Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Ology™ Boundary Screen
888.STEELCASE (888.783.3522)
www.steelcase.com
© 2019 Steelcase Inc. Grand Rapids, MI 49501 U.S.A.
®
Page 1 of 41360035001 Rev A
T30
#2 SQUARE
5/32”
®
Page 2 of 41360035001 Rev A
Dual SidedSingle Sided
Assemble Mounting Bracket
1) Using (3) M6 button head thread forming screws (provided)attach the mounting bracket to underside of cross-tubeweldment.
TIP: Note hole positions used on single sided (see arrows),centered on dual sided applications.
2a) Use a level to check for vertical orientation. 2b) Loosen(6) button head screws using a 5/32" allen wrench, 2c) adjustthe interface bracket to vertical and 2d) retighten (6) buttonhead screws.
2a2d
2b
2c
5/32”.472"
(12mm)
3x
1
®
Page 3 of 41360035001 Rev A
1” minimum
Attach the Boundary Screen
3a) Position boundary screen against bracket and check foralignment of the pilot holes (6X), 3b) adjust the screen levelerglides, if necessary, to match the pilot hole pattern to slots inbracket, 3c) secure using (6X) #10-12 x .625 screws (provided).
TIP: Check screen for 1” minimum gap clearance and alignmentto work surface top. If necessary, loosen screws from Step 1,make adjustment to screen position, then retighten screws securely.
3c 3b 3a
®
Page 4 of 41360035001 Rev A
Install Trim
4c4b4a
4a) Flex sides of trim cover open to overlap mounting bracket.4b) engage “V-tabs” to slots, then 4c) push cover tight toboundary screen.