Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 SL Syed Posted 14 hours ago Compartment

Deepak,

As discussed in the video, you mentioned that, "Once you created compartment and you are not allowed to delete".

I like to know, even the compartment is empty, then also, we can not able to delete the compartment.

Please clarify

by

S.Syed

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 SL Syed Updated 2 days ago File Storage Service

Deepak,

You had an outage in your application caused by the loss of a shared volume provisioned by

File Storage Service (FSS). At this point, you need to restore the data from a snapshot you created of

the FSS. What are the steps to restore the data?

A. Access the directory where the shared volume is mounted, then cd into .snapshot folder, find the

snapshot folder you want to recover and use cp or rsync tool to copy the files to the original location.

B. Open OCI Console, select File Storage Service, find the shared storage, then click on snapshot and

restore.

C. Open OCI Console, select File Storage Service, find the snapshot you created and click restore.

D. Access the directory where you mounted the shared volume, then cd into .snapshot folder and

find the snapshot folder you want to recover and rename that folder to the original folder name.

I don't think D is correct

Right answer is A

Am i right ?

Please guide me

Deepak — Instructor · 2 days ago Posted 2 days ago correct! https://docs.cloud.oracle.com/iaas/Content/File/Tasks/managingsnapshots.htm

Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 SL Syed Updated 2 days ago terraform apply

Deepak

Based on your demo on terraform apply, as a output, it display what are the changes made

My question is

At the end of a terraform apply operation, what is the default output?

A. nothing by default

B. statistics about what was added, changed, and destroyed

C. the entire state file

D. statistics about what was added, changed, and destroyed, and the values of outputs

I am confused, the answer is B or D

Can you advice please?

Deepak — Instructor · 2 days ago Posted 2 days ago Should be in the Quiz section

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 SL Syed Updated 2 days ago VCN

Dear Deepak

Which option lists Virtual Cloud Networks (VCNs) that can be peered?

A. VCN A (172.16.0.0/24) and VCN B (172.16.0.0/28)

B. VCN A (10.0.0.0/16) and VCN B (10.1.0.0/16)

C. VCN A (10.0.2.0/16) and VCN B (10.0.2.0/25)

D. VCN A (10.0.0.0/16) and VCN B (10.0.16.0/24)

For the B and D, there is no ip overlap. I am confused which one is correct, Can you guide me please?

by

S.Syed

Deepak — Instructor · 3 days ago Posted 3 days ago Syed, this questions is already asked please go thru the Q&A

Mark as top answer SL Syed · 3 days ago Posted 3 days ago I verified the Q&A, Still bit confused. Is Option B correct?

Please help on this

Mark as helpful Mark as top answer Deepak — Instructor · 2 days ago Posted 2 days ago This was answered month ago by Narsappa and Manish, see attachment

Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 SL Syed Updated 2 days ago Dataguard

Deepak

By Default in the cloud, Dataguard is operates in Async mode within a region which means Maximum Performance

So that, right answer of below question are A and D. Am i right?

Which two features are offered natively on Oracle Cloud Infrastructure Database Cloud Service (DBCS)?

(Choose two.)

A. Data Guard in Async mode within a region

B. GoldenGate replication between two regions

C. Data Guard in Maximum Protection mode

D. backup to Object Storage

Please guide me

Deepak — Instructor · 2 days ago Answer Posted 2 days ago correct!

Unmark as top answer SL Syed · 2 days ago Posted 2 days ago thanks

Mark as helpful Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 SL Syed Updated 2 days ago to manage Oracle Cloud Infrastructure services

Deebak

In your course, i did not find about Oracle Cloud Infrastructure Desktop Client

For the below question, I think B,D,E . Am i right?. I am bit confused, Can you help on this?

Which three methods can you use to manage Oracle Cloud Infrastructure services? (Choose

three.)

A. Oracle Cloud Infrastructure Desktop Client

B. Oracle Cloud Infrastructure Console

C. SSH or RDP

D. Command-line Interface

E. REST API

Oracle Public Cloud Machine supports an optimized version of the Oracle Compute Cloud Service REST API , which enables you to manage the various Oracle Compute Cloud Service objects. This section gives an overview of the Oracle Compute Cloud Service REST API.

OPC CLI utility. The Oracle Public Cloud Command-Line Interface is a utility to enable management of your cloud environment from the command line. The current release supports the Compute service, with additional service support coming in future releases.

by

S.Syed

Deepak — Instructor · 2 days ago Answer Posted 2 days ago B,D,E

Unmark as top answer SL Syed · 2 days ago Posted 2 days ago thanks

Mark as helpful Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932Lecture - Disaster Recovery Using OCI Part I SL Syed Updated 2 days ago DataGuard

Deepak

As per your demo for Dataguard, You mentioned that each primary can have only one standby and it can not be more . And also you mentioned that, it can only work with BareMetal means it will not work with VM.

Pls clarify

by

S.Syed Labbai

Deepak — Instructor · 2 days ago Posted 2 days ago These limitations are using the console but manually you there are no limitations. Read through the High Availability section on the link:

https://cloud.oracle.com/database/faq

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 SL Syed Updated 3 days ago highly available architecture.

Deepak

Your company is moving an Internet-facing, 2-tier web application into Oracle Cloud Infrastructure. The application must have a highly available architecture.

Which two design options would you consider? (Choose two.)

A. Configure a Dynamic Route Gateway in your VCN and make it highly available.

B. Configure a NAT instance in your Virtual Cloud Network (VCN). Create a route rule by using the private IP of the NAT instance as a route target for all the private subnets in your VCN.

C. Create an Internet Gateway and attach it to your VCN. Deploy public load balancer nodes into two Available Domains.

D. Place all web servers behind a public load balancer.

Here they are talking about High Available architecture, So , i think answer is B and D

Am i right

by

S.Syed Labbai

Deepak — Instructor · 3 days ago Posted 3 days ago These in the quiz section part 2

Mark as top answer SL Syed · 3 days ago Posted 3 days ago Ok i will check quiz and if any doubt i will come to you

Mark as helpful Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 SL Syed Updated 3 days ago Image Source

Deepak

Which two are NOT an image source when launching a new compute instance? (Choose two.)

A. boot volume

B. custom image

C. Object Storage

D. bare metal instance

From this, i think C and D correct. Is it right?

Please advice

Deepak — Instructor · 3 days ago Posted 3 days ago correct!

Mark as top answer SL Syed · 3 days ago Posted 3 days ago Thank you sir

Mark as helpful Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 SL Syed Updated 3 days ago Which is a customer's responsibility on an Oracle Cloud Infrastructure database?

Deepak,

As i understand, it is customer responsibility , we have to take care about creating the database and all.

What about Database and OS Patching? It is whose responsibility Is it Customer or Oracle?

Please clarify

by

S.Syed

Deepak — Instructor · 4 days ago Posted 4 days ago Database and OS is customer responsibility

Please refer to: https://www.oracle.com/webfolder/technetwork/tutorials/cloud_onboarding/Cloud_Onboarding_Guide_for%20IT_Organizations.pdf

Helpful (1) Mark as top answer SL

Syed · 4 days ago Posted 4 days ago Thank you sir

Mark as helpful Mark as top answer SL Syed · 4 days ago Posted 4 days ago Then this case

Which is a customer's responsibility on an Oracle Cloud Infrastructure database?

A. patching the database and OS

B. creating the first default database on the DBCS server

C. creating an ASM diskgroup for data file or temp file storage

D. installing the operating system (OS), Grid Infrastructure, and database software

Answer is A . Am i right sir?

Mark as helpful Mark as top answer Deepak — Instructor · 3 days ago Posted 3 days ago Correct!

Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 SL Syed Updated 4 days ago Load Balancing

Deepak

What are the cases the critical warning will be issued for Load Balancer?

For below case, Critical warning will be issued?

"The Backend Server VCN's Security List does not include the IP range for the source of the health check requests"

Please clarify

Deepak — Instructor · 4 days ago Posted 4 days ago Backend Server Health Summary

The Console list of a backend set's backend servers provides health status summaries that indicate the overall health of each backend server. The primary and standby load balancers both provide health check results that contribute to the health status. There are four levels of health status indicators. The meaning of each level is:

OK: The primary and standby load balancer health checks both return a status of OK.

WARNING: One health check returned a status of OK and one did not.

CRITICAL: Neither health check returned a status of OK.

UNKNOWN: One or both health checks returned a status of UNKNOWN or the system was unable to retrieve metrics.

***************************************************************************

A security list is misconfigured.

Health status indicators help you diagnose two cases of misconfigured security lists:

All entity health status indicators report OK, but traffic does not flow (as with misconfigured listeners). If the listener is not at fault, check the security list configuration.

All entity health statuses report as unhealthy. You have checked your health check configuration and your services run properly on your backend servers.

In this case, your security lists might not include the IP range for the source of the health check requests. You can find the health check source IP on the Details page for each backend server. You can also use the API to find the IP in the sourceIpAddress field of the HealthCheckResult object.

Note

Mark as top answer SL Syed · 4 days ago Posted 4 days ago thanks

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932Lecture - Explain the File Storage Service SL Syed Updated 7 days ago file system

Deepak

Oracle IAM controls which file systems are mountable by which instances.

Is above statement true in case of Oracle File Storage Service (FSS) Security?

Please clarify

by

S.Syed

Deepak — Instructor · 7 days ago Posted 7 days ago correct! https://docs.cloud.oracle.com/iaas/Content/File/Tasks/creatingfilesystems.htm?tocpath=Services%7CFile%20Storage%7C_____2

Mark as top answer SL Syed · 7 days ago Posted 7 days ago Thank you sir

Mark as helpful Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932Lecture - RAC LAB SL Syed Updated 7 days ago ASM 1 and ASM 2

Deepak

In your demo for RAC, In node -1, there is +ASM1 instance and In node-2 , there is +ASM2 and it seems shared disks are different.

I like to know how disks are shared between the instances in the lab case which you provided in the demo

Can you please clarify?

by

S.Syed

Deepak — Instructor · 7 days ago Posted 7 days ago Because we used the pAAS the storage server was provisioned by the platfoem. Both RAC1 and RAC2 will connect to the same storage cell

Mark as top answer SL Syed · 7 days ago Posted 7 days ago thanks

Mark as helpful Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932Lecture - RAC LAB SL

Syed Updated 7 days ago ASM

Deepak

ASM Instance is we have to create for configure the RAC in the cloud. Can you please some documentation for configure ASM in the cloud and how we have to configure RAW storage into ASM in the cloud

thanks

by

S.Syed

Deepak — Instructor · 7 days ago Posted 7 days ago Syed, it will take away from goal of becoming an Architect. Most probably you will be working with a DBA or if you come from a smaller company then you will have to work with your unix and storage team to get the ASM created.

As far you understand the concepts of the Database resources you should be good for the exam.

Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932Lecture - RAC LAB SL Syed Updated 7 days ago Login thru putty

Deepak,

All of your demo you are given, you are using SSH Key for to login node in the cloud.

My Question is, Can we login to the cloud with username/password? which mean without SSH key

Please clarify

Deepak — Instructor · 8 days ago Posted 8 days ago only way to navigate the whole of Cloud infra. is thru the console to manage the configuration of the instance you use putty

Mark as top answer SL Syed · 8 days ago Posted 8 days ago You mean to say, Without SSH Key, i can not login to the instance in putty?

Please clarify

Mark as helpful Mark as top answer Deepak — Instructor · 7 days ago Posted 7 days ago That is correct. They are key pairs you provide the public key when you create the instance and you use its counter part private key in putty

Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932Lecture - RAC LAB SL Syed Updated 8 days ago Oracle Edition

Deepak

What is difference between High Performance Edition and Extrem Performance Edition

Deepak — Instructor · 8 days ago Posted 8 days ago Please look thru the document for details.. https://www.oracle.com/technetwork/architect/cloud-infra-arch-wp.pdf

Mark as top answer SL Syed · 8 days ago Posted 8 days ago Thanks

Mark as helpful Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932Lecture - RAC LAB SL Syed Updated 8 days ago Mount Point in PaaS

Deepak,

In your dema for Mount Point in PaaS, you mentioned that all scripts like iScSI all done in background. Means, This will automatically takecare by Oracle in PaaS.

And What about IaaS, we have to do manually

I am confused

Can you clarify please?

thankx

by

S.Syed

Deepak — Instructor · 8 days ago Posted 8 days ago Yes that is correct . Example if you are building the database in IAAS you have provision the server and the DB system. In paas you can use the database as service

Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932Lecture - RAC LAB SL Syed Posted 9 days ago Instance

Deepak

For configuring RAC, First we have to create compute node and Object Storage, Am i right?

If yes, in your demo of RAC configuration, it taking IP automatically then where we have to enter the IPs of compute node and Where we have to enter Object Storage which means RAW disk for the ASM

Can you please clarify?

by

S.Syed

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932Lecture - Advanced Networking LAB - I SR Suraj Updated 9 days ago DRG- Customer premises equipment

Hi Deepak, I was able to create DRG and Customer premises equipment with random ip's, guess the error which you got in the lab is to do with service limit, probably you might have ran out of soft limit of creating those.

Regards

Suraj.

Deepak — Instructor · 2 months ago Posted 2 months ago Interesting did you have to raise the limit? would be interested in knowing and thanks for the update!

Mark as top answer SL Syed · 9 days ago Posted 9 days ago Deepak

I believe you reach the limit

Is there any possibility one complete video or documents for this exercise.

by

S.Syed

Mark as helpful Mark as top answer SL Syed · 9 days ago Posted 9 days ago Deepak,

I like to know, For integrating VCN with customer premises, What are IPs, we need to collect from the onside network engineer.

Can you provide the details

BY

S.Syed

Mark as helpful Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 P Patel_nikhil_c@yahoo.com Updated 17 days ago Where can I find practice questions dump ?

Where can I find practice questions dump ? Deepak — Instructor · 17 days ago Posted 17 days ago Nikhil, it is the last section, I am constantly updating.

Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932Lecture - Create, configure and mount a File Storage Service Prafulla Updated 23 days ago File Storage Service and Mounting

Ones we have created an Oracle File Storage Service , In which all places we can mount it ?

1. single subnet of our choice but is mountable by instances in all ADs within a region.

2. can provide a mount target in multiple subnets local to each AD within a region.

3. provides a mount target within a single subnet and is only accessible to instances in the AD of that subnet

I think point no. 3 is correct, as in video also I saw, it shows during file storage creation that mount option will be available only in that AD as the file storage is created.

Please let me know if my understanding is right or not ?

Also do share some links to read if possible.

Thank you.

Deepak — Instructor · 2 months ago Posted 2 months ago Regions and Availability Domains

You can use the File Storage service in all regions. For a list of supported regions, see Regions and Availability Domains.

When you create a mount target for a file system, you can share it among local bare metal and virtual Compute resources within a region. The service runs locally within each availability domain. When you create a file system or mount target, you specify the availability domain it is created in. Within an availability domain, the File Storage service uses synchronous replication and high availability failover to keep your data safe and available.

https://docs.cloud.oracle.com/iaas/Content/File/Concepts/filestorageoverview.htm

Let me know what you think after reading thru the link. Deepak

Helpful (1) Mark as top answer Prafulla · 2 months ago Posted 2 months ago As per my understanding of the topic, the correct option is 1 -- single subnet of our choice but is mountable by instances in all ADs within a region.

As per the link shared, an file storage service is mounted in one of the subnet but can be mounted in any AD's with the region where the file storage mount point was created.

Let me know if my understanding is right.

Mark as helpful Mark as top answer MS Manish · a month ago Answer Posted a month ago I think point no. 3 is correct, as in video also I saw, it shows during file storage creation that mount option will be available only in that AD as the file storage is created.

This hope is correct - In case you want to take it to any other AD backup of the storage is required post that you can use in any AD as required.

Mark as helpful Unmark as top answer Raj · 23 days ago Posted 23 days ago I agree 3 is the right answer, its also highlighted in Oracle Docs

Marked as helpful (1) Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 MS Manish Updated 23 days ago Which two are valid options when migrating a database from on-premise to Oracle Cloud Infrastructure?

Deepak — Instructor · a month ago Posted a month ago A and B

Mark as top answer Raj · 23 days ago Posted 23 days ago I think B & D is the right answer

Mark as helpful Mark as top answer Raj · 23 days ago Answer Posted 23 days ago Please see this blog in support of the right answer:

https://blogs.oracle.com/cloud-infrastructure/migrating-an-oracle-database-to-an-oracle-cloud-infrastructure-database-service-virtual-machine

Mark as helpful Unmark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 MS Manish Updated a month ago Which three are capabilities of the dbaascli utility? (Choose three.)

MS

Manish · a month ago Posted a month ago Answer for the above from my side are - A,C,D one of the options for C - is it use clone for applying the test patch not sure if that is added as one of the ANSWER in here ?

Mark as helpful Mark as top answer Deepak — Instructor · a month ago Posted a month ago Does not clearly state clone for patch so I think your answers are correct

Mark as top answer MS Manish · a month ago Posted a month ago

Mark as helpful Mark as top answer MS Manish · a month ago Posted a month ago reconfirming if "Clone" is an option?

Mark as helpful Mark as top answer Deepak — Instructor · a month ago Posted a month ago Clone would not be an option as it is used for patching ONLY and not create a copy of DB to access.

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 MS Manish Updated a month ago A new employee has just started working for your company. You create an Oracle Cloud Infrastructure user account for this employee, following which they are able to log in, but still cannot create any resources. What should you do to resolve this?

MS Manish · a month ago Posted a month ago

One of the opinion on the answer is C: Make sure that the employee is logging in to the Oracle Cloud Infrastructure account from corporate network only?

Mark as helpful Mark as top answer Deepak — Instructor · a month ago Posted a month ago D is the correct option, C should not matter beauty of cloud is should be available from anywhere, anytime

Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 MS Manish Updated a month ago How can you provide users access to an existing compartment?

Deepak — Instructor · a month ago Posted a month ago correct

Mark as top answer MS

Manish · a month ago Posted a month ago One of the options suggested over was "By adding users to a compartment. All users in the compartment will have access to the objects in the compartment" -- I dis-agree with this as privileges should flow through group and policies only whether its grant or revoke?

Mark as helpful Mark as top answer Deepak — Instructor · a month ago Posted a month ago Agreed!

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 MS Manish Updated a month ago You want an instance in you compartment to make API calls to other services within Oracle Cloud Infrastructure

MS Manish · a month ago Posted a month ago I would be looking out for Dynamic Groups that is option D

Mark as helpful Mark as top answer MS Manish · a month ago Answer Posted a month ago To me the answer is option D

Mark as helpful Unmark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932

MS Manish Updated a month ago Which two are NOT an image source when launching a new compute instance? (Choose two.)

Deepak — Instructor · a month ago Posted a month ago This should be object storage only

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932Lecture - VNIC MS Manish Updated a month ago An instance is launched with a primary VNIC

Deepak — Instructor

· a month ago Posted a month ago This is included in the quiz section I believe and should be A and D.

Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 MS Manish Updated a month ago You are responsible for setting up access for all the cloud users of a large enterprise

You are responsible for setting up access for all the cloud users of a large enterprise

MS

Manish · a month ago Posted a month ago My Choice is D - As an Administrator need to make sure subscribe to Ashburn , Need to create compartment in Ashburn, create policies to provide rights on compartment to user

Mark as helpful Mark as top answer Deepak — Instructor · a month ago Posted a month ago Manish, this is smart one, I think it should be D. See the FAQ for region..

https://docs.cloud.oracle.com/iaas/Content/Identity/Tasks/managingregions.htm

Helpful (1) Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 MS Manish Updated a month ago What does Terraform use to create, manage, and manipulate infrastructure resources?

Deepak — Instructor

· a month ago Posted a month ago Manish, looks like a tricky question. They already mention resources in the question itself, I would go with provider.

Terraform is used to create, manage, and update infrastructure resources such as physical machines, VMs, network switches, containers, and more. Almost any infrastructure type can be represented as a resource in Terraform. A provider is responsible for understanding API interactions and exposing resources.

Mark as top answer MS Manish · a month ago Answer Posted a month ago correct was confused with resource but correct is provider

Mark as helpful Unmark as top answer

Add an answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932Lecture - Use Terraform, Oracle Cloud Infrastructure CLI, and CHEF Prafulla Updated a month ago Which component CLI does not provide service?

I got this question in exam, and I feel all answers are wrong, please guide me on this.

Which service is NOT supported by Oracle Cloud Infrastructure CLI?

A. compute

B.database

C.block volumes

D. load balancer

As per OCI user guide - CHAPTER 22 Developer Tools >> CLI Help >> Supported Services and Licensing

Services supported:

o Audit

o Container Engine for Kubernetes

o Core Services (Networking, Compute, Block Volume)

o Database

o DNS

o Email Delivery

o File Storage

o IAM

o Load Balancing

o Object Storage

o Search

I see all 4 option listed in their. So which should be marked as NOT supported by OCI CLI ?

Deepak — Instructor · 2 months ago Posted 2 months ago There should be another option none of the above, as all the listed services are supported

Mark as top answer Prafulla

· 2 months ago Posted 2 months ago ok, thanks.

Mark as helpful Mark as top answer MS Manish · a month ago Posted a month ago Hi Prafulla - have you cleared the exam - msuri2005@gmail.com

Marked as helpful (1) Mark as top answer

Add an answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 MS Manish Updated a month ago Within your tenancy you have a compute instance with a boot volume and a block volume attached.

MS Manish · a month ago Answer Posted a month ago What I am looking out is Detach the Boot Volume and Block Volume, Increase the Boot Volume storage and instantiate a new instance and mount Block Volume so no "rsync" is required.

Mark as helpful Unmark as top answer

Add an answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 MK Mahesh Updated 2 months ago Deepak I don't lift and shift migration concept in part-II , please let me know was it included ?

Deepak — Instructor · 2 months ago Posted 2 months ago Mahesh, look at lectures 14 to 16, let me know if this is not what you are looking for.

Mark as top answer MK Mahesh · 2 months ago Posted 2 months ago https://youtu.be/FGrTodczsU0

For reference i am sharing above youtube video...

Mark as helpful Mark as top answer Deepak — Instructor · 2 months ago Posted 2 months ago Thanks Mahesh! This is more of DBaas more of paas service model but will not be part of your exam for IAAS certification but it is good to learn and nice video nicely done.

Mark as top answer MK Mahesh · 2 months ago Posted 2 months ago Hi Deepak, How do i register my free account to oracle support to raise oracle sr if i get any issue ???

Marked as helpful (1) Mark as top answer Deepak — Instructor

· 2 months ago Posted 2 months ago Good question Mahesh, link below should help you with the process.

https://docs.cloud.oracle.com/iaas/Content/GSG/Tasks/contactingsupport.htm?tocpath=Getting%20Started%7C_____16

Mark as top answer MK Mahesh · 2 months ago Posted 2 months ago Hi deepak,

I want to migrate the db by using active duplicate from on premises to cloud ...

What is the process to establish network between on-prem to cloud ..means unable to do ping the cloud ip address

Mark as helpful Mark as top answer Deepak — Instructor · 2 months ago Posted 2 months ago Mahesh, look thru the advanced networking in part 2 training, it is not practical to perform that in the LAB but you can simulate by using different networks withing the OCI

Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 TP Terry Updated 2 months ago Misleading Question on Resources tied to AD

The question “Which resource is tied to an Availability Domain?” has an inaccurate answer because subnets can now stretch across Availability Domains. General availability is September 28th Deepak — Instructor · 2 months ago Posted 2 months ago

Thanks Terry, will get it updated Where did you see the update at? Mark as top answer TP Terry · 2 months ago Posted 2 months ago I’m working on a leading cloud deployment, so working closely with the product team given our client demands we are pushing for features in the London region Mark as helpful Mark as top answer Deepak — Instructor · 2 months ago Posted 2 months ago Wow Terry, very impressive! Please if possible please share your experiences and new updates with the students and me.

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932Lecture - Chef SR Suraj Updated 2 months ago chef lab

Hello,

knife cookbook site download fb_helper , it seems this is not available to download.

Regards

Suraj.

Deepak — Instructor · 2 months ago Posted 2 months ago Suraj, what is the error?

Mark as top answer

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 MS Mukesh Updated 4 months ago Missing topics

Hi Deepak, I see file storage service, exadata configurations on oci and Terraform are not covered yet that is related to OCI cert. Any plan to cover the same?

Deepak — Instructor · 4 months ago Posted 4 months ago Yes mukesh it is WIP, please keep checking the site I will add topics as completed. Not sure if you get an update if a lecture is added/modified.

Mark as top answer RG Rajiv · 4 months ago Posted 4 months ago Is Terraforms Added to the course ?

Mark as helpful Mark as top answer Deepak — Instructor · 4 months ago Posted 4 months ago Not yet will be soon..

Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 RG Rajiv Updated 4 months ago Deepak when can we expect Oracle Cloud Infrastructure Associate Arch. Part II 1Z0-932 completed? Want to take the Certification exam.

Deepak — Instructor

· 4 months ago Posted 4 months ago I would say by end of the month, I am all set with the material but waiting on Oracle support to increase the limit on my Oracle account. I have been getting the run around for last couple of weeks.

Mark as top answer RG Rajiv · 4 months ago Posted 4 months ago I love the way you are explaining Part II 1Z0-932. Will this course be updated as you upload new modules ?

Mark as helpful Mark as top answer Deepak — Instructor · 4 months ago Posted 4 months ago Thank you Rajiv! Work in progress some hurdles but they will go away soon.

Helpful (2) Mark as top answer

Add an answer