Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
EPIC® Connectors- Rectangular,Circular and Pin & Sleeve
225
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® Connectors- Rectangular,Circular and Pin & Sleeve
226
EPIC® Rectangular Connectors
EPIC® Rectangular Overview 229Overview of Housings, Plugs & Receptacles, and Selection Charts
EPIC® HA Series # of contacts: 3, 4, 10, 16, 32, 48, 64 (+PE) 235
EPIC® HQ Series # of contacts: 5 (+PE) 256
EPIC® STA Series # of contacts: 6, 14, 20 (+PE) 260
EPIC® HBE Series # of contacts: 6, 10, 16, 24, 32, 48 (+PE) 271
EPIC® HEE Series # of contacts: 10, 18, 32, 46, 64, 92 (+PE) 319
EPIC® HBS Series # of contacts: 6, 12 (+PE) 339
EPIC® HBVE Series # of contacts: 3, 6, 10 (+PE) 347
EPIC® HD Series # of contacts: 7, 8, 15, 24, 25, 40, 50, 64, 80, 128 (+PE) 362
EPIC® HDD Series # of contacts: 24, 42, 72, 108, 144, 216 (+PE) 395
EPIC® MC Series # of contacts: 2 - 280 415
Mixed Power Series # of contacts: 4 Pwr x 0 Signal, 4 Pwr x 2 Signal, 4 Pwr x 8 Signal 450Circular Connectors Overview
Zylin R2.5 Series # of contacts: 8+1, 9, 12, 16, 17 465
Zylin R3.0 Series # of contacts: 21, 26 472
Connector Accessories
Glands 477Seal between cable and connectorDust Covers 480Protective covers to protect unmated connectorsCoding Pins 482Helps prevent incorrect connections when housings are mounted next to one anotherEMC Protection 483Shielding for electromagnetic interferenceSplit Hoods with Grommets 484Convenient way to pass finished assemblies through a connector housingAdapter Plates 485Quick & Easy Din Rail Adapters 486Mount connectors on Din RailTools & Contacts 488
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® Connectors- Rectangular,Circular and Pin & Sleeve
227
EPIC® Pin & Sleeve Connectors
Pin & Sleeve Overview 492• Overview of Male Plugs & Inlets 493• Overview of Female Connectors & Switched Interlocked Socket Outlets 494• IEC & UL Standards 495• Ground Pin Locations & Voltage 496• Key Features 497• Test Data 498• Cable OD Accommodation 499• Wire Size Accommodation 499• Construction Materials 499• Plugs & Connectors Reference Data 500• Construction of Connectors 501• MULTIMAX Connector Overview 503• Switch Socket Outlet Reference Data 504• ULYSSE Switched Socket Outlets 505• ALUPRES Switched Socket Outlets 506
North American Standards: Quick Select Charts 507
International Standards: Quick Select Charts 509
Dimensional Data:• North American 20 Amp/ International 16 Amp
• Male Plugs & Female Connectors 513• Female Panel Mount Receptacles & Male Plug Inlets 514• Switched Socket Outlet 515
• North American 30 Amp/ International 32 Amp• Male Plugs, Female Connectors & Female Panel Mount Receptacles 516• Male Plug Inlets 517• Switched Socket Outlet 515
• North American 60 Amp/ International 63 Amp• Male Plugs, Female Connectors, & Female Panel Mount Receptacles 518• Male Plug Inlets & Switch Socket Outlets 519
• North American 100 Amp/ International 125 Amp• Male Plug, Female Connectors, & Female Panel Mount Receptacles 520• Male Plug Inlets 521
Accessories 521
Circuit Wiring Diagrams 522
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORS
228
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSRectangular Industrial Connectors: Technical Data Overview
229
STANDARD GREY (NEMA 4, IP 65) EP BLACK COATING (NEMA 4X)
DIE CAST ZINC(NEMA 4, IP65)
PLASTIC(NEMA 4, IP 65)
EPIC® HBE SERIES
Specifications:Temperature Range:Protection class:Material:
DIN 43652-40°C to +125°CNEMA 4, 4X; IP65 NEMA 4: HBE 6 - 48, HA 10 - 64: aluminum alloy, powder coated (grey), locking levers and boltsmade of zinc plated steel. HA 3/4: Die cast zinc, powder coated or thermoplastic flame retardantmaterial rated UL 94 V-0 (Grey or Black Plastic).NEMA 4X: HBE 6 - 48 EP, HA 10 - 64 EP: Environmentally Protected: aluminum alloy, powder coated (black), locking levers and bolts made of stainless steel.
PG NPT METRIC PG NPT METRIC
EPIC® RECTANGULAR HOUSINGS
STANDARD GREY (NEMA 4, IP 65)
PG NPT METRIC PG NPT METRIC
PGDIE CAST ZINC
(NEMA 4, IP65)
METRICNPT
EP BLACK COATING (NEMA 4X)
** Please note that all the rectangular plugs and receptacles either fit into a HBE or HA Series housing.
Lapp offers 11 series of rectangular connectors. The rectangular overview section will help determine the series whichbest suits your application. An explanation of rectangular connectors is in the Technical Data section.
Once the appropriate series has been determined turn to the referenced section in the catalog. The EPIC® RectangularSeries is set up in the following structure.· The inserts (plugs and receptacles) are shown by number of contacts. All available terminations are shown.· Please remember when choosing crimp terminated plugs & receptacles, the contacts have to be ordered separately.
The appropriate contacts and tools immediately follow the plugs and receptacles.· Immediately following each group of plugs and receptacles are the housings (hoods and bases) which fit these
connectors. The hoods and bases are grouped by number and position of levers to ensure compatibility. Metric parts and all diagrams are shown in the main HA & HBE Housing Sections.
EPIC® HA SERIES
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSRectangular Industrial Connectors: Technical Data Overview
230
EPIC® RECTANGULAR PLUGS & RECEPTACLES
# of Contacts:
Rated Voltage:Rated Current:
Termination Wire Size:
3, 4, 10,16, 32, 48, 64 (+PE)600V10A (HA 3/4), 14A (HA 10 - 48)ScrewAWG 20 - 14 (0.5 - 2.5 mm2)
EPIC® HBE
# of Contacts:Rated Voltage:Rated Current:Termination:Wire Size:
6, 10, 16, 24, 32, 48 (+PE)600V16AScrew, Crimp, Cage clampAWG 20 - 14 (0.5 - 2.5 mm2)AWG 20 - 12 (0.5 - 4 mm2)-Crimp
EPIC® HD
# of Contacts:
Rated Voltage:Rated Current:Termination:Wire Size:
7, 8, 15, 25, 40, 50, 64, 80, 128 (+PE)600V10ACrimpAWG 22 - 14 (0.14 - 2.5 mm2)
# of Contacts:
Rated Voltage:Rated Current:Termination:Wire Size:
10, 18, 32, 46,64, 92 (+PE)600V16ACrimpAWG 20 - 12(0.5 - 4.0 mm2)
# of Contacts:Rated Voltage:Rated Current:Termination:Wire Size:
5 (+PE)600V16ACrimpAWG 20 - 14(0.5 - 2.5 mm2)
# of Contacts:Rated Voltage:Rated Current:Termination:Wire Size:
3, 6, 10 (+PE)600V16AScrewAWG 20 - 14(0.5 - 2.5 mm2)
# of Contacts:
Rated Voltage:Rated Current:Termination:Wire Size:
# of Contacts:Rated Voltage:Rated Current:Termination:
Wire Size:
# of Contacts:
Rated Voltage:Rated Current:Termination:Wire Size:
4 Pwr, 4 Pwr & 2Sgl, 4 Pwr & 8 Sgl600V16 - 80AScrewup to AWG 6 (Pwr)up to AWG 14 (Sgl)
# of Contacts:
Rated Voltage:Rated Current:Termination:Wire Size:
6, 14, 20, 40(+PE)48V10AScrew, SolderAWG 20 - 16(0.5 - 1.5 mm2)
# of Contacts:Rated Voltage:Rated Current:Termination:Wire Size:
6, 12 (+PE)600V35AScrewAWG 20 - 10 (0.5 - 6.0 mm2)
EPIC® HBS MIXED POWER EPIC® HEE EPIC® HQ
EPIC® HBVE EPIC® HDDEPIC® MCEPIC® STA
2 - 280 (+PE)63 - 1000V10 - 82ACrimp/Coax/Fiber Optic/ScrewAWG 28 - 6(0.06 - 10 mm2)
24, 42, 72, 108, 144, 216 (+PE)600V8.5ACrimpAWG 22 - 14 (0.14 - 2.5 mm2)
Page #235
Page #271
Page #362
Page #260
Page #347
Page #415
Page #395
Page #339
Page #450
Page #319
Page #256
EPIC® HA
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSRectangular Industrial Connectors: Quick Select Chart
231
345678
10121415161820242532404246485064728092
108128144216
2-2804 Pwr/ 0 Signal
4 Pwr/ Signal4 Pwr/ 8 Signal
48V600V
63-1000V380- 600V
7A8.5A10A14 A16A35A
10 - 82A16 - 80A
Cage ClampCrimpScrewSolder
Terminal Block
20 - 1622 - 1420 - 14up to 1420 - 12 20 - 1030 - 6up to 6
HA HQ STA HBE HEE HBS HBVE HD HDD MC MP
# o
f C
on
tact
s +
PE
UL
Rat
ed
Volt
age
UL
Rat
ed
Cu
rren
tTe
rmin
atio
nTy
pe
Wir
e S
ize
(AW
G)
XX
X
X
X
X
X
X
X (3/4)X
X
X
X
X
X
X
X
X
X
X
X
X
X
XX
X
X
X
X
X
X
X
X
X
XXX
X
X
X (Crimp)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
XX
X
X
X
XX
X
X
X
X (TB)
X
X
X
X (TB)X (Crimp)
X
X
X
X
XX
X
X
X
X
X
X
X
XXX
X
XXX
X
X
X
X (Signal)
X (Power)
Page # 235 256 260 271 319 339 347 362 395 415 450
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSRectangular Industrial Connectors: Quick Select Chart
232
6
8
10
12
14
16
18
20
345345345723457234579121825234579121825344150606123457912182534415061234579101218242534
HA3HA3HA3HA4HA10HA10HA16HA32HA32HA3HA3HA3HA4HA10HA10HA16HA32HA32HA48HA48HA64HA64HA64HA3HA3HA3HA4HA10HA10HA16HA32HA32HA48HA48HA64HA64HA3HA3HA3HA4HA10HA10HA10HA16HA32HA32HA32HA48
STA6STA6STA6STA6STA6STA14STA14STA20STA40STA40STA40
STA6STA6STA6STA6STA6STA14STA14STA20STA40STA40STA40
STA6STA6STA6STA6STA6STA14STA14STA14STA20STA40STA40STA40
HBE6HBE6HBE6HBE6HBE6HBE6HBE6HBE6HBE6HBE6HBE10HBE16HBE24HBE24HBE6HBE6HBE6HBE6HBE6HBE10HBE16HBE24HBE24HBE48HBE48
HBE6HBE6HBE6HBE6HBE6HBE10HBE16HBE24HBE24HBE48HBE48
HBE6HBE6HBE6HBE6HBE6HBE10HBE10HBE16HBE24HBE24HBE24HBE48
HEE10HEE10HEE18HEE18HEE32
HEE10HEE10HEE18HEE18HEE32HEE46HEE46HEE64HEE64HEE64
HEE10HEE10HEE18HEE18HEE32HEE46HEE46HEE64HEE64
HEE10HEE10HEE10HEE18HEE18HEE32HEE32HEE46
HBS6HBS6HBS6HBS6HBS6HBS6HBS6HBS6HBS6HBS6HBS6HBS6HBS6HBS6
HBS12HBS12
HBS6HBS6HBS6HBS6HBS6
HBS12HBS12
HBS6HBS6HBS6HBS6HBS6
HBS12HBS12
HBS6HBS6HBS6HBS6HBS6
HBS12HBS12HBS12
HBVE3HBVE3HBVE3HBVE6HBVE6
HBVE10
HBVE3HBVE3HBVE3HBVE6HBVE6
HBVE10
HBVE3HBVE3HBVE3HBVE6HBVE6
HBVE10
HBVE3HBVE3HBVE3HBVE6HBVE6
HBVE10HBVE10
HD7HD7HD7HD7HD7HD8
HD15HD24HD24HD7HD7HD7HD7HD7HD8
HD15HD24HD24HD40HD40HD50HD64HD64HD7HD7HD7HD7HD7HD8
HD15HD24HD24HD40HD40HD50HD64HD7HD7HD7HD7HD7HD8
HD15HD15HD24HD24HD24HD40
HDD24HDD24
HDD24HDD24HDD42HDD42HDD72HDD72HDD72
HDD24HDD24HDD42HDD42HDD72HDD72
HDD24HDD24HDD24HDD42
HQ5HQ5HQ5HQ5
HQ5HQ5HQ5HQ5
HQ5HQ5HQ5HQ5
HQ5HQ5HQ5HQ5
MC2MC2
MC2/MC3MC2/MC3MC3 x 2
MC2/MC3MC2/MC3MC3 x 2MC3 x 2
MC3MC3
MC3/MC4/MC5MC4/MC5MC3 x 2
MC3MC3
MC3/MC4/MC5MC4/MC5
MC10MC10
MC10 x 2MC10 x 2MC10 x 3
MC3MC3
MC3/MC4/MC5MC4/MC5
MC10MC10
MC10 x 2MC10 x 2MC10 x 3MC10 x 4MC10 x 4MC10 x 5MC10 x 6MC10 x 6
MC4MC4
MC4/MC5MC4/MC5
MC10MC10
MC10 x 2MC10 x 2MC10 x 3MC10 x 4MC10 x 4MC10 x 5MC10 x 6
MC4MC4
MC4/MC5MC4/MC5
MC10MC10MC10MC20MC20
MC20 x 2MC20 x 2MC20 x 2
PowerPowerPowerPowerPowerPowerPowerPowerPower
SignalSignalSignalSignalSignalSignal
SignalSignalSignalSignalSignalSignal
SignalSignalSignalSignalSignalSignal
SignalSignalSignalSignalSignalSignal
Wire GaugeAWG
HA HBE16 A
HEE16A
HBS35 A
HBVE16A
HD10A
HDD8.5 A
HQ16 A
MC MPSTA10A
# Conductorsw/ Ground
Please note that the amperage for all series listed in black can be found at the top of the column.4 Amps, 10 Amps, 14 Amps, 16 Amps, 20 Amps, 25 Amps, 50 Amps, 80 Amps, 83 Amps
TERMINATE YOUR OLFLEX® CABLE WITH THE RIGHT CONNECTOR
Notes: 1) The above chart shows the relationship between cable wire gauge and conductor count with connector contact count. Final connector selection and application suitability will depend on voltage and current limits of the cable and connector
2) The MC Series modular connector offers a wide variety of mix-and-match combinations. The combinations shown in the chart are offered as suggestions based on providing a solution in the smallest housing size.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSRectangular Industrial Connectors: Quick Select Chart
233
TERMINATE YOUR OLFLEX® CABLE WITH THE RIGHT CONNECTOR
22w/ or w/o gnd
24, 26w/ or w/o gnd
28w/ or w/o gnd
234578101214151618202125283032364044506157810121415161820212528303236404450611012141516182021252830323640445061
HD7HD7HD7HD7HD7HD7
HD15HD15HD15HD15HD15HD24HD24HD24HD24HD40HD40HD40HD40HD40HD50HD50HD64
HDD24HDD24HDD24HDD24HDD42HDD42HDD42HDD42HDD42HDD72HDD72HDD72
MC10MC10MC10MC10MC20MC20MC20MC20MC20MC20MC20
MC20 x 2MC20 x 2MC20 x 2MC20 x 2MC20 x 2MC20 x 2MC20 x 3MC20 x 3MC20 x 3
MC10MC10MC10MC10MC20MC20MC20MC20MC20MC20MC20
MC20 x 2MC20 x 2MC20 x 2MC20 x 2MC20 x 2MC20 x 2MC20 x 3MC20 x 3MC20 x 3
MC20MC20MC20MC20MC20MC20MC20MC20
MC20 x 2MC20 x 2MC20 x 2MC20 x 2MC20 x 2MC20 x 2MC20 x 3MC20 x 3MC20 x 3
Wire GaugeAWG
HA HBE16 A
HEE16 A
HBS35 A
HBVE16 A
HD10A
HDD8.5 A
HQ16 A
MC MPSTA10 A
# Conductorsw/ Ground
Notes: 1) The above chart shows the relationship between cable wire gauge and conductor count with connector contact count. Final connector selection and application suitability will depend on voltage and current limits of the cable and connector
2) The MC Series modular connector offers a wide variety of mix-and-match combinations. The combinations shown in the chart are offered as suggestions based on providing a solution in the smallest housing size.
Please note that the amperage for all series listed in black can be found at the top of the column.4 Amps, 10 Amps, 14 Amps, 16 Amps, 20 Amps, 25 Amps, 50 Amps, 80 Amps, 83 Amps
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSRectangular Industrial Connectors: Technical Data Overview
234
HOUSINGSHBE 6
HBE 10
HBE 16
HBE 24
HBE 32
HBE 48
HBEHBE 6
HBE 10
HBE 16
HBE 24
HBE 32
HBE 48
HEEHEE 10
HEE 18
HEE 32
HEE 46
HEE 64
HEE 92
HBS---
---
HBS 6
---
HBS 12
---
HBVE---
HBVE 3
HBVE 6
HBVE 10
---
---
HD---
---
HD 40
HD 64
HD 80
HD 128
HDDHDD 24
HDD 42
HDD 72
HDD 108
HDD 144
HDD 216
MC2
Modules3
Modules5
Modules7
Modules10
Modules14
Modules
Mixed Pwr---
---
4 Pwr/ 0 Sgl4 Pwr/ 2 Sgl4 Pwr/8 Sgl
---
---
PLUGS & RECEPTACLES
EPIC® rectangular connectors shall comply with all applicable requirements of Underwriters Laboratory (UL)Standards 1977 and 498, VDE Standard 0110 for creepage and clearance distances and VDE Standard 0627for the connector design. The HD and HDD series is developed according to DIN Standard 43652.
The recognized UL file number and Canadian Standards Associations (CSA) for EPIC® CONTACT® connectorsare:UL recognized file #E75770CSA certified file #LR53004-1
EPIC® connectors meet IP 65, NEMA 4, 4X and NEMA 12 standards only when in the mated condition.
APPROVALS
PLUGS & RECEPTACLES WITH THEIR MATING HA HOUSINGS
HOUSINGSHA 3/4
HA 10
HA 16
HA 32
HA 48
HA 64
HAHA 3/4
HA 10
HA 16
HA 32
HA 48
HA 64
HQHQ 5
---
---
---
---
---
STASTA 6
STA 14
STA 20
STA 40
---
---
HDHD 7/8
HD 15
HD 25
HD 50
---
---
PLUGS & RECEPTACLES
PLUGS & RECEPTACLES WITH THEIR MATING HBE HOUSINGS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
The small HA 3/4 inserts are used wheneverspace is limited. The HA Series 10 - 48inserts now have shortened groundstraps. These inserts are uniquebecause the wire cross sectioncan still be up to 2.5 mm2. TheHA 3 - 48 screw terminatedinserts fit into HA SeriesHousings. A modified HBE48 Housing can fit 64 contacts.
The HA SeriesHousings are compact in shapeand utilize fixedlevers.
EPIC® CONNECTORSHA Series
235
HA 3/4 Series 239
HA 10 Series 242
HA 16 Series 245
HA 32 Series 248
HA 48 Series 252
HA 64 Series 254
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA Series
236
3, 4, 10, 16, 32, 48, 64 (+PE)VDE: 400V EPIC® HA 3/4
250V EPIC® HA 10 - 64UL: 600V EPIC® HA 3 - 64CSA: 600V EPIC® HA 3 - 64SEV: 250V EPIC® HA 3 - 64
VDE: 10A EPIC® HA 3/416A EPIC® HA 10 - 64
UL: 10A EPIC® HA 3/414A EPIC® HA 10 - 64
CSA: 10A EPIC® HA 3/416A EPIC® HA 10 - 64
SEV: 16A EPIC® HA 3 - 6434 kV
Number of Contacts:Rated Voltage:
Rated Current:
Pollution Level:Dimensioning Transient:
Screw Termination:
Temperature Range:Contacts:Contact Resistance:Test Voltage:Mating Cycles:
HA INSERTS: DERATING CURVES
HA 10 Panel Mount BaseHA 10 Surface Mount & Cable Coupler HoodHA 16 Panel Mount BaseHA 16 Surface Mount & Cable Coupler Hood
PG/NPT70.700070.702070.700170.7021
Metric79.700079.702079.700179.7021
Ambient Temperature (°C)
Wo
rkin
g C
urr
ent
(A)
1.5 mm2 (16 AWG) 2.5mm2 (14 AWG)
EMC PROTECTION
TECHNICAL DATA
EMC Shielding is retrofittable.
HA 3/4:0.5 - 2.5 mm2 (AWG: 20 - 14) for solid wire orstranded wire with short wire end ferrule and without insulationHA 10 - 64: • 0.5 - 1.5 mm2 (AWG: 20 - 14): for solid wire orstranded wire with wire end ferrule and with insulation.• 0.75 - 2.5 mm2 (18 - 14 AWG): for stranded wire
without wire end ferrule (requires insert with wire protection)
-40°C - 125°CCopper alloy, silver plated1.5 - 4 mOhm4 kv100 (higher mating cycles depending on the application)
Ambient Temperature (°C)
Wo
rkin
g C
urr
ent
(A)
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA Housings
237
Housings:Specifications: DIN 43652Temperature Range: -40°C to +125°CProtection class: IP 65: HA 3/4, 10, 16, 32, 48, 64Material: HA 3/4: Die cast zinc, powder coated/ Thermoplastic flame retardant material rated UL 94 V-0
HA 10 - 64: aluminum alloy, powder coated
PG NPT METRIC
STANDARD GREY COATING (NEMA 4)
BLACK COATING (Environmentally Protected) NEMA 4X
HA 10 - 48: Aluminum alloy, powder coated (grey), locking levers and bolts made of zinc plated steel.For industrial applications in demanding environments.
PG NPT METRIC
EP: Environmentally Protected:HA 10 - 48: Aluminum alloy, powder coated (black), locking levers and bolts made of stainless steel.For industrial applications in extremely demanding environments with aggressive atmospheres.
PG NPT METRIC
HA 3/4: Die cast zinc, powder coated (Grey)Thermoplastic flame retardant material rated UL 94 V-0 (Grey or Black Plastic).
DIN 50262
DIN 50262
DIN 50262
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA Panel Cut-Outs For Panel Mount Bases
238
All dimensions are in mm.
Fits the following plugs & receptacles: HA 16, STA 20 and HD 25 Series.
Fits the following plugs & receptacles: HA 32, STA 40 and HD 50 Series.
Fits the following plugs & receptacles: HA 3, HA 4, HQ 5, STA 6, HD 7, and HD 8 Series.
Fits the following plugs & receptacles: HA 10, STA 14, and HD 15 Series.
Fits the following plugs & receptacles: HA 48 Series.
Fits the following plugs & receptacles: HA 64 Series.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 3&4 Plugs & ReceptaclesHA 3&4 Housings: Single Lever on Base
239
TOP ENTRY
HA 3 HA 4
SIDE ENTRY
TOP ENTRY HOODS
All dimensions are in mm.
HA 3HA 4
Plug:10.420010.4310
Receptacle:10.421010.4320
All dimensions are in mm.
Zinc Die CastBlack PlasticGrey Plastic
PG111111
NPT1/2”1/2”1/2”
Metric202020
NPTPart #
10.5121 NP10.4255 NP10.4260 NP
MetricPart #
-19.425519.4260
PGPart #
10.426510.426710.4264
MetricPart #
19.4265--
Without Cable GlandSize of Entry With Cable GlandMaterial
SCREW TERMINATED INSERTS
HOODS
Coding Pin: 10.4513
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 3&4 Housings: Single Lever on Base
240
All dimensions are in mm.
Black Plastic10.4222
Grey Plastic10.4220
Grey Metal10.4225
Grey Metal10.4235
Black Plastic10.4231
Grey Plastic10.4230
SIDE ENTRY HOODS
ANGLED PANEL MOUNT BASES
PANEL MOUNT BASES
Covers for Panel Mount or Surface Mount Bases/ andCable Coupler HoodsDust Cover for HA 3/4 Housings with Male InsertMetal Dust Cover for HA 3/4 Housings with Male InsertDust Cover for HA 3/4 Housings with Female Insert(includes gasket)Metal Dust Cover for HA 3/4 Housings with FemaleInsert (includes gasket)
Part #with string
10.430410.513010.4301
10.5131
Part #without string
10.4300-
10.4303
-
Material: Thermoplastic Resin or Aluminum Temperature: -40°C to 125°C
DUST COVERS WITH OR WITHOUT ATTACHMENT STRING
All dimensions are in mm.
Zinc Die CastBlack PlasticGrey Plastic
PG111111
NPT1/2”1/2”1/2”
Metric202020
NPTPart #
10.5123 NP10.4273 NP10.4270 NP
MetricPart #
-19.427319.4720
PGPart #
10.427510.620610.4271
MetricPart #
19.4275--
Without Cable GlandSize of Entry With Cable GlandMaterial
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 3&4 Housings: Single Lever on Base
241
METAL PLASTIC
METAL PLASTIC
All dimensions are in mm.
All dimensions are in mm.
SURFACE MOUNT BASES
CABLE COUPLER HOODS
Zinc Die CastBlack PlasticGrey Plastic
PG111111
NPT1/2”1/2”1/2”
Metric202020
NPTPart #
10.5127 NP10.5117 NP10.4240 NP
MetricPart #
-19.511819.4241
PGPart #
10.424510.424710.4242
MetricPart #
19.4245--
Without Cable GlandSize of Entry With Cable GlandMaterial
Zinc Die CastBlack PlasticGrey Plastic
PG111111
NPT1/2”1/2”1/2”
Metric202020
NPTPart #
10.5129 NP10.4292 NP10.4290 NP
MetricPart #
19.512919.429219.4290
PGPart #
10.429510.620310.4291
MetricPart #
19.4295--
Without Cable GlandSize of Entry With Cable GlandMaterial
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 10 Plugs & ReceptaclesHA 10 Housings: Single Lever on Base
242
Panel Cut-Out
(Insert Only)
View fromcable side
TOP ENTRY SIDE ENTRY
HIGH PROFILE
Metric hoods do not come with a neck.
All dimensions are in mm.
All dimensions are in mm.
These inserts fit inthe HA 10 Series
Housings.
STANDARD PROFILE
HA 10 with Wire ProtectionHA 10 without Wire Protection
Plug:10.440110.4400
Receptacle:10.441110.4410
Top Entry
Side Entry
PG13.5161621
NPT1/2”1/2”1/2”3/4”
Metric20252025
PGPart #
10.44601010.44611010.44501010.445510
NPTPart #
10.4460 NP10.4461 NP10.4450 NP10.4455 NP
MetricPart #
19.446019.446119.445019.4455
PGPart #
-70.461070.4630
-
MetricPart #
-79.461079.4630
-
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
Top Entry
Side Entry
PG16211621
NPT1/2”3/4”1/2”3/4”
Metric20252025
PGPart #
70.460270.460470.462270.4624
NPTPart #
70.4602 NP70.4604 NP70.4622 NP70.4624 NP
MetricPart #
79.460279.460479.462279.4624
PGPart #
70.461270.461470.463270.4634
NPTPart #
70.4612 NP70.4614 NP70.4632 NP70.4634 NP
MetricPart #
79.461279.461479.463279.4634
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
SCREW TERMINATED INSERTS
HOODS
NPTPart #
-70.4610 NP70.4630 NP
-
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 10 Housings: Single Lever on Base
243
All dimensions are in mm.
All dimensions are in mm.
Standard Grey Coating10.442070.4440
Black Coating (EP)70.442570.4445
PANEL MOUNT BASES
SURFACE MOUNT BASES
WITH DUST COVER
WITHOUT DUST COVER
1 Entry
2 Entries
PG16211621
NPT1/2”3/4”1/2”3/4”
Metric20252025
PGPart #
10.448110.448010.450110.4500
MetricPart #
19.448119.448019.450119.4500
PGPart #
70.447270.447470.448270.4484
MetricPart #
79.447279.447479.448279.4484
Standard Grey CoatingSize of Entry Black Coating (EP)Number ofEntries
1 Entry
2 Entries
PG16211621
NPT1/2”3/4”1/2”3/4”
Metric20252025
PGPart #
70.455270.455470.456270.4564
MetricPart #
79.455279.455479.456279.4564
PGPart #
70.457270.457470.458270.4584
MetricPart #
79.457279.457479.458279.4584
Standard Grey CoatingSize of Entry Black Coating (EP)Number ofEntries
DescriptionPanel Mount without Dust CoverPanel Mount with Dust Cover
NPTPart #
10.4481 NP10.4480 NP10.4501 NP10.4500 NP
NPTPart #
70.4552 NP70.4554 NP70.4562 NP70.4564 NP
NPTPart #
70.4472 NP70.4474 NP70.4482 NP70.4484 NP
NPTPart #
70.4572 NP70.4574 NP70.4582 NP70.4584 NP
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 10 Housings: Single Lever on Base
244
Metric hoods do not come with a neck.
All dimensions are in mm.
PG METRIC
Standard
High
PG13.51621
NPT1/2”1/2”3/4”
Metric202525
PGPart #
10.439070.450070.4504
MetricPart #
19.439079.450079.4504
PGPart #
-70.451070.4514
NPTPart #
-70.4510 NP70.4514 NP
MetricPart #
-79.451079.4514
Standard Grey CoatingSize of Entry Black Coating (EP)Profile
CABLE COUPLER HOODS
Part #with string
10.4575
10.4576
Part #without string
10.4577
10.4578
Material: Thermoplastic Resin Temperature: -40°C to 125°C
DUST COVERS WITH OR WITHOUT ATTACHMENT STRING
NPTPart #
10.4390 NP70.4500 NP70.4504 NP
DescriptionDust Cover for HA 10 Panel Mount or SurfaceMount Base/ Cable Coupler hoods (includes gasket)Dust cover for HA 10 Hoods
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 16 Plugs & ReceptaclesHA 16 Housings: Single Lever on Base
245
Panel Cut-Out
View from cable side
TOP ENTRY SIDE ENTRY
STANDARD PROFILE
HIGH PROFILE
Metric hoods do not come with a neck.
All dimensions are in mm.
These inserts fit inthe HA 16 Series
Housings.HA 16 with Wire ProtectionHA 16 without Wire Protection
Plug:10.530010.5320
Receptacle:10.531010.5330
Top Entry
Side Entry
PG16211621
NPT1/2”3/4”1/2”3/4”
Metric20252025
PGPart #
10.56501010.56521010.56401010.564510
NPTPart #
10.5650 NP10.5652 NP10.5640 NP10.5645 NP
MetricPart #
19.565019.565319.564019.5645
PGPart #
70.4910-
70.4930-
NPTPart #
70.4910 NP-
70.4930 NP-
MetricPart #
79.4910-
79.4930-
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
Top Entry
Side Entry
PG16211621
NPT1/2”3/4”1/2”3/4”
Metric20252025
PGPart #
70.490270.490470.492270.4924
NPTPart #
70.4902 NP70.4904 NP70.4922 NP70.4924 NP
MetricPart #
79.490279.490479.492279.4924
PGPart #
70.491270.491470.493270.4934
MetricPart #
79.491279.491479.493279.4934
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
SCREW TERMINATED INSERTS
HOODS
NPTPart #
70.4912 NP70.4914 NP70.4932 NP70.4934 NP
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 16 Housings: Single Lever on Base
246
WITH DUST COVER
WITHOUT DUST COVER
All dimensions are in mm.
Standard Grey Coating10.462070.4740
Black Coating (EP)70.472570.4745
1 Entry
2 Entries
PG16211621
NPT1/2”3/4”1/2”3/4”
Metric20252025
PGPart #
10.567110.567010.568110.5680
MetricPart #
19.567119.567019.568119.5680
PGPart #
70.477270.477470.478270.4784
MetricPart #
79.477279.477479.478279.4784
Standard Grey CoatingSize of Entry Black Coating (EP)Number ofEntries
1 Entry
2 Entries
PG16211621
NPT1/2”3/4”1/2”3/4”
Metric20252025
PGPart #
70.485270.485470.486270.4864
MetricPart #
79.485279.485479.486279.4864
PGPart #
70.487270.487470.488270.4884
MetricPart #
79.487279.487479.488279.4884
Standard Grey CoatingSize of Entry Black Coating (EP)Number ofEntries
SURFACE MOUNT BASES
PANEL MOUNT BASE
NPTPart #
10.5671 NP10.5670 NP10.5681 NP10.5680 NP
NPTPart #
70.4852 NP70.4854 NP70.4862 NP70.4864 NP
NPTPart #
70.4772 NP70.4774 NP70.4782 NP70.4784 NP
NPTPart #
70.4872 NP70.4874 NP70.4882 NP70.4884 NP
DescriptionPanel Mount without Dust CoverPanel Mount with Dust Cover
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 16 Housings: Single Lever on Base
247
Metric hoods do not come with a neck.
All dimensions are in mm.
PG METRIC
Standard
High
PG16-
1621
NPT1/2”
-1/2”3/4”
Metric20252025
PGPart #
10.5630-
70.480270.4804
MetricPart #
19.563019.563279.480279.4804
PGPart #
70.4810-
70.481270.4814
MetricPart #
79.4810-
79.481279.4814
Standard Grey CoatingSize of Entry Black Coating (EP)Profile
CABLE COUPLER HOODS
DescriptionDust cover for HA 16 Panel Mount or Surface MountBase/ Cable Coupler hoods (includes gasket)Dust cover for HA 16 Hoods
Part #with string
10.4695
10.4696
Part #without string
10.4697
10.4698
Material: Thermoplastic Resin Temperature: -40°C to 125°C
DUST COVERS WITH OR WITHOUT ATTACHMENT STRING
NPTPart #
10.5630 NP-
70.4802 NP70.4804 NP
NPTPart #
70.4810 NP-
70.4812 NP70.4814 NP
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 32 Plugs & Receptacles
248
Panel Cut-out(Insert only)
View from cable side
2 Sets of HA 16 Inserts
All dimensions are in mm.
These inserts fit in the HA 32 Series Housings.
#1-16: with Wire Protection#17-32: with Wire Protection#1-16: without Wire Protection#17-32: without Wire Protection
Plug:10.530010.540010.532010.5420
Receptacle:10.531010.541010.533010.5430
SCREW TERMINATED INSERTS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 32 Housings: Double Levers on Base
249
TOP ENTRY SIDE ENTRY
Metric hoods do not come with a neck.
All dimensions are in mm.
All dimensionsare in mm.
Top Entry
Side Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
10.582010.583010.576010.5770
MetricPart #
19.582019.583019.576019.5770
PGPart #
70.521270.521470.523270.5234
MetricPart #
79.521279.521479.523279.5234
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
Standard Grey Coating10.4720
DescriptionPanel Mount without Dust Cover
Black Coating (EP)70.5025
HOODS
PANEL MOUNT BASE
Material: Thermoplastic Resin Temperature: -40°C to 125°C
DUST COVERS WITH OR WITHOUT ATTACHMENT STRING
Dust cover for HA 32 Panel Mount or Surface MountBase / Cable Coupler hoodsDust cover for HA 32 Hoods (includes gasket)
Part #with string
10.4815
10.4816
Part #without string
10.4817
10.4818
NPTPart #
10.5820 NP10.5830 NP10.5760 NP10.5770 NP
NPTPart #
70.5212 NP70.5214 NP70.5232 NP70.5234 NP
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 32 Housings: Double Levers on Base
250
Metric bases do not come with a neck.
Metric hoods do not come with a neck.
All dimensions are in mm.
PG METRIC
1 Entry withDust Cover2 Entries withDust Cover
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
10.474010.474110.482010.4821
MetricPart #
19.474019.474119.482019.4821
PGPart #
70.507270.507470.508270.5084
MetricPart #
79.507279.507479.508279.5084
Standard Grey CoatingSize of Entry Black Coating (EP)Number ofEntries
PG2129
NPT3/4”1”
Metric2532
PGPart #
10.588010.5885
MetricPart #
19.588019.5885
PGPart #
70.511070.5112
MetricPart #
79.511079.5112
Standard Grey CoatingSize of Entry Black Coating (EP)
SURFACE MOUNT BASE
CABLE COUPLER HOODS
NPTPart #
10.4740 NP10.4741 NP10.4820 NP10.4821 NP
NPTPart #
70.5072 NP70.5074 NP70.5082 NP70.5084 NP
NPTPart #
10.5880 NP10.5885 NP
NPTPart #
70.5110 NP70.5112 NP
All dimensions are in mm.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 32 Housings: Double Levers on Hood
251
TOP ENTRY SIDE ENTRY
Standard Grey CoatingWithout Cover
10.4731With Cover
70.5030
Black Coating (EP)With Dust Cover
70.5035
Metric hoods do not come with a neck.
Metric basesdo not comewith a neck.
Top Entry
Side Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
10.584010.585010.578010.5790
MetricPart #
19.584019.585019.578019.5790
PGPart #
70.526270.526470.528270.5284
MetricPart #
79.526279.526479.528279.5284
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
1 Entry withDust Cover2 Entries withDust Cover
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
70.515270.515470.516270.5164
MetricPart #
79.515279.515479.516279.5164
PGPart #
70.517270.517470.518270.5184
MetricPart #
79.517279.517479.518279.5184
Standard Grey CoatingSize of Entry Black Coating (EP)Number ofEntries
HOODS
PANEL MOUNT BASE
SURFACE MOUNT BASE
NPTPart #
10.5840 NP10.5850 NP10.5780 NP10.5790 NP
NPTPart #
70.5262 NP70.5264 NP70.5282 NP70.5284 NP
NPTPart #
70.5152 NP70.5154 NP70.5162 NP70.5164 NP
NPTPart #
70.5172 NP70.5174 NP70.5182 NP70.5184 NP
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 48 Plugs & Receptacles
252
Panel Cut-Out(Inserts Only) View from cable side
3 Sets of HA 16 Inserts
These insertsfit in the HA
48 SeriesHousings.
#1-16: with Wire Protection#17-32: with Wire Protection#33-48: with Wire Protection#1-16: without Wire Protection#17-32: without Wire Protection#33-48: without Wire Protection
Plug:10.530010.540010.540110.532010.542010.5421
Receptacle:10.531010.541010.541110.533010.543010.5431
SCREW TERMINATED INSERTS
All dimensionsare in mm.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 48 Housings: Double Levers on Base
253
Metric hoodsdo not comewith a neck.
Metric basesdo not comewith a neck.
All dimensionsare in mm.
Top EntrySide Entry
PG2929
NPT1”1”
Metric3232
PGPart #
10.631810.6308
MetricPart #
-19.6308
Standard Grey CoatingSize of EntryPosition ofCable Entry NPT
Part #10.6318 NP10.6308 NP
Standard Grey Coating10.6255
1 Entry2 Entries
PG2929
NPT1”1”
Metric3232
PGPart #
10.633810.6348
MetricPart #
19.633819.6348
Standard Grey CoatingSize of EntryNumber ofEntries NPT
Part #10.6338 NP10.6348 NP
HOODS
PANEL MOUNT BASE
SURFACE MOUNT BASE
TOP ENTRY SIDE ENTRY
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 64 Series
254
All dimensions are in mm.
#1-16: with Wire Protection#17-32: with Wire Protection#33-48: with Wire Protection#49-64: with Wire Protection
Plug:10.530010.540010.540110.5405
Receptacle:10.531010.541010.541110.5415
TOP ENTRY SIDE ENTRY
Metric hoodsdo not comewith a neck.
All dimensions are in mm.
Top Entry
Side Entry
PG293642293642
NPT1”
1 1/4”1 1/2”
1”1 1/4”1 1/2”
Metric324050324050
PGPart #
10.1550-HA10.1560-HA10.1570-HA10.1580-HA10.1590-HA10.1600-HA
MetricPart #
19.1550-HA19.1560-HA19.1570-HA19.1580-HA19.1590-HA19.1600-HA
Standard Grey CoatingSize of Entry# of Entries
HOODS
NPTPart #
10.1550 NP-HA10.1560 NP-HA
-10.1580 NP-HA10.1590 NP-HA
-
Panel Cut-Out(Inserts Only)
SCREW TERMINATED INSERTS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329
EPIC® CONNECTORSHA 64 Housings: Single Lever on Base
255
All dimensions are in mm.
All dimensions are in mm.
Without Dust Cover10.1610-HA
With Dust Coverwith hold down screw
and no dust cover bolts10.1520-HA
With Dust Coverwith hold down screwand dust cover bolts
10.1525-HA
2 Entries
1 Entry
2 Entries withdust cover1 Entry withdust cover
PG2936293629362936
NPT1”
1 1/4”1”
1 1/4”1”
1 1/4”1”
1 1/4”
Metric3240324032403240
PGPart #
10.1660-HA10.1661-HA10.1650-HA10.1651-HA10.1680-HA10.1681-HA10.1670-HA10.1671-HA
NPTPart #
10.1660 NP-HA10.1661 NP-HA10.1650 NP-HA10.1651 NP-HA10.1680 NP-HA10.1681 NP-HA10.1670 NP-HA10.1671 NP-HA
MetricPart #
19.1660-HA19.1661-HA19.1650-HA19.1651-HA19.1680-HA19.1681-HA19.1670-HA19.1671-HA
Standard Grey CoatingSize of Entry# of Entries
PANEL MOUNT BASE
SURFACE MOUNT BASE
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: [email protected] web: http://mdmetric.com
phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329