On the road to success. Join us and discover the world of ...€¦ · E_D_Image_Prospekt_Druck.indd 7 16.06.2008 14:30:29 Uhr. E_D_Image_Prospekt_Druck.indd 8 16.06.2008 14:30:31

On the road to success.Join us and discover the world of metal forming technology.

E_D_Image_Prospekt_Druck.indd 1 16.06.2008 14:30:06 Uhr


We set our sail as the wind blows.

He who starts on a discovery tour needs a reliable pilot who knows how to safely guide a ship across the oceans.

Together with our customers we, the specialist for sophisticated forming, take a tour around their businesses. There is a lot to discover. For exam-ple: how the rollbending method can simplify production flow and thereby save a considerable amount of time and money.

But aside from our urge for discovery, we focus on precision and reliability. With our comprehensive product range of proven spring pins, tension bushes, and coiled spring pins we offer to our customers all they need for a secure production. You need us, we are there. Whatever the route:We find the most economical variant.


Discovered 1983 The Compression Limiter - the ideal tool for hole reinforcement in plastic components. Replaces perfectly all turned parts and tubular sections.

Discovered 1986 The Anti-Vibration Cage- guarantees low cost in the styling of silent-blocks in the chassis sector. An efficient replacement for moulding products.

Discovered 1998 The Rolled Receiving Bush- the economical alternative to tubular sections. Used in the chassis sector.

Discovered 1946 The Spring Pin - the optimum solution for joining technique. Excels by low cost and multiple fieldsof application.

Discovered 2006 The Crimped Bush- Perfection in its most economical form. Excellent alternative to cold extrusion and moulding products.


A discovery tour to success.

It starts with that passion, which turns a discovery tour into a success story.

Our tour started in 1946, and since then we have assisted many businesses in improving and optimi-zing their production processes. Heads are spinning until the vital spark appears. Should time be running out, we throw in reinforcements. To our customers‘ benefit we always want to know more than others did: about their products, their processes, their objectives. Only thus can we be their pilot, guiding them to a safe haven.

What we are looking for

... all production flows and processes which can be made more efficient and cost-saving with our rollbending technology. We offer the perfect alternative for all cylindrical forms made of pipe sections, turned parts, for moulding and cold extrusion technique and other methods.


Rolled Bushing

Form

U-Form

Board

Steering the course.

Many ways find the target.The right course defines success.

Our course is the rollbending method. To get our customers right on target we consistently developed and refined this method. Many currently used turned parts, mouldings, and tubular sections can be substituted by more flexible and price-competitive means. Many compa-nies are astonished to find out that a con-siderable proportion of their production is suited for the alternative: rollbending technology.


We find the course through shallow waters.

Together with our customers our experts fathom the possibilities for improvement, and how to implement them. From the first counseling ses-sion to series production we are your dependable helmsman. Continuous quality assurance makes for a safe course: Do materials meet all require-ments, are working steps perfectly coordinated, is the final product okay? We leave nothing to chance.

Full speed ahead.

What comes aboard is proven and of best quality.

Our production is situated close to large cold rolling mills. This advantage of location pays off when selection of materials is concerned. We ascertain the quality of the used material on site. Our scope of service is rounded off by a network of competetent part-ners and suppliers. From the know-how of the crew to the equipment: all from one source.



A reliable partner on every route.

For the daily routine we are always sufficiently stocked.

The diversity of our product range combined with high availability assure a degree of planning relia-bilty which others barely dream of. Our customers may take a deep breath in the certainty of successful procedures. And should the running get tight, we deliver an extra effort. That‘s what reliable partners are for.

Navigation needs absolute precision.

Just the same in forming technology, where millimeters decide between failure and success. Whether spring pins, tension bushes, or coiled spring pins: Designers and engineers will find what they need in our compre-hensive product range. We also manufacture purpose-built compo-nents to customer specifications. As we all know, it makes a difference if the route navigates the polar or the south sea.

Logistics - navigation supreme.

Our 24/7 delivery service assures that our customers are always one step ahead of the competition. We deliver just in time. No matter if it is about individual packing regulations, special company labels, automated packing lines, or container manage-ment: Businesses can be at ease with us.


CoordinatesJörg Vogelsang Umformtechnologie Germany

Number of Customers: 2,000

Number of Products/Variants: 5,000

Shop Area: 55,000 m2

Production: > 1 billion Parts/Year

Material Usage: 15,000 t

Industrial Certificates: ISO TS 16949 ISO TS 14001

Automotive Turnover: 80 %

No expedition without a good crew.

Our team: internationally proven and seasoned by all kinds of weather.

Presently ca. 150 seasoned experts belong to our crew in Germany. Especially when the going gets rough, their experience pays off. Every move fits. We know that only teamwork will make our day, when everybody can depend on his work-mates. We are no high-fliers, we remain down-to-earth. This attitude is exactly why we carefully listen to you, and act in your interest. That the journey will end just where our customers wanted to be.

CzechRepublic 50

Germany150

France100

USA50

Number of Staff

Jörg Vogelsang Umformtechnologie 33 Mio. €

Mecanindus 14 Mio. €

Vogelsang Corporation8 Mio. €

External Sales

Jörg Vogelsang Umformtechnologie

Mecanindus European Parts Company

Vogelsang Corporation



Jörg Vogelsang GmbH & Co. KG

Spannstiftstraße 258119 Hagen/Germany

fon: +49 2334 957-0fax: +49 2334 957-888

[email protected]


Documents

On the road to success. Join us and discover the world of ...€¦ · E_D_Image_Prospekt_Druck.indd 7 16.06.2008 14:30:29 Uhr. E_D_Image_Prospekt_Druck.indd 8 16.06.2008 14:30:31