integer PELLETIER 1003 refers to a route which is a set of cable trays
Part of 13 Text WP BD-04-022-CAS The indicated cable is part of the referenced cable. If this field is empty, this cable is a trunk cable.
Circuit Identifier 200 Text WP-PELLETIER Comma separated list of room and cable tray identifiers separated by slash
Common Information on each cable
MACS 28/06/2011 Sebastien PelletierCabling Database
4
Definitions of data sets
name max length
Excel Format Info given by Example Description
Termination A
Room name 20 Text WP 10-HT-006 Room name either following MedAustron naming convention identifiers or architecture engineer specified location
Assembly 13 Text WP BD-01-001-REL MedAustron name of the element that contains the device to which the cable is connected. Has to follow the MedAustron naming convention. May be empty if element is stand-alone.
Element 13 Text WP BD-BEE-MOT02_4WSX1 MedAustron name of the element thtat is a sub part of the assembly. Never empty. Has to follow the MedAustron naming convention.
ElementDescription 50 Text WP Provide additional non-formal information.Vpos 5 Text WP-PELLETIER 45U Vertical position on the equipment in a user defined unitPort name 15 Text WP SLOT3/DIO_2 Name of the connection endpoint on the element which must be unique per elementConnector type 7 Text WP 28BPMB nomenclature given by the CERN (see catalogue), creation of new type is possibleInstalled Connector type 7 Text Cabling Firm 28BPMB nomenclature given by the CERN (see catalogue), creation of new type is possibleInstallation date Date Cabling Firm 15/06/2011 Date of connector installation in format DD/MM/YYYYInstallation responsible 50 Text Cabling Firm PELLETIER Person who is responsible for supervising the connector installation
Connection type 20 Text WP May be one of "device", "crate" or "rack" to support RMS in looking up addition information about the connected endpoint
Connection mapping 7 Text WP BD01 Mapping scheme name of wires to pins on the plug or cable clamps
Same informations have to be provided for the Termination B
Information about termination of the cable
MACS 28/06/2011 Sebastien PelletierCabling Database
5
Fill in the information
Documents provided :• Template with all the information listed• Catalogues of cable type and connector type
What to do first and what to do if I don’t have all the information (cable or connector type for ex.)• List of equipement connected with a medaustron name• Type of signal (Optical, power, control…)
MACS 28/06/2011 Sebastien PelletierCabling Database
MACS 28/06/2011 Sebastien PelletierCabling Database6
What we expect to have