Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Telephone Audio Interface Products
2016 CATALOG | ENGLISH
JK Audio RemoteMix X4™ pg. 28
CellTap 4C™ pg. 7
NEW
JK Audio2
Warranty JK Audio products are covered by a Two Year Warranty to be free from defective workmanship and materials. In the event that your JK Audio product needs repair, you must call us to get an authorization, and then carefully pack and ship it to us or the nearest authorized repair center. You will pay for shipping to us and we will pay for return back to you. No free repairs will be made if the defect was caused by misuse, weather conditions, or other causes, except for defective workmanship or materials. There are no expressed or implied warranties which extend beyond the warranty here made. Prices, features, and specifications subject to change without notice.
JK Audio products are built with pride right here in Sandwich, Illinois USA.
On The WebBe sure to check out our web site. We keep it up to date with:
• New product information
• FAQ (Frequently Asked Questions)
• Products categorized by application
• Product Selection Assistant
• Article reprints
• Trade show information
Wireless Phone Compatibility Many JK Audio products provide a connection to a wireless (cell) phone. While our interface cables plug directly into the headset/earpiece jack on many phone models, there are some phones that are designed to prevent operation with third party accessories. In most cases, if you can use a generic, third party headset with your cell phone, you can use your JK Audio product as well. Also, while some wireless phones have an acceptable 2.5 mm or 3.5 mm jacks, others require a headset adapter to convert their proprietary connector to an acceptable jack. JK Audio does not offer these adapters.
Connect to Smart Phones The CN113 adapter cable is now shipping with select JK Audio products. This four conductor 3.5 mm headset adapter cable is compatible with most iPhones, Android phones, and notebook computers.
The CN113 adapter cable allows audio to be sent through the headset jack of these new phones and notebooks, allowing send and receive of voice band audio during regular calls, or full bandwidth audio using third party codec applications.
This cable ships with Daptor Two, ComPack, RemoteMix One, RemoteMix 2, RemoteMix 3.5, RemoteMix 4 and Interchange.JK Audio. Inc.
1311 E 6th Street Sandwich, IL 60548 USAtel: 800.552.8346 +1.815.786.2929 fax: 815-786-8502jkaudio.com
HOURS OF OPERATION: Monday Thru Friday: 8:30-5:00 pm CDT
What’s new at JK Audio? Our 2016 catalog introduces one re-engineered product and one new product. Our original CellTap has been reintroduced as CellTap 4C, the 4C stands for 4-conductor, or TRRS, the headset connector found on most smartphones. This new version offers the ability to record your cell phone conversation, with your voice and the caller’s voice going out to separate channels of your favorite audio recorder. RemoteMix x4 is a field mixer like no other. RMx4 offers a monitoring system that parallels the features of its mixer section. Designed for live applications that require communications between talent in high noise environments.
Be sure to check out our new web site, and add your name to our mailing list. We’ll keep you up to date with JK Audio news and product updates.
Joe Klinger President
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JK Audio, Inc. is under license.
3
Handset InterfacesQuickTap™ 6THAT-2™ 6
Wireless Audio InterfacesCellTap 4C™ 7Daptor Two™ 7Daptor Three™ 8BlueDriver-F3™ 9BlueDriver-M3™ 9
Desktop Digital HybridsBroadcast Host™ 11BlueKeeper™ 11innkeeper PBX™ 12Universal Host™ 13
Auto-Answer HybridsAutoHybrid™ 14AutoHybrid IP2™ 15innkeeper LTD™ 17
VoIP Digital HybridsAutoHybrid IP2™ 15
Remote Control InterfacesGuest Module 1™ 16RIU-IP™ 16
POTS Digital Hybridsinnkeeper LTD™ 17innkeeper 1rx™ 18innkeeper 2 & 4™ 19
POTS Talk Show SystemGuest Module™ 20Concierge 2x6™ 21
Remote BroadcastingRemoteMix One™ 22BluePack™ 23ComPack™ 24RemoteMix 2™ 25RemoteMix 3.5™ 26RemoteMix 4™ 27RemoteMix x4™ 28
Listen-Only IFB
RemoteAmp™ 30RemoteAmp Two™ 30
Intercom InterfacesInterchange™ 32BlueSet™ 33Interloop™ 34Outerloop™ 35
New for 2016
Contents
Don't know where to start? | Next: Product Selection Assistant >>
CellTap 4C™Wireless Phone Audio Tap
RemoteMix x4™4 Channel Field Mixer page 28
page 7
JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929
Play Live Recorded Audio into the Phone:
Mobile Cell Phone BlueDriver-F3 9BlueKeeper 11BluePack 23Daptor Two 7Daptor Three 8RemoteMix One 22
Single Line PhoneAutoHybrid 14Broadcast Host 11innkeeper 1rx 18innkeeper LTD 17THAT-2 6
Multi-Line Business PhoneAutoHybrid IP2 15innkeeper PBX 12THAT-2 6Universal Host 13
Broadcast Live Audio from the Field:
Mobile Cell Phone BlueDriver-F3 9BlueDriver-M3 9BluePack 23ComPack 24Daptor Two 7Daptor Three 8RemoteMix One 22RemoteMix 2 25RemoteMix 3.5 26RemoteMix 4 27RemoteMix x4 28
Single Line PhoneComPack 24RemoteMix 2 25RemoteMix 3.5 26RemoteMix 4 27
Multi-Line Business PhoneComPack 24RemoteMix 3.5 26RemoteMix 4 27
4
Record an Interview:
Mobile Cell PhoneBlueDriver-M3 9BlueKeeper 11BluePack 23CellTap 4C 7RemoteMix One 22
Single Line PhoneBroadcast Host 11innkeeper 1rx 18innkeeper LTD 17QuickTap 6THAT-2 6
Multi-Line Business PhoneAutoHybrid IP2 15innkeeper PBX 12QuickTap 6THAT-2 6Universal Host 13
ASSISTANTProduct Selection
What do you need to do?
Talk Show Systems:
Multi-Line Business Phone AutoHybrid IP2 15innkeeper PBX 12Universal Host 13
Analog Phone Lines Concierge 2x6 21Guest Module 2x6 20
5
Connect a PA System to a Phone Line:
Transmit Only AutoHybrid 14AutoHybrid IP2 15BlueDriver-F3 9Daptor Two 7Daptor Three 8THAT-2 6
Listen-OnlyAutoHybrid 14AutoHybrid IP2 15BlueDriver-M3 9Daptor Two 7Daptor Three 8QuickTap 6THAT-2 6
Full-Duplex, Talk and ListenAutoHybrid IP2 15Broadcast Host 11Daptor Two 7Daptor Three 8innkeeper 1rx 18innkeeper 2 19innkeeper 4 19innkeeper LTD 17innkeeper PBX 12Universal Host 13
Monitor IFB Program Audio:
Mobile Cell Phone BlueDriver-M3 9BluePack 23ComPack 24Daptor Two 7Daptor Three 8
Single Line or Business Phone SystemComPack 24THAT-2 6
Multiple Analog Phone Linesinnkeeper 2 19innkeeper 4 19
Balanced Program LineRemoteAmp 30RemoteAmp Two 30
Wet Party-Line IntercomBlueSet 33ComPack 24Interchange 32Interloop 34Outerloop 35RemoteAmp Two 30
Let's Start Recording | Next: Handset Interfaces >>
JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929
HA
ND
SET INTER
FACES
6
THAT-2™Telephone Handset Audio Tap
Handset Tap + Send Input. Connect the THAT-2 between your telephone and handset for quick access to audio in and out of the telephone. The THAT-2 is used by radio stations to record and play sound bites, and by TV and film sound crews to get IFB and dialog over phone lines.
Plus More Control. A push-button selects whether the handset audio or line input will be sent into the telephone. The output jacks contain a mix of audio from both sides of the conversation. The THAT-2 will emulate the type of microphone that is in the handset and allow you to send audio into many different types of analog and digital PBX sets, as well as ISDN or VoIP telephones.
QuickTap™Telephone Handset Tap
Quick and Simple. QuickTap gives you an easy way to record telephone interviews to your portable recorder or even directly to your computer sound card to be uploaded to your podcast. For group listen applications, the Output jack can be connected to a powered speaker or PA system. This jack contains a nice mix of both sides of the conversation.
SPECIFICATIONSQT Output
1/8" (3.5mm) Mono: 600 ohms / 100 mV RMS; -18 dBu nom.
Size: 2” x 2” x 1.3” (5.1 x 5.1 x 3.3 cm)
Weight: 3.4 oz. (100 g)
T2 Input
Female XLR / RCA:600-900 ohms / 250 mV RMS; -10 dBu nom.; +12 dBm max
Output Male XLR / RCA: 0-2500 ohms / 100 mV RMS; -18 dBu nom.
Size: 4.5” x 3.2” x 1.3”
Weight: 9 oz. (250 g)
QT: QuickTap, T2: THAT-2
FEATURES QT T2
» Works with analog, digital, PBX, and VoIP telephones
• •
» 3.5mm Mono Audio Out •
» XLR Input & Output •
» RCA Input & Output •
» Input & Output Level Control •
» Switch selects between carbon, dynamic or electret handset types
•
» Passive Design No Battery or AC Required
• •
XLR OR RCA
1 2 3
4 5 6
7 8
0* #
9
00:00:00LR
MENU
PLAY/REC
MIC
OR 1 2 3
4 5 6
7 8
0* #
9
WIR
ELES
S AU
DIO
INTE
RFA
CES
7
CellTap 4C™Wireless Phone Audio Tap
Capture Both Sides of the Conversation. CellTap 4C is an interview recording adapter that’s compatible with most smart phones, tablets, and notebooks that use the 4-conductor 3.5 mm TRRS headset jack. Connect CellTap 4C between the existing ear-bud headset and phone, and then connect the stereo output to a mic level input on your recorder or mixer. The transformer coupled stereo output provides the local mic on the left channel and the caller on the right channel. The local audio is a full bandwidth connection.
SPECIFICATIONSCT Output
1/8" (3.5mm) Mono: 600 ohms / 100 mV RMS; -18 dBu nom
Size: 2” x 2” x 1.3” (5.1 x 5.1 x 3.3 cm)
Weight: 3.5 oz. (100 g)
D2 Input
Balanced Female XLR: 600 ohms / 250 mV RMS; -10 dBu nom. ; 0 dBu maxUnbalanced 1/4" Mono:
Output
Balanced Male XLR: 600 ohms / 45 mV RMS; -25 dBu nom. Mic Level
Unbalanced 1/4" Mono:
Size: 4.5” x 3.2” x 1.3”
Weight: 9 oz. (250 g)
Daptor Two™Wireless Phone Audio Interface
Remote Broadcasts or IFB feeds over a cell phone? Simply plug Daptor Two into the headset jack of any wireless phone or notebook computer that accepts a third party headset or earpiece. Send and receive voice band audio from your mixer during regular calls, or full bandwidth audio using third party codec applications. You may use either the XLR input or 1/4" input, not both. Your device will recognize Daptor Two as a headset which will disable the internal mic and speaker.
FEATURES CT D2
» HD Voice Compatible (Wide-band Speech)
• •
» 4-conductor 3.5mm Headset Interface
• •
» 3.5mm Stereo Audio Output •
» Switch Selects Between Popular TRRS Configurations
•
» Screwdriver Caller Level adjustment •
» XLR Input & Output •
» 1/4" Input & Output •
» 3.5 mm TRRS Headset Jack •
» Passive Design No Battery or AC Required
• •
CT : CellTap, D2 : Daptor Two
XLR OR TRS
A S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
00:00:00LR
MENU
PLAY/REC
MIC
OR CODECA S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
| More: Wireless Audio Interfaces >>
JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929
FEATURES D3 F3 M3
» HD Voice (Wide-Band Speech) • •
» 3-pin Female XLR Input • •
» 3-pin Male XLR Output • •
» 3.5 mm Input • •
» 3.5 mm Output • •
» Trim Pot Adjusts Mic Level •
» Headset/Phone Switch • •
» Mini USB Power Jack • •
» > 18 Hours on one 9-volt Alkaline Battery
•
» >10 hours on Internal Li-Ion Battery
• •
8
D3: Daptor Three, F3: BlueDriver-F3, M3: BlueDriver-M3
Daptor Three™Wireless Audio Interface
XLR Connectivity for your Bluetooth Device. Daptor Three is a simple, professional audio interface using Bluetooth Wireless Technology. Daptor Three connects to your cell phone like any other Bluetooth enabled headset. It will also connect to any other product, such as a laptop, that allows a wireless headset connection.
Transmit, Receive or 2-way Handsfree. Daptor Three functions as either a Master or Headset device. In Master mode, Daptor Three connects to headsets or headset type devices, transmitting A2DP audio, or initiating a 2-way voice band connection to a headset. In Headset mode, Daptor Three connects to wireless phones, computers, or Bluetooth dongles, receiving A2DP audio or a 2-way Hands Free connection.
SIDE VIEW
A S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
OR
WIR
ELESS AUD
IO IN
TERFACES
F3 Input
3-pin Female XLR: 1k ohms / -34 dBu nom.
Output1/8" (3.5mm) Stereo: 1.1k ohms / -34 dBu nom.
M3 Input
1/8" (3.5mm) Stereo: 20k ohms / -10 dBu nom.
Output3-pin Male XLR: 1.1k ohms / -34 dBu nom.
F3
+ M
3
Bluetooth Wireless TechnologyStandard: 3.0
Bluetooth Profiles:HF = full duplex voice, 300Hz – 3.4kHzHF (HD) = full duplex HD voice, 50Hz – 7kHzA2DP = 30Hz – 17kHz, master to slave
Range: 50 ft (15 m)
Battery: Internal Lithium-Ion Polymer Rechargeable
Power: 120-240 VAC power supply (included)
Size: 1.1” x 4.4” (2.8 cm x 11.2 cm)
Weight: 2.1 oz. (60 g)
SPECIFICATIONSD3 Input
Balanced Female XLR: 20k ohms / -4 dBu nom.
1/8" (3.5mm) Stereo: 20k ohms / -10 dBu nom.
Frequency Response:HF = 300Hz - 3.4kHzA2DP = 30Hz - 17kHz
Output Balanced Male XLR: 200 ohms / 0 dBu max
1/8" (3.5mm) Stereo: 200 ohms / -6 dBu max
Frequency Response:HF = 300Hz - 3.4kHzA2DP = 30Hz - 17kHz
Power: One 9-volt Battery
Size: 4.5” x 3.2” x 1.3” (11.2 x 6.9 x 3.5 cm)
Weight: 9 oz. (250 g)
JK Audio9
BlueDriver-F3™Wireless Audio Interface
Mic/Mixer Output to your Bluetooth Device. Pair to your Bluetooth enabled cell phone or headset to send audio to your Bluetooth device. The 3.5 mm stereo jack contains a mic level output suitable for recording, with the clean mic signal on the left channel and the Bluetooth return on the right.
33
BlueDriver-M3™Wireless Audio Interface
Bluetooth Device to Mic Input. Pair to your Bluetooth equipped cell phone or headset to get audio straight from your Bluetooth device into your Mic input. The 3.5 mm send jack will accept a signal from the headphone output of the mixer for transmission back to the cell phone or headset.
A S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
Headset
Connect
Phone
BlueDriver-M3™JK Audio™
BlueDriver-M3 Applications
M3-A
M3-B
Power Rec Power Send
BlueDriver-F3 Applications
Connect
Phone
Headset
BlueDriver-F3™
JK Audio™
A S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
00:00:00LR
MENU
PLAY/REC
MIC
A S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
F3-A
F3-B
A switch on either unit selects between connection to a 3rd party Bluetooth headset, or a cell phone.
Headset Connect: Pair BlueDriver™ to your 3rd party Bluetooth headset. Some Bluetooth headsets allow you to switch between your audio device and a cell phone.
Phone Connect: Pair BlueDriver™ to your cell phone to call into the station or bring in caller audio.
Headset Mode vs. Phone ModeW
IREL
ESS
AUD
IO IN
TER
FACE
S
JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.292910
Broadcasting Made Easy. Connect a mic and headphones for a simple broadcast back to the station. Already at the station? Use a JK Audio Digital Hybrid in your newsroom to record high quality interviews. Or, you can upload your recorded interview to your podcast. JK Audio Digital Hybrids allows you to send mic and line level signals, at a higher quality than the phone's mic and speaker, into the phone line while maintaining excellent separation between your voice and the caller.
Interviews: Connect a professional dynamic mic and headphones to a JK Audio digital hybrid to capture your voice in full audio bandwidth, while maintaining excellent separation between your voice and the caller
Conference Room: Easily connect your PA system to the telephone system. The echo canceller algorithm prevents feedback and allow full duplex conversations.
Why a Digital Hybrid? The main function of any hybrid is to bring in the caller’s voice from the phone line, as clear and clean as possible. In the real world, when you send your voice down the telephone line it has a tendency to bleed over into the caller’s audio. The hybrid must adapt to the phone line in order to properly separate transmit and receive audio. We use a 16-bit DSP to monitor the phone line and audio signals continuously in order to deliver excellent separation. Our dual-convergence echo canceller algorithm can achieve excellent transhybrid loss, typically exceeding 50 dB, without any setup and without sending a burst of noise into the phone line.
A HYBRID FOR EVERY DESKTOP.
Turn your desktop into a professional broadcast center.
Each Hybrid includes everything you need to get talk show quality phone recordings into your mixer or sound card with
excellent caller separation.
FEATURES BH BK
» Excellent Separation of Caller and Talent Voice
•
» 16 bit DSP Technology •
» Bluetooth Wireless Technology •
» Auto-Answer (Switchable On/Off) •
» Proprietary Auto Null Algorithm (50 dB null)
•
» Send XLR Line Input • •
» Mic/Line Switch • •
» 3.5mm Mono Line Input • •
» 3.5mm Stereo Line Input •
» Caller XLR Line Output • •
» 3.5mm Stereo Line Output • •
» 3.5mm Mono Mic Level Output •
» 3.5 mm Stereo Headphone Jack • •
» Send and Caller Signal Level LEDs • •
» Send and Caller Volume Controls • •
» Guest Module Remote Jack •
innkeeper 1rx, innkeeper 2 and innkeeper 4 can be found on pg 18. Although a mixer is not required for the Desktop Digital Hybrids, it is required for the Professional innkeeper™ series and rackmount digital hybrids.
Professional Digital Hybrids pg. 18
BH: Broadcast Host, BK: BlueKeeper
Analog & Wireless/Cellular
DESKTO
P DIG
ITAL H
YBR
IDS
Analog & Wireless/Cellular
11
OR
OR
SPECIFICATIONSBH Input
Balanced Female XLR:1k ohms / 15 mV RMS; -34 dBu nom.; Mic/Line Pad Switch = +6 dBu max
1/8" (3.5mm) Mono: 20k ohms / 250 mV RMS; -10 dBu nom.
Output
Balanced Male XLR:200 ohms / 500 mV RMS; -4 dBu nom.; +14 dBu max; Caller Only
1/8" (3.5mm) Stereo:50 ohms / 250 mV RMS; +6 dBu maxLeft = Send; Right = Caller
Headphone 1/8" (3.5mm):8 ohms / 250 mW Mixed Send and Caller
Phone Line: RJ11C
Aux Phone: RJ11C
Ringer: 0.8B REN
Frequency Response: Telephone Side 200 Hz-3600 Hz
BH
+ B
K Isolation: 1500 VAC
Power: 120-240 VAC Power Supply
Size: 7" x 6" x 1.6" (18 x 15 x 4.2 cm)
Weight: 2.2 lbs. (1kg)
Broadcast Host™Analog Desktop Digital Hybrid
Our Most Popular Digital Hybrid. Broadcast Host provides connections for a microphone, headphones, mixer, sound card, telephone and your analog telephone line. An auxiliary telephone is only required to place outgoing calls. Broadcast Host features Auto-Answer/Auto Disconnect for use in IFB and monitoring applications.
Remote Control. Control Broadcast Host with the Guest Module 1. See pg 16.
BlueKeeper™Wireless Audio Gateway
No Phone Line? Not a Problem. It's the 21st century, if you replaced your home phone or you're always on the move, you can still get mic and line level audio in and out of your wireless phone. BlueKeeper pairs to your cell phone like a Bluetooth wireless headset. Simply connect your favorite microphone and headphones and enjoy an immediate improvement at both ends of the call. The professional microphone preamplifier provides a dramatic improvement in sound quality to the caller or back to the station if you are away from the studio.
OR
A S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
00:00:00LR
MENU
PLAY/REC
MIC
OR
BH: Broadcast Host, BK: BlueKeeper
00:00:00LR
MENU
PLAY/REC
MIC
GUEST MODULE 1
DES
KTO
P D
IGIT
AL
HYB
RID
S
BK Input
Balanced Female XLR:1k ohms / 15 mV RMS; -34 dBu nom.; Mic/Line Pad Switch = +6 dBu max
1/8" (3.5mm) Stereo:20k ohms / 250 mV RMS; -10 dBu nom.; +6 dBu max
Output
Balanced Male XLR:200 ohms / 500 mV RMS; -4 dBu nom.; +14 dBu max; Caller Only
1/8" (3.5mm) Mono:50 ohms / 15 mV RMS; -34 dBu nom.Mixed Send and Caller
1/8" (3.5mm) Stereo:50 ohms / 250 mV RMS; -10 dBu nom.; +6 dBu maxLeft = Send; Right = Caller
Headphone 1/8" (3.5mm):
8 ohms / ½ watt per channel Mixed Send and Caller
BluetoothStandard: 2.0
Distance: 33 ft (10 m)
Frequency Response:HF = 300Hz - 3.4kHz A2DP = 30Hz - 17kHz
Do you have an VoIP/PBX Line? | Next: VoIP/PBX Desktop Digital Hybrids >>
JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929
1 2 3
4 5 6
7 8
0* #
9
00:00:00LR
MENU
PLAY/REC
MIC
12
OR
innkeeper PBX™VoIP/PBX Desktop Digital Hybrid
The Broadcast Host for PBX Phone Lines. Innkeeper PBX easily converts your multi-line PBX type telephone system into a professional, affordable talk show console. Simply connect between your telephone handset and the phone base. So simple, anyone can do it.
innkeeper PBX provides connections for a microphone, headphones, mixer, sound card, and telephone handset. The stereo output jack on the back of the unit provides your voice on one channel and only the caller’s voice on the other channel. The balanced XLR output jack contains only the caller’s voice. The Handset and Broadcast buttons select between talking on the handset, or sending and receiving through the audio connections.
FEATURES PBX UH
» Excellent Separation of Caller and Talent Voice
• •
» 16 bit DSP Technology • •
» 16 bit USB Audio CODEC •
» Proprietary Auto Null Algorithm (50 dB null)
• •
» Send XLR Line Input • •
» Mic/Line Switch • •
» 3.5mm Mono Line Input • •
» Caller XLR Line Output • •
» 3.5mm Stereo Line Output • •
» 3.5 mm Stereo Headphone Jack • •
» Send and Caller Signal Level LEDs • •
» Send and Caller Volume Controls • •
» Handset Selector Switch (Electret, Carbon, Dynamic)
• •
OR
PBX: innkeeper PBX, UH: Universal Host
VoIP/PBX/USB CODEC
Talk Shows: Connect between your console and your existing multi-line telephone. Screen callers from another phone while you take callers on the air by simply selecting available lines on your phone.
A HYBRID FOR EVERY DESKTOP.
DESKTO
P DIG
ITAL H
YBR
IDS
1 2 3
4 5 6
7 8
0* #
9
00:00:00LR
MENU
PLAY/REC
MIC
13
Universal Host™VoIP/PBX Desktop Digital Hybrid
The Top-Notch Desktop Digital Hybrid Universal Host provides connections for a microphone, headphones, mixer, sound card, and telephone handset. The stereo output jack on the back of the unit provides your voice on one channel and only the caller’s voice on the other channel. The balanced XLR output jack contains only the caller’s voice. The Handset and Online buttons select between talking on the handset, or sending and receiving through the audio connections. A second switch selects between monitoring the caller or listening to the USB codec over the headphones.
USB CODEC for Full Bandwidth Streaming The 16 bit USB audio CODEC allows stereo recording at up to 48 kHz sampling rate, with the talent voice on the left channel in full bandwidth, and the caller on the right. Play recordings from your computer directly into the phone system.
OR
OR
DES
KTO
P D
IGIT
AL
HYB
RID
S
SPECIFICATIONSInput
Balanced Female XLR:1k ohms / 15 mV RMS; -34 dBu nom.; Mic/Line Pad Switch = +6 dBu max
1/8" (3.5mm) Mono: 20k ohms / 250 mV RMS; -10 dBu nom.
Output
Balanced Male XLR:200 ohms / 500 mV RMS; -4 dBu nom.; +14 dBu max; Caller Only
1/8" (3.5mm) Stereo:50 ohms / 250 mV RMS; -10 dBu nom.; +6 dBu maxLeft = Send; Right = Caller
Headphone 1/8" (3.5mm):8 ohms / 250 mW Mixed Send and Caller
Phone Base: RJ22
Handset: RJ22
Isolation: 1500 VAC
Frequency Response: Telephone Side 200Hz-3.6kHz
Power: 120-240 VAC Power Supply
Size: 7" x 6" x 1.6" (18 x 15 x 4.2 cm)
Weight: 2.2 lbs. (1kg)
USB *Universal Host OnlyConnector: Mini Type B Female
Standard: v2.0
Sampling Rate: 32kHz, 44.1kHz, 48kHz
Next: Auto-Answer Hybrids >>
JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929
FEATURES » Enable/Disable Auto-Answer
» Hybrid Null Adjust (Up to 20 dB Separation)
» Front Panel Off-Hook LED
» Send XLR Line Input
» Caller XLR Line Output
» Remote Control Terminals
» Rack Mountable
» Passive Design (No Battery or AC Required)
14
AutoHybrid™Full Duplex Auto-Answer Hybrid
Not just another half duplex auto-coupler. This simple, passive, auto-answer/disconnect telephone line hybrid allows simultaneous send and receive audio through analog telephone lines. Suitable for monitoring remote locations, IFB feeds, and many simple studio, conferencing, and PA telephone interface applications.
Full Duplex. Yes, you can send and receive audio at the same time. The dual transformer hybrid is capable of 20 dB nominal trans-hybrid loss. In other words, your transmit signal will appear mixed with the receive signal, but at a level 20 dB lower than it was sent into the phone line.
Auto-Answer. The "Auto" feature is very simple. When the "Auto" switch is selected, AutoHybrid will answer on the first ring. The phone line will remain off-hook, until either the Drop button is depressed, or until the phone company releases the line.
RA4™ Rack Mount Panel
ACCESSORIES
The RA4 holds four AutoHybrids in a 1U rack space.
AUTO
-AN
SWER
HYB
RID
S SPECIFICATIONSInput
Female XLR:1k ohms / 500 mV RMS; -4 dBu nom.; +6 dBm max
Insertion Loss: 11dB Send XLR to Phone Line
Output Male XLR: 600 ohms / 200 mV RMS; -12 dBu nom.
Screw Terminals:
Off-hook control (+5VDC Momentary)
Release Control (+5VDC Momentary)
OH LED Signal (pulled to ground on OH)
Phone Line: RJ11C
Aux Phone: RJ11C
Ringer: 0.8B REN
Isolation: 1500 VAC
Frequency Response: Telephone Side 200 Hz-3600 Hz
Size: 4” x 5” x 1.5” (10.5 x 13 x 4 cm)
Weight: 12 oz.
ACCESSORIES RA2™ Rack Mount Panel The RA2 holds two AutoHybrid IP2s in a 1U rack space.
VOIP
DIG
ITA
L H
YBR
IDS
SPECIFICATIONSInput
Female XLR:20k ohms / 500 mV RMS (-4 dBu nom) +12 dBu max
Output
Balanced Male XLR:50 ohms / 500 mV RMS (-4 dBu nom) +12 dBu max
Remote Jack:RJ50 Proprietary interface to JK Audio products
Remote Header:Removable screw terminal block:Call, Drop, Ring/OH LED, GND (x2)
Power:PoE (Power over Ethernet) or +9 VDC with included AC power supply
Size: 7.6” x 5.3” x 1.5” (20 x 14 x 4 cm)
Weight: 1.2 lbs (0.5 kg)
AutoHybrid IP2™VoIP/AoIP Codec
A Smooth Transition from POTS to IP. This simple product plays a critical role in studio interview, monitoring, and IFB applications.
As the name implies, AutoHybrid IP2™ functions as a two-line VoIP hybrid. The desktop/half-rack design provides one button access to the common features of a phone line hybrid including: call control, auto-answer, and conference. Advanced call control features and VoIP line setup are provided through the internal web server. In VoIP mode, Line-level XLR jacks provide mono send and receive audio for Line 1 and Line 2.
AutoHybrid IP2™ also functions as an Audio over IP (AoIP) Codec, streaming wide-band stereo audio. In AoIP mode, the XLR jacks provide stereo send and receive audio.
The AutoHybrid IP2™ Remote jack allows easy connection to the JK Audio Interchange™ Intercom Phone Bridge, offering an auto-answer VoIP connection into your party-line intercom.
Low power consumption for Power over Ethernet (PoE) applications. External power supply included for LAN connections without PoE capability.
FEATURES » Simple 2-Line VoIP Call Control, Auto-Answer,
and Conference
» G.711, G.722 (HD Voice) VoIP Hybrid
» 24-bit AoIP Wide Band Stereo Codec
» Female XLR Line Input (2)
» Male XLR Line Output (2)
» Send and Receive LED Metering
» LAN, USB, Remote Control Connections
» Rear Panel Recessed Level Controls
» Remote Control I/O Terminal Block
» PoE or AC Mains Powered
» Optional RA2 Rack Mount Adapter
NETWORK
15Next: Professional Digital Hybrids >>
16
SPECIFICATIONSControl connection: RJ-45 Ethernet port
Digital Hybrid Connection: RJ-50
RS-232 Serial Connection: DB9 (9600,8,N,1)
Size: 5" x 3.25" x 1.125" ( 13 x 9 x 3 cm)
Weight: 1 lb. (450 g)
RIU-IP™Remote IP InterfaceThe RIU-IP is a remote control interface designed for innkeeper 1rx, 2 and 4 digital hybrids. This unit contains a web server which lets you send and receive control data through a web browser. RIU-IP can be connected to a computer NIC card for direct control, to a switch or hub for network control, or to an ethernet port with internet access.
RIU-IP was designed exclusively for: Innkeeper 1rx, innkeeper 2 & 4
Guest Module 1™Remote KeypadThis little time-saver gives you call control you simply can't get with an auxiliary telephone and a couple of switches. An 8 pin RJ45 modular cable provides remote power so there is no need for batteries or an external power pack. The Call button will flicker when a call comes in. Press this button to answer or place a call. The button will stay lit when a call is present. When you dial on-air, the tones go out on the line, and do not come back mixed with the dial tone or caller signal.
Guest Module 1 was designed exclusively for: Broadcast Host, innkeeper LTD, or innkeeper 1rx
FEATURES » Compatible with innkeeper 1rx, innkeeper 2
and innkeeper 4 Digital Hybrids
» Ring Indicator for Each Line
» Call, Drop, Hold, Flash
» Dialing
» Conference (innkeeper 2)
» Adjust Transmit and Receive level per line (innkeeper 2 & 4)
» Auto-Answer on/off
» Auto-Answer Ring Count (innkeeper 2 and 4)
» Test Tone Start/Stop per Line
» Master Send Configuration (innkeeper 2 and 4)
» Presence On/Off (innkeeper 1rx)
» Caller Ducking On/Off (innkeeper 1rx)
» Automatic Gain Control on/off (innkeeper 1rx)
REMOTE CONTROL INTERFACES
FEATURES » Compatible with Broadcast Host, innkeeper LTD,
and innkeeper 1rx
» DTMF Keypad
» Keypad Disable Switch
» Talk/Dial Button
» Hang-up Button
» Ring/Call LED
» Passive Design (No Battery or AC Required)
SPECIFICATIONSSize: 4.75" x 3.4" x 2" (12 x 8.6 x 5 cm)
Weight: 11 oz (300 g)
16
17
SPECIFICATIONSInput
Balanced Female XLR:20k ohms / 500 mV RMS; -4 dBu nom.; +12 dBm max
Output
Balanced Male XLR:200 ohms / 500 mV RMS; -4 dBu nom.; +14 dBu max
Phone Line: RJ11C
Aux Phone: RJ11C
Ringer: 0.8B REN
Isolation: 1500 VAC
Frequency Response: Telephone Side 200 Hz-3600 Hz
Power: 120-240 VAC power supply (included)
Size: 7.6” x 5.3” x 1.5” (20 x 14 x 4 cm)
Weight: 2.7 lbs (1.2 kg)
ACCESSORIES
innkeeper LTD™Digital Auto-Answer Hybrid
Go digital for more desirable quality. Compared to the AutoHybrid, the innkeeper LTD auto-answer/disconnect hybrid allows you to send line level signals into the phone line while maintaining greater separation between the talent's voice and the caller. The balanced XLR output jack contains only the caller’s voice, making this the perfect companion to mixers, consoles, and PA systems that demand talk show quality audio from a phone line.
16-bit DSP Technology. The digital hybrid connects audio signals to a standard analog telephone line without the transmit / receive crosstalk common to analog hybrids. Its Digital Signal Processor (DSP) continuously monitors both the phone line and audio signals to deliver excellent separation. This proprietary, dual-convergence echo canceller algorithm can achieve excellent separation, typically exceeding 50 dB, without any setup and without sending a noise burst down the line. While this may sound complicated, it’s all done automatically during every call.
Remote Control. Control innkeeper LTD with the Guest Module 1. See pg 16.
RA2™ Rack Mount Panel The RA2 holds two innkeeper LTD's in a 1U rack space.
GUEST MODULE 1
Next: More Professional Digital Hybrids >>
FEATURES » Enable/Disable Auto-Answer
» Excellent Separation of Caller and Talent Voice
» 16-bit DSP technology
» Proprietary Auto Null Algorithm (50 dB null)
» Front Panel Off-Hook LED
» Send XLR Line Input
» Caller XLR Line Output
» Send and Caller Signal Level LEDs
» Guest Module 1 Remote Control Jack
» Rack Mountable
POTS
DIG
ITA
L H
YBR
IDS
JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.292918
FEATURES 1x i2 i4
» Excellent Separation of Caller and Talent Voice
• • •
» 16 bit DSP Technology • • •
» Auto-Answer (Switchable On/Off) • • •
» Proprietary Auto Null Algorithm (50 dB null)
• • •
» Conferencing •
» AGC, Ducking, Presence •
» 1 kHz Tone Generator • • •
» Memory/Speed Dial • •
» Alpha-Numeric Keypad • •
» Menu with Backlit LCD Display • •
» Send XLR Line Input 1 2 4
» Mic/Line Switch •
» Master Send XLR • •
» Caller XLR Line Output 1 2 4
» Mix Out XLR Line Output •
» Front Panel 1/4" Headphone Jack •
» Monitor Handset Jacks 2 4
» Remote Control via Screw Terminals or RS-232
• • •
» RIU-IP Remote IP Interface • • •
» Monitor Speaker Terminals •
» Send and Caller Signal Level LEDs • • •
» Send and Caller Volume Controls • • •
innkeeper 1rx™Digital Hybrid
A Hybrid Jam-Packed with Features. This single-line hybrid is perfect for radio or television talk shows, teleconferencing, or auto-answer IFB feeds. From the front panel you can call, drop and adjust headphone volume. Front panel LEDs display signal levels and option status. The Send and Caller Volume controls and feature switches are hidden behind an access panel to prevent unauthorized “tweaking”. innkeeper 1rx is compatible with Guest Module 1 and RIU-IP remote control interfaces. For Talk Show applications combine innkeeper 1rx with the Concierge 2x6 Switch Core and Guest Module GM2x6 ( on page 21).
Automatic Gain Control (AGC). Adjusts the caller volume to an average level. AGC will tame a loud caller, and boost a quiet caller or quiet long distance connection.
Caller Ducking. Drops the Caller output level by 9 dB whenever the host speaks. This keeps the host “in charge” of the show, automatically making sure the caller never overpowers the host by attempting to talk over the host’s voice.
Presence. Press the “Presence” button to get a richer sound from the caller’s voice. This digital filter brings back some of the low-end lost in transmission.
Remote Control. Control innkeeper 1rx with the Guest Module 1, Screw Terminals, a RS-232 cable or the RIU-IP Remote IP Interface. See pg 16.
1x: innkeeper 1rx, i2/4: innkeeper 2 & 4
ORGUEST MODULE 1
POTS D
IGITA
L HYB
RID
S
19
innkeeper 2 & 4™Multi-Line Digital Hybrids
When a Single Line Hybrid Isn't Enough. Innkeeper 2 / innkeeper 4 squeeze two/four independent digital hybrids in a 1U rack space to extract each caller's voice into separate channels. Each phone line has an individual send and receive XLR jack. While this should be enough for most applications, there are several applications that require a “Master” audio input. This additional XLR input mixes with the audio of the individual channel send jacks. By default, the master input will mix into all four channels. The front panel menu system allows you to turn off the master signal from any or all phone lines. For Talk Show applications combine innkeeper 2 with the Concierge 2x6 Switch Core and Guest Module GM2x6 ( on page 21).
Menu System. The front panel keypad, display, and handset jacks provide easy speed dialing and call setup. The menu driven keypad and back-lit display allows you to store 50 phone numbers by name in a phone list. You can also use the display to set features such as the number of rings before auto answer, master send channel selection, and test tone output.
innkeeper 2 Conferencing. Innkeeper 2 has a convenient conference feature that joins two active phone calls together. Menu options determine how the conference is joined, providing several options to ease mix-minus setup.
Remote Control. Control innkeeper 2/4 with the RIU-IP Remote IP Interface. See pg 16.
1x: innkeeper 1rx, i2/4: innkeeper 2 & 4
Back: innkeeper 2 innkeeper 4 is the same, with additional lines and XLR inputs/outputs.
SPECIFICATIONS1x Input
Female XLR:1k ohms / 15 mV RMS; -34 dBu nom.; Mic/Line Pad Switch = +6 dBu max
Output
Male XLR:200 ohms / 500 mV RMS; -4 dBu nom.; +14 dBu max
1/4" Stereo Headphone: 8 ohms, 250 mW per channel
Speaker: Screw Terminals, 8 ohms, 1 watt
Size (1x):(1rx):
1.75" x 7.3" x 10.5" (4.5 x 18.6 x 26.7 cm)1.75" x 7.3" x 19" (4.5 x 18.6 x 48.3 cm)
Weight (1x):(1rx):
5.2 lbs (2.4 kg)5.7 lbs (2.6 kg)
i2/4 Input
Balanced Female XLR:20k ohms/ 500 mV RMS; -4 dBu nom.; +10 dBu max
Output
Balanced Male XLR:200 ohms/ 500 mV RMS; -4 dBu nom.; +10 dBu max
Handset:Front panel handset jacks biased for electret handset (not included)
Size: 1.75" x 7.3" x 19" (4.5 x 18.6 x 48.3 cm)
Weight: 7.2 lbs (3.2 kg)
1x +
i2/4
Phone Line: RJ11C
Aux Phone: RJ11C
Ringer: 0.8B REN
Isolation: 1500 VAC
Frequency Response: Telephone Side 200Hz-3.6kHz
Power:120-240 VAC 50-60Hz power supply (internal)
Need more lines? | Next: Concierge Talk Show System >>
POTS
DIG
ITA
L H
YBR
IDS
Guest Module™Control Surfaces
Simple on the Outside. Up to eight Guest Module control surfaces can be added to provide remote control of the switch matrix over CAT5 cable. Guest Modules are hot swappable without losing calls, and feature line selection buttons that change color to indicate call status. Guest Modules are available in GM1x6, GM2x6, and GM1x12 desktop and rack mount versions. They feature durable aluminum and steel construction with a sealed rubber keypad.
FEATURES » LED Line Selection Buttons
» Next, Previous, Hold & Drop Functions
» Auto Answer
» Conference Calling (not on GM1x6)
» Hot-Swappable
» Aluminum and steel construction
» DTMF Keypad
GM: Guest Modules, C: Concierge 2x6
20
Concierge™ Talk Show System
Next: Field Interview Tools >>
Concierge 2x6™ Switch Core
The Heart of the System. The new Concierge™ 2x6 switch core routes six incoming analog phone lines to JK Audio innkeeper 1rx™ or innkeeper 2™ Digital Hybrids. Concierge adds music on hold input, auxiliary phone integration, and intuitive call control. Two Concierge switch cores can be bridged together, providing six additional phones lines for a 2 hybrid, 12 line system.
FEATURES » 6 Phone line jacks
» 2 Hybrid Connections
» Hold Audio Input
» Expandable to 2 x 12 Lines
» LED Line Status Indicators
» Front Panel DIP switches
INNKEEPER
INNKEEPER
GUEST MODULE2nd CONCIERGE
21
TALK
SH
OW
SYS
TEM
SPECIFICATIONSGM GM1x6, GM2x6, GM1x12 C Power: 120-240 VAC power supply (included)
Size: 9.5” x 3.5” x 1.2” ( 24 x 9 x 3 cm ) Phone Line: RJ11
Weight: 1.25 lbs ( 0.5 kg ) Isolation: 1500 VAC
GM1x6r, GM2x6r, GM1x12r Frequency Response: Telephone Side 200Hz-3.6kHz
Size: 19” x 3.5” x 1.2” ( 48 x 9 x 3 cm ) Size: 1.75” x 7.3” x 19” ( 4.5 x 18.6 x 48.3 cm )
Weight: 1.75 lbs ( 0.8 kg )
JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.292922
RemoteMix One™Field Interview Tool
A Little One On One. RemoteMix One™ performs live man-on-the-street interviews through your cell phone and can provide two-way IFB connections through a cell phone or notebook for truly flexible remote monitoring.
Wireless Phones and Notebooks: Connect to cell phones and notebooks through the wired headset jack. A 3.5 mm stereo line input jack allows recordings to be mixed into the broadcast. The 3.5 mm stereo line output jack provides your full bandwidth microphone signal on the left channel and the return audio on the right channel.
Use as a headset replacement for normal voice calls, or transmit full bandwidth audio using third party CODEC apps. Interchangable interface cables connect to most phones and notebooks.
ORA S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
CODEC
00:00:00LR
MENU
PLAY/REC
MIC
FIELD IN
TERVIEW
R1: RemoteMix One, BP: BluePack
FEATURES R1 BP
» HD Voice (Wide-Band Speech) • •
» Bluetooth Wireless Technology •
» 3-conductor 2.5mm Headset Interface •
» 4-conductor 3.5mm Headset Interface •
» Headphone, Mic, and Line Input Level Controls
• •
» XLR Mic Input • •
» Mic Mute Switch •
» 3.5mm Stereo Line Input • •
» 3.5mm Stereo Line Output • •
» ¼" Stereo Headphone Jack • •
» >10 Hours on one 9V Alkaline Battery •
» >20 Hours on one 9V Alkaline Battery •
23
SPECIFICATIONSR
1 +
BP Input
Female XLR: 2k ohms / -34 dBu nom.
1/8" (3.5mm) Stereo: 20 k ohms / -10 dBu nom.
Output 1/8" (3.5mm) Stereo: 100 ohms / -10 dBu nom.
1/4" Stereo Headphone: 8 ohms, ½ watt per channel
Size: 4.7” x 3.75” x 1.65” (12 x 9.5 x 4.2 cm))
Weight: 10 oz (275 g)
BP Bluetooth Wireless Technology
Standard: 3.0
Distance: 65 ft (20 m)
Frequency Response:HF = full duplex voice, 300Hz – 3.4kHzHF (HD) = full duplex HD voice, 50Hz – 7kHzA2DP = 30Hz – 17kHz, master to slave
BluePack™Wireless Interview Tool
When it Gets Down to the Wire. And one of your cables has gone rogue, it's time for field reporting that is a little more portable. Don't get wrapped up in unnecessary cables. BluePack allows live man-on-the-street interviews through a cell phone equipped with Bluetooth Wireless Technology.
Wireless Phones and Notebooks: BluePack pairs to your cell phone like a Bluetooth wireless headset. BluePack also pairs to Bluetooth equipped sound cards and music players in full bandwidth stereo A2DP mode. A 3.5 mm stereo line input jack allows recordings to be mixed into the broadcast.
The 3.5 mm stereo line output jack provides your full bandwidth microphone signal on the left channel and Bluetooth audio on the right channel. Like any phone call, live interviews are limited to 3.4 kHz voice bandwidth back to the station. However, this output allows you to make a full bandwidth recording to bring back to the station or send over the web.
ORCODECA S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
00:00:00LR
MENU
PLAY/REC
MIC
FIEL
D IN
TER
VIEW
Next: Remote Broadcasting >>
JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929
OR
OR
OROR
A S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
1 2 3
4 5 6
7 8
0* #
9
INTERCOM
FEATURES » HD Voice (Wide-Band Speech) Compatible
» Works with Analog and Digital PBX or VoIP Phones
» 3-conductor 2.5mm Headset Interface
» 4-conductor 3.5mm Headset Interface
» Headphone, Mic, and Line Input Level Controls
» XLR Mic Input *(Mic/Line Switch)
» XLR Line Output *(Switches to Com Link)
» 3.5mm Stereo Line Input
» ¼" Stereo Headphone Jack
» Transmit Clip LED
» Battery Test LED
» DTMF Keypad and Lockout Switch
» Handset Selector Switch (Electret, Carbon, Dynamic)
» >20 Hours on one 9V Alkaline Battery
ComPack™Universal Telephone Audio Interface
Remotely Anywhere. Pick up this new handheld road tool to get audio in and out of analog phone lines, PBX systems, even cell phones. Perfect for Remote Broadcasts, IFB feeds, or interviews over any phone connection.
Wireless Phones and Notebooks. Simply plug ComPack into the 2.5 mm or 3.5 mm headset jack of your wireless phone or notebook computer. Your cell phone will recognize ComPack as a headset which will disable the internal mic and speaker.
PBX Systems. Unplug the handset from any analog or digital PBX phone and plug the coily cord into ComPack. You can now send and receive audio through the PBX telephone set.
Analog Phones. Plug ComPack into an RJ-11 jack, go off-hook and dial, or answer an incoming call.
Add a Phone Line to the Party Line. ComPack also functions as a simple telecom interface for your beltpack intercom system. This no-frills feature allows you to connect the 3 pin male XLR to your wet party line. This provides a full duplex, always-on connection to any telephone network.
SPECIFICATIONSInput
Female XLR: 1k ohms / 15 mV RMS; -34 dBu nom.; Mic/Line Pad Switch = +6 dBu max
1/8" (3.5mm) Stereo: 20 k ohms / 250 mV RMS; -10 dBu nom.
Output
Male XLR: 600 ohms / 45 mV RMS; -25 dBu nom.
1/4" Stereo Headphone: 8 ohms, 1/2 watt
Phone Line: RJ11C
Isolation: 1500 VAC
Ringer LED: 0.9B REN
Keypad: DTMF
Power:9 volt battery AC power supply 120-240 VAC (included)
Size: 8" x 3" x 2.2" (20.3 x 7.6 x 5.6cm)
Weight: 1.5 lbs (680 g)
FIELD IN
TERVIEW
RemoteMix 2™Broadcast Field Mixer
The Handy, Compact Mixer. RemoteMix 2 is a two-channel field mixer / headphone amplifier that’s a little more hands-on in the remote broadcast environment. We’ve tightened the belt on this one. It may be smaller but we didn’t skimp out on the good stuff. RemoteMix 2 provides a communications interface for remote broadcast, IFB, or a backup audio path. The integrated headphone amplifier provides sidetone to monitor all inputs as well as an external feed. RemoteMix 2 features a phone line hybrid with keypad along with a wired notebook/cell phone headset interface. These parts were designed to work together, saving setup time and wiring in the field.
TV - Use a Phone Line or Wireless Phone for Real Time Production Monitoring. RemoteMix 2 Combines a small front-end mixer with two powerful ¼” headphone outputs. Send and receive interview audio while pulling IFB off the phone line, cell phone or notebook.
Radio - Perfect for live remotes. Use it as a front-end mixer for your POTS, VoIP or smart phone codec. Or, use it as a phone line hybrid, calling in to your studio talk show hybrid.
FEATURES » HD Voice (Wide-Band Speech) Compatible
» Two XLR Mic Jacks
» Mic/Line Pad on Channel 2
» Two ¼” Headphone Jacks with Individual Level Controls
» 3.5 mm Send and Receive Jacks
» LED VU Meter
» Phone Line Hybrid with DTMF Keypad
» Wired Phone Headset Interface (2.5mm & 3.5mm Interfaces)
» Dual 9 Volt Batteries
» 100-240 VAC External AC Power Supply
SPECIFICATIONSInput
Female XLR Mics: 2k ohms / -25 dBu nom (Mic/Line pad switch = +6 dBu max)
1/8” (3.5mm) Stereo Line: 20k ohms / -10 dBu nom
Headphone Cue 1/4”: 20k ohms / -10 dBu nom
OutputBalanced Male XLR: +16 dBu max, 20Hz - 20kHz, +/- 1dB
1/8” (3.5mm) Stereo: 100 ohms / -10 dBu nom
Headphone 1/4” Stereo: 8 ohms / 1/3 watt per channel
Phone Line Connector: RJ11C
Ringer: 0.5B REN
Isolation: 3750 VAC
Power:100-240 VAC, 50-60Hz or Two 9 VDC batteries
Size: 7.75” x 6.5” x 2.3”
Weight: 2.1 lbs (960 g)
OR
CODEC
IPA S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
OR
00:00:00LR
MENU
PLAY/REC
MIC
CUECODEC
OR
REM
OTE
BRO
AD
CAST
ING
25Next: More Field Mixers >>
JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.292926
* RemoteMix 3.5 only has a Mic/Line pad on Channel 3.
RemoteMix 3.5™Broadcast Field Mixer
More than just a field mixer. These are universal communications interfaces. RemoteMix 3.5 and RemoteMix 4 feature a phone line hybrid and keypad, a PBX handset interface, and both wired and wireless cell phone interfaces.
Radio. Perfect for sports remotes. These field mixers can be used as a phone line hybrid, calling into your studio talk show hybrid, or as a front-end mixer for your POTS, VoIP, or smart phone codec.
TV. RemoteMix 3.5 and RemoteMix 4 give you the ultimate phone connectivity with multiple ¼” IFB headphone feeds. Send and receive interview audio and pull IFB out of any business phone system, even your cell phone or notebook.
OR
OR
CODEC
IP
1 2 3
4 5 6
7 8
0* #
9
A S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
CUE
OR
00:00:00LR
MENU
PLAY/REC
MICA S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
CODEC
AB C
D
E
REM
OTE B
ROA
DCASTIN
G
FEATURES 3.5 4
» HD Voice (Wide-Band Speech) • •
» XLR Mic Jacks 3 4
» Switchable 48 volt phantom power for each mic input
•
» Mic/Line pad on channels 3 & 4* • •
» ¼” Headphone Jacks with Individual Level Controls
3 4
» 3.5 mm Send and Receive Jacks • •
» LED VU Meter • •
» Phone Line Hybrid with DTMF Key-pad with Redial
• •
» Universal PBX Handset Interface • •
» Wired Phone Headset Interface (2.5mm & 3.5mm Interfaces)
• •
» Bluetooth Wireless Technology • •
» Bass Boost •
» Dual 9 Volt Batteries • •
» 100-240 VAC External AC Power Supply
• •
27
OR
CUE
OR
CODEC
IP
1 2 3
4 5 6
7 8
0* #
9
OR
00:00:00LR
MENU
PLAY/REC
MIC
A S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
A S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
CODEC
Great Sound. In our remote field mixers, a soft limiter prevents overdriving the phone line interfaces, while the mixer's XLR output is pre-limiter (full range). Convenient 3.5 mm send and receive jacks for recording the show, or mixing in your MP3 player. Exclusive to the RemoteMix 4, Bass Boost adds some low end before sending the signal down the phone line.
Power Smart Design. Low noise, low power ICs are used throughout either of these mixers to preserve battery life. The low noise 100-240 VAC desktop style power supply (included) overrides the battery power only when the supply is actually providing power. If the power goes out, the batteries automatically cut in. The phantom power generator in the RemoteMix 4 only runs if any of the rear panel 48 V switches are set to “ON”.
RemoteMix 4™Broadcast Field Mixer
A. Dial in with the internal phone line hybrid,
B. Connect through any PBX or VoIP telephone through the Universal Handset Interface,
C. Plug into the headset jack of your phone or notebook,
D. Pair to any Bluetooth audio device
E. Use as a front end mixer for your CODEC.
AB C
D
E
Talk about backup... Five ways to get the signal back to the station.
REM
OTE
BRO
AD
CAST
ING
SPECIFICATIONSInput
Female XLR Mics: 2k ohms / -25 dBu nom (Mic/Line pad switch = +6 dBu max)
1/8” (3.5mm) Stereo Line: 20k ohms / -10 dBu nom
Headphone Cue 1/4”: 20k ohms / -10 dBu nom
OutputBalanced Male XLR: +16 dBu max, 20 Hz - 20 kHz, +/- 1dB
1/8” (3.5mm) Stereo: 100 ohms / -10 dBu nom
Headphone 1/4” Stereo: 8 ohms / 1/3 watt per channel
Bluetooth Wireless Technology
Frequency Response:HF = full duplex voice, 300Hz – 3.4kHzHF (HD) = full duplex HD voice, 50Hz – 7kHzA2DP = 30Hz – 17kHz, master to slave
Distance: 33 ft (10 m)
Phone Line Connector: RJ11C
PBX Interface: RJ22
Ringer: 0.5B REN
Isolation: 1500 VAC
Power:100-240 VAC, 50-60Hz or Two 9 VDC batteries
Size: 9.5” x 8” x 3”
Weight: 3.8 lbs (1.72 kg)
Next: More Field Mixers >>
JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929
FEATURES » Four Low Noise, High Headroom, XLR mic inputs
(Mic/Line Switches on Channels 3 & 4)
» Individually Switchable 48v Phantom Power
» 120 Hz Low Cut Filter
» Master XLR Output 20 Hz – 20 kHz
» Four ¼” Headphone Jacks with Individual Source Selector and Level Controls
» ¼” Headphone Cue Input
» Phone Headset Interface with 3.5 mm TRRS plug
» 3.5 mm Stereo Line Input
» 3.5 mm Send and Receive Jacks
» LED VU Meter
» Hot Swappable Dual 9V Batteries and 120-240 VAC External Power Supply
Mix It Up. RMx4 combines a four-channel field mixer with a four-channel headphone amplifier. After all, what good is a field mixer if you don’t have a flexible monitoring capability for the whole crew?
Great Sound. A soft limiter prevents overdriving the full-duplex headset interface, while the master XLR and 3.5 mm outputs are pre-limiter (full range). Line level cue input to the headphones make RMx4 a perfect companion to your codec or recorder.
Convenient. 3.5 mm send and receive jacks for recording or playing back recorded material. Separate headphone level and source selection controls for each headphone output. Monitor just the clean mixer output, or the Cue input plus the mix.
Power Smart Design. Switchable 48V Phantom Power on each mic input. Powered by 1 or 2 hot-swappable 9V batteries that automatically kick in if AC power goes down. Low noise, low power ICs are used throughout to preserve battery life. The 100-240 VAC desktop style power supply (included) overrides the battery power only when the supply is actually providing power.
Radio. RMx4 is designed for news and sports remotes. Use it as a front-end mixer for your POTS, ISDN, IP or smart phone codec. XLR out, ¼” return to headphones.
TV. RMx4 is designed for ENG, Sports, and interviews, with four ¼” headphone outputs. 3.5 mm TRRS provides 2-way IFB audio from your cell phone or notebook.
28
RemoteMix x4™4 Channel Field Mixer
FIELD M
IXER
S
Crowd too loud? | Next: IFB Listen-Only Monitoring >> 29
CUE
OR
CODEC
OR
00:00:00LR
MENU
PLAY/REC
MIC
A S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
CODEC
SPECIFICATIONSInput Output
Female XLR Mics (4):2k ohms / -25 dBu nom Channel 3 & 4 have -40 dB Mic/Line pad switch Line = 50k ohms / +20 dBu max
Balanced Male XLR:50 ohms / +16 dBu max 20 Hz - 20 kHz +/- 1dB 0.04% THD @ +16 dBu
Phantom Power: 48 VDC with 6.8k ohm supply resistance 1/8” (3.5mm) Stereo: 100 ohms / -10 dBu nom
1/8” (3.5mm) Stereo Line: 20k ohms / -10 dBu nom Headphone 1/4” Stereo: 8 ohms / 1/3 watt per channel
1/4” Headphone Cue: 20k ohms / -10 dBu nom
Power:100-240 VAC, 50-60Hz or Two 9 VDC batteries
Size: 9.5” x 8” x 3”
Weight: 3.6 lbs (1.6 kg)
FIEL
D M
IXER
S
JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.292930
RemoteAmp™Mono Headphone/Earpiece Amplifier
Cuts through the Crowd Noise. The RemoteAmp is a simple battery-powered personal headphone amplifier. Use the RemoteAmp as an IFB earpiece or headphone amplifier. This low-distortion, 1 watt amplifier will cut through the crowd noise without distortion.
The RemoteAmp clips to your belt and accepts a 3-pin XLR audio input from a mixer. You’ll like the convenient features, such as the separate power switch, which allows you to leave the volume control set at a comfortable level.
SPECIFICATIONSRA Input
Female XLR:4k ohms / 100 mV RMS; -18 dBu nom.; +12 dBu max;46 dB maximum gain
Output1/4" Stereo Headphone: 8 ohms, 1 Watt max
3.5 mm Mono Earpiece: 150 ohms, 100 mW nom.
Size: 5.1 x 2.7 x 1.3 inch (13 x 6.9 x 3.3 cm)
Weight: 10 oz. (275 g)
RA: RemoteAmp, R2: RemoteAmp Two
FEATURES RA R2
» Compatible with Party-Line Intercoms
•
» XLR Line level Input • •
» XLR Line In Volume Control • •
» 3.5 mm Stereo Line Input Jack •
» 3.5 mm Line In Volume Control •
» 1/4" Stereo Headphone Jack • •
» 3.5 mm Earpiece Jack • •
» Stainless steel belt clip • •
» >20 Hours on one 9V Battery • •
OR
OR
INTERCOM
FOUR IFB
RemoteAmp Two™Stereo Headphone Amplifier
Mono IFB Plus Stereo Audio Input. RemoteAmp Two provides a listen only connection for mono IFB or full bandwidth stereo music listening. Separate volume controls for the XLR and 3.5 mm line input jacks allow a simple mix of mono and stereo sources. The XLR line level input accepts either a balanced mono signal, or a party line intercom feed (listen-only). The ½ watt, ¼” stereo headphone jack will cut through any crowd noise.
OR
FOUR IFB
R2
Input
Female XLR: 20k ohms / 0 dBu nom.
3.5 mm Stereo: 20k ohms / -10 dBu nom.
Output1/4" Stereo Headphone: 8 ohms, ½ watt per channel
3.5 mm Mono Earpiece: 100 ohms, 40 mW
Frequency Response: 20 Hz – 20 kHz
Power: One 9 volt Alkaline Battery
Size: 4.7” x 3.75” x 1.65” (12 x 9.5 x 4.2 cm)
Weight: 10 oz. (275 g)
LISTEN-O
NLY IFB
Outerloop is your beltpack for the other side of the telecom link. Connect your favorite wired intercom headset to Outerloop to use your headset anywhere. Pair Outerloop with BlueSet or Interloop, or pair to your mobile phone to call into an Interchange Intercom Phone Bridge.
INTERCOM ACCESS ANYWHERE
Leave your beltpack behind. BlueSet plugs into the headset jack of your existing belt pack. Interloop connects to the existing Party Line intercom system like any other belt pack. Pair either of these with a BSET-HS1 oryour exisiting wireless headset for an extended range of mobility, unrestricted by the cables.
Interchange is the missing link between your Party Line intercom and the telecom world. Connect Interchange to a JK Audio AutoHybrid IP2 for VoIP access. Connect Interchange to a JK Audio innkeeper Digital Hybrid for POTS lines. Use the headset interface with your mobile phone when POTS and VoIP are not an option.
EXTENDED RANGE INTERCOM INTERFACES
ADD A WIRELESS HEADSET
CONNECT TO A MOBILE PHONE
CONNECT TO A VOIP, POTS OR MOBILE PHONE LINE
Interloop™BlueSet™
Outerloop™
Interchange™
BlueSet and Interloop connect to a wireless phone allowing remote access or a backup telecom connection.
INTERCOM-TELECOM LINK
BRING A BELTPACK AND HEADSET WITH YOU FOR...
page 34
Interloop™
page 34
BlueSet™
page 33
page 33
page 32
page 35
WIRELESS INTERCOM SOLUTIONS
31Next: Intercom Interfaces >>
INTE
RCO
M IN
TER
FACE
S
JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.292932
INTERCO
M IN
TERFACES
HYBRIDINTERCOM
FEATURES » HD Voice (Wide-Band Speech) Compatible
» Male and Female 3 pin XLR Intercom loop jacks
» Male and Female 3 pin XLR 4-wire jacks
» Male XLR Mix Line Out for Monitoring
» Send and Receive LED metering
» Front panel screwdriver level controls
» Front panel Channel Select
» Front panel cell phone interface
» Listen always, Talk when Talk-Enabled
» Intercom and phone hybrid powered
Interchange™Intercom Phone Bridge
The Missing Link. Interchange allows remote access to your party-line intercom through JK Audio Innkeeper Series Digital Hybrids. This professional half rack interface provides a four wire audio interface and remote control connection for JK Audio innkeeper LTD, innkeeper 1rx, or innkeeper 2 Digital Hybrids for POTS lines. Likewise, couple a JK Audio PBXport with an Interchange for PBX/VoIP lines. The front panel headset interface jack allows easy connection of your cell phone, tablet, or computer allowing remote access through a wireless phone or conferencing app.
Interchange contains a sophisticated intercom hybrid in a low noise pro audio design. The Listen-Always design allows both the phone hybrid / 4-wire connection and the cell phone headset interface to monitor the intercom just like any other belt pack. Listen mode is a high impedance bridging tap on the intercom line. Talk mode is enabled via a front panel switch, either Off, On, or Auto. Auto follows the phone hybrid Auto-Answer mode. Talk mode uses a solid state relay to properly couple Talk audio from the phone line and cell phone interfaces, to the intercom channel.
The Innkeeper 2 conference feature allows two callers to share one intercom connection. Alternatively, the included cables allow Line 1 and Line 2 of the Innkeeper 2 to be connected to two separate Interchange™ units, allowing connection to separate intercom loops.
ACCESSORIES RA2™ Rack Mount Panel The RA2 holds two Interchanges in a 1U rack space.
SPECIFICATIONSXLR Intercom Channel
Output Level: 0 dBu ( 775 mV ) nominal
Terminating Impedance: 200 ohms
Bridging Impedance: >15k ohms
Pin 1: Common
Pin 2: Audio + 30 VDC ( +12 VDC min ) 50 mA
Pin 3: Audio
Input
Balanced Female XLR:20k ohms / 500 mV RMS (-4 dBu nom) +12 dBu max
Output
Balanced Male XLR:200 ohms / 500 mV RMS (-4 dBu nom) +12 dBu max
Size: 7.6” x 5.3” x 1.5” (20 x 14 x 4 cm)
Weight: 1.2 lbs (0.5 kg)
SPECIFICATIONSOutput
1/8” (3.5mm) Stereo: 1000 ohms / 15 mv RMS; -34 dBu nom.
Bluetooth Wireless Technology Standard: 3.0
Distance: 50 ft (15 m)
Frequency Response:HF = full duplex voice, 300Hz – 3.4kHzHF (HD) = full duplex HD voice, 50Hz – 7kHz
Battery: Internal Lithium-Ion Polymer rechargeable
Power: 120-240 VAC power supply (included)
Size: 1.1” x 4.4” (2.8 cm x 11.2 cm)
Weight: 2.1 oz (60 g)
33
INTE
RCO
M IN
TER
FACE
S
FEATURES » HD Voice (Wide-Band Speech)
» Electret / Dynamic Headset Compatibility
» 3.5 mm Mic Level Output
» Mini USB Power Jack
» >10 hours on Internal Li-Ion Battery
» Trim Pot adjusts Bluetooth Return
Extend your intercom | Next: More Wireless Party-Line Solutions >>
BlueSet™Wireless Headset Interface
Communications Unleashed. These headset interfaces plug directly into most Party-Line (PL) belt packs, replacing the wired headset. A 3.5 mm stereo headset jack contains a mic level output signal suitable for recording, with the beltpack headphone signal on the left channel, and the Bluetooth return signal on the right. A switch selects between connection to a 3rd party Bluetooth headset or a cell phone.
Headset Connect: Leave your belt pack on the desk as you walk around the room. Some Bluetooth headsets allow you to switch between two phones, or in this case, switch between your intercom and your cell phone.
Phone Connect: Pair BlueSet to your cell phone to grant remote access to the Party-Line for a distant member. The belt pack Mic/Talk button controls audio from the cell phone into the intercom system.
Intercom Headset Compatibility: Female and Male XLR four and five pin versions available: BlueSet-F5, BlueSet-M5, BlueSet-F4, BlueSet-M4.
A S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
A S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
OR
JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.292934
OR
Interloop™Wired/Wireless Intercom BeltPack
Stay in the Loop. Interloop™ works with industry standard Two-Wire, Party-Line intercoms, connecting to the existing intercom system like any other belt pack. Utilizing Bluetooth Wireless Technology, a rear panel switch selects Headset or Phone connection. Headset mode allows you to connect to a Bluetooth enabled headset for wireless freedom. Phone mode allows you to connect to a wireless phone to let others join in, or connect to a notebook or laptop to provide remote voice access using VoIP applications such as Skype™.
Battery Backup. Powered by the intercom system, yet uses less current than a typical belt pack. Includes 9 VDC battery backup, holding the wireless connection while changing cables.
Increased Range. While Interloop™ will work with any Bluetooth enabled headset, most headsets were designed to work a short distance from the phone. JK Audio Outerloop and BlueSet offer increased range and performance making it the perfect match.
IL: Interloop, OL: OuterloopIN
TERCOM
INTER
FACES
A S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
A S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
INTERCOM
FEATURES IL OL
» HD Voice (Wide-Band Speech) • •
» 2.4 GHz Encrypted Digital Wireless •
» 3-pin XLR Male and Female Intercom Jacks
•
» Connects to Bluetooth Headsets, Phones, & Notebooks
•
» Uses Standard Intercom Headsets •
» 4-Pin and 5-Pin Male or Female Headset Jacks
•
» Send and Receive Volume Controls • •
» PTT Button • •
» Intercom Powered with 9 Volt Battery Backup
•
» > 10 hours On One 9 Volt Battery Backup
•
Outerloop™Wireless Intercom BeltPack
In the Loop, Out of Bounds. Outerloop™ functions as a wireless link to your intercom system. This universal belt pack provides connections for your existing 4-pin or 5-pin intercom headset, routing audio through your mobile device over a Bluetooth wireless connection. Use your cell phone to call into your intercom phone bridge or station phone coupler for a global wireless link.
Universality. Adapting to the mixed-up intercom world, model OTL-F features both 4-pin and 5-pin Female XLR headset jacks, while model OTL-M features both 4-pin and 5-pin Male XLR headset jacks. Easy-to-use send and receive level controls, a push-on, push-off Talk button, as well as a recessed sidetone level control. All the comforts of a standard belt pack whether you are around the corner or around the world.
Outerloop also features a switch that selects between pairing to a phone or to a headset. In Phone mode, Outerloop pairs to your cell phone or computer just like any other Bluetooth headset. In Headset mode, you can pair to another Outerloop or to a standard Bluetooth headset, providing a short range secure wireless point-to-point intercom. Outerloop-to-Outerloop connections default to HD Voice (120 Hz to 7 kHz) bandwidth. Outerloop also offers increased range and performance with JK Audio Interloop and BlueSet. Many new Bluetooth wireless cell phones and headsets also provide HD Voice bandwidth.
35
INTE
RCO
M IN
TER
FACE
S
A S D F G H J K L
ALT Z X C V B N M $
Q W E R T Y U I O P # 1 2 3 ( ) _ - + @
* 4 5 6 / : ; ’ ” DEL
* 7 8 9 ? ! , .
OR OR
OUTERLOOP-M
SPECIFICATIONSIL XLR Intercom Channel
Output Level: 0 dBu ( 775 mV ) nominal
Terminating Impedance: 200 ohms
Bridging Impedance: >15k ohms
Pin 1: Common
Pin 2: +30 VDC ( +12 VDC min ) 35 mA
Pin 3: Audio
OL Model Outerloop-F
Headset: 4-pin Female XLR, 5-pin Female XLR
Model Outerloop-MHeadset: 4-pin Male XLR, 5-pin Male XLR
Headset MicrophoneImpedance: 50-2000 ohms
Headset EarpieceLoad Impedance: 50-600 ohms
Power: >50 mW into 150 ohms
IL +
OL Bluetooth
Standard: 3.0
Profile: Hands Free (HF)
Distance: 65 feet (20 Meter)
Frequency Response:HF = full duplex voice, 300Hz – 3.4kHzHF (HD) = full duplex HD voice, 50Hz – 7kHz
Power:IL: Intercom System & 9 VDC Battery BackupOL: 9 VDC Battery
Size: 4.7” x 3.75” x 1.65”(12 x 9.5 x 4.2 cm)
Weight: 10 oz ( 275 g )
JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929
JK Audio1311 E 6th Street Sandwich, IL 60548 USA
Address Service Requested
© 2016 JK Audio, Inc. Printed in the USA 9/14
1-800-JK-Audio1-800-552-8346 • 1-815-786-2929Se Habla Español
Great Sound and Greater Monitoring. Low noise, high headroom mic preamps and a 120 Hz low cut rumble filter. Powerful headphone amps drive four 1/4” IFB headphone outputs. Monitor the mics, cue input, or IFB return from a cell phone or laptop.
Power Smart Portability. Switchable 48V Phantom Power on each mic input. Powered by dual hot-swappable 9V batteries that auto-matically kick in if AC power goes down
Mix It Up
RemoteMix x4™
RMx4™ 4 Channel Field Mixer
Pg 28