EU Declaration of Conformity According to European Low Voltage Directive 2014/35/EU, European Directive for Electromagnetic Compatibility 2014/30/EU and European RoHS directive 2011/65/EU

For the following equipment Product: Transfer Switch Type Designation/Trademark: A2.DTL…(see attchment for model name rule)/EMERSON,ASCO Manufacturer’s Name: Emerson Network Power Co. Ltd Manufacturer’s Address: 1-4F, 6-10F, Block B2, Nanshan I Park, No.1001 Xueyuan Road, Nanshan District, Shenzhen, Guangdong, China

Zip Code 518055 is herewith confirmed to comply with the requirements set out in Directive 2014/35/EU, Directive 2014/30/EU, and Directive 2011/65/EU. Compliance with 2014/35/EU and 2014/30/EU are evaluated by applying the following standards: Safety standard: EN 60947-6-1:2005 EN 60947-6-1:2005/A1:2014

EMC standard: EN 60947-6-1:2005 EN 60947-6-1:2005/A1:2014 Responsible for making this declaration is the manufacturer. Person responsible for making this declaration Name, Surname: Weiguo Zeng Position/Title: Senior Director, R&D/Engineering Signature: Date: 2016-07-22

Annex Information Product: Transfer Switch Type Designation/Trademark: A2.DTL…(see attchment for model name rule)/EMERSON,ASCO LVD Compliance test report Issued by: SHANGHAI TESTING&INSPECTION INSTITUTE FOR ELECTRICAL EQUIPMENT

Report number: AT16-0963

Dated: 2016-07-20 EMC Compliance test report Issued by: SHANGHAI TESTING&INSPECTION INSTITUTE FOR ELECTRICAL EQUIPMENT

Report number: AT16-0963

Dated: 2016-07-20 EMI limit Value: Class A Power Port Type: AC

 

 

 

 

 

 

Attachment

Model name rule Description A2xDTLyzuvw0, a (x,y,z,u,v,w and a are variables) 1 234567 8

Model Description

1

x Series 230 automatic

transfer switch

A2ADTL Series 230 automatic control transfer switch

center-off(three-position), 80A frame

Series 230 remote

transfer switch

A2RDTL Series 230 remote control transfer switch center-off

(three-position), 80A frame

Series 230 Manual

transfer switch

A2MDTL Series 230 manual transfer switch center-off

(three-position), 80A frame

2 y number of poles,

configuration

B1 2-pole (with neutral line)

B3 4-pole (with netural line)

3

z

rated current

0016 16A

0020 20A

0025 25A

0032 32A

0040 40A

0050 50A

0063 63A

0080 80 A

4

u

rated voltage

D 220V(2P)

E 230V(2P)

F 240V(2P)

H 380V(4P)

J 400V(4P)

K 415V(4P)

5

v

controller

A built in C200standard controller （ 220Vac~415Vac for

2-sourcefor RTS models）

B built in C300 standard controller（for ATS models.）

6

w

Accessory

0 No accessory

X with accessory, refer to remark below and accessory

information for detail

7 0 Enclosure 0 No enclosure

Code for auxiliary contactor

132 b c

(b and c are variables)

Code for auxiliary contact

No. variable explanation code remark

9 --- Auxiliary contact 132

10 b function A Has 1 auxiliary contact LAP1F100, but on position only when

the transfer switch at alternative supply postion

B Has 1 auxiliary contact LAP1F100, but on position only when

the transfer switch at normal supply postion

C Has 2 auxiliary contact LAP1F010, these two auxiliary contact

switch in series, but all on positions only when the transfer

switch at off position

D Has 1 auxiliary contact LAP1F010, but off position only when

the transfer switch at normal supply postion

E Has 1 auxiliary contact LAP1F010, but off position only when

the transfer switch at alternative supply postion

F Has 2 auxiliary contact LAP1F100, these two auxiliary contact

switch in parallel, but all off positions only when the transfer

switch at off position

11 c Number of auxiliary

contact

Blank 1

A 2

B 3

C 4

 

 

Model Description(cont.)

8

a

Accessory information

43HC RTS, control circuit voltage 220Vac~240Vac （single source）

43HG RTS control circuit volatge24Vdc

72D with commnunication function

97C CCC marked

97N CE marked

remark： Refer to the part of code for auxiliary contactor