Okuma "Heritage" # ES-L8-II CNC Turning Center

ONLINE AUCTION OKUMA CNC TURNING CENTERS

MACHINE TOOLS • INSPECTION TOOLINGPLANT SUPPORT

By Order of:

Blahut Machine Co.655 Plains Rd., Milford, Connecticut 06461

Bidding Closes: Thursday, March 6th, 1:00 PM (ET)Inspection: Tuesday, March 4th, 9 AM to 4 PM

Sale under Management of:Thomas Industries, Inc.

2414 Boston Post Road, Guilford, CT 06437-2310 Phone (203) 458-0709 • Fax (203) 458-0727

email: gavel@thomasauction.com www.thomasauction.com

Okuma "Cadet" # L-1420 CNC Turning Center

Okuma # LB-15-II-W CNC Turning Center W/ Sub-Spindle

All Okuma's Purchased NEWby Blahut New

2008New 1998

12” Chuck

Okuma "Cadet Big Bore" # LNC-8 Turning Center

New 1999

New 1996

All Okuma's Used to Mfg. Parts for theElectronic Industry

3.15”SpindleBore

ONLINE AUCTION – INTERNET BIDDING ONLY2

EXCEPTIONALLY MAINTAINED OKUMA CNC TURNING CENTERS

(New 2008) Okuma “Heritage” # ES-L8-II CNC Turning CenterW/ 8” Kitagawa Hyd. 3-Jaw Chuck, (12) Pos.Turret, 21.65”Swing, 17.7” Swing Over Saddle, 8.27” Max.Turn Diameter,19.68” Max.Turn Length, A-2-6 Spindle Nose, 2.44” SpindleBore, Spindle Speeds 100-4200 RPM, Tailstock, Parts Catcher,Chip Conveyor, Mist-Buster, Transformer & Okuma OSP-U10LCNC Control, S/N 8233

(New 1998) Okuma “Cadet” # L-1420 CNC Turning Center W/12” Kitagawa Hyd. 3-Jaw Chuck, (12) Pos.Turret, 24.24”Swing, 18.90” Swing Over Saddle, 14.17” Max.TurningDiameter, 26.38” Max.Turning Length, # A-2-8 Spindle, 3.15”Spindle Bore, Spindle Speed 65-3200 RPM, Tailstock, PartsCatcher, Built-In MistBuster, Chip Conveyor & Okuma OSP-700L CNC Control,S/N 10002-0662

(New 1999) Okuma # LB-15-II-W CNC Turning Center W/ Sub-Spindle with 5” Kitagawa Hyd. Chuck, 8” Kitagawa Hyd. 3-Jaw Chuck (on Main Spindle), (12) Pos.Turret, 20” Swing,Max.Turning Diameter 9.84”, Max.Turning Length 19.69”,Spindle Nose # A-2-6, Spindle Bar Cap. 2.12”, Spindle Speeds35-3800, Tailstock, Parts Catcher, Tool Eye Toolsetter, ChipConveyor & Okuma OSP-7000L CNC Control, S/N 2336

(New 1996) Okuma “Cadet Big Bore” # LNC-8 CNC TurningCenter W/ 10” Kitagawa Hyd. 3-Jaw Chuck, (12)Pos.Turret, 15.75” Swing, Max.Turning Diameter 9.84”,Max.Turning Length 19.69”, Spindle Nose # A-2-8, SpindleBore 3.15”, Spindle Speeds 65-3500 RPM, Tailstock, PartsCatcher & Okuma OSP-5020L CNC Control, S/N 9921

(New 1991) Okuma # LB-15 CNC Turning Center W/ 8”Kitagawa Hyd. 3-Jaw Chuck, (12) Pos.Turret, 15.75”Swing, Max.Turning Diameter 9.84”, Max.Turning Length19.69”, Spindle Nose # A-2-6, Spindle Bore 2.12”, SpindleSpeeds 65-3500 RPM, Tailstock & Okuma OSP-5020L CNCControl (W/ New Spindle Drive Installed 2012), S/N C-849

(New 2005) Vectrax # GS-16V 3HP Vertical Milling MachineW/ 9”x 49” Table, 12” Knee Travel, Vari-Speed SpindleSpeeds 70-4200 RPM, (2) Power-Feed Units, Accu-RiteDigital Readout, S/N 8330205

Bridgeport “Series I”, 2 HP Vertical Milling Machine W/ 9”x42” Table, 12” Knee Travel, Chrome Ways,(2) Power FeedUnits, Mitutoyo Digital Readout, S/N 194244

COMPLETE LOT CATALOG AND PHOTOS WWW.THOMASAUCTION.COM

Okuma "Heritage" # ES-L8-II CNC Turning Center Okuma "Cadet" # L-1420 CNC Turning Center

New 1998

New 2008

Okuma # LB-15-II-W CNC Turning Center W/ Sub-Spindle

New 1999

Vectrax # GS-16V 3HP Vert. MillingMachine

New 2005

View of Sub-Spindle

All Okuma's Purchased NEWby Blahut

All Okuma's IGF Capability

12” Chuck

Sub Spindle

All Okuma's

have Toolingand Manualswith them.

REGISTER AND BID AT: WWW.THOMASAUCTION

BIDDING CLOSES: THURSDAY, MARCH 6TH, 1:00 PM (ET)

3

(New 2005) Birmingham # YCL-1440GH “Gap Type” EngineLathe W/ 14”/20”x 40” Capacity, Threading, Spindle Nose #D-1-4, Spindle Speeds 45-1800 RPM, Coolant System, 5CCollet Closer, 3&4 Jaw Chucks, Steady-Rest,Follow-Rest &Toolpost, S/N 640501

Deltronic 14” Optical Comparator # DV-114W/ Deltronic MPC-5Digital Measurement Readout, S/N 01SA-3026

(New 2000) MSC Surface Grinder # SGS-618W/ 6” x 18”Magnetic Chuck,S/N 89011

(New 1992) COZEN #AH-1010JAY “Automatic Feed” HorizontalMetal Cutting Band Saw, S/N 924256

(New 1997) Bewo-Scotchman Cut Off Saw # 275-H, S/N22380997

MSC Milling and Drilling Machine # 9512914, S/N 837764Rutland Drilling & Milling Machine # 26660500, S/N 038974Bridgeport # E Shaping Attachment, S/N E-4306Carbide 1/2HP D.E.Grinder W/ Stand Model # 64169741MSC Floor Type “16-Speed” Drill Press, S/N 70602Phase II # 3 Arbor Press

Ingersoll Rand 7.5 HP Horizontal Tank “2-Stage” Air CompressorModel # T-30, S/N C934630

Campbell-Hausfeld 5 HP Vertical Tank “2-Stage” AirCompressor, S/N 021595L-838286

AirFlow Systems Dust & Mist Collector (New 2000)Air Quality Engineering Dual Intake Dust & Mist CollectorTooling & Equipment including: Yuasa 12” Tilting Rotary Table,

Magnetic Chucks, 5C Collet Indexers, CNC Type KnurlingTools, Carbide Inserts, Carbide Boring Bars, Carbide InsertCNC Lathe Tools, Boring Bars, Drills, Collets, Chucks, RingGages, Thread Gages, Suburban Wheel Dresser, DiamondWheels,etc.

Inspection Equipment including: Thread Gages, Ring Gages,Micrometers,Calipers, Microscope,Electronic Gages,Verniers,Pin Gauges,etc.

Misc. Plant Support including: 48” Lakewood Shop Fan, GlobalDigital Scale, Shop Carts,Shelving, Raw Material Rack, EVS30KVA Transformer,Work Benches, Canon "Imagerunner" #210-S Copy Machine, etc.

REGISTER AND BID AT WWW.THOMASAUCTION.COM

Bridgeport "Series I", 2 HPVertical Milling Machine

Deltronic 14" Optical Comparator # DV-114

Birmingham # YCL-1440GH "Gap Type" EngineLathe

MSC Surface Grinder # SGS-618

Bewo-Scotchman CutOff Saw # 275-H

COZEN #AH-1010JAY Metal Cutting Band Saw

Okuma "Cadet Big Bore" # LNC-8 CNC TurningCenter

Okuma # LB-15 CNC Turning Center

New 1996

MSC Milling and DrillingMachine # 9512914

Wrightline Tool StorageCabinet

Ingersoll Rand #T30 Air Compressor, 7.5 HP

1 of 2

3.15”SpindleBore

NewSpindle Drive

2012ExcellentCondition

Automatic Feed

New 2005

Late Model

Late Model

Like New

Well Tooled

New 2000

FORWARDING SERVICE REQUESTED

PRESORTED FIRSTCLASS MAILU.S. POSTAGE

PAIDPermit No. 80Milford, CT

THOMAS INDUSTRIES 2414 Boston Post RoadGuilford, CT 06437-2310

(203) 458-0709 • (203) 458-0727 Faxhttp://www.thomasauction.com

Under Management of:

OKUMA CNC TURNING CENTERS • MACHINE TOOLS • INSPECTION TOOLING • PLANT SUPPORT

ONLINE AUCTION By Order of

Blahut Machine Co.655 Plains Rd., Milford, Connecticut 06461

BIDDING CLOSES:Thursday, March 6th, 1:00 PM (ET)

INSPECTION DATE:Tuesday, March 4th, 9 AM to 4 PM

COMPLETE LOT CATALOG & PHOTOS AT WWW.THOMASAUCTION.COM

AUCTION INFORMATIONONLINE AUCTION

By Order of

Blahut Machine Co.655 Plains Rd.,

Milford, Connecticut 06461

Bidding Closes:Thursday, March 6th,

1:00 PM (ET)Inspection:

Tuesday, March 4th, 9 AM to 4 PM

Payment Due In Full: Friday, March 7th, 2014

Removal:Monday, March 10th - Friday, March 14th

Buyer’s Premium: 15%

Staggered Closing Times: Lots Have 60-Second Staggered Closing Times. AutoExtend Bidding: If a bid is submitted with lessthan 3-minutes remaining, the closing timefor that lot will be extended by 3-minutes.

Online Registration:Register and Bid at

www.thomasauction.comOnline Auction

Internet Bidding OnlyDisclaimer: Auctioneer is not responsible forerrors, omissions, additions or deletions. Itemsoffered may not necessarily be sold as describedand/or photographed. Buyers should verify allaspects of their potential purchases duringinspection as all items offered will be sold “as is,where is” with all faults. Please check with theauctioneer’s office for additions or deletions.

Payment Types: Certified Check or Wire Transfer

TECHNICAL INFORMATIONTom DeCosmo (413) 478-0030

PAYMENT INFORMATIONIrina Lekhmus (203) 458-0709 X108

ONSITE INFORMATIONJon Standish (203) 915-3430

Vectrax #GS-16V 3HP

VerticalMillingMachine

Deltronic 14" Optical Comparator # DV-114

THOMAS INDUSTRIES 2414 Boston Post RoadGuilford, CT 06437-2310

(203) 458-0709 • (203) 458-0727 Faxhttp://www.thomasauction.com

New 2005

Late Model