OIL AND GAS PROJECTS REFERENCE LIST

ProTek® Fire & Blast Enclosures for ESDV/Actuator and Riser Hang-off Protection

Date Client Project

2014

Cabinet Protection Enclosures for Sleipner A and T

2014 Borgland Dolphin Fire Protection Panels

2013

Passive Fire Protection Enclosure for Gabon Anguilles Project

2013

Manufacture and Supply, of Flange Jet Fire Cover for Schoonebeek SRT Project

2013

ESDV & Actuator Fire and Blast Protection for CLOV FPSO

2013

Calorimeter Blast Composite Container for Luno Project

2013

4” Valve Protection Covers for Ellesmere Port

2012

Flange Protection Covers for Tartan Petronella and Buchan Projects

2012

147-off Flange & Valve Protection Covers for Sløvåg Tank Farm

2012 Wave Protection Actuator Enclosures for Yadana Subsidence Project

OIL AND GAS PROJECTS REFERENCE LIST

2012

Actuator & Receiver PFP Enclosures for Black Point Gas Supply

2012

MST Logistics

Flange Protection Covers for Shah Deniz project

2012

MG Normandie

Fire & Blast Protection Enclosures and Flange Protection Covers at St. Clair sur Epte

2012

StatoilHydro Norne Skuld ESDV’s/Actuator’s & Riser Hang-off fire and Blast Protection Enclosure

2012

Flange Protection Cover for Conwy Project

2012

Fire & Blast Protection Enclosures for Gabon Anguilles Project

2011

Fire Protection Enclosure for CAP Module for Gudrun Platform

2011

Eiffage Constructions Metalliques Gabon Anguilles ESDV’s & Actuator’s Fire & Blast Protection Enclosures

2011

Villiers le Bel ESDV, Actuator and Pipe Fire & Blast Protection

2011

StatoilHydro Norne Marulk ESDV’s/Actuator’s and Riser Hang-off Fire & Blast Protection Enclosure

2011

Design, Manufacture and Supply, for Freezer Room Container for Statoil M & M Project Gullfaks/Visund

2010

Design, Manufacture and Supply, of Equipment & Flange Jet Fire Covers for Schoonebeek SRT Project

2009

Mokveld Valves BV Fire & Blast Protection for Valve Actuators FRSU Livorno LNG

2009 AKOP StatoilHydro Norne M ESDV/Actuator and Riser Hang-off Fire & Blast Protection Enclosure

2008 AKOP StatoilHydro Norne ESDV/Actuator and Riser Hang-off Fire & Blast Protection Enclosure

2007 Shell/StatoilHydro Ormen Lange Accumulator Enclosures for Blow Down System

2007 AKOP

StatoilHydro Statjford B ESDV and Actuator PFP Enclosure

2005

Statoil Snøhvit Hammerfest LNG plant ESDV and Actuator Fire & Blast Protection

2005 Statoil Norne ESDV/Actuator and Riser Hang-off Fire & Blast Protection Enclosure

2004

Valve Passive Fire Protection Enclosures

OIL AND GAS PROJECTS REFERENCE LIST

2003

Jet Fire & Blast Enclosure for Sleipner Riser ESDV Control System

2003

Design and supply of large Fire, Blast and Impact Resistant Enclosures for 36” diameter ESD Valves on LOGGS and 36” LOGGS ESDV Enclosure modifications

2003

Riser Hang-off Jet Fire & Blast Protection Covers for Ringhorne Jurassic on JOTUN

2002

Brent Penguin Riser Hang-off Jet Fire Cover

2002

Passive Fire Protection of ESDVs on Phillips Judy/Jade

2001

Passive Fire Protection Enclosure for ESDV Actuator Control System for

Ekofisk II

2000

Modification of ESDV Jet Fire Protection Systems for JOTUN FPSO

1999

Design and manufacture of Riser Hang-off, ESDV and Riser Spool Jet Fire & Blast Protection Systems for LAMINARIA FPSO

1999

Design and manufacture of Fire & Blast Protection Enclosure for ESD Valve and Actuator for ADNOC

1999

Manufacture and supply Riser Hang-off and ESDV Jet Fire & Blast Protection for NORNE gas export

1999

Design and manufacture of Riser Hang-off and ESDV Jet Fire & Blast Protection systems for JOTUN FPSO

1999

Design manufacture and supply of Riser Hang-off Passive Jet Fire Protection Enclosures for the Åsgard B Project

1998

Design manufacture and supply of Riser Hang-off and ESDV/Actuator Jet Fire Protection Enclosures for Åsgard A Project

1998

Pressure Vessel Insulation and Jet Fire Protection for GALLEY Development

1998

Design and manufacture of Fire & Blast Protection Enclosure for Water Deluge Valve on LAMINARIA

OIL AND GAS PROJECTS REFERENCE LIST

1998

Supply of ESDV Fire & Blast protection for JANICE

1998

ESDV and Actuator Fire & Blast Protection for EXCALIBUR and LANCELOT

1997

Design and manufacture of Fire & Blast Resisting Enclosures for EKOFISK II Platform for Phillips Norway

1992-97 Supply of 70 ESDV and Actuator Jet Fire & Blast Protection Enclosures on BRUCE I and II

1996

Offshore modification of Fire & Blast Resistant Enclosures on BRUCE Platform

1995

Detail design, supply and installation of 4-off Actuator and 2-off Accumulator Skid Jet Fire Protection Enclosures for SULLOM VOE Oil Terminal. Blast & Fire protection system for 30" and 36" ESD valves at GRANGEMOUTH for BP Oil

1995

Design, manufacture and supply of 48 Deluge Skid Protection Norfass (Norway) Enclosures for TROLL Onshore Phase I Kollsnes

1995

Detail design, manufacture and supply of Lightweight ESDV Protection Enclosures for TCP-2

1995

Detail design, manufacture, supply and installation of 66 EBV and 48 Aker Kellogg associated Accumulator Enclosures for TROLL Onshore Phase I Kollsnes

1994

Design and manufacture of three Temporary Safe Refuges to provide Jet Fire, Blast and Ballistic Protection for three HEWETT Platforms

OIL AND GAS PROJECTS REFERENCE LIST

ProTek® Fire and Blast Walls and Cladding

Date Client Project

2012

Design, manufacture and supply Jet Fire & Blast Resistant Pipe Penetration Panels for North Rankin Platform Fire & Blast Wall.

2011

Design, manufacture and supply of Jet Fire Resistant Fire & Blast Wall for ABKATUN A Platform.

2009

Design, manufacture and supply Jet Fire & Blast Resistant Pipe Penetration Panels for Talisman Norge YME Fire & Blast Wall.

2009

Design, manufacture and installation of H60 Cladding Panels for Forties Charlie

2009

Design, manufacture and installation of J15 Cladding Panels for Scott Drilling Platform

2008

Design, manufacture and installation of H0 Lifeboat Cradle Protection for Britannia Platform

2006

Statoil Statfjord B Steelwork Protection Cladding

2000

Design, manufacture and installation of Passive Jet Fire Protection for ESDV Actuators and Escape-way/Lifeboat Muster Area for the South Tapti Gas Platform Offshore Bombay

1999

Retrofit Fire & Blast protection for EKOFISK B11 Platform

1999

Design and manufacture of A60 Stair Tower Cladding for EKOFISK B11 Platform

OIL AND GAS PROJECTS REFERENCE LIST

1996

Detail design and manufacture H60 Bulkhead Fire Protection on CLAYMORE 'A' Platform

1993

Manufacture and supply of H60 Fire Protection Panels for Escape-way on EKOFISK

1993

Manufacture and supply of Radiant Heat Protection Panels for CLAYMORE

1993

Design, development and supply of special H60 Fire & Blast Panels for EKOFISK Control Centre refurbishment

1993

Design and supply of Fire Protection Panels on HYDE

1993

Design, development and supply of Lightweight Jet Fire and 1.0 bar Blast Wall for TARTAN ALPHA

OIL AND GAS PROJECTS REFERENCE LIST

ProTek® Subsea

Client Project

Manufacture and supply of Composite Riser Clips for FOINAVEN Flexible Riser System

Development, testing and supply of Electrically Conductive Resin for repair of Subsea Anodes

Development and testing of Subsea Composite Clamps for FOINAVEN Riser repair

Design and manufacture of Composite Material Data Pods for Ultra-deep Water Riser System Instrumentation

Design, develop and manufacture of Structural Composite Components for GIRASSOL Deep Water Risers

Design, development and Construction of Subsea Composite Clamp for FOINAVEN Riser repair

Technical audit and review of FOINAVEN Riser repair using Composite Clamps

Design and fabrication of Subsea Composite Clips

Development, supply and injection of High Strength Subsea Grout for Docking Pile on MALORY Project

Modification to SSBV Dropped Object Protection Enclosure for Liverpool Bay

Fuel Subsea Design, develop, manufacture and test Composite Umbilical Arm

OIL AND GAS PROJECTS REFERENCE LIST

Design development of Subsea Dropped Object Protection Enclosures Brown & Root for LIVERPOOL BAY

Manufacture, system test and deliver 4-off SSBV Dropped Object Protection Enclosures for LIVERPOOL BAY

OIL AND GAS PROJECTS REFERENCE LIST

ProTek® PIPE PROTECTION & REPAIR SYSTEMS

Date Client Project

2011

Talisman

Riser Protection for Fulmar Platform

2009 AKOP Design, manufacture and installation of AH001 Caisson Repair for Hess AH001 Floating Platform

1997

In-situ reinstatement of Corroded Pipework on TIFFANY using Composite Pipe Wrap

1996

Pipe Wrapping repairs for Corroded Under-deck Drainage Pipework on BP FORTIES

1995

Develop and test in-situ Pipe Repair System for Corroded Under-deck Drains and Low Pressure Piping

OIL AND GAS PROJECTS REFERENCE LIST

ProTek® SPECIALITY ENGINEERING

Date Client Project

2003

Syntactic Downhole Flotation Balls development for Enhanced Oil Recovery – project ongoing through to 2005

2002

FPSO Tanker repair study

1997

Design and build of a Composite Sump Tank for HEWETT Platform for Phillips Petroleum UK

1996 FWWG

Detail design, manufacture and supply Lightweight Fire & Blast Rated Personnel Escape Hatch for TARTAN ALPHA

1996

Design, development, testing and manufacture of High Temperature, High Pressure Buoyancy for Downhole applications

1995 Stolt Comex

Development, supply and injection of Water Tolerant Low Temperature curing epoxy resin for grouting of Wellhead Protection Structure NEWSHAM Development

1993

Detail design and supply of Ultra-light-weight platform Name Signs for CLAYMORE CAP

1993 Subsea Ltd.

Development of special resin system for Diverless Caisson repair on BERYL ‘B’

1993

Development of High Impact Energy Blow-out Panels (350 kJ) on BRENT

1990

Provision of training and quality control procedures for Composite Material Manufacture for Offshore Applications

1990

Riser Protection against 15 kJ impact on MORECAMBE BAY