Upload
others
View
15
Download
0
Embed Size (px)
Citation preview
Επιλογή υαλοπινάκων σε κτίρια, που καλύπτουν απαιτήσεις
Θερµοµόνωσης Ασφάλειας και Προστασίας
Γιώργος Ηλιάδης
Δρ. Μηχανολόγος Μηχανικός
Dr George Iliadis
Δομή της Παρουσίασης
Θερµοµόνωση Εισαγωγή στις απαιτήσεις επίδοσης από τα διαφανή τµηµατα όψεων (ΚΕΝΑΚ) Τυπικές λύσεις υαλοπινάκων, διπλών-τριπλών υαλώσεων. Ο ρόλος των επιστρώσεων-διακένων-αερίων πλήρωσης, ΕΝ10077
Ασφάλεια-Προστασία Πολυστρωµατικοί υαλοπίνακες (laminated) ΕΝ14449 Υαλοπίνακες µε επιπρόσθετη θερµική κατεργασία, (tempered) ΕΝ12150 Ασφάλεια έναντι πτώσης, ΕΝ12600 Ασφάλεια έναντι εξωτερικών επιβουλών, ΕΝ356, ΕΝ1063
Παθητική Πυροσπροστασία Δοµική πυροπροστασία ΕΝ13501
Πιστοποιήσεις Διαδικασία πιστοποίησης-αποδοχής σύµφωνα µε CPR 305/201, CE marking, δήλωση επίδοσης. Οδηγός αποδοχής κατά την παραλαβή έργου.
Dr George Iliadis
Θερμομόνωση
Dr George Iliadis
Θερμομόνωση
Dr George Iliadis
Θερμομόνωση
Dr George Iliadis
Θερμομόνωση
Dr George Iliadis
Θερμομόνωση
• Αγωγή • Συναγωγή • Ακτινοβολία
Dr George Iliadis
Θερμομόνωση
Dr George Iliadis
1°C -‐10°C 20°C
Ug = 5,8 W/m2K
Θερμομόνωση
Dr George Iliadis
11°C -‐10°C 20°C
Ug = 2,8 W/m2K
Θερμομόνωση
Dr George Iliadis
17°C -‐10°C 20°C
Ug = 1,4 W/m2K Ug = 1,1 W/m2K
Με αργό
Θερμομόνωση
Dr George Iliadis
Επιστρώσεις χαμηλής Εκπομπής (Low-‐E)
Θερμομόνωση
Dr George Iliadis
Διπλή Υάλωση ΧΩΡΙΣ
θερµοµόνωση, ΧΩΡΙΣ Low-E
Διπλή Υάλωση ΜΕ
θερµοµόνωση, ΜΕ Low-E
Θερμομόνωση
Dr George Iliadis
Θερμομόνωση
Dr George Iliadis
Θερμομόνωση
Dr George Iliadis
Φως
Ανακλαστικότητα Φωτός
Ενέργεια
Ανακλαστικότητα Ενέργειας
Συνολική περατότητα ηλιακής ακτινοβολούμενης
ενέργειας
g
Περατότητα φωτός
LT
Θερμομόνωση
Dr George Iliadis
Solar Heating Solar heating reduced by the
glazing
LIGHT
Θερμομόνωση
Dr George Iliadis
LIGHT
Θερμομόνωση
Dr George Iliadis
Θερμομόνωση
Dr George Iliadis
Window SoWware (LBNL)
Θερμομόνωση
Dr George Iliadis
Op\cs SoWware (LBNL)
Θερμομόνωση
Dr George Iliadis
Θερμομόνωση
Dr George Iliadis
Θερμομόνωση
Dr George Iliadis
Θερμομόνωση
Dr George Iliadis
Θερμομόνωση
Dr George Iliadis
Ανάγκη για έλεγχο ακτινοβολίας
Χρήση υαλοπινάκων με αυξημένη απορρόφηση ενέργειας
Κίνδυνος Θραύσης από Θερμικές Τάσεις
Αυξημένες Θερμικές Τάσεις
Θερμομόνωση
Dr George Iliadis
! Ποσοστό απορρόφησης ενέργειας του υαλοπίνακα ! Κλιματολογικές Συνθήκες ! Κατάσταση των ακμών των υαλοπινάκων ! Μέγεθος και πάχος υαλοπίνακα ! Υλικό επικάλυψης ακμών ! Τρόπος τοποθέτησης / Πλαίσιο ! Εξωτερική σκίαση ! Εσωτερική σκίαση ! Εσωτερικές θερμαντικές ή κλιματιστικές διατάξεις ! Μόνιμες κατασκευές πίσω απο τον υαλοπίνακα ! Τύπος υάλωσης
Θερμομόνωση
Dr George Iliadis
Βασική Θερμοκρασιακή Διαφορά
Τύπος Σκίασης / Παράγοντας Σκίασης
Τύπος Πλαισίου / Παράγοντας Πλαισίου
Σύστημα σκίασης /Περσίδες
Μέγιστη Θερμοκρασιακή Διαφορά
Μόνιμες κατασκευές πίσω
απο τον υαλοπίνακα
Θερμομόνωση
Dr George Iliadis
Περιμετρική Επιφάνεια της Υάλωσης (όσο μεγαλύτερη τόσο χειρότερα)
Ασφαλής Θερμοκρασιακή Διαφορά 40C
Μέγιστη Θερμοκρασιακή Διαφορά Διορθωμένη Ασφαλής Θερμοκρασιακή Διαφορά
<
Θερμομόνωση
Dr George Iliadis
Θερμομόνωση
Dr George Iliadis
Project: Star City Cinemas, Athens , Greece Year:2007 Products: Frameless Glass facade Architect: Diarchon SA
Project: Onassis Foundation Cultural Center, Athens , Greece Year:2009 Products: Frameless Safety Glass, Fire Protection Doors, Entrance doors Architect: Architecture Studio, France
Παρεμβάσεις στο Κέλυφος Μεγάλης Κλίμακας facade
Project: Taichung Cultural Center Competition Year: 2013 Products: Stainless steel framed facade Architect: Sakellaridou, Batzios, et al
Ασφάλεια-‐Προστασία
Dr George Iliadis
Ασφάλεια-‐Προστασία EN12600
Dr George Iliadis
Ασφάλεια-‐Προστασία EN12600
Dr George Iliadis
Ασφάλεια-‐Προστασία EN12600
Dr George Iliadis
Ασφάλεια-‐Προστασία EN12600
Dr George Iliadis
ca 50 kg
hmin
ca 876 x 1938 mm
4 PROVINI
Ασφάλεια-‐Προστασία EN356-‐A
Dr George Iliadis
Ασφάλεια-‐Προστασία EN356-‐B
Dr George Iliadis
Ασφάλεια-‐Προστασία EN356
Dr George Iliadis
Ασφάλεια-‐Προστασία EN1627
Dr George Iliadis
Ασφάλεια-‐Προστασία EN1627
Dr George Iliadis
Project:Belgian Embassy, Athens , Greece Year:2012 Products: Thermfix Vario Stainless steel, FB4Unico Steel, FB4 Architect: MVS & Associates www.mvs-associates.com
Ασφάλεια-‐Προστασία EN1063
Dr George Iliadis
Ασφάλεια-‐Προστασία EN1063
Dr George Iliadis
Ασφάλεια-‐Προστασία Θερμικά σκληρυμένος Υαλοπίνακας (Tempered Glass) EN12150
Dr George Iliadis
Ασφάλεια-‐Προστασία Στρωματοποιημένος Υαλοπίνακας (laminated glass) EN14449
Dr George Iliadis
Παθητική Πυροπροστασία EN13501-‐2
Dr George Iliadis
Παθητική Πυροπροστασία
Dr George Iliadis
E, Ακεραιότητα έναντι φωτιάς, Integrity
EI, Μόνωση & Ακεραιότητα έναντι φωτιάς, Integrity & Insulaqon
EW, Ακεραιότητα έναντι φωτιάς και μειωμένη περατότητα με ακτινοβολία Integrity & Radia\on
Παθητική Πυροπροστασία
Dr George Iliadis
Παθητική Πυροπροστασία EI
Dr George Iliadis
Παθητική Πυροπροστασία
Dr George Iliadis
Παθητική Πυροπροστασία
Dr George Iliadis
Παθητική Πυροπροστασία
Dr George Iliadis
Εφαρμογή
Εμπορικό Κτίριο Κατοικία Διακόσμηση/άλλο
Χρήση
Περιοχή
Αισθητική
Διαστάσεις
Περιοχή
Αισθητική
Διαστάσεις
Χρήση
Διαστάσεις
Τοποθέτηση
Αλλες απαιτήσεις
Τοποθέτηση
Αλλες απαιτήσεις
Εφαρµογή
Εμπορικό Κτίριο Χρήση
Περιοχή
Αισθητική
Διαστάσεις
Τοποθέτηση
Αλλες απαιτήσεις
Γραφεία Εµπορικό Βιοµηχ. Χώρος Αεροδρόµιο
Προσανατολισµός Εντος η εκτος Πόλης Υψόµετρο
Χρωµατισµός Ανακλαστικότητα
Πλάτος Υψος
Ειδος Πλαισίου Κατακόρυφα/Οριζόντια
Πυροπροστασία Ασφάλεια Ηχοµείωση
Αθλητικές Εγκ. Ξενοδοχείο
Ειδικές απαιτήσεις, Εμπειρία, Ομοιες κατασκευές, Πρώτη κατευθυνση
Απαιτήσεις Θερμομόνωσης, Επιτρεπτές ανακλαστικότητες,
Απαιτήσεις Ανεμοπίεσης
Εγκριση επιλογών
Υπολογισμός πάχους
Είδος επεξεργασίας Οριστικοποίηση Μεγεθών
Αν υπάρχουν ρυθμίζουμε, αν όχι προτείνουμε
Πιστοποιήσεις
Σήμανση CE (CE marking)
• Αρχικές δοκιμές τύπου (ITT) – Δήλωση Επίδοσης
• Σύστημα Ελέγχου παραγωγής (FPC) – Πιστοποιημένο ή όχι, ανάλογα με το σύστημα (System 1,2,3,4)
Dr George Iliadis
Πιστοποιήσεις
Dr George Iliadis
Πιστοποιήσεις
Dr George Iliadis
EN 356 Glass in building - Security glazing - Testing and classification of resistance against manual attack EN 410 Glass in building - Determination of luminous and solar characteristics of glazing EN 572-1 Glass in building - Basic soda lime silicate glass products - Part 1: Definition and general physical and mechanical properties EN 572-2 Glass in building - Basic soda lime silicate glass products - Part 2: - Float glass EN 572-4 Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass EN 572-5 Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass EN 673 Glass in building - Determination of thermal transmittance (U value) - Calculation method EN 1063 Glass in building - Security glazing - Testing and classification of resistance against bullet attack EN 1096-1 Glass in building - Coated glass - Part 1: Definitions and classification EN 1096-2 Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings EN 1096-3 Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings EN 12150-1:2000 Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
Πιστοποιήσεις
• EN 12600 Glass in building - Pendulum test - Impact test method and classification for flat glass • EN 12758 Glass in building - Glazing and airborne sound insulation – Product descriptions and
determination of properties • EN 12898 Glass in building - Determination of the emissivity • prEN 13474 Glass in building - Design of glass panes • EN 13501-1 Fire classification of construction products and building elements - Part 1: Classification
using test data from reaction to fire tests • EN 13501-2 Fire classification of construction products and building elements -Part 2: Classification
using data from fire resistance tests, excluding ventilation services • EN 13501-5 Fire classification of construction products and building elements - Part 5: Classification
using data from fire exposure roof tests • EN 13541 Glass in building - Security glazing - Testing and classification of resistance against explosion
pressure • EN 14449 Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/
Product standard • EN 14178-1, Glass in building – Basic alkaline earth silicate glass products - Part 1: Float glass
Dr George Iliadis
Πιστοποιήσεις
• prEN 14179-1, Glass in building - Heat soaked thermally toughened soda lime silicate safety glass –Part 1: Definition and description
• prEN 14321-1, Glass in building – Thermally toughened alkaline earth silicate safety glass - Part 1:Definition and description
• EN ISO 12543-1:1998, Glass in building – Laminated glass and laminated safety glass - Part 1:Definitions and description of component parts (ISO 12543-1:1998)
• EN ISO 12543-2:1998, Glass in building – Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:1998)
• EN ISO 12543-3:1998, Glass in building – Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:1998)
• EN ISO 12543-4:1998, Glass in building – Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:1998)
• EN ISO 12543-5:1998, Glass in building – Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:1998)
• EN ISO 12543-6:1998, Glass in building – Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:1998)
Dr George Iliadis
Πιστοποιήσεις
Glass for Europe Guide to the Construction Products Regulation
Annex I – Date of CE marking and publication of standards No. of
Standard Product Start Date
CE Marking* Date of Publication** EN 572-91 Basic soda lime silicate glass 06 EN 572-9:2004 EN 1036-2 Mirrors 10 EN 1036-2:2008 EN 1096-4 Coated glass 06 EN 1096:2004
EN 1279-5 Insulating glass units 07
EN 1279-5:2005 + A2:2010 The amendments do not affect
the declared characteristics.
EN 1863-2 Heat strengthened soda lime
silicate glass 06 EN 1863-2:2004
EN 12150-2 Thermally toughened soda lime
silicate safety glass 06 EN 12150-2:2004
EN 14179-2
Heat-soaked thermally-toughened soda lime silicate
safety glass 07 EN 14179-2:2005
EN 14449 Laminated glass and laminated
safety glass 07
EN 14449:2005 + AC:2005 There is nothing to explain as
the CE marking started after the corrigendum.
EN 1748-1-2 Borosilicate glass 06 EN 1748-1-2:2004 EN 1748-2-2 Glass ceramics 06 EN1748-2-2:2004
EN 12337-2 Chemically strengthened soda
lime glass 06 EN 12337-2:2004
EN 13024-2 Thermally toughened
borosilicate safety glass 06 EN 13024-2:2004 EN 14178-2 Basic alkaline earth silicate glass 06 EN 14178-2:2004
EN 14321-2 Thermally toughened alkaline
earth silicate safety glass 07 EN 14321-2:2005 EN 1051-2 Glass blocks and pavers 10 EN 1051-2:2007
* For CE marking on sticker or invoice only.
Note that the dates mentioned in this table are the dates from which CE marking was mandatory
(date of withdrawal of the possible national standard on the same subject). CE marking was already
possible one year before (date of co-existence of this possible national standard with the new EN
standard). Therefore, some companies may have started the CE marking of their product the year
before that indicated in the table, and so can indicate that year on their CE marking label.
**For DoP only.
1 : EN 572-9 covers the following soda lime silicate glass products: float glass, polished wired glass, drawn sheet glass, patterned glass, wired patterned glass, wired and unwired channel shaped glass.
Dr George Iliadis
Πιστοποιήσεις Δήλωση Επίδοσης Declara\on of Performance (DoP)
Dr George Iliadis Glass for Europe Guide to the Construction Products Regulation
Annex II – Glass industry model for a declaration for one product only DECLARATION OF PERFORMANCE
ABC123 Laminated glass intended to be used in buildings and construction work
AnyCo Ltd, PO Box 21
B-1050 Brussels EN 14449: 2005
Bullet resistance: Notified production control certification body No. 0749 Essential characteristics AVCP systems Performance Safety in the case of fire
Resistance to fire 1 NPD Reaction to fire 3, 4 NPD External fire performance 3, 4 NPD
Safety in use Bullet resistance 1 BR1S Explosion resistance 1 NPD Burglar resistance 3 NPD Pendulum body impact resistance 3 1B1 Resistance against sudden temperature changes and temperature differentials (K) 4 40K
Wind, snow, permanent and imposed load resistance 4 NPD Protection against noise
Direct airborne sound reduction (dB) 3 NPD Thermal properties
Declared emissivity U-value (W/m²K) 3
0,89 5,2 W/m²K
Radiation properties Light transmission Light reflection 3
0,83 0,08/0,08
Solar energy characteristics Solar transmission Solar reflection Solar factor
3 0,59
0,06/0,06 NPD
Durability 3 PASS The performance of the product identified is in conformity with the declared performance above. This declaration of performance is issued under the sole responsibility of the manufacturer. Signed for and on behalf of the manufacturer by:
Name and function Place and date of issue Signature
Πιστοποιήσεις
Dr George Iliadis
Declaration of performance (Article 4)
1. When a construction product is covered by a harmonised standard or conforms to a European Technical Assessment which has been issued for it, the manufacturer shall draw up a declaration of performance when such a product is placed on the market.
• The declaration of conformity has been replaced by the DoP. The DoP is required for CE marking purposes.
Πιστοποιήσεις
Dr George Iliadis
Declaration of performance (Article 4)
2. When a construction product is covered by a harmonised standard or conforms to a European Technical Assessment which has been issued for it, information in any form about its performance in relation to the essential characteristics, as defined in the applicable harmonised technical specification, may be provided only if included and specified in the declaration of performance except where, in accordance with Article 5, no declaration of performance has been drawn up.
• The DoP sets down the information that has to be declared for CE marking on the basis of the hEN.
Πιστοποιήσεις
Dr George Iliadis
Declaration of performance (Article 4)
3. By drawing up the declaration of performance, the manufacturer shall assume responsibility for the conformity of the construction product with such declared performance. In the absence of objective indications to the contrary, Member States shall presume the declaration of performance drawn up by the manufacturer to be accurate and reliable.
• Unlike the old declaration of conformity, which guaranteed conformity and, indirectly, durability of products, the DoP only provides product performances. Manufacturers are responsible for ensuring the accuracy of the declared performances and the continuing durability of the product according to the relevant hEN.
Πιστοποιήσεις
Dr George Iliadis
Πιστοποιήσεις
Dr George Iliadis
Πιστοποιήσεις
Dr George Iliadis
Πιστοποιήσεις
Dr George Iliadis
Ευχαριστώ για την προσοχή σας
Dr George Iliadis