OIL EQUIPMENT - Petromax

The Right Products for the 21st Century

OIL EQUIPMENT MANUFACTURING, LLC.4 Hershey Drive • Ansonia, CT 06401 • 203.736.8886 • Fax 800.532.3073 • www.oil-equip-mfg.com

OIL EQUIPMENT M A N U F A C T U R I N G L L C

KING® COMBINATION FILL ALARM AND GAUGES• Nitrophyl Float is impervious to petroleum products• Tangle-Free “Solid Link” hinge withstands rough handling• Durable cast iron with corrosion-resistant powder coating• Available to fit both Vertical and Horizontal tank applications• Large, easy-to-read, plastic vile includes UV inhibitors, and is the most break resistant on the market• Two rubber gaskets enable the gauge to meet up to 5 psi air test requirements

King Combination Fill Alarm and Tank GaugePart # Tank Application Thread Size

BottomMale (NPT)

TopFemale (NPT)

4522 VERTICAL 1-1/2” x 1-1/4”4523 VERTICAL 2” x 1-1/4”4524 VERTICAL 1-1/2” x 1-1/2”4525 VERTICAL 2” x 1-1/2”4526 VERTICAL 2” x 2”4529 HORIZONTAL 1-1/2” x 1-1/4”4530 HORIZONTAL 2” x 1-1/4”4531 HORIZONTAL 1-1/2” x 1-1/2”4532 HORIZONTAL 2” x 1-1/2”4533 HORIZONTAL 2” x 2”

VERTICAL------- fi ts Tanks with 42-44” Dia

HORIZONTAL--- fi ts Tanks with 26-27’ Dia

Gauges available to fi t Tanks with Diameters up to 70”




• Nitrophyl Float is impervious to petroleum products. • Tangle-Free “Solid Link” hinge withstands rough handling• Available to fi t both Vertical and Horizontal tank applications• Large, easy-to-read, plastic vile includes UV inhibitors, and is the most break resistant on the market• Two rubber gaskets enable the gauge to meet up to 5 psig air test requirements• Float assembly can be removed without removal of zinc tank bushing; allowing insertion of measuring stick• Rustproof zinc bushing

KING® LEAKPROOF TANK GAUGES

King Leakproof Tank GaugesPart Number Tank Application Thread Size

Male (NPT)

4488 VERTICAL 1-1/2”4489 VERTICAL 2”4486 HORIZONTAL 1-1/2”4487 HORIZONTAL 2”

VERTICAL------- fi ts Tanks with 42-44” Dia

HORIZONTAL--- fi ts Tanks with 26-27’ Dia

Gauges available to fi t Tanks with Diameters up to 70”




KING® FILL ALARMS• Sizes to fi t most popular above-ground and in-ground tanks• Durable cast iron with corrosion-resistant powder coating• Whistles while tank is being fi lled; stops whistling when oil has reached safe capacity level

All KING® Fill Alarms are powder coated to prevent rust and stains.

Standard Fill Alarms• Industry’s widest range of male and female

NPT sizes• Available in sizes from 1-1/4”x1” to 2”x2”

Union Connection Fill Alarms• Available in 1” and 1-1/4” sizes• Ideal for retrofi tting existing tanks

Compression Lock Fill Alarms• Simplifi es 8-out-of-10 installations• Eliminates time consuming threading• Available in 1” and 1-1/4” sizes

Standard Fill AlarmsPart Number Stem Length Thread Size

BottomMale (NPT)

TopFemale (NPT)

4508 5-1/4” 1-1/4” x 1”4509 5-1/4” 1-1/4” x 1-1/4”4510 5-1/4” 1-1/2” x 1”4511 5-1/4” 1-1/2” x 1-1/4”4512 5-1/4” 1-1/2” x 1-1/2”4514 5-1/4” 2” x 1-1/4”4515 5-1/4” 2” x 1-1/2”4517 5-1/4” 2” x 2”

* 4516 9-3/4” 2” x 2”* 4518 16-3/4” 2” x 2”* 4519 21-7/8” 2” x 2”

* Recommended for Large and Underground Tanks

Compression Lock Fill AlarmsPart Number Thread Size

BottomMale (NPT)

TopFemale (NPT)

4550 1 x 14552 1-1/4” x 1-1/4”

Union Connection Fill AlarmsPart Number Thread Size

BottomMale (NPT)

TopFemale (NPT)

4558 1 x 14560 1-1/4” x 1-1/4”




Double Tapped BushingsPart

NumberSize Hex

Male Female4566 1” x 1/2” Outside4567 1-1/4” x 3/8” Inside 4568 1-1/4” x 1/2” Inside 4569 1-1/4” x 3/4” Outside4570 1-1/4” x 1” Outside4571 1-1/2” x 3/8” Outside4572 1-1/2” x 1/2” Inside 4573 1-1/2” x 3/4” Inside 4574 1-1/2” x 1” Outside4575 1-1/2” x 1-1/4” Outside4576 2” x 3/8” Inside 4577 2” x 1/2” Inside 4578 2” x 3/4” Inside 4579 2” x 1” Inside 4580 2” x 1-1/4” Outside4581 2” x 1-1/2” Outside4584 2-1/2” x 1-1/4” Inside 4585 2-1/2” x 1-1/2” Inside 4586 2-1/2” x 2” Outside4588 3” x 1” Inside 4589 3” x 1-1/4” Inside 4590 3” x 1-1/2” Inside 4591 3” x 2” Inside 4592 3” x 2-1/2” Inside

DOUBLE TAPPED TANK BUSHINGS

Outside Hex2” NPT x 1-1/2” NPT

Item #4581

Inside Hex4” NPT x 2” NPT

Item #4603

Double Tapped BushingsPart

NumberSize Hex

Male Female4596 3-1/2” x 1-1/2” Inside 4597 3-1/2” x 2” Inside 4599 3-1/2” x 3” Outside4600 4” x 1” Inside 4601 4” x 1-1/4” Inside 4602 4” x 1-1/2” Inside 4603 4” x 2” Inside 4604 4” x 2-1/2” Outside4605 4” x 3” Inside 4609 6” x 4” Inside

• The most complete range of sizes available anywhere• Double tapped full NPT female threads• Rugged design has solid hexes for secure wrench grip• Can be used as reducing bushings for continuous piping




DUPLEX TANK BUSHINGS

3-Way TapSlip-Thru Male Compression Fitting

• Gray iron casting, 2” male NPT, for above ground or underground installations

• Single bottom NPT tap allows protection of supply tubing

• Available with or without fi ttings • Fittings available for 3/8”, 1/2”, and

5/8” copper tubing

4-Way TapSlip-Thru Male Compression Fittings

• Solid gray iron casting, 2” male NPT, for above ground or underground installations

• Two bottom NPT taps allow for protection of both supply and return tubing

• Available with or without fi ttings • Fittings available for 3/8”, 1/2”, and 5/8”

copper tubing

Copper tube sizes shown are outside diameter.

• Available in Triple-Tap and Four-Tap designs• Ideal for two line, suction and return installations• Available with or without brass Slip-Thru compression fi ttings

4-Way Tap (Slip-Thru Male Compression Fittings)Complete with Fittings

Part Number Bushing Male NPT

Compression Fittings

4475 2” 3/8” x 3/8”4476 2” 1/2” x 1/2”4477 2” 5/8” x 5/8”4478 2” 3/8” x 1/2”

Tank Bushing OnlyPart Number Bushing

Male NPTCompression Fittings

4479 2” 3/8” x 3/8”4480 2” 1/2” x 1/2”

3-Way Tap (Slip-Thru Male Compression Fittings)Complete with Fittings



4468 2” 3/8” x 3/8”4469 2” 3/8” x 1/2”4470 2” 1/2” x 1/2”4471 2” 5/8” x 5/8”

Tank Bushing OnlyPart Number Bushing Compression Fittings

Male NPT4472 2” 3/8” x 3/8”4473 2” 1/2” x 1/2”




3-Way Tap Slip-Thru Compession Union

• Solid gray iron casting for above ground or underground installations

• Available in 1-1/2” and 2” NPT• Single bottom NPT tap allows protection

of supply tubing• Complete with fi ttings for 3/8” or

1/2” copper tubing

3-Way Tap Double Compression Nut

• Economical zinc die cast design, 2” NPT, for above ground installations only

• Single bottom NPT tap allows protection of supply tubing

• Complete with fi ttings for 3/8” copper tubing

DUPLEX TANK BUSHINGS• Available in Triple-Tap and Four-Tap designs• Ideal for two line, suction and return installations• Available with or without brass Slip-Thru compression fi ttings

3-Way Tap (Slip-Thru Compression Union)Complete with Fittings



4446 1-1/2” 3/8” x 3/8”4447 2” 3/8” x 3/8”4448 2” 1/2” x 1/2”

3-Way Tap (Double Compression Nut)Complete with Fittings



4434 2” 3/8” x 3/8”

Copper tube sizes shown are outside diameter.




FILL CAPS• Available in sizes from 1-1/2” to 8”• Locking and non-locking covers• Vented and sealed designs• Models for fl ush applications, including N.Y.C. approved

Flush Fill Caps• Rust-resistant galvanized cast iron body• Ideal for fl ush installations in fl oors,

driveways, and lawns• Solid bronze cover with gasket seals

tightly• Cover opens with pass key (sold

separately)• Available in 1-1/2” to 8” female NPT• N.Y.C. approved (meets N.Y. City

requirements) in 2” to 4” female NPT, with L.H. threads available in 2” and 3” sizes

Flush Fill CapsPart # Threads4181 1-1/2” Female NPT4182 2” Female NPT4183 2-1/2” Female NPT4184 3” Female NPT4185 4” Female NPT4186 6” Female NPT4187 8” Female NPT

N.Y.City Approved 4307 2” Female NPT4308 3” Female NPT4309 4” Female NPT

* 4316 2” Female NPT* 4317 3” Female NPT

* Cap and Cover have L.H. Threads

Hinged Fill Caps• Economical locking design• Cast iron construction• Male NPT caps in 1-1/2” and 2” sizes• Female NPT caps in 1-1/2” through 4” sizes• Vented design keeps out debris and water

One-Piece Fill Caps• Economical one-piece design• Available in cast iron or aluminum• 2” female NPT• Opens with pass key (sold separately)

One Piece Fill CapsPart # Threads4040 2” Female NPT Cast Iron4045 2” Female NPT Aluminum

Hinged Fill CapsPart # Threads4163 1-1/2” Male NPT4164 2” Male NPT4170 1-1/2” Female NPT4171 2” Female NPT4173 3” Female NPT4174 4” Female NPT




Lockable Hasp Type Fill Caps• Solid cast iron construction, with

malleable iron hasp• Brass cover with gasket provides a

waterproof seal• Available in 2” and 3” female NPT sizes

FILL CAPS• Available in sizes from 1-1/2” to 8”• Locking and non-locking covers• Vented and sealed designs• Models for fl ush applications, including N.Y.C. approved

Fill Cap Keys• Two-Way Key fi ts Fill Caps: 4181, 4182, 4183, 4184, 4185 4307, 4308, 4309, 4316, 4317• Six-Way Key fi ts 90% of all caps Strong malleable iron design

Heavy Duty Hinged Fill Caps• Durable locking design• Available in Black Iron, or with rust-

resistant Galvanized fi nish• Choice of male or female 2” NPT • Vented design keeps out debris and

water

Heavy-Duty Hinged Fill CapsPart # Threads6016 2” Female NPT Black Iron6116 2” Female NPT Galvanized6017 2” Male NPT Black Iron6117 2” Male NPT Galvanized

Lockable Hasp Type Fill CapPart # Female NPT4058 2”4060 3”

Fill Cap KeysPart # Type4349 Six-Way Key4365 Two-Way Key




VENT CAPS• Available in threaded and slip-on designs• Slip-On design solves clearance problems• Rust-resistant galvanized cast iron, as-well-as rust-proof aluminum and zinc castings• Available in sizes from 3⁄4” to 4”• Each cap includes a screen, to prevent debris from entering the vent pipe

Mushroom Vent Caps• This popular style is used in the majority

of installations in the United States, Alaska, and Canada

• Available in female NPT sizes from 3/4” to 4”

• Each cap is designed with a 30 mesh screen, to prevent debris from entering the vent pipe

Zinc Slip-On Cap• OEM’s most economical design• Zinc alloy won’t rust• Slip-on design only requires

~1/16” pipe-to-wall clearance• Supplied with set screw and wire

mesh screen• Available in sizes from 3/4” to 1-1/2”

Aluminum Slip-On Vent Cap• These caps are ideal for “close-to-wall”

Installations. Requires only ~1/8” pipe-to-wall clearance

• Rust proof cast aluminum design includes an integral screen

• Cap is secured to pipe using a single set screw

Aluminum Slip-On Vent Caps

Part # Size4009 2”4010 3/4”4011 1”4012 1-1/4”4013 1-1/2”

Zinc Slip-On Vent CapsPart # Size4006 3/4” - 1”4007 1-1/4”4008 1-1/2”

Mushroom Vent CapsPart # Threads

Male NPT4021 3/4”4022 1”4023 1-1/4”4024 1-1/2”4025 2”4026 2-1/2”4027 3”4028 4”




ACCESSORIES

Heavy Duty Manhole Covers• Provides protection for fi ll caps• Cast iron construction, with non-skid tread surface• Cover is notched for easy removal• Available in 8” and 10” sizes

Heavy-Duty Manhole CoversPart Number Size

4393 8”4394 10”

Hinged Curb Boxes• Provides protection for two or more fi ll caps or

other openings• Lockable cover is designed for heavy traffi c• Available in 11” x 11” and 16” x 16”

Curb BoxesPart Number Size

4379 11”x11” Square4381 16”x16” Square4387 Curb Box Key

Barrel Pumps• Self-priming, heavy-duty suction pumps• Seamless steel cylinder, with leak-tight steel piston• Cast iron base step-threaded with 1-1/2” and 2”

male NPT threads

Barrel PumpsPart Number Size

4686 Pint per Stroke4687 Quart per Stroke

Water FInding Paste• A daub on your measuring stick will turn vivid red

in contact with water• Hundreds of tests from a single jar

Water Finding Paste Part Number Size

4000 2-1/2 oz. Jar

Extension Coupling• Rugged cast iron design• Male to Female NPT• Available in 2” and 3” sizes

Extension CouplingsPart Number Size

4371 2”4373 3”

Galvanized Close Nipples

Part # Size4003 1”4001 2”4002 3”4004 4”

Galvanized Close Nipples• Available in 1”, 2”, 3”, and 4” sizes• Rust-resistant Galvanized interior

Fresh Air Plates and Clamps• 7” dia. Polished aluminum plates• Steel clamps to fi t 3” and 4” dia. Pipes

Fresh Air PlatesPart Number Size Material

6007 7” Aluminum

Clamps for Fresh Air PlatesPart Number Size Material

6013 3” Steel6014 4” Steel




REPLACEMENT PARTS

Gaskets for Flush Fill CapsPart Number Size

4213 1-1/2”4214 2”4215 2-1/2”4216 3”4217 4”4218 6”4219 8”

Gaskets for N.Y.C. Fill CapsPart Number Size

4333 2”4334 3”4335 4”4336 6”

Covers for Flush Fill Caps

Part # Size

4201 1-1/2” R.H. Thread

4202 2” R.H. Thread4203 2-1/2” R.H. Thread4204 3” R.H. Thread4205 4” R.H. Thread4206 6” R.H. Thread4219 8” R.H. Thread

Covers for N.Y.C. Fill CapsPart # Size4324 2” R.H. Thread4325 3” R.H. Thread4326 4” R.H. Thread4327 6” R.H. Thread4342 2” L.H. Thread4343 3” L.H. Thread

KING Combo Gauges and Tank Gauges

Part Number Parts in Kit4495 Gauge Vile and

(2) Gaskets

Duplex Tank Bushings

3-Way & 4-Way Tap (Male Compression Fittings)

Part Number Size4482 3/8” x 3/8”4483 3/8” x 1/2”4484 1/2” x 1/2”4485 5/8” x 5/8”

3-Way Tap (Slip-Thru Compression Union)Part Number Size

4454 3/8” Nut4455 1/2” Nut4461 3/8” Sleeve4462 1/2” Sleeve

3-Way Tap (Double Compression Nut)

Part Number Size4440 3/8” Compression

Nut




SpeedFiLL™ CapsPart No. Application

3100 Fits All SpeedFiLLTM Connectors3101 NYC Flush Cap

Item #3100Item #3101 Item #3220 Item #3320

SpeedFiLL™ Straight Connectors Part No. Threads (NPT)

3212 1-1/4” Female3215 1-1/2” Female3220 2” Female3312 1-1/4” Male3315 1-1/2” Male3320 2” Male

Item #3321Item #3221

SpeedFiLL™ Straight-Cored Connectors

Part No. Threads (NPT)3216 1-1/2” Female3221 2” Female3321 2” Male

Item #3520Item #3420

SpeedFiLL™ 450 ConnectorsPart No. Threads (NPT)

3412 1-1/4” Female3415 1-1/2” Female3420 2” Female3515 1-1/2” Male3520 2” Male

Fill Pipe Nozzle Connectors

Documents

OIL EQUIPMENT - Petromax