Which alignment angle is NOT adjustable? 1. Camber Camber 2.
Caster Caster 3. Steering Axis Inclination Steering Axis
Inclination
Slide 15
Front wheel toe is adjusted by using. 1. Shims Shims 2. Tie rod
sleeves Tie rod sleeves 3. Adjustment cams Adjustment cams
Slide 16
The three major components of the steering system are: Steering
column, steering gear and 1. Steering hanger beamSteering hanger
beam 2. Steering linkageSteering linkage 3. Steering toeSteering
toe
Slide 17
An adjusting sleeve is attached to the. 1. Tie rod Tie rod 2.
Idler arm Idler arm 3. Pitman arm Pitman arm
Slide 18
When the rear of the front tires are closer together than the
front, the steering has. 1. Bent parts Bent parts 2. Positive scrub
radius Positive scrub radius 3. Toe out Toe out
Slide 19
Unsprung weight is the weight of the. 1. Wheels, tires and
moving parts of the suspension. Wheels, tires and moving parts of
the suspension. 2. Vehicle, minus the wheels, tires and moving
parts of the suspension. Vehicle, minus the wheels, tires and
moving parts of the suspension. 3. Vehicle, without any
load/passengers. Vehicle, without any load/passengers.
Slide 20
McPherson strut suspensions use what type of springs? 1. Leaf
Leaf 2. Torsion bar Torsion bar 3. Coil Coil
Slide 21
Backward and forward tilt of the spindle support is referred to
as? 1. Camber Camber 2. Steering axis inclination Steering axis
inclination 3. Caster Caster
Slide 22
Inward or outward tilt of the front wheels is referred to as?
1. Camber Camber 2. Steering axis inclination Steering axis
inclination 3. Caster Caster