OEM Automatic Klitsø - Electronics Produktionshjælpemidler

ELECTRONICSPRODUKTIONSHJÆLPEMIDLER

2

3

4

SwEDEN – OEM Electronics ABP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se

FINLAND – OEM Electronics OYFiskarsinkatu 3 FI-20750 TurkuPhone: +358 207 499 300 | Fax: +358 207 499 496 [email protected] | www.oemelectronics.fi

POLAND – OEM Electronics PLul. Postepu 2, PL-02-676 WARSZAWAPhone: +48 22 863 27 22 | Fax: +48 22 863 27 24

[email protected] | www.oemelectronics.pl

system/ PARt NO descRiPtiON NOmiNAl POweR tOtAl PeAk POweR temP. selectiON betweeN

BD-2BABD-2SA

Digital soldering station with 2-lines readout display and menu for modification of values from original setting 75W 60/140 W 90-450 °C

CD-2BASoldering station 230V For general electronics jobs. Includes control unit BD, handpiece T245-A, cartridges C245-003 and C245-007

75W 140 W 90-450 °C

CD-2SASoldering station 230VFor high precision solder joints.Incudes control unit BD, handpiece T210-A, cartridge C210-001 and 210-008

75W 60 W140 W 90-450 °C

Entry line Soldering Stations

SOLDERINg AND dESOLdERINg STATIONS

Single line Soldering Stationssystem/ PARt NO descRiPtiON NOmiNAl POweR tOtAl PeAk POweR temP. selectiON betweeN

CF-2A

Solder feed station 230VDesigned for repetitive soldering or when you need a free hand. Equiped with solder feed iron of 1mm diameter.Includes AP control unit, AP-A solder feed iron, C130-403 cartridge.

75W 140 W 90-450 °C

CP-2AMicro tweezers station 230VFor soldering and desoldering SMD components with micro-tweezer. Includes control unit PA, PA-A micro hot tweezers and 2 x C120-002 cartridge.

2 x 20W 2 x 40 W 90-450 °C

Single line Desoldering Stationssystem/ PARt NO descRiPtiON NOmiNAl POweR tOtAl PeAk POweR temP. selectiON betweeN

CS-2A

Electric system 230VElectric suction system powered by control unit DSV or electric vacuum pump MS-A.Includes control unit DSV, DS-A micro desoldering iron with tip C360-004, MS-A electric vacuum pump.

20W 30 W 300-450 °C

CV-2A

Pneumatic system 230VPneumatic suction system with dial for temperature selection. Includes control unit DSV, DS-A micro desoldering iron with tip C36-004, pneumatic suction system feeded by compresed air max 6 bar.

20W 30 W 300-450 °C

5

NORwAY – OEM Electronics ABP O Box 1025 (Norrabyvägen 6B) SE-573 29 TranåsPhone: +46 75 242 45 00 | Fax: +46 75 242 45 [email protected] | www.oemelectronics.se

DENMARK – OEM AUTOMATIC KLITSØ A/SEngholm Parkvej 4 dK- 3450 AllerødPhone: +45 70 10 64 00 | Fax: +45 70 10 64 [email protected] | www.oemklitso.dk

THE BALTICS – OEM Eesti OÜKanali tee 1-328, EE-10112 TallinnPhone: +372 6550 871 | Fax: +372 6550 873 [email protected] | www.oem.ee


system/ PARt NO descRiPtiON NOmiNAl

POweRtOtAl PeAk POweR

temP. selectiON betweeN weight

DIT-2A Soldering station 230VFor general electronic applications. Includes control unit DI-2A, stand AD-SA, soldering iron T245-A and cartridge C245-003

75 W 140 W 300-450 ºC 2 kg

DIR-2ASoldering station 230VFor high and medium precision solder-joints.Includes control unit DI-2A, soldering iron T210-A, cartridge C210-001 ad stand AD-SA

75 W 140 W60 W 300-450 ºC 2 kg

DIT and DIR Soldering Stations, one channel

DIS Desoldering Stationsystem/ PARt NO descRiPtiON NOmiNAl



DIS-2A

Desoldering station 230V.For desoldering insertion componenets and cleaning circuits with SMD components.Includes control unit DI-2A, desoldering iron with tip C560-003, stand DR-SA, MS-A suction module electric system and accessories set.

75 W 140 W 300-450 ºC 2 kg

DSS-2A

Micro desoldering station 230V.For desoldering small and medium-sized insertion components; high-precision station with small measurements. Includes control unit DI-2A, desoldering iron DS-A with tip C360-004, stand DS-SA, MS-A suction module electric system and accessories set.

75 W 140 W 300-450 ºC 2 kg

DIN Nitrogen Soldering Station 230Vsystem/ PARt NO descRiPtiON NOmiNAl



DIN-2A

The DIN-2A nitrogen soldering station combines 2 ways of transferring heat: - By direct contact between the solder tip and the solder joint, just like a normal soldering iron. - By nitrogen which is heated when flowing through the soldering tip. Includes DI-SA control unit, stand DN-SA, nitrogen handpiece T245-NA with C245-003.MN-A nitrogen flow regulator. N2 flow regulation:: 0,5-3,5 LPM at 5 Bar.Max pressure:6 Bar.

75 W 140 W 90-450 ºC 1,2 kg

system/PARt.NO descRiPtiON

GN-A

• Compressed air pressure: 4 to 6 Bar• Gas N2 concentration: up to 99,9%• Concentraded N2 gas flow: 1 to 2 NL/min.• Weight: 2 kg

GN-A Nitrogen module generatorAn externa nitrogen circuit is needed or the nitrogen generator from JBC GN-A


6





system/PARt NO descRiPtiON NOmiNAl POweR

tOtAl PeAk POweR

sleeP mOde POweR

hibeRNAtiON mOde POweR weight

temP. selectiON betweeN

ddst-2A

Soldering and desoldering station 230 V The station offers a complete solution for fast and safe repair of insertion component circuits by suction of hte solder. The station can also be used for cleaning pads in SMD circuits.

2 x 75W 2 x 140W 2 x 10W 2 x 4W 4.5 kg 90-450 °C

DDST Rework Station

system/PARt NO descRiPtiONmAxi-mum POweR

temP.selectiON

temP. ROOm

AiR flOw RegulAtiON

PROtected AgAiNst ANtistAtic dischARge

tOtAl weight

Jt-2A

A high power hot air station used for desoldering all types of SMD's. Its powerful heater desolders even the biggest QFPs and PLCCs quickly and safely. Desoldering small and mediumsized BGAs is done in a very short time.

1000 W °C room -

450°C and "cool"

6-45 l/min Yes 8,7 kg

JT High Power Hot Air Station 230 V

system/PARt NO descRiPtiONPOweR mAx Out

temP. selectiON

vARiAble AiR flOw settiNgs

tOtAl weight

te-2AA precision hot air station ideal for soldering and desoldering small and medium-sized SMD components.Autonomus hot air station, digital, thermo regulated with air flox control.

300 Wroom -

450°C and "cool"

between 4 and 11 l/

min6,7 kg 90-450 °C

TE Hot Air Station 230V

iNcludes

Control unit DD-2AHandspiece T245-ACartridge C245003Desoldering DR-ATip C560-003Stand AD-SA and DR-SASuction electrical system MS-ASet of tools and accessories

iNcludes Jt-2A iNcludes Jt-2QA

Control unit JTE-2AHeater 1000 WExtractor stand with 5 extractors, 5 protectors and 2 tripodsHeater standSet of accessories

Control unitStandHeater handle 1000 W No accessories

iNcludes te-2A iNcludes te-2QA

Control unit JTE-2AHeater 300 WHeater stand JT-SAAccessoriesExtractor stand with 2 tripods, 3 extractros and 5 protectors

Control unitStandHeater handle 300 W No accessories


7





tOtAl PeAk POweR

sleeP mOde

hibeRNAtiONs mOde

temP. RANge weight

HD-2A Ideal solution for high thermal demand and prolonged heavy duty soldering applications. Specifically designed for extensive soldering of multi-layerd circuits and parts which require high remperatures.

145 W 270 W 20 W 9 W 90-500ºC 4,5 kg

HD Heavy Duty Station 230 V

AL Automatic Solder Feed Station 230 V

PROduct descRiPtiON PARt NO

Al-iA Indispensable for using the AL system while having both hands free. For this purpose it is also necessary to use the pedal set

0964551

AL-IA Hands-free soldering arm for soldering iron AL


tOtAl PeAk POweR

sleeP mOde

hibeR-NAtiONs mOde

sOldeR wiRe diAm-teRs

temP. RANge weight

Al-2A Ideal solution for extensive soldering application, and any soldering application that requires one or two free hands.

75 W 140 W 10 W 4 W 0,5 - 1,5 mm 90-500ºC 3,2 kg

AM Rework Station 230 Vsystem/PARt NO descRiPtiON NOmiNAl

POweRPeAk POweR

POweR hOt AiR uNit

sOldeRiNg iRON temP RANge

desOldeRiNg iRON temP RANge

hOt AiRtemP. RANge

Am-2A

Designed for rework and repair of through-hole and SMT boards. The station´s 4 modules offer the following rework/repair operations: - Desoldering of SMD components of any size by hot air.- Desoldering SMT and through-hole components.- Pick & Place tip for placing components. - Soldering of any kind of components.

2 x 75 W 2 x 140 W 900 W 90-450ºC 300-450ºC 150-450ºC

iNcludes

Control unit HD-2AHandspiece T245-ACartridge C470003Stand AD-SA

iNcludes

Control unit AL-2AComplete handle AL-ACartridge C250403Stand AL-SATubes set and guides for: wires ø 0,9 - 1 mm: 00024101

iNcludes AiR flOw RegulAtiON

vAcuum PumP fOR hOldiNg ics weight sleeP mOde hibeRNAtiONs

mOde

Control unit AM-2AT245 handpiece with cartridge C245003DR-A desoldering iron with the C560-003 tip heater 1000W.MP 2260 Pick & Place Extractor stand with.5 extractors, 5 prtectors and 2 tripods.Stands for soldering iron, desoldering iron and heater. Set of accessories.

6-45 l/minx 8,1 kg 2 x 10 W 2 x 6 W

SOLDERINg AND dESOLdERINg STATIONSSOLDERINg AND dESOLdERINg STATIONS

8






PeAk POweR temP RegulAtiON weight

NAst-2A A complete station designed for micro soldering and desoldering of small-size components like chips 0201, 0402 etc.

15W 30W 90-450 °C 2.6 kg

NAST Nano Station 230 V


PeAk POweR

sleeP POweR

hibeRNAtiON POweR

temP. selectiON weight

di-2A 1-tool digital control unit features a digital read-out display for accurate temperature and tool control.

75 W 140 W 10 W 4 W 90-450 °C 2 kg

DI-2A 1 Tool Control Unit


tOtAl PeAk POweR

sleeP POweR

hibeRNAtiONs POweR

temP.selectiON weight

dd-2A

2 tools control unit 230 VOffers connectivity for working with 2 tools simultaneously.. Designed for production and rework applications with high thermal requirements.

2 x 75W 2 x 140W 2 x 10W 2 x 4W 90-450 °C 3,5 kg

dm-2A

4 tools control unit 230 VOffers connectivity for working with 4 tools simultaneously.. Designed for production and rework applications with high thermal requirements.

4 x 75W 4 x 140W 4 x 10W 4 x 4W 90-450 °C 4,5 kg

DD and DM 2- & 4- Tools digital Control Units

iNcludes

Control unit NA-2ANano soldering iron NT205-ANano tweezers NP105-ACartridge set (10 pcs)

fOR A cOmPlete stAtiON fOllOwiNg is Needed

Control unitOne tool with corresponding stand & cartridge

fOR A cOmPlete stAtiON fOllOwiNg is Needed

Control unitFrom 1 to 4 tools with its corresponding stand & cartridge


9




system/PARt NO descRiPtiON POweR suPPly tyPicAl suRfAce ResistANce

RecOmmeNded AiR PRessuRe weight

ms-AMS-A electric suction moduleElectric suction module with overdrive startup funtion that offers quick collection of solder before it cools down. This suction system is regulated by the control unit.

12 W 24 V 1015-1011 - 1,7 kg

mv-A

MV-A pneumatic suction moduleThis pneumatic suction module uses compressed air and a Venturi valve. This system offers outstanding desoldering results because of its immediate suction responsiveness. This suction system is powered by compressed unit.

3 W 24 V 1015-1011 5 Bar (max 6) 1,4 Kg

MS-A and MV-A Desoldering Suction Modules

Tip tinner TT-A

For chemical cleaning and tinning the tip at the same

time. Very efficient.

Cleaning sand CL6780

The most "aggressive" method to clean even the most oxidated tips.

Metal wool CL6205

Dry cleaning method, indispensable for lead-free soldering. Removes oxidation and facilitates tinning.

Metal brush CL6217

Cleans tips, tweezers and desoldering irons the same way as metal wood.

Stand accesory + sponge S7080

Dry cleaning system + Metal wool CL6760

Dry cleaning + sand CL6780

Stand

Cleaning of Tips

SOLDERINg AND dESOLdERINg STATIONSSOLDERINg AND dESOLdERINg STATIONS

10





STANDS AND TOOLS

system/PARt NO fOR hANdPiece iNcludes

AD-SA• T210-A• T245-A

• Dry cleaning module with metal wool• 3 cartridges extractor magazine for C210 or C245• Quick cartridges change• Sleep mode

PA-SA • For PA-A micro hot tweezers • Sponge stand • Sleep mode

DR-SA • For DR-A desoldering iron • Brush and sponge stand• Sleep mode

AP-SA • For AP-A solder feed iron • Sponge stand • Sleep mode

HT-SA • For HT-A hot tweezers • Sponge stand• Sleep mode

AD-SA • For AP-A solder feed iron • Sponge stand • Sleep mode

HT-SA • For HT-A hot tweezers • Sponge stand• Sleep mode

DS-SA • For DS-A micro desoldering iron • Brush and sponge stand• Sleep mode

tOOls system/PARt NO descRiPtiiON

NANOThe smallest soldering tools available in the market

• NP-A • Uses cartridges C105• Perfect for soldering and desoldering very smal-sized chip components.

• NT-A • Uses cartridges C105• For high-precision soldering jobs

Handpiece • T-210-A• For precision applications• Used with C210 cartridges• Offers quick cartridge change

T245HandpieceFor general soldering jobs in elec-tronics

• T-245 • Offers quick cartridge change

• T245-FA • A screw in this handpiece allows fixation of cartridges, ideal for high-intensity jobs that do NOT require frequent change of cartriges.

T245Comfort handpiecesSame characteristics as T245.Neoprene grip, thermally isolating and giving more comfort to the user. Ideal for intensive soldering.

• T245-CA • Quick cartridge change

• T245-TA • Handpiece incorporates a screw that allows to fix the cartridges• Ideal for high intensity jobs where NO cartridge change is needed

• T245-SA • A screw in this handpiece helps to securely fix the cartridge, ideal for extensive soldering jobs that do NOT require frequent cartridge changes. Supplied with a cable of 3 m lenght.

11




TOOLS AND CARTRIdgES

tOOls system/PARt NO descRiPtiON

Microtweezers

• PA-A • Designed for soldering and desoldering SMD micro components• Each cartridge is individually controlled by the control unit, guaranteeing fast heating-up, accuracy and recovery of temperature• The available range of cartridge is made for desoldering a wide range of components.• Connected to JBc stations, DI, DD, DM, AM and single line AP.• Supplied without cartridges.

Tweezers• HT-A • Specially for soldering and desoldering small and medium-sized SMD components. A cable strip cartridge is also available.

• Each cartrdge is individually controlled by the control unit, guaranteeing fast heating-up, accuracy and recovery of temperature.• Conntcted to JBC station DI, DD, DM AM and single line AP

Microdesoldering irons

• DS-A • Adapts to the ever-decreasing size of new components.• Very easy cleaning and maintenance. Tips are easily inserted by gentle pushing• Contacted to JBC stations DS-2A, DV-2A, DI, DD, DM, AM and single line AP• Supplied with tip C360-004

Desoldering iron• DR • Very easy cleaning and maintenance

• Two different types of solder residue chambers are available: metal and glass• Tips are easily palced by thread• Supplied with tip C560-003

Soldering wire feeding iron• AP-A • Offers a "third hand" by feeding soldering wire from diamters 0.8 to 1 mm. Specifically helpful for high-volume soldering jobs,

and whenever an extra hand is needed.• Connected to JBC stations DI, DD, DM, AM and single line AP• Supplied wiht cartrigde C130-403

Solder reels• SN5450 • Solder reels for AP-A

• The soldering irons are fitted with lead free solder reel - 99% Sn/0.3% Ag/0.7 Cu - with 50g solder.

Cartridges

12





CARTRIDgES

wORK ENvIRONmENT

14





The world technical leader in air pollution systems

Filtronic's business concept is to develop and manufacture mobile filter systems by creating

a better workbench environment and protect individuals and products from hazardous gases

and particles.

FILTER SySTEm

High Airflow Systems

Extract Arm Concept

CBC-Clean Bench Concept

High Vacuum Systems

15




system descRiPtiON

mAx suctiON cAPAcity m3/h

blOweR cAPAsity m3/h

sOuNd level db(A), At 1 m.

micROfileR sePARAtiON degRee dOP%

gAs filteR-chemi-sORbtiON-sePARAtiON degRee %

POweRsize(whd) weight

RemOte cONtROl

PARt NO

vOltAge PRe filteR

mg 75

High efficiency fume extraction with a wide range of filters depending on applications. It meets the demands for work in cleanroom. The MG75 is a filter unit with connection for one extraction arm. Remote control for variable speed, filter lifetime indication and alarm functions.

75 100 38-49 >99.97 >95

100

465mm640mm220mm

15 kg

Yes

750-1000-ESD750-1010-ESD

100/-250V Accessory

mg 95

High efficiency fume extraction with a wide range of filters depending on applications. It meets the demands for work in cleanroom. The MG95 is a filter unit with connection for one or two extraction arms. Remote control for variable speed, filter lifetime indication and alarm functions.

100 140 38-50 >99.97 >95

100465mm640mm220mm

18 kg

Yes

950-1000-ESD950-1010-ESD

100/-250V Accessory

mg 100

Fume extraction system with high efficiency filter. Connection for one or two arms. The system can be set in variable speed and has an alarm function for filter lifetime indication.

100 140 <52 >99.97 >95

100W460mm640mm210mm

15 kg

No100-1000-ESD100-1032-ESD100-1055-ESD100/-

250V Accessory

mg 200

High efficiency fume extraction system with integrated pre filter and a combined particle and gas filter. Wide range of filters depending on application. Meets the demands for work in cleanroom. Remote control for filter lifetime indication, variable speed and alarm functions.

200 310 <55 >99.95 >95

300W400mm1016mm402mm

43 kg

Yes

200-1000-ESD

115/-230V Yes

mg 400

High efficiency fume extraction system with integrated pre filter and a combined particle and gas filter. Wide range of filters depending on application. Meets the demands for work in cleanroom. Remote control for filter lifetime indication, variable speed and alarm functions.

400 450 >55 99.97 >95

300W796mm1016mm402mm

68 kg

Yes

450-1000-ESD

115/-230V Yes

FILTER SySTEm

system descRiPtiON techNicAl dAtA PARt NO

Pre-filter• A pre-filter for the high airflow systems MG 75, 95 and 100. • The pre filter is mounted on the filter system. • The filter media is of a “bag” type model with a high separation degree.

Pre filter bag active area 25 dm²Pre filter bag Class F8

PF-1200

Trolley• Trolley for MG75 and MG95. An easy solution to get the filter system even more mobile.

Arm brackets for the extraction arm is included 450 x 450 x 750 mm (WxDxH)) 950-3202-EDS

Bench mounting set • Bench mounting set for MG100. To be mounted on the edge of the workbench. 780-3001-ESD

Remote control • Remote control to MG units . 700-3057

Connection hose• Connection hose with quick-connection, aluminium covered

Available from 1-5 meter length. ø 65 mm (diameter) On request

Accessories

BY

RÅ

N I

TRA

NÅ

S 2

010

DENMARK

OEM AUTOMATIC KLITSØ A/S

Engholm Parkvej 4

DK- 3450 Allerød

Phone: +45 70 10 64 00

Fax: +45 70 10 64 10

[email protected]

www.oemklitso.dk

SwEDEN

OEM Electronics AB

P O Box 1025 (Norrabyvägen 6B)

SE-573 29 Tranås

Phone: +46 75 242 45 00

Fax: +46 75 242 45 09

[email protected]

www.oemelectronics.se

NORwAY

OEM Electronics AB

P O Box 1025 (Norrabyvägen 6B)

SE-573 29 Tranås Sverige

Phone: +46 75 242 45 00

Fax: +46 75 242 45 09

[email protected]

www.oemelectronics.se

FINLAND

OEM Electronics OY

Fiskarsinkatu 3

FI-20750 Turku

Phone: +358 207 499 300

Fax: +358 207 499 496

[email protected]

www.oemelectronics.fi

POLAND

OEM Electronics PL

ul. Postepu 2

PL-02-676 WARSZAWA

Phone: +48 22 863 27 22

Fax: +48 22 863 27 24

[email protected]

www.oemelectronics.pl

THE BALTICS

OEM Eesti OÜ

Kanali tee 1-328

EE-10112 Tallinn

Phone: +372 6550 871

Fax +372 6550 873

[email protected]

www.oem.ee

Documents

OEM Automatic Klitsø - Electronics Produktionshjælpemidler