· order is unique in it’s style, size, color, and quantity, as specified for your project. Production for most orders takes approximately 6-8 or 8-10 weeks, depending on quantity

SITE FURNISHINGS V.3

ORDERING INFORMATIONTOLL FREE MONDAY - FRIDAY 8AM - 5PM CSTTel. (888) 314-8852Or via email request to: [email protected]

TO SPECIFY PRODUCTSPRODUCT SERIES, STYLE/SIZE, & QUANTITYSeries # for style and size of product

CONCRETE COLOR SELECTION- Standard natural gray Or select integral color pigment from Davis Colors- Premium colors are additional, including blues, greens, and Davis graphite black- Visit Davis Colors* at www.daviscolors.com*Davis Colors is a trademark of Rockwood Pigments

DRAINAGE HOLE- Specify size (1”, 1.5”, or 2”) and quantity of holes needed- Or specify if no drain hole needed- Holes CANNOT be added in the field for concrete units

UNIT PRICING STRUCTUREINCLUDED IN YOUR PRICEConcrete Products:- Exterior and interior sealants- Cost of Davis subtle or standard integral pigment colors- Premium colors, including Graphite, are additional- White cement based products will include an upcharge per unit

Cor-Ten® Steel & Powder Coated Steel & Aluminum Products:- Temporary exterior sealant for Cor-Ten®- Cost of pre-weathering of units, unless otherwise noted- F&F stock powder coat finish - Leveling feet, glides, and industrial casters are additional

CUSTOM PROJECTSForm and Fiber occasionally works with designers to undertake custom projects. We understand the level of commitment required and the extended production periods needed for making your project successful. Please contact us to discuss the complexity of your project and our availability.

PRICING AND PURCHASESPricing provided upon request for all sizes and styles of planter pots, in US Dollars. Quotes will include applicable taxes, unless proof of resale is provided for tax exemption, plus packaging/palletizing costs. An estimate for freight can also be included in quotes if a delivery zip code is provided. Form and Fiber works with a variety of freight forwarders and will assist buyers in shipping options throughout Texas and the coastal US.

A minimum deposit of 50% is required to initiate the production of an order. Once production begins, deposits are non-refundable and receipt of deposit indicates acceptance of Form and Fiber Inc.’s Terms and Conditions. Payment of final balance is required to schedule a ship date for all orders.

PRODUCTION AND SHIPPINGForm and Fiber Inc. does not stock pre-manufactured inventory. Each order is unique in it’s style, size, color, and quantity, as specified for your project. Production for most orders takes approximately 6-8 or 8-10 weeks, depending on quantity ordered and production already in process. A more specific production time frame can be given at time of order and Form and Fiber will coordinate targeted ship dates closely with the Purchaser. Products to be exported outside of the US are subject to longer shipping times.

FORM AND FIBER, INC. | SITE FURNISHINGS

SABINE FRAME SYSTEMS

CUSTOMIZABLE LAYOUT CONFIGURATIONS

SABINE FRAME_3-SIDED SABINE FRAME_2-SIDED “L”SABINE FRAME_2-SIDED PARALLELSABINE FRAME_4-SIDED

- All Sabine Frame Systems are manufactured using 1/4” thick Powder Coated Steel. - Manufacturer can customize overall configuration per Designer specification.- Radial and arch wood bench layouts are not available within this design series.- Connecting hardware for the internal connection of section brackets is provided by Manufacturer. - Both Ipe and Cumaru wood options are available. Manufacturer wil also consider optional use of different wood species as specified by Designer, depending on availability of dimensional lumber sizing and sourcing.

PRODUCT ID LENGTH SEAT DEPTH HEIGHT WALLS SEAT BASE

ESTIM. WT. FRAME

SIDE (FS)

ESTIM. WT. BENCH

SIDE (BS)

SAB_FR_4’ L 48” 18” 18” pc steel 1x6 ipe 6” base plate 140 lbs 200 lbs







* All Sabine Frames are fully CUSTOMIZABLE up to 10’L sides.

* All Sabine Frames are manufactured with base plate that include optional pilot holes for anchor to sub-base by installing contractor

IPE WOOD SEAT | POWDER COATED STEEL BASE

SABINE FRAME SERIES STANDARD SIZES

(Above) Center City District, East Lansing, MI | Design: BKV Group - Minneapolis, MN


FRAME & RETAINING SYSTEMS

- Frame / Retaining Systems are available in Pre-Weathered Corten Steel and Powder Coated Steel and Aluminum. - Frame / Retaining Systems are priced based on length of runs, specified widths, heights, and metal thickness.- Connecting hardware for the internal connection of section brackets is provided by Manufacturer.- Any anchoring hardware for anchoring of planter frames to sub-base is provided by Installing Contractor.

FRAME & RETAINING SERIES CORTEN STEEL | POWDER COATED STEEL | ALUMINUM

(Above) Corporate Campus | Design: OJB - Dallas & Houston TX (At Right) Westbend | Design: Dunaway Associates - Fort Worth TX

ENCLOSED FRAME SYSTEM (BOTTOMLESS PLANTER) INTERNAL VIEW OF FRAME SECTION

STANDARDS- Standard lip for 10 ga thickness = 1-1/2” wide lip + 3/4” return- Standard lip for 1/4” thickness = 2” wide lip with no return- Optional No Lip “Blade Edge”


- All Fused Box Systems are available in Pre-Weathered Corten Steel and Powder Coated Steel and Aluminum. - All Fused Box Systems are priced based on length of runs, specified widths, heights, and metal thickness.- Connecting hardware for the internal connection of section brackets is provided by Manufacturer.

(Above) Early Fabrication Tack-Up and Leveling for Multiple Piece Fused Box System

FUSED BOX SYSTEMS

**NOTE: FUSED BOX SYSTEMS ARE FULLY CUSTOMIZABLE AND CAN BE FABRICATED TO DESIGNER SIZE SPECIFICATION.

FUSED BOX SERIES CORTEN STEEL | POWDER COATED STEEL | ALUMINUM

STANDARDS- Standard lip for 12 ga thick boxes = 1” wide lip + 3/4” return- Standard lip for 10 ga thick boxes = 1-1/2” wide lip + 3/4” return- Standard lip for 1/4” thick boxes = 2” wide lip with no return- Optional No Lip “Blade Edge”

(Above) Christ Hospital - Liberty Township OH | Design: GBBN Architects - Cincinnati OH


METAL BOX SERIES

CORTEN STEELPRODUCT ID

POWDER COATED STEEL PRODUCT ID

ALUMINUMPRODUCT ID LENGTH WIDTH HEIGHT

BX_C 242418 BX_S 242418 BX_A 242418 24” 24” 18”

BX_C 242424 BX_S 242424 BX_A 242424 24” 24” 24”

BX_C 242436 BX_S 242436 BX_A 242436 24” 24” 36”

BX_C 303018 BX_S 303018 BX_A 303018 30” 30” 18”

BX_C 303024 BX_S 303024 BX_A 303024 30” 30” 24”

BX_C 303030 BX_S 303030 BX_A 303030 30” 30” 30”

BX_C 363624 BX_S 363624 BX_A 363624 36” 36” 24”

BX_C 363630 BX_S 363630 BX_A 363630 36” 36” 30”

BX_C 363636 BX_S 363636 BX_A 363636 36” 36” 36”

BX_C 481824 BX_S 481824 BX_A 481824 48” 18” 24”

BX_C 482424 BX_S 482424 BX_A 482424 48” 24” 24”

BX_C 482430 BX_S 482430 BX_A 482430 48” 24” 30”

BX_C 484836 BX_S 484836 BX_A 484836 48” 48” 36”

BX_C 484848 BX_S 484848 BX_A 484848 48” 48” 48”

BX_C 601824 BX_S 601824 BX_A 601824 60” 18” 24”

BX_C 602424 BX_S 602424 BX_A 602424 60” 24” 24”

BX_C 602430 BX_S 602430 BX_A 602430 60” 24” 30”

BX_C 601836 BX_S 601836 BX_A 601836 60” 18” 36”

BX_C 721824 BX_S 721824 BX_A 721824 72” 18” 24”

BX_C 722424 BX_S 722424 BX_A 722424 72” 24” 24”

BX_C 722430 BX_S 722430 BX_A 722430 72” 24” 30”

BX_C 722436 BX_S 722436 BX_A 722436 72” 24” 36”

BX_C 724848 BX_S 724848 BX_A 724848 72” 48” 48”

BX_C 961818 BX_S 961818 BX_A 961818 96” 18” 18”

BX_C 961824 BX_S 961824 BX_A 961824 96” 18” 24”

METAL BOX SERIES STANDARD SIZES CORTEN STEEL | POWDER COATED STEEL | ALUMINUM

STANDARDS- Standard lip for 14 ga & 12 ga thick boxes = 1” wide lip + 3/4” return- Standard lip for 10 ga thick boxes = 1-1/2” wide lip + 3/4” return- Standard lip for 1/4” thick boxes = 2” wide lip with no return- Optional No Lip “Blade Edge”

OPTIONSThe following options are available in the fabrication of F&F metal box series. Additional charges may apply:

- Standard lip - Blade edge - Flat base

- Toe-kick base - Internally raised base

- Glides - Industrial casters

- Stainless steel leveling feet

(Above) The Katy Apartments | Design: StudioOutside - Dallas TX (Bottom Left) Corporate Campus - Plano TX(Bottom Right) Abrams Road | Design: Schrickel Rollins | PSC

**NOTE: BOXES ARE FULLY CUSTOMIZABLE AND CAN BE FABRICATED TO DESIGNERSIZE SPECIFICATION.


CONCRETE BOX SERIES

CONCRETE BOX SERIES STANDARD SIZESWALL THICKNESS & SIZE LIMITATIONS1. The standard wall thickness cast for Form and Fiber’s boX planters is as follows: - 3.0” Minimum wall thickness for planters up to 6’-0” L (72”) - 3.5” thickness for planters over 6’-0” L (72”) and up to 8’-0” L (96”) - 4.0” thickness may be used per manufacturer discretion - Limitations in size will apply over 8’-0” L and/or over 4,000 lbs.2. Form and Fiber is able to cast a variety of sizes of boardform planters, however, limitations do apply. - 8’-0” MAXIMUM LENGTH with a MAXIMUM WIDTH of 4’-0” or less

**NOTE: CONCRETE BOX PLANTERS ARE FULLY CUSTOMIZABLE AND CAN BE FABRICATED TO DESIGNER SIZE SPECIFICATION WITHIN MANUFACTURER LIMITATIONS. NON-STANDARD SIZES WILL REQUIRE A ONE-TIME MOLD UPCHARGE.

(Top Left) The Douglas | Design: TBG Partners Dallas TX (At Right) Frisco Cinemark The Cut | Design: Kimley Horn - Frisco TX

PRODUCT ID LENGTH WIDTH HEIGHT MATERIAL THICK-NESS AVG. WT.

BX_CON 202014 20” 20” 14” concrete 3 IN. 385 lbs















CONCRETE BOARDFORM SERIES

PRODUCT ID LENGTH WIDTH HEIGHT MATERIAL THICKNESS AVG. WT.

BX_BF 723018 72” 30” 18” concrete 3 IN. 1468 lbs














MEDIUM JOINTS

TIGHT JOINTS

FINGER JOINTS

WALL THICKNESS & SIZE LIMITATIONS1. The standard wall thickness cast for Form and Fiber’s boardform planters is as follows: - 3.0” Minimum wall thickness for planters up to 6’-0” L (72”) - 3.5” thickness for planters over 6’-0” L (72”) and up to 8’-0” L (96”) - 4.0” thickness may be used per manufacturer discretion - Limitations in size will apply over 8’-0” L and/or over 4,000 lbs.2. Form and Fiber is able to cast a variety of sizes of boardform planters, however, limitations do apply. - 8’-0” MAXIMUM LENGTH with a MAXIMUM WIDTH of 4’-0” or less

**NOTE: IF NOT SPECIFIED, 6” NOMINAL BOARDS + MEDIUM JOINTS ARE USED AS THE STANDARD DEFAULT FOR FABRICATION. BOARD SIZES WILL BE RIPPED TO MEET SPECIFIED JOINT SIZE AND OVERALL HEIGHT OF UNIT. **NOTE: CONCRETE BOARDFORM PLANTERS ARE FULLY CUSTOMIZABLE AND CAN BE FABRICATED TO DESIGNER SIZE SPECIFICATION WITHIN MANUFACTURER LIMITATIONS.

CONCRETE BOARDFORM SERIES STANDARD SIZES

(At Right) Porto Restaurant - Boston MA | Design: Elizabeth Dudley LA


(Top Left) Garland City Hall | Design: DCBA Plano TX (Bottom Left) CityLine Apartments | Design: StudioOutside - Dallas TX(Bottom Right) Victory Block G | Design: StudioOutside - Dallas TX(Far Right; Right Page) Private Residence | Design: Archiverde Landscape Architecture - Dallas TX

CONCRETE ESSENTIALS SERIES


ES_40 26” 26” 40” concrete 3 IN. 900 lbs



ES_24.2 48” 48” 24” concrete 3 IN. 1350 lbs





ESSENTIALS SERIES CONCRETE STANDARD SIZES


METAL ESSENTIALS SERIES

PRODUCT ID LENGTH WIDTH HEIGHT MATERIAL THICKNESS AVG. WT. PRODUCT ID MATERIAL THICKNESS AVG. WT. PRODUCT ID MATERIAL THICKNESS AVG. WT.

ES_40C 26” 26” 40” corten steel 12 GA. 129 lbs ES_40S pc steel 12 GA. 129 lbs ES_40A aluminum 0.125 52 lbs



ES_24.2C 48” 48” 24” corten steel 12 GA. 180 lbs ES_24.2S pc steel 12 GA. 180 lbs ES_24.2A aluminum 0.125 72 lbs





ESSENTIALS SERIES CORTEN STEEL | POWDER COATED STEEL | ALUMINUM STANDARD SIZES

**NOTE: METAL ESSENTIALS SERIES ARE FULLY CUSTOMIZABLE AND CAN BE FABRICATED TO DESIGNER SIZE SPECIFICATION.


CONCRETE CYPRESS SERIES

PRODUCT ID TOP O.D. HEIGHT BASE O.D. MATERIAL THICKNESS AVG. WT.

CY_40 26” 40” 16” concrete 3 IN. 680 lbs



CY_18 42” 18” 26” concrete 3 IN. 578lbs


CY_15.2 30” 15” 15” concrete 3 IN. 365 lbs

CY_40.2 60” 40” 30” - SIZE NOT AVAILABLE IN CONCRETE -

CY_36 48” 36” 24” - SIZE NOT AVAILABLE IN CONCRETE -

CY_28 72” 28” 42” - SIZE NOT AVAILABLE IN CONCRETE -

CY_18.2 72” 18” 48” - SIZE NOT AVAILABLE IN CONCRETE -

CYPRESS SERIES CONCRETE STANDARD SIZES

(Top Left) Brickyard Apartments | Design: StudioOutside - Dallas TX


PRODUCT ID TOP O.D. HEIGHT BASE O.D. MATERIAL THICKNESS AVG. WT. PRODUCT ID MATERIAL THICKNESS AVG. WT. PRODUCT ID MATERIAL THICKNESS AVG. WT.

CY_40C 26” 40” 16” corten steel 12 GA. 91 lbs CY_40S pc steel 12 GA. 91 lbs CY_40A aluminum 0.125 36 lbs

CY_40.2C 60” 40” 30” corten steel 12 GA. 222 lbs CY_40.2S pc steel 12 GA. 222 lbs CY_40.2A aluminum 0.125 89 lbs








CY_15C 22” 15” 10” - SIZE NOT AVAILABLE IN METAL - CY_15S - SIZE NOT AVAILABLE IN METAL - CY_15A - SIZE NOT AVAILABLE IN METAL -

METAL CYPRESS SERIES

(Above) City of Ennis Downtown RevitalizationDesign: MESA - Dallas TX

(At Right) Hudson Yards Design: Nelson Byrd Woltz - New York NY

CYPRESS SERIES CORTEN STEEL | POWDER COATED STEEL | ALUMINUM STANDARD SIZES


CONCRETE BLOC SERIES


BLOC_BF-SM 34” 34” 18” concrete 3 IN. 612 lbs

BLOC_BF-MED 34” 34” 24” concrete 3 IN. 762 lbs

BLOC_BF-LG 34” 34” 30” concrete 3 IN. 910 lbs

BLOC_BF-XL 34” 34” 36” concrete 3 IN. 1060 lbs

BLOC_BF-XXL 34” 34” 42” concrete 3 IN. 1210 lbs


BLOC_CON-SM 34” 34” 18” concrete 3 IN. 612 lbs

BLOC_CON-MED 34” 34” 24” concrete 3 IN. 762 lbs

BLOC_CON-LG 34” 34” 30” concrete 3 IN. 910 lbs

BLOC_CON-XL 34” 34” 36” concrete 3 IN. 1060 lbs

BLOC_CON-XXL 34” 34” 42” concrete 3 IN. 1210 lbs

BLOC SERIES CONCRETE | BOARDFORM STANDARD SIZES


METAL BLOC SERIES

PRODUCT ID LENGTH WIDTH HEIGHT MATERIAL THICKNESS AVG. WT. PRODUCT ID MATERIAL THICKNESS AVG. WT. PRODUCT ID MATERIAL THICKNESS AVG. WT.

BLOC_C-SM 34” 34” 18” corten steel 12 GA. 91 lbs BLOC_S-SM pc steel 12 GA. 91 lbs BLOC_A-SM aluminum 0.125 36 lbs

BLOC_C-MED 34” 34” 24” corten steel 12 GA. 108 lbs BLOC_S-MED pc steel 12 GA. 108 lbs BLOC_A-MED aluminum 0.125 43 lbs

BLOC_C-LG 34” 34” 30” corten steel 12 GA. 130 lbs BLOC_S-LG pc steel 12 GA. 130 lbs BLOC_A-LG aluminum 0.125 52 lbs

BLOC_C-XL 34” 34” 36” corten steel 12 GA. 147 lbs BLOC_S-XL pc steel 12 GA. 147 lbs BLOC_A-XL aluminum 0.125 59 lbs

BLOC_C-XXL 34” 34” 42” corten steel 12 GA. 167 lbs BLOC_S-XXL pc steel 12 GA. 167 lbs BLOC_A-XXL aluminum 0.125 67 lbs

BLOC SERIES CORTEN STEEL | POWDER COATED STEEL | ALUMINUM STANDARD SIZES

The Bloc Series is a collaboration with Hocker Design Group, designed by David Hocker. Bloc planters are manufactured in concrete, boardform, corten steel, and powder coated steel and aluminum.


PRODUCT ID LENGTH WIDTH HEIGHT MATERIAL LEVELING FEET THICKNESS AVG. WT.

BX_BCH_CON_2 24” 24” 18” concrete stainless steel 3 IN. 540 lbs




* All box benches are now manufactured to include leveling feet

CONCRETE BOX BENCH SERIES STANDARD SIZES

CONCRETE BOX BENCH SERIES


PRODUCT ID LENGTH WIDTH HEIGHT BASE SEAT LEVELING FEET AVG. WT.

ECHO_BCH_24-2 24” 24” 18” pc steel ipe stainless steel 125 lbs




* All box benches are manufactured to include leveling feet

ECHO BENCH SERIES STANDARD SIZES

ECHO BENCH SERIES


FF LOUNGER SERIES STANDARD SIZES

FF LOUNGER SERIES

PRODUCT ID LENGTH WIDTH HEIGHT BASE SEAT GLIDE AVG. WT.

FF_LOUNGE_3 36” 38.5” 18” pc steel 4” ipe post nylon / np steel 540 lbs




* All loungers are manufactured to include adjustable glides with nylon base and nickel plated steel shell

- All FF Loungers are manufactured using 1/4” thick Powder Coated Steel Base + a 4” wood post seat.

- Both Ipe and Cumaru wood options are available. Manufacturer wil also consider optional use of different wood species as specified by Designer, depending on availability of dimensional lumber sizing and sourcing.

POST WOOD SEAT | POWDER COATED STEEL BASE


PRECAST CONCRETE SURFACE FINISHPrecast concrete is a natural, unpredictable process that does not always produce consistent surface results. By nature, precast applications inherently have air bubbles that will produce a “pitted” or “worm hole” appearance in the surface. Although our casting methods work to reduce this affect, it is never really eliminated, nor controlled, thus producing individual pieces, each uniquely expressive in their surface qualities. Form and Fiber offers a natural finish in our precast planters. Once demolded, planters are lightly sanded by hand and properly cured before adding interior and exterior sealants.

COR-TEN® STEEL SURFACE FINISHForm and Fiber manufacturers pre-weathered Cor-Ten® steel products utilizing ASTM A606 Type 4 Cor-Ten® Steel and ASTM A588 Cor-Ten® Steel. Product is solde as pre-weathered where mill scale removed, surface is flashed and rust patina is developed. Finish achieves an advanced level of oxidation.

A light metal sealant is applied for pre-weathered finishes, allowing products to be handled while continuing oxidation. Rust leaching at base will continue until fully oxidized, but greatly decreased to due removal of mill scale and initial pre-weathering. For this reason, designers should still exercise caution in placement of Cor-Ten products in exterior environments. This sealant is a temporary protectant and is meant to allowing units to be handled.

PRODUCT FINISHES

Variation in Natural Surface Finish: Pitting size will vary in size and depth as these examples do.

corten powder coatmatte

white satin

light gray satin

dark gray satin

black satin

black matte

champagnesatin

dark bronzematte

silver satin

gun metalsatin

medium bronze satin

cor-ten steel pre-weathered

carbon steelclear coated

primer basematte

STEEL AND STOCK POWDER COAT FINISHESForm and Fiber offers a range of steel and stock powder coat finishes for both steel and aluminum products. All F&F stock powder coat finishes are AMAA 2604 exterior rated super durable powders. Additionally, steel product is primed with a zinc rich epoxy primer prior to powder coating.

Form and Fiber offers non-stock RAL colors, including metallics and custom match colors for an upcharge, based on provided coating spec and/or swatch.

Manufactured 1 Hour Southeast of Dallas Texas P.O. Box 2102 Mabank Texas 75147 www.formandfiber.com tel. 888-314-8852 [email protected]

Documents

· order is unique in it’s style, size, color, and quantity, as specified for your project. Production for most orders takes approximately 6-8 or 8-10 weeks, depending on quantity