RESUME

PEDRO ANTONIO FRANCO AROCHA Nueva Esparta, Venezuela, Jorge Coll, Los Roques Building, 1-F.

Mobiles: +0058 (414) 239-32.91, +0058 (426) 883-56.79

E-Mail: pfrancoarocha@gmail.com

OBJECTIVE

To obtain a job with a reputable engineering and/or designing group, where my skills, knowledge

and experience can be used to the benefit of my employer.

EDUCATION AND RELEVANT TRAINING COURSES AND ACTIVITIES:

Orient University (1990-1996), Puerto La Cruz, Venezuela (Record 7.3/10)

- Electrical Engineer, Power Mention, 1996, CIV No. 107.099

- Electrical Raceways and Wiring, 32 hours, Inelectra, Sep 2003

- Luxicom Design with Luxicom Software, Cooper Connection Venezuela, Sep 2003.

- Cathodic Protection, 40 hours, Codelectra, May 2003.

- Electrical Cable and Load lists, 24 hours, Inelectra, May 2002.

- Microstation 2D Basic level, 24 hours, Inelectra, Feb 2002.

- Integrated System of Managing Material, Sisma CAD, 32 hours, Inelectra, Dec 2001

- Low and Medium Voltage Protection, 32 hours, Inelectra, Nov 2001.

- Fire & Gas Detection Systems, 24 hours, Inelectra, Sep 2001.

LANGUAGES: Spanish, English (good writing and reading, speaking average)

SUMMARY OF EXPERIENCE:

Design Engineer of basic and detail engineering for industrial plants, residential and commercial

buildings, health care buildings and oil facilities plants. Design of underground and aboveground

raceways and wiring of medium and low voltage systems, grounding systems, lighting systems,

receptacles systems, protection against atmospheric discharges and fire and gas detection systems.

Calculation and selection of electrical feeders. Knowledges of cathodic protection systems. Analysis

of electrical distribution systems using linear programming techniques and by means of studies of

flow of load and short-circuit. Substation, Transmission and Distribution overhead lines design.

Knowledges in protections coordination of medium and low voltage systems. Experience in

measurements of grounding resistance. Knowledges in calculation of industrial, commercial, hotel

and residential lighting systems. Elaboration of requisitions, material takeoff, management of work

items. Experience in the preparation of bids for the national and international industry. Knowledges

in electrical designs Standards: NEC, PDVSA, COVENIN, NFPA, IEEE, ANSI, IEC and CADAFE.

Calculation Software: Autocad, Microstation, Etap Powerstation, Luxicom, Visual Lighting and

Calculux.

RESUME

PEDRO ANTONIO FRANCO AROCHA Nueva Esparta, Venezuela, Jorge Coll, Los Roques Building, 1-F.

Mobiles: +0058 (414) 239-32.91, +0058 (426) 883-56.79

E-Mail: pfrancoarocha@gmail.com

PROFESSIONAL EXPERIENCE:

2007- NOWADAYS - FREELANCE ELECTRICAL DESIGNER ENGINNEER

Engineering Design of underground and aboveground wiring, medium and low voltage systems,

grounding systems, receptacles and lighting designs, protection against atmospheric discharges,

single line diagrams, panelboard diagrams, installation details, cable lists, location of power

equipment’s, load - short circuit – start up motor analysis study and fire detection systems.

Elaboration of descriptive memory, calculation reports, requisitions, material takeoff, equipment

specification (data sheets), scope of works and management of work items. Inter-discipline and

interference coordination review.

Projects:

1. Projects of medium and low voltage electrical systems for Residential, Commercial, Hotel

and Health Care Buildings (More than 50 different projects).

2. Dam built on Cuira river Project (TUY-IV), Basic Engineering. Hidrocapital-Inclam.

3. Strategic Storage System and Technological Complex Radio (SAE and COTER) Project.

Detail Engineering. Inclam-CEIEC.

4. Integrated Monitoring and Assistance System (SIMA) Project. Detail Engineering. Inclam-

CEIEC.

5. Gomby Food Factory Project. Detail Engineering. Punctum-Gomby.

6. Munchy Food Factory Project. Detail Engineering. Punctum-Munchy.

7. Galicia Sausage Factory pork butchery. Detail Engineering. Punctum-Galicia.

8. Jose First Fertilizer Project. Basic Engineering. Asincro C.A.-Fertinitro

9. Well Pad JC extension Project. Detail Engineering. Tecnocsult SACA-PDVSA

10. 34.5/13.8 kV rural type Substation El Manglillo. Basic & Detail Engineering. Corpoelec (*).

(*) The scope of work (in addition to all the Electricity design) includes recruitment and

coordination of field work such as: Soil Survey, Land Survey and soil resistivity

measurement. Also, coordination and review of the Civil design works necessary to complete

the engineering and preparation of the bid package which includes: EPC Project, cost

Estimates and Analysis Unit Price of each work item.

2005- 2007 – TECNOCONSULT S.A (ELECTRICAL DESIGNER ENGINNEER &

LEADER)

Engineering Design of hazardous area classification, underground and aboveground wiring, medium

and low voltage systems, grounding systems, receptacles and lighting designs, protection against

atmospheric discharges, single line diagrams, panelboard diagrams, installation details, cable lists,

location of power equipment’s, load - short circuit – start up motor analysis study. Elaboration of

descriptive memory, calculation reports, requisitions, material takeoff, equipment specification (data

sheets), scope of works and management of work items. Inter-discipline and interference

coordination review. QA/QC check.

Projects:

1. Gas Plant Expansion Project. Detail Engineering. Ameriven (13.8/4.16 kV "powerhouse

type" Substation).

RESUME

PEDRO ANTONIO FRANCO AROCHA Nueva Esparta, Venezuela, Jorge Coll, Los Roques Building, 1-F.

Mobiles: +0058 (414) 239-32.91, +0058 (426) 883-56.79

E-Mail: pfrancoarocha@gmail.com

2. Facilities for the release of methanol, MTBE and isooctane by Jose Petrochemical Dock.

Project. Detail Engineering. Supermetanol.

3. Cerro Azul Cement Project. Detail Engineering. PDVSA.

4. Adequacy of Gas Power in Production Project (AGFP). Basic Engineering. PDVSA.

5. M-830, Gas Gathering Project / ID Clusters Modification. Detail Engineering. Sincor.

6. Morichal Sports Facilities Project. Detail Engineering. PDVSA.

7. Cerro Azul Cement Pipeline Project. Detail Engineering. PDVSA.

8. Adequacy of Gas Power in Production Project (AGFP). Detail Engineering. PDVSA.

9. Projects: - Adequacy of Hospital Facilities dr. Dario Marquez, Caripito Monagas State. -

Headquarters Youth and Child Symphony Orchestra, Caripito Monagas State. – Design of

Ambulatory rural type II, Caripito, Monagas State. Detail Enginnering. PDVSA.

10. Gas Gathering Project, Detail Engineering. Sincor.

11. Support in the preparation of commercial offers for national and international industry.

1998- 2005 – INELECTRA S.A.CA (ELECTRICAL DESIGNER ENGINNER)

Engineering Design of hazardous area classification, underground and aboveground wiring, medium

and low voltage systems, grounding systems, receptacles and lighting designs, protection against

atmospheric discharges, single line diagrams, panelboard diagrams, installation details, cable lists,

location of power equipment’s, load - short circuit – start up motor analysis study. Elaboration of

descriptive memory, calculation reports, requisitions, material takeoff, equipment specification (data

sheets), scope of works and management of work items. Inter-discipline and interference

coordination review. QA/QC check.

Projects:

1. Sinovensa Project. Detail Engineering. Sinovensa.

2. Restoration Project. Detail Engineering. Petrozuata. (*).

(*) The scope of work (in addition to all the Electricity design) includes Field Engineering.

Solve of design deficiencies and constructive problems that need evaluation of technical-

economic alternatives Elaboration of field instructions to the contractors. Support to the

departments of Quality, Construction and Commissioning.

3. ENI-DACION Field Development Project, phase II. Detail Engineering. Eni-Lasmo

4. Modular Flow Station EFM-20 Project. Detail Engineering. Shell

5. Termozulia Generation Plant EPC Project. Detail Engineering. Enelgen

6. Adequacy of Electrical Distribution System for El Palito Refinery. Basic Engineering.

PDVSA

7. Short-term planning study of 38 distribution substation belonging to the network of C.A “La

Electricidad de Caracas”. Present and short-term diagnostic condition of the electrical system

operation under several stages or operating schemes, ensuring the continuity of electrical

service and its quality. Simulations of network operation by charge flow and short-circuit

studies using of Power System Simulation Computer Tool (PSS/U). Proposal of preliminary

projects for adaptation and improvement of networks in the short term based on technical-

economic evaluation of different alternatives developed.

8. Cerro Negro Upstream Production Facilities Upstream. Detail Engineering. PDVSA-Mobil-

Veba Oel. (115 kV Transmission Lines and 34.5 kV Distribution Lines Designs)

9. Project Planning Study short and medium term Electrical Distribution System of San

Salvador. CAESS.

RESUME

PEDRO ANTONIO FRANCO AROCHA Nueva Esparta, Venezuela, Jorge Coll, Los Roques Building, 1-F.

Mobiles: +0058 (414) 239-32.91, +0058 (426) 883-56.79

E-Mail: pfrancoarocha@gmail.com

10. Support in the preparation of commercial offers for national and international industry.

1997- 1998 – ASINCRO C.A. (ELECTRICAL DESIGNER ENGINNER)

Engineering Design of overhead distribution lines. Elaboration of descriptive memory, calculation

reports, requisitions, material takeoff, equipment specification (data sheets), scope of works and

management of work items. Inter-discipline and interference coordination review. QA/QC check.

Project:

1. Expansion of the electrical distribution system in Anaco district Project (ESDEDA). Basic

and Detail Engineering. PDVSA

1996-1997 –AAC-360 C.A. (FIELD ENGINEERING)

Project:

1. Corrosion evaluation of buried pipes Anaco-Pto. Ordaz Project (ASAPO), PDVSA. Direct

Current Voltage Gradient (DCVG) Operator of buried piping system Anaco-Pto Ordaz.

Evaluation of the existing cathodic protection system.

INCLAM, S.A. Limonero, 22 28020 MADRID Tel. 91 574 91 07 Fax 91 574 91 06 e-mail: inclam@inclam.com

Inscri

ta e

n e

l R

eg

istr

o M

erc

an

til d

e M

ad

rid,

tom

o 1

.100

, g

en

era

l 1

.04

8,

se

cció

n 3

ª d

el L

ibro

de

So

cie

da

de

s,

folio

18

, h

oja

70

.07

3,

Inscri

pció

n 1

ª.-

C.I

.F.:

A -

782

24

52

4

D. Alfonso Andrés Picazo, con DNI 51.697.391-S, como Presidente de INCLAM, S.A.

CERTIFICA

Que D. PEDRO ANTONIO FRANCO AROCHA, con Cédula de Identidad número

11.058.345 ha trabajado como Ingeniero Electricista en los siguientes trabajos

ejecutados por INCLAM, S.A.:

Objeto del servicio realizado Periodo de

participación

Ingeniería de detalle para la presa sobre el río Cuira. Estado Miranda. Ejecución de todo el diseño del sistema eléctrico para la presa sobre el río Cuira (TUY-IV). El alcance contempla: memoria descriptiva, canalizaciones, especificación de equipos, estudios de cargas, diagramas unifilares, diagramas de tablero, iluminación, cómputos métricos, etc. Coordinación multidisciplinaria. Caudal: 10 m3/s

22/03/2011 08/05/2012

Obras Civiles del Centro de Control Regional del sistema de monitoreo del Ministerio de Instituciones Penitenciarias en Tocuyo, Estado Lara. Ejecución de todo el diseño del sistema eléctrico en baja tensión para el edificio Centro Regional del MPPSP, en El Tocuyo, Edo. Lara. El alcance contempla: Redes aéreas en 13.8 kV, memoria descriptiva, canalizaciones en baja tensión, especificación de equipos, estudios de cargas, diagramas unifilares, diagramas de tablero, iluminación interior y exterior, tomacorrientes, cómputos métricos, etc. Coordinación multidisciplinaria.

16/11/2015 16/05/2016

Obras Civiles para el Centro Regional de San Cristóbal, Tachira. Ejecución de todo el diseño del sistema eléctrico en baja tensión para el edificio Centro Regional del MPPSP, en San Cristóbal, Edo. Táchira. El alcance contempla: memoria descriptiva, canalizaciones en baja tensión, especificación de equipos, estudios de cargas, diagramas unifilares, diagramas de tablero, iluminación interior y exterior, tomacorrientes, cómputos métricos, etc. Coordinación multidisciplinaria.

31/10/2016 30/04/2017

Y para que así conste a los efectos oportunos, se expide el presente certificado a día 7 de julio de 2017.

Fdo. D. Alfonso Andrés Picazo Presidente de INCLAM, S.A.

INCLAM DE VENEZUELA C.A.

Torre Sindoni, Piso 19Oficina 19-01

Maracay-Edo. AraguaRIF: J-31467844-2

Telefax: 0243/2325141E-Mail: iesus.vicuna®inclam.com

Jesús Vicuña Redondo titular de la Cédula de Identidad Nro. E84.402.564, como representante

legal de INCLAM DE VENEZUELA, C.A.

CERTIFICAQue el INO. PEDRO ANTONIO FRANCO AROCHA, con Cédula de Identidad número

11.058.345 ha trabajado como Ingeniero Electricista en los siguientes trabajos ejecutados por

INCLAM DE VENEZUELA CA', . .

Objeto del servicio realizadoPeriodo de

participación

Proyecto, Rrocuray Rues!ilen marcha WU'ª la construcción de la nueva RlantaAbril 2011

J2QtabilizadoraBanialito.Mayo 2011

Caudal: 4 m3/s

Proyecto Sistema Integrado de Monitoreo y Asistenciª - SIMA. Sede La Californiª,MuniciRioSucre, Caracas (CEIEe): Ejecución de todo el diseño del sistema eléctricoen baja tensión WU'ª el edificio sede del Proyecto SIMA en la California MuniciRlo

2410112014Sucre, Caracas El alcance conte!OOla:memoria descrimivª, canalizaciones en baja

1310612014tensión. es~ificación de ~uiJ2Ql!, estudios de cargas, diagramas unifilares, diagramasde tablero, iluminacióº, tomacomentes, cómRutosmétricos, etc. CoordinaciónmultidisciRlinaria.

Proyecto Ingeniería de Detalles Distribución en Media y Baja Tensión. Proyectos SAEy COTER (CAVIM): Ejecución de todo el diseño del sistema de electricidad en mediay baja tensión Rara las facilidades asociadas a los Proyectos SAE y:COTER de Cavim. 30/0812012

El alcance contemRla:memoria descriRtivª, canalizaciones, es~cificación de eguiJ2Qs, 06/0512014

estudios de car~, diaaramas unifilares, diagramas de tablero, iluminación, cómRutosmétricos, etc. Coordinación multidisciRlinaria.

y para que así conste a los efectos oportunos, se expide el presente certificado a día 7 de julio de

2017.r"~,'~7;-":.;:":~r;~:;;~T;¡§;iI