Upload
others
View
68
Download
0
Embed Size (px)
Citation preview
Operation Manual
Emergency Panel
EP-616
* Rack mount products in the Western Hemisphere(North America, South America, and the Caribbean)do not have handles installed due to customer preference.
EMERGENCY PANEL
WelcomeWelcomeA personal welcome to you from the management and employees of Inter-M
All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value,and we are delighted you have purchased one of our products.
We sincerely trust this product will provide years of satisfactory service, but if anything is not to your completesatisfaction, we will endeavor to make things right.
Welcome to Inter-M, and thank you for becoming part of our worldwide extended family!
* It can be heated up if you use this product in closed box or ill-ventilated place.
RISK OF ELECTRIC SHOCKDO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
To prevent fire or shock hazard, do notexpose the unit to rain or moisture.
*Do not install this equipment in a confined space such as a book case or similar unit.*The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such vases, shall be placed on the apparatus.*WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING-WATER AND MOISTURE: Unit should not be used near water(e.g.near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so than objects donot fall and liquids are not spilled into the enclosure through openings.
*CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform anyservicing other than that contained in the operating instructions unless you are qualified to do so.NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercialenvironment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with theinstruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to causeharmful interference in which case the user will be required to correct the interference at his own expense.
This symbol is intended to alert the user to thepresence of uninsulated “dangerous voltage” withinthe product’s enclosure that may be of sufficientmagnitude to constitute a risk of electric shock topersons.
This symbol is intended to alert the user to thepresence of important operation and maintenance(servicing) instructions in the literature accompanyingthe appliance.
CAUTION:To prevent electric shock do not use this (polarized) plug withan extension cord, receptacle or other outlet unless theblades can be fully inserted to prevent blade exposure.
Attentions: Pour prévenir les chocs électriques ne pas utiliser cettefiche polarisée avec un prolongateur, une prise de couranton une autre sortie de courant, sauf si les lames peuventétre insérées à fond sans en laisser aucune partie àdécouvert.
EMERGENCY PANEL
1EP-616
ContentsContentsUnpacking .......................................................................................................................................2
InstallationEnvironment....................................................................................................................................2Important Safety Instructions.............................................................................................................2
Features............................................................................................................................................3
Operation ........................................................................................................................................3
Front Panel ......................................................................................................................................4
Rear Panel .......................................................................................................................................5
Suggestions for Rack Installation ................................................................................................7
Applications ....................................................................................................................................8
Block Diagram ................................................................................................................................9
Specifications ................................................................................................................................10
ServiceProcedures....................................................................................................................................11Schematic .....................................................................................................................................11Parts List .......................................................................................................................................11
Warranty .......................................................................................................................................11
Unpacking
EMERGENCY PANEL
2 EP-616
UnpackingAlthough your EP-616 is neither complicated nor difficult to operate, we recommend you take a few minutes toread this brief manual and familiarize yourself with the important information regarding product features, setupand operation.
As with most electronic devices, we strongly recommend you retain the original packaging. In the unlikely eventthe product must be returned for servicing, the original packaging (or reasonable equivalent) is required.
InstallationInstallationEnvironmentNever place this product in an environment which could alter its performance or reduce its service life. Suchenvironments usually include high levels of heat, dust, moisture, and vibration.
IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wideblade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consultan electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, andthe point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug isdamaged, liquid has been spilled or objects have fallen into the apparatus, theapparatus has been exposed to rain or moisture, does not operate normally, or hasbeen dropped. S3125A
S3125A
EMERGENCY PANEL
3EP-616
FeaturesFeatures
Operation
Features- FIRE ALARMConnect to a fire sensor for a fully functional fire alarm.
- AUTO OPERATING FUNCTIONAlarm will sound automatically on alternate floors.
- AUTO ANNOUNCEMENTMake automatic announcements during fire alarm operations.
- TEST FUNCTIONUse the test function for system tests or to conduct emergency drills.
Operation1. Switch off the EP-616 Power Switch.
2. Select either External mode or Internal mode before installing the system.
3. Using the TEST SWITCH, an alarm is broadcast through the built-in speaker.
4. Test the microphone, setting the MIC VOLUME as desired.
NOTE : The Pre-Amp Input, Remote 1 and 2 Input, Timer Input, and Auto-Ann Input are sent to the PREOUT in the following priority.
Priority Input Signal
1 Auto-Ann
2 Timer
3 Remote 1
4 Remote 2
5 Pre-Amp
EMERGENCY PANEL
4 EP-616
Front PanelFront Panel
1. TEST SWITCHThis switch is used for checking and testing the system. When the switch is pressed, the relevant LED lights up.
2. MIC / MIC SWITCHCondenser microphone is attached on the panel. It is activated by switching on.
3. OUTPUT INDICATOR LEDThis LED will light when it detects a nominal output level.
4. STANDBY INDICATOR LEDThis LED will light to indicate that power has been applied to the unit, and the unit is in Standby mode.
5. MIC VOLUMEThis knob controls the mic output volume. Rotating in a clockwise direction increases volume.
6. FIRE INDICATOR LEDThis panel indicates when a fire has been detected.
1 2 3
4 5 6
EMERGENCY PANEL
5EP-616
Rear PanelRear Panel
1. MIC TERMINALThis socket is for the dynamic microphone connection(optional).
NOTE : Before purchasing a microphone, please make sure it is compatible with the socket.(refer to the drawing below). Recommended microphone by Inter-M will be desirable.
2. MATRIX CONNECTORThis multi-pin EMG jack is for the connection of an external timer, such as the Inter-M ECS-616.
3. REMOTE MIC TERMINALConnect an external microphone to this terminal. The external mic is active when the remote mic switch (4) isset to external.
4. REMOTE MIC SWITCHThis switch is used to set the mic mode to either External or Internal. When set to Internal, the front panelbuilt-in mic is active. Use the External setting when you wish to connect an external microphone to the RemoteMic Terminal (3), defeating the built-in mic.
NOTE : Please be aware of the disposition of the terminal (SIG, GND, SW +/-) before connecting.
5. DC 24V OUT TERMINALThis terminal is used for connecting to the DC 24V OUT terminal of an auto-broadcasting system.It can only be operated with external auto-broadcasting.
EMERGENCY PANEL
6 EP-616
6. AUTO ANN SELECTOR SWITCHThis switch is used to set the auto announcement mode to either external or internal.
7. SIREN VOLUMEThis knob controls the siren level, triggered during emergency. Clockwise rotation increases volume. (-12dB ~ 0dB)
8. PRE-AMP INPUT JACKThis jack is used to connect the output of a pre-amplifier.
9. REMOTE 1, 2 INPUT JACKSThese jacks are used to connect the output of a pre-amplifier to REMOTE 1 and REMOTE 2.
10. TIMER INPUT JACKThis jack is for the connection of an external timer, such as the Inter-M PW-642.
11. AUTO ANN INPUT JACKConnect the output of an auto broadcasting system (or a cassette deck or other line level device) to thisbalanced XLR input jack. This input is active when the AUTO ANN SELECTOR SWITCH (6) is set to external.
12. PRE OUT JACKThis balanced XLR jack carries the pre-amp out signal, and is used to make a mono connection to the mainamplifier and speakers.
EMERGENCY PANEL
7EP-616
Suggestions for Rack InstallationSuggestions for Rack Installation1. Switch off power to the EP-616 before installing the system.
2. Connect the Inter-M ECS-616 to the MATRIX CONNECTOR (2) on the rear panel.
3. Connect the PRE OUT jack (12) to the input of your main amplifier.
4. Connect audio output of your auto broadcasting system to the AUTO ANN INPUT jack (11), and the DC 24Vinput jack of your auto broadcasting system to the DC 24V terminal jack (5) of the EP-616.
5. Connect the output jack of the Inter-M PW-642 to the TIMER INPUT jack (10).
6. Connect the output of your remote pre-amp to the REMOTE INPUT jacks (9) and the pre-amp of the mainbroadcasting system to the PRE-AMP INPUT jack (8).
7. If using a remote mic, connect the microphone and switch to the rear panel REMOTE MIC TERMINAL (3) andREMOTE MIC SWITCH (4).
TABLE 1 : MATRIX CONNECTOR PIN NO. & FUNCTION.
COM
EM SUM
RM2 SUM
+24V
TIMER SUM
FIRE SUM
+24V
RM1 SUM
EMERGENCY PANEL
8 EP-616
ApplicationsApplications
The shape of outlets can be different according to country requirements.
EMERGENCY PANEL
9EP-616
Block DiagramBlock Diagram
EMERGENCY PANEL
10 EP-616
EP-616
Operating Modes Auto, Test
Siren Frequency 800Hz (Oscillating siren tone)
Program Exchange Mode Business, RM1, RM2, Timer, EMG.
Operation Temperature -10°C ~ +40°C
Power Source 24V DC
Power Consumption 720mA
Weight (SET) 4.6kg/10.5lb
Dimensions (SET) 482(W)x88(H)x380(D)mm / 19(W)x3.5(H)x15(D)in
* Specifications and design are subject to change without notice.
SpecificationsSpecifications
EMERGENCY PANEL
ServiceService
ProceduresTake steps to insure the problem is not related to operator error or other products within the system. Informationprovided in the troubleshooting portion of this manual may help with this process. Once it is certain that theproblem is related to the product contact your warranty provider as described in the warranty section of thismanual.
SchematicA Schematic is available by contacting your warranty provider.
Parts ListA Parts List is available by contacting your warranty provider.
WarrantyWarranty
Warranty terms and conditions vary by country and may not be the same for all products. Terms and conditionsof warranty for a given product may be determined first by locating the appropriate country which the productwas purchased in, then by locating the product type.
To obtain specific warranty information and available service locations contact Inter-M directly or theauthorized Inter-M Distributor for your specific country or region.
11EP-616
MADE IN KOREADecember 2007 9000001221 A
Inter-M, Ltd. (Korea) began operations in 1983.
Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world.
Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).
The company is no longer just a Korean company, but rather a global company that is truly international in scope, with factories and offices in Korea and China, and sales and marketing operations located in Japan, Europe, and the U.S.A.
With more than 850 employees around the globe,Inter-M is well-poised for further growth and expansion.
Inter-M Americas, Inc. 13875 Artesia Blvd. Cerritos, CA 90703 USATEL : +1-562-921-0313, FAX : +1-562-921-0370Home Page : http://www.inter-m.net, E-mail : [email protected]
Inter-M CorporationSeoul OFFICE:653-5 BANGHAK-DONG, DOBONG-KU, SEOUL, KOREA TEL : +82-2-2289-8140~8, FAX : +82-2-2289-8149Home Page : http://www.inter-m.com, E-mail : [email protected]