1
OSS phoenix series OSS phoenix series OSS phoenix series Armor plates Armor plates Armor plates NIJ STANDARD 0101.06 Tested and verified to meet or exceed ballisc re- sistance as specified under NIJ Standard-0101.06 plus Special Rifle Treats validated NIJ CPL LISTED COMPANY Gamma Cut Single Curve Front/Back Plates—UHMLWPolyethylene, Denier CORDURA Fabric Wrap Width x Length Large: 10.0”x12.0” / 3.2lbs / Thickness: 1.1” Medium: 9.5”x 11.5” / 3.0lbs / Thickness: 1.1” Small: 8.0”x10.0” / 2.2lbs / Thickness: 1.1” Threat profile 7.62x63mm JSP 7.62x54R-L 7.62x51mm—Ball 7.62x39mm—Ball 5.56x45mm—M193 Level iII stand alone lightweight Multi hit capacity, neutrally buoyant NIJ | Naonal Instute of Jusce certified

Officer Survival Solutions (OSS) Level III 3.2 LB Plates NIJ 0101.06 Stand Alone Hard Armor Ultra Light Weight Polyethylene

Embed Size (px)

DESCRIPTION

Officer Survival Solutions (OSS) Level III 3.2 LB Plates NIJ 0101.06 Stand Alone Hard Armor Ultra Light Weight PolyethyleneThese plates are most commonly used by military Special Operations units. They are a single curve vest insert plate that is certified NIJ 0101.06 Level III Stand Alone. Manufactured from Ultra Light Weight Polyethylene. 1000 Denier CORDURA fabric finish, only 3.2 pounds, these plates are capable of withstanding multiple hits. Neutrally Buoyant Perfect for any rapid donning Active Shooter Platform for patrol officers or to comply with most tactical units requirement. • Testing Standard: Independent Special Threat Testing • Protection Type / Level: Special (Military) Special Threat Testing: • 5.56 mm x 45 mm M193 61 gr Ball (M855) • 7.62 mm x 51 mm 149 gr M80 FMJ • 7.62 mm x 54R 148 gr Light Projectile Steel (LPS) • 7.62 mm x 63 mm (JSP) Certified NIJ 0101.06 10x12 size, 1.1 thickness, 3.2lb weight, Single Curve, Gamma/SAPI Cut Visit shellbacktactical.com

Citation preview

Page 1: Officer Survival Solutions (OSS) Level III 3.2 LB Plates NIJ 0101.06 Stand Alone Hard Armor Ultra Light Weight Polyethylene

OSS phoenix seriesOSS phoenix seriesOSS phoenix series

Armor platesArmor platesArmor plates

NIJ STANDARD 0101.06

Tested and verified to meet or exceed ballistic re-

sistance as specified under NIJ Standard-0101.06 plus

Special Rifle Treats validated NIJ CPL LISTED COMPANY

Gamma Cut Single Curve Front/Back Plates—UHMLWPolyethylene, Denier CORDURA Fabric Wrap

Width x Length Large: 10.0”x12.0” / 3.2lbs / Thickness: 1.1”

Medium: 9.5”x 11.5” / 3.0lbs / Thickness: 1.1”

Small: 8.0”x10.0” / 2.2lbs / Thickness: 1.1”

Threat profile

7.62x63mm JSP

7.62x54R-L

7.62x51mm—Ball

7.62x39mm—Ball

5.56x45mm—M193

Level iII stand alone lightweight

Multi hit capacity, neutrally buoyant

NIJ | National

Institute of

Justice

certified