Optional Support tray

HULME MARTIN HEAT SEALERS

Stand Up Pouch Sealer

When sealing liquids, powders, sauces, soup, tubes and stand up pouches

it has always been a little difficult – your problem is solved!

Our Stand Up Pouch Sealer has been specifically designed to seal

laminated pouches and tubes keeping them in the upright position. It is a

freestanding vertical sealer, which has been designed and manufactured

by Hulme Martin Heat Sealers. The sealing head is adjustable in relation

to the work surface for various sized pouches, bags and tubes.

It offers a 320mm x 6mm seal with both sealing jaws heated to cope with

the most demanding of materials. The sealing height is adjustable, from

50 to 350mm from the work surface and 50 to 250mm with the optional

adjustable product support. Special stands can be manufactured with

greater adjustment on request. The seal jaws open 25mm, which helps to

ensure the bags closes and seal evenly when the bag is filled. As the jaws

are parallel to the work surface the seal is square along the top of the bag.

The Pouch sealer is operated via a single operating handle that locks into

position and is easily released once the sealing cycle is complete. It can

be operated with very little effort. It is designed with special pressure jaw

arms, which ensures a good sealing pressure along the full length of the

seal jaws. The easy to operate handle offers a holding force of 180Kg and

with the specifically designed linkage increasing this to over 250Kg of

pressure, ensuring a great seal every time.

As you can see from the side

view picture of the sealing

jaws, both heating jaws move

together. Rather than a

traditional design of one fixed

jaw and one moving, by

having both jaws moving

helps with the equal closure of

the bag opening giving less

opportunity for the bag to

crease and produce holes in

the seal. The opening between

the jaws is only 25mm so when the bag is positioned into the sealer it

leaves less possibility for the bag to fold over on itself.

We use high quality components and manufacture the machines in the

UK at our site in Surrey, to our strict quality procedures. The machines

are manufactured from mild steel and have a high gloss white powder

coat hardwearing finish. The machines are CE marked and comply with

RoHS regulations. All our machines are fully portable appliance tested

and put through our rigorous quality procedures to ensure they offer

many years of reliable service.

Spares and consumable items are easy to replace by the user and

replacement parts are always available from stock. As a UK manufacturer

of heat sealing machines for over 60 years we know our reputation relies

on supplying a high quality service to our customers at the right price.

Heating elements are simply changed by removing the jaw cover, fitting a

locking pin to hold the sprung expansion brackets undoing a couple of

nuts and replacing with a new wire and barrier tape – serviced in under 4

minutes!

If you use several sizes of pouches or bags then the optional product

support can be invaluable. This allows the head of the sealing machine to

be positioned in its highest position and the shelf is simply adjusted up

and down the frame for the correct positioning of the seal on the bag. The

product can then be slid in from the side and open end of the sealing jaws

for quick easy loading of the machine. It also assists if you want to seal a

few smaller bags at a time. The adjustable product support also comes

with a backstop to help locate the bags into the machine.

Our sealers are commonly used for:-

� Sauces and Soups

� Coffee Pouches

� Engineered Components

� Sweets and Confectionery

� Bird Nuts and Seed

� Waste products

� Medical drugs

� Medical supplies

� Police evidence bags

TUBE SEALER

The machine can also be used to seal polyethylene, laminated and

polypropylene tubes. By using the optional product support with specially

designed tube holders several tubes can be sealed at the same time.

With a simple operating lever that locks into position during the sealing

cycle this machine is ideal to seal tubes. Both seal jaws are heated to

ensure a high quality seal is produced on the top of the tube. By using a

6mm wide element wire the tubes can be positioned so the open edge of

the tube is sealed giving a professional smooth finish.

Both of the sealing jaws move together with the final sealing position

being central to the tube, this helps with the alignment of the seal as the

tube is not twisted off centre. With the adjustable shelf alignment guides

it can be used with bespoke tube holders made for your tubes, this

enables easy loading of a few tubes at a time to reduce production times.

The Tube support holder holds the tubes securely whilst filling and can

then be slid from the side if the

machine into the sealing position, by

simply closing the handle the pressure

is applied along the full length of the

sealing jaws to seal all the tubes

evenly.

Whilst the tube holder is not essential

as shown it helps with the quick

positioning of the tubes. The High

pressure produced through the

operating handle can also squeeze out

small amounts of liquids whilst

sealing the tube.

The Hulme Martin Stand Up Pouch / Tube Sealer is the new addition of

our expanding range of quality Heat Sealing machines, all of which we

manufacture in the UK. Our range of heat sealers range from a simple

230mm hand operated model to a 760mm foot pedal operated machine.

We have been manufacturing machines for over 60 years and the quality

and reliability of our machines reflect the experience gained over those

years.

The machines are CE marked and comply with RoHS requirements.

Hulme Martin Heat Sealers Duty of Care Directive 2002/95/EC on the restriction of the use of certain hazardous substances in

Electrical and Electronic Equipment(RoHS) The RoHS Directive stands for "the restriction of the use of certain hazardous substances in electrical and electronic equipment". This Directive bans the placing on the EU market of new electrical and electronic equipment containing more than agreed levels of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants.

All machines manufactured from 1st April 2006 comply with the above directive.

Directive 2002/96/EC on Waste Electrical and Electronic Equipment

(WEEE) The WEEE Directive aims to reduce the quantity of waste from electrical and

electronic equipment and increase its re-use, recovery and recycling. From 1

st March 2007 Hulme Martin machines are marked with the ‘crossed out wheeled bin symbol’ to

ensure they are dealt with separately from general waste We can arrange to collect machines that are

no longer required and ensure they are either recycled or disposed safely. We will record details of all

collected and recycled machines.

WEEE REG No WEE/DB1381SS

Packaging Directive Directive 2004/12/EC (94/62/EC). Whilst we are not required to register under this directive we use

minimal packaging to ensure your purchase reaches you in a first class condition. Packaging used has

been recycled wherever possible and can be reused or recycled by the receiver.

EC Declaration of Conformity Machinery Directive 2006/42/EC

The Low Voltage Directive 2006/95/EC

Electromagnetic compatibility directive 2004/108/EC.

Our machines comply with the above directives. All new machines are built to a high

standard and subjected to visual and electrical tests at several stages during their

manufacture. Once assembled we produce test seals to ensure quality standards are

met. Finally every machine is Portable Appliance Tested to ensure electrical safety

requirements are met.

ISO 9000 Quality Management Hulme Martin Heat Sealers Ltd operates from documented quality management systems to ensure we meet our customers’ requirements. We conform to the required directives as listed above, and our equipment meets CE requirements. Customers are welcome to visit our factory to inspect our documentation and manuals.

ISO 14000 Environmental Management

Hulme Martin Heat Sealers ensures its activities causes minimal effects on the environment. We continually monitor our practices to achieve the best possible improvement on our environmental performance.

For further information please contact us:-

Hulme Martin Heat Sealers Ltd

Unit 5b, Country Business Centre White Cottage Farm Lucas Green Road

West End Woking Surrey

GU24 9LZ

www.hulmemartin.co.uk

Email: info@hulmemartin.co.uk

Tel: 01483 476767

Fax: 01483 486343

We are always happy to receive any sample that you may want to be tested to ensure

the machine will meet your expectations.