PLEASE VISIT OUR WEBSITE FOR UPCOMING AUCTION BROCHURES YOU MAY NOT HAVE RECEIVEDwww.ashmancompany.com

CNC MACHINE AND FABRICATION SHOP2010 AKIRA SEIKI SV760 CNC Vertical Machining Center, 2002 VIPER V-950P CNC Vertical Machining

Center, 2008 AMADA LASMAC LC1212 IV NT CNC Laser Contour Machine, 2002 AMADA Vipros 255 CNC Turret Punch Press, (2) 2002 and 2001 AMADA RG-80 CNC Press Brakes, DIACRO & CHICAGO 48" to 72"

Press Brakes, (3) PEMSERTER Series-4 Hardware Insertion Presses, LOSHBOUGH Stamping Press, PEXTO 52" Power Shear, TIMESAVERS 2-Head 36" Belt Grainer, EUROMAE Power Corner Notcher,

HARDINGE Chucker, Welders & Spot Welders, Saws, Grinders, Drill Presses, AMADA Brake Dies, AMADA Punch Tooling, Machine Tooling, Inspection, Forklift, Material Handling & Office

Live On-Line Bidding Provided by

ON THE PREMISES OF

UNITED PRECISION1209 SAN LUIS OBISPO AVENUE • HAYWARD, CA. 94544

THURSDAY, DECEMBER 6 AT 11:00 A.M.

Ryan Lloyd Ashman, Auctioneer1415 Oakland Blvd., #200

Walnut Creek, CA 94596-4349No. Ca. (925) 256-8111

FAX (925) 256-8436So. Ca. (949) 752-7207

www.ashmancompany.comCA Bond 0447212

Industrial • Commercial • Auctioneers

PREVIEW: Morning of Sale, 9:00 A.M. to 11:00 A.M.

2002

2010

2008

2000

2000 WATTS

INSTALLED NEW 2009

CNC MILLS2010 AKIRA SEIKI SV760 CNC Vertical Machining Center, s/n SV07070001, w/Akira Seiki Mi645 CNC controls, 28-station ATC, Cat-40 taper spindle, 14,000 RPM spindle, 25 hp. motor, X=30", Y=17.125", Z=20.47", hand wheel, 15" x 36" table, Betake chip conveyor, coolant.

2002 VIPER V-950 Mdl. VMC-950P CNC Vertical Machining Center, s/n 003200, w/MWS-842 CNC controls, 20-station ATC, Cat-40 taper spindle, Habor oil cooler, 18-1/2" x 47-1/4" table, chip auger, coolant.

CNC LASER2008 AMADA Lasmac LC1212 IV NT Mdl. LC1212A4NT 2kW CNC Laser Contour Machine, s/n 45441624, w/Amada touch screen controls, Fanuc Laser C2000 Type A04B-0813-B321 2,000 watt laser unit – 2,700 watt peak, s/n L08720292, simultaneous X, Y, Z and B axes, travels X=50", Y=50", Z-11.81", 60" x 122-3/4" ball-top table, Orion Digieco Mdl. RKED7500A-VA-UU chilling unit, s/n 809002, Amada Mdl. QSQ180W-11CA1 dual air dryer, s/n 808013, Donaldson Torit Downflo Mdl. ADF4 4-Element dust collector, s/n 02745118, 8,265 metered hours. Installed New 2009.

CNC TURRET PUNCH2002 AMADA Vipros 255 Mdl. VIPROS202050 20-Ton 31-Station CNC Turret Punch Press, s/n AVP55359, w/Fanuc 18-P CNC controls, 31-station turret, (3) indexable stations, 100" x 100" brush-top table, floppy disc, pendant controls, Parker HPU6939B hydraulic unit, s/n J12M112, Technotrans Mdl. EX3.0 cooling unit, s/n 46331402.

CNC PRESS BRAKES2001 AMADA RG-8024 Mdl. RG-8024LD 80-Ton X 8' CNC Press Brake, s/n 80240123, w/Amada LD CNC controls and back gaging, 94.5" table length, 98.6" max. bend length, 80.7" between uprights, 15.75" throat depth, 3.94" stroke, 14.57" open height, pendant and foot controls, Amada Quick-Lock tool holders.

2000 AMADA RG-80 80-Ton X 8' CNC Press Brake, s/n 812000, w/Amada NC9-EX II CNC controls and back gaging, 94.6" table length, 98.7" max. bend length, 80.8" between uprights, 15.76" throat depth, 3.94" stroke, 14.58" open height, pendant and foot controls.

PRESS BRAKESDIACRO Hydra Power No.14-72 14-Ton X 72" Hydraulic Press Brake, s/n JG-1295, w/dial back gage, 72" table length, 9" throat depth, 62" between uprights, foot control.

DIACRO Hydra Power Mdl. 14-48-2 14-Ton X 48" Hydraulic Press Brake, s/n 6820176261, w/48" bed length, 6-1/2" throat depth, 36" between uprights, manual backgage, foot control.

CHICAGO Mdl. 131SP 11-Ton (18GA) X 48" Press Brake, s/n LW-10128, w/48" bed length, 6" throat depth, 31" between uprights, manual backgage, adjustable bed elevation, foot control.

INSERTION PRESSESPEMSERTER Series 4 Mdl. J 6-Ton X 18" Hardware Insertion Press, s/n J4-2633, w/18" throat, stand, foot control, tooling.

PEMSERTER Series 4 Mdl. J 6-Ton X 18" Hardware Insertion Press, s/n H4-1668, w/18" throat, stand, foot control, tooling.

PEMSERTER Series LT/4 6-Ton X 10" Hardware Insertion Press, s/n LT4-0424, w/10" throat, stand, foot control, tooling.

SUPPORT FABRICATIONPEXTO Mdl. 10-U4 10GA Cap. X 52" Power Shear, s/n M-5011, w/18" squaring arm, foot control.

LOSHBOUGH JORDAN No.3 Stamping Press, s/n 1168, w/12-1/2" x 21-1/4" bolster area, 6-3/4" x 8-1/2" ram area, palm buttons.

2008 EUROMAE Mdl. FA200/6 7-7/8" X 7-7/8" Hydraulic Corner Notcher, s/n F6800567890, w/work stops, foot control.

2007 IMPORT Mdl. 130-4501 20GA Cap. X 24" Slip Roll, s/n 0703013, w/2" rolls.

SUPPORT MACHINERYTIMESAVERS Series 2200 Mdl. 2221-23-00 2-Head 36" Belt Grainer, s/n 31355, w/Timesavers digital programmable controls, (2) 36" heads, 36" belt feed drive.

2008 TIMESAVERS Mdl. WDC-7 Water Filtered Dust Collector, s/n 31454.

AEM Mdl. NBS-250 24" Belt Grainer, s/n MO-2689, w/24" belt feed.

HARDINGE Mdl. HC Hand Chucker, s/n HC-3745N, w/125–3,000 RPM, 8-station turret, 5C collet closer, power feeds.

WILTON Mdl. F225 9" Miter Cold Saw, s/n 0802728, w/manual clamping, coolant.

2002

Live On-Line Bidding Provided by

2001

KBC Mdl. 360 14" Vertical Band Saw, s/n NA, w/blade welder, dial speed change, 20" x 22" miter table.

DAYTON Mdl. 4YG30A 7" X 12" Horizontal Band Saw, w/manual clamping, work stop, coolant.

KBC Mdl. BAH-127 7" x 12" Horizontal Band Saw, s/n 04085706, w/(4) speeds, manual clamping, work stop, coolant.

BOYAR SCHULTZ Challenger H618 6" X 18" Surface Grinder, s/n C-2384, w/magnetic chuck.

COMPAIRE Hydrovane 068CK08-208 15 Hp. Rotary Vane Air Compressor, s/n 068-000427-0003.

CHICAGO PNEUMATICS Mdl. CPX80 Refrigerated Air Dryer.

(2) 80-Gallon Air Tanks.

BURR KING Mdl. 960 4" Pedestal Belt Sander, w/3 hp. motor.

RYOBI 18" Pedestal Sander.

SOLBERGA Type SENr4 Geared Head Pedestal Drill Press, s/n 1532, w/150–1,680 RPM, (6) speeds, 18" x 28" table.

FLEX-ARM Pneumatic Straight Hole Tapper, s/n 015264.

MR. DEBURR Media Tumbler.

(2) RYOBI 8" Pedestal Grinders.

RYOBI Mdl. DP121L Bench Model Drill Press, w/digital speed indicator, laser spotter, lever speed change.

(2) RYOBI 10" Table Model Drill Presses.

HITACHI Mdl. B13F Table Model Drill Press.

(3) DAYTON and RYOBI 4" Belt/6" Disc Sanders.

WELDINGMILLER Syncrowave 350LX CC-AC/DC Squarewave Power Source, s/n LA300111.

MILLER Millermatic 211 120/230V Wire Welder, s/n LK201247N, auto-set w/MVP, cart.

MILLER Millermatic 210 Wire Welder, s/n LG210128B, w/Spoolmate 3035 MIG and spool gun.

MILLER Diversion 165 AC/DC Aluminum/Steel Welding Power Source, s/n MA120251J.

JANDA Type R5C-24B 50kVA X 24" Spot Welder, s/n R-3279, w/Janda-600V welding controller, foot control.

LORS Mdl. 130AP 30kVA X 18" Spot Welder, s/n 1177/2237, w/pneumatic ram, foot control.

50" X 70" Welding Table.

48" X 70" Welding Table.

Welding Acces., Wire, Rod, and Curtains.

Welding Clamps, C-Clamps.

TOOLING(400) AMADA Press Brake Tooling, w/racks.

(100) AMADA Press Brake Tooling, w/A-frame racks.

(200) Misc. Press Brake Tooling to 12-1/2' Length, w/racks.

(24) AMADA Quick-Lock Tooling Holders.

AMADA 8-Drawer Punch Tooling Cabinet, w/(210) Amada punch tooling.

AMADA 8-Drawer Punch Tooling Cabinet, w/(175) Amada punch tooling.

MATE Punch Tapping Head.

AMADA Z-Tooling Punch Tapping Head.

AMADA Z-Tooling Impression Stamping Head.

Dimpling Punch Head.

(6) KURT 6" Angle-Lock Vises.

(100) CAT-40 Taper Tooling.

(200) Flex Collets.

(40) 5C Collets.

4-Ton PORTA-POWER Set.

Pneumatic Straight Shaft Grinder, Orbital and Pad Sanders, Disc Sanders.

Pneumatic Riveters and Hardware Inserters.

Large Quantity of Insertion Hardware.

Shop Vacs.

INSPECTION24" Dial Height Gage; AB Gage Block Set; 60" Vernier Caliper; FOWLER 24" Digital Caliper; BROWN & SHARP 37" Vernier Caliper; YUASA 24" Vernier Caliper; 12" Dial Caliper; STARRETT Pin Gage Sets, .501–.625, .251–.500, .061–.250, .011–.060; VERMONT Pin Gage Set, .061–.250; 36" X 42" X 6" Granite Surface Plate, w/granite leg stand; 30" X 36" X 6" Granite Surface Plate, w/roller stand; 18" X 24" X 4" Granite Surface Plate, w/stand; 18" X 24" X 3-1/2" Granite Surface Plate, w/roller stand; STANDRIDGE 6" X 6" X 6" Granite Step Block.

MATERIAL & HANDLINGYALE Mdl. GLC040ADJUAE083 4000-Lb. Cap. LPG Forklift, s/n Y436849, w/3-stage mast, sideshift, cushion tires.

Pallet Jack.

(2) Cantilever Sheet Stock Racks.

(5) Sections of Pallet Racking.

Steel Racks and Shelving.

Sheet Stock and Shop Carts.

Banding Cart, w/tools.

Flammables Cabinet; Spill Containers; (2) U-LINE Mdl. H-86-034 16" Bar Sealers; Shipping Equipment and Supplies.

PLEASE VISIT OUR WEBSITE FOR UPCOMING AUCTION BROCHURES

YOU MAY NOT HAVE RECEIVEDwww.ashmancompany.com

52"

2 HEADS

QS-0015179

Industrial • Commercial • Auctioneers CA Bond 0447212

Ryan Lloyd Ashman, Auctioneer1415 Oakland Blvd., #200, Walnut Creek, CA 94596-4349

No. Ca. (925) 256-8111 • FAX (925) 256-8436 • So. Ca. (949) 752-7207www.ashmancompany.com •

FIRST CLASS MAIL

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

Scan With SmartPhone

THURSDAY, DECEMBER 6 AT 11:00 A.M.

ON THE PREMISES OF

UNITED PRECISION

CNC MACHINE AND FABRICATION SHOP

Payment: Cash, cashier’s check, wire transfer or business check accompanied by a bank letter. FULL SETTLEMENT TO BE MADE DAY OF SALE. All sales are final and are payable at the conclu-sion of the sale. A buyer’s premium and sales tax will be charged on all purchases.Buyer’s Premium: A 12% buyer’s premium will apply to all onsite purchases. A 15% buyer’s premium will apply to all online purchases through Bidspotter.Removal of Purchases: Cost, responsibility, and risk of removal of purchases remain with the purchaser. It is the purchaser’s responsibility to restore/repair all real or personal property that is altered or damaged as a result of the removal. Purchases must be removed from the premises in the time allocated as announced and/or posted by the Auctioneers. Ashman Company re-serves the right to charge the purchaser for the costs of storage and/or disposal beyond the re-moval period. Items not picked up in the time allocated will be considered abandoned. NO purchases may be removed until after the conclusion of the sale. No claims of any kind shall be allowed for any item not removed or after an item has been removed by the purchaser.Disclaimer of Warranties: Everything will be sold “AS IS,” “WHERE IS,” “AS AVAILABLE,” “WITH FAULTS,” with no representations, expressed or implied. Ashman Company, as agent and seller, expressly disclaims any warranty as to fitness or usability of all the assets, and the buyer expressly waives any claims in respect to any possible future use of any asset purchased for any purpose whatsoever.Ashman Company, seller and/or advertising agents will not be held responsible for advertising in-accuracies or discrepancies. Prospective buyers are advised that Ashman Company does not guar-antee the accuracy of description or condition of the subject property. Prospective buyers are urged to inspect all items, deductions will not be allowed on damaged goods since everything is sold “as is” and without recourse. No advice or information, whether written or verbal, obtained by a prospective buyer from Ashman Company shall create any warranties or responsibility for items purchased. The purchaser hereby assumes and does agree to indemnify and hold Ashman Com-pany and seller harmless from any future claim which shall pertain to the fitness or use of the item being purchased.Limitations of Liability: For any reason whatsoever, an item purchased cannot be delivered, the buyer waives liability on the part of Ashman Company and further agrees that any obligation of said item is limited to the bid and paid for price of item. Persons attending the auction preview, sale, or removal assume all risks of damage of or loss to person and property and specifically release and indemnify Ashman Company and sellers from liability. Ashman Company and/or seller shall not be liable by reason of any defect in or condition of the premises in which the sale is held.Vehicles: Ashman Company is not responsible for any penalties on past-due registrations or smog compliance certificates. It is the bidder’s sole responsibility to check all vehicles for plates/tags, smog devices, and/or any defects.

TERMS

PLEASE VISIT OUR WEBSITE FOR UPCOMING AUCTION BROCHURES

YOU MAY NOT HAVE RECEIVEDwww.ashmancompany.com

A 12% BUYER’S PREMIUM WILL APPLY

A 15% BUYER’S PREMIUM THROUGH BIDSPOTTER

WILL APPLY

DIRECTIONS FROM OAKLAND: Take I-80 south and exit on Whipple Road and turn right. Turn left on Medallion Drive, then left on San Luis Obispo Avenue. Look for “Auction Today” signs.

PREVIEW: Morning of the sale from 9:00 A.M. to 11:00 A.M.

Auctioneer’s Note: The auctioneer reserves the right to withdraw from the sale any of the items, to sell items not listed, to group or subdivide one or more lots, or to sell all the items listed in bulk. Items are generally sold to the highest bidder but some may be subject to the seller’s right of confirmation. The Auctioneer has the right to reject any nominal or fractional bid which he be-lieves may negatively affect the sale. Ashman Company may amend, change, modify, discontinue or suspend any aspect of the auction sale without notice and without liability to prospective

bidders. Additional terms and conditions of sale may be added and will be announced and/orposted on the premises prior to the auction.

UPCOMING AUCTIONSTuesday, December 4 • CNC Fabrication Facility

Albuquerque, New Mexico

Tuesday, December 11 • Haas CNC Machine Shop

Santa Ana, California

Wednesday, December 12 • CNC Fabrication & Machine Shop

Garden Grove, California

Tuesday, December 18 • Tool & Die Facility

San Leandro, California

Wednesday, December 19 • Amada Fabrication Facility

Morgan Hill, California