8/13/2019 Oil Gas Split Case

1/2

SPP PUMPS

Horizontal Split CasePumps

SPP horizontal or vertical split case pumps have been specifically engineered to meet

the needs and requirements of the oil, gas and process industries. Tough and robust

products are required which have proven long term reliability and benefits, enabling

them to perform in often arduous operational and environmental conditions - where

dependability is of paramount importance.

Typical Applications

Main fire pump

Firewater jockey pump

Booster pump

Seawater intake

Seawater lift

Cooling water

Utilities

8/13/2019 Oil Gas Split Case

2/2

SPP019-MAR05

www.spppumps.com

Casing Cast iron Austenitic CI Bronze Duplex ST ST

Impellers Cast iron or bronze Austenitic CI or Duplex ST ST Bronze Duplex ST ST

Shaft Steel Duplex ST ST Duplex ST ST Duplex ST ST

Nickel Alloy

Other options in suitable combinations available on request.

Pump Design Options

1. Soft packed glands or mechanical seals

2. Grease or oil lubricated pump bearings

3. Horizontal or vertical mounting

4. Single or two stage designs

5. Flange drillings to all major international standards

6. API 610 construction

To maintain its reputation for reliability of performance across its

product range, SPP designs and manufactures the equipment for pump

packages in-house, enabling the company to tailor the package to the

individual installation.

Materials (standard options)

SPP reserve the right to continually develop and improve products. Information contained herein is

for guidance only and subject to change. SPP Pumps Ltd accept no liability whatsoever for any

damages either direct or consequential resulting from the use of such information

Specifications

SPP split case pumps can be custom engineered to suit particular requirements including:

Flexibility in choice of materials of construction - major components such as casings, impellers, shafts and wear rings can be provided in a variety

of materials options - to suit the liquid being handled and the site environmental conditions.

Choice of design options - horizontal, vertical, close coupled or vertical open shaft configuration; with clockwise or counter clockwise rotation

- offers flexibility to suit installation. Pumps can be provided in a variety of flange drillings in accordance with European and American standards.

Standard SPP features include:

Low NPSH requirements and high efficiency double entry francis vane impeller offers minimum NPSH requirements and maximum pump efficiency

offers long term operational reliability and lower running costs.

Balanced axial loads for maximum bearing life - double suction design virtually eliminates axial thrust and reduces bearing loads.

Ease of maintenance - top half of pump casing can be removed to allow service of the rotating element without need to disturb piping system.

Compact SPP design increases seal and bearing life.