On-Stage_Stands_Product_Catalog_2011

On-Stage Stands® |

2

TM

The Music People, Inc. is the parent company of some of the most recognized brand names in the music industry. The TMP family of brands provides products designed by musicians and production professionals, people who have real-world product application experience. The result is over 30 years of innovation and an array of gear with truly useful features and real-world durability.

On-Stage Stands, our flagship brand, has been around since TMP’s early beginnings. Founded on a promise of affordability, durability and innovation, On-Stage Stands products are used everyday in studios, showrooms, and on stages everywhere. Over the years, the brand has grown to include over 300 products in 8 different categories: Guitar, Microphone, Keyboard, Workstation, Rack/Amp/Mixer, Speaker, Lighting, and Band & Orchestra. In each category On-Stage Stands has become a leader, changing the way musicians display, support, and protect their prized instruments and equipment. Today, professionals and amateurs all over the world put their trust in On-Stage Stands.

Launched in 2007, the On-Stage Gear brand offers essential products for guitar and keyboard players. For your convenience, dust covers, sustain pedals, guitar straps, and other On-Stage Gear products are located in the Guitar and Keyboard section of this catalog. New for 2010, On-Stage Gear adds a line of road-ready flight cases. Find them in the rack/amp/mixer section of this catalog.

Hennessey Guitar Parts rolled out in 2008, offering a newly designed series of premium strap locks. These cool new locks not only secure your strap for whatever guitar stunts you have in mind, but they look good, too. Find them in the guitar section of this catalog.

Since 2005, On-Stage Sticks has offered a line of durable, matched sticks available in a choice of wood species. An assortment of mountable bags and holders keep your sticks within reach.

The DrumFire brand was first introduced in 1984 and brought back in 2009 by popular demand. DrumFire drumsets are available in two sizes: a standard size kit for most teens and adults, and a junior size for the smaller percussionist. These full-featured DrumFire kits come in a choice of colors. Accessories such as mats, dust covers, and bags are also found under the DrumFire brand.

The Hot Wires brand was introduced in 1979 alongside with On-Stage Stands. Hot Wires brand cables, snakes, and DI’s provide working musicians and audio professionals with clean, reliable signal. We offer cables for instruments, microphones, and speakers.

Versa-Tek products supply solutions for AV installation. A selection of flush-mount, adjustable and tilting LCD mounts allow monitors and televisions to be installed anywhere, opening up new design possibilities for any space.

Audio Spectrum offers an uncompromised entry into wireless, handheld, and studio microphones. Their clean and consistent sound can kick start any live or studio performance.

TMP has provided musicians, DJ’s, and production engineers with innovative designs and roadworthy gear for over 31 years. The brands in this catalog continue the tradition of offering top-notch gear, outstanding in function and value.

The Music People! Inc.

®

| Call or Email Today for Pricing Information | 1.800.289.8889 | [email protected]

3

GUITAR .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 4Classic Guitar Stand Series .. .. .. .. .. .. .. 4A-Frames .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 6Hang-It™ Guitar Stand Series .. .. .. .. .. 7Hennessey Master’s Series . .. .. .. .. .. .. 8Flip-It® Guitar Stands .. .. .. .. .. .. .. .. .. 8Wall Hangers .. .. .. .. .. .. .. .. .. .. .. .. .. 9Bags & Cases .. .. .. .. .. .. .. .. .. .. .. .. . 10Accessories .. .. .. .. .. .. .. .. .. .. .. .. .. . 12

Hennessey Guitar Parts: Strap Locks 12On-Stage GEAR Guitar Essentials .. .. . 13

MICROPHONE .. .. .. .. .. .. .. .. .. .. .. . 14Tripod Base Mic Stands/Boom Combos . 14Hex-Base® Mic Stands . .. .. .. .. .. .. .. . 16Round Base Mic Stands .. .. .. .. .. .. .. . 17Studio Booms . .. .. .. .. .. .. .. .. .. .. .. . 18ALL-IN-ONE MIC PAKS .. .. .. .. .. .. .. .. . 19Mic/Mic Stand Bags .. .. .. .. .. .. .. .. .. . 19Desktop Stands .. .. .. .. .. .. .. .. .. .. .. . 20Instrument Mic Stands/Boom Combos . . 21Mic Booms. .. .. .. .. .. .. .. .. .. .. .. .. .. . 21Accessories .. .. .. .. .. .. .. .. .. .. .. .. .. . 22

KEYBOARD .. .. .. .. .. .. .. .. .. .. .. .. .. . 24X-Style Keyboard Stands .. .. .. .. .. .. .. . 24Platform Stands . .. .. .. .. .. .. .. .. .. .. . 26Folding-Z Stand Series .. .. .. .. .. .. .. .. . 26Attachments . .. .. .. .. .. .. .. .. .. .. .. .. . 27A-Frames .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 28Keyboard Benches . .. .. .. .. .. .. .. .. .. . 28Accessories. .. .. .. .. .. .. .. .. .. .. .. .. .. . 29

On-Stage GEAR Keyboard Essentials .29

WORKSTATION .. .. .. .. .. .. .. .. .. .. .. . 30Workstations. .. .. .. .. .. .. .. .. .. .. .. .. . 31Keyboard/Mixer/DJ Stands .. .. .. .. .. .. . 32Laptop Stands . .. .. .. .. .. .. .. .. .. .. .. . 32

RACK/AMP/MIXER .. .. .. .. .. .. .. .. .. . 33Amp Stands .. .. .. .. .. .. .. .. .. .. .. .. .. . 33Amp/Mixer Stands .. .. .. .. .. .. .. .. .. .. . 34Rack Stands . .. .. .. .. .. .. .. .. .. .. .. .. . 35Karaoke Stands .. .. .. .. .. .. .. .. .. .. .. . 36

On-Stage GEAR Flight Cases .. .. .. .. .36

SPEAKER . .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 37Speaker Stands .. .. .. .. .. .. .. .. .. .. .. . 37Monitor Stands. .. .. .. .. .. .. .. .. .. .. .. . 39ALL-IN-ONE SPEAKER PAKS .. .. .. .. .. . 39Wall Mounts/Brackets/Attachments . .. . 40Accessories .. .. .. .. .. .. .. .. .. .. .. .. .. . 41

LIGHTING . .. .. .. .. .. .. .. .. .. .. .. .. .. . 42Lighting Stands .. .. .. .. .. .. .. .. .. .. .. . 42Lighting Stands/Truss Systems .. .. .. .. . 43Accessories .. .. .. .. .. .. .. .. .. .. .. .. .. . 43

BAND & ORCHESTRA. .. .. .. .. .. .. .. . 44Sheet Music Stands .. .. .. .. .. .. .. .. .. . 44Conductor Stands. .. .. .. .. .. .. .. .. .. .. . 46Woodwind/Brass Stands . .. .. .. .. .. .. . 47Desktop Stands .. .. .. .. .. .. .. .. .. .. .. . 48Accessories .. .. .. .. .. .. .. .. .. .. .. .. .. . 49

Drum Sticks . .. .. .. .. .. .. .. .. .. .. .. 50Bags & Accessories .. .. .. .. .. .. .. 51Drum Set Kits . .. .. .. .. .. .. .. .. .. .. 52Accessories . .. .. .. .. .. .. .. .. .. .. .. 53

Stands, Equipment/Stand Bags and Cases, and Performance Accessories Featured Brands: On-Stage Stands On-Stage Gear Hennessey Guitar Parts

Drum Set Kits, Sticks and Accessories Featured Brands: On-Stage Sticks DrumFire

Pro-Audio Equipmentand AV Solutions Featured Brands: Hot Wires & In-Line Audio Audio Spectrum VERSA-TEKCables .. .. .. .. .. .. .. .. .. .. .. .. .. .. 56Cable Accessories .. .. .. .. .. .. .. .. 58Stage Snakes . .. .. .. .. .. .. .. .. .. .. 58Direct Boxes .. .. .. .. .. .. .. .. .. .. .. 58Microphones . .. .. .. .. .. .. .. .. .. .. 59Wireless Systems .. .. .. .. .. .. .. .. 60LCD/Plasma Wall Mounts .. .. .. .. 61

TTTTTTTTTTTTTTTTaaaaaaaaaaaaaaaabbbbbbbbbbbbbbbblllllllllllllllleeeeeeeeeeeeeeee ooooooooooooooooffffffffffffffff CCCCCCCCCCCCCCCCoooooooooooooooonnnnnnnnnnnnnnnntttttttttttttttteeeeeeeeeeeeeeeennnnnnnnnnnnnnnnttttttttttttttttssssssssssssssss

OOOOOOOOOOOOOOOOnnnnnnnnnnnnnnn--SSSSSSSSSSSSSSSStttttttttttttttaaaaaaaaaaaaaaaagggggggggggggggggggggeeeeeeeeeeeeeeee SSSSSSSSSSSSSSSStttttttttttttttaaaaaaaaaaaaaaaannnnnnnnnnnnnnnddddddddddddddddssssssssssssssss PPPPPPPPPPPPPPPaaaaaaaaaaaaaaaacccccccccccccccckkkkkkkkkkkkkkkaaaaaaaaaaaaaaaagggggggggggggggggggggiiiiiiiiiiiiiiinnnnnnnnnnnnnnngggggggggggggggggggggAWARD-WINNING PACKAGINGOur family of brands ship in eye-catching, descriptive packaging. Our POP packaging displays itself, saving you time and marketing resources. As an added tool and resource look for this |PACK| symbol, which will point to some of our featured award-winning packaging!

Music Inc. readers voted On-Stage Stands for the 2008 Suppliers Excellence Award in POP Displays in the Marketing Support Category. That’s because our packaging serves as an invaluable sales tool for dealers and their staff. Look for this |DISPLAY| symbol to find out which products are available with additional floor display kits and options so that you too can merchandise your store with more retail-ready product and sell it quickly!

On-Stage Stands® |

4

1. 2. 3.

GS7121B-XCG 71030

Deluxe Single Guitar Stand Made with truly classical style, this mid-priced stand features a rugged die-cast housing, velveteen rubber padding, and an extra thick neck guard. Also features our Smart-Yoke™design. A special “V” groove prevents upper yoke rotation.

Applications: Single Guitar StandPadding: Velveteen RubberHeight Adj.: 22-27.5” Leg Housing: Die-castTubing: 19mm/ 22mmColor: Black Powder Coat Finish

XCG-4 71025

Classic Guitar Stand A great value! Our best seller combines a special formula velveteen rubber with extra thick tubing. It features a removable lower stepped yoke, security strap on the upper yoke, and adjustable height. Perfect for any guitar.

Applications: Single Guitar StandPadding: Velveteen RubberHeight Adj.: 19.25-24”Leg Housing: Heavy-Duty Sheet MetalTubing: 17mm/ 22mmColor: Black Powder Coat Finish

Other Features for XCG-4:1. New molded end caps keep the security strap from falling off.2. “V” Groove and non-scratching friction knob locks upper shaft and prevents rotation.3. Only our Smart-Yoke™ is designed to stay up right, so you will never have to kick it in place again! The key-way locking pin makes the yoke detachable and also allows it to rotate 360 degrees. The Smart-Yoke™automatically adjusts to most guitar shapes, even asymmetrical instruments, and will always stay right side up when not in use.

CLASSIC GUITAR STAND SERIES

5


5

1. 2.

GS7252B-DUO 71070

Double Guitar Stand This double version of GS7121B safely holds one or two guitars of any type. It features a rugged die-cast housing, velveteen rubber padding and our key-way locking Smart-Yoke™. The three-leg design provides complete stability. All component parts are keyed to align properly.

GS7352B-TRI 71060

Triple Guitar Stand This triple guitar version adds a locking triple top yoke. It will hold any combination of guitars, basses and even banjos on one safe stand. Its three legged design provides complete stability for one, two or three instruments.

GS7652B 71080

Six Guitar Stand This stand provides a great way to conserve valuable showroom or studio floor space by holding six guitars on just one foldable tripod stand. It also features six folding back bumpers and a height adjustable center shaft. Holds most common guitar designs.

Applications: Holds Six GuitarsPadding: Velveteen RubberLeg Housing: Hi-impact PlasticTubing: 25mm/ 30mmColor: Black Powder Coat Finish

Dealers - Save on valuable store room floor space with this safe and affordable stand!

GS7221BD 51717

Double Guitar Stand This affordable Double Guitar Stand combines a stable three-leg design with a set height lower yoke for the best stability of the stand and your guitars. It features a tripod folding base, upper and lower folding yokes, velveteen rubber on all contact surfaces, and non-slip rubber feet. It can hold any combination of electric, acoustic, classical, and bass guitars, even mandolins and banjos.

GS7321BT 51718

Triple Guitar Stand The triple version of the GS7221BD combines a stable three-leg design with a set height lower yoke for the best stability of the stand and your guitars. Each yoke is strategically aligned above a stand leg for maximum stability. This design allows for the overall height of the stand to be within arms reach at standing height, so there’s no longer a need to bend over to grab your guitar!

GS7252B-DUO Applications: Holds Two GuitarsPadding: Velveteen RubberHeight Adj.: 21.75-30” Leg Housing: Die-castTubing: 19mm/ 22mmColor: Black Powder Coat Finish

GS7352B-TRI Applications: Holds Three GuitarsPadding: Velveteen RubberHeight Adj.: 23-30.5” Leg Housing: Die-castTubing: 19mm/ 22mmColor: Black Powder Coat Finish

Other Features:1. Once the legs are pushed in place, the die-cast leg housing keeps them there every time.2. Short back leg tilts the stand to safely hold a guitar. (Single model stands only).

Other Features:These models include an auto-locking hinge to keep your guitars safe and secure.

GS7221BD Applications: Holds Two Guitars Padding: Velveteen RubberHeight Adj.: 19-33” (between upper and lower yoke)Base Spread: 22” Color: Black Powder Coat Finish

GS7321BT Applications: Holds Three GuitarsPadding: Velveteen RubberHeight Adj.: 17-32” (between upper and lower yoke)Base Spread: 22”Color: Black Powder Coat Finish

On-Stage Stands® |

6

1. 2. 3.

Other Features of Pro A-Frame Stands:1. The patented stepped yoke design on all of our A-Frames holds both acoustic and electric guitars, as well as desktop mixers and combo amps.2. Folds flat in seconds for easy storage and travel.3. 10° tilt back angle and splayed foot print make for a stable foundation.

GS7462B 34442

Professional A-Frame Our strongest A-Frame features heavy-duty 1” square tubing, velveteen rubber and a “uni-construction” design, meaning that there are no parts to lose. It holds both acoustic and electric guitars as well as desktop mixers and combo amps. No more need to own multiple stands when our patented stepped yoke design can hold it all! The unique shape also allows this stand to nest together with others when not in use.

Applications: Single Guitar/Mixer/Amp StandPadding: Velveteen RubberTubing: 1 x 1” Square and RoundColor: Black Powder Coat Finish

GS7462DB 37440

Pro Double A-Frame A versatile double version of our heavy-duty A-Frame. It’s strong enough to hold a small combo guitar amp with room left for an electric guitar in the back. A must for the gigging musician.

Applications: Holds two guitars, an amp with one guitar, or a combination of most name-brand acoustic, semi-acoustic and electric guitarsPadding: Velveteen RubberTubing: 1 x 1” Square and RoundColor: Black Powder Coat Finish

GS7465B 71049

Pro Flip-It! A-Frame Possibly the safest guitar stand on the market today, the Flip-It!® A-Frame combines the convenience of an A-frame with the safety of our patented Flip-It® top yoke. The upper yoke stores between the stand’s legs for travel or storage.

Applications: Single Guitar StandHeight Adj.: 18.5-26.25”Padding: Velveteen RubberTubing: 1 x 1” Square and RoundColor: Black Powder Coat Finish

GS7362B 42297

Single A-Frame A classic, sturdy A-frame that can hold one guitar, either an acoustic or electric. Features heavy-duty 1 x ½” tubing, velveteen rubber, and a “uni-construction” design, which means that there are no parts to lose. The tilt back design, splayed footprint, and rubber end caps guarantee stability.

Applications: Single Guitar StandPadding: Velveteen RubberTubing: 1 x ½” Rectangular - 30mm RoundColor: Black Powder Coat Finish|PACK| ---►

This versatile stand can also fold flat in seconds for the musician on the go! The upper yoke stores between the stand’s legs while the A-Frame folds flat.

A-FRAME GUITAR STANDS

Our extremely versatile A-Frame hascapabilities like no other! Not only can itfold flat for travel, as well as nest together with other stands for storage, it can also be used to hold various small amps and mixers.


7

1. 2. 3. 4. 6.5.

Other Features for GS8100 & GS8200:1 & 2. GS8100 Patent-pending ProGrip system not only locks your guitar in place, but also allows for easy one-handed operation. 3 & 4. GS8200 Patent-pending ProGrip system also locks your guitar in place and allows for easy one-handed operation. 5. Cam-locking clutch mechanism combines a high-impact plastic with a low-profile design, making height adjustments safe and easy to use.6. Height adjustment feature accomodates the size of your guitar so that the body rests against the legs padded back bumpers.

GS7155 40712

Hang-It™ Single Guitar Stand The single version of our Hang-It!™ Guitar Stands is height adjust-able. It is designed to hang most standard guitars and basses by their headstock, while the body rests against the padded legs. The tripod base provides stability, and all three legs fold simultaneously for guitarists on the go. Features velveteen rubber on all contact surfaces.

GS7255 40713

Hang-It™ Double Guitar Stand The double version of our Hang-It!™ Guitar Stands is height adjustable. It is designed to hang most guitars and basses by their headstock. The tripod base provides stability and folds closed for guitarists on the go.

GS7355 40714

Hang-It™ Triple Guitar Stand The triple version of our Hang-It!™ Guitar Stands is designed to hang most guitars and basses by their headstock, while a padded back bumper positions the body. The tripod base provides stability when holding either 1, 2 or 3 guitars and folds for guitarists on the go. GS7155 Applications: Single Guitar StandHeight Adj.: 24-38”Padding: Velveteen RubberLeg Housing: Sheet-Metal/PlasticTubing: 16mm/ 19mmColor: Black Powder Coat Finish

GS7255 / GS7355GS7255 Applications: Holds Two GuitarsGS7355 Applications: Holds Three GuitarsHeight Adj.: 36-42” Padding: Velveteen RubberLeg Housing: Sheet-MetalTubing: 19mm/ 25mmColor: Black Powder Coat Finish

NEWfor

2010

NEWfor

2010

NEWfor

2010

NEWfor

2010GS8100 71062

Hang-It™ ProGrip Guitar Stand This patent-pending stand includes padded gates that close when the guitar headstock rests on the upper yokes. The weight of the guitar keeps the gates closed, preventing it from falling even if the stand is vigorously bumped on stage. The GS8100 is height-adjustable to accommodate the size of any guitar, ensuring that the body gently rests against its padded legs. Features include velveteen rubber padding, reinforced tripod leg braces, non-slip rubber end caps, and a cam locking mid-point clutch.

Applications: Single Guitar StandHeight Adj.: 30-43”Weight Capacity: 36 lbs.Padding: Velveteen RubberConstruction: Steel and reinforcednylon leg housing and clutchesTubing: 17mm/ 25mmColor: Black Powder Coat Finish|PACK| ---►

GS8200 58623

Hang-It™ ProGrip II Guitar Stand The GS8200 combines the security and convenience of an auto-locking yoke with the ease of the Hang-It™ design. Simply hang your guitar on the patent-pending yoke and the weight of your guitar draws the spring-loaded yoke arms to pull the gates of the yoke shut. All in one single action! Removal is just as easy; picking up your guitar opens the gates instantly. Features include inert rubber padding, reinforced tripod leg braces, non-slip rubber end caps, and a cam locking mid-point clutch.

Applications: Single Guitar StandHeight Adj.: 30-43”Weight Capacity: 40 lbs.Padding: Inert RubberConstruction: Steel and reinforcednylon leg housing and clutchesTubing: 17mm/ 25mmColor: Black Powder Coat Finish

HANG-IT™ GUITAR STANDS

1. 2.

Other Features for Flip-It® Guitar Stands:1. The Flip-It!® yoke makes for easy one-handed operation.2. The Flip-It!® yoke can attribute its ability to flip up or down (depending on model) to its heavy-duty spring locking joint.

On-Stage Stands® |

8

GS7143B-B 35279

Flip-It® Guitar Stand Includes the essential features of our patented Flip-It!® guitar stand, including the Flip-It!® upper yoke and removable lower yoke. The upward angle of the lower yoke design, teamed with the unmatched protection of the upper yoke, make Flip-It!® model stands some of the safest on the market today!

Applications: Single Guitar StandPadding: Velveteen RubberLeg Housing: Sheet-MetalTubing: 19mm/ 22mmColor: Black Powder Coat Finish

GS7153B-B 71090

Flip-It® Gran Guitar Stand The patriarch of the Flip-It!® family. The lower yoke’s upward angle design, teamed with unmatched protection of the upper Flip-It!® yoke, make this model one of the safest stands on the market today. In fact, the safe and easy operation of the Flip-It!® yoke has saved many a broken neck!

Applications: Single Guitar StandPadding: Velveteen RubberHeight Adj.: 23-29” Leg Housing: Die-CastTubing: 19mm/ 22mmColor: Black Powder Coat Finish

GS7153MC-II 71095

Flip-It® Gran Multi Pak II 15 stands, 3 colors, 5 of each: Black finish, black rubber / Black finish, purple rubber /Midnight blue finish, blue rubber.

WGS-100 40719

Wooden Guitar Stand This attention-getting stand is perfect for showcasing your favorite guitar in the office, studio or at home! Crafted from wood and strategically-placed steel parts, this stand is sturdy enough to hold your most valuable instruments. A steel V-groove prevents the upper yoke from rotating. Features solid rosewood with satin finish, velveteen rubber, and an added safety lock strap.

Applications: Single Guitar StandHeight Adj.: 19.25-24”Padding: Velveteen RubberLeg Housing: Sheet-MetalTubing: 19mm/ 33mmColor: Rosewood & Black|PACK| ---►

The Hennessey Master’s Series includes professional quality display pieces. All models in the series feature solid rosewood with a satin finish and come shipped in eye-catching four-color packaging. The series also includes the WMB-100 Wood Microphone Box, which is a beauti-ful choice to store, protect and display your studio mics.

GS7153B-P 71094 Gloss Black finish, Purple Velveteen Rubber

GS7153MBL-BL 71093 Gloss Midnight Blue finish, Blue Velveteen Rubber

The Flip-It® GS7153, featuring a high-gloss lacquer finish, is also available in the following colors:

HENNESSEY MASTER’S SERIES FLIP-IT® GUITAR STANDS


9

GS7253B-B 71091

Duo Flip-It® A double version of the Flip-It!®, the Duo model holds two guitars of any type. It features a stable three-leg design and a smart-locking top yoke. A must for vintage instrument collectors.

GS7253B-B Applications: Holds Two GuitarsPadding: Velveteen RubberHeight Adj.: 22-31” Leg Housing: Die-CastTubing: 19mm/ 22mmColor: Black Powder Coat Finish

GS7353B-BApplications: Holds Three GuitarsPadding: Velveteen RubberHeight Adj.: 23-30.5” Leg Housing: Die-CastTubing: 19mm/ 22mmColor: Black Powder Coat Finish

GS7353B-B 71092

Tri Flip-It® All the same great features as the Duo Flip-It!®, but is designed to support three guitars on one stand.

fl ip-it!®

Quality, function and flair! A unique patented design only available from On-Stage Stands®. Our line of Flip-It® Stands offers all the features you have come to expect from On-Stage Stands®: quality steel tubing, seam welded joints, velveteen rubber, key-way lock and more! We call it the Flip-It® because of our patented upper yoke. The flip-top yoke completely surrounds the guitar and cushions it with soft velveteen rubber. One flip up opens the yoke. One flip down secures your guitar. If your guitar is ever accidentally knocked over, the flip-top yoke will break the fall. It could save your neck!

A. GS7650SB 49866 Straight Hanger Hangs guitars facing straight.

B. GS7650RB 49868 Right Hanger Hangs guitars facing right. C. GS7650LB 49867 Left Hanger Hangs guitars facing left.

GS7640 40970

Round Metal Guitar Hanger This mount is offered with a round solid steel base and features a black velveteen rubber yoke. For studio or home use. Added foam rings on yoke design.

GS7730 49979

Mini Wood Wall Guitar Hanger This wall hanger can be mounted with 2 screws and will hold most headstock designs. The yoke assembly swivels to allow the guitar to hang straight. Constructed from solid pine and steel, it features a black velveteen rubber yoke. Screws not included. Added foam rings on yoke design.

Slat Wall Guitar Hangers A staple of every showroom, these guitar hangers are available in fixed-position and adjustable versions. All models are finished in black and feature velveteen rubber yoke covers. Designed for slat wall use. All models (except GS7660B) have added two foam rings to the yoke design for a better grip on your guitar.

D. GS7650AB 49822 Adjustable Hanger Universal adjustment to hang guitar facing left, right or straight.

E. GS7660B 49869 Adjustable Flip-It® Hanger Notches at 90° and 45° left or right. Flip-It® yoke flips up for ease-of-use.

A.

B. C.

E.D.

GUITAR WALL HANGERS

MPROVEDDESIGN MPROVED

DESIGN

MPROVEDDESIGN

On-Stage Stands® |

10 GUITAR CASES & GIG BAGS

GBE-4550 38549 Electric Guitar Gig BagLower Bout: 16”; Upper Bout: 15”;Depth: 1”; Length: 43”

GBA-4550 38550 Acoustic Guitar Gig Bag Lower Bout: 18”; Upper Bout: 14.5”;Depth: 5”; Length: 44”

GBB-4550 38551 Bass Guitar Gig Bag Lower Bout: 16”; Upper Bout: 15”;Depth: 1”; Length: 48”

GBC-4550 38552 Classical Guitar Gig Bag Lower Bout: 17”; Upper Bout: 13”;Depth: 4.75”; Length: 42”

Guitar Gig Bags Protect your new investment! These stylish yet durable 4550-Series Guitar Bags are available for electric, acoustic, classical and bass guitars. They are made from a rugged, water repellent, easy to clean 600-D nylon material. Features include interior lining, heavy-duty 2-pull zipper, and a front zip pocket to carry pics or replace-ment strings. Use either the two carrying handles or the removable padded backpack-style straps to carry your guitar with ease!

A. GCA5000B 50361 Acoustic Guitar Case Sized to fit most dreadnought and 12-string guitars.GCA5000B Dimensions: (l)45.47 x (w)18 x (d)6.3”

B. GCA5500B 55449 Semi-Acoustic Guitar Case Sized to fit most semi-acoustic and dreadnought guitars. GCA5500B Dimensions: (l)43.5 x (w)17.7 x (d)6.5”

GCA5000B / GCA5500B / GCC5000BConstruction: Plywood w/ Vinyl covering Interior Lining: Black PlushHardware: Gold-platedColor: Black

D. GCE6000B 55452 Electric Guitar Case Sized to fit most Electric Guitars, including Fender Strats. Black Vinyl exterior.

E. GCE6000T 51173 Electric Guitar Case Same features as the GCE6000B, but with Tweed Vinyl exterior.GCE6000B / GCE6000T Dimensions: (l)42.5 x (w)14.6 x (d)4” GCE6000B / GCE6000T / GCB6000BConstruction: Plywood w/ Vinyl covering Interior Lining: Black PlushHardware: Chrome

C. GCC5000B 55758 Classical Guitar Case Sized to fit most Classical and Spanish style guitars. GCC5000B Dimensions: (l)42.1 x (w)16.9 x (d)5.9”

F. GCB6000B 55761 Bass Guitar Case Sized to fit most Bass guitars. Black Vinyl exterior. GCB6000B Dimensions: (l)48 x (w)15.2 x (d)4.5”

Hardshell Guitar Cases Our hardshell guitar cases are sized and custom-molded to provide protection and transporting ease for your guitar. Three models include an Acoustic Case, Semi-Acoustic Case and new for 2010, a Classical Case. All cases are constructed from quality materials with an interior that is custom molded to keep the guitar stable with full neck support. The interior also features a soft plush lining and an accessories compartment, perfect for picks and capos.

Hardshell Guitar Cases Our hardshell guitar cases are sized and custom-molded to provide protection and transporting ease for your guitar. The series includes two Electric Guitar Cases and new for 2010, a Bass Guitar Case. All cases are constructed from quality materials with reinforced piping on all exterior edges. A custom molded interior keeps the guitar stable with full neck support and also features a soft plush lining and an accessories compartment, perfect for picks and capos.

NEWfor

2010

NEWfor

2010

G

NEWfor

2010

NEWfor

2010

A. B. C.

E.

D.

F.


11

GBE4660 50580

Deluxe Electric Guitar Gig Bag This custom-shaped, lightweight soft case is perfect for most standard electric guitars. The soft case design combines the protection of a thick padded interior with the portability of a canvas gig bag. Manufactured from rugged 600-D nylon material, the interior is lined with a ½” compressible foam material to provide more substantial protection for your guitar. Features two exterior accessory pockets; heavy-duty 2-pull zippers, allowing the bag to be unzipped lengthwise; one side carry handle; one top carry handle; adjustable backpack-style straps; an ID tag; and two bag hangers.

Dimensions: (w)14.37 x (h)38.97 x (d)3” Material: Heavy-duty 600-D nylon exterior with leather accentsPadding: 7mm foam lined interiorColor: Black with gray accents

GPCE5550 49986

Poly Foam Electric Guitar Case Protect your new guitar! This rugged heavy-duty bag features a plush lined interior and a heavy-gauge 2-pull zipper, allowing the bag to be unzipped length-wise from the center. Use either the two carrying handles for a well-balanced load or the removable, adjustable shoulder strap to carry your guitar with ease. A front accessories compartment is perfect for pics, replacement strings or other accessories.

Dimensions: (l)40.9 x (w)15.35 x (d)4.92”Material: Heavy-duty nylon exterior; Plush-lined molded interiorColor: Black

BNC5000 53482

Banjo Case Hit the road with confidence! This affordable case is rugged enough to protect your 4, 5, or 6 string banjo no matter where you go. It’s made from a durable nylon material and features a custom-molded, plush-lined interior that secures the instrument and won’t scratch its finish. A heavy-gauge two-pull zipper makes opening and closing easy. The bag can be carried using the two carry handles or adjustable backpack-style straps. A front accessories pocket is perfect for pics, replace-ment strings or other accessories.

Applications: Case for 4, 5 or 6 string banjoExterior Dimensions: (w)17 x (h)9 x (l)44”; (w)7.5” at neckInterior Dimensions: (w)14 x (l)40.5”; (w)5.1” at neckAccessories Pocket: 10 x 14” Material: Heavy-duty 600-D nylonColor: Black

B

NEWfor

2010

NEWfor

2010

GPCA5550B 55760 Poly Foam Acoustic Guitar Case Sized to fit most Acoustic guitars.GPCA5550B Dimensions: (l)43.5 x (w)17.2 x (d)6.3”

GPCC5550B 55762 Poly Foam Classical Guitar Case Sized to fit most Classical guitars.GPCC5550B Dimensions: (l)43.5 x (w)17.5 x (d)6.3” GPCA5550B / GPCC5550B:Material: Heavy-duty nylon exterior; Plush-lined molded interiorColor: Black

Poly Foam Guitar CasesThese heavy-duty polyfoam guitar cases feature a plush-lined interior and heavy-gauge 2-pull zipper, allowing the case to be unzipped length-wise from the center. Two carrying handles and an adjustable shoulder strap make for easy, well-balanced transportation. An integrated compartment is perfect for picks, replacement strings, and other accessories.

1. 2.

On-Stage Stands® |

12

NEWfor

2010

NEWfor

2010

TM

NSLD1000 40953 Retailers - Ask about our FREE store display!

NSL7200C 49768 Chrome finish

NSL7200B 49756 Black finish

NSL7200G 49782 Gold finish

NSL7300B 51674Black finish

NSL7300PV 51675 Purple finish

NSL7300GM 51676 Gun Metal finish

NSL7300SL 51677Silver finish

NSL7300BL 51678 Blue finish

NSL7300R 51679 Red finish

NSL8200C 56867 Chrome finish

NSL8200B 56869 Black finish

NSL8200G 56868 Gold finish

Hennessey™ Strap Locks Jump! Swing your guitar! Be alive on stage! Push your axe in any direction and your strap will always remain locked on to your guitar. The Hennessey™ Strap lock, with its safe & easy-compress and release-action system, allows for easy removal of your strap and for a secure connection every time! All Strap Locks are packaged and sold in pairs. |DISPLAY| -- NSLD1000

7200-Series Strap Locks Available in three different finishes. Constructed from solid brass.

7300-Series Metallic Strap Locks Available in six different finishes. Constructed from anodized aluminum.

8200-Series Die-Cast Strap Locks Available in three finishes. Plunger-style mechanism with custom designed wingnut that locks the strap in place. Constructed from die-cast zinc and brass. Included: Dual purpose wrench, which can be used for tightening the wingnut onto the strap lock as well as a bottle opener.

Other Features for DT8500:1. Dual tension adjustment knobs fine tune the backrest for comfortable playing positions.2. 10 positions adjust height from 21-31”.

DT8500 54682

Guitar/Keyboard Throne The DT8500 is designed for flexibility and works well for guitarists and keyboard players. The height adjustable seat allows for a comfortable playing position. Both seat and backrest are padded and finished with a rugged leather-like vinyl. Braced legs maintain stable contact with the stage, and the footrest is ideal for guitarists. Quick set up and tear down make it an ideal solution for the gigging musician and a handy addition to any studio.

Height Adj.: 21-31”Base Spread: 16.5”Weight Capacity: 240 lbs.Padding: 12.25” Padded VinylColor: Black

FS7850B 52669

Foot Stool Our foot stool adjusts to five fixed height positions. Rubber end caps and a non-slip pad provide excellent stability. It folds flat, making for easy travel. An excellent item for classical and acoustic guitarists.

Dimensions: 3.5 x 9.75”Color: Black

ACCESSORIES HENNESSEY STRAP LOCKS


13

GSA20BKSB 48637

Nylon Guitar Strap Made to last! Our new Nylon Guitar Strap is woven from the same strong and durable nylon webbing used to make car seat belts. This strap also features 2-ply leather ends and reinforced stitching. Adjustable length: 32-55”.

GSAPK6500 48643

Jar of 100 Pick Holders Keep your picks where you need them. These pick holders feature a peel and stick backing to mount to a guitar, amp, or any other flat surface. They are made from durable molded plastic. Each spring-loaded holder can store up to five medium weight picks.

GSAPK6600 53786

Microphone Stand Pick Hold-It The GSAPK6600 Pick Holder keeps your picks where you need them. 7” Flexible and durable rubber can hold a variety of picks in different shapes and sizes and won’t slide down your mic stand. Attaches to any standard mic stand or boom up to 7/8” in diameter. Holds up to 7 picks (6 included).

GTA7600 48642

Guitar Tuner The GTA7600 is a chromatic tuner perfect for tuning your guitar or bass. It offers basic functionality and convenient tuning functions. Feature include an ultra-compact design, high-precision LCD, auto power-off function, built-in mic, and a comprehen-sive user interface. Two AAA batteries included.

Built-in Mic: For acoustics (¼” input jack for electric)Calibration: 430~450Hz, with 1 Hz stepTuning Key: C, F, Eb, Bb; Tuning Range: C1~B7Precision: ±1 cent Display: 3 LEDs shows in-tune or mis-tune, LCDmeter indicates precision of tuning in cents.Power Off: After 5 minutes idle.Number of Notes: 12 notes: 4C~4BBuilt-in Speaker: ø27mm, dynamic speakerEarphone Jack: ø3.5mm jackInput Jack: 6.3mm jack

On-Stage Gear Guitar Straps All straps are made to last with a durable 2” polypropylene webbing, 2-ply leather ends and rein-forced stitching. The colors will not bleed and the edges will not fray! Adjustable length: 31-52”. GSA10BK - Black 50204 GSA10GR - Gray 49746 GSA10RD - Red 48635 GSA10OR - Orange 49744 GSA10YW - Yellow 48634 GSA10GE - Green 49743 GSA10BL - Blue 49742 GSA10BR - Brown 49745 GSA10BU - Burgundy 49741 GSA10WT - White 49747

GSA10BKRD 50204Black with Red Stripes GSA10BLBST 49746Blueburst Pattern GSA10YWBST 48636Sunburst Pattern

GSA6230 49748

Click-It Guitar Strap This fully adjustable guitar strap is made from seat belt quality nylon webbing. It features reinforced stitching and an added Click-It lock design, making for quick and easy use. Adjustable length: 32-55”.

Click-It allows for quick and easy attachment and removal from your guitar!

ON-STAGE GEAR GUITAR ESSENTIALS

GSAC6400 56448

Grip-Clip™ - Guitar Breakaway Cable ClipThe ingenious Grip Clip™prevents the inadvertent unplugging of guitars, basses, and other strap-worn instruments. It eliminates the possibility of kinking caused by wrapping an instrument cable around a strap button. By clipping high up on the strap behind the player’s back, the Grip Clip™ produces a wide gentle loop which reduces stress on both the strap and output jack, while simultaneously reducing and protecting against the likelihood of a stepped-on or snagged cable. The cable attaches to the Grip Clip™ via a snap-in channel to accommodate all popular instrument cables.|DISPLAY| ---►

NEWfor

2010

NEWfor

2010

1. 2.

Other Features for MS7701B/C:1. The easy-to-use Euro-Style boom clutch featured in this series allows for convenient one-handed angle adjustments.2. Tripod base leg housing is made from a combination of plastic and steel. Legs fold for easy storage and travel.

14

On-Stage Stands® |

TRIPOD BASE MIC STANDS / BOOM COMBOS

A. MS7701B 34864

Euro Boom Mic Stand (Black) Our best selling stand! This Euro Boom boasts a hybrid sheet metal and composite leg hous-ing, making it virtually unbreakable. With a removable boom arm and its ability to fold flat, this stand is a must for every member of the band. Features a zinc mid-point clutch and black finish. B. MS7701C 72015

Euro Boom Mic Stand (Chrome) Same design as the MS7701B, but with a chrome shaft.

MS7701B / MS7701C Boom Length: 30”Height Adj.: 36-64”Base Spread: 23”

A.

B.

15151515


C. D. E.

D. MS9701B + 56984

Heavy-Duty Euro-Boom Mic StandSame features as the MS9700B+ , with added 30” boom. Boom features an oversized angle adjustment knob for quick and easy adjustments and a non-slip clutch for secure positioning. A solid steel 5/8-27” threaded lug, oversized shock mount locking washer and removable steel counterweight complete the professional package!

A. MS7700B 30077

Euro-Style Tripod Base Mic Stand An extremely stable stand! Like the MS7701B, this tripod base stand also features long foldable legs and is ideal for the touring pro.

B. MS7701TB 72036

Telescoping Euro Boom Mic Stand This variation of the MS7701B adds a telescoping boom arm to provide the right boom length for any application.

MS7700B / MS7701TB Height Adj.: 36-64”Base Spread: 23”MS7701TB - Boom Length: 19-33”

C. MS9700B + 56983

Heavy-Duty Tripod Base Mic Stand This heavy-duty stand is built to last! It features a solid steel upper shaft, ergonomically designed and anodized cast aluminum center clutch, steel leg housing with adjustable heavy-duty leg mounts, and a scratch resistant finish. A patent-pending anti-rotational device on the lower shaft allows for true one-handed height adjustments.

E. MS9701TB+ 56985

Heavy-Duty Tele-Boom Mic Stand Same as MS9701B+, but with a 19-30” tele-boom and added safety stopper.

MS9700B+ / MS9701B+ / MS9701TB+ Height Adj.: 36-64”Base Spread: 24” MS9701B+ - Boom Length: 30”MS9701TB+ - Boom Adj.: 19-30”

|DISPLAY|The MS7701B/C and MS9701TB are available with color POP displays (at right), making them immediately accessible in the store...a benefit for dealers and consumers alike.

A.

B.

MPROVEDDESIGN

MPROVEDDESIGN

MPROVEDDESIGN

NEWfor

2010

NEWfor

2010

16

On-Stage Stands® |

Other Features for MS7625:A spring-loaded plunger and patented anti-rotation design are featured on the MS7625B.

HEX-BASE® MICROPHONE STANDS

A. MS7600B 28262

Hex-Base® Mic Stand The Hex-Base® is a unique OSS concept. Rubber feet at each of the six corners distribute the weight over a wide footprint, yet leave plenty of room on stage, combining the best features of tripod and round base stands. A super stable, space saving design.

Height Adj.: 33-61”Base Spread: 11.5”Base Weight: 8 lbs.

C. MS7625PG 35893

Pistol Grip Hex-Base® Quarter-Turn Mic Stand Same as MS7625B, but includes a patented pistol grip clutch on the top of the stand for easy one-handed height adjustments. ◄--- |DISPLAY| MS7625B / MS7625PG Height Adj.: 33-61”Base Spread: 11.5”Base Weight: 9 lbs.

B . MS7625B 29664

Hex-Base® Quarter-Turn Threadless Mic Stand This revolutionary threadless stand brings an end to the seemingly eternal chore of screwing your microphone stand into your base. In one swift motion, just push down and turn the shaft one-quarter clockwise to lock, or push down and turn one-quarter counter-clockwise to remove. The uniquely shaped 9lb. base on this patented item means more room for foot placement. The low profile design makes for an especially stable stand. C.

A.

B.

A. MS7201B 72030

Round Base Mic Stand, Black An industry standard! The 7lb. sand-cast base is sturdy enough for road abuse yet light enough to carry. This black powder coated stand sports a die-cast zinc clutch and is also available with a chrome shaft (MS7201C ). B. MS7201C 72035

Round Base Mic Stand, Chrome Same design as the MS7201B, but with a chrome shaft.

MS7201B / MS7201C Height Adj.: 33-60”Base Diameter: 10”Base Weight: 7 lbs. C. MS7201QRB 72005

Quik-Release™ Round Base Mic Stand This round base variation features a patented spring-loaded clutch trigger for fast two-handed operation.

Height Adj.: 34-62”Base Diameter: 10”Base Weight: 7 lbs.

Our patented HEX-BASE® is constructed from 9 lbs. ofsheet metal and is designed to eliminate movementwhen the user steps on the base for unwavering support.

Underside of Base

ROUND BASE MICROPHONE STANDS

The ergonomically designed patented Pistol Grip clutch fits perfectly in the palm of your hand for easy one-handed height adjustments.

1717


171717

D. MS7250 35460

Dome Base Microphone Stand Thanks to the improved low profile design and the multiple rubber feet, this stand will not wobble or tip! This stand also comes complete with a die-cast zinc clutch and a black powder coat finish.


E. MS7255PG 35892

Pistol Grip Dome Base Mic Stand Use only one hand to adjust the height or unscrew your clip! The anti-rotation feature means never holding the lower shaft to prevent loosening from the base. Oversized threading means it takes only seconds to assemble or disassemble this stand! Just turn the shaft clockwise to lock, and simply step on the foot pedal and turn counter-clockwise to release. Includes a pistol grip clutch for one-handed quick and easy height adjustments.


A.

B.

This patented Quik-Release™feature allows for fast and easy height adjustments.

The improved low profile patented design and 8 rubber feet keep the stand sturdy, so the mic will never knock you in the face.

C.

D.

E.

The ergonomically designed patented Pistol Grip clutch fits

perfectly in the palm of your hand for easy one-handed

height adjustments.

|DISPLAY|Set up eye-catching custom displays with any of the MS7201 Round Base Mic Stands and make them immediately accessible in your store.

1. 2. 3.

18

On-Stage Stands® |

18 STUDIO BOOMS

SMS7650 72040

Hex Base® Studio Boom The Hex-Base® Studio Boom is the new standard by which others will be judged. It is equipped with 2 straight boom shafts for studio, project, or live work. The short boom is removable, while the primary boom arm slides effortlessly through the 1” square housing and locks with a tension knob. Boom angle adjusts with a 40-tooth clutch. The 17lb. patented base is a step above the rest as it provides a low center of gravity, giving it stability even when moved. Includes removable casters.

Boom Length: 82” w/ 7” arm extensionHeight Adj.: 40-82”Base Spread: (without casters): 18” (with casters): 24”Base Weight: 17 lbs.Total Stand Weight: 40 lbs.

SMS7630B 34976

Hex-Base® Studio Stand withTelescoping Boom, Black This heavy-duty studio stand is the first of its kind to combine an internal air suspension system with a boom and offer either rubber feet or casters. The 17 lb. Hex-Base® brings superior stability to this stand.

SMS7630C 34932

Hex-Base® Studio Stand withTelescoping Boom, Chrome Same design as the SMS7630C, but with a chrome shaft.

SMS7630B / SMS7630C Boom Length: 32-49”Height Adj.: 42-70”Base Spread: (with out casters): 18” (with casters): 24”Base Weight: 17 lbs.

SB9600 29825

Tripod Studio Boom Our most affordable and most stable studio boom combines a tripod base, two straight boom shafts, and a 7” mini boom extension into one mean microphone support machine. With fold-and-go convenience and steel tubing, this is a great item for any budget!

Boom Length: 82” w/ 7” arm extensionHeight Adj.: 44-80”Base Spread: 32-48”

SB96+ 35060

Studio Boom This stand includes nearly everything you need for starting a studio project. At its core is a telescoping vertical shaft and an extra long telescoping boom with a solid steel counterweight. The 40-tooth boom clutch means non-slip locking power. Added to the end of the boom is a Posi-Lok™ mini-boom arm. The four locking folding legs and attached locking casters make for a remarkably stable foundation. The entire stand folds for travel. This studio boom can be taken anywhere!

Boom Length: 43-79” w/ 7” arm extensionHeight Adj.: 45-76”Base Spread: 34”

Other Features for SMS7650:1. 7 lb. Sliding counterweight w/ locking threaded knob.2. 3 Telescoping shafts w/ 2 large friction knobs.3. Solid steel lug connects shaft to base.

Other Features for SB96+:The folding, locking legs on the SB96+ are ideal for the traveling musician.


191919ALL-IN-ONE MIC PAKS MIC / MIC STAND BAGS

MS7510 34500

Microphone Pro-Pak (AS400) The Microphone Pro-Pak offers musicians the gear they need to plug in and start rocking! Great for beginners or pros, this pak is perfect for just about anyone eager to have their voices heard. Available with choice of microphones.

Pak includes:(1) Tripod boom stand Height Adj.: 36-58”(1) MY200 mic clip(1) 20 ft. XLR-XLR cable(1) AS400 dynamic handheld microphone

MS7520 34659

Microphone Pro-Pak (AS420) Same as MS7510, but with AS420 dynamic handheld microphone.

MS7515 40873

Microphone Pro-Pak for Kids Perfect for kids of all ages and sizes! Whether they’re just testing out their vocals at home, or they’re going to be an ON-STAGE Professional, the Mic Pro-Pak for Kids includes the gear they need to plug in and have their voices heard.

Pak includes:(1) Tripod boom stand Height Adj.: 30-50”(1) MY200 mic clip(1) 20 ft. XLR-QTR cable(1) AS400 dynamic handheld microphone

|DISPLAY| ---► Both the MS7510 and MS7520 Pro-Paks are available with the color POP displays shown above, making them immediately accessible in the store...a benefit to dealers and consumers alike.

MSB-6500 35541

Microphone Stand Bag Heavy-duty nylon bag fits either 3 round bases, 3 hex-bases or a combination of both, plus the shafts and booms. Features a heavy-gauge 2-pull zipper, so the bag can be unzipped lengthwise from the center. Two hand straps ensures a well-balanced load and the deluxe corded piping gives the bag its rigid shape.

Dimensions: (l)36.125 x (w)12.625 x (h)3.75”Material: Heavy-duty padded nylonColor: Black

MB7006 56866

6-Space Microphone Bag On-Stage Gear Microphone bags make protecting and transporting your valuable microphones easier than ever. This fully padded bag encases a dense foam insert to accommodate most popular handheld mic designs, while a separate compartment with a removable hook-and-loop divider provides room for cables and clips. An additional zippered mesh pocket incorporated into the lid is perfect for storing sheet music or similar items. Bag can be carried using a top carry handle or the removable, adjustable shoulder strap.

Dimensions: (l)15 x (w)11.5 x (h)10”Materials: Nylon, Pearl-Cotton, FoamColor: Black

NEWfor

2010

NEWfor

2010

20

On-Stage Stands® |

20 DESKTOP STANDSHENNESSEY™ MASTER’S SERIES

DS7100B 34357

Basic Fixed-Height Desktop Stand, Black This basic stand has become the standard for broadcast pros! It features a solid sand-cast base with five rubber feet to add stability. The removable shaft is available with a black powder coat (DS7100B) or chromefinish (DS7100C). DS7100C 34358

Basic Fixed-HeightDesktop Stand, Chrome Same as DS7100B, but with chrome shaft.

DS7100B / DS7100C Height: 4”Base Spread: 6”Base Weight: 2 lb.

DS7200B 79000

Adjustable HeightDesktop Stand , Black This stand includes a die-cast steel clutch. The removable shaft is available with a black powder coat (DS7200B) or chrome finish (DS7200C). DS7200C 74030

Adjustable HeightDesktop Stand, Chrome Same as DS7200B, but with chrome shaft.

DS7200B / DS7200C Height Adj.: 9-13”Base Spread: 6”Base Weight: 2 lb.

DS7200QRB 79060

Quik-Release™ AdjustableDesktop Stand This slick little stand features a Quik-Release™ clutch trigger for instant two-handed operation.

Height Adj.: 9.5-16”Base Spread: 6”Base Weight: 2 lbs.Color: Black

DS300B 6515

Posi-Lok™ Mini BoomDesktop Stand The innovative Posi-Lok™ clutch on this stand features 52-locking teeth and an ergonomic knob. The 7” mini boom is perfect for announcement, paging, dispatch and courthouse use.

Boom Length: 7”Base Spread: 6”Base Weight: 2 lbs.Color: Black

DS6213 55915

Gooseneck Desktop Stand This Gooseneck Desktop Microphone Stand makes mic adjustments quiet and effortless, while the die-cast U-shaped base saves on valuable desk space. The removable gooseneck features 5/8” - 27 threading on both ends.

Neck Length: 13”Color: Black base; black gooseneck

DS7425 51337

Tripod Desktop Stand This lightweight, folding desktop stand is the perfect solution for podcasting or portable tabletop miking needs. Its tripod design minimizes the pickup of surface noise. Includes a durable mic clip compatible with all popular handheld microphone designs.

Height Adj.: 4.3-6.7”Base Spread: 7.5”Color: Black base; chrome shaft

Hennessey Master’s Series Executive Desktop Mic Stand These stands are fit to sit front-and-center at formal conferences and large meetings! Beauti-fully made, they feature weighted rosewood bases, solid brass extension arms, and 24K gold plated mic clip adapters. Their easy-to-use adjustment levers mean no awkward fumbling in front of guests. A merger of elegant design and professional performance.

Dimensions: 4.25 x 8”

WDS100G 49614 Rosewood Base, Gold-Plated Extension Arm

WDS100BA 50349 Rosewood Base, Brushed Aluminum Extension Arm

WDS100GM 50351 Rosewood Base, Gun Metal Extension Arm

WMB100 40849

Hennessey Master’s Series WOOD Microphone Box This hand-crafted condenser microphone box makes for a perfect showcase in your home, office or studio! It features a high gloss varnish coat over a rosewood finish. Brass plated hardware compliments the box color nicely. A foam insert securely holds Shure, EV and more than 25 other condenser microphone models.

Dimensions: (l)11 x (w)5 x (h)3”


212121INSTRUMENT MIC STANDS / BOOM COMBOS MIC BOOMS

MS7311B 72020

Kick Drum/Amp Mic Stand A heavy, casted tripod base gives this stand the stability of muchlarger models, while its compact shape makes for easy positioning in those tight spaces on stage.

Boom Length: 17.5”Height Adj.: 14-22”Base Spread: 11” Color: Black Powder Coat Finish

MS7920B 37630

Bass Drum/Boom Combo Stand This variation of the MS7311B features a “U” shaped base instead of the heavy tripod design, allowing for placement in the tightest of spaces.

Boom Length: 16”Height Adj.: 8-14”Base Spread: 4.5-7.5” Color: Black Powder Coat Finish

MS7411B 79010

Drum/Amp Tripodwith Boom This compact utility stand is built to last! The MS7411B features a folding tripod base, die-cast steel height adjustment clutch, all metal boom clutch, and a steel boom with metal counterweight.

Boom Length: 19”Height Adj.: 17-27”Base Spread: 26”Color: Black Powder Coat Finish MS7411TB 51713

Drum/Amp Tripod with Tele-Boom Same design as the MS7411B, but with telescoping boom.

Boom Length: 20-36“Height Adj.: 17-27”Base Spread: 26”Color: Black Powder Coat Finish

Other Features for Mic Booms:Booms in the MSA7020 and MSA7040 series feature interlocking neoprene rubber teeth that provide maximum grip. The die-cast steel construction and locking washer secure the boom in any position.

MSA7020B 76030

Top Mount Boom Professional non-telescoping boom. Length: 35”.

MSA7020TB 76045

Top Mount Telescoping Boom A telescoping boom with separate euro-style knobs. Adjusts from 32-48”.

MSA7040B 76050

T op Mount Euro-Style Boom Professional non-telescoping boom with deluxe chrome washer. Length:16”.

MSA7040TB 76060 MSA7040TC 76065

Top Mount Telescoping Boom Professional telescoping boom with deluxe chrome washer. Available in black (MSA7040TB) and chrome (MSA7040TC). Length: 19-32”.

MSA9720B 34754

Platinum Series Boom Arm Professional all-steel non-telescoping boom. Length: 32”.

MSA9720TB 35454

Platinum Series Tele-Boom Arm Professional all-steel telescoping boom. Length: 19-30”.

MSA8020B 40904

Clamp-On Boom Arm Add on extra microphones without over-crowding your space with more stands! This clamp-on boom arm is perfect for miking your drums or other instruments. The heavy-duty clamp will securely attach to any of our microphone stands and most other standard designs. Length: 19”.

|PACK| ---►Our award-winning packaging is eye-catching and acts as a “silent salesperson” describing all of the features of the product!

22

On-Stage Stands® |

22 ACCESSORIES

Goosenecks Solid steel male and female threaded ends. The flexible neck is made from interlocking rolled metal.

ASVS4-B 6168

4” Pop Blocker Prevent annoying vocal thrusts with this adjustable clip-on voice screen.

ASVS6-B 6191

6” Pop Blocker Same as ASVS4-B, but with a 6” voice screen.

ASVS6-GB 28670

Pop Blocker withClamp & Gooseneck Our improved Pop Blocker connects easily to any mic stand or boom with an “Easy Grip Clamp” and V-shaped bracket attachment that fits onto any shaft up to 7/8” diameter. Includes 6” extension bar and 13” steel gooseneck.

ASFSS6-GB 51286

Dual-Screen Pop Blocker A new pro-level Dual-Screen Pop Blocker that removes unwanted “P’’ and “B” plosives by providing open space between the two screens. The first screen diffuses the air burst that causes plosive consonants; the open space between the screens disperses air pressure; and the second screen diffuses the air again and removes remaining plosive sounds. The 11.5” gooseneck is constructed from coated brass and allows for precise positioning of the Pop Blocker between you and your mic.

MSA9504 6116

Posi-Lok™ Mini-Boom 19” This boom extension is the longest in the Posi-Lok™ line.

MSA9505 6119

Posi-Lok™ Telescoping Mini-Boom The Telescoping Mini-Boom offers the most flexibility of all the Posi-Lok™ booms. It has the same features as the 7” Posi-Lok™ boom, but adds a 9-16” telescoping arm.

MSA9508 6122

Posi-Lok™ Side Mount Boom A must-have for instrument miking! The adjustable side mount boom grips to any round shaft. Features a 7” Posi-Lok™ boom.

MSA9500 6073

Posi-Lok™ Mic Boom System The essential pack for anyone responsible for the set up of microphones. System includes:(1) Posi-Lok™ Clutch(2) Connectors(1 ea.) 7”, 13” and 19” boom attachments

MSA9501 6114

Posi-Lok™ Clutch The center piece of the Posi-Lok™ system comes complete with two 52-teeth disks that rotate 300 degrees and grip together. Features an ergonomic adjustment knob.

MSA9502 6112

Posi-Lok™ Mini-Boom 7” This versatile boom is designed specifically for miking those hard to reach places, such as drums or percussion. MSA9503 6113

Posi-Lok™ Mini-Boom 13” Like the MSA9502, but with a 13” boom extension. (not shown).

A. MSA9030-06B 6571 6” Gooseneck, black MSA9030-06C 6570 6” Gooseneck, chromeB. MSA9030-13B 6576 13” Gooseneck, black MSA9030-13C 6575 13” Gooseneck, chromeC. MSA9030-19B 60315 19” Gooseneck, black MSA9030-19C 60314 19” Gooseneck, chrome

SP58 29752

Steel Mesh Mic Grille This durable wire mesh grille features die-castzinc sphere retainer rings, and an inner foam filter to reduce wind and breath “pop” noises. Standard thread size fits most brand nameball-shaped dynamic microphones.

Other Features for Posi-Lok™ System:The Posi-Lok™52-teeth design gives you the versatility to create your own mic angle techniques. No other microphone support system combines compact size and locking support at any angle like Posi-Lok™!

Windscreens Foam windscreens fit most standard mics. Other colors available upon request.

ASWS58-B 6185 Black

ASWS58-R 6186 Red

ASWS58-BL 6187 Blue

A. B. C.


232323

MY101 53694

Conductor Stand Mic Clip Designed to attach to conductor stands with two wingnut screws. The heavy-duty rubber clip is nearly unbreakable and stretches to accommodate a wide range of microphone models. Perfect for rehearsals and performances alike.

CM01 77023

Video Camera / Digital Recorder Adapter Now every band with a video camera and mic stand can create professional videos of their live performances! Attach this innovative adapter to any 5/8” 27-threaded mic stand/boom to support a video camera or digital recorder with standard ¼” threaded female inserts. Can also be used for conference/presentation recording, school play/concert recording, or even with a classroom projector. The adapter’s ball-head allows for independent pan and tilt with 360° pan movement and 180° tilt.

A. A.B. B.C. C.

D. D.E. E.F. F.G.

H. H.I. G.J.

Mic ClipsA. MY100 6154 Dynamic Rubber Mic ClipB. MY110 6101 Wireless Rubber Mic ClipC. MY120 29574 Rubber Condenser Mic ClipD. MY200 29944 Clothespin-Style Plastic Mic ClipE. MY250 6106 Euro-Style Plastic Mic ClipF. MY251 29936 Elliptical Mic ClipG. MY252 29937 Condenser Mic Clip

H. MY320 56842 Condenser Shock-Mount Mic Clip

I. MY325 56731 Dynamic Shock-Mount Mic Clip

J. MY330 56843 Wireless Shock-Mount Mic Clip

Compatible with our SM7211B and SM7611B Conductor Stands.

Convert any mic stand into an audio/video stand and record just like a pro! Mic stand shown with two CM01’s and MY550.

Mounts & AttachmentsA. MY410B Studio Microphone Shock Mount 29946 Fits large diaphragm condenser mics (42-48mm diameter), black.B. MY410CG Studio Microphone Shock Mount 48718 Same as MY410B, champagne finish.C. MY420 Studio Microphone Shock Mount, black 48574 Fits most pencil-style condenser mics, most dynamic or condenser handheld mics, and some cylindrical shaped ribbon mics.D. MY500 Stereo Mic Attachment Bar 6151 Holds up to three microphones.E. MY550 Mic Extension Attachment Bar 6149 6” Extension attachment bar.F. MY570 Clamp-On Accessories Holder 6147 90° Attachment piece measures 3 x 3.5”.G. MY700 Deluxe Stereo Mic Attachment Bar 29665 Holds up to six microphones.H. MSA5050 Clamp-On Drink Holder 49980 Neoprene rubber material keeps your drinks hot/cold and will also prevent condensation from dripping on your equipment. Cup diameter adj.: 3-3.25”.

A. QK2-B Quik-Clip, black 6111 B. QK2-C Quik-Clip, chrome 6103 C. QK10-B Quik-Release Mic Adapter 35456 D. DM01 Drum Rim Mic Clip 34981 E. DM50 Drum Rim Mic Clip 29904 F. TM02B Flange Mount, black 6089 G. TM02C Flange Mount, chrome 6088 H. TM08B Flange Mount, black 34746 I. TM08C Flange Mount, chrome 34759 TM08B/C features 3mm bottom shock padJ. PC304 Straight Pedal Coupler 34735 K. PC305 Offset Pedal Coupler 34736 L. MA100 Mic Screw Adapter 6100 M. MA200 Mic Screw Adapter 6102 N. MA300 Mic Screw Adapter 29974 O. TM03 Table Mic Clip 29935 P. CW6 6 lb. Counterweight 35453 Q. CW3 3 lb. Counterweight 98067

TM01 52962

Microphone Table/Stand Clamp The clever design of the TM01 allows it to be mounted horizontally or vertically, on round or flat surfaces. It quickly and securely attaches to microphone stands, cymbal stands, boom arms, and tables. It’s great for miking an acoustic guitar while singing, or getting a drum mic into a tight spot.

A. B.C. D.

E.

J.

F.

K.

G.

H.I.

L. M.N. O. Q.

P.

MPROVEDDESIGN

MPROVEDDESIGN

MPROVEDDESIGN

1. 2.

2424

On-Stage Stands® |

24 CLASSIC SERIES

KS7190 28126

Classic Single-X Keyboard Stand Many of today’s musicians like things simple and affordable. That’s why we continue to offer this popular Single-X with its classic bullet-nose pull knob and upgraded, stronger 1” square tubing.

Applications: Small-format keyboardsTubing: 1”Weight Capacity: 90 lbs.Height Adj.: 27-38“Base Spread: 11-31“Construction: Bolted, Assembly Required

KS7191 28613

Classic Double-X Keyboard Stand This stand uses the same tried-and-true bullet-nose knob as the Classic Single-X, but the all-welded Double-X workhorse adds stability and holds more weight.

Applications: Medium-format keyboardsTubing: 18mmWeight Capacity: 200 lbs.Height Adj.: 27-39“Base Spread: 11-31”Construction: All-welded

KS8190 29979

Lok-Tight Classic Single-X Same as KS7190, with Lok-Tight construction.

Applications: Small-format keyboardsTubing: 15 x 30mmWeight Capacity: 100 lbs.Height Adj.: 27-38“Base Spread: 11-31“Construction: Lok-Tight

KS8191 29980

Lok-Tight Classic Double-X Same as KS7191, with Lok-Tight construction.

Applications: Medium-format keyboardsTubing: 18mmWeight Capacity: 200 lbs.Height Adj.: 27-39“Base Spread: 11-31”Construction: Lok-Tight

Classic Series Other Features:1. Classic bullet-nose pull knob and 5-position disk make for simple width and height adjustments.2. Adjustable rubber arm sleeves can be positioned to fit virtually any keyboard depth.

LTLTLTLT

1. 2.


252525ERGO-LOK™ SERIES quikSQUEEZE™ SERIES

KS7290 73210

Pro Single-X ERGO-LOK™ System Our top-of-the-line Single-X is designed with strength and comfort in mind. This pro-level model features the heaviest tubing we have in our arsenal and is built with an ergonomic trigger, internal rod mechanism, and solid-steel spring-loaded deadbolt.

Applications: Large-format keyboardsTubing: 30mmWeight Capacity: 275 lbs.Height Adj.: 27-38”Base Spread: 12-32”

KS7291 73200

Pro Heavy-Duty Double-X ERGO-LOK™ System The high-end Double-X is built for the most demanding of musicians. The ERGO-LOK™ technology, same hefty tubing as the KS7290, and double-X frame make this rugged stand a force to be reckoned with.


KS8290 29983

Lok-Tight Pro Single-X ERGO-LOK™ System Same as KS7290, with Lok-Tight construction.


KS8291 29984

Lok-Tight Pro Double-X ERGO-LOK™ System Same as KS7291, with Lok-Tight construction.


KS7390 73011

quikSQUEEZE™ System Single-X The quikSQUEEZE™ exemplifies innovation. Adjusting the keyboard is easy as a squeeze, and the steel reinforced clutch holds more weight while keeping your keyboard safe. Applications: Medium-format keyboardsTubing: 15 x 30mmWeight Capacity: 120 lbs.Height Adj.: 27-39“Base Spread: 11-30” KS8390 29981

Lok-Tight quikSQUEEZE™ System Single-X Same as KS7390, with Lok-Tight construction.

Applications: Medium-format keyboardsTubing: 15 x 30mmWeight Capacity: 120 lbs.Height Adj.: 27-39“Base Spread: 11-30”

ERGO-LOK™ Other Features:1. The patented ERGO-LOK™ Technology utilizes an ergonomic trigger, an internal rod mechanism and a solid-steel spring-loaded deadbolt assembly.2. Simply squeeze the ergonomic trigger to disengage the clutch, position the stand at any of its five convenient height adjustments, and release the trigger to reengage the clutch.

quikSQUEEZE™ Other Features:Patented quikSQUEEZE™ technology features a 5-position adjustment disk, steel-reinforced clutch, and steel center hinge.

Lok-Tight Construction All stands in the KS8000 Series feature Lok-Tight construction, which means that they have the strength of welded construction but also feature the patent-pending bolt system.

A metal sleeve is welded to every Lok-Tight member. This sleeve locks onto the stand which gives Lok-Tight its strength! And, because they lock together, these keyboard stands come unassembled in considerably smaller boxes than welded stands so the cost and storage savings are yours!

LTLT LTLT

LTLT

KS8391 29989

Lok-Tight quikSQUEEZE™ System Double-X Capable of securely supporting up to 200 lbs. and easily adjustable thanks to the no-fuss, patented quikSQUEEZE™ adjust-ment system. This stand makes setup and performance a breeze.

Applications: Medium-format keyboardsTubing: 18mmWeight Capacity: 200 lbs.Height Adj.: 27-39“Base Spread: 11“-30”Construction: Lok-Tight

LTLT

LTLT

1. 2.

On-Stage Stands® |

26 PLATFORM FOLDING-Z STAND SERIES

Other Features for KS7365-EJ:1. Height positions with line-it-up adjustment marks.2. Arms and feet swing into place or fold for storage.

Other Features for KS7150:Telescoping platform adds versatility and adjusts from 29-43.5”.

KS7491 40504

Pro Heavy-Duty Double-Xwith 2nd Tier The new top-of-the-line double-X with 2nd Tier from On-Stage Stands is ideal for professional musicians! This pro-level model features heavy-duty 30mm square tubing for the frame and support arms/feet. Features an ergonomic top trigger, internal rod mechanism, as well as a solid-steel spring-loaded deadbolt. The included 2nd tier is height and angle adjustable with easy-to-use line-it-up positions.

Applications: Large-format keyboards (88-key)Tubing: 30mmWeight Capacity: 320 lbs.Weight Capacity, 2nd Tier: 75 lbs.Height Adj.: 26.5-39.5”Height Adj., 2nd Tier: 4-12” (above 1st tier)Base Spread: 13-33”Construction: All-welded

KS7365-EJ 29886

Pro Heavy-Duty Folding-Z with 2nd Tier Truly professional. Truly heavy-duty. This stand allows for independent height and width adjustments and can hold 2 keyboards, yet folds into a space smaller than most keyboard cases. It was created with the help of some of the most discriminating keyboard professionals in the world, and now any musician can get onstage with this impressive stand!

Applications: DJ, Mixer and KeyboardsIndependent Height & Width Adjustments:

Stand Height Adj.: • 28-36”Stand Width Adj.: • 21-37”First Tier Depth: • 16.5”

2nd Tier Adjustment Features:Height Adj.: • 5”-12” (above first tier)2• nd Tier Angle Adj.: 10° increments2• nd Tier Depth: 16.25”

Construction: All-weldedStructural Tubing: • 1” x 2”Center Box Tubing: • ¾”Weight Capacity: • 400 lbs.Weight Capacity, 2• nd Tier: 60 lbs.Padding: • Black Velveteen Rubber

KS7150 35856

Platform Style Keyboard Stand An extremely strong stand! This fully adjustable model is a great choice for musicians who need support for large keyboards, heavy vintage electric pianos or DJ gear. The KSA7500 Universal 2nd Tier unit can be attached, making this a 2-tier stand!

Applications: DJ, Mixer and KeyboardsWeight Capacity: 230 lbs.Height Adj.: 26-43”Width Adj.: 29-43.5”Depth: 12.5”Folded Dimensions: (w)12.625 x (l)29 x (d)3.5”Construction: Welded and bolted

The first platform keyboard stand t hatfolds flat! Folding legs are ideal forstorage and travel.

1. Second Tier is removable. Features tilting angle adjustment and independent height adjustments.

2. Box beam allows for easy width adjustments and at the same time adds the stability needed to support up to 400 lbs.

Carry-all-design . . . stand base breaks down into three lockable sections.

1.

2.

The first platform keyboard stand that folds flat! Folding legs are ideal for storage and travel.


27KEYBOARD STAND ATTACHMENTS

KSA7550 42000

Professional 2nd Tier With its internal-locking mounting attachment, the KSA7550 converts your Folding-Z into a 2-tier stand. This height adjustable, tilting tier also adjusts its width along with the stand’s. For use only with the KS7350 Folding-Z Stand.

Applications: Multiple keyboardsWeight Capacity: 60 lbs.Height Adj.: 9-14”Angle Adj.: Up to 30º

KSA8000 53972

Deluxe Universal 2nd Tier An On-Stage Stands original! This versatile 2nd Tier can fit virtually any keyboard stand with a universal mounting attachment, fitting 1” and 30mm round or square tubing. Two set of 14” support arms feature independent width adjust-ments to accommodate keyboards, laptops and/or other DJ equipment. The Posi-Lok™ design adjusts and locks the support arms in 10° increments, while the telescoping stabilizer bar adjusts with the width of any stand up to 31”. Includes KSA100 End Caps.

Applications: Multiple keyboards; Mounting laptops and/or other small DJ equipment.Weight Capacity: 65 lbs.Support Arm Length: 14”Height Adj.: Notches at 12”, 13.5” and 15”Width Adj.: 17.5-31” Mounting: 1” or 30mm round or square tubing

KS7350 28856

Pro Heavy-Duty Folding-Z Think VERSATILITY! Only this compact stand can hold 375 lbs., allow for independent height and width adjustments, and fold for easy storage. The unique Z-frame allows playing from either side and can be broken down and locked together for transport. This model can hold 55-key keyboards in the compact position and up to 88-key keyboards at its maximum width.

Applications: DJ, Mixer and KeyboardsStructural Tubing: 1 x 2“Center Box Tubing: ¾”Weight Capacity: 375 lbs.Height Adj.: 24-38“Telescoping Width Adj.: 21-36“Construction: All-welded

KSA100 54445

Keyboard Stand “Cork-Style” End Caps These rubber “cork-style” end caps make converting your keyboard stand between single and double tiers easy! They plug into round or square tubular support arms on all brands of X-style keyboard stands. A great complement to the KSA7500, KSA7550 and KSA8000 2nd Tier Units, and KSA7575 Adapter. They also make an ideal replace-ment for broken or misplaced end caps. Come complete with attached lanyard.

Mounting: 1” or 30mm round or square tubing Construction: Durable, flexible rubber; Nylon cord

The Posi-Lok™ design adjusts and locks the angle of the 2nd tier in 10 ° increments.

Square clamp design allows for threedifferent positions: 1. Closest to the player 2. Raised to maximum height 3. Farthest from the player

NEWfor

2010

NEWfor

2010

1.

2. 3.

KSA7500 34047

Universal 2nd Tier With its universal mounting attachment, this tilting tier should be everyone’s first choice for adding multiple keyboards to most hollowframe keyboard stands. This universal unit can be stacked on top of a 2-tier stand... making it a 3-tier stand! KSA100 End Caps now included.

Applications: Multiple keyboardsWeight Capacity: 60 lbs.Mounting: 1” or 30mm round or square tubing

KSA7575 35194

Universal Keyboard Mic Attachment Bar Insert this mounting attachment bar into any keyboard stand with 1” or 30mm round or square tubing. Then, attach any boom, clip or microphone and you are ready to mic your keyboard vocals! KSA100 End Cap now included.

Applications: Keyboards vocalsWeight Capacity: 10 lb. Load Mounting: 1” or 30mm round or square tubing

NEWfor

2010

NEWfor

2010

1. 1.2. 2.

On-Stage Stands® |

28 KEYBOARD BENCHES & BAGSA-FRAMES

Other Features:1. Legs fold flat for storage and travel.2. Foam cushion meets all state regulations and is 100% compliant.

Other Features for A-Frames:1. Support bars slide and rotate. Also allows for two fixed sliding front and back positions.2. Hinged legs allow stand to fold for easy storage and portability, and the double-lock feature adds support and security.

KT7800 55439

Three-Position X-Style Bench This Three-Position X-Style bench is affordable and perfect for fold-and-go use. Its all-purpose appeal makes it a no-brainer for those looking to buy a basic bench for gigs, the studio or home. KT7800+ 55438

Deluxe X-Style Bench Our top-of-the line keyboard bench has no equal! The design combines a 3” cushion, providing extra comfort for hours of play, with a spring-loaded double deadbolt locking system, providing extra safety for peace-of-mind.

KS7902 29784

A-Frame Keyboard Stand This versatile A-frame keyboard stand lets you adjust the height and angle of your keyboards until they are just right for playing, whether you are standing or sitting. This lightweight, easy to carry, 48” wide stand is an outstanding value for anyone with a multi-keyboard setup.

KS7903 29785

3-Tier A-Frame Keyboard Stand S ame design as the KS7902, but adds a 3rd tier for even more keyboards and versatility.

KS7902 / KS7903 KS7902 Applications: Dual KeyboardsKS7903 Applications: Multiple KeyboardsWeight Capacity: 88 lbs. per tierHeight Adj.: 54”Construction: Bolted

KT7800 Weight Capacity: 300 lbs.Height Adj.: 18.75-20.5”Bench Seat Size: 12 x 17”Construction: All-weldedKT7800+

Weight Capacity: 360 lbs.Height Adj.: 19.5-24.5”Bench Seat Size: 12.5 x 23.5”Construction: All-welded

KB8902B 54787

Flip-Top Bench This Flip-Top Keyboard Bench is constructed from durable, quality wood. The design combines a 1.5” cushion, which provides extra comfort for hours of play, with a flip-top seat, which provides storage space for music books and other accessories. KB8802R 55522

Rosewood Keyboard & Piano Bench This new Rosewood Keyboard Bench features durable, quality wood construction and a beautiful Rosewood finish. The design combines a 1.5” cushion with strategic air vents, which provide extra comfort for hours of play. The KB8802R is an excellent choice for solid support and classic style. KB8902B Weight Capacity: 240 lbs.Height: 19.5” Cushion Thickness: 1.5”Bench Seat Size: 13.5 x 22.5“Materials: Wood and VinylColor: Black

KB8802RWeight Capacity: 240 lbs.Height: 19.5” Cushion Thickness: 1.5”Bench Seat Size: 13.5 x 22.5“Materials: Wood and VinylColor: Rosewood


29ON-STAGE GEAR KEYBOARD ESSENTIALS

KDA7061B 40976

61/76-Key KeyboardDust Cover, Black Keep your keys free of harmful dust and debris with this dust cover. Dust free spandex material stretches to fit 61/76-key keyboards. Comes complete with a built-in bag, plastic cord and locking clasp.

KDA7061G 40977

61/76-Key KeyboardDust Cover, Gray Keep your keys free of harmful dust and debris with this dust cover. Dust free spandex material stretches to fit 61-76/key keyboards. Comes complete with a built-in bag, plastic cord and locking clasp.

KDA7088B 40978

88-Key KeyboardDust Cover, Black Same design as KDA7061B, but stretches to fit 88-key keyboards. KDA7061B / KDA7088B KDA7061B Size: 61/76-key keyboardsKDA7088B Size: 88-key keyboards Material: SpandexColor: Black|PACK| ---►

KDA7088G 40979

88-Key KeyboardDust Cover, Gray Same design as KDA7061G, but stretches to fit 88-key keyboards.

KDA7061B / KDA7088B KDA7061G Size: 61/76-key keyboardsKDA7088G Size: 88-key keyboards Material: SpandexColor: Gray|PACK| ---►

KSP100 42808

Keyboard Sustain Pedal A full size piano-style pedal that is perfect when you need a sturdy and responsive control over sustain! This high-quality pedal features a polarity switch making it compatible with virtually any keyboard. The heavy-duty spring allows for better control and durability. Compatible with any electronic keyboard with a ¼” sustain jack, including Yamaha, Casio, Korg, Roland and MORE!◄--- |PACK|

KSP20 52316

Keyboard Sustain Pedal A versatile universal sustain pedal with a built-in 6’ cord and polarity switch. The KSP20 is compatible with any electronic keyboard with ¼” sustain jack. The rugged design features a built-in tread on top and four rubber feet on the bottom.

KSB-6500 35539

Keyboard Stand Bag A must for every roadie, this rugged heavy-duty bag is made with padded nylon and includes two hand straps for a well-balanced load. Two internal velcro straps hold support bars and other frame components. Also comes with a two-pull zipper, so the bag can be unzipped length-wise from the center. Deluxe corded piping gives the bag its rigid shape. Holds any of the following models: KS7350, KS7365-EJ, KS7150.

Dimensions: (l)30 x (w)16 x (d)8.75”Color: Black

30

On-Stage Stands® |

30 WORKSTATIONS & ACCESSORRY PARTS

WS8700 40493

Professional Workstation This rugged computer workstation is designed with all the support you need for home recording and studio project work. The WS8700 is constructed from heavy-duty steel to handle all of your keyboard/computer gear. The Z-frame allows for independent height and width adjustments, while all 4 platforms elevate and swivel to suit any user’s needs.

Tubing: 1 x 2”Weight Capacity: 198 lbs.Weight Capacity, 2nd Tier: 88 lbs.Height Adj.: 27.5-38”Height Adj., 2nd Tier: 8-14” above standPlatform Height Adj.: 4-18”Width Adj.: 30-37”Platform Swivel Range: 180ºConstruction: All-steel

A1/A2. (2) Computer monitor platforms B1/B2. (2) Near-field monitor platforms C. Height adjustable 2nd tier holds 61/76-key keyboards D. Keyboard platform holds 76/88-key keyboardsE. Computer keyboard/mouse tray features a sliding pullout component F. Computer platformG. 6U Rack space

A1. A2.

B1. B2.

C.

D. E.

F.G.

31


31

WS7500RB 49978

Wood Workstation, Rosewood/Black Steel Two compact and attractive Workstations that are perfect for the home studio! These workstations are ergonomically designed for maximum comfort and work efficiency. The rectangular steel tube frame is sturdy enough to support all of your computer/keyboard gear, while the compact Z-frame and slide-out keyboard tray keep your set-up clean and sleek. The WS7500RB features Rosewood laminate surfaces and a black steel frame .

WS7500MG 50665

Wood Workstations, Maple/Gray SteelSame design as WS7500RB, but with Maple wood laminate surfaces and gray steel frame.

WS7500RB / WS7500MG WS7500RB Color: Rosewood/Black SteelWS7500RB Color: Maple/Gray Steel Tubing: 1 x 1”; 1 x 2” on horizontal floor legsWeight Capacity: 176 lbs.Keyboard Tray Height: 25“Platform Height: 29“Top Platform Height: 37.5” Dimensions: (w)43 x (h)37.5 x (d)30”Keyboard Tray Dimensions: (w)27 x (d)15.25”when pulled out, usable space - (w)27 x (d)9.5”Construction: Steel frame, laminate surfaces

WSC7500RB 52747

Workstation Corner Accessory This 45-degree surface can be attached to the WS7500 for added tabletop workspace. It can be attached to the left or right side, creating an efficient, wrap-around work station. The WS7500RB features Rosewood laminate surfaces and a black steel frame . WSC7500MG 52748

Workstation Corner Accessory Same design as WSC7500RB, but with Maple wood laminate surfaces and gray steel frame.

WSC7500RB / WSC7500MG Tubing: 1 x 1”; 1 x 2” on horizontal floor legsWeight Capacity: 60 lbs.Surface Dimensions: (w)23.8 x (d)26.8”Height: 25”Construction: Steel frame, laminate surfaces

WSR7500RB 52749

Rack Cabinet This 12-space rack stand provides easy access to all your rack equipment. It can stand alone, or be paired with the WS7500 or WSC7500 for additional tabletop workspace. WS7500RB features Rosewood laminate surfaces and a black steel frame . WSR7500MG 52750

Rack Cabinet Same design as WSR7500RB, but with Maple wood laminate surfaces and gray steel frame. WSR7500RB / WSR7500MG Tubing: 1 x 1”; 1 x 2” on horizontal floor legsWeight Capacity: 175 lbs.Surface Dimensions: (w)30 x (d)23.8”Height: 25”Construction: Steel frame, laminate surfaces

MPROVEDDESIGN

MPROVEDDESIGN

Both WSR7500 Rack Cabinets now come with 4 casters; 2 locking. Stand may be used with or without.

On-Stage Stands® | Call or Email Today for Pricing Information | 1.800.289.8889 | [email protected]

32 LAPTOP STANDSKEYBOARD / MIXER / DJ STANDS

WS8540 40430

Heavy-Duty T-Stand This rugged and stable stand is height, width and depth adjustable, and is perfect for multi-function use! Portable and heavy-duty, the WS8540 has everything you need for home recording, project studio work or gigging out. The entire stand folds to a compact T-shape for easy storage and transport.

Applications: Medium-format keyboards, mixers, racks, DJ coffins and speakersTubing: 30mmWeight Capacity: 300 lbs.Height Adj.: 24-37.5”Width Adj.: 16-29”Depth Adj.: 14-16.5” Construction: Steel, welded and boltedColor: Black Powder Coat Finish

LPT5000 54369

Computer Laptop Stand A light and portable stand ideal for holding your laptop, CD player/controller, EFX machine or lighting controller. It features 4 easy line-it-up height adjustments and can hold up to 8 lbs. The angled platform rests your laptop securely against the front bumpers and allows for easy viewing and working positions.

Platform Dimensions: 9.25(w) x 10.8(d)“Weight Capacity: 8 lbs.Height Adj.: 6.3-10.9”Color: Black Powder Coat Finish |PACK| ---►

WS8550 40431

Heavy-Duty T-Stand This rugged and stable stand is height, width and depth adjustable, and is perfect for multi-function use! Portable and heavy-duty, the WS8550 has everything you need for home recording, project studio work or gigging out. The entire stand folds to a compact T-shape for easy storage and transport.

Applications: Large-format keyboards, mixers, racks, DJ coffins and speakersTubing: 30mmWeight Capacity: 250 lbs.Height Adj.: 24-37.5”Width Adj.: 29”-45”Depth Adj.: 17“-27”Construction: Steel, welded and boltedColor: Black Powder Coat Finish

Innovative design allows for maximum flexibility and support, yet also folds down into one compact unit!

1. Unique spider frame design adjusts the width and depth to allow for max support.

2. Folds into a compact T-shape for storage and travel.

1.

2.

LPT600056861

Multi-Purpose Laptop Standwith ShelfThis versatile design can stand alone on any flat surface for quick and easy set-up, or clamp to virtually any table, rack case or even DJ equipment (included attachments shown below). Light and portable, the LPT6000 is ideal for holding your laptop, CD player, EFX machine or lighting controller. Features 4 easy line-it-up height adjustments, 3 pre-set widths and an angled platform with front bumpers. An included center rod extension accommodates larger laptops/equipment. All contact surfaces are covered with EVA rubber to prevent damage or scratching to mounting surface and equip-ment. New for 2010, the LPT6000 adds a FREE shelf for additional laptop equipment and/or accessories.

Weight Capacity: 10 lbs.Height Adj.: 9.25-14.25”Width Adj.: 9.5-11”Depth: 10.25”Shelf Depth: 7.25”Color: Black Powder Coat Finish◄--- |PACK|

Included attachments for the LPT6000 allow stand to be clamped to a table or DJ equipment.

NEWfor

2010

NEWfor

2010

MPROVEDDESIGN

1. 2. 3.

33AMP STANDS

RS7000 34757

Tiltback Amp Stand Use this stand to protect your amp and get your sound off the floor! A perfect choice for various stage and studio amplifier applications. The tiltback feature will rest your gear on black velveteen rubber pads, while the angle directs the sound where you can hear it. The A-frame construction makes this stand extremely secure and stable even with heavy amplifiers. Non-slip rubber feet and a locking cross brace keep the stand, and your amp, firmly in place.

Applications: Stage/studio amplifiers and monitorsWeight Capacity: 152 lbs.Height Adj.: 17-24”Upper/Lower Arm Length: 12”Width: 12”Base Spread: 15.5”Construction: All-steelColor: Black Powder Coat Finish

Other Features for RS7000:1. Use the friction locking knob to quickly and easily adjust the shelf height to 5 different positions.2. Locking cross brace adds strength and support. The single hinge allows legs to fold quickly and easily for travel.3. Padded support arms fold down for quick and easy storage.

Entire stand breaks down into three pieces and will lay flat for storage and travel.

1. 2.

On-Stage Stands® |

34 AMP STANDS cont. AMP / MIXER STANDS

Other Features for RS7705:1. Two-inch knobs allow for maximum grip and torque when adjusting your stand. Double clutch disk allows you to remove and rotate the support arm assembly.2. Folding support arms saves space for storage and travel, while the cushions protect and grip your gear. Horizontal support of your amp at any angle.

RS7500 53839

Tiltback Amplifier Stand Getting your amp off the floor and tilted back improves your mix. This new Tiltback is constructed with a heavy-duty steel tripod base that adjusts to accommodate various sized amps. More importantly, it features 5 tilt positions that allow for optimal sound. The fold-and-go RS7500 is perfect for the road and it even includes a 5/8” threaded end, allowing musicians to add a mic or boom (see new MSA7500CB at right). Both the velveteen rubber amp holders and foam padded collar that slides along the upper shaft protect your amp from scratches and dings.

Applications: Stage/studio amplifiers and monitors Weight Capacity: 100 lbs.Height Adj.: 8-10” off floorBack Rest Support Height Adj.: 19-36”Mic Mount Height Adj.: 23-37”Angle Adjustment: 95-110°Folded Dimensions: 5 x 4.5 x 26.5”Construction: All-SteelColor: Black Powder Coat Finish

RS7705 29024

Pro Tiltback Amp Stand The strength and versatility of this stand come from its double clutch disk. This innovation holds the support arm firmly, yet still allows it to be removed and rotated. The solid steel double stamped 3” disk provides a secure locking position every time! The A-Frame base, constructed of 1” square tubing, can be adjusted in order to get the most stable stance possible under your amp. Ridged end caps keep all metal surfaces off of the ground and act as a shock absorber.

Applications: Stage/studio amplifiers and monitorsWeight Capacity: 90 lbs.Depth: 11”Base Spread: 17”Construction: All-SteelColor: Black Powder Coat Finish

NEWfor

2010

NEWfor

2010 MSA7500CB 56580

Posi-Lok™ Combo Boom Arm Introducing an “Over-the-Top” Combo Boom Arm, designed specifically for use with the RS7500 Tiltback Amp Stand. The MSA7500CB is a 22” boom arm with a 7” adjustable mini boom arm. Full articulation allows any style of microphone to be positioned for close or medium-distance miking. The proven Posi-Lok™ clutch design is safe to use with even the most valuable microphones. Includes 2 cable clips to secure loose mic cords.

Boom Length: 22”; 7” Mini boomTubing: 16mmFolded Dimensions: 3 x 3 x 24.5”Construction: All-Steel with neoprene rubber locking washersColor: Black Powder Coat Finish

RS7500 Named in the “Gotta Stock It” category - Summer NAMM 2009!

RS7500 and MSA7500CB shown with amp and mic set-up.


35

Other Features for RS9050:Top platform support arms have an adjustable 5-position tilt clamp.

RS9050 35350

Adjustable Amp/Mixer Stand This project studio utility stand is the perfect solution for today’s recording musician. A versatile design, the heavy-duty RS9050 features an adjustable tilt top platform, built-in outboard gear rack, and a set of sturdy locking casters. The locking casters allow for easy access to connections and also make moving around the studio a breeze. The built-in 10 unit, 19” rack is perfect for loading outboard gear, power amps, or signal processors.

Applications: Mixers, autolocators, hard disk recorders and samplersWeight Capacity: 150 lbs.Height Adjustment: 29-31”Base Spread: 20.5 x 18”Construction: All-SteelColor: Black Powder Coat Finish

MIX-400 72023

Autolocator / Mixer Stand The MIX-400 is much more than a mixer stand; it’s the ideal place for the most sophisticated equipment! Its amazing strength, portability and versatility make it the perfect choice for pro-audio users. The rubberized support arm protects and grips gear, while the heavy-duty base with casters is completely adjustable! The entire unit breaks down into 3 pieces for storage and transportation.

Applications: Small mixers, autolocators, digital audio workstations, drum machines, samplers, laptop computersWeight Capacity: 88 lbs. Height Adjustment: 28-38”Platform Width Adjustment: 14.5-21.5”Platform Depth Adjustment: 12-15.5”Base Spread: 23”Construction: Steel and PlasticColor: Black Powder Coat Finish

1. KMS7927B - Platform width adjusts to the size of your monitor and keeps it securely in place with a safety strap.

2. MIX-400 - Platform width, depth, height and angle are fully adjustable. Platform extensions lock in place at desired depth, the dual locking knobs adjust the width, while the Posi-Lok™ clutch adjusts the platform angle.

3. KMS7927B & MIX-400 - Casters are fully lockable and constructed from high-impact plastic. Spider-style molded leg housing for extra strength and stability.

2.

3.

KARAOKE STANDS

KMS7927B 79270

Adjustable Karaoke/ TV Monitor Stand This fully adjustable and durable karaoke monitor stand is a necessity for every karaoke gig. Removable locking casters attach to a durable high-impact plastic base and allow for easy transport for the VJ on the go. Five pre-set locking positions and a friction locking clutch make this stand height and angle adjustable. It even provides 2 microphone holders that can be removed for transport. Includes a tray for 2 drink cups and a nylon strap to keep the monitor in place.

Applications: MonitorsWeight Capacity: 140 lbs.Height Adjustment: 36-56”Platform Width Adj.: 13.5-24”Platform Depth: 10”Base Spread: 23”Construction: Steel and PlasticColor: Black Powder Coat Finish

1.

◄

◄ ◄

◄

Other Features for RS7030:The square end caps raise all metal parts off of the floor and act as shock absorbers.

36


ON-STAGE GEAR FLIGHT CASES

FC5000CD 51962

CD Player Case The FC5000CDj flight case fits most front-loading CDj players and 12” DJ mixers. The rugged design combines a 5mm hard shell enclosure and an aluminum skeletal structure that both supports and protects equipment. It features a slide-out panel for access to front-loading CD slots, recessed latches and handles, and stackable ball corners. The foam-lined partitioned interior provides removable foam shims for a perfect fit.

Applications: Fits popular CDj players including the Pioneer CDJ800, CDJ1000, CDJ-2000, DNX5000, DNX3500, SLDZ1200 and most 12” DJ mixersLength: Interior - 16.3”; Exterior - 18.4”Width: Interior - 13.1”, Exterior - 15.2”Depth: Interior - 5.6”; Exterior - 9”Weight: 12 lbs.Construction: 5mm Plywood shell; PVC exterior; aluminum skeletal structure; steel ball corners.Additional Foam Included: 15 Hook & loop strips;12 Hook & loop blocks

FC7002FR 51964 2-Space Flight RackExterior Dimensions: Length - 25”; Width - 21.5”; Depth - 5.5”Front/Rear Lid Depth: 2.5”Rackable Depth: 18”Weight: 18 lbs.

FC7004FR (not shown) 51963 4-Space Flight RackExterior Dimensions: Length - 26”; Width - 21.5”; Depth - 9”Front/Rear Lid Depth: 2.5”Rackable Depth: 18” Weight: 24 lbs.

FC7006FR (not shown) 51968 6-Space Flight RackExterior Dimensions: Length - 26”; Width - 21.5”; Depth - 12.7”Front/Rear Lid Depth: 2.5”Rackable Depth: 18”Weight: 27 lbs.

FC7008FR (not shown) 51967 8-Space Flight RackExterior Dimensions: Length - 26”; Width - 21.5”; Depth - 16.1”Front/Rear Lid Depth: 2.5”Rackable Depth: 18” Weight: 33 lbs.

Flight Rack CasesOn-Stage Gear Flight Cases are engineered to protect your valuable rack gear. They feature ATA-style hardware, recessed latches and handles, and pre-mounted rubber feet. 9mm Heavy-duty plywood enclosure and an aluminum skeletal structure both supports and protects your equipment. All models provide both front and rear rack rails, and include rack screws and rubber washers.

FC7002FR / FC7004FR / FC7006FR / FC7008FR Construction: 9mm Plywood shell; PVC exterior; aluminum skeletal structure; steel ball corners.Color: Black with chrome hardware

RACK STANDS

RS7030 34032

Table Top Rack Stand This handy stand assembles in minutes! Its simple yet versatile design puts 12 standard rack spaces on your studio floor, desktop, or anywhere else. The bottom horizontal bar serves as a secure and sturdy rest for gear, while the top horizontal brace adds stability. The fixed angle of the RS7030 allows for easy monitoring of the rack gear while still supporting all its weight. Great in the studio and at home.

Applications: Power amplifiers, mixers, mic preamps, compressors, cassette decks, CD players, headphone amps, effect unitsWeight Capacity: 75 lbs.Height: 23”Width: 19.5”Depth: 14”Tubing: 15 x 30mmConstruction: All-SteelColor: Black Powder Coat Finish

NEWfor

2010

NEWfor

2010

NEWfor

2010

NEWfor

2010

Rugged construction features for all On-Stage GEAR Flight Cases include heavy-duty plywood enclosures, aluminum skeletal structures and stackable steel ball corners.

37SPEAKER STANDS

SS7730B 29943

Classic Speaker Stand The steel-aluminum design on this affordable speaker stand makes it both lightweight and durable. Use either the 1-3/8” diameter upper shaft or the included 1½” adapter sleeve for a universal fit.

Applications: Mid-size speakersUpper Shaft Tubing: 1-3/8”Weight Capacity: 160 lbs.Height Adj.: 44-80”Base Spread: 32-48”Construction: Steel and aluminumColor: Black Powder Coat Finish

|DISPLAY|Both the SS7730B and SS7761B Speaker Stands are available with the color POP displays (at right), making them immediately accessible in the store... a benefit to dealers and consumers alike.

SS7761B 74006

All-Aluminum Speaker Stand Our most versatile speaker stand is alsoextremely affordable! It is lighter than the SS7730, and features a reversible-shaft design. It may be used with either 1-3/8” or 1½” speaker cabinet inserts. No adapter sleeve is necessary.

Applications: Mid-size speakersUpper Shaft Tubing: 1-3/8” or 1½”Weight Capacity: 120 lbs.Height Adj.: 44-80”Base Spread: 32-48” Construction: AluminumColor: Black Powder Coat Finish

Other Features for SS8800B+:Raise or lower your speakers using either the removable manual handle or a power drill.

Other Features for LS/SS7770:Height adjusts up to 10-feet with tension locking knobs, while the wide base spread adds stability.

How it works:The bottom of the upper shaft is capped, and a pin hole in the bottom of the center shaft controls the release of air.

knknkkknkkkkk1. 2.

On-Stage Stands® |

38 SPEAKER STANDS cont.

SS8800B+ 28846

POWER Crank-Up Speaker Stand By far the easiest method of raising speaker cabinets 80” off the floor. The easy-to-use POWER Crank-Up height adjustment system operates with either the removable manual handle or any standard electric or cordless drill. The upper shaft is constructed from extruded aluminum and the gear teeth are milled into the shaft, making it the most affordable solution on the market to cranking up speaker cabinets! Power drill not included.

Applications: Small speaker cabinetsUpper Shaft Tubing: 1-3/8”Weight Capacity: 80 lbs.Height Adj.: 31-61”Base Spread: 18”Color: Black Powder Coat Finish

LS/SS7770 79004

10-Foot Universal Lighting/Speaker Stand Larger than life! Reaching 10 feet and supporting up to 140 lbs., the LS/SS7770 gets lights above the band and speakers above the audience for a truely impressive production.It features 3 shafts, 2 clutchs, steel-aluminum construction, locking height pins, and extra long double-braced legs. A reversible top shaft means it can be used with 1-3/8” and 1½” lighting bars or speaker mounts.

Applications: Lighting/Mid-size speakersUpper Shaft Tubing: 1-3/8” or 1½”Weight Capacity: 140 lbs.Height Adj.: 44-120”Base Spread: 38-58”Construction: Steel and aluminumColor: Black Powder Coat Finish

SS7766B 34703

Airhead Speaker Stand This Airhead features a built-in air chamber that lowers even the heaviest speaker cabinets gently on a cushion of air. A pneumatic shock absorber in the center shaft prevents the speaker cabinet from accidentally sliding for increased safety. Adjusting the cabinet is now easier with a six “stop-point” locking system.

Applications: Mid-size speakersUpper Shaft Tubing: 1-3/8”Weight Capacity: 80 lbs.Height Adj.: 47-80”Base Spread: 32-48”Color: Black Powder Coat Finish

Other Features:1. Tension height adjustment knob and safety pin for added safety.2. Locking/Retractable leg housing with 120° design for low center of gravity and equal weight distribution.

SS7725B 49196

All-Steel Speaker Stand The all-steel SS7725B utilizes a 1-3/8” upper shaft. It also includes a 1½“ adapter, making it compatible with all standard pole-mountable speakers. It features a 2-section vertical shaft, eight preset height adjustment holes, and a locking pin for added security. The tripod base folds flat and non-slip rubber end caps add stability.

Applications: Mid-size speakersUpper Shaft Tubing: 1-3/8” Weight Capacity: 120 lbs.Height Adj.: 46-74“Construction: All-steelColor: Black Powder Coat Finish

Dealers - Ask about our promotional Power Drill offer today! It works with both the LS7805B lighting stand and the SS8800B+ speaker stand.

1. 2.


39STUDIO MONITOR STANDS ALL-IN-ONE SPEAKER PAKS

SSP7950 76059

All-Aluminum Speaker Stand Pak This Speaker Stand Pak features two of our top-selling speaker stands and our top-selling bag! The Pak includes two all-aluminum, height adjustable speaker stands and one convenient carry bag that holds both stands. The all-aluminum speaker stands feature reversible upper shafts, 8 preset height adjustment holes, and locking pins for added security.

Pak includes:(2) Tripod Speaker Stands All-aluminum with reversible 1-3/8” or 1½“ upper shaft. 2-Section vertical shaft. Weight Capacity: 120 lbs. Stand Height Adj.: 44-80“(1) Speaker Stand Bag Bag features an adjustable shoulder carrying strap, 2 carrying handles, and a heavy-gauge 2-pull zipper. Holds 2 speaker stands.

SSP7850 77020

Professional Steel Speaker Stand Pak This Speaker Stand Pak includes two height adjustable steel speaker stands, two external mounting brackets and one convenient carry bag that holds all of the above. The all-steel speaker stands with 1-3/8” upper shafts feature 2-section vertical shafts, 8 preset height adjustment holes, and locking pins for added security.

Pak includes:(2) Tripod Speaker Stands All-steel, with 1-3/8” upper shafts. 2-Section vertical shafts with eight preset height adjustment holes and locking pins. Weight Capacity: 120 lbs. Stand Height Adj.: 46-74“(2) Speaker Stand Mounting Brackets Fit on 1-3/8” stand and mount to many speaker cabinets. Constructed from heavy-duty plastic.(1) Speaker Stand Bag Bag features a drawstring closure and center divider. Will hold both speaker stands and brackets.

SMS6000-P 35490

Near-Field Monitor Stand This stand is designed with home and project recording studios in mind. The height adjusts for listening while sitting or standing and locks in place with a security pin. Three adjustable leveling spikes on the bottom of the base keep this stand stable on any carpeted surface. The entire stand breaks down into three pieces for easy storage and travel. SMS6000-P Packaged and sold in pairs. Applications: Studio Monitors Platform: 9.5” Square platform with 1mm thick non-slip padWeight Capacity: 90 lbs.Height Adj.: 31-61” Base Spread: 18”Construction: SteelColor: Black Powder Coat Finish

Other Features:1. The clutch and locking security pin make height adjustments quick and easy; also ensure that both the stand and equipment are safe and secure.2. 18” Base with 3 leveling spikes keeps stand stable on carpeted surfaces.

1. 2.

On-Stage Stands® |

40

Other Features for SS7321W/B & SS7322B:1. Ergonomic 2” knob adjusts tilt angle from 90° to 30°. 90 Interlocking teeth mesh together to form a solid adjustable pivot point for tilting your speakers.2. Added solid-steel pin serves as a safety-stop. 9mm Steel bolt and nut.

MOUNTS, BRACKETS & ATTACHMENTS

SS7322B 40983

Adjustable Wall MountSpeaker Bracket Ideal for sound contractors. Mount this bracket on walls at night clubs, recording studios, home multi-media rooms, schools or just about anywhere! For mounting on flat surfaces. This adjustable bracket features a tilting angle adjustment as well as a 30° swivel hinge.

Applications: Small-Medium Speaker CabinetsWeight Capacity: 80 lbs.Shaft length: 12.5”Angle Adjustment: 90-30°Construction: SteelColor: Black Powder Coat Finish

SS7321W 40980

Corner Wall Mount Speaker Bracket, Ivory Ideal for sound contractors. Mount this bracket on walls at night clubs, recording studios, home multi-media rooms, schools or just about anywhere! For mounting in corners. Features an ivory finish.

SS7321B 40982

Corner Wall Mount Speaker Bracket, Black Same design as SS7321W, but with black finish.

SS7321W / SS7321B Applications: Small-Medium Speaker CabinetsWeight Capacity: 40 lbs.Shaft length: 19.75”Angle Adjustment: 90-30°Construction: Steel

Adjustable tilt features on the SS7321W/B and SS7322B allows you to mount various speaker cabinets:1. At upright 90° position, you can mount a 22” deep speaker cabinet. 2. At 30° tilt down position, you can mount a 30” deep speaker cabinet.

Adjustable swivel features on the SS7322B and SS7323B are supported by a nut and bolt (shown at right); strong enough to support up to 80 lbs. (SS7322B) or 100 lbs. (SS7323B).

1.

2.

12” - mount a 22” cabinet

15” - mount a 30” cabinet

90°

-30°

±30°

B. SS7740S 74008

Subwoofer Attachment Shaft Same design as SS7740B, but with two SSA1.5 adapters included. SS7740B / SS7740S Upper Shaft Tubing: 1-3/8”Shaft length: 42”Weight Capacity: 160 lbs. C. SS7745 35627

Adjustable SubwooferAttachment Shaft All-steel shaft adjusts from 36-60” with a friction locking knob and security pin for added safety.

Upper Shaft Tubing: 1-3/8”Shaft length: 36-60”Weight Capacity: 80 lbs.

A. SS7740 74009

Subwoofer Attachment Shaft This heavy-duty 1-3/8” aluminum shaft connects bass enclosures on the stage floor to high-frequency cabinets.

A. B. C.


41ACCESSORIES

SS7914B 48516

Wall Mount Speaker Bracket Ideal for sound contractors. Mount this bracket on walls at nightclubs, recording studios, home multi-media rooms, schools or just aboutanywhere! With the included adapter sleeve, this wall mount makes for auniversal fit: 1-3/8” - 1½”. Includes screws for assembly.

SS7323B 49712

Wall Mount Speaker Bracket Ideal for sound contractors. Mount this bracket on walls at night clubs, recording studios, home multi-media rooms, schools or just about anywhere! For mounting on flat surfaces. This adjustable bracket features a tilting angle adjustment as well as a 30° swivel hinge.

Applications: Small-Medium Speaker CabinetsWeight Capacity: 100 lbs.Shaft length: 13”Angle Adjustment: 45-90°Construction: SteelColor: Black Powder Coat Finish

EB9760 5135

Exterior Mounting Bracket Fits on 1-3/8” stands and mounts to any speaker cabinet. Mounting hardware included.

Dimensions: 7-3/8 x 4-3/8”Construction: Heavy-duty plastic

SSB-6500 35543

Heavy-Duty Speaker Stand Bag A must for every roadie, this rugged padded nylon bag provides ample room for either two speaker stands, six mic stands or various drum hardware. Features an adjustable shoulder strap with metal clip for fast removal. Also includes hand straps for convenient handling. Two heavy gauge metal pulls are attached to the zipper so that the bag can be zipped at the center or side. All seams are crafted with corded piping that gives the bag its rigid shape.

Dimensions: (l)50 x (w)10 x (h)5”

SS7912B 79121

Universal Wall Mount Mounts to wall or ceiling and attaches to small speakers. Features tilting design. 1-3/8” - 1½” adapter sleeve included.

Adjustable tilt features on the SS7323B allows you to mount various speaker cabinets:1. At upright 90 ° position, you can mount a 22” deep speaker cabinet. 2. At 45 ° tilt down position, you can mount a 30” deep speaker cabinet.

1.12” - mount a 22” cabinet

90°

2.15” - mount a 30” cabinet

-45°

Cabinet Adapters & InsertsA. SSA2 - Speaker Stand Adapter Sleeve 79165 Fits on 1-3/8”stand for use with speaker cabinets that have 1½” inserts.B. SSA3 - Speaker Stand Adapter Sleeve 29773 Sits on 1-3/8” stand to reduce the shaft to 1” and mounts into a speaker cabinet.C. SSA1.375 - Speaker Cabinet Insert 79155 Fits on 1-3/8” stand and mounts into a speaker cabinet. D. SSA1.5 - Speaker Cabinet Insert 79160 Same as above, but use for 1½” cabinets.

A.B. C.

D.

SS7912B Weight Capacity: 15 lbs.Construction: All-steel Color: Black Powder Coat Finish

SS7914BWeight Capacity: 80 lbs. Construction: All-steelColor: Black Powder Coat Finish

SS7920B 39955

Dual Mount Speaker Bracket Safely and conveniently mounts two speaker cabinets. Constructed from steel, this bracket mounts to most standard speaker stand shafts. Features 1 3/8” inserts and a black powder coat finish. Recommended for use with the heavy-duty LS/SS7770 10-Foot Universal Lighting/Speaker Stand (pg. 38).

Applications: Mounting two speaker cabinets with 1 3/8” inserts.Bracket Length: 20“ from center of one insert to the otherColor: Black Powder Coat Finish

On-Stage Stands® |

42 LIGHTING STANDS

Other Features for LS7805B:Raise or lower your lighting system using either the removable manual handle or a power drill.

LS7805B 29577

POWER Crank-Up Lighting Stand By far the easiest method of raising a lighting system 80” off the floor. The easy-to-use POWER Crank-Up is constructed from extruded aluminum and the gear teeth are milled into the shaft, making it the most affordable solu-tion on the market to cranking up a lighting system! Power drill not included. The 48” top T-bar holds up to 4 par cans, while the two 24” side mount bars each hold 2 par cans, for a total of 8 par cans.

Weight Capacity: 80 lbs.Height Adjustment: 56-138” (11.5’)Base Spread: 48”Construction: SteelColor: Black Powder Coat Finish

LS7720BLT 29942

Lighting Stand with Side Bars This classic stand allows for maximum height adjustments and will support up to 8 par cans. The stand adjusts with friction knobs, and locking pins can be used for added security. The top T-bar holds up to 4 par cans, while the side mount bars will hold an additional 4 par cans.

Weight Capacity: 110 lbs.Height Adjustment: 60-120”Base Spread: 48”Construction: Hi-grade aluminumColor: Black Powder Coat Finish

LS/SS7770 79004

10-Foot Universal Lighting/Speaker Stand See Speaker section - pg. 38 for full specs.

Dealers - Ask about our promotional Power Drill offer today! It works with both the LS7805B lighting stand and the SS8800B+ speaker stand.

Other Features for LS9790:Dual locking knobs attach trusses together for a total of 10 feet of support.


43STAND / TRUSS SYSTEMS ACCESSORIES

LS7730 29945

Lighting Stands with Truss A low-cost alternative in lighting stands that can hold a total of 16 par cans! Includes two tripod base lighting stands with 3 section shafts and T-bars. The T-bars hold 4 par cans each. Also includes two 5’ Truss sections, holding 4 par cans each. Easy assembly with screw on plastic bracket. Thumb screws allow for easy height adjustments. For static lights only.

LS9790 75010

Lighting Stand with 10-Foot Truss Our top-of-the-line pro-quality lighting stand includes two tripod base lighting stands with triple telescoping shafts and T-bars. The T-bar assemblies are 48” long and will hold 4 par cans each. Fourteen sets of mounting hardware are included, leaving room for ten additional par cans. Heavy-duty metal clamps and all-steel construction make this stand a perfect choice for high-end use!

LTA-9500 35510

Hanging Lighting TrussSupport Bar Use this Support Bar to hang the LT9000 Lighting Truss. Securely attach the suspension cable through the eyelet on one end and on the other end clamp the LT9000 Truss using the Quick-Release functionality. Slide the security pin on the LT9000 through pin holes on the Support Bar. NOTE: LT9000 Lighting Truss has been discontinued.

Length: 32”Construction: Heavy-duty 38mm steel tubing with 2mm thick wall Color: Black Powder Coat Finish

LTA7770 34749

Lighting Stand Hook Clamp Use to install additional pars on any of our lighting stands.

LSB-6500 35540

Lighting Stand Bag Crafted from heavy-duty padded nylon. Holds (1) LS7730, (2) LS7805B, (2) LS7740-QR or (2) LS7780BLT. Heavy-duty 2-pull zipper allows bag to be opened with ease from the center.

Bag Dimensions: (l)62 x (w)13 x (h)9”

LS7730Weight Capacity: 200 lbs.Max Height: 11.5’Base Spread: 48”Construction: Hi-grade aluminumColor: Black Powder Coat Finish

LS9790Weight Capacity: 400 lbs.Max Height: 11.5’Base Spread: 40”Construction: All-steelColor: Black Powder Coat Finish

On-Stage Stands® |

44 SHEET MUSIC STANDS & BAGS

SM7122BB 5112

Compact Sheet Music Stand with Bag, Black Our SM7122BB Sheet Music Stand comes with a handy bag featuring a convenient shoulder strap. All edges are piped, and the durable material makes this bag a smart choice to protect your stand. The SM7122 is available with a black powder coat finish (SM7122BB) or 12 other colors listed on the right. Bag Dimensions: 23.75 x 6.22”Color: Black stand, black bag

A. SM7122B 5060

Compact Sheet Music Stand, Black This classic American design folds for easy storage and portability with a spring-loaded trigger release. The two-section vertical shaft with cam locking clutch and tilting book plate features make this stand adjustable for sitting or standing positions. The fold out extensions with a six point hinge system can hold three 8.5” x 11” sheets.

A.

B.

B. SM7122N 5142

Compact Sheet Music Stand, Nickel Same design as SM7122B, but with Nickel finish.

SM7122B / SM7122N Book Plate: 9” foldable with 2”return lip Height Adj.: 26-40”Base Spread: 21”|PACK| ---► Also available in 11 other colors, listed at right.


45

SMSB-6500 35542

Sheet Music Stand BagA durable black canvas bag with handle. Holds most standard folding sheet music stands, including all SM7122 and SM7222 models.

Bag Dimensions: 23.75 x 6.22”

SM7222BB 51112

Tubular Tripod Base Sheet Music Stand with Bag Our SM7222 Tubular Sheet Music Stand is also available with a black bag featuring a convenient shoulder strap. All edges are piped and the durable material makes this bag a smart choice to protect your stand.

Bag Dimensions: 23.75 x 6.22”Color: Black stand, black bag

Dealers - Ask about our FREE Custom LogoPrinting Program. Call for Details!

Minimum order quantity: 144 pcs.

SM7222B 79300

Tubular Tripod BaseSheet Music Stand This classic design combines the strength and stability of a tubular tripod base with the convenience of easy height and angle adjust-ments. Our SM7222 features an adjustable bookplate, a telescoping 3-section vertical shaft, and a sturdy tripod folding leg base. The entire stand folds flat for easy storage or travel and comes fully assembled so that there are no pieces to lose!

Book Plate: 17” foldable with 1”return lipHeight Adj.: 20-52”Base Spread: 18-23”Color: Black Powder Coat Finish

Also available in 11 other colors, listed at left.

SM7122LBB - Light Blue 48505SM7122DBB - Dark Blue 79311SM7122GRB - Green 79314SM7122YB - Yellow 79313SM7122RDB - Red 48508SM7122PKB - Pink 79312SM7122LVB - Lavender 50882SM7122PVB - Purple 48506SM7122MBB - Midnight Blue 50883SM7122WHB - White 79315SM7122SLB - Silver 50884SM7122NBB - Nickel 5101

SM7222LB - Light Blue 79301SM7222DB - Dark Blue 79302SM7222GR - Green 79303SM7222Y - Yellow 50889SM7222RD - Red 79304SM7222PK - Pink 79305SM7222LV - Lavender 50885SM7222PV - Purple 50891SM7222MB - Midnight Blue 50886SM7222WH - White 50888SM7222SL - Silver 50887

The SM7122BB Compact Sheet Music Stand with Bag is also available in the following colors:

The SM7222B Tubular Tripod Base Sheet Music Stand is also available in the following colors:

1. 2.

Other Features for SM7211B & SM7611B:1. Tension locking knob will adjust the angle of the bookplate.Other Features for SM7611B:2. Clutchless internal retention system allows for smooth one-handed adjustments.

On-Stage Stands® |

46 CONDUCTOR STANDS

SM7211B 36630

Conductor Stand with Tripod Folding Base This revolutionary stand incorporates all of the features demanded by today’s orchestra musician, including a folding tripod base for convenient storage and travel. The angle adjustment tension knob makes for easy removal from the upper shaft. The stand also features a high impact plastic leg housing, friction locking knobs, leg support straps and non-slip rubber feet.

Book Plate: 13.5 x 19” w/ 2” return lip.Center shaft: 1-3/16”Height Adj.: 24-45”Base Spread: 18”Color: Black Powder Coat Finish

SM7611B 76009

Hex-Base ® Conductor Stand This innovative stand is truly designed for today’s most demanding music enthusiast. At the heart of this stand is its clutchless internal retention system, along with the patented base design. This unique combination lets the user raise or lower the bookplate into position without the need for knobs or levers. The weighted base keeps the stand stable, and the low-profile design makes for optimal use of stage space. Ideal for any orchestra musician.

Book Plate: 13.5 x 19” w/ 2” return lip.Height Adj.: 30-48”Base Spread: 18” Hex-shaped baseColor: Black Powder Coat Finish

SM7311W 40974

Conductor Stand with Wood Bookplate This revolutionary stand incorporates all of the features demanded by today’s orchestra musician, including a folding tripod base for convenient storage and travel. The angle adjustment tension system makes for easy removal from the upper shaft. The stand also features a solid wood bookplate with a Rosewood finish, a high impact plastic leg housing, friction locking knobs, leg support straps and non-slip rubber feet.

Book Plate: 13.5 x 19“ w/ 2” return lip.Center Shaft: 1-3/16”Height Adj.: 24-45“Base Spread: 18”Color: Black Powder Coat Finish Stand and Rosewood Bookplate

MY101 53694

Conductor Stand Mic Clip Designed to attach to conductor stands with two wingnut screws. The heavy-duty rubber clip is nearly unbreakable and stretches to accommodate a wide range of microphone models. Perfect for rehearsals and performances alike.

Compatible with our SM7211B and SM7611B Conductor Stands.

2.2. 1.1.


47WOODWIND / BRASS INSTRUMENT STANDS

Other Features for SXS7101B & SXS7201B:1. Removable wooden peg fits most clarinets/flutes.2. Entire stand breaks down into 5 components for convenient storage.

Other Features for SXS7401B & SXS7501B:1. Locking knob adjusts height for sitting or standing positions.2. High-impact plastic leg housing folds flat for convenient storage and travel.

SXS7101B 76000

Alto/Tenor Sax Stand w/Flute Peg For use with either an alto or tenor sax, this compact stand also includes one screw-in wooden peg for a flute or clarinet. The angle of the center shaft balances the instrument prop-erly, while the upper and lower yoke securely hold it in place. The soft black velveteen rubber will not damage the finish of your saxophone.

Base Spread: 18”Color: Black Powder Coat FinishNumber of Instruments Held: 2

SXS7201B 76001

Double Sax/Flute Stand This versatile stand holds two alto or tenor saxophones in any combination and includes two screw-in pegs for either flutes or clarinets. The adjustable yoke supports are removable for storage and travel. Non-slip rubber feet and strong 7/8” square tubing make this stand an ideal choice for the professional horn player.

Base Spread: 21 x 14”Color: Black Powder Coat FinishNumber of Instruments Held: 4

SXSA7201B 72000

Baritone Sax Holder The extended height and wider yoke on the SXSA attachment hold a baritone sax securely. For usewith the SXS7201B only.

SXS7401B 76005

Tall Alto/Tenor Sax Stand Designed for use while standing, this extra tall model holds an alto or tenor saxophone at a height that can be easily reached without having to bend over. The adjustable upper and lower yoke supports securely hold the saxophone in place. The lower cross yoke can be adjusted to two positions, ensuring that your instrument is cradled and balanced securely. The tripod folding leg base and removable yoke assembly make this stand ideal for storage and travel.

Height Adj.: 36-48”Base Spread: 22”Color: Black Powder Coat FinishNumber of Instruments Held: 1

SXS7501B 77040

Baritone Sax Stand The adjustable upper yoke support on this stand securely holds one large baritone saxophone in place. The lower cross yoke can be adjusted to ensure that your instrument is cradled and balanced securely. The tension locking knob allows height adjustments for sitting or standing positions. The tripod folding leg base and removable yoke assembly make this stand ideal for storage and travel. Its soft black velveteen rubber will not damage the finish of your saxophone.


SXS7201B shown with SXSA7201B Baritone Sax Attacment.

2. 4.1. 3.

How It Works:1. Three flat steel legs with rubber end caps provide stability.2. The leg assembly folds down through slots and twists into a locked position.3. Legs fold back up through fitted groove for compact storage.4. All desktop instrument stands fit snugly into instruments’ bells for storage and travel.

Other Features for TRS7301B & TS7101B:Instrument rests on a rubber end cap and spring-loaded bell support. The stand will adjustto the bell of your instrument so it will never wobble or tip.

On-Stage Stands® |

4848 DESKTOP STANDS

B. DSC-7600 35960

Desktop Clarinet/Flute Stand Utilizing the same easy twist and lock leg assembly as the DST-7600, this stand is designed to securely hold most clarinets and flutes. Three flat steel legs and plastic end caps keep your instrument stable and secure.

Base Spread: 9”Color: Black Powder Coat Finish

A. DST-7600 35958

Desktop Trumpet Stand The easy to use twist and lock leg design allows this desktop stand to fold and fit snugly into the trumpet’s bell for storage. The high-impact plastic bell housing has rubber protective pads to prevent damage to your trumpet. Five flat steel legs and plastic end caps keep your trumpet stable and secure.


C. DSS-7600 35962

Desktop Soprano Sax Stand Designed to securely hold most soprano saxophones, this stand features the same easy twist and lock leg assembly as the other desktop stands. The entire stand will fold for compact and easy storage within the bell of your saxophone.


D. DSK-7600 35793

Combination Desktop Stand Kit The perfect kit for the multi-talented musician! Kit includes:(1) Tripod Folding Base(1) Clarinet/Flute Stand Attachment(1) Soprano Sax Stand Attachment


DSC, DSS & DSK-7600 bases can be used as a mic stand; screw mount will fit any standard mic clip.

A.

B.

The unique folding mechanism featured on all of our desktop stands is a state-of-the-art design, making the stands compact, storable within your instrument and available to you wherever you travel.

C.

D.

TRS7301B 76015

Trumpet Stand A must for serious trumpet/cornet players. The tripod base design folds for compact, easy storage and travel. A spring-loaded bell support adjusts to your instrument, ensuring that it rests safely and securely.

Base Spread: 13”Color: Black Powder Coat FinishNumber of Instruments Held: 1

TS7101B 76025

Trombone Stand This professional-quality trombone stand employs a spring-loaded bell support to safely hold your instrument. The midpoint height adjustment clutch adjusts for sitting or standing positions. The tripod base folds for easy storage and travel, while its extra wide 22” spread makes for superior stability.



49ACCESSORIES

TCM7520 50517

Trumpet Straight Mute T he TCM7520 produces the mellow tones associated with high quality straight mutes. Designed to be free blowing and in-tune.

Materials: Spun Aluminum and Natural corkColor: Silver

TCM7530 50516

Trumpet Whisper Mute The TCM7530 Whisper Mute is an ideal practice mute for students and professionals alike. Its natural cork gasket makes a perfect seal inside the bell, greatly reducing volume, yet preserving accurate intonation.


TCA6500 50438

Trumpet Case This durable and convenient case is constructed from molded polystyrene, cradling your trumpet and providing accommodations for your mouthpiece and valve oil. The interior is lined with black velvet to protect your instrument’s finish. It features 2 exterior accessories pockets, reflectors, oversized 2-pull zippers, 1 top carry handle, 2 side carry handles, 2 removable backpack style straps, and 4 plastic feet on both the bottom and side.

Dimensions: (w)15.75 x (h)14.25 x (l)22.5”Materials: Molded Polystyrene w/ Nylon exterior; Plush Velvet interior liningColor: Black

FS7000B 77050

Clarinet or Flute Stand This basic stand features a wooden peg that securely screws into the 6” weighted sand-cast metal base. The base utilizes three rubber feet for added stability. Fits most clarinets and flutes, and can be used as a floor or desk stand.

Base Diameter: 6”Color: Black Powder Coat FinishNumber of Instruments Held: 1

TCM7420 50518

Trumpet Wah Wah Mute This “Wah-Wah” mute allows the player a whole new level of expression. Its classic sound is altered by manipulating the cup at the end of the mute.


The custom molded interior is lined with a plush velvet to keep your trumpet protected and secure .

On-Stage Stands® |

50 DRUM STICKS

American Hickory Drum SticksAHN2B, Tip: Nylon, Size 2B 42003AHN5A, Tip: Nylon, Size 5A 42004AHN5B, Tip: Nylon, Size 5B 42005AHN7A, Tip: Nylon, Size 7A 42006AHW2B, Tip: Wood, Size 2B 42007AHW5A, Tip: Wood, Size 5A 42008 AHW5B, Tip: Wood, Size 5B 42009AHW7A, Tip: Wood, Size 7A 42010

Hickory Drum SticksHN2B, Tip: Nylon, Size 2B 35545HN5A, Tip: Nylon, Size 5A 35549HN5B, Tip: Nylon, Size 5B 35553HN7A, Tip: Nylon, Size 7A 35557HW2B, Tip: Wood, Size 2B 35547HW5A, Tip: Wood, Size 5A 35551 HW5B, Tip: Wood, Size 5B 35555HW7A, Tip: Wood, Size 7A 35559

Maple Drum SticksMN2B, Tip: Nylon, Size 2B 35544MN5A, Tip: Nylon, Size 5A 35548MN5B, Tip: Nylon, Size 5B 35552MN7A, Tip: Nylon, Size 7A 35556MW2B, Tip: Wood, Size 2B 35546MW5A, Tip: Wood, Size 5A 35550 MW5B, Tip: Wood, Size 5B 35554MW7A, Tip: Wood, Size 7A 35558

Hickory & Maple Drum SticksTo play with lightning speed you need sticks that are stronger, straighter and last longer... And, we found a quality wood that is perfect for just that! On-Stage Sticks have been logged, air kiln dried, shaped, sanded and sealed and are ready to make some thunder. Our Hickory and Maple wood sticks are offered with a nylon or wood tip in a variety of different sizes. Available in bricks of 12 pairs of sticks.

American Hickory Drum Sticks On-Stage Sticks have been logged, air kiln dried, shaped, sanded and sealed and are ready to make some thunder. Our American Hickory sticks are offered with a nylon or wood tip in a variety of different sizes. Available in bricks of 12 pairs of sticks.

Dealers - Ask about our FREE Custom LogoPrinting Program. Call for Details!

Minimum order quantity: 120 bricks - 1440 pairs

51


BAGS & ACCESSORIES

DSB6500 35534

Drum Stick Bag This nylon bag features two carrying handles and a heavy gauge 2-pull zipper. Two inner vertical pockets and adjustable straps allow you to attach the bag around a floor tom, giving you easy access to your sticks while playing. The bag can hold an entire brick of sticks, ideal for the drummer on the go!

Material: Nylon Cordura®

Dimensions: 17 x 4.5 x 3”Color: Black

DSB6700 48631

Drum Stick Bag This durable carrying bag can store up to 10 pairs of sticks or any combination of sticks, mallets and brushes, ideal for the drummer on the go! It features a carrying handle, oversized zipper and front pouch. Three inner vertical pockets and a mounting string allow you to attach the bag around a floor tom, giving you easy access to sticks while playing.

Material: Nylon Cordura®

Dimensions: 15.5 x 18.25”Color: Black

The design of both the DSB6500 and DSB6700 allows you to attach the bag onto a drum so that you can have easy access to your sticks while playing.

DA-100 53874

Clamp-On Drum Stick Holder Keep up to 8 pairs of sticks conveniently within reach. The DA-100’s C-shape mounting clamp attaches easily to most stands or other hardware. Its extension arm is angled downward at 45° for easy removal and placement of sticks while playing. Neoprene material absorbs shock vibra-tions and reduces unwanted drum stick rattling noises. The neoprene pocket can also be removed from the mounting clamp for easy cleaning.

Material: Neoprene with ¼” reinforced binding; Steel clamp and extension arm Dimensions: 11” long; 3¼” diameter openingColor: Black|PACK| ---►

NEWfor

2010

NEWfor

2010

On-Stage Stands® |

52 DRUM SET KITS

DK7500-GB 52562

Drum Set Kit, Gloss Black DrumFire drumsets give you a head start over other entry-level kits. Their quality 6-ply Poplar shells come in standard sizes used by drummers in all styles of music. Everything you need is included, from drum key, to sticks, to throne and cymbals. Finished in Gloss Black. DK7500-WR (not shown) 52725

Drum Set Kit, Wine Red Same design as DK7500-GB, but with a Wine Red Metallic finish.

DK7500-GB / -WR Drum Sizes: (1) Bass drum – 22” x 16”(1) Floor Tom – 16” x 16” (1) Tom Tom – 13” x 11”(1) Tom Tom – 12” x 10” (1) Snare drum – 14” x 5”

DK7500-GB / -WR Hardware: (1) Throne(1) Snare drum stand(1) Cymbal stand (1) Hi Hat stand(1) Bass drum pedalCymbals: Pair 14” hi hats; 1pc 16” ride cymbal; (1) Drum key(1) Pair of 15 ½” drum sticks


53535353BAGS & ACCESSORIES

DKJ5500-B (not shown) 52672

Junior Drum Set Kit, Gloss Black Our DrumFire junior-sized kits feature all the quality and advantages of the full-sized models, but are scaled down for the smallest percussionist. They are complete sets with everything you need to tune, setup, and play. Finished in Gloss Black.

DMA4450 58809

Non-Slip Drum Mat Keep your drums from creeping across the floor. The DMA4450 is a lightweight and convenient alternative to the heavy, fraying rugs drummers commonly use to keep their drum sets from moving while playing. It is made from durable, non-slip PVC material, and its 4’ x 4’ area is perfectly sized for gigging in tight spaces. Two velcro straps and convenient nylon carry bag are included. Dimensions: 4’ x 4’

DKJ5500-WR 52563

Junior Drum Set Kit, Wine Red Same design as DKJ5500-GB, but with a Wine Red Metallic finish.

DKJ5500-B / -WR Drum Sizes: (1) Bass drum – 16” x 11” (1) Floor Tom – 13” x 10” (1) Tom Tom – 10” x 7”(1) Tom Tom – 11” x 7” (1) Snare Drum – 12” x 5”

DKJ5500-B / -WR Hardware: (1) Throne(1) Snare drum stand(1) Hi Hat stand(1) Bass drum pedalCymbals: Pair 9.5” hi hats; 1pc 12” ride cymbal(1) Drum key(1) Pair of drum sticks

Perfect for the musician on the go! Our Drum Mats unroll in seconds and remain flat; it won’t curl up at the edges. The two velcro straps and convenient carry bag provide a quick and easy breakdown solution.

DMA6450 56674

Non-Slip Drum Mat New for 2010, the DMA6450 offers our Non-Slip Drum Mat in a 6 x 4’ size. Same design as the DMA4450, but 6 x 4’ area provides ample room for a full 5-piece drum set. Dimensions: 6’ x 4’

DMA4450 / DMA6450 Material: Non-slip PVC material; nylon bagColor: Black with Green accents

NEWfor

2010

NEWfor

2010

|DISPLAY|Both the DMA4450 and DMA6450 Drum Mats are available with the color POP displays (at right), making them immediately accessible in the store... a benefit to dealers and consumers alike.

54

On-Stage Stands® |

BAGS & ACCESSORIES cont.

DTA1088 50574

Drum Set Dust Cover Keep your drum set free of dust and debris with the DTA1088 dust cover. The water resistant nylon cover also protects your set from harmful UV rays, preserving its finish and keeping the heads in tune. This 80” x 108” cover comes complete with sewn-in weighted corners to keep it in place.

Material: Waterproof NylonDimensions: 80 x 108”Color: Black with Green accents |PACK| ---►

NEWfor

2010

NEWfor

2010

NEWfor

2010

NEWfor

2010 DFP7500 53755

Drum Practice Pad Ideal for beginner and professional drummers alike. This standard size practice pad is extremely durable and will withstand even the most demanding practice sessions. Suitable for standing or sitting, the double-braced stand is stable and height-adjustable. The DFP7500 also features a pivoting head for angle adjustments and 6mm bolt for quick and easy setup and tear down. Drum head is removable for storage and travel. 6mm Mounting bolt fits most standard drum pads, including Remo.

Applications: Quietly practice drumming anywhere with a realistic feel.Height Adj.: 22-35”Base Spread: 7.9-29”Head Angle Adj.: 80°Dimensions: 8” Drum pad diameterColor: Chrome and Black |PACK| ---►

MDT2 55736

Double-Braced Drum Throne The MDT2 features a soft, round foam-cushioned seat, providing outstanding comfort and support. Double-braced tripod legs offer strength and stability. Unlike lesser designs, the MDT2 is secure, without any wiggling, thanks to an internal nylon sleeve around its height-adjustable shaft and a spider-shaped insert at its base.

Material: Foam cushion covered in a durable leather-textured material; Rubber feet.Height Adj.: 5 Notches adjust from 19.5-24.4”Base Spread: 18.11”Dimensions: 11” Diameter; 2.4” Seat ThicknessColor: Chrome and Black


5555555555555555

DSW1420 51341

Replacement Snare Wires Versatile, durable and engineered to produce an ultra clear sound! DSW1420 Replacement Snare Wires are 14” in length and are a perfect choice for all drumming styles. The 20-strand steel wires feature identical medium-gauge (0.6mm) coils and chrome-plated end clips. Mounting strips included.

Material: 20-Strand Steel Wires;Dimensions: 14”Coils: Identical Medium-Gauge Coils (0.6mm)◄--- |PACK|

DHB6500 50576

Drum Hardware Bag Portability and protection for your drum hardware! This rugged heavy-duty hardware bag features two rollerblade-style wheels and a reinforced handle for handcart-style portability. Constructed from a heavy-duty nylon material, the bag is lined with foam padding to protect your equipment. It features a front accessories pocket, a top compartment sized to fit a drum throne seat, a removable interior vinyl compartment divider, and an extra wide double-pull zipper. Holds up to 8 pieces of hardware.

Applications: Holds up to 8 pieces of drum hardwareMaterial: Nylon exterior; Foam lined interior; Removable Vinyl divider.Dimensions: 13.39 x 12.6 x 40.16”Color: Black

CBT4200D 56317

Deluxe Cymbal Bag The CBT4200D offers ultimate protection and an easy transporting solution. It features an interior foam liner, two carrying handles, a removable and adjustable shoulder strap and a retractable trolley pull with wheels. It holds a total of 8 cymbals (5 inside pocket, 3 outside pocket), the largest up to 22” in diameter. Interior foam dividers separate your cymbals and provide extra protection and support. The new design features an improved, stronger retractable trolley pull system and reinforced stitching.

Material: NylonDimensions: 28 x 25 x 4.5”Weight Capacity: 100 lbs.** Product not intended to be rolled up or down stairs. Only use the shoulder strap to carry the bag. Do not lift it by the trolley handle.Color: Black

Quick and easy to attach!

MPROVEDDESIGN

On-Stage Stands® |

56 CABLES

Microphone Cables Quality sound and construction that you can rely on! Hot Wires microphone cables have the strength and durability to withstand the road and still perform everyday. Four new models added for 2010 . |PACK|

Instrument Cables Quality sound and construction that you can rely on! Hot Wires instrument cables have the strength and durability to withstand the road and perform everyday. Cable thickness - 6mm for all models, except IC-20-BR - 6.5mm.Four new models added for 2010. |PACK|

MC12-3 58680 3’ XLR-XLR Mic Cable



MC12-15 5868 1 15’ XLR-XLR Mic Cable



MC12-25 HZ 48413 25’ XLR-QTR Mic Cable, Hi-Z

MC12-50 48415 50 ’ XLR-XLR Mic Cable

IC-3 58685 3 ’ QTR-QTR Instr. Cable

IC- 6 58687 6 ’ QTR-QTR Instr. Cable


IC-10-HS 54563 10 ’ QTR-QTR Instr. Cable Heat Shrink tubing for added strain relief.



IC-20-BR 54564 20 ’ QTR-QTR Braided Instr. Cable


57575757


Speaker Cables Quality sound and construction that you can rely on! Hot Wires speaker cables have the strength and durability to withstand the road and perform everyday. Cable thickness - 7mm; 14-gauge wires. SP14-10 and two news Banana Cables added for 2010. |PACK| SP14-6 48418 6’ QTR-QTR Speaker Cable

SP14- 10 58775 10’ QTR-QTR Speaker Cable

SP14-25 48416 25 ’ QTR-QTR Speaker Cable SP14-50 48417 50 ’ QTR-QTR Speaker Cable

SP14- 10-BA 58758 10’ Banana-QTR Speaker Cable

SP14- 25-BA 58759 25’ Banana-QTR Speaker Cable

Speakon® Speaker Cableswith Neutrik® NL2 Connectors Twist-lock Speakon® connectors are quickly becoming the standard pro audio connection at all levels. These Hot Wires cables use au-thentic Neutrik® NL2FC connectors to terminate 14-gauge wires for use with high-power speakers and amplifiers. Hook-and-loop cable-tie included. |PACK|

Perfect Pair Powered Speaker Interconnect Cables Perfect Pair Combo Cables maximize the con-venience of powered speakers. They carry both AC power and double-shielded line level signal. This means that only one power drop is necessary by the mixing position, from which power and signal can be sent with just one cable run. 36” Tails at both ends ensure that there is plenty of length to accommodate any setup. Aunthentic Neutrik® XLR connectors provide reliability in connections and ease of use. Power connections are made via industry standard IEC plugs, compatible with most popular powered speaker models. A great alternative to running multiple extension cords and microphone cables. 24-Gauge signal lines; 14-gauge AC power cord. |PACK| MP-COMBO25 55840 25’ Combo Cable

MP-COMBO50 55841 50’ Combo Cable

MP-COMBO75 55842 75’ Combo Cable MP-COMBO100 55843 100’ Combo Cable

SP14-10SS 55886 10’ Speakon-Speakon



SP14-10SQ 55891 10’ Speakon-QTR

SP14-25SQ 55890 25’ Speakon-QTR SP14-50SQ 55892 50’ Speakon-QTR

bles

NEWfor

2010

NEWfor

2010

edd

NEWfor

2010

NEWfor

2010

MP-COMBO Connector Ends

Patch Cables A. PC18-17QTR-R 58760 QTR-QTR Right-Angle Patch Cables, 17”. Multi-color 8-pack.

PC18-17TRS-R 58762 Same as PC18-17QTR-R; TRS-TRS ends.

B. PC18-17QTR- S 58761 QTR-QTR Straight Patch Cables, 17”. Multi-color 8-pack.

PC18-17TRS- S 58763 Same as PC18-17QTR-S; TRS-TRS ends.

Pedal Couplers A. PC306B 58764 QTR-QTR Right-Angle Pedal Coupler. Black, 6”.

B. PC306T 58767 Same as PC306B; Tweed cable covering.

C. PC312B 58765 QTR-QTR Right-Angle Pedal Coupler. Black, 12”.

D. PC312T 58766 Same as PC312B; Tweed cable covering.

A.B.

C.

D.

A.

B.

58


DIRECT BOXSTAGE SNAKES ACCESSORIES

D. SNK20450 52902 50’ in length.

SNK204100 52903 100’ in length.

SNK20450 / SNK204100 No. of Inputs: 20 No. of Returns: 4 Channels: 24

E. SNK24450 52904 50’ in length.

SNK244100 52905 100’ in length.


DB500 53696

Direct Box The DB500 Direct Box transforms any high-impedance ¼” source into a low-impedance (XLR) signal ready to be sent long distances to a mixing board or recording console. Its passive design features a high quality transformer, ground lift switch, and does not require batteries or phantom power. Perfect for bass/acoustic guitar, keyboards, and DJ equipment.

Input Impedence: 350K ohmsOutput Impedence: 80 ohmsDimensions: (w)4.75 x (h)1.375 x (d)2.875”Weight: .5 lbs.Power: PassiveColor: Black

C. SNK16450 52899 50’ in length.

SNK164100 52901 100’ in length.


A. SNK8450 52897 50’ in length.

SNK84100 52895 100’ in length.


B. SNK12450 52896 50’ in length.

SNK124100 52898 100’ in length.


Stage Snake Boxes These stage box provide (XLR) female input channels plus 4 (XLR) male returns. All inputs and returns feature locking connections for a secure fit. Each connector is hand soldered and individually insulated to prevent electrical shorts even after years of use. Features include quick-release connectors, well-protected and flexible cable bundling, and a heavy-duty all metal chassis box. Comes with a built-in easy carrying handle and protective black nylon bag.

Return Type: XLR MaleCable Gauge: 26 Gauge inner core diameter; 21 Gauge outer core diameterConstruction: 16 Gauge steel box

A. B. C.

E.D.

CTA6600 48640

Cable Ties The perfect way to contain your unruly cables! They provide an easy, neat way to secure your guitar, mic and power cords. The fabric strips feature Velcro® style closures to hold your coiled cables in place. Ties can remain on the cables at all times. Packaged and sold 5 per pack. |PACK| ---►

59595959595959595959595959595959MICROPHONES

AS400 29939 Cardioid PatternFrequency Response: 80Hz~12HzImpedence: 600 Ohm +30% at 1KHzSensitivity: -74dB +3dB AS420 29940 Cardioid PatternFrequency Response: 80Hz~12HzImpedence: 600 Ohm +30% at 1KHzSensitivity: -73dB +3dB

OSM800 34258

Platinum SeriesCondenser Microphone With an extended top end presence, smooth mid range, and full low end, this versatile microphone delivers accurate and natural sound reproduction. The OSM800 is flexible enough to mic demanding sound sources yet it bears an attractive price tag, making it ideal for both commercial and home studios alike. Complete with a 1” diaphragm and built-in FET preamp, the OSM800 is a sound choice for vocals or a wide-range of acoustic instruments, whether on stage or in the studio. Features an on/off switch under the cover. Mic mount and carrying case included.

Cardioid PatternFrequency Response: 20-20000KHzImpedence: </=200 Ohm(at 1khz)Sensitivity: -12mv/pa=-38db (0dB=1v/Pa)Connector: 3-Pin XLRPower Requirement: +48v Phantom Power

Low-Z DynamicHandheld Microphones Affordability without compromising performance! The ideal microphones to keep in stock for entry-level musicians, special promotions, and general purpose events. Priced for any budget, these microphones will deliver stunning results at an excellent price! Feature an on/off switch, all-metal construction. 20’ XLR-XLR Cable and mic clip included.


60 WIRELESS SYSTEMS

WMP50-H 53912 Frequency 169.50Hz



WMP50-L 53941 Frequency 169.50Hz



WMP50-G 53940 Frequency 169.50Hz



Wireless Handheld Microphone SystemA new series of easy-to-use VHF wireless systems from Audio Spectrum. Ideal for small-medium sized venues, practice environments, conference rooms, karaoke and much more; these compact systems deliver on sound performance and are priced to sell. The WMP50-H system includes a cardioid microphone with steel mesh grille and receiver unit with ¼” - 1/8” cable. Available in three frequencies (listed below).

Wireless Lavalier Microphone SystemA new series of easy-to-use VHF wireless systems from Audio Spectrum. Ideal for small-medium sized venues, conference rooms, churches and much more; these compact systems deliver on sound performance and are priced to sell. The WMP50-L system includes a clip-on unidirectional microphone with foam windscreen, bodypack transmitter with belt clip and receiver unit with ¼” - 1/8” cable. Available in three frequencies (listed below).

Wireless Guitar SystemA new series of easy-to-use VHF wireless systems from Audio Spectrum. Ideal for small-medium sized venues, practice environments, and much more; these compact systems deliver on sound performance and are priced to sell. The WMP50-G system includes a durable ¼” - 1/8” instrument cable, bodypack transmitter with belt clip and receiver unit with ¼” - 1/8” cable. Available in three frequencies (listed below).

WMP50-H Applications: Small-medium sized venues, practice environments, conference rooms, karaoke, and moreMax Operating Range: 100 ft.Typical Operating Range: 50-66 ft.Frequency Response: 50Hz-10kHzElement Type: Cardioid DynamicOutput Power: 8.5mWIncluded: (2) AAA batteries, (1) 9V battery Battery Life: 5 hours|PACK| ---►

WMP50-L Applications: Small-medium sized venues, churches, practice environments, conference rooms, and moreMax Operating Range: 100 ft.Typical Operating Range: 50-66 ft.Frequency Response: 50Hz-10kHzElement Type: Cardioid Dynamic Electret UnidirectionalOutput Power: 8.5mWIncluded: (2) AAA batteries, (1) 9V batteryBattery Life: 5 hours |PACK| ---►

WMP50-G Applications: Small-medium sized venues,practice environments, and moreMax Operating Range: 100 ft.Typical Operating Range: 50-66 ft.Output Power: 8.5mWIncluded: (2) AAA batteries, (1) 9V batteryBattery Life: 5 hours |PACK| ---►

t

NEWfor

2010

NEWfor

2010

NEWfor

2010

NEWfor

2010

NEWfor

2010

NEWfor

2010

6161616161616161616161616161616161616161616161616161616161616161LCD / PLASMA MOUNTS

A. LPB7112S 40987

Fixed LCD/Plasma Mount Great for homes, board rooms, lobbies, sports bars and more, this LCD/Plasma Mount is offered in two standard sizes. Both modelsfeature a low-profile design and are made from solid heavy-gauge steel capable of supporting up to 165 lbs. Quick and easy installation. Mounting hardware included.

Mounting Plate Dimensions: 21 x 9.75“Mounting Arm Length: 13.75”TV Size Range: 23-37” Screens B. LPB7112M 40988

Fixed LCD/Plasma Mount Same design as LPB7112S, larger frame.

Mounting Plate Dimensions: 30 x 9.75 “Mounting Arm Length: 20”TV Size Range: 36-55” Screens

A.

B.

LPB7112S / LPB7112MDistance to Wall: 3”Weight Capacity: 165 lbs.Construction: SteelColor: Silver Powder Coated Finish

LPB8006 40990

Low-Profile LCD/Plasma Mount Designed for homes, board rooms, lobbies, sports bars and other applications, the LPB8006 allows screens to mount nearly flush with the wall to maximize the sleek, thin lines of flat-panel TV’s. Constructed from heavy-gauge solid steel, this mount is capable of supporting TV’s or monitors with 10”-24” screens. The slip-mount design allows for quick and easy installation. Mounting hardware included.

Mounting Plate Dimensions: 5.5 x 5“TV Size Range: 10-24“ ScreensDistance to Wall: .5”Weight Capacity: 50 lbs.Construction: SteelColor: Silver Powder Coated FinishVESA Compatible: 50, 75, 100

Easy-to-install slip-mount design secures yourLCD/Plasma quickly and safely.

62 LCD / PLASMA MOUNTS cont.

Over the last three decades The Music People, Inc. has developed the talent, design, and manufacturing capacity to continually feed its proprietary brands with new and innovative products. This capacity has also made The Music People, Inc. the OEM choice for some of the industry’s largest brands. As acontract manufacturer, TMP offers its clients a comprehensive range of services that reduce cost and drive profits, and a level of quality that promotes brand recognition and loyalty. We invite your business to join the list of companies who gain from the unique production resources of The Music People!

OEM TMP works on projects with many music and audio industry companies, large and small, building lines of accessories that support their core products. These companies trust TMP to manufacture products to their exact standards, and do it at a cost below what they themselves could realize. These cost savings are a direct result of our manufacturing expertise, our factory relationships, and the shear volume of product generated by our proprietary brands and OEM operations.

ODM Likewise, industry leaders trust TMP as an Original Design Manufacturer, either seeing conceptual designs to fruition, or developing entirely new products for them. This process takes full advantage of TMP’s considerable design and manufacturing capacity, bringing the client’s products to market in the most cost-effective way possible.

CAD Design TeamTMP’s senior designers have in-depth knowledge of consumer products for the music and audio industries. USA-based engineers design products to client specifications and work closely with counterparts in China to ensure that the designs are manufactured as efficiently as possible. TMP designers are experienced with metals, wood, MDF, poly-foams, and plastics, and develop products as diverse as mic stands, instrument cases, drum sets, audio cables, and furniture.

Research & DevelopmentWith 24 factories in China, TMP is able to proceed from CAD drawings to functioning prototypes with the utmost efficiency. TMP clients benefit from the trial of pre-production samples, which can be examined at sales meetings, trade shows, and other events. The TMP design team has a unique knowledge set, including manufacturing techniques, material characteristics, and music industry needs. The result is a long series of popular, useful, and profitable products.

MarketingTMP has been marketing consumer products in the music industry for over 30 years. Not only do TMP clients enjoy award-winning branding and logo design, they benefit from price point analysis, research of competing products, and extensive exposure at tradeshows. TMP has launched hundreds of ad campaigns and has designed packaging for many top companies within the industry.

Import LogisticsAfter coordinating the design, development, and manufacturing of OEM products, TMP has a team of experts to handle all bills of lading, freight forwarding, customs documents, and everything else associated with moving client’s products from factory to destination. For clients with international reach, TMP’s factories can export product directly from China.

Focus on Your BrandWith these comprehensive manufacturing services from TMP, your business can focus on its brand. We will identify, develop, and produce the accessories that complement and add value to your core products. Contact [email protected] today and learn why top brands trust their accessory production to The Music People.

rtise our factory

A. LPB7103S 40985

Tilting LCD/Plasma Mount Great for home and commercial applications, this Tilting LCD/Plasma Mount tilts up and down for better viewing from the couch, bed, confer-ence room chair, bar stool or even the floor. We offer this mount in two standard sizes. Both models feature a low profile design and are made from solid heavy-gauge steel capable of supporting up to 165 lbs. Quick and easy installation. Mounting hardware included.

Mounting Plate Dimensions: 21 x 8.25“Mounting Arm Length: 13.75”TV Size Range: 23-37” Screens B. LPB7103M 40986

Tilting LCD/Plasma Mount Same design as LPB7103S, larger frame.

Mounting Plate Dimensions: 29.5 x 9“Mounting Arm Length: 19.5”TV Size Range: 36-55” Screens

A.

B.

The tilting feature on the LPB7103S/M allows for angle adjustment from -5 ° to 15°, which creates ideal viewing from virtually any location. Angled position locks in place with large ergonomic tightening knob.

LPB7103S / LPB7103MDistance to Wall: 3”Weight Capacity: 165 lbs.Tilt Range: -5°-15°Construction: SteelColor: Silver Powder Coated Finish

ng

aass

ies f The Music People!

TTTTTTTTTTTTTTMMMMMMMMMMMMMMPPPPPPPPPPPPPP CCCCCCCCCCCCCCCooooooooooooooonnnnnnnnnnnnnnttttttttttttttrrrrrrrrrrrrrraaaaaaaaaaaaaaaccccccccccccccctttttttttttttt MMMMMMMMMMMMMMaaaaaaaaaaaaaaannnnnnnnnnnnnnuuuuuuuuuuuuuuuffffffffffffffaaaaaaaaaaaaaaacccccccccccccccttttttttttttttuuuuuuuuuuuuuuurrrrrrrrrrrrrriiiiiiiiiiiiiinnnnnnnnnnnnnnggggggggggggggggggggg SSSSSSSSSSSSSSSeeeeeeeeeeeeeeerrrrrrrrrrrrrrvvvvvvvvvvvvvviiiiiiiiiiiiiiccccccccccccccceeeeeeeeeeeeeeesssssssssssssss

Call or Email Today for Pricing Information | 1.800.289.8889 | [email protected]

63

The Music People, Inc. has come a long way in 32 years. We have grown to encompass nine exclusive brands with distribution centers on both coasts. Our history and experience have helped us to incorpo-rate award winning product packaging and design with excellent customer attention and parts services. We can satisfy all your stand and accessory needs, combining them with over 140 of the top pro-audio brands in the industry, and we have the experience and know-how to put them together. Because we are a comprehensive one-stop solution, you save time and money, using less of your administrative resources and enjoying reduced freight costs and coordinated deliveries.

Product DesignWe’ve been fortunate to establish very close relationships with the most successful music retailers in our industry. We have listened closely to these customers, and they have helped us develop products that meet the greatest needs in the market. Jim Hennessey and his team of product designers and project coordinators continue to develop some of the industry’s most innovative stands and accessories. Many of the products and features that are now so commonly used in music and equipment stands were originally developed at TMP: The first double and triple guitar stands, quick-disconnect weighted microphone stands, speaker stand locking pins…the list goes on and will continue to go on in the years to come. We have a long history of conceiving new high-volume products and improving existing ones, maximizing portability, making them work better, last longer, and cost less.

Customer ServiceWe have reinvested year after year into providing the best customer service we can. We’ve done this by hiring the finest “People”. Since expanding our Customer Service assets, proportionally more than any other department, we have experienced double-digit growth. This is great evidence that we really are a customer-service driven company. Almost all of us, from our product design teams to our sales representatives, interact directly with our customers.

PartsIsn’t it nice to know that behind the great products you’ve grown to depend on, there is a company that makes parts available if you misplace something. If something on your stand breaks because of a defect, than we will stand behind our products. Parts are available to end-users through our customer service line or orders placed online. That’s what you can expect when you buy a Music People propri-etary product like On-Stage Stands and the others in this catalog.

Make Your Mark with our Custom Logo and Private Label ProgramsAsk your sales representative which of our products can have your custom logo imprinted on them. We make the process simple and easy. We are proud to be associated with your business and look forward to strengthening our partnership. We also offer Private Label programs to high volume customers. We can utilize your existing graphics or our team of award-winning packaging designers can create a unique look just for you.

How to Contact UsOur sales team is ready to assist you from 9:30 AM to 5:30 PM EST.Call 1.800.289.8889 or fax your order to 1.860.828.1353.Or access our b2b e-commerce site at www.musicpeopleinc.com.

TTTTTTTTTTTTTTTTTTTThhhhhhhhhhhhhhhhhhhheeeeeeeeeeeeeeeeeeeee MMMMMMMMMMMMMMMMMMMMuuuuuuuuuuuuuuuuuuuuusssssssssssssssssssssiiiiiiiiiiiiiiiiiiiiccccccccccccccccccccc PPPPPPPPPPPPPPPPPPPPeeeeeeeeeeeeeeeeeeeeeoooooooooooooooooooooppppppppppppppppppppplllllllllllllllllllleeeeeeeeeeeeeeeeeeeee!!!!!!!!!!!!!!!!!!!!! IIIIIIIIIIIIIIIIIIIInnnnnnnnnnnnnnnnnnnncccccccccccccccccccc......

OOOOOOOOOOOOOOOOOOOOOnnnnnnnnnnnnnnnnnnnn------SSSSSSSSSSSSSSSSSSSSSttttttttttttttttttttaaaaaaaaaaaaaaaaaaaaagggggggggggggggggggggeeeeeeeeeeeeeeeeeeeee SSSSSSSSSSSSSSSSSSSSSttttttttttttttttttttaaaaaaaaaaaaaaaaaaaaannnnnnnnnnnnnnnnnnnndddddddddddddddddddddsssssssssssssssssssss WWWWWWWWWWWWWWWWWWWWooooooooooooooooooooorrrrrrrrrrrrrrrrrrrrlllllllllllllllllllldddddddddddddddddddddwwwwwwwwwwwwwwwwwwwwiiiiiiiiiiiiiiiiiiiidddddddddddddddddddddeeeeeeeeeeeeeeeeeeeeeOn-Stage Stands has opened its doors to International Import Distributors! We currently have manyinternational distributors already in place including Japan, Australia, Spain, Canada and Mexico whohave all done very well with our concepts and product line. Our staff currently works closely with over21 factories that ship out of 3 major shipping centers in China. Over the years we have built strongrelationships with our factories, which gives us the ability to offer you a complete product assortmentwithout the cost and hassle of working direct with the factories. We can offer you a complete line ofover 300 products, all of which are USA engineered and many include POP marketing.

Contact [email protected] today to learn about our growing International Distribution Division.

Documents

On-Stage_Stands_Product_Catalog_2011