Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Eye & Hook (with thimble) = E/THThimble and Thimble = T/TThimble and Hook = T/THEye and Crescent Thimble = E/CTEye and Slip Thru Thimble = E/STThimble and Slip Thru Thimble = T/STCrescent Thimble and Hook = CT/THCrescent Thimble and Crescent Thimble = CT/CTSlip Thru Thimble and Hook = ST/THSlip Thru Thimble & Slip Thru Thimble = ST/ST
WORKSHEET-‐106a – Ordering Wire Rope Slings, Revision 1 – 4/28/14
Page 1 of 3
ORDERING WIRE ROPE SLINGSTO ORDER SLING, CREATE SPECIFICATION BY CREATING THEFOLLOWING SYSTEM:
Copyright © 2014 Industrial Splicing and Sling All Rights Reserved
OTHER WIRE ROPE CONFIGURATIONS
Sliding ChokerEye & ThimbleE/T/SCH
112 637 D EE X 12
Show termina^on orother styles (seebelow)Eye & Eye =EEBridles – 2 leg = 2LB 3 leg = 3LB 4 leg = 4LBEndless = ENBraids -‐ 3 part = 3PEE 6 part = 6PEE 7 part = 7PEE 8 part = 8PEE
Sling Length in Ft.(one or two digits) Referto drawings on back formeasuring sling length
Indicates that slinglength follows
619 refers to IWRC, EIPconstruc^on,637 for 6x37 construc^on,719 for 7x19 Galvanized
Define rope diameter(one to three digits)1 ½” shown in example
Domes^c = DImport = I
Notes:1. Proof tes^ng with cer^fica^on available for all slings at anaddi^onal charge2. Larger eyes are available at addi^onal charge3. Length Tolerance is plus or minus two sling diameters or .5% ofsling length (whichever is greater)4. The legs of bridle slings are matched and held to within (1) ropediameter.
Std. Eye
Hook
Std. Thimble
Crescent Thimble
Slip Thru Thimble
Slip Thru Thimble
Sliding ChokerEye & EyeE/E/SCH
The informa^on contained in this document was obtained from resources believed to be reliable at the ^me of publica^on. You assume the en^rerisk as to the use of this informa^on and Industrial Splicing and Sling assumes no liability in connec^on with the informa^on presented or the use ofsugges^ons in this publica^on. Refer to the full OSHA and ASME Standards addressing the topics discussed.
WORKSHEET-‐106a – Ordering Wire Rope Slings, Revision 1 – 4/28/14
Page 2 of 3
WIRE ROPE SLING CAPACITIES
The informa^on contained in this document was obtained from resources believed to be reliable at the ^me of publica^on. You assume the en^rerisk as to the use of this informa^on and Industrial Splicing and Sling assumes no liability in connec^on with the informa^on presented or the use ofsugges^ons in this publica^on. Refer to the full OSHA and ASME Standards addressing the topics discussed.
Copyright © 2014 Industrial Splicing and Sling All Rights Reserved
SAMPLE WIRE ROPE SLING SPECIFICATIONS1 637 D EE X 20:Is a 1” wire rope, 6x37 construc^on with eye and eye, 20 i. long, “Pull to Pull”
34 619 D E/TH X 12:Is a 3/4” wire rope, 6x19 construc^on with eye, thimble and hook, 12 i. long, “Pull to Pull”
20 Ft. “Pull to Pull”
12 Ft. “Pull to Pull”
* Rated capacity in tons of 2,000 lbs.
WORKSHEET-‐106a – Ordering Wire Rope Slings, Revision 1 – 4/28/14
Page 3 of 3
WIRE ROPE SLING BRIDLE CAPACITIES
The informa^on contained in this document was obtained from resources believed to be reliable at the ^me of publica^on. You assume the en^rerisk as to the use of this informa^on and Industrial Splicing and Sling assumes no liability in connec^on with the informa^on presented or the use ofsugges^ons in this publica^on. Refer to the full OSHA and ASME Standards addressing the topics discussed.
Copyright © 2014 Industrial Splicing and Sling All Rights Reserved
* Rated capacity in tons of 2,000 lbs.