Oil & Gas Brochure for Indonesia (Sylabus)

7/31/2019 Oil & Gas Brochure for Indonesia (Sylabus)

1/15

ndustriesIetrochemicalPil & GasO

ASEAN Oil & Gas Workshop Series

Proposal to

Email: [email protected]

Mobile: (65) 9735 9040Email: [email protected]

Soon Lee NG

Commercial Director

Proposal Developed By:

Diana

Phone: (+6231)8430999


2/15

AboutUnderwriters Laboratories

Underwriters Laboratories (UL) is an independent product

testing & certification organization that has been undertaking

cutting edge research, writing & developing standards, testing

and certifying products for more than a century. ULs, 7000

plus employees worldwide are driven by its Public Safety

Mission. A key element of the mission is to support thedevelopment, production and use of products which are

physically and environmentally safe through the application of

safety science and environmental knowledge gained over years

of experience and hence to prevent or reduce loss of life and

property.

ULs technical expertise cut across a range of industry verticals

including but not limited to Appliances & HVAC, Building

Materials and Systems, Chemicals, Energy, Health Sciences, High

Tech, Life Safety & Security, Lighting, Power & Controls, Water,

Wire & Cable. Within these industries, UL offers a range ofservices including Product safety, Components certification,

Systems and Sub-systems compliance, EMC, Environmental

Services, Energy Efficiency Services, Performance Verification

Services, Special Advisory Services and Training.

ULs worldwide family of companies and network of service

providers includes over 65 laboratories, testing and

certification facilities serving customers in more than 100

countries. Be it an End-consumer or a Retailer or a Regulator,

UL represents safety, quality and trust. This trust is visible in

the form of approximately 20 billion UL marks that appears

every year on more than 19,000 types of products, components,

materials and systems. With its well-established links with the

worlds leading regulatory authorities & organizations, UL is

uniquely qualified to provide product developers &

manufacturers the knowledge and infrastructure needed to

help products & systems comply with existing and emerging

regulations to access world-wide markets.

More information about UL can be found at www.ul.com.


3/15

Guiding Principles

Our approach to working with customers is based on six guiding

principles. These guiding principles are applied to everything

we do.

Business PartnersWe combine our business & technicalexpertise to make sure we develop appropriate solutions that

deliver business results.

Thought LeadershipWe are the world-renowned leader in

testing and certification and we apply this expertise and

leadership to everything we do.

Result-OrientedWhen working with customers, everything

we do must deliver a clear benefit. We not only identify success

measures, but make sure our solutions deliver on these

promises.

Knowledge TransferOur collaborative approach embeds

knowledge transfer activities into the workplan to ensure that

all develop key skills and acquire knowledge that will be

important as the solution is developed.

Our solution will be implemented according to these guiding

principles. We will also create a Project Management Office

(PMO) to ensure effective communication and projectmanagement.


4/15

Introduction

The Petroleum and Refining Industry faces numerous challenges including sustainable

development, new technologies, regulatory consistencies and of course, workplace and

environmental health & Safety.

While the industrys implementation of Health, Safety & Environment (HSE) management

systems has yielded significant improvements in industry-wide performance over the past

few years, it is essential that our preparedness for tackling a emergency maintains top

priority with the implementation of the best knowledge solutions. This is a corporate

requirement.

To achieve the corporate goals, one needs to consistently improve your skills, knowledge and

level of commitment.

Our Understanding of Your Needs

UL can help you attain Human Performance Excellence by providing your people with the

training and development tools and support the need to perform to their full potential. With

the Pertamina UL parternership we can achieve the desired level of excellence in the filed

of Fire Safety, Health & Environment through a series of Training modules.

UL has been providing training and personnel development services to Insurance, Refinery,

AHJs and others involved in the mission of life safety, a structured training module for the

past 50 years. We incorporate the most current technology advances and Industry

knowledge into the content of our programs, and deliver them to your organization throughvarious learning techniques.

In this proposal, we have put together different workshop for different needs.


5/15

Our Recommendation for Approach

MobilizationSituation

AssessmentStrategy

DevelopmentImplementation

PlanningImplementationMobilization

SituationAssessment

StrategyDevelopment

ImplementationPlanning

Implementation

The Situation Assessment phase is critical and allows us to build aclear understanding of all SHE/OSHA training requirements In this

phase, we will conduct a series of assessments, and meetings to

better define the current state, build future state requirements and

identify significant gaps in fire safety training system. At the end of

the Situation Assessment, you will have the following:

The details of the training modules

In-depth details of the training to be imparted in these

modules.

Initial drawing plans

The remaining phases build off of the Situation Assessment and

include

Strategy Development and ultimately, implementation.

Implementing this methodology will result in many benefits,

including:

Improvements in overall life safety Mitigating Fires, Accidents,Leakages through

effective control measures

Preservation of revenue through ensuring businesscontinuity

Reduction of costs due to streamlining of safetystandards

Enhancement of image and ability to leverage safetyrecord with the public

The scope of this proposal only includes the consultancy expertise of

UL. Once the project is finalized and fully understood (following

strategy development), time associated with implementation can be

more accurately estimated.Our focus is to ensure an excellent training school in the field of HSE.

We are keen to establish adequate testing facilities & make this

project a adequate and independent to International standards. Our

proposal of the modules is given in the following pages


6/15

Workshop Topic

Introduction: Overview of Fire Protection Concepts for Oil &

Gas Industry

Foam Equipment & Liquid Concentrates for Flammables

Liquid Storage

Understanding the Pipes and Valves for Fire Protection

Roles of Dry Chemical Powder Skids/Portable & Wheeled

Extinguishers in Fire ProtectionProtection of Columns and Beams for Structural Integrity

Fire Containment Measures

Discussion, Questions and Answers

UL University Training & Workshop for Indonesia

Understanding of Fire Protection System in Oil & Gas

Industry (Part 1)

Overview of Workshop

This is a one-day overview to fire protection system used in the oil and gas industry. The seminar

will provide an understanding to the overview of concepts of fire protection, containment and

prevention for the industry including the application of various types of fire protection equipment

as well as providing participants with knowledge for strategy & policies formulation.

Who Should AttendSenior Executives, Director,

Managers and Engineers in the

following functions:

Plant Operations Managers

& Superintendents

Fire Safety Officers

Quality, Health & Safety

Process Operation

Procurement

Facility Planners

Speakers

The proposed speaker is a

qualified engineer and

practitioner from UL with

extensive experience in the

field of fire equipment

evaluation and industry

practice.

Note: Topics subject to change without prior notice

Proposed Duration of Workshop: 1 day

Participants for each class: 20

Available for In-house and Public Training


7/15

Workshop Topic

Combustion Mechanism

Chemistry of Fire

Behavior of Liquids & Gases in Fire

Fire Extinguishing Principles

Physical Properties Affecting Combustion Mechanism

Chemical Extinguishing Agents for Refinery Fires

o MV & HV Spray System, Deluge Systems for TransformerProtection, Water Mist System

o Type of Foam Concentrates, Form Applications, Rim SealProtection, NFPA 11 & UL 162

o Dry Powderso Clean Agents

Fire Tank Fires

o Cone and Floating Roofso Foam Application for Tank Fireo Boil over and Slop over

Case Study


Understanding of Combustion & Chemical Agents for

Refinery Fires (Part 2)


This three-days workshop aims to help participants understand the mechanisms enable

combustion including the chemistry of fire and behavior of the various liquids and gases during a

fire situation in the oil and gas environment. The workshop also help participants understand the

principles of fire extinguishing, the various chemical extinguishing agents ad applications. Who Should Attend

Senior Executives, Director,Managers and Engineers in the



& Superintendents



Process Operation

Procurement

Facility Planners

Speakers



practitioner from UL withextensive experience in the



practice.






8/15

Workshop Topic

Fire Alarm Systems

Gas Detection System

Types of Detectors and Application

UL 864 Standard for Signaling System

Maintenance for Fire Monitoring and Annunciation

Systems

Exercises


Workshop on Fire Monitoring and Alarm System (Part 3)


This one-day workshop focuses on understanding the application and maintenance of fire alarm

systems. This workshop is suitable to facilities design & maintenance staffs and will also provide

participants with an understanding on the difference among the various type of detectors and

a lications.Who Should Attend

Senior Executives, Director,

Managers and Engineers in thefollowing functions:


& Superintendents



Process Operation

Procurement

Facility Planners

Speakers







practice.






9/15

Workshop Topic

Introduction: Maintenance and Testing of Fire Protection

System

Maintenance Requirements of Various Fire Protection

System: Foam System, Water System, etc.

Development of Maintenance & Testing Guidelines

Applicable Testing of the System

Documentations and Guidelines

Specification & Qualification of Fire Protection &

Fighting Equipment



Understanding of Maintenance and Testing of Systems

(Part 4)


This is a one-day workshop on maintenance and testing of fire protection systems based on the

guidelines provided by NFPA. This workshop will provide understanding on various fire

protection systems available, the needs for maintenance and testing, and the applicable

requirements as well as understanding of certification behind the equipment for specification &

qualification before procurement.Who Should AttendSenior Executives, Director,




& Superintendents


Suppliers


Process Operation

Procurement

Facility Planners

Speakers





field of fire equipmentevaluation and industry

practice.






10/15

Workshop Topic

Introduction: Overview of LPG

Hazards associated with LPG

Handling LPG emergencies

Boiling Liquid Expanding Vapor Cloud Explosion

(BLEVE)

Passive Fire Protections

Case Study



Understanding of Liquefied Petroleum Gas Safety (Part 5)


This is a one-day workshop to help participants understand the various hazard associated with

LPG and how to handle different emergency situations. This workshop will explain the concepts of

BLEVE and explore the various protection measures for LPG infrastructure.





& Superintendents



Process Operation

Procurement

Facility Planners

Speakers







practice.






11/15

Workshop Topic

Introduction of Hazardous Locations and its

Classification

Identify Concept of Hazardous Locations

Understanding of Global Product Certification

Requirements for Hazardous Locations Used

Understanding of the meaning of Certification behind

Products Used in Hazardous Location

Equipments, including Personal Equipment, Used in

Classified Environment

Case Study



Understanding of Classification of Hazardous Location and

Equipment Protection


This is a one-day overview to give participants an understanding of the various hazard

classification of work environment due to the presence of the various types of dust, gaseous and

temperature, the meaning of each certification marks on products used in such environment and

the dos & donts in such environment.





& Superintendents



Process Operation

Procurement

Facility Planners

Speakers







practice.






12/15

Workshop Topic

Categorize and Classify Hazardous Substances

Understand the Potential Health, Safety, and

Environmental Impacts of Hazardous Substances

Awareness on Occupational Limits

Understand Knowledge on Safe Use, Storage, Handling,

and Transportation of Hazardous Substances



Training on Use, Handle, Transport, Storage & Disposal of

Hazardous Substances


This is a one-day training to provide knowledge, understanding, and skills to safety use, handle,

transport of dangerous substances with a particular focus on Control of Substances Hazardous Health

(COSHH) regulations and Risk Assessment

Who Should Attend

Senior Executives, Director,Managers and Engineers in the



& Superintendents



Process Operation

Procurement

Facility Planners

Speakers







practice.






13/15

Workshop Topic

Basics of Electricity

Electrical Hazards in Refineries and Substations

Static Electricity

o Tank Farmo Anti-static Additiveso Earthing &Bonding

Lockout/Tag Out Procedure

Use of Certified Equipment in Hazardous LocationsUL Lightning Installer Program

Exercises



Overview on Electrical Safety


This is a one-day workshop to understand the hazards associated with electrical energy and are

capable of safety carrying out the desired functions. This workshop will also cover the basic of

electrical concepts, potential hazards and system for management of electrical works and retrofitting

of existing installations.

Who Should Attend

Senior Executives, Director,

Managers and Engineers in thefollowing functions:


& Superintendents



Process Operation

Procurement

Facility Planners

Speakers







practice.






14/15

Workshop Topic

What is Risk Assessment?

Identification of Hazards

Frequency of Hazards

Evaluation of Risk

Documentation and Implementation of Findings and Evaluation

Review of Assessment and Update

Exercise

Discussions, Questions, and Answers


Understanding Risk Assessment


This is a one-day workshop to help participants understand the concept of Risk Assessment and how

to develop mitigation plans. The workshop can help participants from different functions identify

potential risks in their area of work, evaluate the extend of impact and implement immediate actions

to control, minimize and eliminate them.




Senior Executive

Strategic Planning


& Superintendents


Quality, Health & SafetyProcess Operation

Procurement

Facility Planners

Speakers





field of fire equipmentevaluation and industry

practice.






15/15

Workshop Topic

RC14001 Technical Specification

Policy Development

Planning and Implementation of Responsible Care

Management System

Continuous Improvement

Management Reviews

Group Exercises



Introduction of Responsible Care RC14001


This one-day workshop introduces participants to the concept of Responsible Care based on the

international standard, RC 14001, that is being widely adopted by players in the process industry

globally. This workshop will focus on understanding the clauses adopted in the standard from the

perspective of policy development to planning, implementation and continuous improvement.





& Superintendents



Process Operation

Procurement

Facility Planners

Speakers







practice.





Documents

Oil & Gas Brochure for Indonesia (Sylabus)