E-CAT6-P-GPLM-05-A

60Hz

GPLⅡ/GPMⅡOil pumps

0.30.30.30.30.3

0.4 350.75 551.5 802.2 1253.7 185

0.4 170.75 321.5 502.2 753.7 1205.5 180

GPMⅡ-15VGPMⅡ-20VGPMⅡ-25VGPMⅡ-32VGPMⅡ-40VGPMⅡ-50V

GPLⅡ-20VGPLⅡ-25VGPLⅡ-32VGPLⅡ-40VGPLⅡ-50V

0.4 - 0.50.4 - 0.50.4 - 0.50.4 - 0.50.4 - 0.50.4 - 0.5

20（¾）25（1）32（1¼）40（1½）50（2）

15（½）20（¾）25（1）32（1¼）40（1½）50（2）

Note) This specifications table shows the values when kerosene is used as a sample liquid.

Note) This specifications table shows the values when kerosene is used as a sample liquid.

*If the pumping liquid is heavy oil B, C and others, please contact us.

■Standard specifications ■Standard accessories

■Special specifications

■Special accessories

* Please note that the paint color, etc, of the actual unit may partially differ from the photo.

■Applications

■Features

●For transfer of various fuel oils

●For lubrication of various machines

●For transfer of various viscous solutions

①As the gear is a one-point continuous contact and segmental gear, no liquid is trapped and neither high pressure nor high vacuum is generated, resulting in no noise or vibration.②The bearing requires no lubrication because of a two-point support

structure of a needle bearing and an internal plain bearing and forced self-lubrication.③As a mechanical seal is used for the shaft seal part, no liquid leak or air

suction occurs.④As the pump has a built-in safety valve, abnormal pressure does not rise.

Sluice valve, Check valve, Pressure gauge, Compound gaugeStrainer (Y type, single, duplex)

Motor ……………………………………………………………………………1Common base …………………………………………………………………1Safety valve ……………………………………………………………………1Companion flange (20mm or more) ……………………………………2 setsCoupling ……………………………………………………………………1 setCoupling cover …………………………………………………………………1

■Description of types

①Model②Head type L: Low head M: High head

③Nominal suction/discharge diameter (25mm)④Internal code

①

②

③ ④GPLⅡ - 25 V

light oil, heavy oil AViscous liquid (1 - 300mm2/s)

0 - 80°C

−5m

0.10MPaGear

Mechanical sealNeedle bearing

S45CS45CFC200

Standard efficiency (equivalent to IE1)Direct-on-Line start

Increased safety explosion-proof, indoor type

3-phase 200/220V1800min-1

Screwed type: 15mmFlange type, JIS 10K standard type: 20 - 50mm

Liquid qualityViscosity

Liquid temperature

ImpellerShaft sealBearingImpeller

Motor shaftCasing

EfficiencyStarting method

TypePower source

Synchronous rotation speed

Pumpingliquid

Structure

Material

Motor

Total suction head(In case of 20°C)

Allowable push-in pressure

Connection

MotorType

Power supply

Totally enclosed fan-cooled type, explosion-proof type

Voltage change: single-phase / 100V, 3-phase / 400V

■Specification table●GPLⅡ ●GPMⅡ

Type

Specifications

Type

Specifications

Discharge rateL/min

Discharge pressureMPa

Discharge rateL/min

Discharge pressureMPa

Borediameter

mm

OutputkW

Borediameter

mm

OutputkW

Oil pumps High headLow head

GPM2GPL2

2

●Bore diameter 15mm

■Assembly drawing

4×φ15 Foundation bolt hole

(444)

335

165

20

420

300 6060

120

(175)

150

200

230

125 6513

d

d

Coupling cover

0.4 31Rc½ GPMⅡ-15V

■Dimensions

Note) Total length dimension, approximate mass and terminal box position may be slightly different depending on motor manufacturer.

Approx. masskgType

Bore diameterd

OutputkW

0.4 65 125 165 335 444 175 120 420 300 200 230 3320

0.75 65 125 165 335 476 181 140 420 300 200 230 400.75 70 140 175 350 496 181 140 470 350 220 250 44

251.5 70 140 175 350 550 195 169 470 350 220 250 52

Type A B D H L KL MR BL BM BP BXBore diameterd

OutputkW

Approx. masskg

Flange dimensions: JIS 10K standard type or equivalent

（Unit: mm）

GPLⅡ-20VGPMⅡ-20VGPLⅡ-25VGPMⅡ-25V

Coupling cover

4×φ15 Foundation bolt hole

●Bore diameter 20 - 25mm

■Assembly drawing

■Dimensions

Note) Total length dimension, approximate mass and terminal box position may be slightly different depending on motor manufacturer.

D

AB13L

60BM60BL

H

MR

BPBX

20

200KL

φd

φd

Oil pumpsHigh headLow head

GPM2GPL2

3

■Assembly drawingFlange dimensions: JIS 10K standard type or equivalent●Bore diameter 32mm

1.5 580 195 169 592.2 619 210 193 66

Type L KL MROutput

kWApprox. mass

kg

520535

BL

85100

BN

（Unit: mm）

GPLⅡ-32VGPMⅡ-32V

■Dimensions

Note) Total length dimension, approximate mass and terminal box position may be slightly different depending on motor manufacturer.

Coupling cover

4×φ15 Foundation bolt hole200

BL

20

60350 85

240KL

250

45

18 150 85MRL

207

415

15

φ32

φ32

BN

Flange dimensions: JIS 10K standard type or equivalent

GPLⅡ-40V 2.2 85 160 207 218 35 425 240 629 18 210 193 7840

GPMⅡ-40V 3.7 85 160 207 218 35 425 240 646 18 227 200 92GPLⅡ-50V 3.7 105 190 227 263 30 490 250 700 22 227 200 102

50GPMⅡ-50V 5.5 105 190 227 263 40 490 250 766 22 271 239 124

Type A B D E F H K L S

－－－12.5

P KL MRBore

diameterd

OutputkW

Approx. masskg

（Unit: mm）

Coupling cover

4×φ15 Foundation bolt hole

■Assembly drawing

■Dimensions

●Bore diameter 40 - 50mm

Note) Total length dimension, approximate mass and terminal box position may be slightly different depending on motor manufacturer.

B

LS

DH

25 F50100400

600

220250

P260

40

KKL

MR A

E

φd

φd

Oil pumps High headLow head

GPM2GPL2

4

Oil pumpsHigh headLow head

GPM2GPL2

5

■Example of sectional drawing

■Parts list

●Bore diameter 15mm ●Bore diameter 20 - 25mm

21 181916 20 1715612

1311 95 7 310 4 814 2

1

313978512214410

171819212016151611

No. Part name Qty Material1234567891011

CasingGland caseSide coverMain drive shaftDriven shaftMain drive gearDriven gearKeyKeyKeyHousing

11111111113

FC200FC200FC200S45CS45CS45CS45CS50CS50CS50CFC200

No. Part name Qty Material12131415161718192021

HousingNeedle bearingMechanical sealRelief valve bodyRelief valve coverRelief valveRelief valve springSpring retainerAdjusting screwCap

1411111111

FC200SUJ2

Ceramic vs CarbonFC200FC200

CAC403SWPASS400SS400FC200

MEMO

MEMOMEMO

,　 Please note that product specifications are subject to change for improvement without prior notice.

TERAL INC.Head Office 230, Moriwake, Miyuki-cyo, Fukuyama-city, Hiroshima, 720-0003, Japan

Tel.+81-84-955-1111 Fax.+81-84-955-5777www.teral.net

Teral Asia LimitedRoom 1001,10/F, Olympia Plaza, 255 King's Road, North Point, Hong Kong

Tel.+852-2571-0935 Fax.+852-2571-0619

TERAL THAI CO.,LTD.150 Moo 16 Udomsorayuth Rd., T.Bangkrasan, A.Bangpa-In, Ayutthaya 13160 Thailand

Tel.+66-3535-2148-9 Fax.+66-3535-2150

TERAL TRADING & SERVICE CO.,LTD. 150 Moo 16 Udomsorayuth Rd., T.Bangkrasan, A.Bangpa-In, Ayutthaya 13160 Thailand

Tel.+66-3535-2145-7 Fax.+66-3535-8549

Teral Malaysia Sdn.Bhd. 10, Jalan SS13/6A, Subang Jaya Industrial Estate, 47500, Subang Jaya, Selangor D.E, Malaysia

Tel.+60-3-5611 5775 Fax.+60-3-5612 5775

PT.Teral Indonesia Pumps and Fans Komplek Pergudangan Taman Tekno Blok M No.26.Jl.BSD Sektor Xl, Kelurahan Setu,

Kecamatan Setu, Kota Tangerang Selatan, Provinsi Banten.15314.Tel.+62-21-29665778 Fax.+62-21-75673913

Teral Vietnam Limited Liability Company 9th Floor, LADECO Building, No. 266 Doi Can Street, Lieu Giai Ward,Ba Dinh District, Hanoi City, Vietnam

Tel.+84-24-393-52-790 Fax.+84-24-393-52-289

Teral General Machine (Shanghai) Co.,Ltd. No.285, Yuan Qu Road(N), Bei Qiao, Min Hang District, Shanghai 201109, China

Tel.+86-21-6490-9128 Fax.+86-21-6490-9126

Teral-Aerotech Fans Private Ltd. Plot No.188-189, Ecotech Extension-1, Surajpur Kasna Road, Greater Noida-201306, Uttar Pradesh, India

Tel.+91-9810162210, +91-9310162210

Teral Middle East F.Z.C. 1806-002, 18th floor, BB1, Mazaya Business Avenue, JLT, Dubai, UAE. PO Box 414781

Tel.+971-4369 9039

Teral Pumps & Fans North America Ltd. Suite # 197, 800-15355 24 Ave Surrey, B.C., CANADA V4A 2H9

Tel.+1-604-839-1008

Teral Philippines Inc. Roof Deck 3, Vernida 1 Building, 120 Amorsolo St., Legaspi Village, Makati City

Tel.+63 2 7717-9314

2021 11

E-CAT6-P-GPLM-05-A