20
ODOT SPECIFICATION UPDATE Ohio Concrete Fall Meeting 2020, November 19, 2020

ODOT SPECIFICATION UPDATE · 2020. 11. 19. · oFollowed ACI 237R Guidance. 8 | CMS ITEM 499 UPDATES Ohio Concrete Fall Webinar Series oMixes granted based on Slump Flow Class oFor

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

  • ODOT SPECIFICATION UPDATE

    • Ohio Concrete Fall Meeting 2020, November 19, 2020

  • 2 |

    ODOT SPECIFICATION UPDATE

    Dan Miller, PE

    Ohio Concrete Fall Webinar Series

  • 3 |

    INTRODUCTION

    o CMS Item 451-452

    o CMS Item 455

    o CMS Item 499/Supplement 1126

    o 499.05.D Volumetric Trucks

    o 705.29 Fibers in Concrete

    Ohio Concrete Fall Webinar Series

  • 4 |

    CMS ITEM 451-452 UPDATES

    o New Mix Designationo QC1P, Same parameters

    o Stone required to meet 703.13 (Freeze-thaw)

    o HIPERPAV Requiremento Removed from Specification

    o Still eligible for use in the field (QC Tool)

    o Dowel Basket Shipping Wireso Can remain in place

    o Assure firm placement and alignment

    Ohio Concrete Fall Webinar Series

  • 5 |

    CMS ITEM 451-452 UPDATES

    o Jointso Sawing Requirements Condensed

    Ohio Concrete Fall Webinar Series

  • 6 |

    CMS ITEM 455 REMINDERS

    o Requirements:o Project Specific QC Plan

    o AASHTO Accredited Laboratory

    o Keep in good standing

    o ACI Field and Strength Certified Staff

    o Deliver all cylinders timelyo QC to QC lab, one set of QA to ODOT Lab

    o Maintain good recordso Daily diaries, photographs, etc.

    Ohio Concrete Fall Webinar Series

  • 7 |

    CMS ITEM 499 UPDATES

    Ohio Concrete Fall Webinar Series

    oMix Design Updates for 2019oQC1P Pavement Mix Design

    oRequires 703.13 aggregates

    o 4500 psi, 2000 Coulombs or less

    oQCSCC Self-Consolidating Concrete

    oRequires Super Structure (SS) Aggregate

    o 4500 psi, 1500 Coulombs or less

    oNot required to be Well Graded

    o Addition of Slump Flow Table for SCC Concrete

    o Followed ACI 237R Guidance

  • 8 |

    CMS ITEM 499 UPDATES

    Ohio Concrete Fall Webinar Series

    oMixes granted based on Slump Flow Class

    oFor use with decorative applications

    oHeavy reinforcement congestion

    oCurrently being used in other areas

    oPrecast/Prestress/Pipe

  • 9 |

    SUPPLEMENT 1126 AND SCC

    Ohio Concrete Fall Webinar Series

    oSupplement 1126 and SCC

  • 10 |

    SUPPLEMENT 1126 AND SCC

    Ohio Concrete Fall Webinar Series

    Source: RMCA of Ontario

    ASTM C1621 J-Ring TestASTM C1611Slump Flow

    ASTM C1712 Penetration

    Source: Humboldt Mfg. Co.

    ASTM C1610 Static

    Segregation Column

    So

    urc

    e: H

    um

    bo

    ldt

    Mfg

    . C

    o.

  • 11 |

    CMS ITEM 499 UPDATES

    Ohio Concrete Fall Webinar Series

    o499.04 Requirements/Reminders

    oDo not exceed the w/cm or w/p ratio at any time

    o Adjust aggregates as needed

    o 100 Pound Change (no approval needed)

    o >100 Pound Change (MUST notify Engineer)

    o Provide updated COMPASS report

    o Addition of Non-chloride Accelerator

    o Requires Engineer approval prior to use

    o Additions on site

    o Assure truck remains in time (90 minutes)

    o Do not exceed w/cm or w/p ratio

  • 12 |

    CMS ITEM 499 UPDATES

    Ohio Concrete Fall Webinar Series

    o499.04 Requirements/Reminders (Cont.)

    o 499.04.H

    o Additions on site (499.08)

    o Assure truck remains in time (90 minutes)

    o Do not exceed w/cm or w/p ratio

    o R.O.T. is 2 attempts to adjust air

    o If can’t bring in spec, reject the truck

  • 13 |

    VOLUMETRIC TRUCKS

    Ohio Concrete Fall Webinar Series

  • 14 |

    VOLUMETRIC TRUCKS

    Ohio Concrete Fall Webinar Series

    oVolumetric Trucks and ODOT

    oWhere to use?

    oCurrently used on Latex Modified Concrete

    o SS847 and SS848 applications

    o Item 613 Low Strength Mortar Backfill

    oManhole and monument adjustments

    oQCMISC applications

    oQCMS/FS high early patching situations

  • 15 |

    VOLUMETRIC TRUCKS

    Ohio Concrete Fall Webinar Series

    o499.05.D

    oMixers conform to ASTM C 685

    o Sections 7, 8, 9, 10, 11, 13

    o Documentation needed:

    o Process control plan

    o Product Quality Control Plan

    oMaterial handling, storage, etc.

  • 16 |

    VOLUMETRIC TRUCKS

    Ohio Concrete Fall Webinar Series

    o499.05.D (Calibration)

    oWhen will the truck be required to be calibrated?

    o Possibly per project depending on materials

    oWill moisture adjustments be required

    oRequirement will be similar to 499.06

    oWill it be tagged like a ready-mix truck or a plant?

    o Each truck must have a tag

  • 17 |

    VOLUMETRIC TRUCKS

    Ohio Concrete Fall Webinar Series

    oTable 499.06-2 (Batching Tolerances)

    oWhen will the truck be required to be calibrated?

    o Possibly per project depending on materials

    oWill moisture adjustments be required

  • 18 |

    705.29 SYNTHETIC FIBERS FOR CONCRETE

    o Added 7/17/2020o Follows Illinois Tollway, ILDOT, INDOT

    Ohio Concrete Fall Webinar Series

  • 19 |

    705.29 SYNTHETIC FIBERS FOR CONCRETE

    o Added 7/17/2020 (Cont.’d)o QPL Website

    o http://www.dot.state.oh.us/Divisions/ConstructionMgt/Materials/Pages/QPL.aspx

    o Title Contains Guidance on Submittal

    Ohio Concrete Fall Webinar Series

    http://www.dot.state.oh.us/Divisions/ConstructionMgt/Materials/Pages/QPL.aspx

  • 20 |

    ?

    QUESTIONS

    Ohio Concrete Fall Webinar Series

    Dan Miller, MSCE, PE

    [email protected]

    614-275-1325

    mailto:[email protected]