02

05

08

11

14

17

01

04

07

10

13

16

19 20

03

06

09

12

15

18

21

Automation Studio is the ultimate integrated auto­mation software for every industry. When it comes to efficient and sustainable software engineering for machines and systems, Automation Studio offers the power and versatility to optimize every hori­zontal and vertical aspect of your system and the openness to secure its value long into the future.

The Automation Studio development system in-tegrates every aspect of automation, providing uniform solutions for open and closed loop con-trol, motion control and safety technology as well as hardware and software for operating and monitoring entire systems from the highest su-pervisory level down to individual sensors and actuators. The features it provides and the sys-tems it is used to create are suited for all indus-tries, support compliance with relevant standards and are certified by the respective industrial gov-erning bodies.

Technology packages reduce development timeA selection of technology packages provides pre- programmed open loop, closed loop and motion control technology as well as visualization solu-tions for typical industry-specific system compo-nents, making it easy for software developers to create solutions optimized for particular industries.This saves the time and effort that would otherwise be spent on programming, testing and certification.

Modularity increases software qualityThrough its commitment to separate software de-velopment tasks and intelligent modularization, Automation Studio 4 helps you reach your devel-opment goals quickly while maintaining quality throughout every aspect of your project.

One tool for every industry

Integrated automationGlobal presenceSolid partnership

MM

-FO-

ASW

-IA-

EN-0

4©

02/

2019

by

B&R.

All

right

s re

serv

ed w

orld

wid

e.

B&RIndustrial Automation GmbH

B&R Strasse 15142 Eggelsberg, Austria

Your local contactwww.br-automation.com/contact

office@br-automation.comwww.br-automation.com

t +43 7748 6586-0f +43 7748 6586-26

Integrated automation

Integrated automation solution for every industry:

01 Packaging

02 Infrastructure

03 Metal

04 Handling & Robotics

05 Print

06 Wind power

07 Maritime & Offshore

08 Tobacco

09 Packaging

10 Environment & Recycling

11 Chemical & Pharmaceutical

12 Food & Beverage

13 Semiconductor

14 Oil & Gas

15 Measurement & Testing technology

16 Energy

17 Wood

18 Medical engineering

19 Plastics

20 Textile

21 Automotive

TECHNOLOGYreACTION

< X67 I/O < Open for all fieldbus systems < Seamless integration < Excellent EMC properties < Diagnostics via PLC program and web

interface < No-risk hardware replacement due to

centralized management of firmware and configurations

< Simple cabling

IP67 I/O system

< Integrated closed-loop control and signal processing

< Hydraulics, temperature, winders, printing, wind and process

< Profile generators, controllers, system identification, autotuning

< Virtual sensors, encoderless control < Sample solutions and simulation

models < Extensive selection of libraries for

easily solving complex tasks < Model Predictive Control (MPC),

Advanced Process Control (APC)

Technology Solutions

< Power Panel T-Series < Portrait and landscape < 4.3" to 10.1" < Widescreen and 4:3 < Integrated VNC terminal and web client

< Power Panel C-Series < Control and HMI in a single device < 5.7” to 10.1” < Widescreen and 4:3 < Onboard POWERLINK and X2X < Can be expanded with keypad modules

Power Panels

< Automation PC 910 / Panel PC 900 < Powerful Intel Core i3|i5|i7 processors < Fanless operation < Windows 7, Windows 8, Windows

Embedded, Linux, real-time < Uncompromising quality for

operation over many years < Integrated machine visualization,

open for SCADA and custom-made visualizations

< Open communication (FTP, VNC, OPC, web server)

< Direct fieldbus connection

Box PCs / Panel PCs

< Automation Panel 900 < Widescreen formats from 7" WVGA

to 24" Full HD < 4:3 formats from 12.1" XGA to 19" SXGA < Projected capacitive multi-touch

and analog resistive single-touch < Hygienic design < Slim design, swing arm and cabinet

mounting < Remote operation up to 100 m with

SDL3 < Protection up to IP69K

Automation Panels

< ACOPOS / ACOPOSmulti / ACOPOSmicro < Power range from 500 W to 120 kW < Regeneration-capable, energy saving < Integrated drive sizing < Preconfigured modules for complex

functions < No-risk hardware replacement due to

centralized management of firmware and configurations

< Easy programming with standardized PLCopen function blocks

< Maximum dynamics and precision with a perfectly orchestrated complete system

IP20 motion control

< ACOPOSmotor / ACOPOSremote < Seamless integration in the

ACOPOSmulti drive system < Flexible topology (tree or daisy chain) < Integrated safety technology and

SafeMOTION < High continuous power up to 4 kW < Integrated connections for I/O nodes < Integrated drive sizing < Easy programming with standardized

PLCopen function blocks

IP65 motion control

< Generic Motion Control < CNC functions for all technologies < Ready-to-use robotics solutions < Any kinematic transformations < Motion profiles optimized for power

consumption and timing < Support for servos, steppers and

hydraulics < Interpretation of NC dialects < Optimal synchronization of PLC and

NC on a single platform

CNC / Robotics

< Power range up to 140 kW < Synchronous motors, stepper motors,

direct drives < Direct gearbox mounting < Integrated diagnostics down to the

motor < Integrated sizing with Speed Torque

Chart < Additional graphic controllers

optimization in the Servo Loop Optimizer

< Embedded parameter chip

Motors / Gears

< X20 controller < Easy programming in IEC 61131-3,

CFC, ANSI C, C++ and PLCopen languages

< Open fieldbus options (POWERLINK, CANopen, DeviceNet, PROFIBUS, PROFINET, etc.)

< Intel Atom performance < Fanless < Redundancy with standard hardware < Integrated diagnostics using the

System Diagnostics Manager < Integrated CNC and robotics

Scalable PLC platform

< reACTION TECHNOLOGY < 1 µs response time < Cost-effective through use of

standard hardware < Programming with Function Block

Diagram in accordance with IEC 61131 < Significant reduction of CPU load < Digital and analog signal

preprocessing < Comprehensive diagnostics and

simulation < Centralized program management < Extensive function library

Ultrafast automation

< X20 I/O < Open for all fieldbus systems < Removable terminal blocks < Hot-pluggable < Unequaled component density:

16 channels in just 12.5 mm < Integrated diagnostics using the

System Diagnostics Manager < No-risk hardware replacement due to

centralized management of firmware and configurations

Modular I/O system

< SafeLOGIC < Safety in accordance with CAT 4 /

PL e / SIL 3 < Certified PLCopen function blocks < Virtual wiring

< X20 SafeIO / X67 SafeIO < Use of I/O data in both standard

and safe applications < No-risk hardware replacement without

programming with centralized data management

< Fully integrated in the B&R system < Next-level usability for developer and user < Synchronization with µs precision < Complete portfolio: cameras, lenses,

lighting and software < Lighting control with µs precision < High-performance LEDs (immune to

extraneous light) < Automatic adaptation to every situation

Safe control platform Vision

< SafeMOTION < Fastest response times (7.2 ms) < 15 safe motion control functions

(STO, STO1, SBC, SOS, SS1, SS2, SLS, SDI, SLI, SMS, SLP, SMP, Safe Homing, SBT, SafeROBOTICS)

< Safety in accordance with CAT 4 / PL e / SIL 3

< Network-based safety technology < Safe parameter transfers with

SafeLOGIC

< ACOPOStrak < Absolute design freedom < High-speed diverters < Hot-swappable shuttles < Highly dynamic, maximum speed >4 m/s < Safe human-track collaboration < Combinable with conventional

conveyors

< SuperTrak < High payload < Easy integration < Scalable system with small footprint

Safe motion control Track Systems

01 Project management

05 Integrated Safety technology

08 Open communication

02 Programming

Automation Studio mapp Technology Open at every level

03 Diagnostics & Remotemaintenance

04 Drives & Motion control

06 Operation & Monitoring

07 Control< Seamlessly integrated

IEC 61131, C, C++, CFC PLCopen

< OPC UA over TSN Uniform communication solution based 100% on open standards

< openSAFETY Fieldbus-independent safety protocol

< Internet Web server, HTTP client, remote diagnostic system

< ERP / MES / SCADA Direct connection to super- visory control level, OPC UA

< E­CAD systems Round-trip engineering with EPLAN Electric P8

< POWERLINK Open Ethernet-based real-time protocol

< Fieldbus systems Modbus CANopen DeviceNet Ethernet/IP PROFIBUS, PROFINET, FDT/DTM

< Simulation MATLAB, MapleSim industrialPhysics

Parallel and modular development

Automation Studio provides full support for both parallel and modular development, reducing the total development time of machines and systems in the process.

Schneller am Ziel

Ideal

Faster to market!

Para

llel &

m

odul

ar

Para

llel

Plan

ned

proj

ect e

nd

Proj

ect e

nd in

con

vent

iona

l dev

elop

men

t

Realistic

Parallel

Parallel& modular

Mechanics Electronics Software

C/C++

CNC

61131-3

Yourtechnology

Mach

ine software

Machine software

Implement any combination of mapp Technology and your own process software. How much B&R know­how you choose to integrate in the form of mapp components is en­tirely up to you.

mapp Technology comes in the form of plug-ins for Automa-tion Studio – B&R's integrated environment for engineering, diagnostics and maintenance. All IEC 61131 programming languages as well as C and C++ are supported.

Highlights

< Simple as smartphone apps< Automatic communication between mapps< Manage machine variants with ease< Integrate with existing know-how as needed

OVER