Embed Size (px)
Citation preview
PRODUCT MANUAL
1.855.354.GROW (4769), www.ogrow.com, [email protected]
Ogrow Inc. 2 Mill St. Cornwall NY 12518
1.888.555.4769 www.ogrow.com, [email protected]
15-19 Garman Road, London N17 OUR
USA
UK
Capacity75 lbs per shelf
Ogrow Large Heavy DutyWalk-In 2 Tier 8 Shelf
Portable Lawn andGarden Greenhouse
Model # OG03-GBK7449E
AnchorsIncluded
Model # OG4979-2T8
Manual Version #02
E
E
E E
E
E
E
E
E
B
BD
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
7
E
A 2
6
X
X
A
E
E
E16
16
D
DD
26 6
D
A A
16
16
11
E
E
E
E
11
11
16
16F
G
E
16
16
16
16
G
7
C C
(17.5 in.)
QTY.
4
6
2
6
26
1
2
4
Picture QTY.
3
20
6
32
30
8
1
4
(35.5 in.)
(25 in.)
(10 in.)
(31 in.)
Number
A
B
C
D
E
F
G
Number
2
6
7
11
16
X
Y
STEP 4xD 8xE 8x16 2x2 6x6 12x11Assemble the base with the above parts.Once base is assembled build upwards using the parts listed in step 2.1
STEP 8xE 4xB 4x6 12x11 6x6 8x16 4xXThis forms the next level. Once completed build the next level with parts listed in step 3.2
STEP 8xE 2xB 4x6 8x11 2xD 6x6 8x16 4xXThis forms the next level. Once completed build the next level with parts listed in step 4.3
STEP 4xA 2xC 2xE 1x2 4x16 2x6 6x7This forms the next level. Once completed build the next level with parts listed in step 5.4
STEP 2xG 1xF 2x16This forms the �nal level. Once completed, place the cover (Y) over the frame and attach.5
STEP
6In order to have the frame connected you will need to assemble the frame by pushingdownward while connecting two rods at a time, giving it an extra force (when frame iscomplete repeat from all angles, as picture shown). This will result in a tighter and smallerframe enabling the greenhouse cover to slide on easily.
Anchor kit Assembly Instructions
Step 2Connect the top end of the rope into the strap on the top of the greenhousefor all 4 sides as image shown.
Step 3Take the other end of the rope andpass it through the bended side ofanchor as shown in �gure.Repeat the step for all 4 sides.
Step 1Hammer the anchors into the soil,placing them on all four sides ofthe greenhouse.
