2
ONE PUMP (#2000454) Product Number: 2000454 Pump Type: Bottom Loading, High Temperature Actuation: Float Activated, Fully Automatic Casing Material: FRP Float: Coated Syntactic Outer Diameter: 3.5 in. Length: 42.75 in. Weight: 16.8 lbs. Volume/Stroke: .32-.37 gal. Actuation Point: 27.4 in. from bottom Max Flow Rate: 12.5 GPM (See Flow Rate) Air Pressure: 5-250 psi Operating Temperature: up to 250° Air Consumption: 0-5 SCFM pH Range: 2-13 Minimum Liquid Density: .79 Max Depth: 425 ſt. SPECIFICATIONS Major Metallic Parts: 316 SS, 17/4 SS & NdFeB Internal Non-Metallic parts: PEEK, PTFE (Teflon), & FKM (Viton) MATERIALS e ONE Pump is built in the USA & protected by a 5-year warranty. WARRANTY (704) 786-8158 10308 Bailey Rd. Suite 418 Cornelius, NC 28031 [email protected] https://pumponellc.com Call PUMP ONE for site specific recommendations. 42.75 in. LENGTH 3.5 in. WIDTH 27.4 in. ACTUATION POINT * YEAR WARRANTY 5 FRP CASING 32.25 in. LENGTH Gas Extraction Wells Condensate Sumps Vertical Extraction Wells Recovery Wells at Remediation Sites APPLICATIONS

ONE PUMP (#2000454)

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

ONE PUMP (#2000454)

Product Number: 2000454Pump Type: Bottom Loading, High TemperatureActuation: Float Activated, Fully AutomaticCasing Material: FRPFloat: Coated SyntacticOuter Diameter: 3.5 in.Length: 42.75 in.Weight: 16.8 lbs.Volume/Stroke: .32-.37 gal.Actuation Point: 27.4 in. from bottomMax Flow Rate: 12.5 GPM (See Flow Rate)Air Pressure: 5-250 psiOperating Temperature: up to 250°Air Consumption: 0-5 SCFMpH Range: 2-13Minimum Liquid Density: .79Max Depth: 425 ft.

SPECIFICATIONS

Major Metallic Parts: 316 SS, 17/4 SS & NdFeBInternal Non-Metallic parts: PEEK, PTFE (Teflon), & FKM (Viton)

MATERIALS

The ONE Pump is built in the USA & protected by a 5-year warranty.

WARRANTY

(704) 786-8158 10308 Bailey Rd. Suite 418 Cornelius, NC 28031

[email protected]://pumponellc.com

Call PUMP ONE for site specific recommendations.

42.7

5 in

. LEN

GTH

3.5 in.WIDTH

27.4

in. A

CTU

ATI

ON

PO

INT

*

YEAR

WARRANTY5

FRP

CA

SIN

G 3

2.25

in. L

ENG

TH

Gas Extraction WellsCondensate SumpsVertical Extraction WellsRecovery Wells at Remediation Sites

APPLICATIONS

AIR REGULATOR KIT (#2000068)

FAST FITTING KIT (#2000476)

6 in. WELL SEAL (#2000336)

8 in. WELL SEAL(#2000335)

AIR INTAKE MANIFOLD (#2000030)

LEACHATE DISCHARGE MANIFOLD (#2000032)

LEACHATE 2-WAY DISCHARGE MANIFOLD

(#2000153)

ACCESSORIES PUMP CURVES