DRUM HANDLING EQUIPMENT

2

– for 200 litre steel bunghole drums, steel drums with a lid, rolling hoop drums and 220 litre plastic L-ring drums (the drums must be filled)

– sturdy construction for a long life – clear line of vision for the driver – standard galvanized gripping head – rubber guard(s) to prevent damage to drum(s) – gripping mechanism screwed to frame – incredible gripping strength – can be secured to prevent slipping – individual construction on request, e.g. stainless

steel for “ex”-zones in compliance with ”ATEX 95”

– similar to the RS/M but with wide drum rim edge

– for 200 litre steel bunghole drums, steel drums with a lid, 220 litre plastic L-ring drums and plastic double L-ring drums (the drums must be filled)

– individual construction on request, e.g. stainless steel for “ex”-zones in compliance with ”ATEX 95”

– available for 1 or 2 drums – opens automatically when set down – can be secured to prevent slipping

– adjustable drum rest to fit various sized drums – frame construction identical to Type RS-/M – standard galvanized gripping head – can be secured to prevent slipping

– sturdy construction for a long life – clear line of vision for the driver – standard galvanized gripping head; easy to change – rubber guard(s) to prevent damage to drum(s) – gripping mechanism screwed to frame – incredible gripping strength – can be secured to prevent slipping

DRUM LIFTERS Type RS/MSafe and fast handling of filled drums

DRUM LIFTERS Type RS/91

DRUM LIFTERS Type FKThe safe way to pick up and transport 200 litre steel bunghole drums, steel drums with a lid and rolling hoop drums

DRUM LIFTERS Type RS/D 91For transporting plastic drums with a lid and conical drums with a lid ranging from 110 to 220 litres (the drums must be filled)

DRUM LIFTERS Type RS 60The drum lifter to use for filled 60 litre steel bunghole drums

RS-II/M

RS-I/D 91

RS 60-I

FK-I

RS-I/91

Type RS-I/M RS-I/91 RS-II/91 RS-II/M RS-I/D 91 RS-II/D 91 RS 60-I RS 60-II FK-I FK-II

Max. no. of drums 1 x 200 l 1 x 200 l 2 x 200 l 2 x 200 l 1 x 200 l 2 x 200 l 1 x 60 l 2 x 60 l 1 x 200 l 2 x 200 l

Load capacity kg 800 800 1600 1600 800 1600 100 200 500 1000

Dimensions (lxwxh) mm 1290x585x930 1295x585x925 1185x960x925 1180x960x930 1290x585x810 1290x960x810 1050x405x560 1050x645x560 1350x620x145 1350x1230x145

Weight painted kg 94 94 139 139 94 139 32 45 67 99

Distance between forks mm 240 240 540 540 240 540 120 360 260 260

Max. cross section forks mm 150x65 150x65 150x65 150x65 150x65 150x65 140x60 140x60 150x65 150x65

RAL 2000RAL 5012

Nr.Nr.

4408-07-0000-14408-07-0000-3

4408-23-0000-1 4408-23-0000-3

4408-25-0000-14408-25-0000-3

4408-09-0000-14408-09-0000-3

4408-01-0000-1 4408-01-0000-3

4408-03-0000-1 4408-03-0000-3

4408-30-0000-1 4408-30-0000-3

4408-31-0000-1 4408-31-0000-3

4463-01-0000-14463-01-0000-3

4463-02-0000-1 4463-02-0000-3

Galvanized acc.to EN ISO 1461

Nr. 4408-07-0000-7 4408-23-0000-7 4408-25-0000-7 4408-09-0000-7 4408-01-0000-7 4408-03-0000-7 4408-30-0000-7 4408-31-0000-7 4463-01-0000-7 4463-02-0000-7

3

FLEX-HK

FD-KFD-HK

– max. cross section forks BxH=150x60 mm, distance between forks 650 mm – prism pick-up with tension belt and double worm gear – can be secured to prevent slipping – load capacity 300 kg, range of rotation: 360° – suitable for pick-up by a fork-lift truck, dumper or crane

– sturdy frame – self-braking gear box – drum cradle with eccentric lock – can be secured to prevent slipping – individual construction on request, e.g. stainless

steel for “ex”-zones in compliance with ”ATEX 95”

DRUM TIPPER Type FLEXA multi-functional unit - used for transporting, controlled emptying, turning over and setting down drums and other receptacles. Suitable for steel bunghole drums, steel drums with a lid, steel rolling hoop drums, plastic L-ring drums and plastic double L-ring drums ranging from 60 to 220 litres and for 120/240 litre waste bins

DRUM TIPPERS Type FDPick-up, transport and controlled emptying of 200 litre steel bunghole drums and steel drums with a lid

Type FLEX-HK FLEX-K

Tipping process with crank handle loop chain

Dimensions (lxwxh) mm 1000x1000x430 1000x1000x430

Weight painted kg 70 75

RAL 2000RAL 5012

Nr.Nr.

4440-05-0000-1 4440-05-0000-3

4440-06-0000-1 4440-06-0000-3

Galvanized acc.to EN ISO 1461

Nr. 4440-05-0000-7 4440-06-0000-7

Type FD-HK FD-K FD-SK

Tipping process with crank handle loop chain loop chain

Load capacity kg 360 360 360

Weight painted kg 70 76 79

RAL 2000RAL 5012

Nr.Nr.

4440-01-0000-1 4440-01-0000-3

4440-02-0000-1 4440-02-0000-3

4440-03-0000-1 4440-03-0000-3

Galvanized acc.to EN ISO 1461

Nr. 4440-01-0000-7 4440-02-0000-7 4440-03-0000-7

– ideal for transporting drums – suitable for charging drum shelves etc.

Type FW-I FW-II

Max. no. of drums 1 x 200 l 2 x 200 l

Load capacity kg 300 600

Dimensions (lxwxh) mm 1875x700x545 1875x1320x545

Weight painted kg 102 150

Distance between forks mm 270 600

max. cross section forks mm 170x75 170x75

RAL 2000RAL 5012

Nr.Nr.

4468-01-0000-14468-01-0000-3

4468-02-0000-1 4468-02-0000-3

Galvanized acc.to EN ISO 1461

Nr. 4468-01-0000-7 4468-02-0000-7

FW-I

DRUM TURNER Type FWTo upright 200 litre steel bunghole drums and rolling hoop drums from a horizontal position or to store them lying down

FW-II

– even drums weighting up to 250 kg can easily be lifted – the drum is raised and lowered in a controlled manner – the drum is gripped from the side; neither the base nor

the tension ring (in the case of a drum with lid) can be damaged

Type FHC

RAL 2000RAL 5012

Nr.Nr.

4478-01-0000-1 4478-01-0000-3

FHCDRUM HAND CAR Type FHCTransport unit for 200 l steel bunghole drums, steel drums with a lid

4

L/M 1300

FHR 600 K

L/E 1300

FRW-II

FRW-III

FRW-I

– suitable for charging retention basins, depots for hazardous materials, drum stacking pallets etc.

– with a towing bar – swivel castors Ø 180 mm, fixed castors Ø 80 mm – individual construction on request, e.g. stainless steel for

“ex”-zones in compliance with ”ATEX 95”

– Range of rotation in degree 270° – 2 swivel castors Ø 175 mm and 2 fixed castors Ø 200 mm made of solid

rubber, both swivel castors with brake – safe pick-up guaranteed; drum is held by the tension band at the front and spindle at the top – with crank handle and self-braking gear box – individual construction on request, e.g. stainless steel for “ex”-zones in compliance with ”ATEX 95”

– for steel bunghole drums, steel drums with a lid, steel rolling hoop drums, plastic L-ring drums, plastic double L-ring drums, plastic drums with a lid, rectangular drums and conical drums with a lid ranging from 110 to 220 litres also open drums

– with a brace to pick up 200 litre steel bunghole drums, steel drums with a lid and steel rolling hoop drums

– electric-hydraulic construction fitted with maintenance-free battery 12V/88Ah and charger for 230 V mains connection

– hydraulic construction with manual pump

Type FHR 600 G FHR 600 K

Width of pallet mm 800 800

Load capacity kg 300 300

Length x Width outside/inside x Height mm 990 x 1125/845 x 1320 990 x 1125/845 x 1320

Stroke height mm 600 600

Weight painted kg 109 109

RAL 2000 RAL 5012

Nr.Nr.

4419-09-0000-14419-09-0000-3

4419-08-0000-1 4419-08-0000-3

Galvanized acc.to EN ISO 1461

Nr. 4419-09-0000-7 4419-08-0000-7

Type L/M 600 L/M 1300 L/E 1300

Design hydraulic hydraulic electric-hydraulic

Load capacity kg 350 350 350

Stroke height mm 18 18 -

Total stroke - / Emptying height mm 450 / 600 1100 / 1300 1100 / 1300

Range of rotation degree 270 270 270

Weight painted kg 156 192 220

RAL 2000 RAL 5012

Nr.Nr.

4466-03-0000-14466-03-0000-3

4466-02-0000-14466-02-0000-3

4466-01-0000-1 4466-01-0000-3

Galvanized acc.to EN ISO 1461

Nr. 4466-03-0000-7 4466-02-0000-7 4466-01-0000-7

DRUM JACK ROLLER Type FHRPick up drums and transport them safely

LIFTOMAT Type LControlled emptying of steel bunghole drums, steel drums with a lid, steelrolling hoop drums, plastic L-ring drums, plastic double L-ring drums and plastic drums with a lid ranging from 110 to 220 litres

Type FHR 600 G

Type FHR 600 K

Type L/E

Type L/M

FHR 600 G

– construction made of steel sheeting – with 4 polyamide swivel castors Ø 100 mm, one swivel castor with brake

Type FRW-I FRW-II FRW-III

Ø inside mm 610 610 610

Dimensions (lxwxh) mm 660x620x160 625x620x210 700x620x1025

Load capacity kg 300 300 300

Weight painted kg 10 12 19

RAL 2000RAL 5012

Nr.Nr.

4455-05-0000-14455-05-0000-3

4455-06-0000-1 4455-06-0000-3

4455-07-0000-1 4455-07-0000-3

Galvanized acc.to EN ISO 1461

Nr. 4455-05-0000-7 4455-06-0000-7 4455-07-0000-7

DRUM DOLLEY Type FRWA simple and safe way to manoeuvre drums up to Ø 600 mm

5

– 3-point clamping system – automatic eccentric lock – ideal for charging over or salvage drums – adjustable positioning feature

– automatically secured

– automatically secured – automatically secured

– rubber guard to prevent damage to drum (can be replaced)

– locking lever to secure in open position

– operating lever to adjust tilting position

– suitable for 200 litre steel bunghole drums, 220 litre plastic L-ring drums and plastic double L-ring drums

– suitable for 200 litre steel bunghole drums

– 4-point clamping system – release activated by the guiding rod

Typ 3P 4P FKL FT/M FT/MK LGZ LG FWZ 60 FWZ 200

Load capacity kg 400 350 350 300 300 300 360 100 300

Dimensions (lxwxh) mm 875x675x335 768x200x419 320x780x900 425x1100x1350

Dimensions (ØxH) mm 610x255 610x270

Span range mm 270-680 560-600

Weight painted kg 17 10 10 5 5 5 10 21 48

RAL 2000 RAL 5012

Nr.Nr.

4441-01-0000-14441-01-0000-3

4463-16-0000-1 4463-16-0000-3

4454-01-0000-1 4454-01-0000-3

4429-01-0000-1 4429-01-0000-3

4429-02-0000-1 4429-02-0000-3

4463-10-0000-1 4463-10-0000-3

4443-01-0000-1 4443-01-0000-3

4463-18-0000-1 4463-18-0000-3

4463-17-0000-1 4463-17-0000-3

Galvanized acc.to EN ISO 1461

Nr. 4441-01-0000-7 4463-16-0000-7 4429-01-0000-7 4429-02-0000-7 4463-10-0000-7 4443-01-0000-7 4463-18-0000-7 4463-17-0000-7

DRUM GRIPPER Type 3PThe safe way to handle a variety of drums: steel bunghole drums, steeldrums with a lid, rolling hoop drums, plastic L-ring drums, plastic doubleL-ring drums and plastic drums with a lid ranging from 60 to 220 litres

DRUM CLAMP Type FKLFor lifting upright 200 litre steel bunghole drums

DRUM CLAW Type LGZFor lifting upright drums: 200 litre steel bunghole drums or steel drums with a lid

SCISSOR GRIPPER Type LGFor lifting upright drums: 60 or 200 litre steel bunghole drums

DRUM TURNING CLAW Type FWZFor lifting and transporting 60 litre or 200 litre steel bunghole drums and steel drums with a lid - in either a vertical or horizontal position

DRUM TRAVERSE Type FTFor lifting upright drums or for charging containers

DRUM GRIPPER Type 4PThe safe way to lift and transport 200 litre steel bunghole drums, steel drums with a lid, 220 litre plastic L-ring drums and plastic double L-ring drums

3P 4P

FKL

FT/MK FT/M

LGZ LG

FWZ

Type FT/MK

Type FT/M

6

01-2

013

W

e re

serv

e th

e rig

ht to

mak

e te

chni

cal a

ltera

tions

; err

ors

and

omis

sion

s ex

cept

ed.

DISPENSING AIDS FOR CANISTERS Type KAHThe easy and effortless way to dispense materialfrom canisters ranging from 5 - 60 litres

– construction made of steel sheeting, not assembled

– including wall-fittings

Type KAH-5 KAH-25 KAH-60

Canister sizes l 5 20/25 50/60

Dimensions (lxwxh) mm 360x270x520 520x375x780 520x470x820

Weight painted kg 5 6 8

RAL 2000RAL 3000 RAL 5012RAL 6011RAL 7005

Nr.Nr.Nr.Nr.Nr.

4440-18-0000-14440-18-0000-2 4440-18-0000-34440-18-0000-44440-18-0000-5

4440-20-0000-14440-20-0000-24440-20-0000-34440-20-0000-44440-20-0000-5

4440-22-0000-1 4440-22-0000-2 4440-22-0000-34440-22-0000-44440-22-0000-5

Galvanized acc.to EN ISO 1461

Nr. 4440-18-0000-7 4440-20-0000-7 4440-22-0000-7

KAH-5 fitted to the wall

Type KAH-25 with spill trayfor small cans Type KGW-2 (accessories on request)

Order Form Please send us the completed order form per fax or call us.

r We hereby order as follows r Please contact us

Company name

Contact person

Adress

Adress

Phone, Fax

Email

Date/signature

Art. No. Number of articles Price € / per piece Total amount €