Upload
dstoic1
View
215
Download
0
Embed Size (px)
Citation preview
GRASS KATALOG
GRASS KATALOG
KINVARO T-65 KINVARO T-71
KINVARO F-20
KINVARO T-76
Spojnice Tiomos i Nexis click-on Vodi
lice
Dyn
amoo
v i o
bičn
e
Integra top vodilice Nova Pro ladice Kinv
aro
podi
zni s
usta
vi
SADRŽAJ:
Spojnice Tiomos i Nexis click-on ...................01
Vodilice Dynamoov i obične.........................07
Integra top vodilice.....................................10
Nova Pro ladice..........................................12
Kinvaro podizni sustavi................................19
4
Spojnice Tiomos i Nexis click-on
All dimensions in millimetres. Subject to changes THE CATALOGUE Grass 9105-2011
1
2
3
4
5
6
7
8
Hinge sysTemsTiomos 120 120° Hinge
insTAllATion informATion All dimensions in millimetres
Full overlay K0 Overlay K3 Half overlay K9.5 Inset1 K19
12.5 13
84.5
3-7
F
24
84.5
3-7
24
F15.5 10 3.522
84.5
31
2 x F F
3-7
86
40.5
F
3-7
31.5
Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 21 Set mounting plate back by door
thickness +1.5 mm
Doo
r ov
erla
y
0Cup distance
3 4 5 6 722.0 021.0 020.0 0 219.0 0 2 318.5 3.518.0 0 2 317.5 3.517.0 2 316.5 3.516.0 2 315.5 3.515.0 314.5 3.5
Mounting plate height
Doo
r ov
erla
y
3Cup distance
3 4 5 6 719.0 018.0 017.0 0 216.516.0 0 2 315.5 3.515.0 0 2 314.5 3.514.0 2 313.5 3.513.0 2 312.5 3.512.0 311.5 3.5
Mounting plate height
Doo
r ov
erla
y
9.5Cup distance
3 4 5 6 712.5 011.5 010.5 0 210.09.5 0 2 39.0 3.58.5 0 2 38.0 3.57.5 2 37.0 3.56.5 2 36.0 3.55.5 35.0 3.5
Mounting plate height
Doo
r re
veal
19Cup distance
3 4 5 6 70.0 0 2 30.5 3.51.0 0 2 31.5 3.52.0 2 33.0 2 34.0 3
Mounting plate height
minimum gAp
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 1.22 2.12 3.02 3.92 4.72
22.0 1.0 1.12 2.02 2.92 3.82
21.0 1.0 1.0 1.62 2.42 3.32
20.0 1.0 1.0 1.12 2.02 2.92
19.0 1.0 1.0 1.0 1.52 2.42
18.0 1.0 1.0 1.0 1.0 1.92
17.0 1.0 1.0 1.0 1.0 1.52
16.0 1.0 1.0 1.0 1.0 1.0
Minimum gap2 1.0 at 85° opening angle
minimum reveAl
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 6.4 5.4 4.4 3.4 2.422.0 3.0 2.0 1.5 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 0.6 0.6 0.6 0.6 0.616.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F)
85° opening Angle
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
36.0 11.1 10.3 9.7 9.1 8.530.0 5.4 4.8 4.4 4.3 4.228.0 3.7 3.6 3.5 3.4 3.326.0 2.9 2.8 2.8 2.7 2.624.0 2.2 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.716.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F) 3 at 85°3 85° opening angle reduction clip
noTes
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
For door thicknesses of 24 mm and above, a trial fitting is recommended.
drilling pATTerns 45/9.5
Screw fixing Press fitting
9.5
45
35+0.1
45
8 9.5
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
Cup dimensions
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
0203
• sa i bez integriranog ublaživača• kut otvaranja 110°• za vrata do debljine 24 mm• 3-D podešavanje uz odgovarajuću pločicu
Br. artikla Opis artikla JMCijena bez
PDV-aPDV
Cijena sa PDV-om
1078458 Spojnica ravna Tiomos, 110°, bez ublaživača
kom
8,43 25% 10,54
1078461 Spojnica ravna Tiomos, 110°, bez ublaživača, na tiplicu 9,82 25% 12,27
1078459 Spojnica polukriva Tiomos, 110°, bez ublaživača 9,14 25% 11,42
1078460 Spojnica kriva Tiomos, 110°, bez ublaživača 10,62 25% 13,27
1078520 Spojnica ravna Tiomos, 110°, sa ublaživačem 16,56 25% 20,70
1078523 Spojnica ravna Tiomos, 110°, sa ublaživačem, na tiplicu 17,46 25% 21,83
1078521 Spojnica polukriva Tiomos, 110°, sa ublaživačem 16,80 25% 21,00
1078522 Spojnica kriva Tiomos, 110°, sa ublaživačem 18,28 25% 22,85
Tiomos 110.110° hinge(door thicknesses up to 24 mm)
Grass THE CATALOGUE Packaging units are not covered in this catalogue; please enquire with your supplier86 05-2011
1
2
3
4
5
6
7
8
Tiomos 110 110° hinge (door thicknesses up to 24 mm)
•110° opening angle•Optimum reveals for door thicknesses
up to 24 mm•Convenient depth adjustment
via worm gear•3-dimensional adjustment with
appropriate mounting plate
Available in 3 versions:•With integrated damper
(3 adjustable damping levels)• Without integrated damper•Without self-closing mechanism
(without spring)
110°
order informATion for drilling pATTern 45/9.5
Door overlay View CrankingDamper
without spring
Item No.
with withoutClick-on
Screw fixingClick-on
Press fittingImpresso
without tools
Full overlay 1 0
■ - - f028138519 f028138523 f017139329
- ■ - f045138457 f045138461 f034139300
- ■ ■ f046138579 – f035139357
Overlay 1 3
■ - - f028138520 f028138524 f017139330
- ■ - f045138458 f045138462 f034139301
- ■ ■ f046138580 – f035139358
Half overlay 2 9.5
■ - - f028138521 f028138525 f017139331
- ■ - f045138459 f045138463 f034139302
- ■ ■ f046138581 – f035139359
Inset 2 19
■ - - f028138522 f028138526 f017139332
- ■ - f045138460 f045138464 f034139303
- ■ ■ f046138582 – f0351393601 Cup material: steel, nickel-plated / Arm material: steel, nickel-plated2 Cup material: steel, nickel-plated / Arm material: Zamak, nickel-plated
Cover CAps
Designation Cranking Imprinted/Embossed
Item No.
Hinge arm cover cap, steel, nickel-plated, not imprinted 0/3/9.5/19 On request f072135500
Hinge arm cover cap, steel, long, nickel-plated, not imprinted 0/3 On request f072135504
Hinge cup cover cap, steel, nickel-plated, not imprinted 0/3/9.5/19 – f072135503
ACCessories
Designation Item No.
85° opening angle reduction clip f072135751
Tipmatic Pin for wooden and aluminium frame doors
f069068873
Designation Item No.
Countersunk wood screw Ø 3.5 x 15 mm
f146073976
Tiomos mounting plates 144
Accessories 150
Tipmatic 344
Technical information 152
Assembly aids 794
TIOMOS SPOJNICE
TEHNIČKE UPUTE ZA MONTAŽU I UGRADNJU
POTPuNO PREkRIVANJE DJElOMIčNO PREkRIVANJE
All dimensions in millimetres. Subject to changes THE CATALOGUE Grass 8705-2011
1
2
3
4
5
6
7
8
Hinge sysTemsTiomos 110 110° Hinge
insTAllATion informATion All dimensions in millimetres
Full overlay K0 Overlay K3 Half overlay K9.5 Inset1 K19
84.5
3-7
F12
24
13F
84.5
3-7
24
15 10
3-7
84.5
31
2 x F21.5
F3.5 31
86
40.5
F
3-7
Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 21 Set mounting plate back by door
thickness +1.5 mm
Doo
r ov
erla
y 0
Cup distance3 4 5 6 7
22.0 021.0 020.0 0 219.0 0 2 318.5 3.518.0 0 2 317.5 3.517.0 2 316.5 3.516.0 2 315.5 3.515.0 314.5 3.5
Mounting plate height
Doo
r ov
erla
y
3Cup distance
3 4 5 6 719.0 018.0 017.0 0 216.516.0 0 2 315.5 3.515.0 0 2 314.5 3.514.0 2 313.5 3.513.0 2 312.5 3.512.0 311.5 3.5
Mounting plate height
Doo
r ov
erla
y
9.5Cup distance
3 4 5 6 712.5 011.5 010.5 0 210.09.5 0 2 39.0 3.58.5 0 2 38.0 3.57.5 2 37.0 3.56.5 2 36.0 3.55.5 35.0 3.5
Mounting plate height
Doo
r re
veal
19Cup distance
3 4 5 6 70.0 0 2 30.5 3.51.0 0 2 31.5 3.52.0 2 33.0 2 34.0 3
Mounting plate height
minimum gAp
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 1.0 1.0 1.0 1.22 2.12
22.0 1.0 1.0 1.0 1.0 1.52
21.0 1.0 1.0 1.0 1.0 1.22
20.0 1.0 1.0 1.0 1.0 1.019.0 1.0 1.0 1.0 1.0 1.018.0 1.0 1.0 1.0 1.0 1.017.0 1.0 1.0 1.0 1.0 1.016.0 1.0 1.0 1.0 1.0 1.0
Minimum gap2 1.0 at 85° opening angle
minimum reveAl
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 2.4 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 0.6 0.6 0.6 0.6 0.616.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F)
85° opening Angle
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
36.0 11.1 10.3 9.7 9.1 8.530.0 5.4 4.8 4.4 4.3 4.228.0 3.7 3.6 3.5 3.4 3.326.0 2.9 2.8 2.8 2.7 2.624.0 2.2 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.716.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F) 3 at 85°3 85° opening angle reduction clip
noTes
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
For door thicknesses of 24 mm and above, a trial fitting is recommended.
drilling pATTerns 45/9.5
Screw fixing Press fitting
9.5
45
35+0.1
45
8 9.5
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
Cup dimensions
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Udaljenost čašice
Visina montažne pločice
Prek
lop vr
ata
All dimensions in millimetres. Subject to changes THE CATALOGUE Grass 8705-2011
1
2
3
4
5
6
7
8
Hinge sysTemsTiomos 110 110° Hinge
insTAllATion informATion All dimensions in millimetres
Full overlay K0 Overlay K3 Half overlay K9.5 Inset1 K19
84.5
3-7
F12
24
13F
84.5
3-7
24
15 10
3-7
84.5
31
2 x F21.5
F3.5 31
86
40.5
F
3-7
Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 21 Set mounting plate back by door
thickness +1.5 mm
Doo
r ov
erla
y
0Cup distance
3 4 5 6 722.0 021.0 020.0 0 219.0 0 2 318.5 3.518.0 0 2 317.5 3.517.0 2 316.5 3.516.0 2 315.5 3.515.0 314.5 3.5
Mounting plate height
Doo
r ov
erla
y
3Cup distance
3 4 5 6 719.0 018.0 017.0 0 216.516.0 0 2 315.5 3.515.0 0 2 314.5 3.514.0 2 313.5 3.513.0 2 312.5 3.512.0 311.5 3.5
Mounting plate height
Doo
r ov
erla
y
9.5Cup distance
3 4 5 6 712.5 011.5 010.5 0 210.09.5 0 2 39.0 3.58.5 0 2 38.0 3.57.5 2 37.0 3.56.5 2 36.0 3.55.5 35.0 3.5
Mounting plate height
Doo
r re
veal
19Cup distance
3 4 5 6 70.0 0 2 30.5 3.51.0 0 2 31.5 3.52.0 2 33.0 2 34.0 3
Mounting plate height
minimum gAp
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 1.0 1.0 1.0 1.22 2.12
22.0 1.0 1.0 1.0 1.0 1.52
21.0 1.0 1.0 1.0 1.0 1.22
20.0 1.0 1.0 1.0 1.0 1.019.0 1.0 1.0 1.0 1.0 1.018.0 1.0 1.0 1.0 1.0 1.017.0 1.0 1.0 1.0 1.0 1.016.0 1.0 1.0 1.0 1.0 1.0
Minimum gap2 1.0 at 85° opening angle
minimum reveAl
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 2.4 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 0.6 0.6 0.6 0.6 0.616.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F)
85° opening AngleD
oor
thic
knes
sCup distance
3 4 5 6 736.0 11.1 10.3 9.7 9.1 8.530.0 5.4 4.8 4.4 4.3 4.228.0 3.7 3.6 3.5 3.4 3.326.0 2.9 2.8 2.8 2.7 2.624.0 2.2 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.716.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F) 3 at 85°3 85° opening angle reduction clip
noTes
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
For door thicknesses of 24 mm and above, a trial fitting is recommended.
drilling pATTerns 45/9.5
Screw fixing Press fitting
9.5
45
35+0.1
45
8 9.5
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
Cup dimensions
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
All dimensions in millimetres. Subject to changes THE CATALOGUE Grass 8705-2011
1
2
3
4
5
6
7
8
Hinge sysTemsTiomos 110 110° Hinge
insTAllATion informATion All dimensions in millimetres
Full overlay K0 Overlay K3 Half overlay K9.5 Inset1 K19
84.5
3-7
F12
24
13F
84.5
3-7
24
15 10
3-7
84.5
31
2 x F21.5
F3.5 31
86
40.5
F
3-7
Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 21 Set mounting plate back by door
thickness +1.5 mmD
oor
over
lay
0Cup distance
3 4 5 6 722.0 021.0 020.0 0 219.0 0 2 318.5 3.518.0 0 2 317.5 3.517.0 2 316.5 3.516.0 2 315.5 3.515.0 314.5 3.5
Mounting plate height
Doo
r ov
erla
y
3Cup distance
3 4 5 6 719.0 018.0 017.0 0 216.516.0 0 2 315.5 3.515.0 0 2 314.5 3.514.0 2 313.5 3.513.0 2 312.5 3.512.0 311.5 3.5
Mounting plate height
Doo
r ov
erla
y
9.5Cup distance
3 4 5 6 712.5 011.5 010.5 0 210.09.5 0 2 39.0 3.58.5 0 2 38.0 3.57.5 2 37.0 3.56.5 2 36.0 3.55.5 35.0 3.5
Mounting plate height
Doo
r re
veal
19Cup distance
3 4 5 6 70.0 0 2 30.5 3.51.0 0 2 31.5 3.52.0 2 33.0 2 34.0 3
Mounting plate height
minimum gAp
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 1.0 1.0 1.0 1.22 2.12
22.0 1.0 1.0 1.0 1.0 1.52
21.0 1.0 1.0 1.0 1.0 1.22
20.0 1.0 1.0 1.0 1.0 1.019.0 1.0 1.0 1.0 1.0 1.018.0 1.0 1.0 1.0 1.0 1.017.0 1.0 1.0 1.0 1.0 1.016.0 1.0 1.0 1.0 1.0 1.0
Minimum gap2 1.0 at 85° opening angle
minimum reveAl
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 2.4 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 0.6 0.6 0.6 0.6 0.616.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F)
85° opening Angle
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
36.0 11.1 10.3 9.7 9.1 8.530.0 5.4 4.8 4.4 4.3 4.228.0 3.7 3.6 3.5 3.4 3.326.0 2.9 2.8 2.8 2.7 2.624.0 2.2 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.716.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F) 3 at 85°3 85° opening angle reduction clip
noTes
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
For door thicknesses of 24 mm and above, a trial fitting is recommended.
drilling pATTerns 45/9.5
Screw fixing Press fitting
9.5
45
35+0.1
45
8 9.5
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
Cup dimensions39
(40.
5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)39 (40.5)
Udaljenost čašice
Visina montažne pločice
Prek
lop vr
ata
uNuTARNJE PREkRIVANJE
All dimensions in millimetres. Subject to changes THE CATALOGUE Grass 8705-2011
1
2
3
4
5
6
7
8
Hinge sysTemsTiomos 110 110° Hinge
insTAllATion informATion All dimensions in millimetres
Full overlay K0 Overlay K3 Half overlay K9.5 Inset1 K19
84.5
3-7
F12
24
13F
84.5
3-7
24
15 10
3-7
84.5
31
2 x F21.5
F3.5 31
86
40.5
F
3-7
Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 21 Set mounting plate back by door
thickness +1.5 mm
Doo
r ov
erla
y
0Cup distance
3 4 5 6 722.0 021.0 020.0 0 219.0 0 2 318.5 3.518.0 0 2 317.5 3.517.0 2 316.5 3.516.0 2 315.5 3.515.0 314.5 3.5
Mounting plate height
Doo
r ov
erla
y
3Cup distance
3 4 5 6 719.0 018.0 017.0 0 216.516.0 0 2 315.5 3.515.0 0 2 314.5 3.514.0 2 313.5 3.513.0 2 312.5 3.512.0 311.5 3.5
Mounting plate height
Doo
r ov
erla
y
9.5Cup distance
3 4 5 6 712.5 011.5 010.5 0 210.09.5 0 2 39.0 3.58.5 0 2 38.0 3.57.5 2 37.0 3.56.5 2 36.0 3.55.5 35.0 3.5
Mounting plate height
Doo
r re
veal
19Cup distance
3 4 5 6 70.0 0 2 30.5 3.51.0 0 2 31.5 3.52.0 2 33.0 2 34.0 3
Mounting plate height
minimum gAp
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 1.0 1.0 1.0 1.22 2.12
22.0 1.0 1.0 1.0 1.0 1.52
21.0 1.0 1.0 1.0 1.0 1.22
20.0 1.0 1.0 1.0 1.0 1.019.0 1.0 1.0 1.0 1.0 1.018.0 1.0 1.0 1.0 1.0 1.017.0 1.0 1.0 1.0 1.0 1.016.0 1.0 1.0 1.0 1.0 1.0
Minimum gap2 1.0 at 85° opening angle
minimum reveAl
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 2.4 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 0.6 0.6 0.6 0.6 0.616.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F)
85° opening Angle
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
36.0 11.1 10.3 9.7 9.1 8.530.0 5.4 4.8 4.4 4.3 4.228.0 3.7 3.6 3.5 3.4 3.326.0 2.9 2.8 2.8 2.7 2.624.0 2.2 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.716.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F) 3 at 85°3 85° opening angle reduction clip
noTes
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
For door thicknesses of 24 mm and above, a trial fitting is recommended.
drilling pATTerns 45/9.5
Screw fixing Press fitting
9.5
45
35+0.1
45
8 9.5
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
Cup dimensions
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
All dimensions in millimetres. Subject to changes THE CATALOGUE Grass 8705-2011
1
2
3
4
5
6
7
8
Hinge sysTemsTiomos 110 110° Hinge
insTAllATion informATion All dimensions in millimetres
Full overlay K0 Overlay K3 Half overlay K9.5 Inset1 K19
84.5
3-7
F12
24
13F
84.5
3-7
24
15 10
3-7
84.5
31
2 x F21.5
F3.5 31
86
40.5
F
3-7
Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 21 Set mounting plate back by door
thickness +1.5 mm
Doo
r ov
erla
y
0Cup distance
3 4 5 6 722.0 021.0 020.0 0 219.0 0 2 318.5 3.518.0 0 2 317.5 3.517.0 2 316.5 3.516.0 2 315.5 3.515.0 314.5 3.5
Mounting plate height
Doo
r ov
erla
y
3Cup distance
3 4 5 6 719.0 018.0 017.0 0 216.516.0 0 2 315.5 3.515.0 0 2 314.5 3.514.0 2 313.5 3.513.0 2 312.5 3.512.0 311.5 3.5
Mounting plate height
Doo
r ov
erla
y
9.5Cup distance
3 4 5 6 712.5 011.5 010.5 0 210.09.5 0 2 39.0 3.58.5 0 2 38.0 3.57.5 2 37.0 3.56.5 2 36.0 3.55.5 35.0 3.5
Mounting plate height
Doo
r re
veal
19Cup distance
3 4 5 6 70.0 0 2 30.5 3.51.0 0 2 31.5 3.52.0 2 33.0 2 34.0 3
Mounting plate height
minimum gAp
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 1.0 1.0 1.0 1.22 2.12
22.0 1.0 1.0 1.0 1.0 1.52
21.0 1.0 1.0 1.0 1.0 1.22
20.0 1.0 1.0 1.0 1.0 1.019.0 1.0 1.0 1.0 1.0 1.018.0 1.0 1.0 1.0 1.0 1.017.0 1.0 1.0 1.0 1.0 1.016.0 1.0 1.0 1.0 1.0 1.0
Minimum gap2 1.0 at 85° opening angle
minimum reveAl
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
24.0 2.4 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.717.0 0.6 0.6 0.6 0.6 0.616.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F)
85° opening Angle
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
36.0 11.1 10.3 9.7 9.1 8.530.0 5.4 4.8 4.4 4.3 4.228.0 3.7 3.6 3.5 3.4 3.326.0 2.9 2.8 2.8 2.7 2.624.0 2.2 2.1 2.1 2.1 2.022.0 1.6 1.6 1.6 1.5 1.521.0 1.4 1.3 1.3 1.3 1.320.0 1.1 1.1 1.1 1.1 1.119.0 0.9 0.9 0.9 0.9 0.918.0 0.7 0.7 0.7 0.7 0.716.0 0.6 0.6 0.6 0.6 0.6
Minimum reveal (F) 3 at 85°3 85° opening angle reduction clip
noTes
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
Minimum reveal for doors with bevelled edges (R = 1 mm) (factory setting).
For door thicknesses of 24 mm and above, a trial fitting is recommended.
drilling pATTerns 45/9.5
Screw fixing Press fitting
9.5
45
35+0.1
45
8 9.5
35+0.1
Combination drilling pattern for Impresso
45
8 9.5
35+0.1
48
8 9
35+0.1
Cup dimensions
39 (4
0.5)
62 (64.5) ( ) Impresso
min
. 12.
6
3 (8
)
39 (40.5)
Udaljenost čašice
Visina montažne pločice
Prek
lop vr
ata
603
PlOčICE ZA TIOMOS SPOJNICEBr. artikla Opis artikla JM
Cijena bez PDV-a
PDVCijena sa PDV-om
1079721 Pločica za Tiomos spojnicu, obična, h=0, križnakom
1,33 25% 1,67
1079701 Pločica za Tiomos spojnicu, regulacijska, h=0, ravna 3,67 25% 4,59
VISINA
0
Grass THE CATALOGUE Packaging units are not covered in this catalogue; please enquire with your supplier146 05-2011
1
2
3
4
5
6
7
8
Tiomos Mounting plates
31
2
order informaTion
ECO CrOss MOUnTinG pLATE, 3-pOinT fixinG
For screw fixing 37/32 Height Item No.
• steel, nickel-plated• fixing with wood screws
Ø 3.5 x 15 mm • Height adjustment (HV) via slot
32
37 26-2 f058139720
0 f058139721
2 f058139722
3 f058139723
3.5 f058139724
ECO CrOss MOUnTinG pLATE, 3-pOinT fixinG
With pre-assembled pan head Euro screws (13.5 mm) 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled pan head
Euro screws • Height adjustment (HV) via slot
Ø 5
32
37 12(Ø 6.3 x 13.5)
26
-2 f058139735
0 f058139736
2 f058139737
3 f058139738
3.5 f058139739
ECO CrOss MOUnTinG pLATE, 3-pOinT fixinG, fOr TWin AppLiCATiOn
With pre-assembled pan head Euro screws (10.5 mm) 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled pan head
Euro screws• Height adjustment (HV) via slot• for twin application
7.5(Ø 6.3 x 10.5)
32
37
Ø 5
26-2 f058139857
0 f058139858
2 f058139859
3 f058139860
3.5 f058139861
1 2 3(HV) Height adjustment +/-2.5 mm
(SV) Side adjustment +/- 2 mm
(TV) Depth adjustment +3/-2 mm
All adjustments can be carried out independently of each other.
Tiomos. .Mounting plates. .
Grass THE CATALOGUE Packaging units are not covered in this catalogue; please enquire with your supplier146 05-2011
1
2
3
4
5
6
7
8
Tiomos Mounting plates
31
2
order informaTion
ECO CrOss MOUnTinG pLATE, 3-pOinT fixinG
For screw fixing 37/32 Height Item No.
• steel, nickel-plated• fixing with wood screws
Ø 3.5 x 15 mm • Height adjustment (HV) via slot
32
37 26-2 f058139720
0 f058139721
2 f058139722
3 f058139723
3.5 f058139724
ECO CrOss MOUnTinG pLATE, 3-pOinT fixinG
With pre-assembled pan head Euro screws (13.5 mm) 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled pan head
Euro screws • Height adjustment (HV) via slot
Ø 5
32
37 12(Ø 6.3 x 13.5)
26
-2 f058139735
0 f058139736
2 f058139737
3 f058139738
3.5 f058139739
ECO CrOss MOUnTinG pLATE, 3-pOinT fixinG, fOr TWin AppLiCATiOn
With pre-assembled pan head Euro screws (10.5 mm) 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled pan head
Euro screws• Height adjustment (HV) via slot• for twin application
7.5(Ø 6.3 x 10.5)
32
37
Ø 5
26-2 f058139857
0 f058139858
2 f058139859
3 f058139860
3.5 f058139861
1 2 3(HV) Height adjustment +/-2.5 mm
(SV) Side adjustment +/- 2 mm
(TV) Depth adjustment +3/-2 mm
All adjustments can be carried out independently of each other.
Tiomos. .Mounting plates. .
All dimensions in millimetres. Subject to changes THE CATALOGUE Grass 14705-2011
1
2
3
4
5
6
7
8
Hinge sysTemsTiomos
mounTing plaTes
31
2
32
1
order informaTion
ECO CrOss MOUnTinG pLATE, 3-pOinT fixinG
For press fitting 37/32 Height Item No.
• steel, nickel-plated• fixing with Ø 10 mm dowels• Height adjustment (HV) via slot• do not use a hammer for inserting the
mounting plateØ 10
32
37 1226-2 f058139725
0 f058139726
2 f058139727
3 f058139728
3.5 f058139729
ECO CrOss MOUnTinG pLATE, 3-pOinT fixinG
With pre-assembled pan head Euro screws (13.5 mm) 28/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled pan head Euro
screws • Height adjustment (HV) via slot
Ø 5
32
12(Ø 6.3 x 13.5)
3528-2 f058139785
0 f058139786
2 f058139787
3 f058139788
3.5 f058139789
1D LinEAr MOUnTinG pLATE, 2-pOinT fixinG
For screw fixing 20/32 Height Item No.
• steel, nickel-plated• fixing with wood screws
Ø 3.5 x 15 mm or with Euro screws Ø 6.3 x 13.5 mm
• With convenient height adjustment (HV) via worm gear
20 32
Ø 3.5 0 f059139701
2 f059139702
3 f059139703
3.5 f059139704
1D LinEAr MOUnTinG pLATE, 2-pOinT fixinG
For Press fitting 20/32 Height Item No.
• steel, nickel-plated• fixing with Ø 10 mm dowels• With convenient height adjustment (HV)
via worm gear• do not use a hammer for inserting the
mounting plate
20 32
1013
0 f059139706
2 f059139707
3 f059139708
3.5 f059139709
Hinge systems.Tiomos.Mounting plates
1 2 3(HV) Height adjustment +/-2.5 mm
(SV) Side adjustment +/- 2 mm
(TV) Depth adjustment +3/-2 mm
All adjustments can be carried out independently of each other.
All dimensions in millimetres. Subject to changes THE CATALOGUE Grass 14705-2011
1
2
3
4
5
6
7
8
Hinge sysTemsTiomos
mounTing plaTes
31
2
32
1
order informaTion
ECO CrOss MOUnTinG pLATE, 3-pOinT fixinG
For press fitting 37/32 Height Item No.
• steel, nickel-plated• fixing with Ø 10 mm dowels• Height adjustment (HV) via slot• do not use a hammer for inserting the
mounting plateØ 10
32
37 1226-2 f058139725
0 f058139726
2 f058139727
3 f058139728
3.5 f058139729
ECO CrOss MOUnTinG pLATE, 3-pOinT fixinG
With pre-assembled pan head Euro screws (13.5 mm) 28/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled pan head Euro
screws • Height adjustment (HV) via slot
Ø 5
32
12(Ø 6.3 x 13.5)
3528-2 f058139785
0 f058139786
2 f058139787
3 f058139788
3.5 f058139789
1D LinEAr MOUnTinG pLATE, 2-pOinT fixinG
For screw fixing 20/32 Height Item No.
• steel, nickel-plated• fixing with wood screws
Ø 3.5 x 15 mm or with Euro screws Ø 6.3 x 13.5 mm
• With convenient height adjustment (HV) via worm gear
20 32
Ø 3.5 0 f059139701
2 f059139702
3 f059139703
3.5 f059139704
1D LinEAr MOUnTinG pLATE, 2-pOinT fixinG
For Press fitting 20/32 Height Item No.
• steel, nickel-plated• fixing with Ø 10 mm dowels• With convenient height adjustment (HV)
via worm gear• do not use a hammer for inserting the
mounting plate
20 32
1013
0 f059139706
2 f059139707
3 f059139708
3.5 f059139709
Hinge systems.Tiomos.Mounting plates
1 2 3(HV) Height adjustment +/-2.5 mm
(SV) Side adjustment +/- 2 mm
(TV) Depth adjustment +3/-2 mm
All adjustments can be carried out independently of each other.
All dimensions in millimetres. Subject to changes THE CATALOGUE Grass 14705-2011
1
2
3
4
5
6
7
8
Hinge sysTemsTiomos
mounTing plaTes
31
2
32
1
order informaTion
ECO CrOss MOUnTinG pLATE, 3-pOinT fixinG
For press fitting 37/32 Height Item No.
• steel, nickel-plated• fixing with Ø 10 mm dowels• Height adjustment (HV) via slot• do not use a hammer for inserting the
mounting plateØ 10
32
37 1226-2 f058139725
0 f058139726
2 f058139727
3 f058139728
3.5 f058139729
ECO CrOss MOUnTinG pLATE, 3-pOinT fixinG
With pre-assembled pan head Euro screws (13.5 mm) 28/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled pan head Euro
screws • Height adjustment (HV) via slot
Ø 5
32
12(Ø 6.3 x 13.5)
3528-2 f058139785
0 f058139786
2 f058139787
3 f058139788
3.5 f058139789
1D LinEAr MOUnTinG pLATE, 2-pOinT fixinG
For screw fixing 20/32 Height Item No.
• steel, nickel-plated• fixing with wood screws
Ø 3.5 x 15 mm or with Euro screws Ø 6.3 x 13.5 mm
• With convenient height adjustment (HV) via worm gear
20 32
Ø 3.5 0 f059139701
2 f059139702
3 f059139703
3.5 f059139704
1D LinEAr MOUnTinG pLATE, 2-pOinT fixinG
For Press fitting 20/32 Height Item No.
• steel, nickel-plated• fixing with Ø 10 mm dowels• With convenient height adjustment (HV)
via worm gear• do not use a hammer for inserting the
mounting plate
20 32
1013
0 f059139706
2 f059139707
3 f059139708
3.5 f059139709
Hinge systems.Tiomos.Mounting plates
1 2 3(HV) Height adjustment +/-2.5 mm
(SV) Side adjustment +/- 2 mm
(TV) Depth adjustment +3/-2 mm
All adjustments can be carried out independently of each other.
VISINA
0
13.5/3213.5/32
1. podešavanje po visini2. podešavanje po širini3. podešavanje po dubini
704
NEXIS ClICk-ON SPOJNICE
• kut otvaranja 100°/110°• mogućnost montaže ublaživača (Soft-close)• 3-D podešavanje uz odgovarajuću pločicu• dubina bušenja čašice (11 mm) prikladna i za vrata na koja se ugrađuje ublaživač (Soft-close)
Br. artikla Opis artikla JMCijena bez
PDV-aPDV
Cijena sa PDV-om
1072632 Spojnica ravna Nexis click-on, 110°,
kom
4,81 25% 6,02
1072810 Spojnica ravna Nexis click-on, 110°, na tiplicu, 7,79 25% 9,73
1072818 Spojnica polukriva Nexis click-on, 110°, 7,17 25% 8,97
1072736 Spojnica kriva Nexis click-on, 100°, 6,59 25% 8,23
Grass The CaTalogue Packaging units are not covered in this catalogue; please enquire with your supplier210 05-2011
1
2
3
4
5
6
7
8
Nexis CliCk-oN 22110° hinge
• 110° opening angle•Soft-close compatible•With shallow cup depth (11 mm) also
suitable for soft-formed doors•3-dimensional adjustment with
appropriate mounting plate
Available in 2 versions:•With self-closing mechanism (spring) •Without self-closing mechanism (spring)
for use with Tipmatic
110°
order iNformAtioN
Door overlay ViewMaterial
Crankingwith
spring
Item No.
Cup ArmClick-on
Screw fixingClick-on
Press fitting
Full overlaySteel,
nickel-platedSteel,
nickel-plated0
■ f015072811 f015072810
– f015072816 –
half overlaySteel,
nickel-platedSteel,
nickel-plated8
■ f015072818 f015072817
– f015072819 –
Cover CAps
Designation Cranking Imprinted/embossed
Item No.
hinge arm cover cap, steel, short, nickel-plated, not imprinted, Soft-close compatible
0 on request f069073570
hinge arm cover cap, steel, open, nickel-plated, not imprinted, Soft-close compatible
8 on request f069073669
ACCessories
Designation Item No.
Tipmatic Plus Click-on set f069073752
Soft-close Click-on set f069073714
Designation Item No.
85° opening angle reduction clip plastic, black
f069135032
hinge cup cover cap, steel, nickel-plated, not imprinted
f069073687
Nexis Click-on mounting plates 254
accessories 262
Soft-close Click-on 322
Tipmatic Plus Click-on 338
Technical information 264
assembly aids 794
Nexis.Click-on 22.110° hinge. .
TEHNIČKE UPUTE ZA MONTAŽU I UGRADNJU
POTPuNO PREkRIVANJE
All dimensions in millimetres. Subject to changes The CaTalogue Grass 21105-2011
1
2
3
4
5
6
7
8
HiNge systemsNexis CliCk-oN 22
110° HiNge
iNstAllAtioN iNformAtioN all dimensions in millimetres
Full overlay K0 half overlay K8
F11
3-7
64
21
11
2.5
3F
29
64
19
2.5
2xF
3-7
Mounting plate height 2 Mounting plate height 2
Doo
r ov
erla
y
0Cup distance
3 4 5 6 720 019 018 0 217 0 2 316 0 2 3 415 2 3 414 2 3 413 3 412 4
Mounting plate height
Doo
r ov
erla
y
8Cup distance
3 4 5 6 712 011 010 0 29 0 2 38 0 2 3 47 2 3 46 2 3 45 3 44 4
Mounting plate height
miNimum gAp
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
16 0.5 0.6 1.6 2.6 3.618 0.5 1.2 2.2 3.2 4.219 0.5 1.5 2.5 3.5 4.520 0.8 1.8 2.8 3.8 4.822 1.4 2.4 3.4 4.4 5.4
Minimum gap
miNimum reveAl
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
16 0.5 0.5 0.5 0.5 0.518 1.0 1.0 1.0 1.0 1.019 1.2 1.2 1.2 1.2 1.220 2.2 1.5 1.5 1.5 1.522 4.7 3.7 2.8 2.1 2.1
Minimum reveal (F)
Notes
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
important: Reveals were calculated for doors with a radius of 1 mm!
hinge dimensions and reveal calculation with factory setting.
We recommend a trial fitting.
drilliNg pAtterNs
Screw fixing Press fitting
Cup dimeNsioNs
Hinge systems.Nexis Click-on 22.110° hinge
All dimensions in millimetres. Subject to changes The CaTalogue Grass 21105-2011
1
2
3
4
5
6
7
8
HiNge systemsNexis CliCk-oN 22
110° HiNge
iNstAllAtioN iNformAtioN all dimensions in millimetres
Full overlay K0 half overlay K8
F11
3-7
64
21
11
2.5
3F
29
64
19
2.5
2xF
3-7
Mounting plate height 2 Mounting plate height 2
Doo
r ov
erla
y
0Cup distance
3 4 5 6 720 019 018 0 217 0 2 316 0 2 3 415 2 3 414 2 3 413 3 412 4
Mounting plate height
Doo
r ov
erla
y
8Cup distance
3 4 5 6 712 011 010 0 29 0 2 38 0 2 3 47 2 3 46 2 3 45 3 44 4
Mounting plate height
miNimum gAp
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
16 0.5 0.6 1.6 2.6 3.618 0.5 1.2 2.2 3.2 4.219 0.5 1.5 2.5 3.5 4.520 0.8 1.8 2.8 3.8 4.822 1.4 2.4 3.4 4.4 5.4
Minimum gap
miNimum reveAl
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
16 0.5 0.5 0.5 0.5 0.518 1.0 1.0 1.0 1.0 1.019 1.2 1.2 1.2 1.2 1.220 2.2 1.5 1.5 1.5 1.522 4.7 3.7 2.8 2.1 2.1
Minimum reveal (F)
Notes
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
important: Reveals were calculated for doors with a radius of 1 mm!
hinge dimensions and reveal calculation with factory setting.
We recommend a trial fitting.
drilliNg pAtterNs
Screw fixing Press fitting
Cup dimeNsioNs
Hinge systems.Nexis Click-on 22.110° hinge
All dimensions in millimetres. Subject to changes The CaTalogue Grass 21105-2011
1
2
3
4
5
6
7
8
HiNge systemsNexis CliCk-oN 22
110° HiNge
iNstAllAtioN iNformAtioN all dimensions in millimetres
Full overlay K0 half overlay K8
F11
3-7
64
21
11
2.5
3F
2964
19
2.5
2xF
3-7
Mounting plate height 2 Mounting plate height 2
Doo
r ov
erla
y
0Cup distance
3 4 5 6 720 019 018 0 217 0 2 316 0 2 3 415 2 3 414 2 3 413 3 412 4
Mounting plate height
Doo
r ov
erla
y
8Cup distance
3 4 5 6 712 011 010 0 29 0 2 38 0 2 3 47 2 3 46 2 3 45 3 44 4
Mounting plate height
miNimum gAp
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
16 0.5 0.6 1.6 2.6 3.618 0.5 1.2 2.2 3.2 4.219 0.5 1.5 2.5 3.5 4.520 0.8 1.8 2.8 3.8 4.822 1.4 2.4 3.4 4.4 5.4
Minimum gap
miNimum reveAl
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
16 0.5 0.5 0.5 0.5 0.518 1.0 1.0 1.0 1.0 1.019 1.2 1.2 1.2 1.2 1.220 2.2 1.5 1.5 1.5 1.522 4.7 3.7 2.8 2.1 2.1
Minimum reveal (F)
Notes
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
important: Reveals were calculated for doors with a radius of 1 mm!
hinge dimensions and reveal calculation with factory setting.
We recommend a trial fitting.
drilliNg pAtterNs
Screw fixing Press fitting
Cup dimeNsioNs
Hinge systems.Nexis Click-on 22.110° hinge
All dimensions in millimetres. Subject to changes The CaTalogue Grass 20905-2011
1
2
3
4
5
6
7
8
HiNge systemsNexis CliCk-oN 04
100° HiNge
iNstAllAtioN iNformAtioN all dimensions in millimetres
Full overlay K-2/0 half overlay K8 Inset K15
F11
3-6
64
21
13
3-6
3F2xF
21
29
64 65
38
30
3-6
F6
Mounting plate height 2 Mounting plate height 2 Mounting plate height 4
Doo
r ov
erla
y
-2Cup distance
03 4 5 6
21 0 1920 0 1819 0 2 1718 0 2 3 1617 2 3 4 1516 2 3 4 1415 3 4 1314 4 12
Mounting plate height
Doo
r ov
erla
y
8Cup distance
3 4 5 611 010 09 0 28 0 2 37 2 3 46 2 3 45 3 4
Mounting plate height
Doo
r re
veal
15Cup distance
3 4 5 60 2 3 41 2 3 42 3 4
Mounting plate height
miNimum gAp
Doo
r th
ickn
ess
Cup distance3 4 5 6
16 0.5 0.5 0.5 0.518 0.5 0.5 0.5 0.519 0.5 0.5 0.5 0.520 0.0 0.0 0.0 0.522 0.5 0.5 0.5 0.824 0.5 0.5 0.5 1.1
Minimum gap
miNimum reveAl
Doo
r th
ickn
ess
Cup distance3 4 5 6
16 0.6 0.6 0.6 0.618 0.9 0.9 0.9 0.919 1.1 1.1 1.1 1.120 1.4 1.4 1.4 1.422 1.9 1.9 1.9 1.924 2.5 2.5 2.5 2.5
Minimum reveal (F)
Notes
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
important: Reveals were calculated for doors with a radius of 1 mm!
hinge dimensions and reveal calculation with factory setting.
We recommend a trial fitting.
drilliNg pAtterNs
Screw fixing Press fitting
Cup dimeNsioNs
Hinge systems.Nexis Click-on 04.100° hinge
All dimensions in millimetres. Subject to changes The CaTalogue Grass 20905-2011
1
2
3
4
5
6
7
8
HiNge systemsNexis CliCk-oN 04
100° HiNge
iNstAllAtioN iNformAtioN all dimensions in millimetres
Full overlay K-2/0 half overlay K8 Inset K15
F11
3-6
64
21
13
3-6
3F2xF
21
29
64 65
38
30
3-6
F6
Mounting plate height 2 Mounting plate height 2 Mounting plate height 4
Doo
r ov
erla
y
-2Cup distance
03 4 5 6
21 0 1920 0 1819 0 2 1718 0 2 3 1617 2 3 4 1516 2 3 4 1415 3 4 1314 4 12
Mounting plate height
Doo
r ov
erla
y
8Cup distance
3 4 5 611 010 09 0 28 0 2 37 2 3 46 2 3 45 3 4
Mounting plate height
Doo
r re
veal
15Cup distance
3 4 5 60 2 3 41 2 3 42 3 4
Mounting plate height
miNimum gAp
Doo
r th
ickn
ess
Cup distance3 4 5 6
16 0.5 0.5 0.5 0.518 0.5 0.5 0.5 0.519 0.5 0.5 0.5 0.520 0.0 0.0 0.0 0.522 0.5 0.5 0.5 0.824 0.5 0.5 0.5 1.1
Minimum gap
miNimum reveAl
Doo
r th
ickn
ess
Cup distance3 4 5 6
16 0.6 0.6 0.6 0.618 0.9 0.9 0.9 0.919 1.1 1.1 1.1 1.120 1.4 1.4 1.4 1.422 1.9 1.9 1.9 1.924 2.5 2.5 2.5 2.5
Minimum reveal (F)
Notes
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
important: Reveals were calculated for doors with a radius of 1 mm!
hinge dimensions and reveal calculation with factory setting.
We recommend a trial fitting.
drilliNg pAtterNs
Screw fixing Press fitting
Cup dimeNsioNs
Hinge systems.Nexis Click-on 04.100° hinge
Udaljenost čašice
Udaljenost čašice
Visina montažne pločice
Prek
lop vr
ata
Visina montažne pločice
Prek
lop vr
ata
Visina montažne pločice
Prek
lop vr
ata
All dimensions in millimetres. Subject to changes The CaTalogue Grass 21105-2011
1
2
3
4
5
6
7
8
HiNge systemsNexis CliCk-oN 22
110° HiNge
iNstAllAtioN iNformAtioN all dimensions in millimetres
Full overlay K0 half overlay K8
F11
3-7
64
21
11
2.5
3F
29
64
19
2.5
2xF
3-7
Mounting plate height 2 Mounting plate height 2
Doo
r ov
erla
y
0Cup distance
3 4 5 6 720 019 018 0 217 0 2 316 0 2 3 415 2 3 414 2 3 413 3 412 4
Mounting plate height
Doo
r ov
erla
y
8Cup distance
3 4 5 6 712 011 010 0 29 0 2 38 0 2 3 47 2 3 46 2 3 45 3 44 4
Mounting plate height
miNimum gAp
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
16 0.5 0.6 1.6 2.6 3.618 0.5 1.2 2.2 3.2 4.219 0.5 1.5 2.5 3.5 4.520 0.8 1.8 2.8 3.8 4.822 1.4 2.4 3.4 4.4 5.4
Minimum gap
miNimum reveAl
Doo
r th
ickn
ess
Cup distance3 4 5 6 7
16 0.5 0.5 0.5 0.5 0.518 1.0 1.0 1.0 1.0 1.019 1.2 1.2 1.2 1.2 1.220 2.2 1.5 1.5 1.5 1.522 4.7 3.7 2.8 2.1 2.1
Minimum reveal (F)
Notes
The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance.
important: Reveals were calculated for doors with a radius of 1 mm!
hinge dimensions and reveal calculation with factory setting.
We recommend a trial fitting.
drilliNg pAtterNs
Screw fixing Press fitting
Cup dimeNsioNs
Hinge systems.Nexis Click-on 22.110° hinge
Udaljenost čašice
uNuTARNJE PREkRIVANJE DJElOMIčNO PREkRIVANJE
05
PlOčICE ZA NEXIS SPOJNICEHAlf OVERlAy k8 INSET k15Br. artikla Opis artikla JM
Cijena bez PDV-a
PDVCijena sa PDV-om
1073129 Pločica za Nexis click-on spojnicu, regulacijska, h=0, ravna
kom
3,70 25% 4,62
1073144 Pločica za Nexis click-on spojnicu, obična, križna 1,20 25% 1,50
1073148 Pločica za Nexis click-on spojnicu, regulacijska, h=0, križna 2,82 25% 3,53
1073151 Pločica za Nexis click-on spojnicu, regulacijska, h=4, križna 4,05 25% 5,06
1073179 Pločica za Nexis click-on spojnicu, h=0, sa euro vijkom, križna 2,36 25% 2,95
ugRADNJA VIJCIMA ZA DRVO VISINA PODEŠAVANJE
0
Grass The CaTalogue Packaging units are not covered in this catalogue; please enquire with your supplier260 05-2011
1
2
3
4
5
6
7
8
Nexis CliCk-oN Mounting plates
1 3
2
1 32
order iNformatioN
Cross MounTing plaTe for 20° angle, 2-poinT fixing
With pre-assembled Euro screws X/32 Height Item No.
• for 20° opening angle• Zamak, nickel-plated• fixing with pre-assembled
euro screws• hole spacing 32 mm• height adjustment
Ø 6
.3 x
13.
5 2 f061073273
4 f061073274
Cross MounTing plaTe for 45° angle, 2-poinT fixing
For Euro screws X/32 Height Item No.
• for 45° opening angle• Zamak, nickel-plated• fixing with euro screws• hole spacing 32 mm• height adjustment
Ø 6
.3 x
13
2 f061073271
4 f061073272
1D linear MounTing plaTe, 2-poinT fixing
For screw fixing 13.5/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with wood screws• height adjustment via a cam
13.5 32
Ø3.5 0 f060073129
2 f060073130
3 f060073212
4 f060073205
1D linear MounTing plaTe, 2-poinT fixing
For press fitting 13.5/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with 10 mm dowels• height adjustment via a cam
13.5 32
1012
0 f060073136
2 f060073137
3 f060073210
4 f060073138
Nexis Click-on. .Mounting plates. .
1 2 3Height
adjustment+/-2 mm
Side adjustment+1/-3 mm
Depth adjustment+3/-1 mm
All adjustments can be carried out independently of each other.
Grass The CaTalogue Packaging units are not covered in this catalogue; please enquire with your supplier260 05-2011
1
2
3
4
5
6
7
8
Nexis CliCk-oN Mounting plates
1 3
2
1 32
order iNformatioN
Cross MounTing plaTe for 20° angle, 2-poinT fixing
With pre-assembled Euro screws X/32 Height Item No.
• for 20° opening angle• Zamak, nickel-plated• fixing with pre-assembled
euro screws• hole spacing 32 mm• height adjustment
Ø 6
.3 x
13.
5 2 f061073273
4 f061073274
Cross MounTing plaTe for 45° angle, 2-poinT fixing
For Euro screws X/32 Height Item No.
• for 45° opening angle• Zamak, nickel-plated• fixing with euro screws• hole spacing 32 mm• height adjustment
Ø 6
.3 x
13
2 f061073271
4 f061073272
1D linear MounTing plaTe, 2-poinT fixing
For screw fixing 13.5/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with wood screws• height adjustment via a cam
13.5 32
Ø3.5 0 f060073129
2 f060073130
3 f060073212
4 f060073205
1D linear MounTing plaTe, 2-poinT fixing
For press fitting 13.5/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with 10 mm dowels• height adjustment via a cam
13.5 32
1012
0 f060073136
2 f060073137
3 f060073210
4 f060073138
Nexis Click-on. .Mounting plates. .
1 2 3Height
adjustment+/-2 mm
Side adjustment+1/-3 mm
Depth adjustment+3/-1 mm
All adjustments can be carried out independently of each other.
Grass The CaTalogue Packaging units are not covered in this catalogue; please enquire with your supplier260 05-2011
1
2
3
4
5
6
7
8
Nexis CliCk-oN Mounting plates
1 3
2
1 32
order iNformatioN
Cross MounTing plaTe for 20° angle, 2-poinT fixing
With pre-assembled Euro screws X/32 Height Item No.
• for 20° opening angle• Zamak, nickel-plated• fixing with pre-assembled
euro screws• hole spacing 32 mm• height adjustment
Ø 6
.3 x
13.
5 2 f061073273
4 f061073274
Cross MounTing plaTe for 45° angle, 2-poinT fixing
For Euro screws X/32 Height Item No.
• for 45° opening angle• Zamak, nickel-plated• fixing with euro screws• hole spacing 32 mm• height adjustment
Ø 6
.3 x
13
2 f061073271
4 f061073272
1D linear MounTing plaTe, 2-poinT fixing
For screw fixing 13.5/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with wood screws• height adjustment via a cam
13.5 32
Ø3.5 0 f060073129
2 f060073130
3 f060073212
4 f060073205
1D linear MounTing plaTe, 2-poinT fixing
For press fitting 13.5/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with 10 mm dowels• height adjustment via a cam
13.5 32
1012
0 f060073136
2 f060073137
3 f060073210
4 f060073138
Nexis Click-on. .Mounting plates. .
1 2 3Height
adjustment+/-2 mm
Side adjustment+1/-3 mm
Depth adjustment+3/-1 mm
All adjustments can be carried out independently of each other.
Grass The CaTalogue Packaging units are not covered in this catalogue; please enquire with your supplier260 05-2011
1
2
3
4
5
6
7
8
Nexis CliCk-oN Mounting plates
1 3
2
1 32
order iNformatioN
Cross MounTing plaTe for 20° angle, 2-poinT fixing
With pre-assembled Euro screws X/32 Height Item No.
• for 20° opening angle• Zamak, nickel-plated• fixing with pre-assembled
euro screws• hole spacing 32 mm• height adjustment
Ø 6
.3 x
13.
5 2 f061073273
4 f061073274
Cross MounTing plaTe for 45° angle, 2-poinT fixing
For Euro screws X/32 Height Item No.
• for 45° opening angle• Zamak, nickel-plated• fixing with euro screws• hole spacing 32 mm• height adjustment
Ø 6
.3 x
13
2 f061073271
4 f061073272
1D linear MounTing plaTe, 2-poinT fixing
For screw fixing 13.5/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with wood screws• height adjustment via a cam
13.5 32
Ø3.5 0 f060073129
2 f060073130
3 f060073212
4 f060073205
1D linear MounTing plaTe, 2-poinT fixing
For press fitting 13.5/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with 10 mm dowels• height adjustment via a cam
13.5 32
1012
0 f060073136
2 f060073137
3 f060073210
4 f060073138
Nexis Click-on. .Mounting plates. .
1 2 3Height
adjustment+/-2 mm
Side adjustment+1/-3 mm
Depth adjustment+3/-1 mm
All adjustments can be carried out independently of each other.
1. podešavanje po visini2. podešavanje po širini3. podešavanje po dubini
ugRADNJA VIJCIMA ZA DRVO VISINA
0
ugRADNJA VIJCIMA ZA DRVO VISINA
0
4
ugRADNJA EuRO VIJCIMA ZA DRVO VISINA
0
All dimensions in millimetres. Subject to changes The CaTalogue Grass 25705-2011
1
2
3
4
5
6
7
8
HiNge systems Nexis CliCk-oN
mouNtiNg plates
1 3
2
order iNformatioN
1-parT Cross MounTing plaTe, 2-poinT fixing
For screw fixingIllustration 37/32 Height Item No.
• steel, nickel-plated• fixing with wood screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot
Ø 3.5
0 f060073144
2 f060073145
3 f060073209
4 f060073146
1-parT Cross MounTing plaTe, 2-poinT fixing
With pre-assembled Euro screws 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled 13.5 mm long
euro screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot
Ø 6.3 x 13.5
0 f060073179
2 f060073180
3 f060073211
4 f060073181
1-parT Cross MounTing plaTe, 2-poinT fixing for Twin appliCaTion
With pre-assembled Euro screws 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled 10.5 mm long
euro screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot• for twin application Ø 6.3 x 10.5
0 f060073201
2 f060073202
4 f060073203
Hinge systems.Nexis Click-on.Mounting plates
1 2 3Height adjust-
ment+/-2 mm
Side adjustment+1/-3 mm
Depth adjust-ment
+3/-1 mm
All adjustments can be carried out independently of each other.
All dimensions in millimetres. Subject to changes The CaTalogue Grass 25705-2011
1
2
3
4
5
6
7
8
HiNge systems Nexis CliCk-oN
mouNtiNg plates
1 3
2
order iNformatioN
1-parT Cross MounTing plaTe, 2-poinT fixing
For screw fixingIllustration 37/32 Height Item No.
• steel, nickel-plated• fixing with wood screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot
Ø 3.5
0 f060073144
2 f060073145
3 f060073209
4 f060073146
1-parT Cross MounTing plaTe, 2-poinT fixing
With pre-assembled Euro screws 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled 13.5 mm long
euro screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot
Ø 6.3 x 13.5
0 f060073179
2 f060073180
3 f060073211
4 f060073181
1-parT Cross MounTing plaTe, 2-poinT fixing for Twin appliCaTion
With pre-assembled Euro screws 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled 10.5 mm long
euro screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot• for twin application Ø 6.3 x 10.5
0 f060073201
2 f060073202
4 f060073203
Hinge systems.Nexis Click-on.Mounting plates
1 2 3Height adjust-
ment+/-2 mm
Side adjustment+1/-3 mm
Depth adjust-ment
+3/-1 mm
All adjustments can be carried out independently of each other.
All dimensions in millimetres. Subject to changes The CaTalogue Grass 25705-2011
1
2
3
4
5
6
7
8
HiNge systems Nexis CliCk-oN
mouNtiNg plates
1 3
2
order iNformatioN
1-parT Cross MounTing plaTe, 2-poinT fixing
For screw fixingIllustration 37/32 Height Item No.
• steel, nickel-plated• fixing with wood screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot
Ø 3.5
0 f060073144
2 f060073145
3 f060073209
4 f060073146
1-parT Cross MounTing plaTe, 2-poinT fixing
With pre-assembled Euro screws 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled 13.5 mm long
euro screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot
Ø 6.3 x 13.5
0 f060073179
2 f060073180
3 f060073211
4 f060073181
1-parT Cross MounTing plaTe, 2-poinT fixing for Twin appliCaTion
With pre-assembled Euro screws 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled 10.5 mm long
euro screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot• for twin application Ø 6.3 x 10.5
0 f060073201
2 f060073202
4 f060073203
Hinge systems.Nexis Click-on.Mounting plates
1 2 3Height adjust-
ment+/-2 mm
Side adjustment+1/-3 mm
Depth adjust-ment
+3/-1 mm
All adjustments can be carried out independently of each other.
All dimensions in millimetres. Subject to changes The CaTalogue Grass 25705-2011
1
2
3
4
5
6
7
8
HiNge systems Nexis CliCk-oN
mouNtiNg plates
1 3
2
order iNformatioN
1-parT Cross MounTing plaTe, 2-poinT fixing
For screw fixingIllustration 37/32 Height Item No.
• steel, nickel-plated• fixing with wood screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot
Ø 3.5
0 f060073144
2 f060073145
3 f060073209
4 f060073146
1-parT Cross MounTing plaTe, 2-poinT fixing
With pre-assembled Euro screws 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled 13.5 mm long
euro screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot
Ø 6.3 x 13.5
0 f060073179
2 f060073180
3 f060073211
4 f060073181
1-parT Cross MounTing plaTe, 2-poinT fixing for Twin appliCaTion
With pre-assembled Euro screws 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled 10.5 mm long
euro screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot• for twin application Ø 6.3 x 10.5
0 f060073201
2 f060073202
4 f060073203
Hinge systems.Nexis Click-on.Mounting plates
1 2 3Height adjust-
ment+/-2 mm
Side adjustment+1/-3 mm
Depth adjust-ment
+3/-1 mm
All adjustments can be carried out independently of each other.
Grass The CaTalogue Packaging units are not covered in this catalogue; please enquire with your supplier256 05-2011
1
2
3
4
5
6
7
8
Nexis CliCk-oN Mounting plates
1 3
2
order iNformatioN
2-parT Cross MounTing plaTe, 3-poinT fixing
For screw fixing 37/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with wood screws• fixing distance 37 mm• hole spacing 32 mm
0 f060073148
2 f060073150
4 f060073151
8 f060073152
18 f060073153
2-parT Cross MounTing plaTe, 3-poinT fixing
For Euro screws 37/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with euro screws• fixing distance 37 mm• hole spacing 32 mm
Ø 6.3 x 13
Ø 3.5
0 f060073156
2 f060073157
4 f060073158
8 f060073159
18 f060073160
spaCer plaTe, heighT 3
For Euro screws 37/32 Height Item No.
• plastic, black• Can be stacked• for 2-part steel/Zamak plates
Ø 6.3 x 16
3 f069073764
2-parT Cross MounTing plaTe, 3-poinT fixing
With pre-assembled Euro screws 37/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with pre-assembled
euro screws• fixing distance 37 mm• hole spacing 32 mm
Ø 6.3 x 13
Ø 3.5
0 f060073171
2 f060073172
4 f060073173
8 f060073174
18 f060073175
Nexis Click-on. .Mounting plates. .
1 2 3Height
adjustment+/-2 mm
Side adjustment+1/-3 mm
Depth adjustment+3/-1 mm
All adjustments can be carried out independently of each other.
Grass The CaTalogue Packaging units are not covered in this catalogue; please enquire with your supplier256 05-2011
1
2
3
4
5
6
7
8
Nexis CliCk-oN Mounting plates
1 3
2
order iNformatioN
2-parT Cross MounTing plaTe, 3-poinT fixing
For screw fixing 37/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with wood screws• fixing distance 37 mm• hole spacing 32 mm
0 f060073148
2 f060073150
4 f060073151
8 f060073152
18 f060073153
2-parT Cross MounTing plaTe, 3-poinT fixing
For Euro screws 37/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with euro screws• fixing distance 37 mm• hole spacing 32 mm
Ø 6.3 x 13
Ø 3.5
0 f060073156
2 f060073157
4 f060073158
8 f060073159
18 f060073160
spaCer plaTe, heighT 3
For Euro screws 37/32 Height Item No.
• plastic, black• Can be stacked• for 2-part steel/Zamak plates
Ø 6.3 x 16
3 f069073764
2-parT Cross MounTing plaTe, 3-poinT fixing
With pre-assembled Euro screws 37/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with pre-assembled
euro screws• fixing distance 37 mm• hole spacing 32 mm
Ø 6.3 x 13
Ø 3.5
0 f060073171
2 f060073172
4 f060073173
8 f060073174
18 f060073175
Nexis Click-on. .Mounting plates. .
1 2 3Height
adjustment+/-2 mm
Side adjustment+1/-3 mm
Depth adjustment+3/-1 mm
All adjustments can be carried out independently of each other.
Grass The CaTalogue Packaging units are not covered in this catalogue; please enquire with your supplier256 05-2011
1
2
3
4
5
6
7
8
Nexis CliCk-oN Mounting plates
1 3
2
order iNformatioN
2-parT Cross MounTing plaTe, 3-poinT fixing
For screw fixing 37/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with wood screws• fixing distance 37 mm• hole spacing 32 mm
0 f060073148
2 f060073150
4 f060073151
8 f060073152
18 f060073153
2-parT Cross MounTing plaTe, 3-poinT fixing
For Euro screws 37/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with euro screws• fixing distance 37 mm• hole spacing 32 mm
Ø 6.3 x 13
Ø 3.5
0 f060073156
2 f060073157
4 f060073158
8 f060073159
18 f060073160
spaCer plaTe, heighT 3
For Euro screws 37/32 Height Item No.
• plastic, black• Can be stacked• for 2-part steel/Zamak plates
Ø 6.3 x 16
3 f069073764
2-parT Cross MounTing plaTe, 3-poinT fixing
With pre-assembled Euro screws 37/32 Height Item No.
• steel/Zamak, nickel-plated• fixing with pre-assembled
euro screws• fixing distance 37 mm• hole spacing 32 mm
Ø 6.3 x 13
Ø 3.5
0 f060073171
2 f060073172
4 f060073173
8 f060073174
18 f060073175
Nexis Click-on. .Mounting plates. .
1 2 3Height
adjustment+/-2 mm
Side adjustment+1/-3 mm
Depth adjustment+3/-1 mm
All adjustments can be carried out independently of each other.
All dimensions in millimetres. Subject to changes The CaTalogue Grass 25705-2011
1
2
3
4
5
6
7
8
HiNge systems Nexis CliCk-oN
mouNtiNg plates
1 3
2
order iNformatioN
1-parT Cross MounTing plaTe, 2-poinT fixing
For screw fixingIllustration 37/32 Height Item No.
• steel, nickel-plated• fixing with wood screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot
Ø 3.5
0 f060073144
2 f060073145
3 f060073209
4 f060073146
1-parT Cross MounTing plaTe, 2-poinT fixing
With pre-assembled Euro screws 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled 13.5 mm long
euro screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot
Ø 6.3 x 13.5
0 f060073179
2 f060073180
3 f060073211
4 f060073181
1-parT Cross MounTing plaTe, 2-poinT fixing for Twin appliCaTion
With pre-assembled Euro screws 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled 10.5 mm long
euro screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot• for twin application Ø 6.3 x 10.5
0 f060073201
2 f060073202
4 f060073203
Hinge systems.Nexis Click-on.Mounting plates
1 2 3Height adjust-
ment+/-2 mm
Side adjustment+1/-3 mm
Depth adjust-ment
+3/-1 mm
All adjustments can be carried out independently of each other.
All dimensions in millimetres. Subject to changes The CaTalogue Grass 25705-2011
1
2
3
4
5
6
7
8
HiNge systems Nexis CliCk-oN
mouNtiNg plates
1 3
2
order iNformatioN
1-parT Cross MounTing plaTe, 2-poinT fixing
For screw fixingIllustration 37/32 Height Item No.
• steel, nickel-plated• fixing with wood screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot
Ø 3.5
0 f060073144
2 f060073145
3 f060073209
4 f060073146
1-parT Cross MounTing plaTe, 2-poinT fixing
With pre-assembled Euro screws 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled 13.5 mm long
euro screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot
Ø 6.3 x 13.5
0 f060073179
2 f060073180
3 f060073211
4 f060073181
1-parT Cross MounTing plaTe, 2-poinT fixing for Twin appliCaTion
With pre-assembled Euro screws 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled 10.5 mm long
euro screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot• for twin application Ø 6.3 x 10.5
0 f060073201
2 f060073202
4 f060073203
Hinge systems.Nexis Click-on.Mounting plates
1 2 3Height adjust-
ment+/-2 mm
Side adjustment+1/-3 mm
Depth adjust-ment
+3/-1 mm
All adjustments can be carried out independently of each other.
All dimensions in millimetres. Subject to changes The CaTalogue Grass 25705-2011
1
2
3
4
5
6
7
8
HiNge systems Nexis CliCk-oN
mouNtiNg plates
1 3
2
order iNformatioN
1-parT Cross MounTing plaTe, 2-poinT fixing
For screw fixingIllustration 37/32 Height Item No.
• steel, nickel-plated• fixing with wood screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot
Ø 3.5
0 f060073144
2 f060073145
3 f060073209
4 f060073146
1-parT Cross MounTing plaTe, 2-poinT fixing
With pre-assembled Euro screws 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled 13.5 mm long
euro screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot
Ø 6.3 x 13.5
0 f060073179
2 f060073180
3 f060073211
4 f060073181
1-parT Cross MounTing plaTe, 2-poinT fixing for Twin appliCaTion
With pre-assembled Euro screws 37/32 Height Item No.
• steel, nickel-plated• fixing with pre-assembled 10.5 mm long
euro screws• fixing distance 37 mm• hole spacing 32 mm• height adjustment via slot• for twin application Ø 6.3 x 10.5
0 f060073201
2 f060073202
4 f060073203
Hinge systems.Nexis Click-on.Mounting plates
1 2 3Height adjust-
ment+/-2 mm
Side adjustment+1/-3 mm
Depth adjust-ment
+3/-1 mm
All adjustments can be carried out independently of each other.
13,5/32
13,5/32
13,5/32
13,5/32
906
uBlAŽIVAč ZA NEXIS SPOJNICE
• brza montaža bez alata• nije potrebno dodatno bušenje elemenata ili vrata• precizno podešavanje prema različitim stupnjevima
Br. artikla Opis artikla JMCijena bez
PDV-aPDV
Cijena sa PDV-om
1073715 Ublaživač za Nexis spojnice, univerzalan, sa regulacijom kom 10,51 25% 13,14
Hinge systems.Soft-close.Click-on.For Nexis Click-on and Slide-on 95°, 100°, 110° and 125° hinges.
All dimensions in millimetres. Subject to changes THE CATALOGUE Grass 32305-2011
1
2
3
4
5
6
7
8
HInge SyStemSSoft-cloSe clIck-on
for nexIS clIck-on and SlIde-on 95°, 100°, 110° and 125° HIngeS
InStallatIon InformatIon All dimensions in millimetres
Dimensions Position for Soft-close Click-on
4–5 kg
6–9 kg
10–15 kg
16–22 kg
600 mm
≤ 90
0 m
m≤ 16
00 m
m
≤ 22
00 m
m
≤ 25
00 m
m
1SA 1 2 2
Recommended position for Soft-close Click-on Position for additional Soft-close Click-on (if required)
Installation Soft-close Click-on - quick and easy to fit
1 2 3
4 5 6
1 Hinges with 0 cranking: remove hinge arm cover cap (if fitted). 2 Insert Soft-close Click-on adapter, engaging the two small
hooks at a slight angle in the recesses underneath the hinge cup.
3 Press down both sides of the adapter simultaneously, until it engages with an audible click.
4 If required, fit short hinge arm cover cap (supplied with the set).
5 If required, the adjustment screw can be used to finely adjust the Soft-close Click-on to different opening angles and cranking.
6 The cover cap (supplied with the set) for hinges without Soft-close Click-on or Slide-on is used to ensure a uniform appearance.
noteS
When fitting Grass furniture hardware, the installation instructions supplied with the applicable sales literature must be observed in detail, otherwise the company cannot accept liability.
If you require further information relating to installation and assembly, please contact one of our factories directly.
We thank you for your understanding.
legend
SA Number of hinges
Hinge systems.Soft-close.Click-on.For Nexis Click-on and Slide-on 95°, 100°, 110° and 125° hinges.
All dimensions in millimetres. Subject to changes THE CATALOGUE Grass 32305-2011
1
2
3
4
5
6
7
8
HInge SyStemSSoft-cloSe clIck-on
for nexIS clIck-on and SlIde-on 95°, 100°, 110° and 125° HIngeS
InStallatIon InformatIon All dimensions in millimetres
Dimensions Position for Soft-close Click-on
4–5 kg
6–9 kg
10–15 kg
16–22 kg
600 mm
≤ 90
0 m
m≤ 16
00 m
m
≤ 22
00 m
m
≤ 25
00 m
m
1SA 1 2 2
Recommended position for Soft-close Click-on Position for additional Soft-close Click-on (if required)
Installation Soft-close Click-on - quick and easy to fit
1 2 3
4 5 6
1 Hinges with 0 cranking: remove hinge arm cover cap (if fitted). 2 Insert Soft-close Click-on adapter, engaging the two small
hooks at a slight angle in the recesses underneath the hinge cup.
3 Press down both sides of the adapter simultaneously, until it engages with an audible click.
4 If required, fit short hinge arm cover cap (supplied with the set).
5 If required, the adjustment screw can be used to finely adjust the Soft-close Click-on to different opening angles and cranking.
6 The cover cap (supplied with the set) for hinges without Soft-close Click-on or Slide-on is used to ensure a uniform appearance.
noteS
When fitting Grass furniture hardware, the installation instructions supplied with the applicable sales literature must be observed in detail, otherwise the company cannot accept liability.
If you require further information relating to installation and assembly, please contact one of our factories directly.
We thank you for your understanding.
legend
SA Number of hinges
Hinge systems.Soft-close.Click-on.For Nexis Click-on and Slide-on 95°, 100°, 110° and 125° hinges.
All dimensions in millimetres. Subject to changes THE CATALOGUE Grass 32305-2011
1
2
3
4
5
6
7
8
HInge SyStemSSoft-cloSe clIck-on
for nexIS clIck-on and SlIde-on 95°, 100°, 110° and 125° HIngeS
InStallatIon InformatIon All dimensions in millimetres
Dimensions Position for Soft-close Click-on
4–5 kg
6–9 kg
10–15 kg
16–22 kg
600 mm
≤ 90
0 m
m≤ 16
00 m
m
≤ 22
00 m
m
≤ 25
00 m
m
1SA 1 2 2
Recommended position for Soft-close Click-on Position for additional Soft-close Click-on (if required)
Installation Soft-close Click-on - quick and easy to fit
1 2 3
4 5 6
1 Hinges with 0 cranking: remove hinge arm cover cap (if fitted). 2 Insert Soft-close Click-on adapter, engaging the two small
hooks at a slight angle in the recesses underneath the hinge cup.
3 Press down both sides of the adapter simultaneously, until it engages with an audible click.
4 If required, fit short hinge arm cover cap (supplied with the set).
5 If required, the adjustment screw can be used to finely adjust the Soft-close Click-on to different opening angles and cranking.
6 The cover cap (supplied with the set) for hinges without Soft-close Click-on or Slide-on is used to ensure a uniform appearance.
noteS
When fitting Grass furniture hardware, the installation instructions supplied with the applicable sales literature must be observed in detail, otherwise the company cannot accept liability.
If you require further information relating to installation and assembly, please contact one of our factories directly.
We thank you for your understanding.
legend
SA Number of hinges
TEHNIČKE UPUTE ZA MONTAŽU I UGRADNJU
PRIkAZ MONTAŽE uBlAŽIVAčA
Hinge systems.170° Soft-close..For Nexis wide-angle hinges 170°.
All dimensions in millimetres. Subject to changes THE CATALOGUE Grass 32505-2011
1
2
3
4
5
6
7
8
HInge SyStemS170° Soft-cloSe
for nexIS wIde-angle HIngeS 170°
InStallatIon InformatIon All dimensions in millimetres
Dimensions Position for 170° Soft-close
MH
4–5 kg
6–9 kg
10–15 kg
16–22 kg
600 mm
≤ 90
0 m
m≤ 16
00 m
m
≤ 22
00 m
m
≤ 2
500
mm
11SA 2 2
Drawing with mounting plate height 2 Recommended position for Soft-close 170° Position for additional Soft-close 170° (if required)
Installation 170° Soft-close - quick and easy to fit
1 2 1 Insert 170° Soft-close adapter, engaging the two small hooks at a slight angle in the recesses underneath the hinge arm.
2 Press down adapter until it engages with an audible click.
noteS
When fitting Grass furniture hardware, the installation instructions supplied with the applicable sales literature must be observed in detail, otherwise the company cannot accept liability.
If you require further information relating to installation and assembly, please contact one of our factories directly.
We thank you for your understanding.
legend
MH Mounting plate heightSA Number of hinges
Položaj za ublaživač
Položaj za dodatne ublaživače (ako je potrebno)
10
Vodilice Dynamoov i obične
1108
DyNAMOOV VODIlICE
• Vodilica s potpunom izvlakom i sinkronizacijom, nosivost 30 kg• Sustav za zatvaranje s ublaživačem (Soft close)• Jednostavna montaža vodilice• Integrirano podešavanje visine bez alata +3,5 mm
Grass The caTalogue Packaging units are not covered in this catalogue; please enquire with your supplier652 05-2011
1
2
3
4
5
6
7
8
Dynamoov Full extension drawer Soft-close 30 kg
•Full extension drawer synchronised, 30 kg load capacity
•Soft-close damping system•Stepless self-locking of the drawer when
placed on the slide•Integrated height adjustment
without tools +3.5 mm
orDer information
1 Dynamoov Soft-close full extension drawer, 30 kg
NL Item No.270 f130101101300 f130101102350 f130101104400 f130101106450 f130101108500 f130101110550 f130101112
2 Locking device set, left/right
Item No.f134101126
1
2
4-sided drawer
1
2
3-sided drawer
1
2
Inset drawer
Ino(x)sys 662
Installation technology 757
Dynamoov assembly aids 806
Technical information 664
Grass The caTalogue Packaging units are not covered in this catalogue; please enquire with your supplier652 05-2011
1
2
3
4
5
6
7
8
Dynamoov Full extension drawer Soft-close 30 kg
•Full extension drawer synchronised, 30 kg load capacity
•Soft-close damping system•Stepless self-locking of the drawer when
placed on the slide•Integrated height adjustment
without tools +3.5 mm
orDer information
1 Dynamoov Soft-close full extension drawer, 30 kg
NL Item No.270 f130101101300 f130101102350 f130101104400 f130101106450 f130101108500 f130101110550 f130101112
2 Locking device set, left/right
Item No.f134101126
1
2
4-sided drawer
1
2
3-sided drawer
1
2
Inset drawer
Ino(x)sys 662
Installation technology 757
Dynamoov assembly aids 806
Technical information 664
Grass The caTalogue Packaging units are not covered in this catalogue; please enquire with your supplier652 05-2011
1
2
3
4
5
6
7
8
Dynamoov Full extension drawer Soft-close 30 kg
•Full extension drawer synchronised, 30 kg load capacity
•Soft-close damping system•Stepless self-locking of the drawer when
placed on the slide•Integrated height adjustment
without tools +3.5 mm
orDer information
1 Dynamoov Soft-close full extension drawer, 30 kg
NL Item No.270 f130101101300 f130101102350 f130101104400 f130101106450 f130101108500 f130101110550 f130101112
2 Locking device set, left/right
Item No.f134101126
1
2
4-sided drawer
1
2
3-sided drawer
1
2
Inset drawer
Ino(x)sys 662
Installation technology 757
Dynamoov assembly aids 806
Technical information 664
Br. artikla Opis artikla JMCijena bez
PDV-aPDV
Cijena sa PDV-om
1171101 Dynamoov vodilica 270mm, potp. Izvlaka, soft-close
par
116,78 25% 145,98
1171102 Dynamoov vodilica 300mm, potp. Izvlaka, soft-close 117,44 25% 146,80
1171104 Dynamoov vodilica 350mm, potp. Izvlaka, soft-close 118,10 25% 147,63
1171106 Dynamoov vodilica 400mm, potp. Izvlaka, soft-close 118,76 25% 148,45
1171108 Dynamoov vodilica 450mm, potp. izvlaka, soft-close 121,22 25% 151,52
1171110 Dynamoov vodilica 500mm, potp. izvlaka, soft-close 123,67 25% 154,59
1171112 Dynamoov vodilica 550mm, potp. izvlaka, soft-close 136,08 25% 170,10
1171119 Dynamoov vodilica 400mm, potp. izvlaka, Tipmatic 133,35 25% 166,69
1171121 Dynamoov vodilica 450mm, potp. izvlaka, Tipmatic 136,08 25% 170,10
1171123 Dynamoov vodilica 500mm, potp. izvlaka, Tipmatic 138,94 25% 173,68
1171125 Dynamoov vodilica 550mm, potp. izvlaka, Tipmatic 152,85 25% 191,06
1171220 Prihvatnik fronte Dynamoov vodilice, L/D 9,27 25% 11,59
4-strana ladica 3-strana ladica unutarnja ladica
1209
VODIlICE gRASS
• Vodilica s djelomičnim izvlačenjem• Nosivost 30 kg• Sigurno zatvaranje ladice• Moguće sigurno zaustavljanje u otvorenom položaju• Siguran hod vodilica
Br. artikla Opis artikla JMCijena bez
PDV-aPDV
Cijena sa PDV-om
1173981 Vodilica Grass 250mm, obična
par
18,72 25% 23,40
1173984 Vodilica Grass 300mm, obična 18,82 25% 23,52
1173987 Vodilica Grass 350mm, obična 18,92 25% 23,65
1173991 Vodilica Grass 400mm, obična 19,23 25% 24,03
1173994 Vodilica Grass 450mm, obična 19,55 25% 24,44
1173997 Vodilica Grass 500mm, obična 19,77 25% 24,71
1174000 Vodilica Grass 550mm, obična 22,50 25% 28,12
1174276 Vodilica Grass 600mm, obična 39,00 25% 48,75
1174281 Vodilica Grass 700mm, obična 62,45 25% 78,06
1174286 Vodilica Grass 800mm, obična 85,76 25% 107,21
Grass The caTalogue Packaging units are not covered in this catalogue; please enquire with your supplier736 05-2011
1
2
3
4
5
6
7
8
ROLLER SLIDES Single extension drawer 30 kg
•Single extension drawer slide with plastic rollers, 30 kg, installation width 12.5 mm, bottom mounting
•Parallel closing action•Reliable closing, minimal gap widths•Bottom edge clearance•clearance of screw heads in the cabinet
rail •Double stop•Secure stop in open state is possible
ORDER InfORmatIOn
1 Single extension drawer slide 30 kg
NL White Cream white Brown250 f080115434 f080073981 f080073983300 f080115435 f080073984 f080073986350 f080115436 f080073987 f080073990400 f080115437 f080073991 f080073993450 f080115438 f080073994 f080073996500 f080115439 f080073997 f080073999550 f080115440 f080074000 f080074002600 f080115432 f080074276 –650 f080074280 f080074279 –700 f080074282 f080074281 –750 f080074285 f080074284 –800 f080074287 f080074286 –
Technical information 742
Installation technology 757
13
Integra top vodilice
1411
INTEgRA TOP VODIlICE, H=53 mm, H=85, H=117, H=149
• Nosivost 30 kg• 2-D podešavanje fronte• Sigurno zatvaranje ladice• Moguće sigurno zaustavljanje u otvorenom položaju• Siguran hod vodilica
TEHNIčkI PODACI:
Grass The caTalogue Packaging units are not covered in this catalogue; please enquire with your supplier706 05-2011
1
2
3
4
5
6
7
8
Integra topDrawer h53
•load capacity 30 kg•2-D front panel adjustment for easy
alignment•Bottom corner clearance: drawer rail
is flush with the bottom corner, no chamfering required
•easy upgrade to full extension drawer slide
•Parallel closing action: reliable closing, minimal gap width
•Double stop: secure stop in open state is possible
order InformatIon
1 Integra drawer sides H53, left/right
NL White400 f084074923450 f084074926500 f084074917550 f084074928
2 front holder
Fixing method Left RightFor screw fixing f084115209 f084115210For press fitting f084077578 f084077579
1
2
Technical information 732
accessories 730
Grass The caTalogue Packaging units are not covered in this catalogue; please enquire with your supplier706 05-2011
1
2
3
4
5
6
7
8
Integra topDrawer h53
•load capacity 30 kg•2-D front panel adjustment for easy
alignment•Bottom corner clearance: drawer rail
is flush with the bottom corner, no chamfering required
•easy upgrade to full extension drawer slide
•Parallel closing action: reliable closing, minimal gap width
•Double stop: secure stop in open state is possible
order InformatIon
1 Integra drawer sides H53, left/right
NL White400 f084074923450 f084074926500 f084074917550 f084074928
2 front holder
Fixing method Left RightFor screw fixing f084115209 f084115210For press fitting f084077578 f084077579
1
2
Technical information 732
accessories 730
Br. artikla Opis artikla JMCijena bez
PDV-aPDV
Cijena sa PDV-om
1274917 Integra top ladica 500/53mm, bijela par 41,81 25% 52,271275210 Prihvatnik fronte za Integra top ladicu, H=53, D
kom8,31 25% 10,38
1275209 Prihvatnik fronte za Integra top ladicu, H=53, L 8,31 25% 10,38
1274972 Integra top ladica 275/85mm, bijela
par
36,99 25% 46,24
1274952 Integra top ladica 350/85mm, bijela 37,22 25% 46,53
1274959 Integra top ladica 400/85mm, bijela 37,45 25% 46,81
1274960 Integra top ladica 450/85mm, bijela 37,57 25% 46,97
1274961 Integra top ladica 500/85mm, bijela 40,60 25% 50,75
1274968 Integra top ladica 550/85mm, bijela 42,54 25% 53,18
1275242 Prihvatnik fronte za Integra top ladicu, Dkom
3,27 25% 4,09
1275240 Prihvatnik fronte za Integra top ladicu, L 3,27 25% 4,09
1275011 Pokrivna kapa za Integra top prihvatnik, PVC, bijeli
par
1,13 25% 1,411275131 Integra top ladica 350/117mm, bijela 50,23 25% 62,79
1275133 Integra top ladica 400/117mm, bijela 50,54 25% 63,18
1275135 Integra top ladica 450/117mm, bijela 51,90 25% 64,88
1275136 Integra top ladica 500/117mm, bijela 52,12 25% 65,15
1275137 Integra top ladica 550/117mm, bijela 59,02 25% 73,781275242 Prihvatnik fronte za Integra top ladicu, D
kom
3,27 25% 4,091275240 Prihvatnik fronte za Integra top ladicu, L 3,27 25% 4,091275011 Pokrivna kapa za Integra top prihvatnik, PVC, bijeli 1,13 25% 1,41
1275163 Integra top ladica 350/149mm, bijela
par
56,13 25% 70,16
1275165 Integra top ladica 400/149mm, bijela 56,48 25% 70,60
1275168 Integra top ladica 450/149mm, bijela 58,18 25% 72,72
1275170 Integra top ladica 500/149mm, bijela 58,54 25% 73,17
1275173 Integra top ladica 550/149mm, bijela 65,93 25% 82,42
1275242 Prihvatnik fronte za Integra top ladicu, D
kom
3,27 25% 4,09
1275240 Prihvatnik fronte za Integra top ladicu, L 3,27 25% 4,09
1275011 Pokrivna kapa za Integra top prihvatnik, PVC, bijeli 1,13 25% 1,41
1277419 Reling za Integra top ladicu, 450mm, bijeli
par
36,84 25% 46,06
1277420 Reling za Integra top ladicu, 500mm, bijeli 37,21 25% 46,51
1277421 Reling za Integra top ladicu, 550mm, bijeli 40,97 25% 51,21
15
INTEgRA TOP VODIlICE, H=53 mm, H=85, H=117, H=149
Nova Pro ladice
1613
VODIlICA ZA NOVA PRO, POTP. IZVlAkA, SOfT-ClOSE
VODIlICE ZA NOVA PRO lADICE
• Potpuno sinkronizirane vodilice• Soft-close integriran• Izvrsne klizne karakteristike• Maksimalna bočna stabilnost• Minimalan progib ladice• Nosivost 40 kg
TEHNIčkI PODACI:
Br. artikla Opis artikla JMCijena bez
PDV-aPDV
Cijena sa PDV-om
1373663 Vodilica za Nova Pro, 270mm, potp. izvlaka, soft-close
par
108,74 25% 135,93
1373665 Vodilica za Nova Pro, 350mm, potp. izvlaka, soft-close 109,35 25% 136,69
1373666 Vodilica za Nova Pro, 400mm, potp. izvlaka, soft-close 109,97 25% 137,46
1373667 Vodilica za Nova Pro, 450mm, potp. izvlaka, soft-close 110,58 25% 138,23
1373668 Vodilica za Nova Pro, 500mm, potp. izvlaka, soft-close 106,45 25% 133,06
1373669 Vodilica za Nova Pro, 550mm, potp. izvlaka, soft-close 128,32 25% 160,40
1
2
3
4
5
6
7
8Grass The CaTalogue Packaging units are not covered in this catalogue; please enquire with your supplier436 05-2011
Nova Pro Full extension drawer 40/70 kg Soft-close
•Fully synchronised slide technology with-out mid-way knock
•Integrated Soft-close technology•excellent running characteristics•Maximum lateral stability•Minimal drawer deflection•Suitable for all Nova Pro drawer sides•load capacity 40 kg and 70 kg
order iNformatioN
1 Nova Pro full extension drawer slides Soft-close left/right
NL 40 kg 70 kg270 f101063663 -300 f101063664 -350 f101063665 -400 f101063666 -450 f101063667 f101063711500 f101063668 f101063714550 f101063669 f101063717600 f101063670 f101063720650 - f101063723
1
Nova Pro Crystal Deluxe 406
Nova Pro Deluxe 416
Nova Pro Crystal Classic 446
Nova Pro Classic 460
Nova Pro Sensotronic 506
Nova Pro Sensomatic 511
Nova Pro.Full extension drawer 40/70 kg Soft-close. .
1
2
3
4
5
6
7
8Grass The CaTalogue Packaging units are not covered in this catalogue; please enquire with your supplier436 05-2011
Nova Pro Full extension drawer 40/70 kg Soft-close
•Fully synchronised slide technology with-out mid-way knock
•Integrated Soft-close technology•excellent running characteristics•Maximum lateral stability•Minimal drawer deflection•Suitable for all Nova Pro drawer sides•load capacity 40 kg and 70 kg
order iNformatioN
1 Nova Pro full extension drawer slides Soft-close left/right
NL 40 kg 70 kg270 f101063663 -300 f101063664 -350 f101063665 -400 f101063666 -450 f101063667 f101063711500 f101063668 f101063714550 f101063669 f101063717600 f101063670 f101063720650 - f101063723
1
Nova Pro Crystal Deluxe 406
Nova Pro Deluxe 416
Nova Pro Crystal Classic 446
Nova Pro Classic 460
Nova Pro Sensotronic 506
Nova Pro Sensomatic 511
Nova Pro.Full extension drawer 40/70 kg Soft-close. .
1714
TEHNIčkI PODACI:
• Izvrsne klizne karakteristike• Maksimalna bočna stabilnost• Minimalan progib ladice• Integrirano bočno i visinsko podešavanje• Fronta se može učvrstiti i skinuti bez alata• Jednaka širina dna i leđa ladice
STRANICE ZA NOVA PRO lADICE, MODEl DEluXEBr. artikla Opis artikla JM
Cijena bez PDV-a
PDVCijena sa PDV-om
1375000 Nova Pro stranica 270mm, L/D, siva
par
87,69 25% 109,61
1375006 Nova Pro stranica 350mm, L/D, siva 88,18 25% 110,23
1375009 Nova Pro stranica 400mm, L/D, siva 88,68 25% 110,85
1375012 Nova Pro stranica 450mm, L/D, siva 89,17 25% 111,46
1375015 Nova Pro stranica 500mm, L/D, siva 85,90 25% 107,38
1375018 Nova Pro stranica 550mm, L/D, siva 103,53 25% 129,41
1377330 Pokrivna kapa za Nova Pro, PVC, sivakom
0,55 25% 0,68
1371855 Prihvatnik fronte Nova Pro ladice 1,42 25% 1,78
Opis artikla JMCijena bez
PDV-aPDV
Cijena sa PDV-om
Nova Pro ladica 270/90 mm
set
200,37 25% 250,46
Nova Pro ladica 350/90 mm 201,47 25% 251,84
Nova Pro ladica 400/90 mm 202,59 25% 253,24
Nova Pro ladica 450/90 mm 203,69 25% 254,61
Nova Pro ladica 500/90 mm 196,29 25% 245,36
Nova Pro ladica 550/90 mm 235,79 25% 294,74
1
2
3
4
5
6
7
8Packaging units are not covered in this catalogue; please enquire with your supplierGrass The CaTalogue416 05-2011
Nova Pro DeluxeDrawer h90
• Fully synchronised slide technology without mid-way knock
•excellent running characteristics•Maximum stability •Minimal drawer deflection•Integrated height and side adjustment•Drawer front can be fitted and removed
without tools•Bottom panel machining not required•Width of bottom and back panel is the
same•optimal use of storage space due to
straight inside surfaces and narrow con-struction width
orDer iNformatioN
1 Nova Pro Deluxe drawer sides H90, left/right
NL Metallic Pure white270 f100065000 f100065027300 f100065003 f100065030350 f100065006 f100065033400 f100065009 f100065036450 f100065012 f100065039500 f100065015 f100065042550 f100065018 f100065045600 f100065021 f100065048650 f100065024 f100076500
2 Nova Pro full extension drawer slides soft-close left/right
NL 40 kg 70 kg270 f101063663 –300 f101063664 –350 f101063665 –400 f101063666 –450 f101063667 f101063711500 f101063668 f101063714550 f101063669 f101063717600 f101063670 f101063720650 – f101063723
3 installation hook set for screw fixing for H90 consisting of: items 3a, 3b, 3c
Metallic Pure whitef102061675 f102076547
1
2
3a
3b
3c
Nova Pro organising systems 483
Nova Pro Tipmatic Plus 438
Nova Pro Sensotronic 506
Nova Pro Sensomatic 511
Technical information 440
Installation technology 757
1
2
3
4
5
6
7
8Packaging units are not covered in this catalogue; please enquire with your supplierGrass The CaTalogue416 05-2011
Nova Pro DeluxeDrawer h90
• Fully synchronised slide technology without mid-way knock
•excellent running characteristics•Maximum stability •Minimal drawer deflection•Integrated height and side adjustment•Drawer front can be fitted and removed
without tools•Bottom panel machining not required•Width of bottom and back panel is the
same•optimal use of storage space due to
straight inside surfaces and narrow con-struction width
orDer iNformatioN
1 Nova Pro Deluxe drawer sides H90, left/right
NL Metallic Pure white270 f100065000 f100065027300 f100065003 f100065030350 f100065006 f100065033400 f100065009 f100065036450 f100065012 f100065039500 f100065015 f100065042550 f100065018 f100065045600 f100065021 f100065048650 f100065024 f100076500
2 Nova Pro full extension drawer slides soft-close left/right
NL 40 kg 70 kg270 f101063663 –300 f101063664 –350 f101063665 –400 f101063666 –450 f101063667 f101063711500 f101063668 f101063714550 f101063669 f101063717600 f101063670 f101063720650 – f101063723
3 installation hook set for screw fixing for H90 consisting of: items 3a, 3b, 3c
Metallic Pure whitef102061675 f102076547
1
2
3a
3b
3c
Nova Pro organising systems 483
Nova Pro Tipmatic Plus 438
Nova Pro Sensotronic 506
Nova Pro Sensomatic 511
Technical information 440
Installation technology 757
1815
Br. artikla Opis artikla JMCijena bez
PDV-aPDV
Cijena sa PDV-om
1375970 Reling za Nova Pro, 350mm, L/D, sivi
par
34,59 25% 43,241375971 Reling za Nova Pro, 400mm, L/D, sivi 34,79 25% 43,491375972 Reling za Nova Pro, 450mm, L/D, sivi 34,98 25% 43,731375973 Reling za Nova Pro, 500mm, L/D, sivi 35,86 25% 44,831375974 Reling za Nova Pro, 550mm, L/D, sivi 42,00 25% 52,50
RElINg ZA NOVA PRO lADICE
ugRADBENE MJERE ZA fRONTE ugRADBENE MJERE ZA lEÐA kROJNE MJERE
TEHNIčkI PODACI:
1
2
3
4
5
6
7
8Packaging units are not covered in this catalogue; please enquire with your supplierGrass The CaTalogue420 05-2011
Nova Pro DeluxePot drawer h90 with round railing
• Fully synchronised slide technology without mid-way knock
•excellent running characteristics•Maximum stability •Minimal drawer deflection•Integrated height and side adjustment•Tilt angle adjustment using railing•Drawer front can be fitted and removed
without tools•Bottom panel machining not required•Width of bottom and back panel is the
same
• optimal use of storage space due to straight inside surfaces and narrow construction width
orDer iNformatioN
1 Nova Pro Deluxe drawer sides H90, left/right
NL Metallic Pure white270 f100065000 f100065027300 f100065003 f100065030350 f100065006 f100065033400 f100065009 f100065036450 f100065012 f100065039500 f100065015 f100065042550 f100065018 f100065045600 f100065021 f100065048650 f100065024 f100076500
2 Nova Pro full extension drawer slides soft-close left/right
NL 40 kg 70 kg270 f101063663 –300 f101063664 –350 f101063665 –400 f101063666 –450 f101063667 f101063711500 f101063668 f101063714550 f101063669 f101063717600 f101063670 f101063720650 – f101063723
3 round railing set for screw fixing, left/right
NL Metallic Pure white300 f102045969 f102045962350 f102045970 f102045963400 f102045971 f102045964450 f102045972 f102045965500 f102045973 f102045966550 f102045974 f102045967600 f102045975 f102045968650 f102068000 f102077441
4 installation hook set for screw fixing for H90 consisting of: items 4a, 4b, 4c
Metallic Pure whitef102061675 f102076547
1
2
34c
4a
4b
Nova Pro organising systems 483
Nova Pro Tipmatic Plus 438
Nova Pro Sensotronic 506
Nova Pro Sensomatic 511
Technical information 440
Installation technology 757
1
2
3
4
5
6
7
8All dimensions in millimetres. Subject to changes The CaTalogue Grass 42105-2011
Drawer systemsNova Pro Deluxe
Pot Drawer H90 witH rouND railiNg
iNstallatioN iNformatioN all dimensions in millimetres
Front panel installation dimensions Back panel installation dimensions Cutting dimensions 1
Ø 3.5 x 15
LWK
6432
50
40.5
FST
min
. 49.
5
42.5
21.5
FAS
16
BB = LWK - 58
7
152
min
. 116
RWB = LWK - 58
min
. 14
Ø 10
1016
7315
264
RWB = LWK - 58
152
BB = LWK - 58BL
= N
L - 1
9RW
H
BB
RW
116 mm
Fixing positions for full extension drawer
28
MET = NL + 3
9.5
270
160
224
288 0
KV
300
350
400
450
500
550
600
37
40 kg
3728
MET = NL + 3
9.5
32288
352 0
450
500
550
600
650
KV
320
384
70 kg
legeND
B Bottom panelBB Bottom panel widthBL Bottom panel lengthFAS Front overlay, side
FST Front overlayKV Front edge of cabinetLWK Inside cabinet widthMET Minimum installation depth
NL Nominal lengthRW Back panelRWB Width of back panelRWH Height of back panel
euro screw Ø 6 x 13 mm
1
2
3
4
5
6
7
8All dimensions in millimetres. Subject to changes The CaTalogue Grass 42105-2011
Drawer systemsNova Pro Deluxe
Pot Drawer H90 witH rouND railiNg
iNstallatioN iNformatioN all dimensions in millimetres
Front panel installation dimensions Back panel installation dimensions Cutting dimensions 1
Ø 3.5 x 15
LWK
6432
50
40.5
FST
min
. 49.
5
42.5
21.5
FAS
16
BB = LWK - 58
7
152
min
. 116
RWB = LWK - 58
min
. 14
Ø 10
1016
7315
264
RWB = LWK - 58
152
BB = LWK - 58
BL =
NL
- 19
RWH
BB
RW
116 mm
Fixing positions for full extension drawer
28
MET = NL + 3
9.5
270
160
224
288 0
KV
300
350
400
450
500
550
600
37
40 kg
3728
MET = NL + 3
9.5
32288
352 0
450
500
550
600
650
KV
320
384
70 kg
legeND
B Bottom panelBB Bottom panel widthBL Bottom panel lengthFAS Front overlay, side
FST Front overlayKV Front edge of cabinetLWK Inside cabinet widthMET Minimum installation depth
NL Nominal lengthRW Back panelRWB Width of back panelRWH Height of back panel
euro screw Ø 6 x 13 mm
1
2
3
4
5
6
7
8All dimensions in millimetres. Subject to changes The CaTalogue Grass 42105-2011
Drawer systemsNova Pro Deluxe
Pot Drawer H90 witH rouND railiNg
iNstallatioN iNformatioN all dimensions in millimetres
Front panel installation dimensions Back panel installation dimensions Cutting dimensions 1
Ø 3.5 x 15
LWK
6432
50
40.5
FST
min
. 49.
5
42.5
21.5
FAS
16
BB = LWK - 58
7
152
min
. 116
RWB = LWK - 58
min
. 14
Ø 10
1016
7315
264
RWB = LWK - 58
152
BB = LWK - 58
BL =
NL
- 19
RWH
BB
RW
116 mm
Fixing positions for full extension drawer
28
MET = NL + 3
9.5
270
160
224
288 0
KV
300
350
400
450
500
550
600
37
40 kg
3728
MET = NL + 3
9.5
32288
352 0
450
500
550
600
650
KV
320
384
70 kg
legeND
B Bottom panelBB Bottom panel widthBL Bottom panel lengthFAS Front overlay, side
FST Front overlayKV Front edge of cabinetLWK Inside cabinet widthMET Minimum installation depth
NL Nominal lengthRW Back panelRWB Width of back panelRWH Height of back panel
euro screw Ø 6 x 13 mm
1916
RElINg ZA VISOkE fRONTE
1
2
3
4
5
6
7
8Packaging units are not covered in this catalogue; please enquire with your supplierGrass The CaTalogue424 05-2011
Nova Pro DeluxePot drawer h90 with round railing and front support
•additional fixing points for optimal stability with high fronts
•Fully synchronised slide technology with-out mid-way knock
•excellent running characteristics•Maximum stability •Minimal drawer deflection•Integrated height and side adjustment•Tilt angle adjustment using railing•Drawer front can be fitted and removed
without tools•Bottom panel machining not required•Width of bottom and back panel is the
same
•optimal use of storage space due to straight inside surfaces and narrow con-struction width
orDer iNformatioN
1 Nova Pro Deluxe drawer sides H90, left/right
NL Metallic Pure white400 f100065009 f100065036450 f100065012 f100065039500 f100065015 f100065042550 f100065018 f100065045600 f100065021 f100065048650 f100065024 f100076500
2 Nova Pro full extension drawer slides soft-close left/right
NL 40 kg 70 kg400 f101063666 –450 f101063667 f101063711500 f101063668 f101063714550 f101063669 f101063717600 f101063670 f101063720650 – f101063723
3 installation hook set for screw fixing for H90 consisting of: items 3a, 3b, 3c
Metallic Pure whitef102061675 f102076547
4 round railing with front support
NL Metallic Pure white400 f102078789 f102078795450 f102078790 f102078796500 f102078791 f102078797550 f102078792 f102078798600 f102078793 f102078799650 f102078794 f102078800
1
2
4
3a
3b
3c
Nova Pro organising systems 483
Nova Pro Tipmatic Plus 438
Nova Pro Sensotronic 506
Nova Pro Sensomatic 511
Technical information 440
Installation technology 757
1
2
3
4
5
6
7
8Packaging units are not covered in this catalogue; please enquire with your supplierGrass The CaTalogue424 05-2011
Nova Pro DeluxePot drawer h90 with round railing and front support
•additional fixing points for optimal stability with high fronts
•Fully synchronised slide technology with-out mid-way knock
•excellent running characteristics•Maximum stability •Minimal drawer deflection•Integrated height and side adjustment•Tilt angle adjustment using railing•Drawer front can be fitted and removed
without tools•Bottom panel machining not required•Width of bottom and back panel is the
same
•optimal use of storage space due to straight inside surfaces and narrow con-struction width
orDer iNformatioN
1 Nova Pro Deluxe drawer sides H90, left/right
NL Metallic Pure white400 f100065009 f100065036450 f100065012 f100065039500 f100065015 f100065042550 f100065018 f100065045600 f100065021 f100065048650 f100065024 f100076500
2 Nova Pro full extension drawer slides soft-close left/right
NL 40 kg 70 kg400 f101063666 –450 f101063667 f101063711500 f101063668 f101063714550 f101063669 f101063717600 f101063670 f101063720650 – f101063723
3 installation hook set for screw fixing for H90 consisting of: items 3a, 3b, 3c
Metallic Pure whitef102061675 f102076547
4 round railing with front support
NL Metallic Pure white400 f102078789 f102078795450 f102078790 f102078796500 f102078791 f102078797550 f102078792 f102078798600 f102078793 f102078799650 f102078794 f102078800
1
2
4
3a
3b
3c
Nova Pro organising systems 483
Nova Pro Tipmatic Plus 438
Nova Pro Sensotronic 506
Nova Pro Sensomatic 511
Technical information 440
Installation technology 757
Br. artikla Opis artikla JMCijena bez
PDV-aPDV
Cijena sa PDV-om
1371088 Reling za visoke fronte Nova Pro, 500mm, L/D, sivi par 102,81 25% 128,52
TEHNIčkI PODACI:
2017
VODIlICE I ODBOJNIk TIPMATIC
• Sustav mehaničkog otvaranja• Mogućnost aktiviranja bilo gdje na površini fronte• Potpuno izvlačenje ladice, što omogućuje optimalan pristup sadržaju ladice• Potpuno sinkronizirana vodilica• Pouzdano zatvaranje• Izvrsne klizne karakteristike• Maksimalna bočna stabilnost• Minimalan progib ladice• Nosivost 40 kg
TEHNIčkI PODACI:
Br. artikla Opis artikla JMCijena bez
PDV-aPDV
Cijena sa PDV-om
1378290 Vodilica za Nova Pro, 270mm, Tipmatic, potp. izvlaka,
par
160,19 25% 200,241378292 Vodilica za Nova Pro, 350mm, Tipmatic, potp. izvlaka, 161,10 25% 201,381378293 Vodilica za Nova Pro, 400mm, Tipmatic, potp. izvlaka, 162,01 25% 202,511378294 Vodilica za Nova Pro, 450mm, Tipmatic, potp. izvlaka, 162,91 25% 203,641378295 Vodilica za Nova Pro, 500mm, Tipmatic, potp. izvlaka, 166,24 25% 207,791378296 Vodilica za Nova Pro, 550mm, Tipmatic, potp. izvlaka, 194,50 25% 243,121378399 Odbojnik fronte za Tipmatic
kom0,82 25% 1,02
1371855 Prihvatnik fronte Nova Pro ladice 1,42 25% 1,78
1
2
3
4
5
6
7
8Grass The CaTalogue Packaging units are not covered in this catalogue; please enquire with your supplier478 05-2011
Nova Pro Tipmatic Plus Full extension drawer 40/70 kg
•Mechanical opening system•Can be triggered anywhere on the surface
of the front•Drawer extends fully to allow optimal
access to contents•Fully synchronised slide technology with-
out mid-way knock•Reliable closing through catch function•excellent running characteristics•Maximum lateral stability•Minimal drawer deflection•Suitable for all Nova Pro drawer sides•load capacity 40 kg and 70 kg
order iNformatioN
1 Nova Pro full extension drawer slides tipmatic Plus left/right
NL 40 kg 70 kg270 f101068290 -300 f101068291 -350 f101068292 -400 f101068293 -450 f101068294 -500 f101068295 f101068301550 f101068296 f101068302600 - f101068303650 - f101068304
2 Synchronisation unit
KB 16 mm 19 mm450 f102068250 f102068262600 f102068253 f102068264900 f102068255 f102068266
1200 f102068257 f102068268
3 locking unit, left/right
Item No.f102068270
4 Synchronisation rod for cutting to length
KB Item No.1200 f102068272
5 Synchronisation lever
Item No.f102068273
6 front buffer for tipmatic Plus
Item No.f145068399
61
54
3
2
Nova Pro Crystal Deluxe 406
Nova Pro Deluxe 416
Nova Pro Crystal Classic 446
Nova Pro Classic 460
Nova Pro. .Tipmatic Plus.Full extension drawer 40/70 kg. 1
2
3
4
5
6
7
8Grass The CaTalogue Packaging units are not covered in this catalogue; please enquire with your supplier500 05-2011
Nova Pro accessories
•Maximum stability for extra-wide regular and pot drawers
•Top pull-out comfort and perfect running•For drawer widths of up to 1500 mm
Side StabiliSiNg device
1 torsion bar set consisting of: 1a torsion bar (1x) 1b support left/right (1x) 1c pinion (2x)
KB Item No.900 F102066385
1000 F1020663861100 F1020663871200 F1020663881500 F102066389
Note: for special outside cabinet width: torsion bar KB - 100 mm
2 gliding channel left/right
NL Aluminium metallic450 F102050864500 F102050865550 F102050866600 F102050867650 F102050868
Sheet metal ScrewS
Designation Item No.
4.8 x 13 mm (when steel back panel is used) F145050869
Nova Pro Crystal Deluxe 406
Nova Pro Deluxe 416
Nova Pro Crystal Classic 446
Nova Pro Classic 460
1a
1b
1c2
Nova Pro..Accessories. .
2118
STABIlIZATOR ZA ŠIROkE lADICE
• Maksimalna stabilnost kod širokih ladica• Vrhunski konfor i savršeno klizanje• Za ladice do 1500 mm širine TEHNIčkI PODACI:
Br. artikla Opis artikla JMCijena bez
PDV-aPDV
Cijena sa PDV-om
1376388 Stabilizator za široke ladice (1200 mm) set 61,00 25% 76,251370865 Zupčasta letva za stabilizator ladice par 36,56 25% 45,70
1
2
3
4
5
6
7
8Grass The CaTalogue Packaging units are not covered in this catalogue; please enquire with your supplier500 05-2011
Nova Pro accessories
•Maximum stability for extra-wide regular and pot drawers
•Top pull-out comfort and perfect running•For drawer widths of up to 1500 mm
Side StabiliSiNg device
1 torsion bar set consisting of: 1a torsion bar (1x) 1b support left/right (1x) 1c pinion (2x)
KB Item No.900 F102066385
1000 F1020663861100 F1020663871200 F1020663881500 F102066389
Note: for special outside cabinet width: torsion bar KB - 100 mm
2 gliding channel left/right
NL Aluminium metallic450 F102050864500 F102050865550 F102050866600 F102050867650 F102050868
Sheet metal ScrewS
Designation Item No.
4.8 x 13 mm (when steel back panel is used) F145050869
Nova Pro Crystal Deluxe 406
Nova Pro Deluxe 416
Nova Pro Crystal Classic 446
Nova Pro Classic 460
1a
1b
1c2
Nova Pro..Accessories. .
Kinvaro podizni sustavi
2320
OkOV ZA PODIZNA VRATA S INTEgRIRANIM uBlAŽIVAčEM
Br. artikla Opis artikla JMCijena bez
PDV-aPDV
Cijena sa PDV-om
2170002 Kinvaro T-65 podizni okov set 121,35 25% 151,69
•Osobito komforno otvaranje zbog mehanizma za otvaranje s oprugom Lagano otvaranje i zatvaranje vrata Mali utrošak snage• Nisu potrebne nikakve spojnice u vrhu korpusa Brža montaža• Sigurno zaustavljanje vrata u svakom položaju, od 45° nadalje• Moguća je nadogradnja korpusa• Široki spektar primjene za srednje do velika vrata Širina vrata 300 - 1200 mm Visina vrata 250 - 600 mm Veliko područje podešavanja sile opruge od malih, laganih vrata od prirodnog drva pa do teških izvedbi Za najrazličitije materijale vrata i težine vrata, kao što su npr. drvo, MDF, staklo sa širokim aluminijskim ili drvenim okvirom• Kut otvaranja 100°• Integrirani i podesivi amortizer
TEHNIčkI PODACI:
podešavanje snage opruge
podešavanje amortizera za zatvaranje
bočna stranica
3.2
FAS
19*
DIN7985M4x10-Z
Kinvaro. .T-65 lift-up flap fitting. .
Grass THE CATALOGUE Packaging units are not covered in this catalogue; please enquire with your supplier54 05-2011
1
2
3
4
5
6
7
8
Kinvaro T-65 lift-up flap fitting
•Integrated adjustable damping system enables quiet, gentle closing
•Extremely comfortable opening thanks to spring-supported opening mechanism
•No hinges fitted to the top panel•Variable opening angle - holds flap
securely at any angle between 45° and 100°
•Allows additional cabinet installation above
•Range of flaps: width: up to 1200 mm height: 250 – 600 mm
application ranGE
Flap height
Flap weight incl. handle (kg)
Spring on one side yellow
Spring on both sides
yellow
Spring on both sides
black250 0.9 – 2.1 1.8 – 4.2 2.4 – 7.4300 0.7 – 1.7 1.4 – 3.4 2.0 – 6.3350 - 1.0 – 2.9 1.7 – 5.4400 - 0.8 – 2.5 1.5 – 4.7450 - 0.7 – 2.2 1.3 – 4.2500 - 0.6 – 2.0 1.3 – 3.9550 - - 1.3 – 3.4600 - - 1.3 – 3.1
ordEr information
Kinvaro t-65 set
Designation Springs Version for Overlay Item No.
Kinvaro T-65 on the right without and on the left with damper, pre-assembled springs, black, incl. cover caps, grey RAL 7040, 2 springs, yellow, loose
Black/yellow
wood variable f151000002
aluminium
13 f15114508514 f15114504816 f15114514417 f151145049
Installation technology 757
Kinvaro T-65 adjustment options 72
1 2
2
1Kinvaro t-65 set comprises:
1 Fitting on the right without and on the left with damper (1x)
2 Cover caps, right and left, in grey RAL 7040 (1x)
1 Springs, yellow, loose (2x)
1 Paper template (1x)
1 Installation instructions (1x)
KINVARO - T65
2421
OkOV ZA PODIZNA VRATA S INTEgRIRANIM uBlAŽIVAčEM
Br. artikla Opis artikla JMCijena bez
PDV-aPDV
Cijena sa PDV-om
2170003 Kinvaro T-71 podizni okov set 283,93 25% 354,91
13
3
2
2
1
kINVARO - T71
•Osobito komforno otvaranje zbog mehanizma za otvaranje s oprugom Lagano otvaranje i zatvaranje vrata Mali utrošak snage• Nisu potrebne nikakve spojnice u vrhu korpusa Brža montaža• Sigurno zaustavljanje vrata u svakom položaju• Moguća je nadogradnja korpusa• Široki spektar primjene za srednje do velika vrata Širina vrata 300 - 1200 mm Visina vrata 300 - 600 mm Veliko područje podešavanja sile opruge od malih, laganih vrata od prirodnog drva pa do teških izvedbi Za najrazličitije materijale vrata i težine vrata, kao što su npr. drvo, MDF, staklo sa širokim aluminijskim ili drvenim okvirom• Jednostavna montaža prednjice bez uporabe alata•Trodimenzionalno izravno namiještanje prednjice• Kut otvaranja 110°• Integrirani i podesivi amortizer
TEHNIčkI PODACI:
podešavanje amortizera za zatvaranje
stranica s clipom za 3D-podešavanje naznačena
podešavanje amortizera za zatvaranje
vrh korpusa
bočna stranicavr
ata
2522
OkOV ZA PODIZNA VRATA S INTEgRIRANIM uBlAŽIVAčEMBr. artikla Opis artikla JM
Cijena bez PDV-a
PDVCijena sa PDV-om
2170004 Kinvaro T-76 podizni okov set 332,05 25% 415,06
13
3
2
2
1
TEHNIčkI PODACI:
podešavanje amortizera za zatvaranje
stranica s clipom za 3D-podešavanje naznačena
podešavanje amortizera za zatvaranje
vrh korpusa
bočna stranica
vrata
•Osobito komforno otvaranje zbog mehanizma za otvaranje s oprugom Lagano otvaranje i zatvaranje vrata Mali utrošak snage• Nisu potrebne nikakve spojnice u vrhu korpusa Brža montaža• Sigurno zaustavljanje vrata u svakom položaju• Moguća je nadogradnja korpusa• Široki spektar primjene za srednje do velika vrata Širina vrata 550 - 1200 mm Visina vrata 400 - 600 mm Veliko područje podešavanja sile opruge od malih, laganih vrata od prirodnog drva pa do teških izvedbi Za najrazličitije materijale vrata i težine vrata, kao što su npr. drvo, MDF, staklo sa širokim aluminijskim ili drvenim okvirom• Jednostavna montaža prednjice bez uporabe alata•Trodimenzionalno izravno namiještanje prednjice• Kut otvaranja 110°• Integrirani i podesivi amortizer
kINVARO - T76
2623
OkOV ZA PODIZNO - PREklOPNA VRATA S INTEgRIRANIM AMORTIZEROM
Br. artikla Opis artikla JMCijena bez
PDV-aPDV
Cijena sa PDV-om
2177489 Kinvaro F-20 podizni okov, L, tip 6/D, 700-750 mm, 10-18 kg
kom
208,35 25% 260,44
2177490 Kinvaro F-20 podizni okov, D, tip 6/D, 700-750 mm, 10-18 kg 208,35 25% 260,44
2177491 Kinvaro F-20 podizni okov, L, tip 7/C, 750-800 mm, 6-15,6 kg 203,83 25% 254,79
2177492 Kinvaro F-20 podizni okov, D, tip 7/C, 750-800 mm, 6-15,6 kg 203,83 25% 254,79
2177493 Kinvaro F-20 podizni okov, L, tip 7/D, 750-800 mm, 8,6-19,2 kg 208,35 25% 260,44
2177494 Kinvaro F-20 podizni okov, D, tip 7/D, 750-800 mm, 8,6-19,2 kg 208,35 25% 260,44
2175020 Međuspojnica za Kinvaro F-20 podizni okov 30,30 25% 37,88
2175262 Pokrivna kapa za Kinvaro F-20, L, siva 12,69 25% 15,87
2175263 Pokrivna kapa za Kinvaro F-20, D, siva 12,69 25% 15,87
2177527 Prihvatnik fronte Kinvaro F-20 19,93 25% 24,91
KINVARO - F20
• Pogodan za široki spektar vrata• Moguća ugradnja u sve kombinacije vrata: Širina: 400 - 1200 mm Visina: do 2 x 400 mm Za vrata od 900 mm i šira potrebne su 3 spojnice• Za podizanje i preklapanje vrata• Potreban mali prostor za otvaranje vrata i otvorena vrata• Lagano podizanje zbog potpomognute funkcije otvaranja Sigurno zaustavljanje vrata u svakom položaju Vrata se mogu individualno podesiti na optimalnu radnu visinu Moguće namiještanje ograničenja otvaranja do 90°• Mehanizam Integrirani i podesivi amortizer u smjeru zatvaranja• Široki spektar primjene od 3,8 do 19,2 kg Za najrazličitije materijale i težine vrata, kao što su npr. drvo, MDF, staklo sa širokim aluminijskim ili drvenim okvirom• Jednostavna montaža prednjice bez uporabe alata i lagano namještanje Sa čepovima za fiksiranje i predmontiranim euro-vijcima• Minimalna dubina ugradnje 260 mm• Isturenost vrata u otvorenom položaju max. 170 mm
GRASS KATALOG
KINVARO T-65 KINVARO T-71
KINVARO F-20
KINVARO T-76
Spojnice Tiomos i Nexis click-on Vodi
lice
Dyn
amoo
v i o
bičn
e
Integra top vodilice Nova Pro ladice Kinv
aro
podi
zni s
usta
vi
Centar Radno vrijeme Okovi - kontakt podaci
DRVNI CENTAR ZAGREB pon-pet: 07:00 - 20:30 T: 01 5502 406 F: 01 5502 408Jankomir - Vučak 30 sub: 07:00 - 14:00 E: [email protected]
DRVNI CENTAR ZAGREB pon-pet: 07:00 - 20:30 T: 01 5509 660 F: 01 5509 661Vrbani - Našička 144 sub: 07:00 - 14:00 E: [email protected]
POSLOVNI CENTAR ŽITNJAK pon-pet: 07:00 - 20:00 T: 01 5580 311 F: 01 5508 312Slavonska avenija 62 sub: 08:00 - 14:00 E: [email protected]
DRVNI CENTAR RIJEKA pon-pet: 07:00 - 20:30 T: 051 580 900 F: 051 580 901Škurinje - Osječka 73 sub: 07:00 - 15:00 E: [email protected]
DRVNI CENTAR PULA pon-pet: 09:00 - 17:00 T: 052 350 807 F: 052 350 806galižana - Puljska 31 sub: 08:00 - 12:00 E: [email protected]
DRVNI CENTAR ZADAR pon-pet: 08:00 - 18:00 T: 023 341 653 F: 023 341 637luka gaženica - gaženička 28 sub: 08:00 - 13:00 E: [email protected]
DRVNI CENTAR SISAK pon-pet: 08:00 - 20:00 T: 044 532 152 F: 044 532 154Zagrebačka 48 sub: 08:00 - 13:00 E: [email protected]
DRVNI CENTAR VARAŽDIN pon-pet: 07:30 - 20:00 T: 042 204 297 F: 042 204 298Cehovska 2 sub: 08:00 - 14:00 E: [email protected]
DRVNI CENTAR SL. BROD pon-pet: 08:00 - 18:00 T: 035 260 383 F: 035 260 384Sjeverna vezna cesta 27 sub: 08:00 - 13:00 E: [email protected]
PRODAJNI CENTRI
www.elgrad.hr