Upload
others
View
59
Download
0
Embed Size (px)
Citation preview
NX100 Transmitter
Troubleshooting Manual
Document:NHB-NX100-TRB
Issue: 3.3 2017-03-31
Status: Standard
Nautel Limited10089 Peggy’s Cove RoadHackett’s Cove, NS Canada B3Z 3J4Phone: +1.902.823.3900 orToll Free: +1.877.6NAUTEL (6628835) (Canada & USA only)Fax: +1.902.823.3183
Nautel Inc. 201 Target Industrial Circle Bangor, Maine USA 04401 Phone: +1.207.947.8200 Fax: +1.207.947.3693
Customer Service (24 hour support) +1.877.628.8353 (Canada & USA only)+1.902.823.5100 (International)
Email: [email protected]: www.nautel.com
The comparisons and other information provided in this document have been prepared in good faith based on publicly available information. The reader is encouraged to consult the respective manufacturer's most recent published data for verification.
© Copyright 2017 NAUTEL. All rights reserved.
NX100 Troubleshooting Manual Table of contents
Page v
Contents
Release control record vii
Responding to alarms 1-1
Corrective maintenance 1-1Electrostatic protection 1-3Identifying an alarm 1-4Troubleshooting an alarm 1-6Responding to alarms 1-42Removing and reinstalling RF power modules 1-47Troubleshooting RF power modules 1-51Control/exciter panel board removal/replacement 1-57PDM Drive Distribution PWB replacement 1-65RF drive distribution PWB replacement 1-66Rack Interface PWB replacement 1-67SCR Rectifier Inspection/Replacement 1-69Low Voltage Power Supply Replacement 1-71RF Power Module Fan Tray replacement 1-72Single Board Computer (SBC) Replacement 1-73Arc Detector UV Sensor Replacement 1-76
Parts Lists 2-1
Parts information 2-1Family tree 2-1How to locate information about a specific part 2-1Column content 2-2OEM code to manufacturer’s cross-reference 2-3Common abbreviations/acronyms 2-4
NX100 Troubleshooting Manual Table of contents
Page vi Issue 3.3 2017-03-31
Wiring/connector lists 3-1
Wiring lists provided 3-1Wiring lists not provided 3-1Connector mating information 3-1Wire colours 3-1Printed wiring board patterns 3-1
Reading Electrical Schematics 4-1
Component values 4-1Graphic symbols 4-1Logic symbols 4-1Reference designations 4-1Unique symbols 4-2Identifying schematic diagrams 4-2Structure of schematics 4-2Locating schematic diagram(s) for a functional block 4-3Locating a part or assembly on a schematic 4-3
Mechanical Drawings 6-1
Identifying mechanical drawings 6-1Content of mechanical drawings 6-1
List of terms 7-1
NX100 Troubleshooting Manual
Issue 3.3 2017-03-31 Page vii
Release control record
Issue Date Reason
3.0 2012-11-01 Release 3 of product (NARA52B)
3.1 2015-10-30 Various changes to Section 1 for software release NX 4.5.
3.2 2016-02-08 Section 1 - Responding to Alarms: changed the description of several B+ related alarms; supports NX SW version 4.6.
3.3 2017-03-31 Section 1 - Added SBC replacement, arc detector UV sensor replacement and added clarification to SCR inspection/replacement, power module replacement, and digital AM PWB replacement procedures. Updated the External PDM Inhibit and Interlock Open troubleshooting sections to reflect the NAPC160B/01 control/interface PWB assembly. Updated alarm table(s).
Deleted “Detail Circuit Description” Section
Supports NX SW version 4.7.
NX100 Troubleshooting Manual
Page viii Issue 3.3 2017-03-31
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-1
Section 1: Responding to alarms
This section provides instructions you need when performing troubleshooting on the NX100 transmitter. This section includes the following topics:
• Corrective maintenance
• Electrostatic protection - see page 1-3
• Identifying an alarm - see page 1-4
• Responding to alarms - see page 1-42
• Troubleshooting RF power modules - see page 1-51
• Other Module Replacement Procedures - see page 1-41
If none of the procedures and alarms described in this section address your problem, contact Nautel for assistance.
Corrective maintenance
Corrective maintenance procedures consist of identifying and correcting defects or deficiencies that arise during transmitter operation. Local and/or remote alarm signals are generated when a malfunction occurs. If an alarm condition is caused by a malfunction in the RF power stage, the transmitter may maintain operation at a reduced RF output level. The nature of the fault – and station policy – will dictate whether an immediate maintenance response is necessary. Fault analysis and rectification may be conducted from three different levels, with a different technical competence level required for each: on-air troubleshooting, remote or local, and off-air troubleshooting.
On-air troubleshooting
On-air troubleshooting can be performed from a remote location, or locally at the transmitter site.
CAUTION: The transmitter contains many solid state devices that may be damaged if subjected to excessive heat or high voltage transients. Every effort must be taken to ensure that circuits are not overdriven or disconnected from their loads while turned on.
NX100 Troubleshooting Manual Responding to alarms
Page 1-2 Issue 3.3 2017-03-31
Remote troubleshooting
Remote on-air troubleshooting consists of monitoring the transmitter's radiated signal using an on-air monitor or via a LAN connection, and observing the status of each remote fault alarm indicator. Information obtained from these sources should enable an operator to decide whether an alarm response may be deferred to a more convenient time, an immediate corrective action must be taken, or if a standby transmitter must be enabled (if one is available). It is recommended that the significance of remote indications, and the appropriate responses, be incorporated into a station's standard operating procedures. Refer to “Identifying an alarm” on page 1-4 to determine the remedial action required for a given fault.
Local troubleshooting
Local on-air troubleshooting consists of monitoring the transmitter's integral meters and fault alarm indicators. Analysis of this data will normally identify the type of fault, and in most cases will determine what corrective action must be taken. Refer to “Identifying an alarm” on page 1-4 to determine the remedial action required for a given fault.
The power amplifier stage contains an integral modular reserve (IMR) feature. This feature permits the transmitter to operate at a reduced RF output level when a malfunction occurs in one of its power modules. Station operating procedures will dictate whether a reduced RF output level is acceptable. When a reduced RF output level can be tolerated, replacement of the defective RF power module may be deferred to a convenient time. A defective RF power module may be removed from the transmitter for servicing, while the transmitter is operating, provided that the conditions in the removal instructions detailed in “Removing an RF power module” on page 1-47 are met.
Off-air troubleshooting
Off-air troubleshooting must be performed when the replacement of a defective RF power amplifier module, or routine on-air calibration adjustments, will not restore operation.
It is recommended that the transmitter’s output be connected to a precision 50 resistive dummy load (rated for 1.5 times the rated transmitter carrier power) before starting off-air troubleshooting procedures. If an appropriate dummy load is not available, troubleshooting for a majority of faults can be performed with the RF power stage turned off. The transmitter may remain connected to its antenna system for these procedures.
WARNING:
Failure to follow the RF power module removal instructions may
result in injury to the operator and serious physical damage to the RF
power module and transmitter.
NOTE: Reduce the RF output level to a minimal value when troubleshooting faults in the power amplifier stage while the transmitter’s RF output is connected to the antenna system.
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-3
Electrostatic protection
The transmitter's assemblies contain semiconductor devices that are susceptible to damage from electrostatic discharge. The following precautions must be observed when handling an assembly which contains these devices.
Electrical discharging of personnel
Personnel should be electrically discharged by a suitable grounding system (e.g., anti-static mats, grounding straps) when removing an assembly from the transmitter, and while handling the assembly for maintenance procedures.
Handling/Storage
An assembly should be placed in an anti-static bag when it is not installed in a host transmitter, or when it is not undergoing maintenance. Electronic components should be stored in anti-static materials.
Tools/Test equipment
Testing and maintenance equipment – including soldering and unsoldering tools – should be suitable for contact with static sensitive semiconductor devices.
Stress current protection
Every precaution should be taken to ensure the static sensitive semiconductor devices are protected from unnecessary stress current. This is achieved by ensuring that current is not flowing when an electrical connection is broken, and that voltages are not present on external control/monitoring circuits when they are connected.
CAUTION: Electrostatic energy is produced when two insulating materials are rubbed together. A person wearing rubber-soled shoes, walking across a nylon carpet or a waxed floor, can generate an extremely large electrostatic charge. This effect is magnified during periods of low humidity. Semiconductor devices such as integrated circuits, field-effect transistors, thyristors and Schottky diodes may be damaged by this high voltage unless adequate precautions are taken.
NX100 Troubleshooting Manual Responding to alarms
Page 1-4 Issue 3.3 2017-03-31
Identifying an alarm
You can identify an alarm by viewing the Transmitter Status page (Figure 1.1), either locally on the front panel of the transmitter, or remotely through an ethernet connection. After successfully identifying an alarm, attempt to determine the cause of the alarm and correct it (see “Troubleshooting an alarm” on page 1-6). The colour of the Status button at the bottom of the AUI indicates the severity of the highest offending alarm. The button can display green, amber or red. When the Status button is:
• Green - transmitter is on, with no known faults that would affect the normal operation of the transmitter.
• Amber - a fault is present that affects the normal operation of the transmitter and may cause a reduction n RF power, but the transmitter is still producing RF power.
• Red - a fault is present and the transmitter is not producing power.
Figure 1.1: Transmitter Status Page
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-5
Click the Status button to view the Transmitter Status page (Figure 1.1), which displays a list of active alarms. Alarms are listed by their origin (Device column), then by name (Alarm column), and then by severity (Level column).
1. The Device column displays the sub-system origin of the alarm. The sub-systems that can bedisplayed are:
• Controller: All Alarms in this sub-system apply to the controller.
• Exciter A or B: All Alarms in this sub-system apply to an exciter (A or B)
• Rack #: All Alarms in this sub-system apply to a rack (cabinet) (Rack 1)
• Module #: All Alarms in this sub-system apply to a specific RF power module (1 through40)
• Exgine: For systems with Exgine installed, all alarms in this sub-system apply to theExgine.
2. The Alarm column displays the alarm name. Use this name as a cross-reference duringtroubleshooting (see “Troubleshooting Alarms” on page 1-7).
3. The Level column displays a symbol that indicates the severity of the alarms, as follows:
• One Yellow ! - low severity, normal operation of transmitter not affected
• One Orange ! - medium severity, normal operation of transmitter affected, RF outputmay be reduced
• Two Red !! - high severity, RF output is inhibited
NX100 Troubleshooting Manual Responding to alarms
Page 1-6 Issue 3.3 2017-03-31
Troubleshooting an alarm
Troubleshoot an alarm as follows:
1. Attempt to clear any latching alarms by pressing the Reset button on the bottom banner ofthe AUI. If the alarm persists, it will not be cleared from the display.
2. Locate the alarm name in Table 1.1 on page 1-7 (sorted alphanumerically for each sub-system) to determine the cause of the alarm and perform any recommended procedures inthe Description and Troubleshooting Action column. This may also lead to replacing asuspect PWB, power supply or fan, as detailed in Table 1.3 on page 1-41.
3. Refer also to Table 1.2 on page 1-36 for Summary alarms that can occur - when properlyconfigured - as remotely monitored outputs.
4. If troubleshooting and subsequent replacement of a suspect PWB or module causes thealarm to disappear, the alarm has been successfully cleared. If the fault condition does notclear contact Nautel Customer Service for assistance.
NOTE: Before undertaking any troubleshooting, record all AUI meter readings and note if any other alarms are displayed on the Transmitter Status page. Record all alarms. The most convenient way to do this is by using a web browser over a LAN connection to copy the Critical Parameters. Go to Menu, User Settings and select Critical Parameters. Select Capture Meters button followed by Copy Meters button and paste into a spreadsheet or word file for later viewing if necessary. Capture alarms in the same manner - Capture Alarms followed by Copy Alarms and paste into file.
NOTE: Table 1.2 lists the Summary alarms that can be configured for remote monitoring through the local or remote AUI’s Remote I/O -> Remote Outputs menu (see the “Operating the Transmitter” section of the Operations & Maintenance Manual for configuration details). Each Summary alarm can be triggered by any one alarm in a specific sub-set, as shown in Table 1.2. The Description and Trigger Alarms column of Table 1.2 provides a brief description of the summary alarm and a list of the triggering alarms. To determine the root cause(s) of a Summary Alarm, check the local or remote AUI for an offending trigger alarm and refer to its troubleshooting information for more details.
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-7
Table 1.1: Troubleshooting Alarms
Alarm (with Prefix) Description and Troubleshooting Action
Controller: Audio Loss Shutdown
This alarm occurs if the modulation level is below the preset threshold for the designated period of time set in the Audio Loss settings of the current preset, and the desired action was set to RF Inhibit. This will cause the transmitter to shut down its RF output until the exciter determines that the modulation source has returned. If this alarm is unexpected, check the audio inputs specified in the preset and verify there is signal present.
Controller: Arc Shutback This alarm indicates the transmitter has entered a shutback (see Shutback on page 3.1.10 of the Operations & Maintenance Manual for a description of the shutback routine) due to one of the rack controller’s arc detectors being activated. When this fault occurs, the transmitter immediately inhibits PDM and the transmitter's output power drops to 0 W. Once the fault clears the transmitter will automatically recover, either to the power setpoint, or to a reduced power as determined by the cutback routine (see “Cutback:” on page 1-8 of the Operations & Maintenance Manual for a description of the cutback routine). Visually inspect the inside of the transmitter to locate the fault causing the arc detector to trigger.
Controller: Brownout Reset
This alarm is only visible in the transmitter logs, and indicates the controller was reset because its +5 V power supply voltage was less than +4.3 V, but remained above +1.4 V, and then subsequently recovered. This alarm should occur concurrently with other alarms. Follow the troubleshooting information for the associated alarms. If the alarm persists without the presence of other alarms, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
NX100 Troubleshooting Manual Responding to alarms
Page 1-8 Issue 3.3 2017-03-31
Controller: Combiner Interlock Open
This alarm will only occur if the transmitter is connected in a combined system. The alarm indicates that the interlock signal from the combiner is open. When this alarm occurs, the transmitter immediately inhibits the PDM and the transmitter's output power drops to 0 W. If this condition persists for more than 10 seconds, the transmitter will inhibit the RF power modules, fans and B+ power supply. The transmitter will automatically recover when the condition is cleared. Check the combiner for a condition that may cause it to open the interlock to the transmitter. If so, troubleshoot the cause of that condition. If not, inspect the wiring between the combiner and the transmitter and verify there is no damage. If the alarm persists, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Controller: Controller Reset
This alarm is only visible in the transmitter logs, and indicates the controller was reset because its +5 V power supply voltage was less than 1.4 V, which normally happens due to a loss of ac power. If the controller is rebooting without losing ac power to the transmitter, check for the presence of other alarms at the time of the controller reset and follow the troubleshooting information for those alarms. Otherwise, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-9
Controller: EEPROM Failure: Config
This alarm occurs when the transmitter is unable to read the following settings from EEPROM upon boot-up. The transmitter will revert to its initial default settings, which may be different from the values set before the transmitter was shipped. The alarm will remain asserted until at least one of the settings are changed. Affected settings are:
– Main Exciter (Defaults to A)
– Standby Exciter Installed (Defaults to Yes)
– Exciter Sync (Defaults to None)
– Active Max Power Lockout (Defaults to 1)
– RF Monitor Select (Defaults to forward power)
– Host Watchdog Enable (Defaults to OFF, should be turned ON)
– Network Configuration
Configure the affected settings as desired. Cycle (turn off, then on) ac power to the transmitter. If the alarm persists, replace the battery on the control/interface PWB and retry the above steps. If the alarm persists, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Controller: EEPROM Failure: Thresholds
This alarm occurs when the transmitter is unable to read its configuration for transmitter type and rack interface serial numbers from EEPROM upon boot-up. The transmitter will revert to its initial default settings, which may be different from the values set before the transmitter was shipped. The alarm will remain asserted until the setting is changed. Change the transmitter type to the correct setting.Remove and re-apply the ac power to the transmitter. If the alarm persists, replace the battery on the control/interface PWB and retry the above steps. If the alarm persists, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Page 1-10 Issue 3.3 2017-03-31
Controller: EEPROM Failure: Potentiometers
This alarm occurs when the transmitter is unable to read its RF Symmetry Adjustment calibration from EEPROM upon boot-up. The alarm will remain asserted until the RF Symmetry has been re-calibrated. When this alarm occurs, the transmitter will load a default level of exactly mid-scale for the symmetry adjustment potentiometers. Set the RF Symmetry Adjust per the factory configuration. Cycle (turn off, then on) ac power to the transmitter. If the alarm persists, replace the battery on the control/interface PWB and retry the above steps. If the alarm persists, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Controller: EEPROM Failure: Remotes
This alarm occurs when the transmitter is unable to read its remote I/O configuration from EEPROM upon boot-up. The transmitter will revert to the initial default remote I/O settings and the alarm will remain asserted until a new remote input/output is configured. Reconfigure the remote I/O settings as desired. Cycle (turn off, then on) ac power to the transmitter. If the alarm persists, replace the battery on the control/interface PWB and re-try the above steps. If the alarm persists, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Controller: EEPROM Failure: Schedule
This alarm occurs when the transmitter is unable to read its schedule configuration from EEPROM upon boot-up. The transmitter will establish a new, completely blank schedule. The alarm will remain asserted until at least one new scheduled event is created. Recreate the desired schedule settings. Cycle (turn off, then on) ac power to the transmitter. If the alarm persists, replace the battery on the control/interface PWB and retry the above steps. If it still persists, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-11
Controller: Exciter A (or B) Not Responding
This alarm occurs when the controller is configured to expect exciter A (or B) is installed, and it has failed to receive any serial response from that exciter. The alarm is cleared if the controller is configured to expect that same exciter is not installed, or if it receives a serial response from the exciter. When this alarm occurs on the standby exciter, automatic changeover will be inhibited. When this alarm occurs on the main exciter, if automatic changeovers are enabled and the main exciter is active and the standby exciter is responding to serial communication, an automatic changeover will occur. If there are two exciters in the transmitter, swap exciter positions. If the alarm follows the exciter, or there is only one exciter in the system, replace the digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58). If the alarm persists, or the alarm remains with the position, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Controller: Exciter Changeover
This alarm indicates that an automatic exciter changeover has occurred. This alarm will occur as a result of another alarm triggering the automatic exciter changeover. Follow the troubleshooting information for the associated alarm.
Controller: Exgine Not Responding
This alarm indicates the transmitter is configured for an IBOC mode of operation and the controller has not received any communication from the Exgine over a set period of time. The alarm will clear if the transmitter is configured for a non-IBOC mode of operation, or the controller receives a response from the Exgine. If the Exgine is operating normally, ignore this alarm. If the Exgine is not operating normally, cycle ac power to the transmitter. If the alarm persists, inspect the cabling between the Exgine and the transmitter controller. If the cabling is acceptable and the alarm persists, replace the Exgine PWB (see “Exgine PWB replacement” on page 1-64). If the alarm persists, or the alarm remains with the position, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Page 1-12 Issue 3.3 2017-03-31
Controller: External PDM Inhibit
This alarm occurs if the external PDM inhibit circuit, wired to the control/interface PWB, is closed. When this alarm occurs, the transmitter immediately inhibits the PDM and the transmitter's output power drops to 0 W. The transmitter will automatically recover when the condition is cleared. Ensure the transmitter is set to RF Off and disconnect the PDM inhibit circuit from the transmitter. Measure the impedance of the interlock circuit. If the impedance measures short circuit (low impedance) the PDM inhibit is closed, and it will be necessary to locate the external device that is causing this condition. If the impedance does not measure short circuit, verify the PDM inhibit circuitry has been properly configured. If the PDM inhibit circuitry is properly configured and the alarm persists, replace the control PWB (see “Controller: External PDM Inhibit” on page 1-42).
Controller: External Reset
This alarm is only visible in the transmitter logs, and indicates the controller was reset by triggering the controller's reset pin. If this alarm continues to occur unexpectedly, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Controller: Fast SWR Shutback
This alarm indicates the peak reflected power measured by the directional coupler at the output of the transmitter has exceeded the factory-set threshold. When this alarm occurs, the transmitter immediately inhibits the PDM and RF drive (see “Shutback:” on page 1-8 of the Operations & Maintenance Manual). Once the fault clears, the transmitter will automatically recover, either to the power setpoint, or to a reduced power as determined by the cutback routine (see “Cutback:” on page 1-8 of the Operations & Maintenance Manual). If this alarm occurs in conjunction with the Exciter's SWR Shutback alarm, it generally indicates a fault in the transmitter's external RF output network (e.g., rigid-line, antenna, etc.). If this alarm is occurring while the Exciter's SWR Shutback alarm is not, verify the wiring between the directional coupler and the control/interface PWB is not damaged. If not, verify the Fast SWR Shutback threshold is set properly (contact Nautel to obtain the correct setting for your transmitter). If this threshold is set correctly and the alarm persists, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-13
Controller: GPS Not Responding
This alarm indicates the transmitter is configured to use a GPS sync PWB as a frequency and phase reference, but the controller is not receiving communication from the GPS sync PWB. The alarm will clear when the transmitter is configured to not use the GPS sync PWB as the frequency and phase reference, or the controller receives communication from the GPS sync PWB. Inspect the wiring between the GPS sync PWB and the control/interface PWB, if applicable. If the wiring is acceptable, replace the GPS sync PWB (see “GPS Sync PWB replacement” on page 1-64).
Controller: GPS PLL Unlocked
This alarm indicates the timing phase-lock-loop between the 1 PPS signal from the GPS and the 10 MHz reference is not locked. This can occur due to a power failure, or because the GPS receiver is not locked to the GPS satellites. Verify the GPS antenna is installed and is located in a spot where it is possible to obtain a GPS satellite lock. If the alarm persists, replace the GPS sync PWB (see “GPS Sync PWB replacement” on page 1-64).
Controller: GPS Receiver Not Responding
This alarm occurs when the GPS receiver is not responding to serial commands on the GPS sync PWB. When this occurs, the GPS sync PWB's phase-lock-loop will not be locked, and the timing signals will be free-running. Cycle (turn off, then on) the ac power to the transmitter. If the alarm persists, replace the GPS sync PWB (see “GPS Sync PWB replacement” on page 1-64).
Controller: GPS Sync No 1-PPS
The alarm occurs when the 1 PPS output from the GPS receiver is not present. This occurs when the GPS receiver is not locked to the GPS satellites. When the 1 PPS input is not present, the phase-lock-loop cannot lock properly to discipline the 10 MHz reference. Verify the GPS antenna is installed and is located in a spot where it is possible to obtain a GPS satellite lock. If the alarm persists, replace the GPS sync PWB (see “GPS Sync PWB replacement” on page 1-64).
Controller: GPS Unlocked
This alarm occurs when the GPS module on the GPS sync PWB does not have a valid satellite lock. When this alarm occurs, the phase-lock-loop is no longer running to discipline the 10 MHz oscillator, and it is allowed to free-run at the last valid setting. Verify the GPS antenna is installed and is located in a spot where it is possible to obtain a GPS satellite lock. If the alarm persists, replace the GPS sync PWB (see “GPS Sync PWB replacement” on page 1-64).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Page 1-14 Issue 3.3 2017-03-31
Controller: High RF Drive
This alarm indicates the controller's RF Drive Duty Cycle meter has risen above 60% for longer than 10 seconds. This alarm will cause an exciter changeover, if automatic changeover is enabled and the transmitter is operating on the main exciter. If there are two exciters in the transmitter, swap exciter positions. If the alarm follows the exciter, or there is only one exciter in the system, replace the digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58). If the alarm persists, or the alarm remains with the position, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Controller: Host Network Down
This alarm indicates the transmitter is configured to have networking enabled, but the host is indicating there is no network connectivity. If the transmitter is not connected to a network, the alarm can be inhibited by changing the network settings to static IP and setting the IP address to 0.0.0.0. If the transmitter is connected to a network, verify the network settings are configured properly, and the network cable is connected to the correct port on the transmitter.
Controller: Host Not Booted
This alarm indicates that the controller has not received any communication from the host since the last time the controller booted (i.e., was powered up). The occurrence of this alarm is normal for approximately one to five minutes while the host is booting, immediately after ac power has been applied to the transmitter. If this alarm continues to occur more than 30 minutes after ac power has been applied to the transmitter, cycle (turn off, then on) the ac power. If the alarm persists after 30 minutes, replace the SBC or control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Controller: Host Not Responding
This alarm indicates that the controller has not received any communication from the host in a set period of time. The occurrence of this alarm is normal for approximately one to five minutes while the host is booting, immediately after ac power has been applied to the transmitter. If this alarm continues to occur more than 30 minutes after ac power has been applied to the transmitter, cycle (turn off, then on) the ac power. If the alarm persists after 30 minutes, replace the SBC or control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-15
Controller: Internal Watchdog Reset
This alarm will only be seen in transmitter logs, and indicates that the controller was reset by its internal watchdog. If this alarm persists, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Controller: Interlock Open
This alarm indicates that the external interlock input wired to the control/interface PWB is open. An alarm will be triggered by user-set conditions (e.g., the state of the door to the transmitter room). When this alarm occurs, the transmitter immediately inhibits the PDM and the transmitter's output power drops to 0 W. If this condition persists for more than 10 seconds, the transmitter will inhibit the RF power modules, fans and B+ power supply. The transmitter will automatically recover when the condition is cleared. With the transmitter set to RF Off, disconnect the interlock circuit from the transmitter. Measure the impedance of the interlock circuit. If the impedance measures open circuit (high impedance) the interlock is open, and it will be necessary to locate the external device that is causing this condition. If the impedance does not measure open circuit, verify the interlock circuitry has been properly configured. If the interlock circuitry is properly configured, make a temporary jumper and use it to short out the interlock circuit. If the alarm disappears, the transmitter is operating as expected and it will be necessary to locate the external device that is causing this condition. If the alarm persists, replace the control PWB. See “Controller: Interlock Open” on page 1-43.
Controller: Jumped to Bootloader
This alarm is only visible in the transmitter logs, and indicates the controller was reset due to performing a firmware upgrade. If this alarm is occurring when a firmware upgrade is not being performed, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Controller: Low Battery This alarm occurs if the voltage of the backup battery has fallen below an acceptable level. Replace the battery (BT1) on the control/interface PWB while ac power is on. If the alarm persists after replacing the battery, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Page 1-16 Issue 3.3 2017-03-31
Controller: Low RF Drive This alarm indicates the controller's RF Drive Duty Cycle meter has fallen below 40% for longer than 10 seconds. This alarm will cause an exciter changeover, if automatic changeover is enabled and the transmitter is operating on the main exciter. If there are two exciters in the transmitter, swap exciter positions. If the alarm follows the exciter, or there is only one exciter in the system, replace the digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58). If the alarm persists, or the alarm remains with the position, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Controller: Out of Memory Reset
This alarm is only visible in the transmitter logs, and indicates the controller automatically reset because it ran out of the memory required to continue normal operation. If the alarm persists, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Controller: PDM Latch This alarm indicates that the PDM latch circuitry on the control/interface PWB has tripped, causing the transmitter to shut down and latch off. If automatic changeovers are enabled and the transmitter is operating on the main exciter, an automatic changeover will occur, and the latch will be cleared, allowing the transmitter to return to the current preset settings. If automatic changeovers are disabled, or if the transmitter was already operating on the standby exciter when this event occurred, try resetting the transmitter alarms. If the alarm persists, press RF Off, press the Reset button (S1) on the digital AM exciter PWB, then press RF On. If the alarm persists, check modulation levels being applied to the selected input and verify they are as expected. If the alarm persists, replace the digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58).
Controller: Power Loss This alarm indicates that the controller lost power at the time the event was logged. The alarm should occur concurrently with other alarms. Follow the troubleshooting action for the associated alarm(s). Otherwise, if the alarm persists without the presence of other alarms, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-17
Controller: Rack 1 Not Responding
This alarm indicates that the controller is no longer receiving serial communication from Rack 1. No action is taken. Check the wiring and connections between the control/interface PWB and the rack interface PWB and verify there is no damage. If the wiring is OK, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63). If the alarm persists, replace the affected cabinet’s rack interface PWB (see “Rack Interface PWB replacement” on page 1-67).
Controller: Unknown Reset Cause
This alarm is only visible in the transmitter logs, and indicates the controller was reset, but it was unable to determine the cause of the reset. If the controller is rebooting unexpectedly, check for the presence of other alarms at the time of this alarm and follow the troubleshooting action for the associated alarm(s). Otherwise, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Exciter A/B: AES1 (or 2) Unlocked
This alarm indicates there is no AES data detected on the applicable AES (1 or 2) input and that same input is selected as the active input in either Analog or Digital settings for the active preset. Verify there is valid AES data being applied to the corresponding input on the control/interface PWB. If there is data being applied to the correct input and the alarm persists, replace the digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58) or the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Exciter A/B: AM Input Loss
This alarm occurs if the input signal being used to generate the analog AM modulation is low or not present. This alarm will be triggered immediately if the AES input is unlocked, or after 2 minutes if the incoming modulation level is below 10%. The presence of this alarm will trigger an exciter changeover if automatic changeover is enabled and the transmitter is operating on the main exciter. Verify that the active preset is calling up the correct audio input and is set for the correct input level. Verify that there is a valid audio signal on the audio input being used. If the alarm persists, replace the associated digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Page 1-18 Issue 3.3 2017-03-31
Exciter A/B: Audio Loss This alarm occurs as a result of the modulation being below the specified threshold for the designated period of time set in the remote AUI’s Audio Loss tab for the current preset. This will cause the action specified in the preset to be taken. Check the audio inputs specified in the preset and verify there is signal present.
Exciter A/B: Audio Overmod Protection
This alarm indicates that the exciter has reduced the output signal due to overmodulation on the audio input. This alarm is typically caused by low frequency or excessive modulation, although it can also occur if the DRM AES input sensitivity is incorrectly configured, resulting in too much signal level. The alarm will clear and allow the gain to return to 100% once the excessive modulation condition disappears. Check the input signal being applied to the exciter and reduce the level as necessary.
Exciter A/B: B+ Sample Uncalibrated
This alarm indicates that the associated exciter’s B+ sample has never been calibrated. This alarm should only occur when replacing an exciter, and indicates the configuration file was not properly uploaded (see “Digital AM exciter PWB replacement” on page 1-58).
Exciter A/B: Carrier Sync Unlocked
This alarm occurs when the transmitter’s Sync Source is set to GPS Sync Card or Combiner and the exciter cannot lock to the 1 kHz signal used for phase synchronization. If the Sync Source is set to Combiner, this alarm will cause the transmitter to be inhibited, otherwise this alarm is displayed for information only. If the transmitter’s Sync Source is set to GPS Sync Card, check the connection between the GPS sync PWB and the control/interface PWB. If the connection looks OK, replace the GPS sync PWB (see “GPS Sync PWB replacement” on page 1-64). If the alarm persists, replace the associated digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58) or the control/interface PWB (see “Control/interface PWB replacement” on page 1-63). If the transmitter’s Sync Source is set to Combiner, check the connection between the combiner and the control/interface PWB. If the connection looks OK, troubleshoot the combiner’s synchronization signal source.
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-19
Exciter A/B: Cutback The forward power has been reduced due to multiple shutbacks. See “Cutback:” on page 1-8 of the Operations & Maintenance Manual for a description of the cutback routine. Check for associated alarms and refer to their troubleshooting information to determine the specific cause of the cutback.
Exciter A/B: Digital Input Loss
This alarm indicates the input signal being used to generate the digital modulation is too low or no longer present. This alarm will be triggered immediately if the AES input (DRM) is unlocked or the Exgine stream (IBOC) is missing, or if the DSP is receiving zeroes on the AES (DRM) or Exgine (IBOC) input for more than 100 ms. The presence of this alarm will trigger an exciter changeover, if automatic changeover is enabled and the transmitter is operating on the main exciter. Verify that the active preset is calling up the correct input and is set for the correct input level. Verify that there is a valid signal on the input being used. If the alarm persists, replace the associated digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58).
Exciter A/B: Entered Firmware Upgrade
This alarm indicates that the exciter firmware is being upgraded, and it has inhibited the RF output until complete. The alarm will clear when the upgrade is complete and the exciter reboots. If a firmware upgrade has not been initialized intentionally, try resetting the exciter. If the alarm continues to persist, replace the associated digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58).
Exciter A/B: External Inhibit Active
This alarm indicates that the transmitter controller has inhibited the exciters. Transmitter output power is reduced to 0 W. It is normal to see this alarm when the transmitter is in an RF OFF state. If this alarm occurs while RF is turned on, there should be a corresponding alarm indicated by the transmitter controller. Follow the troubleshooting information for that alarm.
Exciter A/B: FPGA Test Failed
This alarm indicates there was a programming failure with the FPGA. Cycle the power (off, then on) to the transmitter. If the alarm persists, replace the affected digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Page 1-20 Issue 3.3 2017-03-31
Exciter A/B: High B+ Voltage
This alarm indicates that the B+ voltage measured by the exciter exceeded the B+ setpoint by more than 20 V for at least ten (10) seconds. If the rack interface’s High B+ voltage alarm is present, see the troubleshooting action for that alarm. If the rack interface’s alarm is not present, compare the exciter’s B+ voltage meter with the rack’s B+ voltage meter. If they are different, calibrate the exciter’s B+ voltage sample using a multimeter to measure the B+ voltage. If after calibrating the exciter’s B+ voltage sample the meters continue to read the incorrect voltage, replace the associated digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58).
Exciter A/B: High DC Current Foldback
This alarm indicates that the transmitter’s forward power is being reduced because the total dc current being drawn from the B+ power supply, as measured by the transmitter controller’s Total B+ Current meter, exceeded 490A. The alarm will clear once the transmitter’s forward power is no longer being reduced. This alarm indicates the transmitter’s efficiency is much lower than expected, most likely due to a poor load being presented to the RF power modules. Ensure the load impedance being presented to the transmitter by the antenna network is within specification.
Exciter A/B: High Forward Foldback
This alarm occurs when the transmitter’s forward power has been reduced because the average forward power increased above 150% of the transmitter’s rated carrier power. The alarm will clear when the forward power is no longer being reduced. The alarm will generally occur due to excessive modulation. Reduce the level of modulation applied to the transmitter.
Exciter A/B: High Power Lockout
This alarm occurs when the exciter has reduced the power set point due to the currently active high power lockout limit being lower than the active preset’s power set point.
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-21
Exciter A/B: High Temperature Foldback
This alarm indicates either the average temperature of the 10 hottest power modules in the transmitter has exceeded 80 degrees Celsius, or the rectifier heatsink temperature has exceeded 80 degrees Celsius, and the transmitter's forward power is being reduced to maintain temperatures that are below the above thresholds. Once the high temperature condition has cleared, it may take up to an hour for the transmitter to return to its power setpoint, and the alarm will clear when the power is no longer being reduced. Otherwise, pressing the reset button will cause the alarm to clear. Check the transmitter’s output network and verify that the air filter in the back of the cabinet is clean. Verify the temperature of the transmitter building is within specifications.
Exciter A/B: Low B+ Voltage
This alarm occurs when the B+ voltage measured by the exciter drops below 75% of the B+ setpoint for more than 10 seconds. When this alarm is present the exciter will not allow the PDM duty cycle to be increased to compensate for fluctuations in B+. This alarm will clear when the B+ voltage measurement exceeds 81.25% of the B+ setpoint. Generally this alarm indicates that the B+ voltage cannot be increased because the ac voltage is too low. Check the ac mains voltage connected to the transmitter and verify the power transformer is tapped correctly.
Exciter A/B: Low Forward Power 1 (or 2)
This alarm occurs when the output power of the transmitter is below the corresponding user-defined Low Forward Power Threshold (1 or 2). This alarm should occur with other alarms indicating why the transmitter’s output power has dropped. See the troubleshooting information with associated alarms.
Exciter A/B: No B+ Sample
This alarm indicates the exciter’s B+ voltage sample is below 40 V for more than 10 seconds. If there is an associated Low B+ voltage alarm, follow the troubleshooting information for that alarm. If there are no additional alarms and there is a second exciter installed, switch exciters and check if the alarm is present on the other exciter. If the alarm is present on the second exciter, check the cabling between the B+ sampling point and the control/interface PWB. If the connection is OK, replace the control/interface PWB (see “Control/interface PWB replacement” on page 1-63). If the alarm is not present on the second exciter, or there is no second exciter in the transmitter, replace the digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Page 1-22 Issue 3.3 2017-03-31
Exciter A/B: No Carrier Sync Signal Present
This alarm will occur when the transmitter’s Sync Source is set to GPS Sync Card or Combiner and the 10 MHz or 1 kHz synchronization signal is either not present or out of specification. If the Sync Source is set to Combiner, this alarm will cause the transmitter to be inhibited, otherwise this alarm is displayed for information only. If the transmitter’s Sync Source is set to GPS Sync Card, check the connection between the GPS sync PWB and the control/interface PWB. If the connection is OK, replace the GPS sync PWB (see “GPS Sync PWB replacement” on page 1-64). If the alarm persists, replace the associated digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58) or the control/interface PWB (see “Control/interface PWB replacement” on page 1-63). If the transmitter’s Sync Source is set to Combiner, check the connection between the combiner and the control/interface PWB. If the connection looks OK, troubleshoot the combiner’s synchronization signal source.
Exciter A/B: No External 10 MHz
This alarm indicates the transmitter is set to run on an external 10 MHz source, but the exciter has determined the frequency of the external source to be outside of the range 9.9 MHz to 10.1 MHz. This will cause the exciter to revert to using its internal 10 MHz reference until it determines the external 10 MHz is in range. This may also cause an exciter changeover if a backup exciter is installed and automatic changeover is enabled. Check the integrity and signal level of the external 10 MHz source. If the external source is acceptable and the alarm persists, replace the associated digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58).
Exciter A/B: No IBOC Data
This alarm indicates there is no modulation data being provided by the embedded Exgine when the transmitter is running in an IBOC mode of operation. This alarm will trigger the Digital Input Loss alarm. Verify the transmitter is operating in the intended mode. Verify the embedded Exgine is connected to the control/interface PWB and the wiring connections are intact. Verify the Exporter is connected to the Exgine and the Exgine is receiving data from the Exporter. If the alarm persists, replace the associated digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58) or the Exgine PWB (see “Exgine PWB replacement” on page 1-64).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-23
Exciter A/B: Over Current Shutback
This alarm indicates the peak RF current at the output of the transmitter has exceeded the Peak RF Current Limit. This alarm causes the transmitter to immediately shut down its RF output and then recover. If this alarm occurs in conjunction with the Controller’s Fast SWR Shutback alarm, there may be a fault in the transmitter’s external RF output network (i.e, rigid-line, antenna, etc.). If this alarm is occurring without the presence of the Controller’s Fast SWR Shutback alarm, verify the RF current sample, RF voltage sample and the wiring between the sample point and the control/interface PWB is not damaged. If the alarm persists, replace the associated digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58).
Exciter A/B: PLL Unlocked
This alarm indicates the exciter's phase lock loop, which locks the transmitter's carrier frequency to a 10 MHz reference, is no longer locked to the reference. If an external 10 MHz source is being used, the exciter will fall back to using its internal 10 MHz clock. Otherwise, the exciter will inhibit its output. If an external 10 MHz source is being used, check the integrity and signal level of the source. If the alarm persists, replace the associated digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58).
Exciter A/B: Power Below Setpoint
This alarm indicates that the transmitter cannot achieve the desired output power. For the alarm to occur, the power must be at least 10% below the setpoint for more than four (4) seconds, and the exciter is not able to increase the output power because it has reached maximum gain, or the output is being limited by a foldback condition. The alarm is typically accompanied by other alarms. See the troubleshooting action for the associated alarms.
Exciter A/B: Precorrection Inhibited
This alarm indicates that the exciter has disabled its pre-correction compensation. This alarm will occur because the transmitter’s B+ voltage is too low. See the troubleshooting action for the associated low B+ voltage alarm.
Exciter A/B: Protection Mechanisms Disabled
This alarm indicates that the exciter’s protection (shutback, foldback, cutback) has been turned off by the user. The state should only be required when calibrating the transmitter after a frequency change. If this state is not intentional, press the reset button on the associated digital AM exciter PWB. If the alarm persists, replace the associated digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Page 1-24 Issue 3.3 2017-03-31
Exciter A/B: Reboot for Settings Needed
This alarm indicates that the exciter needs to reboot itself to reconfigure its settings. The exciter should automatically reboot itself, however if the alarm persists, press the reset button on the associated digital AM exciter PWB. If the alarm persists, replace the associated digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58).
Exciter A/B: RF Probes Uncalibrated
This alarm indicates that the associated exciter has not been calibrated for the transmitter’s current operating frequency. If the operating frequency has been changed inadvertently, change the frequency back to its original setting. If a frequency change has been performed, recalibrate the exciter per the Nautel provided frequency change procedure.
Exciter A/B: SWR Foldback
This alarm indicates the average reflected power has exceeded the acceptable limit, and the transmitter’s RF output is being reduced to maintain the maximum acceptable reflected power. This alarm normally occurs due to a poor impedance being presented to the transmitter. Inspect the antenna network and check the tuning to ensure the impedance being presented to the transmitter is within specification.
Exciter A/B: SWR Shutback
This alarm indicates the transmitter’s peak reflected power has exceeded the factory set peak reflected limit. This alarm causes the transmitter to immediately shut down its RF output, then recover. If this alarm occurs in conjunction with the Controller’s Fast SWR Shutback alarm, it generally indicates a fault in the transmitter’s external RF output network (e.g., rigid-line, antenna, etc.). If this alarm occurs without the presence of the Controller’s Fast SWR Shutback alarm, verify the RF current sample, RF voltage sample and the wiring between the sample point and the control/interface PWB is not damaged. If the alarm persists, replace the associated digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58).
Exciter A/B: Transmitter Gain Too Low
This alarm occurs when the power gain of the transmitter falls below 63%. This alarm is latching and requires pressing the reset button to clear the alarm. This alarm normally occurs because there is a significant number (greater than 37%) of disabled power modules. Try resetting transmitter alarms to clear power module faults. If the alarm persists, repair or replace RF power modules to clear this alarm (see “RF power module troubleshooting” on page 1-45).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-25
Exciter A/B: Transmitter Type Not Set
This alarm indicates that the associated exciter has not been informed of the type of transmitter it has been installed in. If the affected exciter is a replacement, follow the digital AM exciter PWB replacement procedure to clear the alarm (see “Digital AM exciter PWB replacement” on page 1-58).
Exciter A/B: Unsigned DSP Image
This alarm indicates that the software installed on the exciter is invalid or corrupt and it is inhibiting its output. Try pressing the reset button on the digital AM exciter PWB. If the alarm persists, perform a software upgrade on the transmitter. If the alarm persists, replace the associated digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58).
Exciter A/B: Unsigned FPGA Image
This alarm indicates that the software installed on the exciter is invalid or corrupt. Press the reset button on the digital AM exciter PWB. If the alarm persists, perform a software upgrade on the transmitter. If the alarm persists, replace the associated digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58).
Exgine: AM/FM Mode Mismatched
This alarm indicates the Exporter mode does not match the Exgine mode. Reconfigure the Exporter or Exgine to the correct mode.
Exgine: DPLL Unlocked This alarm occurs when the Exgine phase-locked loop can no longer follow the reference input within 1 ppm of its calibrated value. When using Ethernet sync, this can be triggered by excessive jitter on the Ethernet link or a sudden change in throughput delay of the E2X signal path (e.g., switched IP circuits). This alarm can be temporary, in this case, once the delay has been compensated for and a new equilibrium has been found. This alarm can also be caused by Exgine crystal aging, which can be resolved by recalibrating the Exgine crystal. Ensure the alarm is not temporary and persists for at least one (1) hour. Verify the disciplining input (Exporter clock) is correct. If Exgine crystal aging is suspected, widen the VCXOPPM limits to 5 ppm. Restart the system, operate for 24 hours and ensure the alarm clears. Configure the calibrated VCXO value with the new DAC value as reported from the Exgine status screen. Set the limits back to 0.95 ppm. Restart the system and ensure the alarm is cleared.
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Page 1-26 Issue 3.3 2017-03-31
Exgine: Lost External 10MHz
This alarm is occurs when the Exgine's external 10 MHz signal disappears during an active E2X connection. When this alarm is present, the Exgine will run on the internal oscillator. This can eventually lead to diversity delay drifts and FIFO Overflow or Underflow conditions. If an external 10 MHz signal is being intentionally applied to the Exgine, verify a valid 10 MHz signal is being applied to the Exgine. If an external 10 MHz signal is not being applied to the Exgine, cycle (turn off, then on) ac power to the transmitter. If the alarm persists in either condition, replace the Exgine PWB (see “Exgine PWB replacement” on page 1-64).
Exgine: Network Down This alarm indicates the Exgine has no network connectivity. Verify the Exgine's network settings are configured properly, and the network cable is connected to the correct port on the Exgine PWB.
Exgine: Network Misconfigured
This alarm indicates that invalid Exgine network parameters have been configured. Review and correct all exgine network settings including the IP address, netmask and gateway.
Exgine: System Error This alarm acts as a summary alarm for a number of unexpected Exgine system conditions, such as failed memory checks or internal configuration errors. Contact Nautel Customer Service to troubleshoot this issue.
Module: +15V Fail This alarm indicates the RF power module’s +15 V power supply is below +13.5 V or above +16.5 V. This alarm will cause the RF power module to be immediately disabled. If other alarms are present at the same time this alarm is active, see the troubleshooting action for the associated alarms. Otherwise, replace the RF power module (see “Removing and reinstalling RF power modules” on page 1-47).
Module #: EEPROM Failure
This alarm indicates the RF power module was not able to load valid data from its EEPROM. Try removing and re-inserting the RF power module. If the alarm persists, replace the RF power module (see “Removing and reinstalling RF power modules” on page 1-47).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-27
Module #: External Disable Active
This alarm indicates the PDM cable has been disconnected from the front of the RF power module, which causes the power module to be immediately disabled. If this alarm occurs, reconnect the PDM drive cable associated with that RF power module. If the problem persists, swap the affected RF power module with an operational RF power module’s position. If the fault follows the RF power module, replace the RF power module (see “Removing and reinstalling RF power modules” on page 1-47). If the fault remains with the position, try replacing the PDM drive cable. If the alarm persists, replace the source of the PDM signal (see “PDM Drive Distribution PWB replacement” on page 1-65).
Module #: High B+ Voltage
This alarm indicates the RF power module's B+ meter has exceeded 450 V. If high B+ voltage alarms are present for other system components, see the troubleshooting action for those alarms. If the alarm persists, replace the RF power module (see “Removing and reinstalling RF power modules” on page 1-47).
Module #: High DC Current
This alarm indicates that the RF power module's DC Current meter has exceeded 22 A, or the RF power module's peak DC current has exceeded the threshold applied to the microcontroller's comparator. This alarm will immediately disable the RF power module, and latch it off. If this alarm occurred in conjunction with an Overmodulation alarm, follow the troubleshooting action for that alarm. Otherwise, try resetting the alarms using the AUI. If the alarm persists, replace the RF power module. If the alarm clears, troubleshoot the suspect RF power module for RF FET failures (see “Troubleshooting RF power modules” on page 1-51). If the alarm persists, suspect that the associated RF relay is not opening, or the associated gas discharge tube has activated.
Module #: High PA Voltage
This alarm occurs because of one of two conditions: (1) the PA voltage is at least 10% above the product of the B+ level and the PDM duty cycle; or (2) the PA voltage has exceeded 95% of the B+ value for more than 50 ms. The alarm is latching and will cause the associated RF power module to disable itself. This alarm generally indicates that a modulator FET has failed. See “Troubleshooting RF power modules” on page 1-51 to determine whether to replace the affected RF power module or to repair damaged parts.
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Page 1-28 Issue 3.3 2017-03-31
Module #: High RF Drive This alarm indicates the RF drive duty cycle as measured by the RF power module is above 65%. The affected RF power module is immediately disabled. Try swapping the affected RF power module with an operational RF power module in another position. If the fault follows the RF power module, replace the RF power module (see “Removing an RF power module” on page 1-47). If the fault remains with that position, and is also present on an adjacent power module, try replacing the associated RF Drive cable. If the alarm persists, replace the RF Drive Distribution PWB (see “RF drive distribution PWB replacement” on page 1-66).
Module #: High Temperature
This alarm indicates the power module's measured heatsink temperature has exceeded 90 degrees Celsius. The affected RF power module is immediately disabled. If this alarm occurs with another alarm, troubleshoot that alarm first. Otherwise, see “Troubleshooting RF power modules” on page 1-51 to determine whether to replace the affected RF power module or to repair damaged parts.
Module #: Invalid Thermistor Sample
This alarm indicates there is a problem with the associated RF power module's temperature sample. When this alarm occurs, the associated RF power module will disable itself until the condition is cleared. Inspect R1 on the RF power module, which is soldered to pads G and H of A1, and repair or replace as necessary. Otherwise replace the entire RF power module (see “Removing an RF power module” on page 1-47).
Module #: Low B+ Voltage
This alarm indicates the B+ level of the associated RF power module is below 75% of its nominal value. If the Rack Interface’s Low B+ Voltage alarm is present, follow the troubleshooting action for that alarm. Otherwise, try swapping the affected RF power module with an operational RF power module in another position. If that fault follows the RF power module, replace the RF power module (see “Removing an RF power module” on page 1-47). If the fault remains with that position, check the B+ fuse associated with the RF power module and replace as necessary (see “Module #: Low B+ voltage” on page 1-45).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-29
Module #: Low Fan 1 (or 2) Speed
This alarm occurs if the RF power module is expected to produce RF power and the fan (1 or 2) tachometer drops below 1650 RPM. The affected RF power module is immediately disabled. If only one RF power module reports this alarm, replace the affected RF power module (see “Removing and reinstalling RF power modules” on page 1-47). If multiple RF power modules (above the same fan tray) report this alarm, replace the associated fan or fan tray assembly (see “RF Power Module Fan Tray replacement” on page 1-72). If the alarm persists, replace the rack interface PWB (see “Rack Interface PWB replacement” on page 1-67).
Module #: Low PA Voltage
This alarm indicates the RF power module's PA Voltage meter has dropped 10% below the expected value - determined by multiplying the power module's B+ Voltage meter by the PDM Duty Cycle meter - for more than 500 ms. This alarm can only be triggered if the RF power module PDM Duty Cycle meter is above 10%, causing the affected RF power module to be immediately disabled, and latched off. Try resetting the alarm using the AUI. If the alarm persists, replace the affected RF power module (see “Removing and reinstalling RF power modules” on page 1-47).
Module #: Low RF Drive This alarm indicates the RF drive duty cycle of the affected RF power module is below 35%. The affected RF power module is immediately disabled. Try swapping the affected RF power module with an operational RF power module in another position. If the fault follows the RF power module, replace the RF power module (see “Removing and reinstalling RF power modules” on page 1-47). If the fault remains with that position, and is also present on n adjacent power module, try replacing the associated RF Drive cable. If the alarm persists, replace the RF Drive Distribution PWB (see “RF drive distribution PWB replacement” on page 1-66).
Module #: No Controller Communications
This alarm indicates the RF power module has not received any communication from the rack interface for 10 seconds. Try swapping the affected RF power module with an operational RF power module in another position. If the alarm follows the RF power module, replace the RF power module (see “Removing and reinstalling RF power modules” on page 1-47). If the alarm remains with the position, replace the rack interface PWB (see “Rack Interface PWB replacement” on page 1-67).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Page 1-30 Issue 3.3 2017-03-31
Module #: Overmodulation
This alarm indicates the RF power module's PDM Duty Cycle meter is above 95%. Verify the modulation being applied to the transmitter is not too high. Try swapping the RF power module with an RF power module that is not showing this alarm. If the alarm follows the RF power module, replace the RF power module (see “Removing and reinstalling RF power modules” on page 1-47). If the alarm remains with the original position, try replacing the digital AM exciter PWB (see “Digital AM exciter PWB replacement” on page 1-58) or the control/interface PWB (see “Control/interface PWB replacement” on page 1-63).
Module #: Residual PA Voltage Present
This alarm indicates the PA voltage of the RF power module is higher than expected with either the modulator or the RF amplifier disabled. See “Troubleshooting RF power modules” on page 1-51 to determine whether to replace the affected RF power module or to repair damaged parts, suspecting a failure of one of the FETs.
Module #: RF Drive Fault This alarm indicates that the duty cycle of the RF drive or the dead time between RF drive signals on the associated RF power module is not as expected. This alarm causes the RF power module to be immediately disabled and latched off. Try resetting the alarm using the AUI. If the alarm persists, try swapping the affected RF power module with an operational RF power module in another position. If the fault follows the RF power module, replace the RF power module (see “Removing and reinstalling RF power modules” on page 1-47). If the fault remains with that position, and is also present on an adjacent power module, try replacing the associated RF Drive cable. If the alarm persists, try replacing the RF Drive Distribution PWB (see “RF drive distribution PWB replacement” on page 1-66).
Rack #: AC Phase Loss This alarm occurs when the SCR rectifier assembly detects a significant imbalance in the ac phase voltages. The rectifier will shut down when this condition exists and prevent the transmitter from generating RF. In a safe manner, measure the voltage of each phase of the ac mains. If a phase is missing, check the ac mains fuses. If the ac mains phases are normal and the alarm persists, check the Phase Loss LED on the rectifier. If it is on, replace the SCR rectifier (see “SCR Rectifier Inspection/Replacement” on page 1-69). If the Phase Loss LED is off, replace the rack interface PWB (see “Rack Interface PWB replacement” on page 1-67).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-31
Rack #: Arc Detector 1 This alarm indicates that the transmitter’s arc detector has detected an arc and caused the transmitter to shut back. Due to the sensitivity of the arc detector, it is possible for an external UV source to cause this alarm. Check and remove all external UV sources. If the alarm persists, perform a visual inspection inside the rear of the transmitter for signs of corona or arcing.
Rack #: EEPROM Failure
This alarm indicates that the rack controller has failed to load its configuration from EEPROM. Remove and reapply the ac power to the transmitter. If the alarm persists, replace the rack interface PWB (see “Rack Interface PWB replacement” on page 1-67).
Rack #: High AC Voltage This alarm indicates the rack interface’s Ac Sample meter is above 384 V. The alarm clears when the sample falls below this voltage. It can be caused by an improperly tapped power transformer or a transient on the ac mains. Verify the mains transformer is tapped correctly (see “Connecting transformer taps/load wiring” on page 3-1 in the Installation Manual). If so, monitor the ac mains for transient conditions when this alarm occurs.
Rack #: High B+ Shutback
This alarm occurs when the B+ voltage measured by the rack interface exceeds the set threshold (normally 430 V). This causes the transmitter to disable the B+ power supply until the B+ voltage has decreased an additional 15 volts below the threshold. This alarm normally occurs with extreme changes in transmitter power (i.e., preset changes, interlock open, etc.). If the alarm is occurring continuously, or when unexpected, monitor the B+ with an oscilloscope and determine if the B+ is exceeding the shutback limit. If it is not exceeding the limit, verify the ac mains transformer is tapped correctly (see “Connecting transformer taps/load wiring” on page 3-1 in the Installation Manual).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Page 1-32 Issue 3.3 2017-03-31
Rack #: High B+ Voltage If the B+ voltage is more than 10 V above the B+ voltage set point, the rack interface will attempt to decrease the rectifier’s output. If the rack interface reaches the bottom of its adjustment range and the B+ voltage remains 10 V or more above the B+ voltage setpoint for more than 15 seconds, this alarm will occur. The alarm will clear when the B+ voltage changes to within 10 V of the B+ voltage setpoint, or the B+ power supply is inhibited (by turning RF Off, for example). If the alarm persists while the transmitter is producing RF power, check the ac mains voltages and verify they are within ±10% of the nominal voltage for which the transformer is tapped. Verify the mains transformer is tapped correctly (see “Connecting transformer taps/load wiring” on page 3-1 in the Installation Manual). If the alarm persists, replace the rectifier assembly (see “SCR Rectifier Inspection/Replacement” on page 1-69) or the rack interface PWB (see “Rack Interface PWB replacement” on page 1-67).
Rack #: High Rectifier Temperature
This alarm indicates that the rectifier heatsink temperature has exceeded 100 degrees Celsius. The exciter should reduce the transmitter’s output power before this alarm occurs (see “Exciter: High Temperature Foldback” alarm). The alarm will clear once the rectifier heatsink temperature drops below 99.5 degrees Celsius. The alarm indicates that there is excessive dissipation in the rectifier, likely due to high current draw. This may be due to the secondary voltage of the power transformer being lower than specified. Verify the mains transformer is tapped correctly (see “Connecting transformer taps/load wiring” on page 3-1 in the Installation Manual). If the alarm persists, replace the rectifier assembly (see “SCR Rectifier Inspection/Replacement” on page 1-69).
Rack #: Low AC Voltage This alarm indicates the rack interface’s Ac Sample meter is below 256 V. The alarm clears when the sample rises above this voltage. It is caused by an improperly tapped transformer, or a transient on the ac mains. Verify the mains transformer is tapped correctly (see “Connecting transformer taps/load wiring” on page 3-1 in the Installation Manual). If so, monitor the ac mains for transient conditions when this alarm occurs. See “Rack #: Low AC” on page 1-46.
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-33
Rack #: Low B+ Voltage If the B+ voltage falls to more than 15% below the B+ voltage set point, the rack interface will attempt to turn up the rectifier output voltage. If the rack interface reaches the top of its adjustment range and the B+ voltage remains 25% or more below the B+ voltage setpoint for more than two (2) seconds, this alarm will occur. The alarm will clear when the B+ voltage changes to within 25% of the B+ voltage setpoint, or the B+ power supply is inhibited (by turning RF Off, for example). If the alarm persists while the transmitter is producing RF power, check the main B+ fuse and replace as necessary. If the fuse is OK or the alarm persists, check the ac mains voltages and verify they are within ±10% of the nominal voltage for which the transformer is tapped. Verify the mains transformer is tapped correctly (see “Connecting transformer taps/load wiring” on page 3-1 in the Installation Manual). If the alarm persists, replace the rectifier assembly (see “SCR Rectifier Inspection/Replacement” on page 1-69) or the rack interface PWB (see “Rack Interface PWB replacement” on page 1-67).
Rack #: Power Module # Not Responding
This alarm indicates that the rack interface PWB is not receiving a response from the associated RF power module. Try swapping the affected RF power module with an RF power module in another location. If the alarm follows the RF power module, replace the RF power module (see “Removing and reinstalling RF power modules” on page 1-47).
Rack #: Rectifier Fan 1 (or 2) Fail
This alarm occurs if the speed of one of the SCR rectifier’s cooling fans is below 3000 RPM for longer than 15 seconds. Inspect the affected fan and, if necessary, replace it (see “SCR Rectifier Inspection/Replacement” on page 1-69).
Rack #: +15 V Fail This alarm occurs if the +15 V rail is outside the acceptable range (12 V to 18 V). Disconnect the DC output of both +15 V power supplies, and measure the voltage of each. If the output voltage of either power supply measures outside of the acceptable range, replace the affected power supply. If both power supplies measure within the acceptable range, replace the rack interface PWB (see “Rack Interface PWB replacement” on page 1-67).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Page 1-34 Issue 3.3 2017-03-31
Rack #: +15 V A (or B) Fail
The digital fault reporting output of either +15 V power supply (U3 or U4) is active. If the overall +15 V Fail alarm is active, follow the troubleshooting steps for that alarm. Otherwise, check continuity of the cabling between the associated +15 V power supply and the rack interface PWB. If the cabling looks OK, and all connections are tight, replace the associated +15 V power supply (see “Low Voltage Power Supply Replacement” on page 1-71).
Rack #: -15 V Fail This alarm occurs if the -15 V rail is outside its acceptable range of -12 to -18 V. Suspect a faulty dc-dc converter on the rack interface PWB. Replace the rack interface PWB (see “Rack Interface PWB replacement” on page 1-67).
Rack #: -15 V A (or B) Fail
This alarm occurs if the associated -15 V power supply’s output voltage is outside its acceptable range of -12 to -18 V. Suspect a faulty dc-dc converter on the rack interface PWB. Replace the rack interface PWB (see “Rack Interface PWB replacement” on page 1-67).
Rack #: +30 V Fail This alarm occurs if the +30 V rail has varied outside its acceptable range of 25 to 35 V. Suspect a faulty dc-dc converter on the rack interface PWB. Replace the rack interface PWB (see “Rack Interface PWB replacement” on page 1-67).
Rack #: +30 V A (or B) Fail
This alarm occurs if the associated 30 V power supply’s output voltage is outside its acceptable range of 25 V to 35 V. Suspect a faulty dc-dc converter on the rack interface PWB. Replace the rack interface PWB (see “Rack Interface PWB replacement” on page 1-67).
Rack #: +48 V Fail This alarm occurs if the +48 V rail is outside the acceptable range (44 V to 52 V). Disconnect the DC output of both +48 V power supplies, and measure the voltage of each. If the output voltage of either power supply measures outside of the acceptable range, replace the affected power supply. If both supplies measure within the acceptable range, replace the rack interface PWB (see “Rack Interface PWB replacement” on page 1-67).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-35
Rack #: +48 V A (or B) Fail
If the overall +48 V Fail alarm is active, follow the troubleshooting steps for that alarm. Otherwise, check continuity of the cabling between the associated +48 V power supply and the rack interface PWB. If the cabling looks OK, and all connections are tight, replace the associated +48 V power supply (see “Low Voltage Power Supply Replacement” on page 1-71).
Rack #: +5 V Fail This alarm occurs if the +5 V rail has varied outside its acceptable range of 4 to 6 V. Suspect a faulty dc-dc converter on the rack interface PWB. Replace the rack interface PWB (see “Rack Interface PWB replacement” on page 1-67).
Rack #: +5 V A (or B) Fail
This alarm occurs if the associated +5 V power supply’s output voltage is outside its acceptable range of 4 to 6 V. Suspect a faulty dc-dc converter on the rack interface PWB. Replace the rack interface PWB (see “Rack Interface PWB replacement” on page 1-67).
Alarm (with Prefix) Description and Troubleshooting Action
NX100 Troubleshooting Manual Responding to alarms
Page 1-36 Issue 3.3 2017-03-31
Table 1.2: Troubleshooting Summary Alarms
Summary Alarm Name, AUI (front panel UI)
Description and Triggering Alarms
Audio Loss Summary(Audio Loss Summary)
This summary alarm is triggered if any of the following audio loss related alarms occur:
Exciter A/B alarms:AES1/2 Unlocked Audio Loss No Host AudioAM Input Loss Digital Input Loss No IBOC Data
Controller Fault Summary(Controller Summary)
This summary alarm is triggered if any of the following Controller related alarms occur:
Controller alarms:EEPROM Failure: Config EEPROM Failure: Schedule Host Not RespondingEEPROM Failure: Potentiometers EEPROM Failure: Thresholds Low BatteryEEPROM Failure: Remotes Host Not Booted PDM Latch
Exciter Fault Summary(Exciter Summary)
This summary alarm is triggered if any of the following Exciter related alarms occur:
Controller alarms:Audio Loss Shutdown High RF DriveExciter Changeover Low RF DriveExciter A or B Not Responding
Exciter A/B alarms:AES 1/ 2 Unlocked FPGA Test Failed Power Below SetpointAM Input Loss Low Forward Power 1/2 Precorrection InhibitedAudio Loss No B+ Sample RF Probes Uncalibrated B+ Sample Uncalibrated No Carrier Sync Signal Transmitter Gain Too LowCarrier Sync Unlocked No External 10 MHz Transmitter Type Not SetDigital Input Loss No IBOC Data Unsigned DSP ImageExternal Inhibit Active PLL Unlocked Unsigned FPGA Image
Exgine Fault Summary(Exgine Summary)
This summary alarm is triggered if any of the following Exgine related alarms occur:
Controller alarms:Exgine Not Responding
Exgine alarms:AM/FM Mode Mismatched FIFO Underflow Network Misconfigured DPLL Unlocked Lost External 10 MHz System ErrorFIFO Overflow Network Down
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-37
External Fault Summary(External Summary)
This summary alarm is triggered if any of the following external alarms occur:
Controller alarms:Combiner Interlock Open External PDM Inhibit Interlock Open
Exciter alarms:Audio Overmod Protection
GPS Sync Fault Summary(GPS Sync Summary)
This summary alarm is triggered if any of the following GPS sync related alarms occur:
Controller alarms:GPS Not Responding GPS Receiver Not Responding GPS UnlockedGPS PLL Unlocked GPS Sync No 1-PPS
High Reflected Power Summary(Refl Power Summary)
This summary alarm is triggered if any of the following high reflected power related alarms occur:
Controller alarms:Fast SWR Shutback
Exciter alarms:SWR Foldback SWR Shutback
High Temperature Summary(High Temp Summary)
This summary alarm is triggered if any of the following temperature related alarms occur:
Exciter alarms:High Temperature Foldback
Rack alarms:High Rectifier Temperature
Table 1.2: Troubleshooting Summary Alarms
Summary Alarm Name, AUI (front panel UI)
Description and Triggering Alarms
NX100 Troubleshooting Manual Responding to alarms
Page 1-38 Issue 3.3 2017-03-31
Maintenance Fault Summary(Maintenance Summary)
This summary alarm is triggered if any of the following maintenance related alarms occur:
Controller alarms:EEPROM Failure: Config Exciter Changeover High RF Drive EEPROM Failure: Potentiometers Exgine Not Responding Host Not Booted EEPROM Failure: Remotes GPS PLL Unlocked Host Not RespondingEEPROM Failure: Schedule GPS Not Responding Low Battery EEPROM Failure: Thresholds GPS Sync No 1-PPS Low RF Drive Exciter A or B Not Responding GPS Unlocked Rack1 Not Responding GPS Receiver Not Responding
Exciter alarms:B+ Sample Uncalibrated High B+ Voltage No Carrier Sync SignalCarrier Sync Unlocked Low B+ Voltage No External 10MHzExternal Inhibit Active No B+ Sample Precorrection Inhibited
Exgine alarms:AM/FM Mode Mismatched FIFO Underflow Network MisconfiguredDPLL Unlocked Lost External 10MHz System ErrorFIFO Overflow Network Down
Module alarms:External Disable Active High Temperature No Controller CommsFront Panel Inhibit Invalid Thermistor Sample OvermodulationHigh B+ Voltage Low B+ Voltage Residual PA VoltageHigh DC Current Low Fan 1/2 Speed RF Drive FaultHigh PA Voltage Low PA Voltage +15V FailHigh RF Drive Low RF Drive
Rack alarms:+5V Fail +30V A/B Fail High B+ Voltage+5V A/B Fail +48V Fail High Rectifier Temp+15V Fail +48V A/B Fail Low AC Voltage +15V A/B Fail AC Phase Loss Low B+ Voltage -15V Fail EEPROM Failure PM 1-40 Not Responding-15V A/B Fail High AC Voltage Rectifier Fan 1/2 Fail+30V Fail
Table 1.2: Troubleshooting Summary Alarms
Summary Alarm Name, AUI (front panel UI)
Description and Triggering Alarms
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-39
Off Air Summary(Off Air Summary)
This summary alarm is triggered if any of the following off-air related alarms occur:
Controller alarms:Arc Shutback External PDM Inhibit Interlock OpenAudio Loss Shutdown Fast SWR Shutback PDM LatchCombiner Interlock Open
Exciter alarms:FPGA Test Failed RF Probes Uncalibrated Transmitter Type Not Set
Over-Current Shutback SWR Shutback Unsigned DSP Image
PLL Unlocked Transmitter Gain Too Low Unsigned FPGA Image
Rack alarms:Arc Detector 1 High B+ Shutback Low B+ Shutdown
Output Network Fault Summary(O/P Network Summary)
This summary alarm is triggered if any of the following output network related alarms occur:
Controller alarms:Arc Shutback Fast SWR Shutback
Exciter alarms:
Cutback Over-Current Shutback SWR Shutback
High Forward Foldback SWR Foldback
Rack alarms:Arc Detector 1
Power Module Fault Summary(PM Summary)
This summary alarm is triggered if any of the following power module related alarms occur:
Module alarms:EEPROM Failure High Temperature No Controller CommsExternal Disable Active Invalid Thermistor Sample OvermodulationFront Panel Inhibit Low B+ Voltage Residual PA VoltageHigh B+ Voltage Low Fan 1/2 Speed RF Drive FaultHigh DC Current Low PA Voltage +15V FailHigh PA Voltage Low RF DriveHigh RF Drive
Rack alarms:PM 1-40 Not Responding
Table 1.2: Troubleshooting Summary Alarms
Summary Alarm Name, AUI (front panel UI)
Description and Triggering Alarms
NX100 Troubleshooting Manual Responding to alarms
Page 1-40 Issue 3.3 2017-03-31
Power Supply Fault Summary(PS Summary)
This summary alarm is triggered if any of the following power supply related alarms occur:
Exciter alarms:High B+ Voltage High DC Curr Foldback Low B+ Voltage
Rack alarms:AC Phase Loss Low B+ Shutdown +30V FailHigh AC Voltage Rectifier Fan 1/2 Fail +30V A/B FailHigh B+ Shutback +5V Fail +48V FailHigh B+ Voltage +5V A/B Fail +48V A/B FailHigh DC Curr Foldback +15V Fail -15V FailHigh Rectifier Temp +15V A/B Fail -15V A/B FailLow AC Voltage
Rack Fault Summary(Rack Summary)
This summary alarm is triggered if any of the following rack related alarms occur:
Controller alarms:Rack1 Not Responding
Rack alarms:EEPROM Failure
Reduced Power Summary(Power Low Summary)
This summary alarm is triggered if any of the following reduced power related alarms occur:
Exciter alarms:Audio Overmod Protection High Forward Foldback Power Below SetpointCutback High Temp Foldback SWR FoldbackHigh DC Current Foldback Low Forward Power 1/2
Table 1.2: Troubleshooting Summary Alarms
Summary Alarm Name, AUI (front panel UI)
Description and Triggering Alarms
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-41
Table 1.3: Module Replacement Procedures
Module Replacement Procedure
RF Power Module See page 1-47
Power Amplifier MOSFET See page 1-54
Modulator MOSFET See page 1-56
Remote Interface PWB See page 1-58
Digital AM Exciter PWB See page 1-58
Control/Interface PWB See page 1-63
GPS Sync PWB See page 1-64
Exgine PWB See page 1-64
PDM Distribution PWB See page 1-65
RF Drive Distribution PWB See page 1-66
Rack Interface PWB See page 1-67
SCR Rectifier Assembly See page 1-69
Low Voltage Power Supplies See page 1-71
RF Power Module Fan Tray See page 1-72
Single Board Computer (SBC) See page 1-73
Arc Detector UV Sensor See page 1-76
NX100 Troubleshooting Manual Responding to alarms
Page 1-42 Issue 3.3 2017-03-31
Responding to alarms
Controller: External PDM Inhibit
A Controller: External PDM Inhibit alarm indicates that an external PDM inhibit command is present. The alarm could be caused by an short circuit in the external wiring path to the control/interface PWB or a fault in the switching circuitry on the control/interface PWB.
The external PDM inhibit is wired to the control/interface PWB. The circuit can be configured as single-ended (internal power supply) or differential (external power supply), using user-provided shorting jumpers on terminal block TB1 (see “External PDM inhibit” on page 8-4 of the Pre-Installation Manual).
1. Gain access to the control/exciter panel (A11) (see Figure 1.6 on page 1-57) by opening thecontrol cabinet’s front door.
2. Connect a digital multimeter (set to measure dc) between TB1-6 and TB1-7 of the control/interface PWB.
3. If the measured dc voltage is greater than 10 V between TB1-6 and TB1-7, there is a shortcircuit in the external PDM inhibit circuit. Check for external causes.
4. If the measured dc voltage is less than 10 V between TB1-6 and TB1-7, there is no externalPDM inhibit command. Suspect the control/interface PWB and if necessary, replace it (see“Control/interface PWB replacement” on page 1-63).
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-43
Controller: Interlock Open
A Controller: Interlock Open alarm indicates an external interlock is open. The transmitter’s RF output will be inhibited.
The external interlock input is wired to the control/interface PWB by the end user and triggered by the conditions that they set (e.g., the state of the door to the transmitter room). The circuit can be configured as single-ended (internal power supply) or differential (external power supply), using user-provided shorting jumpers on terminal block TB1 (see “External system interlock” on page 8-2 of the Pre-Installation Manual).
1. Gain access to the control/exciter panel (A11) (see Figure 1.6 on page 1-57) by opening thecontrol cabinet’s front door.
2. Connect a digital multimeter (set to measure dc) between TB1-2 and TB1-3 of the control/interface PWB.
3. If the measured dc voltage is less than 10 V between TB1-2 and TB1-3, the external interlockcircuit is open (normally caused by an open interlock switch). Check for external causes.
4. If the measured dc voltage is greater than 10 V between TB1-2 and TB1-3, the externalinterlock circuit is intact and the probable cause of the alarm is a defective monitoringcircuit. Suspect the control/interface PWB and if necessary, replace it (see “Control/interface PWB replacement” on page 1-63).
NX100 Troubleshooting Manual Responding to alarms
Page 1-44 Issue 3.3 2017-03-31
Module faults
There are many alarms on the AUI, prefixed by the text Module, that indicate faults related to one or more of the 40 RF power modules in a cabinet. The number that appears after Module or PM, identifies the serial identification of the affected RF power module. These serial numbers are labeled on the front panel of each RF power module.
1. Check the forward power reading on the AUI. If it is less than the preset level, one or more RF power modules are defective. Proceed to “RF power module fault validation”.
2. If the forward power reading in Step 1 is normal press the Transmitter Status button on the AUI to check for other alarms that may have triggered the RF power module alarm.
RF power module fault validation
Each RF power module has a multi-colour LED on its front panel, which can help in identifying a fault and allowing you to determine whether remedial action is required now or later.
Identify and isolate a defective RF power module, and verify the nature of the defect by checking the LEDs on the RF power modules’ front panels. Note which RF power module is not operating normally and producing RF power (i.e., LED is not solid green). Record which RF power modules are displaying an alarm and the state of its LED (see below).
– amber, off: module is RF off– solid red: module has a non-latching alarm– flashing red, then green: module is producing RF, but has an alarm– long red, short amber: module has a latching alarm– long red, short off: module has no valid serial number– short red, long off: module has no valid serial address on the internal bus– long amber, short green: module is producing RF, but no serial communications– long amber, short red: module is not producing RF and no serial communications
Except in the case of a High DC Current, High PA Volts and Residual PA Volts alarm, attempt to reset an RF power module by disconnecting and reconnecting the RJ45 plug in the front of the module. If you cannot reset the front panel LED alarm, see “RF power module troubleshooting”.
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-45
RF power module troubleshooting
Refer to “Removing and reinstalling RF power modules” on page 1-47 for removal and installation instructions and then refer to “Troubleshooting RF power modules” on page 1-51 for detailed troubleshooting information.
Module #: Low B+ voltage
A Module # Low B+ Voltage alarm is triggered when the B+ voltage is at least 10% below its expected level.
1. If all RF power modules are reporting this alarm, it is very likely there is also a Rack #: Low B+ alarm. If so, the fault is not likely associated with an RF power module; proceed to “Rack #: Low AC” on page 1-46 for further troubleshooting information. If not, proceed to Step 2.
2. Check and, if necessary, replace the fuse on the power module interface PWB for the affected RF power module. Each power module interface PWB serves four RF power modules and therefore has four B+ fuses (F1 through F4). Refer to Figures MD-1 and MD-2 in the Mechanical Drawings section of this manual to locate the associated power module interface PWB and then refer to Figure MD-4 or MD-5 to locate the specific fuse.
3. Check and, if necessary, replace the affected RF power module. See “Troubleshooting RF power modules” on page 1-51.
NOTE: A defective RF power module can be removed for repair, without turning off the transmitter, as described in “Removing an RF power module” on page 1-47. The transmitter can be operated at a reduced output power level with an RF power module removed.
NX100 Troubleshooting Manual Responding to alarms
Page 1-46 Issue 3.3 2017-03-31
Rack #: Low AC
A Rack # (1-8): Low AC alarm is triggered when the ac input voltage is at least 45% below its expected level. Recovery from this alarm is automatic when the ac voltage rises to an acceptable level.
If the transmitter does not automatically recover from this alarm, the low ac voltage is normally caused by low ac mains voltage or improper primary taps on the power transformer. Troubleshoot a Rack #: Low AC alarm as follows.
1. Measure the ac input voltage and verify the power transformer is tapped as shown in Section 3, “Connecting transformer taps/load wiring” on page 3-1 of the NX100 Installation Manual. If necessary, turn off the transmitter, lock out the ac input voltage and retap the power transformer for the next highest voltage.
2. If the transformer taps are correct, the monitoring circuit is suspect. Contact Nautel for troubleshooting information.
NOTE: An NX100 transmitter has only one rack (or cabinet) and will only display Rack 1.
WARNING:
Lethal voltages exist in the power supply compartment of the
transmitter. Use extreme caution in this area.
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-47
Removing and reinstalling RF power modules
Removing an RF power module
1. Confirm the location of the RF power module that is being removed. Note the alarm text includes a Module serial address that is also identified on the front panel of each RF power module. See Figure 1.3 on page 1-50 to determine the location for a given RF power module (A20 through A59).
2. If possible, turn RF Off and proceed to Step 4. Otherwise, if it is necessary to remove a power module while “on air” you must confirm the RF power module to be removed is disabled. From the AUI, go to the Meters page and click on the Modules - Rack information (i) button. The Power Module status screen (see Figure 1.2 on page 1-48) should appear. Click on the associated RF power module’s Front Panel Inhibit icon. The icon colour should change from green to red, indicating the RF power module is disabled.
3. When the RF power module is disabled, you should hear a relay (click) in the back of the cabinet drop out (de-energize). Proceed to Step 4 if you hear the relay click. If you do not hear the relay de-energize (click), DO NOT CONTINUE to Step 4. Re-enable the module and press the Reset button at the bottom of the page to clear any possible latched alarms while listening for the relay attempt to open. Try re-enabling and disabling a few times while trying to hear the relay de-energize. If you do not hear the sound, DO NOT remove the RF power module while the transmitter is on-air. Turn RF Off, remove the RF power module following Step 4 through Step 6 and replace the relay before turning RF On.
4. Disconnect the RJ45 cable from the front of the RF power module.
5. Remove both mounting screws from the RF power module’s front panel.
6. Grasp the handle on the front of the RF power module and carefully pull the RF power module out of the transmitter.
WARNING:
failure to follow the rf power module removal instructions may
result in injury to the operator and serious physical damage to the rf
power module and transmitter.
NX100 Troubleshooting Manual Responding to alarms
Page 1-48 Issue 3.3 2017-03-31
Figure 1.2: Disabling/Enabling an RF Power Module
Green indicates enabled. Click to disable (will turn red);click again to re-enable (will turn green)
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-49
Installing an RF power module
1. If possible, turn off the transmitter before installing an RF power module. Grasp the handle on the front of the RF power module and insert it into the transmitter.
2. Carefully push the RF power module into place so that its card-edge connector mates with the transmitter.
3. Install both mounting screws in the RF power module’s front panel.
4. Connect the RJ45 cable to the front of the RF power module. If you are installing the RF power module while the transmitter is “on-air”, click on the associated RF power module’s Front Panel Inhibit icon as shown in Figure 1.2. The icon colour should change from red to green, indicating the RF power module is enabled. You should hear a relay in the back of the transmitter pick up (energize).
5. Upgrade the subsystem software using the AUI’s Upgrade Software page under the System Settings menu. See the NX100 Operations and Maintenance Manual for detailed instructions.
NX100 Troubleshooting Manual Responding to alarms
Page 1-50 Issue 3.3 2017-03-31
Figure 1.3: RF Power Module Locations
RF PowerModules
Front Door Removed for
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-51
Troubleshooting RF power modules
Maintenance philosophy
Recommended troubleshooting procedures for RF power modules are limited to “go” or “no-go” resistance or diode measurements on the module’s power semi-conductors and replacement procedures for these devices.
Special Tools and Test Equipment
The following test equipment and cables are required to troubleshoot an RF power module.
• A digital multimeter with resistance and diode settings.
• A torque screwdriver with a torque range of 0.0 to 2.26 N-m (0 - 20 in.-lbs). Required for installing MOSFET attaching hardware.
• A soldering iron and desoldering tool.
• An NX100 spares kit (contains replacement semi-conductors).
Electrostatic Precautions
The RF power module contains semiconductor devices that are susceptible to damage from electrostatic discharge. Be sure to follow the electrostatic precautions in “Electrostatic protection” on page 1-3 at all times.
Preparation for Troubleshooting
1. Follow the procedure in “Removing an RF power module” on page 1-47 to remove the RF power module from the transmitter.
2. Place the RF power module on a suitable work surface.
3. Perform the resistance measurements on the modulator and power amplifier MOSFETs as described in “Resistance measurements” on page 1-52.
4. Perform the diode checks on the free-wheel diodes as described in “Power Amplifier FET replacement” on page 1-54
NX100 Troubleshooting Manual Responding to alarms
Page 1-52 Issue 3.3 2017-03-31
Resistance measurements
Complete the following resistance measurements for each suspect RF power module. See Figure 1.4 on page 1-53 to identify the power MOSFETs on the RF power module.
1. Remove fuse F1 from its holder and measure its resistance using a digital multimeter. A blown fuse will measure an open circuit. If the fuse is OK, return it to its holder.
2. For each power amplifier MOSFET (Q7 through Q10) and each modulator MOSFET (Q11, Q12 and Q13), use a digital multimeter to make the following resistance measurements. Note that Q7 through Q10 have screw-head terminals and Q11 through Q13 have solder pads (see Figure 1.4 on page 1-53):
• Check for 1,000 between the gate and source.
• Check for an open circuit between the gate and drain.
3. If either measurement in Step 2 is not satisfactory, replace the affected power amplifier MOSFET (see “Power Amplifier FET replacement”) or modulator MOSFET (see “Modulator FET replacement” on page 1-56).
4. If both measurements in Step 2 are satisfactory, replace the entire RF power module (see “Removing and reinstalling RF power modules” on page 1-47).
Diode checks
Complete the following diode checks for each suspect RF power module. See Figure 1.4 on page 1-53 to identify the free-wheel diode on the RF power module.
1. Use a digital multimeter (on its diode setting) to check free-wheel diode CR8, noting the anode (A) and cathode (K) markings (see Figure 1.4 on page 1-53):
2. If the diode is not satisfactory, replace the it by desoldering its surface-mount leads and case from the PWB. Locate a replacement diode (Nautel Part # QM54) in the spares kit, if purchased, and solder it to the PWB, noting correct orientation.
3. If the diode is satisfactory, proceed to MOSFET replacement, as necessary, or replace the entire RF power module (see “Removing and reinstalling RF power modules” on page 1-47).
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-53
Figure 1.4: RF Power Module MOSFET and Diode Location
Some parts removedfor clarity
G D S G D S
G D S
Q13 Q12
Q11
Q7Q8Q9Q10
Partial View of NAPA34 Modulator/PowerAmplifier PWB
Modulator MOSFETs
Power AmplifierMOSFETs
A
CR8
K
Freewheel diode
NX100 Troubleshooting Manual Responding to alarms
Page 1-54 Issue 3.3 2017-03-31
Power Amplifier FET replacement
See Figure 1.5 on page 1-55.
1. Remove five M3 screws that secure the modulator/power amplifier PWB to the chassis.
2. Remove 16 M4 screws (four for each MOSFET) that secure the PWB to the MOSFETs.
3. Swing the PWB away from the chassis and remove two M4 screws that secure the defective MOSFET to the chassis. If necessary, remove the screw securing the thermistor wire to the PWB.
4. Discard the defective MOSFET and its associated thermal pad (between MOSFET and chassis).
5. Ensure the surface of the chassis/heat sink is clean and free of debris.
6. Obtain a replacement MOSFET (Nautel Part # QR68) and a new thermal pad (Nautel Part # HAK55) from the spares kit, if purchased, and install them on the RF power module chassis using the two M4 screws removed in step 3. Torque hardware to 12 in-lbs (1.3 N-m).
7. Replace any other defective MOSFETs and then re-install the PWB to the chassis by reversing the instructions in steps 1 through 3. Torque the 16 MOSFET screws (four for each MOSFET) to a maximum of 10 in-lbs (1.1 N-m).
8. Return the power module to service (see “Installing an RF power module” on page 1-49).
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-55
Figure 1.5: Power Amplifier FET Replacement
NX100 Troubleshooting Manual Responding to alarms
Page 1-56 Issue 3.3 2017-03-31
Modulator FET replacement
1. Remove five M3 screws that secure the modulator/power amplifier PWB to the chassis.
2. Remove 16 M4 screws (four for each MOSFET) that secure the PWB to the MOSFETs.
3. Desolder the gate, drain and source connections that secure the defective MOSFET to the PWB (see Figure 1.4 on page 1-53). Also desolder the two connections that secure the defective MOSFET’s heatsink to the PWB. Remove the heat sink and MOSFET from the PWB.
4. Remove the heatsink clip that holds the MOSFET on its heat sink. Remove and discard the defective MOSFET.
5. Clean the surface of the heat sink and make sure its is free of debris.
6. Apply a thin film of thermal compound to the heatsink.
7. Obtain a replacement MOSFET (Nautel Part # QR75) from the spares kit, if purchased, and install it on the heat sink using the alignment post on the heat sink as an installation aid. Reinstall the heat sink clip removed in Step 4.
8. Replace any other defective MOSFETs and then re-install the heatsink on the PWB, first by soldering the two heatsink connections and then by soldering the MOSFET’s gate, drain and source leads.
9. Reinstall the PWB to the chassis by reversing the instructions in steps 1 and 2. Torque the 16 power amplifier MOSFET screws (four for each MOSFET) to a maximum of 10 in-lbs (1.1 N-m) .
10. Return the power module to service (see “Installing an RF power module” on page 1-49).
CAUTION: The heat sinks of modulator MOSFETs are coated with a film of thermal compound. Use care to ensure the film does not become contaminated with foreign particles.
When installing a replacement MOSFET, visually inspect the mating surfaces of the MOSFET and its heat sink. Ensure the heat sink surface is coated with a thin film of thermal compound. Ensure foreign particles that may affect thermal transfer are not embedded in the compound.
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-57
Control/exciter panel board removal/replacement
The control/exciter panel (A11, see Figure 1.6) contains the control/interface PWB (A11A1), two digital AM exciter PWBs [A (A11A2) and B (A11A3)], remote interface PWB (A11A4), optional GPS sync PWB (A11A5) and optional Exgine PWB (A11A7). The control/interface PWB physically interconnects with both digital AM exciter PWBs and the remote interface PWB.
Figure 1.6: NX100 Control/Exciter Panel
NOTE: To remove the control/interface PWB, you must first remove either the remote interface PWB or both digital AM exciter PWBs.
A1 A4
A2 A3A7
Control/Interface PWB
RemoteInterface PWB
Exgine PWB(optional)
Digital AMExciter PWB (A)
Digital AMExciter PWB (B)
A5
GPS Sync PWB(optional)
NX100 Troubleshooting Manual Responding to alarms
Page 1-58 Issue 3.3 2017-03-31
Remote interface PWB replacement
1. Remove and retain six sets of mounting hardware from the remote interface PWB (A11A4).
2. Pull the remote interface PWB away from the control/interface PWB (A11A1). It may be helpful to gently pry the connector loose with a screwdriver.
3. Set the STATUS/ALARM jumpers (E1 through E16) on the new remote interface PWB to the same positions as the defective PWB.
4. Use an indelible marker to identify the LED and switch labels on the new remote interface PWB to match the labels on the defective PWB.
5. Install the new remote interface PWB by reversing Step 1 and Step 2.
6. Reconnect all interface wiring to the new remote interface PWB.
Digital AM exciter PWB replacement
1. Set the transmitter to its RF Off state. Open the front door to gain access to the exciter panel (see Figure 1.6 on page 1-57).
2. Connect a straight-through serial (DB9) cable between the defective digital AM exciter PWB’s RS-232 connector (9-pin D-sub J3, see Figure 1.7 on page 1-58) and the serial port on a PC. See Figure 1.6 on page 1-57 to locate the digital AM exciter PWB(s) (A11A2 and A11A3 if purchased).
Figure 1.7: Part of Digital AM Exciter PWB - Location of RS-232 Connector J3
3. On MODE program header E1 (see Figure 1.7), install the shorting jumper in the PROGRAM position (shorting pins 1 and 2). Press RESET switch S1, located directly above E1.
C50
C48C34
L10
C39
C49
C46
R57
C36
R51
R60
R58
R75R74
U22
C61
R82
R98C69 C77
R96R95
C37
C35
C40
TP3
R59
U17
U18
L12
C62
C60
R83
TP9
E11
R71
R78
Y3
R97
TP4
R50
R52 J5
1
TP7C45U26
U36
R72R73
C63C42
U14 S1
U34
1
J3
+2.5V
GND
GND
+1.2V
RS-232
BOOTLOADER
NORMAL
MODE
RESET
PROGRAM
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-59
4. Obtain the NCode Uploader application from Nautel’s FTP site:
ftp://www3.nautel.com/Utilities/NCodeUploader/
5. From the PC, run the NCode Uploader application (see Figure 1.8). Click Settings and ensure the COM port reflects the port that the serial cable is connected to on your PC.
Figure 1.8: NCode Uploader Menu
NX100 Troubleshooting Manual Responding to alarms
Page 1-60 Issue 3.3 2017-03-31
Figure 1.9: Upload DSP Firmware Menu
6. Click the Upload DSP Firmware button (see Figure 1.8 on page 1-59). The menu shown in Figure 1.9 should appear, along with the Connected to DSP successfully! prompt. Click OK.
7. Once connected, click the Read Exciter Configuration button. Select Save file to disk and click OK (see Figure 1.10 on page 1-61) to save the current calibration data. Browse to a desired location to save the file.
8. If the defective exciter does not allow the previous steps to be performed, try using the operational exciter to save the required calibration data. In this case, repeat Step 2 through Step 7 for the operational exciter’s digital AM exciter PWB. If there is no operational exciter, contact Nautel for the required calibration data.
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-61
Figure 1.10: Upload DSP Firmware Menu - Select an Option
9. Turn off (disable) the ac power for the transmitter at the source.
10. Remove and retain four sets of mounting hardware from the digital AM exciter PWB being replaced (A11A2 or A11A3).
11. Pull the digital AM exciter PWB away from the control/interface PWB (A11A1). It may be helpful to gently pry the connector loose with a screwdriver.
12. Obtain a replacement digital AM exciter PWB (Nautel Part # NAPE78A/01).
13. Install the new digital AM exciter PWB by reversing Step 10 and Step 11.
14. Turn on (enable) the ac power source.
15. Connect a straight-through serial (DB9) cable between the replacement digital AM exciter PWB’s RS-232 connector (9-pin D-sub J3, see Figure 1.7 on page 1-58) and the serial port on a PC.
NX100 Troubleshooting Manual Responding to alarms
Page 1-62 Issue 3.3 2017-03-31
16. On the digital AM exciter PWB’s MODE program header E1 (see Figure 1.7), install the shorting jumper in the PROGRAM position (shorting pins 1 and 2). Press RESET switch S1, located directly above E1.
17. Once connected, use the PC to browse to the configuration file saved in Step 7 by clicking the Browse button next to the “Please Select a Exciter Configuration file:” field (see Figure 1.11 on page 1-62).
Figure 1.11: Upload DSP Firmware Menu - Browse for configuration file
18. Click the Program Exciter Configuration checkbox (see Figure 1.11 on page 1-62) so that the box contains a checkmark. Ensure the Program Bootloader, Program DSP Main Code and Program FPGA Configuration checkboxes are not checked. Click the Program New Firmware button.
19. On the digital AM exciter PWB’s MODE program header E1 (see Figure 1.7), return the shorting jumper to the NORMAL position (shorting pins 2 and 3). Press RESET switch S1, located directly above E1.
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-63
20. On the front panel AUI, reset any active alarms.
21. Upgrade the subsystem software using the AUI’s Upgrade Software page under the System Settings menu by running an upgrade using the existing .tgz file already installed on the transmitter. See the NX100 Operations and Maintenance Manual for detailed instructions.
22. Set the transmitter to its RF On state. Ensure any previous present alarms have cleared.
Control/interface PWB replacement
1. Record the following information (as a minimum) from the front panel AUI:
– Presets page: record settings for all desired presets– Scheduler page: record Rules and Daily Events information– Factory Settings page: record information in the RF Symmetry and Transmitter Type
menus– System Settings page: record all information in the Exciter Clock Calibration and
Power Lockout menus– User Settings page: record all information in the Network Setup menu– Remote I/O page: record all information for the user-defined remote Inputs and
Outputs, including Channel and Control settings– Changeover page: record all information
2. Set the transmitter to its RF Off state. Turn off (disable or lock out) the ac power at the source. Open the front door to gain access to the exciter panel (see Figure 1.6 on page 1-57).
3. Disconnect all cables attached to the control/interface PWB (A11A1), taking note of the connector labels on the cables and the PWB.
4. Remove and retain the two screws securing the connector bracket in the upper, left portion of the control/interface PWB.
5. Remove either the remote interface PWB (A11A4) or both digital AM exciter PWBs (A11A2 and A11A3), whichever is easier. It may be helpful to gently pry the connectors loose with a screwdriver.
6. Remove and retain 13 sets of mounting hardware from the control/interface PWB (A11A1).
7. Obtain a replacement control/interface PWB (Nautel Part # NAPC160B/01).
8. Set the COMB CONT INTLK (E1) and REMOTE SUPPLY (E3) jumpers on the replacement PWB to the same positions as the defective PWB.
NX100 Troubleshooting Manual Responding to alarms
Page 1-64 Issue 3.3 2017-03-31
9. Install the new control/interface PWB by reversing Step 3 through Step 6. For connector mating assistance, refer to the connector mating tables in Section 3, “Wiring/connector lists” on page 3-1.
10. Re-enter all the AUI information recorded in Step 1.
11. Set the time using the front panel AUI’s Factory Settings - Time Setup page.
12. Measure the VSWR threshold voltage on the control/interface PWB at R73-LHS. Adjust VSWR THRESHOLD potentiometer R78 until the multimeter reading is 1.5 Vdc.
13. Upgrade the subsystem software using the AUI’s Upgrade Software page under the SystemSettings menu. See the NX100 Operations and Maintenance Manual for detailed instructions.
GPS Sync PWB replacement
1. Remove and retain four sets of mounting hardware from the GPS sync PWB being replaced(A11A5).
2. Set the jumpers on the replacement PWB to the same positions as the defective PWB.
3. Install the new GPS sync PWB by reversing Step 1 and Step 2.
Exgine PWB replacement
1. Remove and retain four sets of mounting hardware from the exgine PWB (A11A7).
2. Set the jumpers on the replacement PWB to the same positions as the defective PWB.
3. Install the new exgine PWB by reversing Step 1 and Step 2.
NOTE: Remove the jack screws from 9-pin D-sub connector J1 on the new GPS sync PWB before installing it.
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-65
PDM Drive Distribution PWB replacement
See Figure 1.12.
Figure 1.12: Location of PDM Drive Distribution PWB
1. Open the front door.
2. Disconnect all cables attached to the PDM drive distribution PWB, taking note of the connector labels on the cables and the PWB.
3. Remove and save six sets of mounting hardware.
4. Remove the defective PWB from the transmitter.
5. Reverse Step 1 through Step 4 to install the new PWB.
WARNING:
Lethal voltages exist inside the transmitter when the power is turned
on. Turn off the power at the source and verify the 40 bright green
LEDs on the power module interface PWBs are off before removing
any connections or PWBs.
PDM DriveDistributionPWB
FRONT OFCABINET
Front DoorRemoved forClarity
NX100 Troubleshooting Manual Responding to alarms
Page 1-66 Issue 3.3 2017-03-31
RF drive distribution PWB replacement
See Figure 1.13.
Figure 1.13: Location of RF Drive Distribution and Rack Interface PWBs
1. Turn off the ac power at the source. Open the back door and verify the green LEDs on the power module interface PWBs are off, indicating the capacitors are discharged. For additional safety, measure the dc voltage across the + and - terminals of any of the large, electrolytic capacitors on the floor of the cabinet. There should be little or no voltage.
2. Disconnect all cables attached to the RF drive distribution PWB, taking note of the connector labels on the cables and the PWB.
3. Carefully remove and save seven sets of mounting hardware.
4. Remove the PWB from the transmitter.
5. Reverse Step 1 through Step 4 to reinstall the PWB.
WARNING:
Lethal voltages exist inside the transmitter when the power is turned
on. Turn off the power at the source and verify the 40 bright green
LEDs on the power module interface PWBs are off before removing
any connections or PWBs.
PWBs locatedon undersideof this chassis
Back Door and Side PanelRemoved for Clarity
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-67
Rack Interface PWB replacement
See Figure 1.13 on page 1-66.
1. Turn off the ac power at the source. Open the back door and verify the green LEDs on the power module interface PWBs are off, indicating the capacitors are discharged. For additional safety, measure the dc voltage across the + and - terminals of any of the large, electrolytic capacitors on the floor of the cabinet. There should be little or no voltage.
2. Remove the interconnecting RF drive distribution PWB (see“RF drive distribution PWB replacement” on page 1-66). Gently pry the connectors loose with a screwdriver.
3. Disconnect all cables attached to the rack interface PWB, taking note of the connector labels on the cables and the PWB.
4. Carefully remove and retain six sets of mounting hardware.
5. Remove the rack interface PWB from the transmitter.
6. Obtain a replacement rack interface PWB (Nautel Part # NAPI152A) and set DIP switch S1 as follows.
WARNING:
Lethal voltages exist inside the transmitter when the power is turned
on. Turn off the power at the source and verify the 40 bright green
LEDs on the power module interface PWBs are off before removing
any connections or PWBs.
S1 Position A15 Setting
8 CLOSED
7 CLOSED
6 OPEN
5 CLOSED
4 CLOSED
3 CLOSED
2 OPEN
1 OPEN
NX100 Troubleshooting Manual Responding to alarms
Page 1-68 Issue 3.3 2017-03-31
7. Reverse Step 1 through Step 5 to reinstall the PWB.
8. If you are replacing the Controller’s rack interface PWB, disengage all RF power modules in the transmitter before turning on the ac power (see “Removing and reinstalling RF power modules” on page 1-47).
9. One at a time, reinstall each RF power module. The LED sequence on the front panel of each module should change to solid red. Reconnect each RF power module’s PDM cable; the LED sequence should change to flashing amber.
10. Upgrade the subsystem software using the AUI’s Upgrade Software page under the System Settings menu. See the NX100 Operations and Maintenance Manual for detailed instructions.
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-69
SCR Rectifier Inspection/Replacement
Figure 1.14: Location of SCR Rectifier Assembly and its Cooling Fans
WARNING:
Lethal voltages exist inside the transmitter when the power is turned
on. Turn off the power at the source and verify the 40 bright green
LEDs on the power module interface PWBs are off before removing
any connections or PWBs.
Electrolytic Capacitors
DC Indicators LEDs(DS1 through DS4 on
each Power ModuleInterface PWB)
Ac Indicator LEDsA72A1
Terminal Block TB1
Cooling Fan 2
SCR RectifierAssembly A72
Figure Shown withRear Door Removed
Line 1, Line 2, Line 3Connections (behind)
DC (+) and DC (-)Connections
Cooling Fan 1
NX100 Troubleshooting Manual Responding to alarms
Page 1-70 Issue 3.3 2017-03-31
1. Turn off (disable and lock out) the ac power at the source. Open the rear door verify the three ac indicator LEDs are off (amber when on). Next verify the green dc indicator LEDs on the power module interface PWBs are off indicating the capacitors are discharged. For additional safety, measure the dc voltage across the + and - terminals of any of the large, electrolytic capacitors on the floor of the cabinet after removing the plastic cover. There should be little or no voltage.
2. If you are responding to a Rectifier Fan 1 (or 2) Fail alarm (if not, proceed to Step 3), inspectthe SCR rectifier assembly’s cooling fans (see Figure 1.14 on page 1-69) for debris that mightrestrict proper movement of the fan blades. Try spinning the fan blades to loosen or free anyblockages that may be causing the alarm. If there is no noticeable debris, remove the suspectfan (1 or 2, as specified by the alarm) by disconnecting its wiring and then removing the fourPhilips screws securing it to the top of A72. Replace the fan with a suitable replacement(Nautel Part # 207-8378). Secure the replacement fan to the SCR rectifier assembly andconnect the fan’s wiring as it was previously installed. Return the transmitter to service andverify the fan RPM meter values in the AUI menu. Ensure both fans are operating effectivelyand at relatively similar speeds.
3. Disconnect all wiring attached to the SCR rectifier assembly’s A (LINE 1), B (LINE 2), C(LINE 3), DC (+), DC (-), TB1, TB2 and TB3 terminals, taking note of the wiring labels.
4. Remove and save (6) sets of M5 mounting hardware that support the SCR rectifier assembly.
5. Carefully lift and remove the SCR rectifier assembly from the transmitter.
6. Obtain a replacement SCR rectifier assembly (Nautel Part # 207-7055-06).
7. Reverse Step 3 through Step 5 to reinstall the new or repaired SCR rectifier assembly. Ensureall connections are tight, noting the following connections have special torque values:
• LINE 1, LINE 2 and LINE 3 require 12 N-m (106 in-lbs) of torque.
• DC (+) and DC (-) require 6.8 N-m (60 in-lbs) of torque.
• TB1, TB2 and TB3 require 0.45 N-m (4 in-lbs) of torque.
For wiring termination assistance with connections to the SCR rectifier assembly (A72), check the wiring list in Section 3, “Wiring/connector lists” on page 3-1.
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-71
Low Voltage Power Supply Replacement
See Figure 1.15 on page 1-71.
1. Turn off the ac power at the source. Open the back door and verify the green LEDs on the power module interface PWBs are off, indicating the capacitors are discharged. For additional safety, measure the dc voltage across the + and - terminals of any of the large, electrolytic capacitors on the floor of the cabinet. There should be little or no voltage.
2. Disconnect all wiring attached to the affected power supply module (U3 through U7), taking note of the connector labels on the cables.
Figure 1.15: Location of Low Voltage Power Supplies U3 through U7
3. Remove and save four sets of mounting hardware.
WARNING:
Lethal voltages exist inside the transmitter when the power is turned
on. Turn off the power at the source and verify the 40 bright green
LEDs on the power module interface PWBs are off before removing
any connections or PWBs.
15 V PowerSuppliesU3 (A) and U4 (B)
Back Door and Side PanelRemoved for Clarity
48 V PowerSuppliesU5 (A) and U6 (B)
12 V PowerSupply U7
NX100 Troubleshooting Manual Responding to alarms
Page 1-72 Issue 3.3 2017-03-31
4. Remove the power supply module from the transmitter, noting its reference designation (U3 through U7) should be marked on the side panel near the module.
5. Reverse Step 1 through Step 4 to reinstall the new power supply module. Reconnect all wiring.
RF Power Module Fan Tray replacement
See Figure 1.16.
Figure 1.16: Location of Fan Tray Assemblies
1. Open the front door.
2. Determine the suspect fan tray assembly (A60 through A64) associated with the offending RF power module # alarm(s).
3. Remove and save two sets of mounting hardware. Pull the fan tray assembly out of the transmitter.
4. Reverse Step 1 through Step 3 to install the new fan tray assembly.
Fan TrayAssemblies
Front Door Removed for Clarity
A60 A61 A62 A63 A64
Fan Associated RF Power Module #sTray (A20-A59)
A60 A20,A21,A30,A31,A40,A41,A50,A51
A61 A22,A23,A32,A33,A42,A43,A52,A53
A62 A24,A25,A34,A35,A44,A45,A54,A55
A63 A26,A27,A36,A37,A46,A47,A56,A57
A64 A28,A29,A38,A39,A48,A49,A58,A59
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-73
Single Board Computer (SBC) Replacement
Figure 1.17: Single-Board Computer A1 (on the back of the front door)
NOTE: The replacement SBC assembly is static sensitive and can be damaged by electrostatic discharge. Observe the static precautions described in “Electrostatic protection” on page 1-3 at all times.
Table 1.4: SBC Connector Mating Information
Connector SBC Mate
P30 CPU 12V1P35 FPANEL1W66P2 COM3W67P2 COM1VGA (from touch screen) VGA1COM (from touch screen) COM2*USB USB*Denotes optional, if USB audio interface PWB (A6) is installed
COM
COM1(W67P2)
VGA1
CPU 12V1(P30)
A1TB1-RESET(P35)
NX v4.XLAN1 USB
FLASHCARD
W66P2
RED WIREBOTTOM RIGHT
RED WIRE TOP LEFT
NX100 Troubleshooting Manual Responding to alarms
Page 1-74 Issue 3.3 2017-03-31
1. Open the front door and locate the single-board computer (SBC) on the back of the door.
2. Use a 7-mm nut-driver screwdriver/socket to remove the nuts that hold the SBC’s protective cover to the front door of the transmitter.
3. Disconnect the power connector (P30 - see Figure 1.17 on page 1-73) from the SBC.
4. Disconnect the remaining connectors from the current SBC. Remove the SBC from the front door by removing its seven M3 securing screws.
5. Locate or obtain the replacement SBC (Nautel Part # 207-8710). Obtain the flash card (see Figure 1.17 on page 1-73) from the SBC removed in Step 5 and insert it into the replacement SBC. If a new flash card is used, note that many settings will have to be re-entered such as User Accounts, Network Setup, Email Configuration, Notifications, etc.
6. Install the replacement SBC using its seven M3 securing screws.
7. Reconnect all mating connectors (see Table 1.4 for reference) leaving the power connector (P30) as the last to connect. Take note the COM3 board header is larger than the connector and must plug into the 10 pins shown in Figure 1.17 on page 1-73.
8. Once the AUI is rebooted, go to the System Settings page and select Upgrade Software to view the files in the Select Upgrade File list. These are the files on the flash card. Select the latest version software from the list (e.g., 4.7.0.12) and press the Details button. Information about the transmitter device’s currently installed software versions and the selected software upgrade file should appear.
9. In the Software Versions screen (see Figure 1.18 on page 1-75), if there are any red highlighted lines, compare the Installed Version column with the Selected Upgrade column. If the Selected Upgrade value is a higher number, an upgrade is available for that component from the selected software upgrade file. If desired, the software upgrade can be performed now or scheduled for another convenient time noting the transmitter will need to be RF off. See Upgrade software procedure in Section 4 of the Operations & Maintenance Manual for details.
NOTE: If using USB as the Audio Source, change to a different Audio Source before starting this procedure to avoid airtime interruptions.
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-75
Figure 1.18: Software Version Details
Controller upgrade available
NX100 Troubleshooting Manual Responding to alarms
Page 1-76 Issue 3.3 2017-03-31
Arc Detector UV Sensor Replacement
Figure 1.19: Location of Arc Detector Assembly
WARNING:
Lethal voltages exist inside the transmitter when the power is turned
on. Turn off the power at the source and verify the 40 bright green
LEDs on the power module interface PWBs are off before removing
any connections or PWBs.
Partial Rear View; Rear DoorRemoved for Clarity
Arc Detector Assembly (A71)
NX100 Troubleshooting Manual Responding to alarms
Issue 3.3 2017-03-31 Page 1-77
1. Turn off (disable and lock out) the ac power at the source. Open the rear door to verify the three ac indicator LEDs are off (amber when on). Next verify the green dc indicator LEDs on the power module interface PWBs are off indicating the capacitors are discharged. For additional safety, measure the dc voltage across the + and - terminals of any of the large, electrolytic capacitors on the floor of the cabinet after removing the plastic cover. There should be little or no voltage.
2. Disconnect the cable attached to the arc detector assembly (see Figure 1.19 on page 1-76),taking note of the connector label on the cable and the assembly.
3. Carefully remove and retain the two (2) sets of mounting hardware and remove the arcdetector assembly from the transmitter. Remove the UV sensor (U2) from the arc detectorassembly’s driver PWB (U1) (see Figure 1.20 on page 1-78).
4. Obtain a replacement UV sensor (Nautel Part # UB89).
5. Cut the anode lead of the UV sensor to the same length as the cathode, noting the anode/cathode orientation and taking care not to bend the leads. Install the UV sensor on the arcdetector assembly’s driver PWB (U1), ensuring proper orientation (see Figure 1.20 on page1-78 and Figure 1.21 on page 1-78).
6. Complete the replacement procedure by reversing Step 2 and Step 3.
7. Close the rear door and turn on (enable) the ac power source to resume transmitteroperation. Ensure the offending alarm has cleared.
WARNING:
Take special care when handling the UV sensor after removing it from
the packaging so it does not receive impact shock. Do not allow skin
contact with the glass face. Wear clean gloves to ensure no oils from
your skin contact the surface of the glass.
NX100 Troubleshooting Manual Responding to alarms
Page 1-78 Issue 3.3 2017-03-31
Figure 1.20: Arc Detector Assemble UV Photo Tube Sensor (UB89)
Figure 1.21: UB89 Orientation on Driver PWB U1
A71U2
A71
NX100 Troubleshooting Manual Parts Lists
Issue 3.3 2017-03-31 Page 2-1
Section 2: Parts Lists
Parts information
This section contains reference designation lists that provide descriptive and provisioning information for all electrical and mechanical parts that have an assigned reference designation and form a part of the subject equipment.
Family tree
Figure 2.1 on page 2-7 depicts the family tree for the subject equipment. It is based on the descending order of the reference designation hierarchy and identifies all assemblies that have an assigned Nautel configuration control number.
How to locate information about a specific part
To locate the information for a specific part, the assigned reference designation for the part must be known. In addition, the Nautel nomenclature (e.g., NAP39A) assigned to the assembly containing the part or the full reference designation, including the reference designation of all higher assemblies, must be known.
When the nautel nomenclature is known:
• Refer to the family tree (Figure 2.1 on page 2-7) and identify the block(s) associated with theNautel nomenclature. At the bottom of each family tree block, a reference is made to “SeePart Number Index Table”. Locate the part's reference designation in the identifiedreference designation list in this section, noting they are sorted alphanumerically.
When the reference designation is known:
• Refer to the family tree depicted in Figure 2.1 on page 2-7 with the full reference designation.
• Follow the family tree branches to the block that represents the lowest level assemblyassigned a Nautel configuration control number. Then locate the part number index table forthat Nautel configuration control number.
• Locate the part's reference designation in the specified table.
NX100 Troubleshooting Manual Parts Lists
Page 2-2 Issue 3.3 2017-03-31
Reference designation lists
Individual reference designation lists are provided for:
• assemblies that are assigned an alpha-prefixed Nautel nomenclature (e.g., NAP39A)
• cable harnesses that are assigned a numbered Nautel part (e.g., 207-8004-02)
• optional kits that are assigned a numbered Nautel part
To obtain the full reference designation for a specific part the Nautel configuration control number must be located in the family tree (Figure 2.1 on page 2-7) to include the reference designation of all higher level assemblies. The reference designation lists, which are titled and presented in alphanumeric order, are divided into columns to aid in locating specific information.
Column content
The following paragraphs provide an explanation of the purpose and contents of each column in the part number indexes.
Ref des column
The 'ref des' column contains the reference designation for a specific part. These designations are assigned in accordance with the requirements of American Society of Mechanical Engineers ASME Y14.44-2008.
Description column
This column contains the name and descriptive information for each part. The key word is presented first, followed by the adjective identifiers. When the description is 'See Family Tree for Assembly Nomenclature', the associated part is subject to its own part index table or is contained in an optional kit's list. Look up the reference designation list title (nomenclature) and the reference designation of the associated part in the family tree (Figure 2.1 on page 2-7) to determine where to locate its part information.
Nautel # column
This column contains the Nautel number assigned to each part. This number is Nautel's drawing number for Nautel manufactured parts, Nautel's configuration control number for assemblies that are under configuration control management, or Nautel's inventory management number for purchased parts. When a Nautel configuration control number (e.g. NAPC*) is referenced in this column, the associated ref des item is subject to its own part index table.
NX100 Troubleshooting Manual Parts Lists
Issue 3.3 2017-03-31 Page 2-3
Vendor # column
This column contains an original equipment manufacturer's part number for a part. A single part number is listed for each part, even though there may be more than one known manufacturer. The listed number is Nautel's usual or preferred choice. The use of this number does not restrict Nautel from selecting and using commercial equivalents during manufacture, where their use will not degrade circuit operation or reliability.
OEM code column
This column typically contains a five digit coded group as the original equipment manufacturer's (OEM) identifier. The code was extracted from Cataloging Handbook H4/H8 Commercial and Government Entity (Cage) Code. Manufacturers that were not listed in the catalog when this listing was compiled have been assigned a unique five-letter code. This code is assigned arbitrarily and has no other significance. The manufacturers identified for parts that have JAN or MIL part numbers are Nautel's normal supply source for that part.
Note: OEM code 37338 is listed for parts manufactured by Nautel or to a Nautel control drawing. United States of America customers should refer all replacement part orders to Nautel Maine Incorporated (OEM code 57655).
OEM code to manufacturer’s cross-reference
The OEM (CAGE) codes listed in the reference designation lists are representative of the original equipment manufacturers of those parts. To determine a specific part's manufacturer contact information, enter the five-character OEM (CAGE) code for that part in the following website:
https://www.bpn.gov/bincs/begin_search.asp
After entering the OEM (CAGE) code number, manufacturer pertinent information (address, telephone number, fax number, etc.) will be displayed. Please contact Nautel if a part cannot be obtained (see also “On-Line Part Quotes” in the Warranty section of this manual).
Manufacturer's index
For customers without web access, Table 2.1 on page 2-4 provides a cross-reference from the original equipment manufacturer's (OEM) codes to the manufacturer's name. The listing is sorted alphanumerically by the OEM code.
NX100 Troubleshooting Manual Parts Lists
Page 2-4 Issue 3.3 2017-03-31
Common abbreviations/acronyms
The following abbreviations/acronyms may appear in the Description of Part column:
• SMTDenotes item is designed to be installed using Surface Mount Technology.
• MTADenotes item is a Mass Termination Assembly connector.
• SIPSingle In-line Package
• DIPDual In-line Package
• IDCDenotes item is an Insulation Displacement connector for ribbon cable.
Table 2.1: OEM Codes / Manufacturers
OEM Code Manufacturer OEM Code Manufacturer00779 CTS Company Incorporated 0DY74 Microsemi Corp-Power Products Grp
01295 Texas Instruments Incorporated 0FMA6 Neutrik USA Inc
01961 Pulse Engineering Inc. 0G343 Huffman Manufacturing Co.
02660 Amphenol Corp., Spectra-Strip/ITD 0GP12 Radiall Inc.
03LB0 Sandisk Corporation 0P2J5 Kingston Technology Company Inc.
04713 Motorola Incorporated 12060 Diodes Inc.
06090 Raychem Corporation 13919 Burr-Brown Corp.
07263 Fairchild Semiconductor Corp 14655 Cornell Dubilier Electronics
07933 Fairchild Semiconductor Corp 15542 Scientific Components Corp.
07EN1 Advanced Monolythic Ceramics 1AA44 Collmer Semiconductor Inc
08779 Signal Transformer Co. Inc. 1E4C5 SEI Electronics Inc.
09482 Amp of Canada Limited 1FN41 Atmel Corporation
09581 3M Canada Incorporated 1JRT7 Epson Electronics American Inc.
0A5K5 IXYS Corporation 1KK13 ITT Industries Incorporated
0AG18 Hirose Electric / USA / Inc. 1MQ07 ZRG Incorporated
0B0A9 Dallas Semiconductor Corporation 1N3T0 Semikron Inc.
0CVK3 Allegro Microsystems Inc. 1W344 United Chemi-Con Mfg Inc.
NX100 Troubleshooting Manual Parts Lists
Issue 3.3 2017-03-31 Page 2-5
OEM Code Manufacturer OEM Code Manufacturer22421 Thomas and Betts Limited 79942 Intel Corp Sales Office
23598 Ross Engineering Corp. 7D893 Fairchild Semiconductor Corporation
23875 M-Tron Industries Incorporated 80294 Bourns Instrument Incorporated
24355 Analog Devices Incorporated 83330 Dialight Corporation, DBA Dialight
27014 National Semiconductor Corporation 90201 Hammond Mfg. Co. Ltd.
27264 Molex Incorporated 91833 Keystone Electronics Corporation
2D829 Cornell Dubilier Electronics Corp. 91929 Honeywell Incorporated
31433 Kemet Electronics Corporation 95146 Alco Electronic Products Inc.
31781 Edac Incorporated 96095 AVX Ceramics, Div of AVX Corp
33062 Ferronics Incorporated AMP/TYCO Tyco Electronics Corporation
35005 Dale Electronics ANALOG D Analog Devices
37338 Nautel Limited ASTEC Astec Power
3CYG3 Sanyo Denki America Inc. AVAGO Avago Technologies
3DX59 Citizen America Corporation AVX CORP AVX Corporation
3EH09 Murata Electronics North America Inc C3057 Conec Elektronische Bauelemente
3USB5 Startech.com USA LLP C4751 Epcos AG
3WCG0 Ferraz Shawmut Incorporated C & D C & D Technologies
45496 Digital Systems COMET
48862 GC Electronics Comp Corp Components Corporation
49588 S B E Incorporated CORNELL See 2D829
4G927 Raychem Corporation CREE INC Cree Inc.
4TKQ5 UPE Inc. ER737 Texas Instruments
54473 Matsushita Electric Corp of America HYPERTR Hypertronics Corporation
54583 TDK Electronics Corp. IDT Integrated Device Technology, Inc.
56289 Sprague Electric Company ITT INDUS See 1KK13
56699 BC Components KEYSTONE See 91833
56845 Vishay Dale Electronics Inc. KYCON Kycon Cable & Connector Inc.
59124 KOA Speer Electronics Inc. LINEAR See 64155
59993 International Rectifier Corp. LITEON Vishay-Liteon Power Semiconductor
5Y407 Phoenix Contact Inc. L3845 Circuit-Test Electronics Ltd.
63590 Premier Industrial Corp. MARKTEC Marktech Optoelectronics
64155 Linear Technology Corporation MICRON Micron Technology, Inc.
65786 Cypress Semiconductor Corp. MINI-CIRC Mini-Circuits
71400 Cooper Bussman Inc. MOLEX Molex Inc.
71468 ITT Corporation NATIONAL See 27014
75042 TRW Incorporated NXP SEMI NXP Semiconductors
75915 Littelfuse World Headquarters ON-SEMI ON Semiconductor
Table 2.1: OEM Codes / Manufacturers
NX100 Troubleshooting Manual Parts Lists
Page 2-6 Issue 3.3 2017-03-31
OEM Code Manufacturer OEM Code ManufacturerPANAS Panasonic SL575 Meanwell Sales Information
PHOENIX See 5Y407 TDK See 54583
SARONIX Saronix TEXAS See ER737
SAW84 IEI Technology Corp. U3040 ST Microelectronics
SB ELE SB Electronics Incorporated VENKEL Venkel Ltd
SCT30 Fairchild WANJIA Wanjia
Table 2.1: OEM Codes / Manufacturers
NX100 Troubleshooting Manual Parts Lists
Issue 3.3 2017-03-31 Page 2-7
Figure 2.1: NX100 Family Tree
F2070370 V1
A12, A13, A14NOT USED
NOT USED
A73
RF POWER MODULE (A)
NAP39A
A20
B+ DISTRIBUTION ASSEMBLYA18
NAX243A
A2, A4, A6, A8, A10RF COMBINER BACK PLANE
NAH57C/01
100 kW AM BROADCAST TRANSMITTERNARA52C
FAN TRAY ASSEMBLYA60 - A64
207-8133
A11A4REMOTE INTERFACE PWB
NAPI106
VOLTAGE PROBEA66
207-6111-02
MODULATOR/POWER AMPLIFIER PWB
NAPA34A
A20A1
CAPACITOR ASSEMBLY
207-7120-05
A70
RF DRIVE DISTRIBUTION PWB
NAPI98
A16
POWER MODULE INTERFACE PWB
NAPI95A/01
A2A1,A4A1,A6A1,A8A1,A10A1
100 kW RECTIFIER ASSEMBLY
207-7055-06
A72
DIRECTIONAL COUPLER
NAFP106B
A68
DIGITAL AM EXCITER PWB (A)
NAPE78A/01
A11A2
(OPTIONAL)
A11A6GPS SYNC PWB (B)
NAPX46
ANTENNA GROUND SWITCHA74
207-8320-04
RF POWER MODULE (B - AP)
SAME AS A20
A21 - A59B+ DISTRIBUTION ASSEMBLY
A19
NAX243A
PDM DRIVE DISTRIBUTION PWB
NAPI154
A17
DIGITAL AM EXCITER PWB (B)
NAPE78A/01
A11A3
A1, A3, A5, A7, A9RF COMBINER BACK PLANE
NAH57C
A11CONTROL/EXCITER PANEL
NAE96C/01
(OPTIONAL)
A11A7EXGINE PWB
NAPE74
ARC DETECTOR ASSEMBLYA71
215-8060-01
STATIC DRAIN CHOKEA69
183-6059
CONTROL/DISPLAY DOOR ASSEMBLYA65
207-2010-06
CURRENT PROBEA67
207-6213-04
POWER MODULE INTERFACE PWB
NAPI95A
A1A1,A3A1,A5A1,A7A1,A9A1 A11A1CONTROL/INTERFACE PWB
NAPC160B/01
A15RACK INTERFACE PWB
NAPI152A
(OPTIONAL)
A11A5GPS SYNC PWB (A)
NAPX46
NX100 Troubleshooting Manual Parts Lists
Page 2-8 Issue 3.3 2017-03-31
207-1034-07 Transformer Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
K01 207-1036-10Relay Assy 207-1036-10 37338
K02 207-1036-10Relay Assy 207-1036-10 37338
207-1034-08 Transformer Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
K01 207-1036-10Relay Assy 207-1036-10 37338
K02 207-1036-10Relay Assy 207-1036-10 37338
207-1036-10 Relay Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
A01 207-6045-02Gas Discharge PWB Assy 207-6045-02 37338
K01 KA60Relay, Latching, 100A, Dbl Coil, Reverse Polarity K100B-10-048AR-048(RoHS)
P01 JU02MTA, Standard Dust Cover, 4 pin 640551-4 09482
P01 JU27MTA, Keyed Closed End Housing,4 pin,22AWG 3-644463-4(ROHS) AMP
00779
207-2010-06 Control Door Assy-NX Series
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
A01 207-8710SBC Assy, NX Series, RLS 3 207-8710 37338
U04 206-5400-01Touchscreen Monitor Kit Assy (UR108) 206-5400-01 37338
207-6045-02 Gas Discharge PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
U01 UM98Gas Discharge Tube, 600V, Fail Short SL1024A600RF(RoHS)
75915
207-6111-02 Voltage Probe Assy, NX100
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C01 CAP93Capacitor, Mica, Dipped, 47000pF 2% 500V CD42FD473GO3F(RoHS)
C02 CB06Capacitor, Mica, Dipped, 9100pF 2% 500V CM07FD912G03 14655
J01 JDP26Conn, Coax, BNC, Recept, 50ohm UG1094/U 02660
Page 1 of 104 207-6111-02
207-6213-04 DO NOT USE - SEE NOTESCurrent Probe-NX25, 50,100,200
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
J01 JT05Conn, Coax, BNC, Recept, 50ohm, Insul 31-10 02660
J02 -Not Used NOT USED 37338
P01 JDP24Conn, Coax, BNC, Plug, 50ohm,Crimp 225395-7 09482
R01 RBP36Resistor, Film, 39 Ohms, 5% 2W GS-3, 39 OHMS 75042
R02 RBP05Resistor, Film, 47 Ohms, 5% 2W GS-3, 47 OHMS 75042
R03 RBP07Resistor, Film, 100 Ohms, 5%2W GS-3, 100 OHMS 75042
R04 RBP07Resistor, Film, 100 Ohms, 5%2W GS-3, 100 OHMS 75042
T01 UC89Transducer, Current, 0.1V/A,150Arms max, Isolated, Unpaint
CM-10-LI-U 31283
207-7055-06 100KW Rectifier Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
A01 207-7144-01AC Power Indicator Assy, NX100-NX400 207-7144-01 37338
C01 CS68Capacitor, Non-Polarized, 10uf, +/-20%, 35V NNR100M35V5X11 NICCOMP
C02 CCG07Capacitor, Ceramic, 0.1uF 10%100V CKR06BX104KRV 56289
U01 UR96Rectifer,(BeO) SCR,3-PH,400VDC 500A, FULL CTRL 30655292
Page 2 of 104 207-7055-06
207-7120-05 Capacitor Assy, 100kW Rack
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C01 CT54Capacitor,Elect.,10,000uf,450Vdc 3186GN103T450MPA1
14655
C02 CT54Capacitor,Elect.,10,000uf,450Vdc 3186GN103T450MPA1
14655
C03 CT54Capacitor,Elect.,10,000uf,450Vdc 3186GN103T450MPA1
14655
C04 CT54Capacitor,Elect.,10,000uf,450Vdc 3186GN103T450MPA1
14655
C05 CT54Capacitor,Elect.,10,000uf,450Vdc 3186GN103T450MPA1
14655
C06 CT54Capacitor,Elect.,10,000uf,450Vdc 3186GN103T450MPA1
14655
C07 CT54Capacitor,Elect.,10,000uf,450Vdc 3186GN103T450MPA1
14655
C08 CT54Capacitor,Elect.,10,000uf,450Vdc 3186GN103T450MPA1
14655
C09 CT54Capacitor,Elect.,10,000uf,450Vdc 3186GN103T450MPA1
14655
C10 CT54Capacitor,Elect.,10,000uf,450Vdc 3186GN103T450MPA1
14655
C11 CT54Capacitor,Elect.,10,000uf,450Vdc 3186GN103T450MPA1
14655
C12 CT54Capacitor,Elect.,10,000uf,450Vdc 3186GN103T450MPA1
14655
K01 207-8611-01Discharge Relay Assy 207-8611-01 37338
R01 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
R02 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
R03 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
R04 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
R05 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
R06 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
R07 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
R08 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
R09 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
R10 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
R11 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
R12 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
R13 RX53Resistor, Wirewound, HL, 50 ohms/350W/5% c/w mt fixture
DQR-F 350W 50 ohms
U08 -Not Used NOT USED 37338
Page 3 of 104 207-7120-05
Continued from previous page
207-7120-05 Capacitor Assy, 100kW Rack
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
U09 UF28Rect/Assy, Bridge, 800V, 35A GBPC3508 LITEON
U10 UF28Rect/Assy, Bridge, 800V, 35A GBPC3508 LITEON
U11 UF28Rect/Assy, Bridge, 800V, 35A GBPC3508 LITEON
U12 UF28Rect/Assy, Bridge, 800V, 35A GBPC3508 LITEON
U13 UF28Rect/Assy, Bridge, 800V, 35A GBPC3508 LITEON
207-7144-01 AC Power Indicator Assy, NX100-NX400
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
DS01 BAP44LED, Pilot Light, Amber, 230Vac LEDTECA220AC
DS02 BAP44LED, Pilot Light, Amber, 230Vac LEDTECA220AC
DS03 BAP44LED, Pilot Light, Amber, 230Vac LEDTECA220AC
J01 JT115Conn, Mate-N-Lok, Cap, 4,600V/36A, .250" Centerline 1-480703-0(RoHS) L2433
J01 JT46Conn, Contact, Socket, 18-14,Mate-N-Lock 350919-3 00779
207-7146 AC Indicator Cable,NX100-NX400
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
E01 HAM60Connector, Quick-Dis, M,1/4 Tab, 14-16 AWG 3-520107-2 09482
P01 JT116Conn, Mate-N-Lok, Plug, 2,600V/36A, .250" Centerline 1-480702-0(RoHS) L2433
P01 JT66Conn, Contact, Pin,18-14MATE-N-LOK 350918-3 00779
Page 4 of 104 207-7146
207-8004-02 Cableform, Main, NX100 RLS 3
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
E01 HAR29Lug, Crimp, Joint, Butt,16-14 AWG, Blue 320562 09482
E02 HAR29Lug, Crimp, Joint, Butt,16-14 AWG, Blue 320562 09482
E03 HAM69Conn,Quick-Dis,F,1/4 Tab 14-16Shrink B-106-3632 06090
E04 HAM69Conn,Quick-Dis,F,1/4 Tab 14-16Shrink B-106-3632 06090
P01 JR27Conn, Socket, D-Sub, 9 pin 205203-1 09482
P01 JT16Conn, Lock Screw, D-Sub, Male 205980-1 09482
P02 JR27Conn, Socket, D-Sub, 9 pin 205203-1 09482
P02 JT16Conn, Lock Screw, D-Sub, Male 205980-1 09482
P03 JR27Conn, Socket, D-Sub, 9 pin 205203-1 09482
P03 JT16Conn, Lock Screw, D-Sub, Male 205980-1 09482
P04 JR27Conn, Socket, D-Sub, 9 pin 205203-1 09482
P04 JT16Conn, Lock Screw, D-Sub, Male 205980-1 09482
P05 JR27Conn, Socket, D-Sub, 9 pin 205203-1 09482
P05 JT16Conn, Lock Screw, D-Sub, Male 205980-1 09482
P06 JR39Conn, Plug, D-Sub, 25 pin, HDP-20 205208-1 09482
P06 JT16Conn, Lock Screw, D-Sub, Male 205980-1 09482
P07 JR39Conn, Plug, D-Sub, 25 pin, HDP-20 205208-1 09482
P07 JT16Conn, Lock Screw, D-Sub, Male 205980-1 09482
P08 JR39Conn, Plug, D-Sub, 25 pin, HDP-20 205208-1 09482
P08 JT16Conn, Lock Screw, D-Sub, Male 205980-1 09482
P09 JR38Conn, Socket, D-Sub, HDP-20, 25 pin 205207-1 09482
P09 JT16Conn, Lock Screw, D-Sub, Male 205980-1 09482
P10 JR28Conn, Plug, D-Sub, 9 pin 205204-1 09482
P10 JT16Conn, Lock Screw, D-Sub, Male 205980-1 09482
P11 JR38Conn, Socket, D-Sub, HDP-20, 25 pin 205207-1 09482
P11 JT16Conn, Lock Screw, D-Sub, Male 205980-1 09482
P12 JT94Connector,Plug,2 P,Socket,66A,600V, 10.16mm 1967375 PHOENIX
P13 JT94Connector,Plug,2 P,Socket,66A,600V, 10.16mm 1967375 PHOENIX
P14 JR38Conn, Socket, D-Sub, HDP-20, 25 pin 205207-1 09482
P14 JT16Conn, Lock Screw, D-Sub, Male 205980-1 09482
P15 JR27Conn, Socket, D-Sub, 9 pin 205203-1 09482
P15 JT16Conn, Lock Screw, D-Sub, Male 205980-1 09482
P16 JT53Conn,Socket,4-Pin,24-28 AWG 22-50-3045 27264
P17 JR27Conn, Socket, D-Sub, 9 pin 205203-1 09482
P17 JT16Conn, Lock Screw, D-Sub, Male 205980-1 09482
P18 JT53Conn,Socket,4-Pin,24-28 AWG 22-50-3045 27264
P19 JU56Conn, HRS, DF11, 2mm, DualSocket 6, Crimp DF11-6DS-2C 0AG18
P20 -Not Used NOT USED 37338
P21 -Not Used NOT USED 37338
Page 5 of 104 207-8004-02
Continued from previous page
207-8004-02 Cableform, Main, NX100 RLS 3
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
P22 JU56Conn, HRS, DF11, 2mm, DualSocket 6, Crimp DF11-6DS-2C 0AG18
P23 JDP24Conn, Coax, BNC, Plug, 50ohm,Crimp 225395-7 09482
P24 JDP24Conn, Coax, BNC, Plug, 50ohm,Crimp 225395-7 09482
P25 JU56Conn, HRS, DF11, 2mm, DualSocket 6, Crimp DF11-6DS-2C 0AG18
P26 JU56Conn, HRS, DF11, 2mm, DualSocket 6, Crimp DF11-6DS-2C 0AG18
P27 JR28Conn, Plug, D-Sub, 9 pin 205204-1 09482
P27 JT16Conn, Lock Screw, D-Sub, Male 205980-1 09482
P28 JDP24Conn, Coax, BNC, Plug, 50ohm,Crimp 225395-7 09482
P29 -Not Used NOT USED 37338
P30 JP59Conn, Recept, Mini-Fit dualrow, 4-pin 39-01-2045 MOLEX
P31 -Not Used NOT USED 37338
P32 -Not Used NOT USED 37338
P35 JU72Conn, Housing, Dual Row, 8 pin, .100 Grid 104482-3(RoHS)
P35 JU73Conn, Socket for JU72, 22-26AWG, 15AU Crimp 1-104480-5(RoHS)
W61 UA202Cable, Ethernet, 75", Shld, Black, 28AWG, 80degC, with guard
PCF-S75I-UA202G(RoHS)
W62 UA202Cable, Ethernet, 75", Shld, Black, 28AWG, 80degC, with guard
PCF-S75I-UA202G(RoHS)
W63 -Not Used NOT USED 37338
W64 UA205Cable, Ethernet,80", Shld, Black, 28AWG, 80degC, with guard
PCF-S80I-UA205G(RoHS)
W65 UB75Cable 6ft, 18AWG, Plug Ø 2.1mm/5.5mm 310-920 L3845
W66 UA82Cable, 6 ft.,9-pin D-Sub,M/F,Straight-Through MXT100 3USB5
W67 UA82Cable, 6 ft.,9-pin D-Sub,M/F,Straight-Through MXT100 3USB5
W69 JN49RS232 Cable 2Ft, DB25(M) toDB25(F) 45-0358-0000 48862
W70 JN49RS232 Cable 2Ft, DB25(M) toDB25(F) 45-0358-0000 48862
Page 6 of 104 207-8004-02
207-8008-01 Cableform, RF NX100-NX400
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
W41 UA210Cable, Ethernet, 84", Shld, Black, 28AWG, 80degC, with guard
PCF-S84I-UA210G(RoHS)
W42 UA205Cable, Ethernet,80", Shld, Black, 28AWG, 80degC, with guard
PCF-S80I-UA205G(RoHS)
W43 UA201Cable, Ethernet, 70", Shld, Black, 28AWG, 80degC, with guard
PCF-S70I-UA201G(RoHS)
W44 UA214Cable, Ethernet, 67", Shld, Black, 28AWG, 80degC, with guard
PCF-S67I-UA214G(RoHS)
W45 UA201Cable, Ethernet, 70", Shld, Black, 28AWG, 80degC, with guard
PCF-S70I-UA201G(RoHS)
W46 UA214Cable, Ethernet, 67", Shld, Black, 28AWG, 80degC, with guard
PCF-S67I-UA214G(RoHS)
W47 UA203Cable, Ethernet, 56", Shld, Black, 28AWG, 80degC, with guard
PCF-S56I-UA203G(RoHS)
W48 UA203Cable, Ethernet, 56", Shld, Black, 28AWG, 80degC, with guard
PCF-S56I-UA203G(RoHS)
W49 UA203Cable, Ethernet, 56", Shld, Black, 28AWG, 80degC, with guard
PCF-S56I-UA203G(RoHS)
W50 UA226Cable, Ethernet, 52", Shld, Black, 28AWG, 80degC, with guard
PCF-S52I-UA226G(RoHS)
W51 UA213Cable, Ethernet, 43", Shld, Black, 28AWG, 80degC, with guard
PCF-S43I-UA213G(RoHS)
W52 UA201Cable, Ethernet, 70", Shld, Black, 28AWG, 80degC, with guard
PCF-S70I-UA201G(RoHS)
W53 UA202Cable, Ethernet, 75", Shld, Black, 28AWG, 80degC, with guard
PCF-S75I-UA202G(RoHS)
W54 UA214Cable, Ethernet, 67", Shld, Black, 28AWG, 80degC, with guard
PCF-S67I-UA214G(RoHS)
W55 UA214Cable, Ethernet, 67", Shld, Black, 28AWG, 80degC, with guard
PCF-S67I-UA214G(RoHS)
W56 UA203Cable, Ethernet, 56", Shld, Black, 28AWG, 80degC, with guard
PCF-S56I-UA203G(RoHS)
W57 UA203Cable, Ethernet, 56", Shld, Black, 28AWG, 80degC, with guard
PCF-S56I-UA203G(RoHS)
W58 UA202Cable, Ethernet, 75", Shld, Black, 28AWG, 80degC, with guard
PCF-S75I-UA202G(RoHS)
W59 UA205Cable, Ethernet,80", Shld, Black, 28AWG, 80degC, with guard
PCF-S80I-UA205G(RoHS)
W60 UA210Cable, Ethernet, 84", Shld, Black, 28AWG, 80degC, with guard
PCF-S84I-UA210G(RoHS)
Page 7 of 104 207-8008-01
207-8009-02 Cableform, PDM NX100-NX300 (RLS 3)
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
W01 UA203Cable, Ethernet, 56", Shld, Black, 28AWG, 80degC, with guard
PCF-S56I-UA203G(RoHS)
W02 UA208Cable, Ethernet, 48", Shld, Black, 28AWG, 80degC, with guard
PCF-S48I-UA208G(RoHS)
W03 UA200Cable, Ethernet, 40", Shld, Black, 28AWG, 80degC, with guard
PCF-S40I-UA200G(RoHS)
W04 UA212Cable, Ethernet, 33", Shld, Black, 28AWG, 80degC, with guard
PCF-S33I-UA212G(RoHS)
W05 UA213Cable, Ethernet, 43", Shld, Black, 28AWG, 80degC, with guard
PCF-S43I-UA213G(RoHS)
W06 UA204Cable, Ethernet, 36", Shld, Black, 28AWG, 80degC, with guard
PCF-S36I-UA204G(RoHS)
W07 UA199Cable, Ethernet, 28", Shld, Black, 28AWG, 80degC, with guard
PCF-S28I-UA199G(RoHS)
W08 UA198Cable, Ethernet, 21", Shld, Black, 28AWG, 80degC, with guard
PCF-S21I-UA198G(RoHS)
W09 UA208Cable, Ethernet, 48", Shld, Black, 28AWG, 80degC, with guard
PCF-S48I-UA208G(RoHS)
W10 UA213Cable, Ethernet, 43", Shld, Black, 28AWG, 80degC, with guard
PCF-S43I-UA213G(RoHS)
W11 UA204Cable, Ethernet, 36", Shld, Black, 28AWG, 80degC, with guard
PCF-S36I-UA204G(RoHS)
W12 UA227Cable, Ethernet, 25", Shld, Black, 28AWG, 80degC, with guard
PCF-S25I-UA227G(RoHS)
W13 UA200Cable, Ethernet, 40", Shld, Black, 28AWG, 80degC, with guard
PCF-S40I-UA200G(RoHS)
W14 UA212Cable, Ethernet, 33", Shld, Black, 28AWG, 80degC, with guard
PCF-S33I-UA212G(RoHS)
W15 UA227Cable, Ethernet, 25", Shld, Black, 28AWG, 80degC, with guard
PCF-S25I-UA227G(RoHS)
W16 UA228Cable, Ethernet, 18", Shld, Black, 28AWG, 80degC, with guard
PCF-S18I-UA228G(RoHS)
W17 UA208Cable, Ethernet, 48", Shld, Black, 28AWG, 80degC, with guard
PCF-S48I-UA208G(RoHS)
W18 UA200Cable, Ethernet, 40", Shld, Black, 28AWG, 80degC, with guard
PCF-S40I-UA200G(RoHS)
W19 UA212Cable, Ethernet, 33", Shld, Black, 28AWG, 80degC, with guard
PCF-S33I-UA212G(RoHS)
W20 UA227Cable, Ethernet, 25", Shld, Black, 28AWG, 80degC, with guard
PCF-S25I-UA227G(RoHS)
W21 UA213Cable, Ethernet, 43", Shld, Black, 28AWG, 80degC, with guard
PCF-S43I-UA213G(RoHS)
W22 UA204Cable, Ethernet, 36", Shld, Black, 28AWG, 80degC, with guard
PCF-S36I-UA204G(RoHS)
W23 UA227Cable, Ethernet, 25", Shld, Black, 28AWG, 80degC, with guard
PCF-S25I-UA227G(RoHS)
W24 UA228Cable, Ethernet, 18", Shld, Black, 28AWG, 80degC, with guard
PCF-S18I-UA228G(RoHS)
W25 UA213Cable, Ethernet, 43", Shld, Black, 28AWG, 80degC, with guard
PCF-S43I-UA213G(RoHS)
W26 UA204Cable, Ethernet, 36", Shld, Black, 28AWG, 80degC, with guard
PCF-S36I-UA204G(RoHS)
Page 8 of 104 207-8009-02
Continued from previous page
207-8009-02 Cableform, PDM NX100-NX300 (RLS 3)
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
W27 UA199Cable, Ethernet, 28", Shld, Black, 28AWG, 80degC, with guard
PCF-S28I-UA199G(RoHS)
W28 UA198Cable, Ethernet, 21", Shld, Black, 28AWG, 80degC, with guard
PCF-S21I-UA198G(RoHS)
W29 UA213Cable, Ethernet, 43", Shld, Black, 28AWG, 80degC, with guard
PCF-S43I-UA213G(RoHS)
W30 UA204Cable, Ethernet, 36", Shld, Black, 28AWG, 80degC, with guard
PCF-S36I-UA204G(RoHS)
W31 UA199Cable, Ethernet, 28", Shld, Black, 28AWG, 80degC, with guard
PCF-S28I-UA199G(RoHS)
W32 UA198Cable, Ethernet, 21", Shld, Black, 28AWG, 80degC, with guard
PCF-S21I-UA198G(RoHS)
W33 UA229Cable, Ethernet, 45", Shld, Black, 28AWG, 80degC, with guard
PCF-S45I-UA229G(RoHS)
W34 UA204Cable, Ethernet, 36", Shld, Black, 28AWG, 80degC, with guard
PCF-S36I-UA204G(RoHS)
W35 UA199Cable, Ethernet, 28", Shld, Black, 28AWG, 80degC, with guard
PCF-S28I-UA199G(RoHS)
W36 UA198Cable, Ethernet, 21", Shld, Black, 28AWG, 80degC, with guard
PCF-S21I-UA198G(RoHS)
W37 UA208Cable, Ethernet, 48", Shld, Black, 28AWG, 80degC, with guard
PCF-S48I-UA208G(RoHS)
W38 UA213Cable, Ethernet, 43", Shld, Black, 28AWG, 80degC, with guard
PCF-S43I-UA213G(RoHS)
W39 UA204Cable, Ethernet, 36", Shld, Black, 28AWG, 80degC, with guard
PCF-S36I-UA204G(RoHS)
W40 UA199Cable, Ethernet, 28", Shld, Black, 28AWG, 80degC, with guard
PCF-S28I-UA199G(RoHS)
207-8133 NX Fan Tray Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
B01 ZAP37Fan,6.75"x2',[email protected], Tach 109E5748C503(RoHS) SANYO DENKI AMERICA INC
3CYG3
B02 ZAP37Fan,6.75"x2',[email protected], Tach 109E5748C503(RoHS) SANYO DENKI AMERICA INC
3CYG3
E01 HAM06Connector, Quick-Dis, M,1/4 Tab 2-520103-2 09482
E02 HAM06Connector, Quick-Dis, M,1/4 Tab 2-520103-2 09482
E03 HAM06Connector, Quick-Dis, M,1/4 Tab 2-520103-2 09482
E04 HAM06Connector, Quick-Dis, M,1/4 Tab 2-520103-2 09482
E05 HAM06Connector, Quick-Dis, M,1/4 Tab 2-520103-2 09482
E06 HAM06Connector, Quick-Dis, M,1/4 Tab 2-520103-2 09482
J01 JR28Conn, Plug, D-Sub, 9 pin 205204-1 09482
J01 JS32Conn, Lock Screw, D-Sub, Female D110551 71468
Page 9 of 104 207-8133
207-8611-01 Discharge Relay Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
K01 KC76Relay, 12KV, NC, 180V, AUX SW, Ext Range E12-NC-12-1T-181-NAU
207-8710 SBC Assy, NX Series, RLS 3
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
B01 ZAP55Fan, Intel ATOM CPU, 12V, 90mA 31100-000327-RS(RoHS)
SAW84
U01 UB97Motherboard, EPIC, ATOM D525,12V NANO-PV-D5251-R10(STATIC)(RoHS)IEI
SAW84
U02 -Not Used NOT USED 37338
U03 UX145Memory, 2G, DDR3. 1333MHz,SODIMM KVR1333D3S9/2G(RoHS)
0P2J5
U04 -Not Used NOT USED 37338
U05 UB105Memory, Compact Flash Card 8GB SDCFHS-008G-A46(RoHS)
215-8060-01 Arc Detector Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
U01 UB88Board, UV TRON DRVR Pwb, PS 12-24Vdc, Out OC 10ms
C10423-04(STATIC) OJXJ4
U01CX CCF06Capacitor, Tantalum, Epoxy, 1uF 10% 35V T351A105K035AT(RoHS) KEMET
56289
U01J1 JT157Header, 4-pin, Square, Pol,0.1", Rt Angle, PCB mount 22053041 13150
U02 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
NAE96C/01 Control/Exciter Panel Assy.NX15/NX25-NX100
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
A01 NAPC160B/01Control/Interface PWB Assy, NXSeries 207-3030-04 37338
A02 NAPE78A/01Digital AM Exciter PWB Assy 207-3050-03 37338
A03 NAPE78A/01Digital AM Exciter PWB Assy 207-3050-03 37338
A04 NAPI106Remote Interface PWB Assy 207-3040 37338
A05 %See Sales Order % SEE SALES ORDER
37338
A06 %See Sales Order % SEE SALES ORDER
37338
A07 %See Sales Order % SEE SALES ORDER
37338
Page 10 of 104 NAE96C/01
NAFP106B Directional Coupler (FWD/REFLPWR) for NX100
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
A01 NAPP10Directional Coupler PWB Assy,NX100 207-6280-05 37338
C01 CCG42Capacitor, Ceramic, 50pF +10%15000V T500K99COGW8570 56699
T01 207-6052-01Transformer Current Assy 207-6052-01 37338
NAH57C Back Plane, RF Combiner(BOT-- >)
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
A01 NAPI95APower Module Interface PWB 207-1040-03 37338
A02 207-1034-07Transformer Assy 207-1034-07 37338
A03 207-1034-08Transformer Assy 207-1034-08 37338
NAH57C/01 Back Plane, RF Combiner(TOP < --)
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
A01 NAPI95A/01Power Module Interface PWB 207-1040-04 37338
A02 207-1034-07Transformer Assy 207-1034-07 37338
A03 207-1034-08Transformer Assy 207-1034-08 37338
NAP39A RF Power Module Assy,NX Series
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
A01 NAPA34AModulator/RF Amplifier PWBAssy, NX Series 207-1150-01 37338
Q07 QR68Transistor, FET, N Channel, 500V, 0.05ohm fast APT50m50JFLL(Static)
Q08 QR68Transistor, FET, N Channel, 500V, 0.05ohm fast APT50m50JFLL(Static)
Q09 QR68Transistor, FET, N Channel, 500V, 0.05ohm fast APT50m50JFLL(Static)
Q10 QR68Transistor, FET, N Channel, 500V, 0.05ohm fast APT50m50JFLL(Static)
R01 RX49Thermistor,-30/105ºC,10Kohms@25ºC,Neg,Bvalue 3435K
EC2F103A2-07U002
Page 11 of 104 NAP39A
NAPA34A Modulator/RF Amplifier PWBAssy, NX Series
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C001 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C002 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C003 -Not Used NOT USED 37338
C004 -Not Used NOT USED 37338
C005 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C006 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C007 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C008 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C009 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C010 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C011 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C012 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C013 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C014 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C015 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C016 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C017 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C018 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C019 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C020 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C021 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C022 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C023 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C024 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C025 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C026 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C027 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C028 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C029 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C030 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C031 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C032 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C033 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C034 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
Page 12 of 104 NAPA34A
Continued from previous page
NAPA34A Modulator/RF Amplifier PWBAssy, NX Series
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C035 -Not Used NOT USED 37338
C036 -Not Used NOT USED 37338
C037 -Not Used NOT USED 37338
C038 -Not Used NOT USED 37338
C039 -Not Used NOT USED 37338
C040 CP31Capacitor,Polyprop,0.15uF,5%,600V 715P15456MA3 49588
C041 CP31Capacitor,Polyprop,0.15uF,5%,600V 715P15456MA3 49588
C042 -Not Used NOT USED 37338
C043 -Not Used NOT USED 37338
C044 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C045 -Not Used NOT USED 37338
C046 -Not Used NOT USED 37338
C047 -Not Used NOT USED 37338
C048 -Not Used NOT USED 37338
C049 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C050 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C051 CP31Capacitor,Polyprop,0.15uF,5%,600V 715P15456MA3 49588
C052 -Not Used NOT USED 37338
C053 -Not Used NOT USED 37338
C054 -Not Used NOT USED 37338
C055 CP31Capacitor,Polyprop,0.15uF,5%,600V 715P15456MA3 49588
C056 -Not Used NOT USED 37338
C057 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C058 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C059 CCFS01Cap,SMT,Ceramic,0.001uF,10%,50V,X7R,0603 C0603C102K5RAC 31433
C060 CCFS01Cap,SMT,Ceramic,0.001uF,10%,50V,X7R,0603 C0603C102K5RAC 31433
C061 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C062 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C063 -Not Used NOT USED 37338
C064 -Not Used NOT USED 37338
C065 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C066 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C067 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C068 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C069 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C070 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
Page 13 of 104 NAPA34A
Continued from previous page
NAPA34A Modulator/RF Amplifier PWBAssy, NX Series
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C071 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C072 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C073 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C074 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C075 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C076 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C077 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C078 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C079 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C080 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C081 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C082 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C083 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C084 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C085 CCFS23Cap,SMT,Ceramic,18pF,2%,50V,C0G,0603 C0603C180G5GAC 31433
C086 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C087 CCFS23Cap,SMT,Ceramic,18pF,2%,50V,C0G,0603 C0603C180G5GAC 31433
C088 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C089 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C090 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C091 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C092 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C093 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C094 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C095 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C096 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C097 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C098 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C099 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C100 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C101 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C102 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C103 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
Page 14 of 104 NAPA34A
Continued from previous page
NAPA34A Modulator/RF Amplifier PWBAssy, NX Series
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C104 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C105 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C106 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C107 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C108 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C109 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C110 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C111 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C112 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C113 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C114 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C115 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C116 CT88Capacitor, SMT, 0.054u, NPO,5%, J-lead, 4x2225, 1000V
HMC49JN543J102TH02
SCM35
C117 CT88Capacitor, SMT, 0.054u, NPO,5%, J-lead, 4x2225, 1000V
HMC49JN543J102TH02
SCM35
C118 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C119 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C120 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C121 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C122 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C123 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C124 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C125 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C126 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C127 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C128 -Not Used NOT USED 37338
C129 CT57Capacitor, SMT, Al Electroytic330uF, 25VDC,ESR 0.8ohm
AVS337M25G24T 2D829
C130 -Not Used NOT USED 37338
C131 -Not Used NOT USED 37338
Page 15 of 104 NAPA34A
Continued from previous page
NAPA34A Modulator/RF Amplifier PWBAssy, NX Series
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C132 -Not Used NOT USED 37338
C133 CT58Capacitor, SMT, 0.47u, 630V,X7R, 20%, j-lead, MLCC CKG57NX7R2J474M(RoHS)
C134 CT58Capacitor, SMT, 0.47u, 630V,X7R, 20%, j-lead, MLCC CKG57NX7R2J474M(RoHS)
C135 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C136 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C137 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C138 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C139 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C140 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C141 -Not Used NOT USED 37338
C142 -Not Used NOT USED 37338
C143 -Not Used NOT USED 37338
C144 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C145 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C146 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C147 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
CR01 -Not Used NOT USED 37338
CR02 -Not Used NOT USED 37338
CR03 -Not Used NOT USED 37338
CR04 -Not Used NOT USED 37338
CR05 -Not Used NOT USED 37338
CR06 -Not Used NOT USED 37338
CR07 -Not Used NOT USED 37338
CR08 -Not Used NOT USED 37338
CR09 QM64Diode, SMT, Ultra Fast, 1200V,15A, D2PAK STTH1512G(STATIC)(RoHS) ST Microelectronics
4QN91
CR10 QM55Diode,SMT,Fast Switching,80V,0.5A SOD-323 1N4448HWS-7-F(STATIC)(ROHS)
12060
CR11 QDZS01Diode,SMT,Zener,5.1V,5%,3W,SMB 1SMB5918BT3 04713
CR12 QDZS01Diode,SMT,Zener,5.1V,5%,3W,SMB 1SMB5918BT3 04713
CR13 QM55Diode,SMT,Fast Switching,80V,0.5A SOD-323 1N4448HWS-7-F(STATIC)(ROHS)
12060
CR14 QM55Diode,SMT,Fast Switching,80V,0.5A SOD-323 1N4448HWS-7-F(STATIC)(ROHS)
12060
CR15 QDZS01Diode,SMT,Zener,5.1V,5%,3W,SMB 1SMB5918BT3 04713
CR16 QM55Diode,SMT,Fast Switching,80V,0.5A SOD-323 1N4448HWS-7-F(STATIC)(ROHS)
12060
CR17 QDZS01Diode,SMT,Zener,5.1V,5%,3W,SMB 1SMB5918BT3 04713
CR18 QM55Diode,SMT,Fast Switching,80V,0.5A SOD-323 1N4448HWS-7-F(STATIC)(ROHS)
12060
Page 16 of 104 NAPA34A
Continued from previous page
NAPA34A Modulator/RF Amplifier PWBAssy, NX Series
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
CR19 QK50Diode,Schottky,600V,10A,SIC CSD10060A(STATIC) CREE INC
CR20 QK50Diode,Schottky,600V,10A,SIC CSD10060A(STATIC) CREE INC
CR21 QK50Diode,Schottky,600V,10A,SIC CSD10060A(STATIC) CREE INC
CR22 -Not Used NOT USED 37338
CR23 -Not Used NOT USED 37338
CR24 -Not Used NOT USED 37338
CR25 -Not Used NOT USED 37338
CR26 -Not Used NOT USED 37338
CR27 QM55Diode,SMT,Fast Switching,80V,0.5A SOD-323 1N4448HWS-7-F(STATIC)(ROHS)
12060
CR28 QM55Diode,SMT,Fast Switching,80V,0.5A SOD-323 1N4448HWS-7-F(STATIC)(ROHS)
12060
CR29 QM47Diode,SMT,Ultrafast,200V,1A,SMB MURS120T3 04713
CR30 -Not Used NOT USED 37338
CR31 -Not Used NOT USED 37338
CR32 -Not Used NOT USED 37338
CR33 -Not Used NOT USED 37338
CR34 -Not Used NOT USED 37338
CR35 -Not Used NOT USED 37338
CR36 -Not Used NOT USED 37338
CR37 -Not Used NOT USED 37338
CR38 QM71Diode, SMT Ultrafast, 600V, 1ASMA MURA160T3G(RoHS) 04713
CR39 QM71Diode, SMT Ultrafast, 600V, 1ASMA MURA160T3G(RoHS) 04713
CR40 QM71Diode, SMT Ultrafast, 600V, 1ASMA MURA160T3G(RoHS) 04713
DS01 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
F01 FA46Fuse,SMT,Fuse Block,3A VeryFast Acting,Installed 154 003(ROHS) 75915
J01 JM44Conn, Modular Jack, RJ45, Shld, Side, PWB, 50u 556591-1 09482
J02 JF47Conn, Header,Square Post,Gold,Dual,40-pin 4-102973-0 09482
L01 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L02 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L03 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L04 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L05 LCFS01Inductor, SMT, Choke, 600ohms,2A, 0805 ILHB0805RK601V 56845
L06 LS16Inductor,SMT,Pwr,Shielded DrumCore,P1167series, 2A, 10.0uH
P1167.103 01961
L07 LCFS01Inductor, SMT, Choke, 600ohms,2A, 0805 ILHB0805RK601V 56845
L08 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
Page 17 of 104 NAPA34A
Continued from previous page
NAPA34A Modulator/RF Amplifier PWBAssy, NX Series
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
L09 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L10 207-1053-03Inductor Assy, 207-1053-03 37338
L11 207-1053-03Inductor Assy, 207-1053-03 37338
L12 207-1053-01Inductor Assy 207-1053-01 37338
L13 207-1053-01Inductor Assy 207-1053-01 37338
L14 207-1053-01Inductor Assy 207-1053-01 37338
L15 LXP20Bead, Ferrite, 3.5mm, B Mtl 21-030-B 33062
Q01 QS25Transistor,SMT,MOSFET,N-Channel,100V,1.5A,SOT-223
IRLL110PbF(STATIC)(ROHS)
59993
Q02 QS25Transistor,SMT,MOSFET,N-Channel,100V,1.5A,SOT-223
IRLL110PbF(STATIC)(ROHS)
59993
Q03 QS25Transistor,SMT,MOSFET,N-Channel,100V,1.5A,SOT-223
IRLL110PbF(STATIC)(ROHS)
59993
Q04 QS25Transistor,SMT,MOSFET,N-Channel,100V,1.5A,SOT-223
IRLL110PbF(STATIC)(ROHS)
59993
Q05 QS25Transistor,SMT,MOSFET,N-Channel,100V,1.5A,SOT-223
IRLL110PbF(STATIC)(ROHS)
59993
Q06 QS25Transistor,SMT,MOSFET,N-Channel,100V,1.5A,SOT-223
IRLL110PbF(STATIC)(ROHS)
59993
Q07 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
Q08 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
Q09 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
Q10 +Installed at Next Higher Assy INSTALLED AT NEXT HIGHER ASSY
37338
Q11 QR75Transistor, FET, N, 500V, 30A,0.165 Ohm IXFH30N50P(STATIC)
Q12 QR75Transistor, FET, N, 500V, 30A,0.165 Ohm IXFH30N50P(STATIC)
Q13 QR75Transistor, FET, N, 500V, 30A,0.165 Ohm IXFH30N50P(STATIC)
R001 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R002 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R003 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R004 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R005 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R006 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R007 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R008 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R009 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R010 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R011 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R012 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R013 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R014 RAD17Resistor, SMT, MF, 221 Ohms,1% 1/4W RK73H2BL2210F 59124
Page 18 of 104 NAPA34A
Continued from previous page
NAPA34A Modulator/RF Amplifier PWBAssy, NX Series
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R015 RAD17Resistor, SMT, MF, 221 Ohms,1% 1/4W RK73H2BL2210F 59124
R016 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R017 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R018 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R019 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R020 RFFS56Resistor,SMT,MF,33.2Kohms,1%,1/10W,0603 RK73H1JLTD3322F 59124
R021 RFFS56Resistor,SMT,MF,33.2Kohms,1%,1/10W,0603 RK73H1JLTD3322F 59124
R022 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R023 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R024 RAD25Resistor, SMT, MF, 1000 Ohms,1% 1/4W RK73H2BL1001F 59124
R025 RFFS56Resistor,SMT,MF,33.2Kohms,1%,1/10W,0603 RK73H1JLTD3322F 59124
R026 RAD85ZResistor, SMT, 0 Ohms, 1%, 1W2512 CR2512-1W-000T-SP(RoHS)
R027 -Not Used NOT USED 37338
R028 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R029 -Not Used NOT USED 37338
R030 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R031 -Not Used NOT USED 37338
R032 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R033 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R034 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R035 RAD85ZResistor, SMT, 0 Ohms, 1%, 1W2512 CR2512-1W-000T-SP(RoHS)
R036 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R037 -Not Used NOT USED 37338
R038 -Not Used NOT USED 37338
R039 RAD49ZResistor,SMT,MF,10ohms,1%,2W CR2512-2W-10R0F-SP
VENKEL
R040 RAD50ZResistor,SMT,MF,20ohms,1%,2W CR2512-2W-20R0F-SP
VENKEL
R041 RAD50ZResistor,SMT,MF,20ohms,1%,2W CR2512-2W-20R0F-SP
VENKEL
R042 RAD50ZResistor,SMT,MF,20ohms,1%,2W CR2512-2W-20R0F-SP
VENKEL
R043 RAD25Resistor, SMT, MF, 1000 Ohms,1% 1/4W RK73H2BL1001F 59124
R044 RAD25Resistor, SMT, MF, 1000 Ohms,1% 1/4W RK73H2BL1001F 59124
R045 RAD25Resistor, SMT, MF, 1000 Ohms,1% 1/4W RK73H2BL1001F 59124
R046 RAD14Resistor, SMT, MF, 121 Ohms,1% 1/4W RK73H2BL1210F 59124
R047 RAD14Resistor, SMT, MF, 121 Ohms,1% 1/4W RK73H2BL1210F 59124
R048 RFFS44Resistor,SMT,MF,3320ohms,1%,1/10W,0603 RK73H1JLTD3321F 59124
R049 RFFS44Resistor,SMT,MF,3320ohms,1%,1/10W,0603 RK73H1JLTD3321F 59124
R050 RFFS44Resistor,SMT,MF,3320ohms,1%,1/10W,0603 RK73H1JLTD3321F 59124
Page 19 of 104 NAPA34A
Continued from previous page
NAPA34A Modulator/RF Amplifier PWBAssy, NX Series
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R051 RAE13Resistor, SMT, MF, 1.0M Ohms,1% 1/4W RK73H2BL1004F 59124
R052 RAE13Resistor, SMT, MF, 1.0M Ohms,1% 1/4W RK73H2BL1004F 59124
R053 RAE13Resistor, SMT, MF, 1.0M Ohms,1% 1/4W RK73H2BL1004F 59124
R054 RFFS62Resistor,SMT,MF,100Kohms,1%,1/10W,0603 RK73H1JLTD1003F 59124
R055 RAD50ZResistor,SMT,MF,20ohms,1%,2W CR2512-2W-20R0F-SP
VENKEL
R056 RAD50ZResistor,SMT,MF,20ohms,1%,2W CR2512-2W-20R0F-SP
VENKEL
R057 RAE13Resistor, SMT, MF, 1.0M Ohms,1% 1/4W RK73H2BL1004F 59124
R058 RAE13Resistor, SMT, MF, 1.0M Ohms,1% 1/4W RK73H2BL1004F 59124
R059 RAE13Resistor, SMT, MF, 1.0M Ohms,1% 1/4W RK73H2BL1004F 59124
R060 RFFS44Resistor,SMT,MF,3320ohms,1%,1/10W,0603 RK73H1JLTD3321F 59124
R061 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R062 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R063 RAE13Resistor, SMT, MF, 1.0M Ohms,1% 1/4W RK73H2BL1004F 59124
R064 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R065 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R066 RFFS83Resistor,SMT,MF,28.7 KOhms,1%,1/10W,0603 RK73H1JT2872F 59124
R067 RAE13Resistor, SMT, MF, 1.0M Ohms,1% 1/4W RK73H2BL1004F 59124
R068 RAE13Resistor, SMT, MF, 1.0M Ohms,1% 1/4W RK73H2BL1004F 59124
R069 RFFS83Resistor,SMT,MF,28.7 KOhms,1%,1/10W,0603 RK73H1JT2872F 59124
R070 RAD50ZResistor,SMT,MF,20ohms,1%,2W CR2512-2W-20R0F-SP
VENKEL
R071 RAD50ZResistor,SMT,MF,20ohms,1%,2W CR2512-2W-20R0F-SP
VENKEL
R072 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R073 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R074 RFFS62Resistor,SMT,MF,100Kohms,1%,1/10W,0603 RK73H1JLTD1003F 59124
R075 RFFS62Resistor,SMT,MF,100Kohms,1%,1/10W,0603 RK73H1JLTD1003F 59124
R076 RAD14Resistor, SMT, MF, 121 Ohms,1% 1/4W RK73H2BL1210F 59124
R077 RAD25Resistor, SMT, MF, 1000 Ohms,1% 1/4W RK73H2BL1001F 59124
R078 RFFS18Resistor,SMT,MF,22.1ohms,1%,1/10W,0603 RK73H1JLTD22R1F 59124
R079 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R080 -Not Used NOT USED 37338
R081 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R082 RFFS49Resistor,SMT,MF,8250ohms,1%,1/10W,0603 RK73H1JLTD8251F 59124
R083 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R084 RFFS44Resistor,SMT,MF,3320ohms,1%,1/10W,0603 RK73H1JLTD3321F 59124
R085 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R086 RFFS44Resistor,SMT,MF,3320ohms,1%,1/10W,0603 RK73H1JLTD3321F 59124
R087 RFFS40Resistor,SMT,MF,1500ohms,1%,1/10W,0603 RK73H1JLTD1501F 59124
Page 20 of 104 NAPA34A
Continued from previous page
NAPA34A Modulator/RF Amplifier PWBAssy, NX Series
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R088 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R089 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R090 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R091 RAD79Resistor, SMT, MF, 270 Ohms,1%, 1W 2512 ERJ-1TYF271U(RoHS)
R092 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R093 RFFS55Resistor,SMT,MF,27.4Kohms,1%,1/10W,0603 RK73H1JLTD2742F 59124
R094 RAD14Resistor, SMT, MF, 121 Ohms,1% 1/4W RK73H2BL1210F 59124
R095 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R096 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R097 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R098 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R099 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R100 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R101 RAD29Resistor, SMT, MF, 2210 Ohms,1% 1/4W RK73H2BL2211F 59124
R102 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R103 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R104 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R105 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R106 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R107 RAD50ZResistor,SMT,MF,20ohms,1%,2W CR2512-2W-20R0F-SP
VENKEL
R108 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R109 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R110 RAD81Resistor, SMT, Power, 5 ohms,1%, 5W HPC 12 5.0 1% R(RoHS)
1E4C5
R111 RAD81Resistor, SMT, Power, 5 ohms,1%, 5W HPC 12 5.0 1% R(RoHS)
1E4C5
R112 RAD49ZResistor,SMT,MF,10ohms,1%,2W CR2512-2W-10R0F-SP
VENKEL
R113 RAD81Resistor, SMT, Power, 5 ohms,1%, 5W HPC 12 5.0 1% R(RoHS)
1E4C5
R114 RAD81Resistor, SMT, Power, 5 ohms,1%, 5W HPC 12 5.0 1% R(RoHS)
1E4C5
R115 RAD25Resistor, SMT, MF, 1000 Ohms,1% 1/4W RK73H2BL1001F 59124
R116 RAD25Resistor, SMT, MF, 1000 Ohms,1% 1/4W RK73H2BL1001F 59124
R117 RAD25Resistor, SMT, MF, 1000 Ohms,1% 1/4W RK73H2BL1001F 59124
R118 RAD25Resistor, SMT, MF, 1000 Ohms,1% 1/4W RK73H2BL1001F 59124
R119 -Not Used NOT USED 37338
R120 -Not Used NOT USED 37338
R121 -Not Used NOT USED 37338
R122 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
Page 21 of 104 NAPA34A
Continued from previous page
NAPA34A Modulator/RF Amplifier PWBAssy, NX Series
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R123 RAD85ZResistor, SMT, 0 Ohms, 1%, 1W2512 CR2512-1W-000T-SP(RoHS)
R124 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R125 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R126 RAD49ZResistor,SMT,MF,10ohms,1%,2W CR2512-2W-10R0F-SP
VENKEL
R127 -Not Used NOT USED 37338
R128 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R129 -Not Used NOT USED 37338
R130 -Not Used NOT USED 37338
R131 -Not Used NOT USED 37338
R132 -Not Used NOT USED 37338
R133 -Not Used NOT USED 37338
R134 -Not Used NOT USED 37338
T01 LA39Toroid, Ferrite, Uncoated,22.1mmOD B64290-A719-X49 C4751
T02 LA39Toroid, Ferrite, Uncoated,22.1mmOD B64290-A719-X49 C4751
T03 LA39Toroid, Ferrite, Uncoated,22.1mmOD B64290-A719-X49 C4751
T04 LA39Toroid, Ferrite, Uncoated,22.1mmOD B64290-A719-X49 C4751
U01 UT91IC,SMT,Quad RS-422 Receiver,16-SOIC DS26C32ATM(STATIC)
NATIONAL
U02 UT137IC, SMT, Quad FET Driver, 2A, Non-inverting EL7457CLZ(RoSH)
U03 UD93IC, MOSFET, Gate Driver, 9A,20Vpk IN ZXGD3002E6(STATIC)(RoHS)
U04 UD93IC, MOSFET, Gate Driver, 9A,20Vpk IN ZXGD3002E6(STATIC)(RoHS)
U05 UD93IC, MOSFET, Gate Driver, 9A,20Vpk IN ZXGD3002E6(STATIC)(RoHS)
U06 -Not Used NOT USED 37338
U07 -Not Used NOT USED 37338
U08 -Not Used NOT USED 37338
U09 -Not Used NOT USED 37338
U10 -Not Used NOT USED 37338
U11 -Not Used NOT USED 37338
U12 -Not Used NOT USED 37338
U13 -Not Used NOT USED 37338
U14 -Not Used NOT USED 37338
U15 -Not Used NOT USED 37338
U16 -Not Used NOT USED 37338
U17 UP103Current Sensor, Hall, 50A,AC/DC, Bi Direc ACS756KCA-050B-PFF-T(Static)(RoHS) Allegro
U18 UT70IC, SMT, High Speed Comparator, SOIC-8 TL3016ID(STATIC) 01295
U19 -Not Used NOT USED 37338
Page 22 of 104 NAPA34A
Continued from previous page
NAPA34A Modulator/RF Amplifier PWBAssy, NX Series
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
U20 UDTS03IC,SMT,RS-485 Transceiver,Sgl,SOIC-8 DS36C278TM(STATIC)
27014
U21 ULAS02IC,SMT,Opamp,Quad,Rail-To-Rail,SOIC-14 TLV2374ID(STATIC) 01295
U22 UX184IC, SMT, Micro, ADC, PWM,TQFP-32, 16k Flash ATMEGA168-20AUR(RoHS)
U23 UT136IC, SMT, FET Driver, 14A, Non-inverting, TO-263 IXDD614YI(STATIC)(RoHS)
0A5K5
U24 UT136IC, SMT, FET Driver, 14A, Non-inverting, TO-263 IXDD614YI(STATIC)(RoHS)
0A5K5
U25 UD64IC,SMT,Single,2 InputExclusive OR,SOT23-5L 74V1G86STR(STATIC)(ROHS)
SCE76
U26 UT136IC, SMT, FET Driver, 14A, Non-inverting, TO-263 IXDD614YI(STATIC)(RoHS)
0A5K5
U27 UT91IC,SMT,Quad RS-422 Receiver,16-SOIC DS26C32ATM(STATIC)
NATIONAL
U28 UT93IC,SMT,Voltage Regulator,5V,1A, D2PAK L7805ABD2T-TR(STATIC)(ROHS)
ST MICRO
U29 UT136IC, SMT, FET Driver, 14A, Non-inverting, TO-263 IXDD614YI(STATIC)(RoHS)
0A5K5
U30 UD81IC, SMT, Delay Line, 5 Taps,20-100nS, SOIC8 (150mil) DS1100Z-100+(Static)(RoHS) Dallas
0B0A9
U31 UD82IC, SMT, 2-Input Logic, UHSUniv Config SC70-6 NC7SZ57P6X(Static)(RoHS)
07933
U32 UD82IC, SMT, 2-Input Logic, UHSUniv Config SC70-6 NC7SZ57P6X(Static)(RoHS)
07933
Y01 XFPS11Crystal, SMT, Fund, 11.0592MHz HCM49-11.0592MABJ-UT(RoHS)
3DX59
Page 23 of 104 NAPA34A
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
BT01 BBLT01Battery, Lithium, 3V,20mm Coin Cell CR2032 PANAS
C001 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C002 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C003 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C004 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C005 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C006 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C007 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C008 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C009 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C010 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C011 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C012 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C013 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C014 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C015 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C016 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C017 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C018 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C019 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C020 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C021 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C022 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C023 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C024 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C025 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C026 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C027 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C028 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C029 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C030 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C031 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C032 CCFS53Cap, SMT, Ceramic,47uF,20%,6.3V, 1210 C3225X5R0J476M(RoHS)
56289
C033 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C034 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C035 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C036 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C037 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
Page 24 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C038 CCFS53Cap, SMT, Ceramic,47uF,20%,6.3V, 1210 C3225X5R0J476M(RoHS)
56289
C039 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C040 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C041 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C042 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C043 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C044 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C045 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C046 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C047 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C048 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C049 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C050 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C051 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C052 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C053 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C054 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C055 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C056 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C057 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C058 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C059 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C060 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C061 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C062 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C063 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C064 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C065 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C066 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C067 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C068 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C069 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C070 CCFS53Cap, SMT, Ceramic,47uF,20%,6.3V, 1210 C3225X5R0J476M(RoHS)
56289
C071 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C072 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C073 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C074 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C075 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
Page 25 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C076 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C077 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C078 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C079 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C080 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C081 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C082 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C083 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C084 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C085 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C086 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C087 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C088 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C089 CCFS53Cap, SMT, Ceramic,47uF,20%,6.3V, 1210 C3225X5R0J476M(RoHS)
56289
C090 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C091 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C092 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C093 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C094 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C095 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C096 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C097 CCFS01Cap,SMT,Ceramic,0.001uF,10%,50V,X7R,0603 C0603C102K5RAC 31433
C098 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C099 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C100 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C101 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C102 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C103 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C104 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C105 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C106 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C107 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C108 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C109 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C110 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C111 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C112 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C113 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C114 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
Page 26 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C115 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C116 CCFS03Cap,SMT,Ceramic,0.0047uF,10%,50V,X7R,0603 C0603C472K5RAC 31433
C117 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C118 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C119 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C120 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C121 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C122 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C123 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C124 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C125 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C126 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C127 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C128 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C129 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C130 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C131 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C132 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C133 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C134 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C135 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C136 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C137 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C138 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C139 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C140 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C141 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C142 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C143 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C144 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C145 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C146 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C147 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C148 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C149 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C150 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C151 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C152 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C153 CCFS23Cap,SMT,Ceramic,18pF,2%,50V,C0G,0603 C0603C180G5GAC 31433
Page 27 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C154 CCFS62Cap, SMT, Ceramic, 10uF, 10%,25V C3225X5R1E106K
C155 CCFS23Cap,SMT,Ceramic,18pF,2%,50V,C0G,0603 C0603C180G5GAC 31433
C156 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C157 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C158 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C159 CCFS62Cap, SMT, Ceramic, 10uF, 10%,25V C3225X5R1E106K
C160 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C161 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C162 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C163 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C164 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C165 CCFS34Cap,SMT,Ceramic,220pF,2%,50V,C0G,0603 C0603C221G5GAC 31433
C166 CCFS34Cap,SMT,Ceramic,220pF,2%,50V,C0G,0603 C0603C221G5GAC 31433
C167 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C168 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C169 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C170 CCFS53Cap, SMT, Ceramic,47uF,20%,6.3V, 1210 C3225X5R0J476M(RoHS)
56289
C171 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C172 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C173 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C174 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C175 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C176 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C177 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C178 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C179 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C180 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C181 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C182 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C183 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C184 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C185 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C186 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C187 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C188 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C189 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C190 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C191 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C192 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
Page 28 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C193 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C194 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C195 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C196 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C197 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C198 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C199 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C200 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C201 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C202 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C203 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C204 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C205 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C206 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C207 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C208 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C209 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C210 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C211 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C212 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C213 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C214 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C215 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C216 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C217 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C218 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C219 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C220 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C221 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C222 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C223 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C224 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C225 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C226 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C227 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C228 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C229 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C230 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C231 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
Page 29 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C232 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C233 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C234 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C235 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C236 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C237 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C238 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C239 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C240 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C241 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C242 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C243 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C244 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C245 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C246 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C247 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C248 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C249 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C250 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C251 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C252 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C253 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C254 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C255 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C256 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C257 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C258 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C259 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C260 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C261 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C262 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C263 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C264 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C265 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C266 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C267 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C268 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C269 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C270 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
Page 30 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C271 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C272 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C273 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C274 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C275 -Not Used NOT USED 37338
C276 -Not Used NOT USED 37338
C277 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
CR01 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR02 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR03 QDZ01Diode, SMT, Zener, 5.6V, 5%,3W, SMB 1SMB5919BT3 04713
CR04 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR05 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR06 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR07 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR08 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR09 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR10 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR11 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR12 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR13 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR14 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR15 QK53Diode, SMT, Shottky, 70V, 15mA, SOD-123 1N5711W-7-F(STATIC)(RoHS)
12060
CR16 QK53Diode, SMT, Shottky, 70V, 15mA, SOD-123 1N5711W-7-F(STATIC)(RoHS)
12060
CR17 QK53Diode, SMT, Shottky, 70V, 15mA, SOD-123 1N5711W-7-F(STATIC)(RoHS)
12060
CR18 QK53Diode, SMT, Shottky, 70V, 15mA, SOD-123 1N5711W-7-F(STATIC)(RoHS)
12060
CR19 QK53Diode, SMT, Shottky, 70V, 15mA, SOD-123 1N5711W-7-F(STATIC)(RoHS)
12060
CR20 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR21 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR22 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR23 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR24 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR25 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
Page 31 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
CR26 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR27 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR28 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR29 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR30 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR31 QDZS04Diode,SMT,Zener,39V,5%,3W,SMB 1SMB5939BT3 04713
CR32 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR33 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR34 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR35 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR36 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR37 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR38 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR39 QDSS01Diode,SMT,Schottky,30V,0.2A,SOD-323 BAT54HT1(STATIC) 04713
CR40 QDSS01Diode,SMT,Schottky,30V,0.2A,SOD-323 BAT54HT1(STATIC) 04713
CR41 QM48Diode,SMT,Transient Suppr,10V,SMB 1SMB10CAT3 04713
CR42 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR43 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR44 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR45 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR46 QM48Diode,SMT,Transient Suppr,10V,SMB 1SMB10CAT3 04713
CR47 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR48 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR49 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR50 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR51 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR52 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR53 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR54 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR55 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR56 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR57 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR58 QDZS04Diode,SMT,Zener,39V,5%,3W,SMB 1SMB5939BT3 04713
CR59 QDZS04Diode,SMT,Zener,39V,5%,3W,SMB 1SMB5939BT3 04713
Page 32 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
CR60 QDZS04Diode,SMT,Zener,39V,5%,3W,SMB 1SMB5939BT3 04713
CR61 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR62 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR63 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR64 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR65 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR66 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR67 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR68 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR69 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR70 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR71 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR72 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR73 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR74 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR75 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR76 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR77 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR78 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR79 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
CR80 QR70Suppressor, Transient Voltage,SMT 60V Clamp 0603ESDA-TR1(RoHS)
71400
DS01 QDLS07Diode, SMT, LED, Amber,(592nm), 0603 598-8040-107F(STATIC)(RoHS)
83330
DS02 QDLS07Diode, SMT, LED, Amber,(592nm), 0603 598-8040-107F(STATIC)(RoHS)
83330
DS03 QDLS07Diode, SMT, LED, Amber,(592nm), 0603 598-8040-107F(STATIC)(RoHS)
83330
DS04 QDLS07Diode, SMT, LED, Amber,(592nm), 0603 598-8040-107F(STATIC)(RoHS)
83330
DS05 QDLS07Diode, SMT, LED, Amber,(592nm), 0603 598-8040-107F(STATIC)(RoHS)
83330
DS06 QDLS07Diode, SMT, LED, Amber,(592nm), 0603 598-8040-107F(STATIC)(RoHS)
83330
DS07 QDLS03Diode, SMT, LED, Red, (660nm),0603 597-5112-402(STATIC)
83330
DS08 QDLS01Diode, SMT, LED, Green,(560nm), 0603 597-5312-402F(STATIC)(RoHS)
83330
DS09 QDLS01Diode, SMT, LED, Green,(560nm), 0603 597-5312-402F(STATIC)(RoHS)
83330
DS10 QDLS01Diode, SMT, LED, Green,(560nm), 0603 597-5312-402F(STATIC)(RoHS)
83330
DS11 QDLS01Diode, SMT, LED, Green,(560nm), 0603 597-5312-402F(STATIC)(RoHS)
83330
Page 33 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
DS12 QDLS01Diode, SMT, LED, Green,(560nm), 0603 597-5312-402F(STATIC)(RoHS)
83330
DS13 QDLS01Diode, SMT, LED, Green,(560nm), 0603 597-5312-402F(STATIC)(RoHS)
83330
DS14 QDLS01Diode, SMT, LED, Green,(560nm), 0603 597-5312-402F(STATIC)(RoHS)
83330
DS15 QDLS01Diode, SMT, LED, Green,(560nm), 0603 597-5312-402F(STATIC)(RoHS)
83330
DS16 QDLS01Diode, SMT, LED, Green,(560nm), 0603 597-5312-402F(STATIC)(RoHS)
83330
DS17 QDLS01Diode, SMT, LED, Green,(560nm), 0603 597-5312-402F(STATIC)(RoHS)
83330
DS18 QDLS01Diode, SMT, LED, Green,(560nm), 0603 597-5312-402F(STATIC)(RoHS)
83330
E01 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
E02 -Not Used NOT USED 37338
E03 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
J01 JS12Conn, Plug, D-Sub, 25 pin, PWB Mt K22X-B25P-NJ 63590
J02 JQ34Conn, Socket, D-Sub, 9 pin, PWB Mt K22-E9S-NJ KYCON
J03 JT121Conn, Dual, D-Sub, F/M, 9 pin, Rt. Angle, PWB 178-009-313R571(RoHS)
1L3S8
J04 -Not Used NOT USED 37338
J05 JS13Conn, Socket, D-Sub, 25 pin, PWB Mt K22-B25S-NJ 22421
J06 -Not Used NOT USED 37338
J07 JT61Conn, BNC, Recept, 50ohm,Insul, Rt Angle 227161-6 09482
J08 JT61Conn, BNC, Recept, 50ohm,Insul, Rt Angle 227161-6 09482
J09 -Not Used NOT USED 37338
J10 JT87Conn,3-pin,PWB Mount, Fem, XLR NC3FAH-2 NEUTRIK A
J11 JT87Conn,3-pin,PWB Mount, Fem, XLR NC3FAH-2 NEUTRIK A
J12 JT87Conn,3-pin,PWB Mount, Fem, XLR NC3FAH-2 NEUTRIK A
J13 JQ34Conn, Socket, D-Sub, 9 pin, PWB Mt K22-E9S-NJ KYCON
J14 JT90Connector,Modular,2x4,RJ45,Jack 569262-1 AMP/TYCO
J15 JT90Connector,Modular,2x4,RJ45,Jack 569262-1 AMP/TYCO
J16 JS13Conn, Socket, D-Sub, 25 pin, PWB Mt K22-B25S-NJ 22421
J17 JS12Conn, Plug, D-Sub, 25 pin, PWB Mt K22X-B25P-NJ 63590
J18 JS13Conn, Socket, D-Sub, 25 pin, PWB Mt K22-B25S-NJ 22421
J19 JS12Conn, Plug, D-Sub, 25 pin, PWB Mt K22X-B25P-NJ 63590
J20 JM44Conn, Modular Jack, RJ45, Shld, Side, PWB, 50u 556591-1 09482
J21 JQ54Conn, Header, Ribbon Cbl, 10-Pin 103308-1 00779
J22 JT99Connector, Dual, D-Sub, F/F,9 pin, Rt. Angle, PWB 1734285-3(RoHS) 09482
J23 JS13Conn, Socket, D-Sub, 25 pin, PWB Mt K22-B25S-NJ 22421
J24 JS12Conn, Plug, D-Sub, 25 pin, PWB Mt K22X-B25P-NJ 63590
J25 JF47Conn, Header,Square Post,Gold,Dual,40-pin 4-102973-0 09482
Page 34 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
J26 JF47Conn, Header,Square Post,Gold,Dual,40-pin 4-102973-0 09482
J27 JM44Conn, Modular Jack, RJ45, Shld, Side, PWB, 50u 556591-1 09482
L01 LA16Inductor, Choke, 2.5 Turns, JMtl 82-152-J 33062
L02 LA16Inductor, Choke, 2.5 Turns, JMtl 82-152-J 33062
L03 LA16Inductor, Choke, 2.5 Turns, JMtl 82-152-J 33062
L04 LA16Inductor, Choke, 2.5 Turns, JMtl 82-152-J 33062
L05 LA16Inductor, Choke, 2.5 Turns, JMtl 82-152-J 33062
L06 LA16Inductor, Choke, 2.5 Turns, JMtl 82-152-J 33062
L07 LA16Inductor, Choke, 2.5 Turns, JMtl 82-152-J 33062
L08 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L09 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L10 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L11 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L12 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L13 LA16Inductor, Choke, 2.5 Turns, JMtl 82-152-J 33062
L14 LCFS01Inductor, SMT, Choke, 600ohms,2A, 0805 ILHB0805RK601V 56845
L15 LCFS01Inductor, SMT, Choke, 600ohms,2A, 0805 ILHB0805RK601V 56845
L16 LCFS01Inductor, SMT, Choke, 600ohms,2A, 0805 ILHB0805RK601V 56845
L17 LA16Inductor, Choke, 2.5 Turns, JMtl 82-152-J 33062
LS01 LP30Alarm, Audio Piezoelectric,Sonalert MSR516N 90201
Q01 QBNS01Transistor,SMT,NPN,Switch/Amp,SOT-23 MMBT4401LT1(STATIC)
04713
Q02 -Not Used NOT USED 37338
Q03 -Not Used NOT USED 37338
R001 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R002 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R003 -Not Used NOT USED 37338
R004 RAE02Resistor, SMT, MF, 121K Ohms,1% 1/4W RK73H2BL1213F 59124
R005 RAE02Resistor, SMT, MF, 121K Ohms,1% 1/4W RK73H2BL1213F 59124
R006 RFFS37Resistor,SMT,MF,825ohms,1%,1/10W,0603 RK73H1JLTD8250F 59124
R007 RAE02Resistor, SMT, MF, 121K Ohms,1% 1/4W RK73H2BL1213F 59124
R008 RAE02Resistor, SMT, MF, 121K Ohms,1% 1/4W RK73H2BL1213F 59124
R009 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R010 RFFS36Resistor,SMT,MF,681ohms,1%,1/10W,0603 RK73H1JLTD6810F 59124
R011 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R012 RFFS36Resistor,SMT,MF,681ohms,1%,1/10W,0603 RK73H1JLTD6810F 59124
R013 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
Page 35 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R014 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R015 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R016 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R017 -Not Used NOT USED 37338
R018 -Not Used NOT USED 37338
R019 RFFS60Resistor,SMT,MF,68.1Kohms,1%,1/10W,0603 RK73H1JLTD6812F 59124
R020 RFFS48Resistor,SMT,MF,6810ohms,1%,1/10W,0603 RK73H1JLTD6811F 59124
R021 -Not Used NOT USED 37338
R022 -Not Used NOT USED 37338
R023 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R024 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R025 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R026 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R027 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R028 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R029 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R030 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R031 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R032 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R033 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R034 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R035 RFFS74Resistor,SMT,MF,1.00Mohms,1%,1/10W,0603 RK73H1JLTD1004F 59124
R036 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R037 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R038 RFFS74Resistor,SMT,MF,1.00Mohms,1%,1/10W,0603 RK73H1JLTD1004F 59124
R039 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R040 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R041 RFFS74Resistor,SMT,MF,1.00Mohms,1%,1/10W,0603 RK73H1JLTD1004F 59124
R042 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R043 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R044 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R045 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R046 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R047 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R048 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R049 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R050 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R051 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R052 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
Page 36 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R053 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R054 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R055 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R056 RFFS74Resistor,SMT,MF,1.00Mohms,1%,1/10W,0603 RK73H1JLTD1004F 59124
R057 RFFS74Resistor,SMT,MF,1.00Mohms,1%,1/10W,0603 RK73H1JLTD1004F 59124
R058 RFFS74Resistor,SMT,MF,1.00Mohms,1%,1/10W,0603 RK73H1JLTD1004F 59124
R059 RFFS74Resistor,SMT,MF,1.00Mohms,1%,1/10W,0603 RK73H1JLTD1004F 59124
R060 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R061 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R062 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R063 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R064 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R065 RFFS74Resistor,SMT,MF,1.00Mohms,1%,1/10W,0603 RK73H1JLTD1004F 59124
R066 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R067 RFFS74Resistor,SMT,MF,1.00Mohms,1%,1/10W,0603 RK73H1JLTD1004F 59124
R068 RFFS37Resistor,SMT,MF,825ohms,1%,1/10W,0603 RK73H1JLTD8250F 59124
R069 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R070 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R071 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R072 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R073 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R074 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R075 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R076 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R077 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R078 RW39Resistor, Variable, Film, 10Kohms, 1/2W 3299W-1-103 80294
R079 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R080 RFFS52Resistor,SMT,MF,15.0Kohms,1%,1/10W,0603 RK73H1JLTD1502F 59124
R081 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R082 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R083 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R084 -Not Used NOT USED 37338
R085 RFFS44Resistor,SMT,MF,3320ohms,1%,1/10W,0603 RK73H1JLTD3321F 59124
R086 -Not Used NOT USED 37338
R087 -Not Used NOT USED 37338
R088 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R089 RFFS22Resistor,SMT,MF,47.5ohms,1%,1/10W,0603 RK73H1JLTD47R5F 59124
R090 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R091 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
Page 37 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R092 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R093 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R094 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R095 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R096 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R097 -Not Used NOT USED 37338
R098 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R099 RAD31Resistor, SMT, MF, 3320 Ohms,1% 1/4W RK73H2BL3321F 59124
R100 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R101 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R102 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R103 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R104 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R105 RAD49ZResistor,SMT,MF,10ohms,1%,2W CR2512-2W-10R0F-SP
VENKEL
R106 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R107 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R108 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R109 -Not Used NOT USED 37338
R110 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R111 RFFS37Resistor,SMT,MF,825ohms,1%,1/10W,0603 RK73H1JLTD8250F 59124
R112 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R113 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R114 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R115 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R116 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R117 RAD50ZResistor,SMT,MF,20ohms,1%,2W CR2512-2W-20R0F-SP
VENKEL
R118 RAD50ZResistor,SMT,MF,20ohms,1%,2W CR2512-2W-20R0F-SP
VENKEL
R119 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R120 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R121 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R122 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R123 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R124 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R125 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R126 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R127 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R128 -Not Used NOT USED 37338
R129 RFFS39Resistor,SMT,MF,1210ohms,1%,1/10W,0603 RK73H1JLTD1211F 59124
Page 38 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R130 RT20Resistor,SMT,49.9 Ohms, 1% RK73H2ET49R9F 59124
R131 RT20Resistor,SMT,49.9 Ohms, 1% RK73H2ET49R9F 59124
R132 RT20Resistor,SMT,49.9 Ohms, 1% RK73H2ET49R9F 59124
R133 RT20Resistor,SMT,49.9 Ohms, 1% RK73H2ET49R9F 59124
R134 RFFS27Resistor,SMT,MF,121ohms,1%,1/10W,0603 RK73H1JLTD1210F 59124
R135 RFFS25Resistor,SMT,MF,82.5ohms,1%,1/10W,0603 RK73H1JLTD82R5F 59124
R136 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R137 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R138 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R139 RFFS62Resistor,SMT,MF,100Kohms,1%,1/10W,0603 RK73H1JLTD1003F 59124
R140 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R141 RT20Resistor,SMT,49.9 Ohms, 1% RK73H2ET49R9F 59124
R142 RT20Resistor,SMT,49.9 Ohms, 1% RK73H2ET49R9F 59124
R143 RT20Resistor,SMT,49.9 Ohms, 1% RK73H2ET49R9F 59124
R144 RT20Resistor,SMT,49.9 Ohms, 1% RK73H2ET49R9F 59124
R145 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R146 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R147 RFFS27Resistor,SMT,MF,121ohms,1%,1/10W,0603 RK73H1JLTD1210F 59124
R148 -Not Used NOT USED 37338
R149 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R150 RAD31Resistor, SMT, MF, 3320 Ohms,1% 1/4W RK73H2BL3321F 59124
R151 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R152 RFFS39Resistor,SMT,MF,1210ohms,1%,1/10W,0603 RK73H1JLTD1211F 59124
R153 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R154 RFFS39Resistor,SMT,MF,1210ohms,1%,1/10W,0603 RK73H1JLTD1211F 59124
R155 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R156 RAD31Resistor, SMT, MF, 3320 Ohms,1% 1/4W RK73H2BL3321F 59124
R157 RFFS62Resistor,SMT,MF,100Kohms,1%,1/10W,0603 RK73H1JLTD1003F 59124
R158 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R159 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R160 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R161 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R162 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R163 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R164 RFFS18Resistor,SMT,MF,22.1ohms,1%,1/10W,0603 RK73H1JLTD22R1F 59124
R165 RFFS18Resistor,SMT,MF,22.1ohms,1%,1/10W,0603 RK73H1JLTD22R1F 59124
R166 RFFS18Resistor,SMT,MF,22.1ohms,1%,1/10W,0603 RK73H1JLTD22R1F 59124
R167 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R168 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
Page 39 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R169 RFFS55Resistor,SMT,MF,27.4Kohms,1%,1/10W,0603 RK73H1JLTD2742F 59124
R170 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R171 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R172 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R173 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R174 RFFS27Resistor,SMT,MF,121ohms,1%,1/10W,0603 RK73H1JLTD1210F 59124
R175 RFFS39Resistor,SMT,MF,1210ohms,1%,1/10W,0603 RK73H1JLTD1211F 59124
R176 RAD13Resistor, SMT, MF, 100 Ohms,1% 1/4W RK73H2BL1000F 59124
R177 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R178 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R179 RAD13Resistor, SMT, MF, 100 Ohms,1% 1/4W RK73H2BL1000F 59124
R180 RAD55ZResistor,SMT,150 Ohms,,1%,2W CR2512-2W-1500F-SP
3EQW4
R181 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R182 RFFS36Resistor,SMT,MF,681ohms,1%,1/10W,0603 RK73H1JLTD6810F 59124
R183 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R184 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R185 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R186 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R187 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R188 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R189 RFFS36Resistor,SMT,MF,681ohms,1%,1/10W,0603 RK73H1JLTD6810F 59124
R190 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R191 RFFS42Resistor,SMT,MF,2210ohms,1%,1/10W,0603 RK73H1JLTD2211F 59124
R192 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R193 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R194 RFFS42Resistor,SMT,MF,2210ohms,1%,1/10W,0603 RK73H1JLTD2211F 59124
R195 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R196 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R197 RFFS36Resistor,SMT,MF,681ohms,1%,1/10W,0603 RK73H1JLTD6810F 59124
R198 RFFS35Resistor,SMT,MF,562ohms,1%,1/10W,0603 RK73H1JLTD5620F 59124
R199 RFFS36Resistor,SMT,MF,681ohms,1%,1/10W,0603 RK73H1JLTD6810F 59124
R200 RFFS35Resistor,SMT,MF,562ohms,1%,1/10W,0603 RK73H1JLTD5620F 59124
R201 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R202 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R203 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R204 RFFS51Resistor,SMT,MF,12.1Kohms,1%,1/10W,0603 RK73H1JLTD1212F 59124
R205 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R206 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R207 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
Page 40 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R208 RAD25Resistor, SMT, MF, 1000 Ohms,1% 1/4W RK73H2BL1001F 59124
R209 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R210 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R211 RFFS31Resistor,SMT,MF,274ohms,1%,1/10W,0603 RK73H1JLTD2740F 59124
R212 -Not Used NOT USED 37338
R213 RAD25Resistor, SMT, MF, 1000 Ohms,1% 1/4W RK73H2BL1001F 59124
R214 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R215 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R216 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R217 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R218 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R219 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R220 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R221 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R222 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R223 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R224 RFFS44Resistor,SMT,MF,3320ohms,1%,1/10W,0603 RK73H1JLTD3321F 59124
R225 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R226 RFFS44Resistor,SMT,MF,3320ohms,1%,1/10W,0603 RK73H1JLTD3321F 59124
R227 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R228 -Not Used NOT USED 37338
R229 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R230 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R231 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R232 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R233 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R234 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R235 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R236 RFFS36Resistor,SMT,MF,681ohms,1%,1/10W,0603 RK73H1JLTD6810F 59124
R237 RAD17Resistor, SMT, MF, 221 Ohms,1% 1/4W RK73H2BL2210F 59124
R238 RFFS36Resistor,SMT,MF,681ohms,1%,1/10W,0603 RK73H1JLTD6810F 59124
R239 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R240 RAD17Resistor, SMT, MF, 221 Ohms,1% 1/4W RK73H2BL2210F 59124
R241 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R242 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R243 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R244 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R245 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R246 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
Page 41 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R247 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R248 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R249 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R250 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R251 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R252 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R253 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R254 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R255 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R256 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R257 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R258 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R259 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R260 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R261 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R262 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R263 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R264 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R265 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R266 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R267 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R268 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R269 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R270 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R271 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R272 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R273 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R274 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R275 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R276 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R277 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R278 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R279 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R280 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R281 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R282 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R283 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R284 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R285 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
Page 42 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R286 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R287 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R288 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R289 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R290 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R291 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R292 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R293 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R294 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R295 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R296 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R297 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R298 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R299 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R300 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R301 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R302 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R303 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R304 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R305 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R306 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R307 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R308 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R309 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R310 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R311 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R312 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R313 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R314 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R315 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R316 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R317 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R318 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R319 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R320 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R321 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R322 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R323 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R324 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
Page 43 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R325 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R326 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R327 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R328 RAD33Resistor, SMT, MF, 4750 Ohms,1%, 1/4W RK73H2BL4751F 59124
R329 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R330 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R331 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R332 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R333 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R334 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R335 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R336 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R337 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R338 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R339 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R340 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R341 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R342 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R343 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R344 RFFS15Resistor,SMT,MF,12.1ohms,1%,1/10W,0603 RK73H1JLTD12R1F 59124
R345 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R346 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R347 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R348 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R349 RAD52Resistor,2512 SMT,100 ohms,1%,1W, ERJ-1TYF101U PANAS
R350 RAD52Resistor,2512 SMT,100 ohms,1%,1W, ERJ-1TYF101U PANAS
R351 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R352 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R353 -Not Used NOT USED 37338
R354 -Not Used NOT USED 37338
R355 -Not Used NOT USED 37338
R356 -Not Used NOT USED 37338
R357 RAD25Resistor, SMT, MF, 1000 Ohms,1% 1/4W RK73H2BL1001F 59124
R358 -Not Used NOT USED 37338
R359 RAD25Resistor, SMT, MF, 1000 Ohms,1% 1/4W RK73H2BL1001F 59124
R360 -Not Used NOT USED 37338
R361 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
RT01 RT17Thermistor, PTC, .15-.25 Ohms, 1.1A Hold RXE110 06090
RT02 RT17Thermistor, PTC, .15-.25 Ohms, 1.1A Hold RXE110 06090
Page 44 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
RT03 RT16Thermistor, PTC, .50-.77 Ohms, 0.5A Hold RXE050 06090
RT04 RT17Thermistor, PTC, .15-.25 Ohms, 1.1A Hold RXE110 06090
S01 SD77Switch, SMT, SPST, Momentary,w/ESD gnd B3SN-3112P(RoHS) 34361
S02 SD77Switch, SMT, SPST, Momentary,w/ESD gnd B3SN-3112P(RoHS) 34361
S03 SD77Switch, SMT, SPST, Momentary,w/ESD gnd B3SN-3112P(RoHS) 34361
S04 SD77Switch, SMT, SPST, Momentary,w/ESD gnd B3SN-3112P(RoHS) 34361
S05 SD07Switch, Slide, DPDT, ON, ON MHS-222 95146
S06 SD77Switch, SMT, SPST, Momentary,w/ESD gnd B3SN-3112P(RoHS) 34361
S07 SD77Switch, SMT, SPST, Momentary,w/ESD gnd B3SN-3112P(RoHS) 34361
T01 TZ88Transformer,SMT,50 ohms,0.03to 125MHz ADT1-6T+(ROHS) MINI-CIRC
T02 TZ88Transformer,SMT,50 ohms,0.03to 125MHz ADT1-6T+(ROHS) MINI-CIRC
T03 TZ74Transformer, Gate Drive, HighFreq P0584 01961
T04 -Not Used NOT USED 37338
T05 TE22Transmformer RF, 4:1, 0.03 to75 MHz, Gull Wing T16-6T-KK81+(RoHS) 15542
T06 -Not Used NOT USED 37338
T07 TE22Transmformer RF, 4:1, 0.03 to75 MHz, Gull Wing T16-6T-KK81+(RoHS) 15542
T08 TZ74Transformer, Gate Drive, HighFreq P0584 01961
TB01 JR50Terminal Block,5mm,3-pos,PWBMt,Green 282836-3 5Y407
TP01 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP08 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP12 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP13 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP14 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP15 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP16 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP17 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP19 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
Page 45 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
TP20 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP32 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP36 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP38 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP39 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP43 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP44 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
U01 UDTS05IC,SMT,RS-232 Transceiver,3.3V,SO-16 ADM3202ARN(STATIC)
45496
U02 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U03 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U04 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U05 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U06 UD68IC,SMT,Optocoupler,High CMR &Speed Gull Wing 6N137-300E(STATIC)(ROHS) AVAGO TECHNOLOGIES
AVAGO
U07 UD68IC,SMT,Optocoupler,High CMR &Speed Gull Wing 6N137-300E(STATIC)(ROHS) AVAGO TECHNOLOGIES
AVAGO
U08 UT73IC,DC-DC Converter,3kV ISO,5V-5V,1W NMV0505SA(STATIC) C&D
U09 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U10 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U11 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U12 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U13 UT70IC, SMT, High Speed Comparator, SOIC-8 TL3016ID(STATIC) 01295
U14 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U15 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
Page 46 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
U16 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U17 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U18 UD70IC,SMT,Quad 2-input AND gate,SO-14 MC74ACT08D(STATIC)
ON SEMI
U19 UD67IC,SMT,Quad 2 to 1 DATA Sel/Mux 3 States Outputs,5V SN74HC257PW(STATIC)(ROHS)
TEXAS
U20 UD82IC, SMT, 2-Input Logic, UHSUniv Config SC70-6 NC7SZ57P6X(Static)(RoHS)
07933
U21 UW90IC,SMT,Quad 2 TO 1 DATA Sel/Mux 3 States Output,3.3V
74LVC257APW(STATIC)(ROHS) NXP SEMICONDUCTOR
NXP SEMI
U22 UW90IC,SMT,Quad 2 TO 1 DATA Sel/Mux 3 States Output,3.3V
74LVC257APW(STATIC)(ROHS) NXP SEMICONDUCTOR
NXP SEMI
U23 UW90IC,SMT,Quad 2 TO 1 DATA Sel/Mux 3 States Output,3.3V
74LVC257APW(STATIC)(ROHS) NXP SEMICONDUCTOR
NXP SEMI
U24 UW90IC,SMT,Quad 2 TO 1 DATA Sel/Mux 3 States Output,3.3V
74LVC257APW(STATIC)(ROHS) NXP SEMICONDUCTOR
NXP SEMI
U25 UDTS05IC,SMT,RS-232 Transceiver,3.3V,SO-16 ADM3202ARN(STATIC)
45496
U26 UDLS05IC,SMT,CMOS,8-Bit Shft Reg,Par O/P, SOIC-16 MC74HC595AD(STATIC)
04713
U27 UDLS05IC,SMT,CMOS,8-Bit Shft Reg,Par O/P, SOIC-16 MC74HC595AD(STATIC)
04713
U28 ULCS01IC,SMT,Comparator,Quad,SOIC-14 MC3302D(STATIC) 04713
U29 ULCS01IC,SMT,Comparator,Quad,SOIC-14 MC3302D(STATIC) 04713
U30 ULCS01IC,SMT,Comparator,Quad,SOIC-14 MC3302D(STATIC) 04713
U31 UT70IC, SMT, High Speed Comparator, SOIC-8 TL3016ID(STATIC) 01295
U32 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U33 UX87IC,SMT,Digital Pot,Quad,20K,TSSOP-24 AD5263BRU20(STATIC)
45496
U34 UT110IC, Voltage Regulator, 1.5A,ADJ, Low Drop LP38500TS-ADJ(STATIC) National
27014
U35 UW90IC,SMT,Quad 2 TO 1 DATA Sel/Mux 3 States Output,3.3V
74LVC257APW(STATIC)(ROHS) NXP SEMICONDUCTOR
NXP SEMI
U36 UD71IC,SMT,OP-AMP,Dual,CurrentFeedback,SO-8 OPA2691ID(STATIC) TEXAS
U37 UT70IC, SMT, High Speed Comparator, SOIC-8 TL3016ID(STATIC) 01295
U38 UW90IC,SMT,Quad 2 TO 1 DATA Sel/Mux 3 States Output,3.3V
74LVC257APW(STATIC)(ROHS) NXP SEMICONDUCTOR
NXP SEMI
U39 UW90IC,SMT,Quad 2 TO 1 DATA Sel/Mux 3 States Output,3.3V
74LVC257APW(STATIC)(ROHS) NXP SEMICONDUCTOR
NXP SEMI
U40 UDTS03IC,SMT,RS-485 Transceiver,Sgl,SOIC-8 DS36C278TM(STATIC)
27014
Page 47 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
U41 UD71IC,SMT,OP-AMP,Dual,CurrentFeedback,SO-8 OPA2691ID(STATIC) TEXAS
U42 UDOS01IC,SMT,Dual Optocoupler,SOIC-8 MOCD223-M(STATIC) 7D893
U43 UDLS10IC,SMT,CMOS,Quad 2-Input NANDGate,SO-14 MM74HC00M(STATIC)
07263
U44 UP70IC, SMT, Voltage Regulator,-5V, DPAK MC79M05BDT(STATIC)
ON SEMI
U45 UT91IC,SMT,Quad RS-422 Receiver,16-SOIC DS26C32ATM(STATIC)
NATIONAL
U46 UW90IC,SMT,Quad 2 TO 1 DATA Sel/Mux 3 States Output,3.3V
74LVC257APW(STATIC)(ROHS) NXP SEMICONDUCTOR
NXP SEMI
U47 UDAS01IC,SMT,Trans Array, 7 Darl.,SOIC-16 MC1413BD(STATIC) 04713
U48 UT91IC,SMT,Quad RS-422 Receiver,16-SOIC DS26C32ATM(STATIC)
NATIONAL
U49 UD82IC, SMT, 2-Input Logic, UHSUniv Config SC70-6 NC7SZ57P6X(Static)(RoHS)
07933
U50 UDOS01IC,SMT,Dual Optocoupler,SOIC-8 MOCD223-M(STATIC) 7D893
U51 UC62IC,SMT,Low Voltage Temp SensorSO-8 TMP36FS(STATIC) ANALOG D
U52 ULAS02IC,SMT,Opamp,Quad,Rail-To-Rail,SOIC-14 TLV2374ID(STATIC) 01295
U53 UX100IC,SMT,Micro,256K Flash,5V,TQFP-100 ATmega2560-16AUR(STATIC)(ROHS) ATMEL
1FN41
U54 UT83IC,SMT,Ultrafast Single Supply Comparator,TSSOP AD8561ARUZ(STATIC)
45496
U55 UP93IC,SMT,Op Amp,Audio,Dual,SO-8 OP275GS(STATIC) 45496
U56 UDLS02IC, SMT, CMOS, Octal Latch,SOIC-20 SN74AHC573DW(STATIC)
01295
U57 UD89IC, SMT, real Time Clock, 12C, SOIC-8 ISL12022IBZ(STATIC)(RoHS)
U58 UW98IC. CMOS, EEPROM, 32kx8, 2.7V-5V, 8SOIC AT25256AN-10SU-2.7(Static)(RoHS) ATMEL
U59 UDMS01IC, SMT, SRAM, 32Kx8, SOIC-28(Wide) CY62256NLL-55SNXI(STATIC)(RoHS)
65786
U60 UT90IC,SMT,Amp,35MHz,CurrentFeedback 1.1A,TO263-7 LT1210CR(STATIC) 64155
U61 UP117IC, SMT, Backup Battery Supervisor, 10-MSOP TPS3613-01DGS(STATIC)(RoHS) Texas
01295
U62 UT79IC,Variable Gain Amp,SMT,90MHz,SOIC-8 AD603AR(STATIC) 45496
U63 UMDS01IC,SMT,DAC,8-Bit,4-ch,SPI,SOIC-14 TLV5620ID(STATIC) 64155
U64 UDTS03IC,SMT,RS-485 Transceiver,Sgl,SOIC-8 DS36C278TM(STATIC)
27014
U65 UX83IC,SMT,2.5V Reference,0.1%,SOT-23-6 LT1790BIS6-2.5(STATIC)
64155
U66 ULAS01IC,SMT,Opamp,Quad,Single Supply,SOIC-14 MC33074AD(STATIC) 04713
U67 UMDS01IC,SMT,DAC,8-Bit,4-ch,SPI,SOIC-14 TLV5620ID(STATIC) 64155
U68 UX76IC,SMT,Quad LVDS Rxcvr,3.3V,SOIC-16 DS90LV048ATM(STATIC)
27014
Page 48 of 104 NAPC160B/01
Continued from previous page
NAPC160B/01 Control/Interface PWB Assy, NXSeries
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
U69 UDLS04IC,SMT,CMOS,8-Bit Shft Reg,Par I/P, SOIC-16 MC74HC165AD(STATIC)
04713
U70 UDLS06IC,SMT,CMOS,Quad Tri-State Buffer, SOIC-14 MC74HC125AD(STATIC)
04713
U71 UDLS04IC,SMT,CMOS,8-Bit Shft Reg,Par I/P, SOIC-16 MC74HC165AD(STATIC)
04713
U72 UDLS05IC,SMT,CMOS,8-Bit Shft Reg,Par O/P, SOIC-16 MC74HC595AD(STATIC)
04713
U73 UDLS05IC,SMT,CMOS,8-Bit Shft Reg,Par O/P, SOIC-16 MC74HC595AD(STATIC)
04713
U74 ULAS01IC,SMT,Opamp,Quad,Single Supply,SOIC-14 MC33074AD(STATIC) 04713
U75 UDOS01IC,SMT,Dual Optocoupler,SOIC-8 MOCD223-M(STATIC) 7D893
U76 UDOS01IC,SMT,Dual Optocoupler,SOIC-8 MOCD223-M(STATIC) 7D893
U77 UDOS01IC,SMT,Dual Optocoupler,SOIC-8 MOCD223-M(STATIC) 7D893
U78 UDOS01IC,SMT,Dual Optocoupler,SOIC-8 MOCD223-M(STATIC) 7D893
U79 UDOS01IC,SMT,Dual Optocoupler,SOIC-8 MOCD223-M(STATIC) 7D893
U80 UDOS01IC,SMT,Dual Optocoupler,SOIC-8 MOCD223-M(STATIC) 7D893
U81 UDOS01IC,SMT,Dual Optocoupler,SOIC-8 MOCD223-M(STATIC) 7D893
U82 UDOS01IC,SMT,Dual Optocoupler,SOIC-8 MOCD223-M(STATIC) 7D893
U83 UDAS01IC,SMT,Trans Array, 7 Darl.,SOIC-16 MC1413BD(STATIC) 04713
U84 UDAS01IC,SMT,Trans Array, 7 Darl.,SOIC-16 MC1413BD(STATIC) 04713
U85 UDAS01IC,SMT,Trans Array, 7 Darl.,SOIC-16 MC1413BD(STATIC) 04713
U86 UDTS05IC,SMT,RS-232 Transceiver,3.3V,SO-16 ADM3202ARN(STATIC)
45496
U87 UD82IC, SMT, 2-Input Logic, UHSUniv Config SC70-6 NC7SZ57P6X(Static)(RoHS)
07933
XBT01 BBHT01Holder, 20mm Coin Cell, PWB Mt 1065 91833
XE01 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
XE03 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
Y01 XFPS11Crystal, SMT, Fund, 11.0592MHz HCM49-11.0592MABJ-UT(RoHS)
3DX59
Y02 XFPS10Crystal,SMT,Fund,ParRes,32.768kHz, 20ppm, 12.5pF, -40-85C
ABS07-32.768KHZ-T(STATIC)(RoHS) Abracon Corp
Page 49 of 104 NAPC160B/01
NAPE78A/01 Digital AM Exciter PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C001 CCFS24Cap,SMT,Ceramic,22pF,2%,50V,C0G,0603 C0603C220G5GAC 31433
C002 CCFS32Cap,SMT,Ceramic,100pF,2%,50V,C0G,0603 C0603C101G5GAC 31433
C003 CCFS32Cap,SMT,Ceramic,100pF,2%,50V,C0G,0603 C0603C101G5GAC 31433
C004 CCFS24Cap,SMT,Ceramic,22pF,2%,50V,C0G,0603 C0603C220G5GAC 31433
C005 -Not Used NOT USED 37338
C006 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C007 CCFS01Cap,SMT,Ceramic,0.001uF,10%,50V,X7R,0603 C0603C102K5RAC 31433
C008 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C009 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C010 -Not Used NOT USED 37338
C011 -Not Used NOT USED 37338
C012 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C013 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C014 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C015 CCFS48Cap,SMT,Ceramic,4700pF,2%,50V,C0G,1206 C1206C472G5GAC 31433
C016 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C017 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C018 CCFS32Cap,SMT,Ceramic,100pF,2%,50V,C0G,0603 C0603C101G5GAC 31433
C019 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C020 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C021 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C022 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C023 -Not Used NOT USED 37338
C024 -Not Used NOT USED 37338
C025 -Not Used NOT USED 37338
C026 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C027 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C028 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C029 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C030 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C031 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C032 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C033 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C034 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C035 CCFS53Cap, SMT, Ceramic,47uF,20%,6.3V, 1210 C3225X5R0J476M(RoHS)
56289
C036 CCFS53Cap, SMT, Ceramic,47uF,20%,6.3V, 1210 C3225X5R0J476M(RoHS)
56289
C037 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C038 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
Page 50 of 104 NAPE78A/01
Continued from previous page
NAPE78A/01 Digital AM Exciter PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C039 CCFS53Cap, SMT, Ceramic,47uF,20%,6.3V, 1210 C3225X5R0J476M(RoHS)
56289
C040 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C041 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C042 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C043 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C044 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C045 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C046 CCFS03Cap,SMT,Ceramic,0.0047uF,10%,50V,X7R,0603 C0603C472K5RAC 31433
C047 -Not Used NOT USED 37338
C048 CCFS06Cap,SMT,Ceramic,0.047uF,10%,50V,X7R,0603 C0603C473K5RAC 31433
C049 CCFS34Cap,SMT,Ceramic,220pF,2%,50V,C0G,0603 C0603C221G5GAC 31433
C050 CCFS03Cap,SMT,Ceramic,0.0047uF,10%,50V,X7R,0603 C0603C472K5RAC 31433
C051 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C052 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C053 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C054 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C055 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C056 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C057 CCFS32Cap,SMT,Ceramic,100pF,2%,50V,C0G,0603 C0603C101G5GAC 31433
C058 CCFS32Cap,SMT,Ceramic,100pF,2%,50V,C0G,0603 C0603C101G5GAC 31433
C059 CCFS42Cap,SMT,Ceramic,1000pF,2%,50V,C0G,0805 C0805C102G5GAC 31433
C060 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C061 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C062 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C063 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C064 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C065 CCFS42Cap,SMT,Ceramic,1000pF,2%,50V,C0G,0805 C0805C102G5GAC 31433
C066 CCFS42Cap,SMT,Ceramic,1000pF,2%,50V,C0G,0805 C0805C102G5GAC 31433
C067 CCFS42Cap,SMT,Ceramic,1000pF,2%,50V,C0G,0805 C0805C102G5GAC 31433
C068 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C069 CCFS23Cap,SMT,Ceramic,18pF,2%,50V,C0G,0603 C0603C180G5GAC 31433
C070 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C071 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C072 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C073 CCFS42Cap,SMT,Ceramic,1000pF,2%,50V,C0G,0805 C0805C102G5GAC 31433
C074 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C075 CCFS32Cap,SMT,Ceramic,100pF,2%,50V,C0G,0603 C0603C101G5GAC 31433
C076 CCFS32Cap,SMT,Ceramic,100pF,2%,50V,C0G,0603 C0603C101G5GAC 31433
C077 CCFS23Cap,SMT,Ceramic,18pF,2%,50V,C0G,0603 C0603C180G5GAC 31433
Page 51 of 104 NAPE78A/01
Continued from previous page
NAPE78A/01 Digital AM Exciter PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C078 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C079 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C080 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C081 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C082 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C083 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C084 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C085 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C086 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C087 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C088 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C089 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C090 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C091 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C092 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C093 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C094 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C095 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C096 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C097 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C098 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C099 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C100 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C101 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C102 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C103 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C104 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C105 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C106 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C107 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C108 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C109 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C110 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C111 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C112 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C113 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C114 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C115 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C116 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
Page 52 of 104 NAPE78A/01
Continued from previous page
NAPE78A/01 Digital AM Exciter PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C117 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C118 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C119 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C120 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C121 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C122 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C123 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C124 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C125 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C126 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C127 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C128 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C129 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C130 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C131 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C132 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C133 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C134 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C135 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C136 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C137 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C138 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C139 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C140 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C141 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C142 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C143 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C144 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C145 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C146 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C147 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C148 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C149 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C150 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C151 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C152 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C153 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C154 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C155 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
Page 53 of 104 NAPE78A/01
Continued from previous page
NAPE78A/01 Digital AM Exciter PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C156 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C157 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C158 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C159 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C160 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C161 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C162 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C163 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C164 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C165 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C166 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C167 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C168 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C169 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C170 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C171 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C172 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C173 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C174 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C175 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C176 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C177 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C178 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C179 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C180 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C181 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C182 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C183 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C184 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C185 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C186 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C187 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C188 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C189 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C190 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C191 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C192 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C193 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C194 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
Page 54 of 104 NAPE78A/01
Continued from previous page
NAPE78A/01 Digital AM Exciter PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C195 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C196 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C197 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C198 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C199 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C200 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C201 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C202 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C203 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C204 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C205 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C206 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C207 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C208 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C209 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C210 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C211 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C212 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C213 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C214 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C215 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C216 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C217 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C218 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C219 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C220 CCFS01Cap,SMT,Ceramic,0.001uF,10%,50V,X7R,0603 C0603C102K5RAC 31433
DS01 QDLS01Diode, SMT, LED, Green,(560nm), 0603 597-5312-402F(STATIC)(RoHS)
83330
DS02 QDLS01Diode, SMT, LED, Green,(560nm), 0603 597-5312-402F(STATIC)(RoHS)
83330
DS03 QDLS01Diode, SMT, LED, Green,(560nm), 0603 597-5312-402F(STATIC)(RoHS)
83330
DS04 QDLS01Diode, SMT, LED, Green,(560nm), 0603 597-5312-402F(STATIC)(RoHS)
83330
E01 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
J01 JS12Conn, Plug, D-Sub, 25 pin, PWB Mt K22X-B25P-NJ 63590
J02 JS13Conn, Socket, D-Sub, 25 pin, PWB Mt K22-B25S-NJ 22421
J03 JS50Conn, Socket, D-Sub, 9-Pin,Vertical PWB 164A16669X C3057
J04 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
J05 JF47Conn, Header,Square Post,Gold,Dual,40-pin 4-102973-0 09482
J06 JF47Conn, Header,Square Post,Gold,Dual,40-pin 4-102973-0 09482
Page 55 of 104 NAPE78A/01
Continued from previous page
NAPE78A/01 Digital AM Exciter PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
J07 JF47Conn, Header,Square Post,Gold,Dual,40-pin 4-102973-0 09482
L01 LS21Inductor,SMT,390nH,375mA,2520 NLV25T-R39J-PF(ROHS)
TDK
L02 LS20Inductor,SMT,560nH,325mA,2520 NLV25T-R56J-PF(ROHS)
TDK
L03 LS21Inductor,SMT,390nH,375mA,2520 NLV25T-R39J-PF(ROHS)
TDK
L04 LS21Inductor,SMT,390nH,375mA,2520 NLV25T-R39J-PF(ROHS)
TDK
L05 LS20Inductor,SMT,560nH,325mA,2520 NLV25T-R56J-PF(ROHS)
TDK
L06 LS21Inductor,SMT,390nH,375mA,2520 NLV25T-R39J-PF(ROHS)
TDK
L07 -Not Used NOT USED 37338
L08 LCFS01Inductor, SMT, Choke, 600ohms,2A, 0805 ILHB0805RK601V 56845
L09 -Not Used NOT USED 37338
L10 LCFS01Inductor, SMT, Choke, 600ohms,2A, 0805 ILHB0805RK601V 56845
L11 LCFS01Inductor, SMT, Choke, 600ohms,2A, 0805 ILHB0805RK601V 56845
L12 LS17Inductor,SMT,Pwr,Shielded,P116 7 Series,3.5A,3.6uH P1167.362 01961
L13 LCFS01Inductor, SMT, Choke, 600ohms,2A, 0805 ILHB0805RK601V 56845
L14 LCFS01Inductor, SMT, Choke, 600ohms,2A, 0805 ILHB0805RK601V 56845
L15 LCFS01Inductor, SMT, Choke, 600ohms,2A, 0805 ILHB0805RK601V 56845
L16 LCFS01Inductor, SMT, Choke, 600ohms,2A, 0805 ILHB0805RK601V 56845
R01 RFFS87Resistor, SMT, 200ohm, 1%,1/10W, 0603 RK73H1JLTD2000F 59124
R02 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R03 -Not Used NOT USED 37338
R04 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R05 RFFS87Resistor, SMT, 200ohm, 1%,1/10W, 0603 RK73H1JLTD2000F 59124
R06 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R07 -Not Used NOT USED 37338
R08 RFFS31Resistor,SMT,MF,274ohms,1%,1/10W,0603 RK73H1JLTD2740F 59124
R09 -Not Used NOT USED 37338
R10 RFFS64Resistor,SMT,MF,150Kohms,1%,1/10W,0603 RK73H1JLTD1503F 59124
R11 RFFS42Resistor,SMT,MF,2210ohms,1%,1/10W,0603 RK73H1JLTD2211F 59124
R12 RFFS59Resistor,SMT,MF,56.2Kohms,1%,1/10W,0603 RK73H1JLTD5622F 59124
R13 RFFS28Resistor,SMT,MF,150ohms,1%,1/10W,0603 RK73H1JLTD1500F 59124
R14 RFFS28Resistor,SMT,MF,150ohms,1%,1/10W,0603 RK73H1JLTD1500F 59124
R15 RFFS28Resistor,SMT,MF,150ohms,1%,1/10W,0603 RK73H1JLTD1500F 59124
R16 RFFS28Resistor,SMT,MF,150ohms,1%,1/10W,0603 RK73H1JLTD1500F 59124
R17 RFFS02Resistor,SMT,MF,1.00ohms,1%,1/10W,0603 RK73H1JLTD1R00F 59124
R18 RFFS18Resistor,SMT,MF,22.1ohms,1%,1/10W,0603 RK73H1JLTD22R1F 59124
R19 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
Page 56 of 104 NAPE78A/01
Continued from previous page
NAPE78A/01 Digital AM Exciter PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R20 RFFS02Resistor,SMT,MF,1.00ohms,1%,1/10W,0603 RK73H1JLTD1R00F 59124
R21 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R22 RFFS18Resistor,SMT,MF,22.1ohms,1%,1/10W,0603 RK73H1JLTD22R1F 59124
R23 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R24 RFFS18Resistor,SMT,MF,22.1ohms,1%,1/10W,0603 RK73H1JLTD22R1F 59124
R25 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R26 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R27 -Not Used NOT USED 37338
R28 -Not Used NOT USED 37338
R29 -Not Used NOT USED 37338
R30 RFFS27Resistor,SMT,MF,121ohms,1%,1/10W,0603 RK73H1JLTD1210F 59124
R31 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R32 RFFS33Resistor,SMT,MF,392ohms,1%,1/10W,0603 RK73H1JLTD3920F 59124
R33 RFFS59Resistor,SMT,MF,56.2Kohms,1%,1/10W,0603 RK73H1JLTD5622F 59124
R34 RFFS02Resistor,SMT,MF,1.00ohms,1%,1/10W,0603 RK73H1JLTD1R00F 59124
R35 RFFS02Resistor,SMT,MF,1.00ohms,1%,1/10W,0603 RK73H1JLTD1R00F 59124
R36 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R37 RFFS18Resistor,SMT,MF,22.1ohms,1%,1/10W,0603 RK73H1JLTD22R1F 59124
R38 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R39 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R40 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R41 RFFS18Resistor,SMT,MF,22.1ohms,1%,1/10W,0603 RK73H1JLTD22R1F 59124
R42 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R43 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R44 -Not Used NOT USED 37338
R45 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R46 -Not Used NOT USED 37338
R47 -Not Used NOT USED 37338
R48 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R49 RFFS31Resistor,SMT,MF,274ohms,1%,1/10W,0603 RK73H1JLTD2740F 59124
R50 RFFS83Resistor,SMT,MF,28.7 KOhms,1%,1/10W,0603 RK73H1JT2872F 59124
R51 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R52 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R53 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R54 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R55 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R56 RAE34Resistor,SMT,MF,49.9R,1%,1/10W0603 RK73H1JT49R9F 59124
R57 RFFS45Resistor,SMT,MF,3920ohms,1%,1/10W,0603 RK73H1JLTD3921F 59124
R58 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
Page 57 of 104 NAPE78A/01
Continued from previous page
NAPE78A/01 Digital AM Exciter PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R59 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R60 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R61 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R62 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R63 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R64 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R65 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R66 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R67 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R68 RFFS31Resistor,SMT,MF,274ohms,1%,1/10W,0603 RK73H1JLTD2740F 59124
R69 RFFS35Resistor,SMT,MF,562ohms,1%,1/10W,0603 RK73H1JLTD5620F 59124
R70 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R71 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R72 RFFS39Resistor,SMT,MF,1210ohms,1%,1/10W,0603 RK73H1JLTD1211F 59124
R73 RFFS40Resistor,SMT,MF,1500ohms,1%,1/10W,0603 RK73H1JLTD1501F 59124
R74 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R75 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R76 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R77 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R78 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R79 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R80 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R81 RFFS18Resistor,SMT,MF,22.1ohms,1%,1/10W,0603 RK73H1JLTD22R1F 59124
R82 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R83 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R84 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R85 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R86 RFFS18Resistor,SMT,MF,22.1ohms,1%,1/10W,0603 RK73H1JLTD22R1F 59124
R87 RFFS45Resistor,SMT,MF,3920ohms,1%,1/10W,0603 RK73H1JLTD3921F 59124
R88 RFFS45Resistor,SMT,MF,3920ohms,1%,1/10W,0603 RK73H1JLTD3921F 59124
R89 RFFS51Resistor,SMT,MF,12.1Kohms,1%,1/10W,0603 RK73H1JLTD1212F 59124
R90 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R91 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R92 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R93 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R94 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R95 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R96 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R97 RFFS18Resistor,SMT,MF,22.1ohms,1%,1/10W,0603 RK73H1JLTD22R1F 59124
Page 58 of 104 NAPE78A/01
Continued from previous page
NAPE78A/01 Digital AM Exciter PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R98 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
S01 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
T01 TZ93Transformer, SMT,4:1,0.03 to 125MHz ADT4-6T
T02 TZ88Transformer,SMT,50 ohms,0.03to 125MHz ADT1-6T+(ROHS) MINI-CIRC
T03 TZ88Transformer,SMT,50 ohms,0.03to 125MHz ADT1-6T+(ROHS) MINI-CIRC
TP01 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP03 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP04 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP05 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP06 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP07 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP08 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP09 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP11 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP12 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP13 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP14 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP15 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
U01 UW86IC,SMT,DAC,400MSPS,14 bitTQFP-48 DAC5674IPHPR(STATIC)(ROHS) TEXAS
TEXAS
U02 UT98Oscillator,SMT,TCVCXO,10MHz,3.3V,2ppm TC75-10M000-BV020A(STATIC)(ROHS)
4TIMING
U03 UW64IC,SMT,DAC,16 Bit Serial,MSOP-8 DAC8531E(STATIC) 13919
U04 UD80IC, SMT, Inverter, UHS, Dual,UnBFR, 6p SC70 1.2mm wide
NC7WZU04P6X(RoHS)
SCT30
Page 59 of 104 NAPE78A/01
Continued from previous page
NAPE78A/01 Digital AM Exciter PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
U05 UX67IC,SMT,Linear Regulator,3A Adj,Q-5 DD LT1764AEQ(STATIC) 64155
U06 UDLS08IC,SMT,CMOS,Phase Locked Loop,SO-16 ADF4116BRUZ(static) 27014
U07 UW90IC,SMT,Quad 2 TO 1 DATA Sel/Mux 3 States Output,3.3V
74LVC257APW(STATIC)(ROHS) NXP SEMICONDUCTOR
NXP SEMI
U08 UW94IC,SMT,ADC,RF,14 bit,TQFP-64 ADS5542IPAP(STATIC)(ROHS)
TEXAS
U09 UX97IC,SMT,3.3V Voltage Reference,SOT23-3 REF3033AIDBZT(STATIC)
13919
U10 UX66IC,SMT,Linear Regulator,150mAAdj.,MSOP-8 LT1762EMS8(STATIC)
64155
U11 UX82IC,SMT,ECL Clock Divider /2,SO-8 MC100EP32D(STATIC)
1MQ07
U12 UW94IC,SMT,ADC,RF,14 bit,TQFP-64 ADS5542IPAP(STATIC)(ROHS)
TEXAS
U13 UW115IC, SMT, Spartan3-1600 FPGA,FG320 XC3S1600E-5FG320C(STATIC)
68994
U14 UX65IC,SMT,3A Sync Buck Converter,SO-20 w/pwr pad TPS54310PWP(STATIC)
01295
U15 UW89IC,SMT,ADC,Serial, 12 bit ADC121S051CIMF(STATIC)(ROHS)
NATIONAL
U16 UX67IC,SMT,Linear Regulator,3A Adj,Q-5 DD LT1764AEQ(STATIC) 64155
U17 UW109IC, SMT, SPI Flash, 16Mbit,SOIC8W M25P16-VMW6G(STATIC)(RoHS)
U18 UW90IC,SMT,Quad 2 TO 1 DATA Sel/Mux 3 States Output,3.3V
74LVC257APW(STATIC)(ROHS) NXP SEMICONDUCTOR
NXP SEMI
U19 UDTS04IC,SMT,RS-485 Transceiver,3.3V,SO-8 LTC1480IS8(STATIC) 64155
U20 UW80IC,SMT,SRC,Async,2-ch,TQFP-48 SRC4382IPFBR(STATIC)(ROHS)
TEXAS
U21 UX67IC,SMT,Linear Regulator,3A Adj,Q-5 DD LT1764AEQ(STATIC) 64155
U22 UX64IC,SMT,Power Supervisor,DualI/P,33/1.5V,MSOP TPS3306-15DGK(STATIC)
01295
U23 UW80IC,SMT,SRC,Async,2-ch,TQFP-48 SRC4382IPFBR(STATIC)(ROHS)
TEXAS
U24 UW63Res,SMT Network,0402x8,39R EXB2HV390J 54473
U25 UW88IC,SMT,Blackfin DSP,500 MHzmBGA160 ADSP-BF533SBBC-5V(STATIC)
ANALOG
U26 UW63Res,SMT Network,0402x8,39R EXB2HV390J 54473
U27 UX121IC, SDRAM, 128Mbit, x16, TSOP-II, Ext Temp MT48LC8M16A2TG-7E IT:G(STATIC) Micron
U28 UW63Res,SMT Network,0402x8,39R EXB2HV390J 54473
U29 UD65IC,SMT,Differential LineReceivr, 100dB CMR SSM2141S(STATIC) LINEAR
U30 UW63Res,SMT Network,0402x8,39R EXB2HV390J 54473
U31 UP93IC,SMT,Op Amp,Audio,Dual,SO-8 OP275GS(STATIC) 45496
U32 UW63Res,SMT Network,0402x8,39R EXB2HV390J 54473
U33 UW63Res,SMT Network,0402x8,39R EXB2HV390J 54473
Page 60 of 104 NAPE78A/01
Continued from previous page
NAPE78A/01 Digital AM Exciter PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
U34 UDTS05IC,SMT,RS-232 Transceiver,3.3V,SO-16 ADM3202ARN(STATIC)
45496
U35 UP95IC,SMT,Stereo ADC,24bit,96kHz,TSSOP-28 AD1871YRS(STATIC) 45496
U36 UW91IC,SMT,SPI UART,3.3V SC16IS740IPW(STATIC)(ROHS)
NXP
U37 UT93IC,SMT,Voltage Regulator,5V,1A, D2PAK L7805ABD2T-TR(STATIC)(ROHS)
ST MICRO
XE01 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
Y01 UT124Oscilitor, SMT, VCXO,158.76MHz LVPECL, 3.3V, 9x14mmx4
VCFRPE-158M760-BBA3Y(STATIC)(RoHS) 4TIMING
Y02 UT100Oscillator,SMT,25MHz,3.3V S1613B-25.0000(STATIC)(ROHS)
SARONIX
Y03 XFPS03Crystal,SMT,Fund,Par Res,3.6864MHz,Comm ATSM49-3.6864MHz 23875
Page 61 of 104 NAPE78A/01
NAPI106 Remote Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C01 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
CR01 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR02 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR03 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR04 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR05 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR06 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR07 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR08 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR09 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR10 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR11 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR12 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR13 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR14 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR15 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR16 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
DS01 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
DS02 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
DS03 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
DS04 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
DS05 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
DS06 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
DS07 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
DS08 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
DS09 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
DS10 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
DS11 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
DS12 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
DS13 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
DS14 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
DS15 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
Page 62 of 104 NAPI106
Continued from previous page
NAPI106 Remote Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
DS16 QDLS04Diode,SMT,LED,Bicolor,Red/Green,1210 597-7701-507(STATIC)
83330
E01 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
E02 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
E03 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
E04 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
E05 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
E06 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
E07 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
E08 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
E09 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
E10 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
E11 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
E12 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
E13 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
E14 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
E15 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
E16 JQ15Conn, Post Shunt, 2 Pos, .10 Centreline 390088-2 09482
J01 JS12Conn, Plug, D-Sub, 25 pin, PWB Mt K22X-B25P-NJ 63590
J02 JS13Conn, Socket, D-Sub, 25 pin, PWB Mt K22-B25S-NJ 22421
J03 JR53Terminal Block,8-pos,PWB Mount,90 Deg 1803332(ROHS) PHOENIX
J04 JR53Terminal Block,8-pos,PWB Mount,90 Deg 1803332(ROHS) PHOENIX
J05 JR53Terminal Block,8-pos,PWB Mount,90 Deg 1803332(ROHS) PHOENIX
J06 JR53Terminal Block,8-pos,PWB Mount,90 Deg 1803332(ROHS) PHOENIX
J07 JR53Terminal Block,8-pos,PWB Mount,90 Deg 1803332(ROHS) PHOENIX
J08 JR53Terminal Block,8-pos,PWB Mount,90 Deg 1803332(ROHS) PHOENIX
J09 JR53Terminal Block,8-pos,PWB Mount,90 Deg 1803332(ROHS) PHOENIX
R01 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R02 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R03 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R04 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R05 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R06 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R07 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R08 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R09 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R10 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R11 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R12 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R13 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
Page 63 of 104 NAPI106
Continued from previous page
NAPI106 Remote Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R14 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R15 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
R16 RAD27Resistor, SMT, MF, 1500 Ohms,1% 1/4W RK73H2BL1501F 59124
S01 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
S02 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
S03 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
S04 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
S05 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
S06 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
S07 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
S08 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
S09 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
S10 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
S11 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
S12 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
S13 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
S14 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
S15 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
S16 SA60Switch,SMt,Mom.,1PSTNO KSC321G ITT INDUS
XE01 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
XE02 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
XE03 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
XE04 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
XE05 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
XE06 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
XE07 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
XE08 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
XE09 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
XE10 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
XE11 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
XE12 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
XE13 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
XE14 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
XE15 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
XE16 JQ16Conn, Header, SIP,12 Pin Breakaway,.10 Ctr 1-103185-2 09482
Page 64 of 104 NAPI106
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C001 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C002 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C003 CCFS01Cap,SMT,Ceramic,0.001uF,10%,50V,X7R,0603 C0603C102K5RAC 31433
C004 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C005 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C006 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C007 CTFS05Cap,SMT,Tantalum,47uF,10%,16V,2917 T494D476K016AS 31433
C008 CBP16Capacitor, Elect, 33uF, 63V,+/-20% KME63VB33RM6X11LL
UNITED
C009 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C010 CT41Capacitor, Elect, 1000uF 50V SME50VB102M16X25LL
1W344
C011 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C012 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C013 CCFS23Cap,SMT,Ceramic,18pF,2%,50V,C0G,0603 C0603C180G5GAC 31433
C014 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C015 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C016 CCFS05Cap,SMT,Ceramic,0.022uF,10%,50V,X7R,0603 C0603C223K5RAC 31433
C017 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C018 CCFS23Cap,SMT,Ceramic,18pF,2%,50V,C0G,0603 C0603C180G5GAC 31433
C019 -Not Used NOT USED 37338
C020 -Not Used NOT USED 37338
C021 -Not Used NOT USED 37338
C022 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C023 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C024 CCFS05Cap,SMT,Ceramic,0.022uF,10%,50V,X7R,0603 C0603C223K5RAC 31433
C025 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C026 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C027 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C028 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C029 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C030 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C031 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C032 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C033 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C034 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C035 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C036 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
Page 65 of 104 NAPI152A
Continued from previous page
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C037 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C038 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C039 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C040 -Not Used NOT USED 37338
C041 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C042 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C043 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C044 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C045 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C046 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C047 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C048 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C049 -Not Used NOT USED 37338
C050 -Not Used NOT USED 37338
C051 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C052 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C053 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C054 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C055 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C056 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C057 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C058 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C059 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C060 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C061 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C062 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C063 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C064 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C065 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C066 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C067 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C068 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C069 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C070 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C071 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C072 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C073 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
Page 66 of 104 NAPI152A
Continued from previous page
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C074 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C075 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C076 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C077 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C078 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C079 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C080 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C081 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C082 CCFS06Cap,SMT,Ceramic,0.047uF,10%,50V,X7R,0603 C0603C473K5RAC 31433
C083 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C084 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C085 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C086 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C087 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C088 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C089 CCFS01Cap,SMT,Ceramic,0.001uF,10%,50V,X7R,0603 C0603C102K5RAC 31433
C090 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C091 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C092 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C093 CCFS01Cap,SMT,Ceramic,0.001uF,10%,50V,X7R,0603 C0603C102K5RAC 31433
C094 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C095 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C096 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C097 CCFS01Cap,SMT,Ceramic,0.001uF,10%,50V,X7R,0603 C0603C102K5RAC 31433
C098 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C099 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C100 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C101 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C102 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C103 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C104 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C105 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C106 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C107 CCFS01Cap,SMT,Ceramic,0.001uF,10%,50V,X7R,0603 C0603C102K5RAC 31433
C108 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C109 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
Page 67 of 104 NAPI152A
Continued from previous page
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C110 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C111 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C112 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C113 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C114 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C115 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C116 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C117 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C118 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C119 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C120 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C121 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C122 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C123 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C124 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C125 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C126 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C127 CJ24Capacitor,Elect,SnapMt,22000uF+/-20% 80V 380LX223M080A102 CORNELL
C128 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C129 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C130 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C131 CCFS04Cap,SMT,Ceramic,0.01uF,10%,50V,X7R,0603 C0603C103K5RAC 31433
C132 CT41Capacitor, Elect, 1000uF 50V SME50VB102M16X25LL
1W344
C133 CCFS01Cap,SMT,Ceramic,0.001uF,10%,50V,X7R,0603 C0603C102K5RAC 31433
C134 CCFS01Cap,SMT,Ceramic,0.001uF,10%,50V,X7R,0603 C0603C102K5RAC 31433
C135 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C136 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C137 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C138 -Not Used NOT USED 37338
C139 -Not Used NOT USED 37338
C140 -Not Used NOT USED 37338
C141 -Not Used NOT USED 37338
C142 CCFS06Cap,SMT,Ceramic,0.047uF,10%,50V,X7R,0603 C0603C473K5RAC 31433
C143 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C144 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C145 CX36Capacitor, SMT, Tantalum, 47uF 10%, 25V TR3D476K025C0100(RoHS) VISHAY
Page 68 of 104 NAPI152A
Continued from previous page
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C146 CTFS03Cap,SMT,Tantalum,10uF,10%,35V,2917 T494D106K035AS 31433
C147 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C148 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C149 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C150 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C151 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C152 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C153 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C154 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C155 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C156 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C157 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C158 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C159 CCFS05Cap,SMT,Ceramic,0.022uF,10%,50V,X7R,0603 C0603C223K5RAC 31433
C160 CCFS05Cap,SMT,Ceramic,0.022uF,10%,50V,X7R,0603 C0603C223K5RAC 31433
C161 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C162 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C163 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C164 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C165 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C166 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C167 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C168 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C169 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C170 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C171 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C172 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C173 CCFS09Cap,SMT,Ceramic,0.47uF,10%,25V,X7R,0805 C0805C474K3RAC 31433
C174 CCFS09Cap,SMT,Ceramic,0.47uF,10%,25V,X7R,0805 C0805C474K3RAC 31433
C175 CCFS09Cap,SMT,Ceramic,0.47uF,10%,25V,X7R,0805 C0805C474K3RAC 31433
C176 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C177 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C178 CTFS05Cap,SMT,Tantalum,47uF,10%,16V,2917 T494D476K016AS 31433
C179 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C180 CX36Capacitor, SMT, Tantalum, 47uF 10%, 25V TR3D476K025C0100(RoHS) VISHAY
C181 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C182 CCFS09Cap,SMT,Ceramic,0.47uF,10%,25V,X7R,0805 C0805C474K3RAC 31433
C183 CCFS09Cap,SMT,Ceramic,0.47uF,10%,25V,X7R,0805 C0805C474K3RAC 31433
Page 69 of 104 NAPI152A
Continued from previous page
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C184 CCFS09Cap,SMT,Ceramic,0.47uF,10%,25V,X7R,0805 C0805C474K3RAC 31433
C185 CCFS06Cap,SMT,Ceramic,0.047uF,10%,50V,X7R,0603 C0603C473K5RAC 31433
C186 -Not Used NOT USED 37338
C187 -Not Used NOT USED 37338
C188 -Not Used NOT USED 37338
C189 -Not Used NOT USED 37338
C190 CCFS06Cap,SMT,Ceramic,0.047uF,10%,50V,X7R,0603 C0603C473K5RAC 31433
C191 CCFS06Cap,SMT,Ceramic,0.047uF,10%,50V,X7R,0603 C0603C473K5RAC 31433
C192 -Not Used NOT USED 37338
C193 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C194 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C195 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C196 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C197 -Not Used NOT USED 37338
C198 -Not Used NOT USED 37338
C199 -Not Used NOT USED 37338
C200 CCFS06Cap,SMT,Ceramic,0.047uF,10%,50V,X7R,0603 C0603C473K5RAC 31433
C201 CCFS06Cap,SMT,Ceramic,0.047uF,10%,50V,X7R,0603 C0603C473K5RAC 31433
C202 -Not Used NOT USED 37338
C203 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C204 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C205 -Not Used NOT USED 37338
C206 -Not Used NOT USED 37338
C207 -Not Used NOT USED 37338
C208 -Not Used NOT USED 37338
C209 CCFS06Cap,SMT,Ceramic,0.047uF,10%,50V,X7R,0603 C0603C473K5RAC 31433
C210 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C211 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C212 CCFS06Cap,SMT,Ceramic,0.047uF,10%,50V,X7R,0603 C0603C473K5RAC 31433
C213 CCFS60Cap,SMT,Ceramic,1uF,10%,100V,X7R,1210 12101C105KAT2A(ROHS)
AVX CORP
C214 CCFS06Cap,SMT,Ceramic,0.047uF,10%,50V,X7R,0603 C0603C473K5RAC 31433
C215 CCFS52Cap, SMT, Ceramic, 0.1uF, 10%25V X7R, 0603 C0603C104K3RAC 31433
C216 CCFS06Cap,SMT,Ceramic,0.047uF,10%,50V,X7R,0603 C0603C473K5RAC 31433
C217 -Not Used NOT USED 37338
C218 -Not Used NOT USED 37338
C219 -Not Used NOT USED 37338
C220 -Not Used NOT USED 37338
Page 70 of 104 NAPI152A
Continued from previous page
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
CR01 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR02 QDRS01Diode,SMT,Switching,250V,0.2A,SOD-323 BAS21HT1(STATIC) 04713
CR03 QM60Diode, Schottky Rectifier, 60V, 16A MBR1660 (RoHS)
CR04 QM60Diode, Schottky Rectifier, 60V, 16A MBR1660 (RoHS)
CR05 QDSS01Diode,SMT,Schottky,30V,0.2A,SOD-323 BAT54HT1(STATIC) 04713
CR06 QM60Diode, Schottky Rectifier, 60V, 16A MBR1660 (RoHS)
CR07 QM60Diode, Schottky Rectifier, 60V, 16A MBR1660 (RoHS)
CR08 QDSS01Diode,SMT,Schottky,30V,0.2A,SOD-323 BAT54HT1(STATIC) 04713
CR09 -Not Used NOT USED 37338
CR10 -Not Used NOT USED 37338
CR11 -Not Used NOT USED 37338
CR12 -Not Used NOT USED 37338
CR13 -Not Used NOT USED 37338
CR14 QDZS04Diode,SMT,Zener,39V,5%,3W,SMB 1SMB5939BT3 04713
CR15 QM60Diode, Schottky Rectifier, 60V, 16A MBR1660 (RoHS)
CR16 QM60Diode, Schottky Rectifier, 60V, 16A MBR1660 (RoHS)
CR17 QM60Diode, Schottky Rectifier, 60V, 16A MBR1660 (RoHS)
CR18 -Not Used NOT USED 37338
CR19 -Not Used NOT USED 37338
CR20 -Not Used NOT USED 37338
CR21 -Not Used NOT USED 37338
CR22 QN22Diode, Zener, 6.2V, 1.5W, 2% 1N5920C(STATIC) 04713
CR23 QN22Diode, Zener, 6.2V, 1.5W, 2% 1N5920C(STATIC) 04713
CR24 -Not Used NOT USED 37338
CR25 QDSS01Diode,SMT,Schottky,30V,0.2A,SOD-323 BAT54HT1(STATIC) 04713
E01 HR26Connector, Quick-Dis, M,1/4 Tab, PWB 1287 91833
E02 HR26Connector, Quick-Dis, M,1/4 Tab, PWB 1287 91833
J01 JS13Conn, Socket, D-Sub, 25 pin, PWB Mt K22-B25S-NJ 22421
J02 JS13Conn, Socket, D-Sub, 25 pin, PWB Mt K22-B25S-NJ 22421
J03 JS13Conn, Socket, D-Sub, 25 pin, PWB Mt K22-B25S-NJ 22421
J04 JS13Conn, Socket, D-Sub, 25 pin, PWB Mt K22-B25S-NJ 22421
J05 JS13Conn, Socket, D-Sub, 25 pin, PWB Mt K22-B25S-NJ 22421
J06 JT93Connector,Header,2 Pin,90 PWB,66A,600v 10.16mm 1998933 PHOENIX
J07 JT93Connector,Header,2 Pin,90 PWB,66A,600v 10.16mm 1998933 PHOENIX
J08 JS13Conn, Socket, D-Sub, 25 pin, PWB Mt K22-B25S-NJ 22421
J09 JS13Conn, Socket, D-Sub, 25 pin, PWB Mt K22-B25S-NJ 22421
J10 JS12Conn, Plug, D-Sub, 25 pin, PWB Mt K22X-B25P-NJ 63590
J11 JS13Conn, Socket, D-Sub, 25 pin, PWB Mt K22-B25S-NJ 22421
J12 JS12Conn, Plug, D-Sub, 25 pin, PWB Mt K22X-B25P-NJ 63590
Page 71 of 104 NAPI152A
Continued from previous page
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
J13 JQ34Conn, Socket, D-Sub, 9 pin, PWB Mt K22-E9S-NJ KYCON
J14 JQ34Conn, Socket, D-Sub, 9 pin, PWB Mt K22-E9S-NJ KYCON
J15 JS12Conn, Plug, D-Sub, 25 pin, PWB Mt K22X-B25P-NJ 63590
J16 JF47Conn, Header,Square Post,Gold,Dual,40-pin 4-102973-0 09482
K01 -Not Used NOT USED 37338
L01 LCFS01Inductor, SMT, Choke, 600ohms,2A, 0805 ILHB0805RK601V 56845
L02 -Not Used NOT USED 37338
L03 LA16Inductor, Choke, 2.5 Turns, JMtl 82-152-J 33062
L04 LS23Choke, SMT, Common Mode, 7000ohm, 700mA CM2824E702R-10(RoHS)
L05 LA16Inductor, Choke, 2.5 Turns, JMtl 82-152-J 33062
L06 -Not Used NOT USED 37338
L07 -Not Used NOT USED 37338
L08 -Not Used NOT USED 37338
L09 -Not Used NOT USED 37338
Q01 QMNS01Transistor,SMT,MOSFET,N-channel,SOT-223 MMFT960T1(STATIC) 04713
Q02 QR28Thyristor, SCR, 65A, 400V S4065K 27194
Q03 QR28Thyristor, SCR, 65A, 400V S4065K 27194
R001 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R002 -Not Used NOT USED 37338
R003 -Not Used NOT USED 37338
R004 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R005 RAD39Resistor, SMT, MF, 15K Ohms,1%, 1/4W RK73H2BL1502F 59124
R006 RFFS40Resistor,SMT,MF,1500ohms,1%,1/10W,0603 RK73H1JLTD1501F 59124
R007 RFFS41Resistor,SMT,MF,1820ohms,1%,1/10W,0603 RK73H1JLTD1821F 59124
R008 -Not Used NOT USED 37338
R009 RFFS39Resistor,SMT,MF,1210ohms,1%,1/10W,0603 RK73H1JLTD1211F 59124
R010 RFFS39Resistor,SMT,MF,1210ohms,1%,1/10W,0603 RK73H1JLTD1211F 59124
R011 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R012 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R013 -Not Used NOT USED 37338
R014 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R015 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R016 -Not Used NOT USED 37338
R017 RAD45Resistor, SMT, MF, 47.5K Ohms, 1% 1/4W RK73H2BL4752F 59124
R018 -Not Used NOT USED 37338
R019 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R020 -Not Used NOT USED 37338
R021 RFFS52Resistor,SMT,MF,15.0Kohms,1%,1/10W,0603 RK73H1JLTD1502F 59124
R022 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
Page 72 of 104 NAPI152A
Continued from previous page
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R023 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R024 RFFS52Resistor,SMT,MF,15.0Kohms,1%,1/10W,0603 RK73H1JLTD1502F 59124
R025 -Not Used NOT USED 37338
R026 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R027 -Not Used NOT USED 37338
R028 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R029 -Not Used NOT USED 37338
R030 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R031 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R032 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R033 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R034 RFFS52Resistor,SMT,MF,15.0Kohms,1%,1/10W,0603 RK73H1JLTD1502F 59124
R035 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R036 RFFS31Resistor,SMT,MF,274ohms,1%,1/10W,0603 RK73H1JLTD2740F 59124
R037 RFFS31Resistor,SMT,MF,274ohms,1%,1/10W,0603 RK73H1JLTD2740F 59124
R038 RFFS31Resistor,SMT,MF,274ohms,1%,1/10W,0603 RK73H1JLTD2740F 59124
R039 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R040 -Not Used NOT USED 37338
R041 RFFS36Resistor,SMT,MF,681ohms,1%,1/10W,0603 RK73H1JLTD6810F 59124
R042 RFFS49Resistor,SMT,MF,8250ohms,1%,1/10W,0603 RK73H1JLTD8251F 59124
R043 RFFS39Resistor,SMT,MF,1210ohms,1%,1/10W,0603 RK73H1JLTD1211F 59124
R044 RAD17Resistor, SMT, MF, 221 Ohms,1% 1/4W RK73H2BL2210F 59124
R045 RAD17Resistor, SMT, MF, 221 Ohms,1% 1/4W RK73H2BL2210F 59124
R046 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R047 RFFS36Resistor,SMT,MF,681ohms,1%,1/10W,0603 RK73H1JLTD6810F 59124
R048 RFFS40Resistor,SMT,MF,1500ohms,1%,1/10W,0603 RK73H1JLTD1501F 59124
R049 -Not Used NOT USED 37338
R050 -Not Used NOT USED 37338
R051 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R052 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R053 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R054 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R055 -Not Used NOT USED 37338
R056 RFFS52Resistor,SMT,MF,15.0Kohms,1%,1/10W,0603 RK73H1JLTD1502F 59124
R057 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R058 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R059 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R060 RFFS52Resistor,SMT,MF,15.0Kohms,1%,1/10W,0603 RK73H1JLTD1502F 59124
R061 RFFS62Resistor,SMT,MF,100Kohms,1%,1/10W,0603 RK73H1JLTD1003F 59124
Page 73 of 104 NAPI152A
Continued from previous page
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R062 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R063 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R064 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R065 RAD25Resistor, SMT, MF, 1000 Ohms,1% 1/4W RK73H2BL1001F 59124
R066 RFFS48Resistor,SMT,MF,6810ohms,1%,1/10W,0603 RK73H1JLTD6811F 59124
R067 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R068 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R069 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R070 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R071 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R072 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R073 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R074 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R075 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R076 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R077 RFFS39Resistor,SMT,MF,1210ohms,1%,1/10W,0603 RK73H1JLTD1211F 59124
R078 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R079 RFFS49Resistor,SMT,MF,8250ohms,1%,1/10W,0603 RK73H1JLTD8251F 59124
R080 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R081 RFFS51Resistor,SMT,MF,12.1Kohms,1%,1/10W,0603 RK73H1JLTD1212F 59124
R082 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R083 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R084 RAD25Resistor, SMT, MF, 1000 Ohms,1% 1/4W RK73H2BL1001F 59124
R085 RFFS39Resistor,SMT,MF,1210ohms,1%,1/10W,0603 RK73H1JLTD1211F 59124
R086 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R087 RFFS49Resistor,SMT,MF,8250ohms,1%,1/10W,0603 RK73H1JLTD8251F 59124
R088 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R089 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R090 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R091 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R092 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R093 RAD25Resistor, SMT, MF, 1000 Ohms,1% 1/4W RK73H2BL1001F 59124
R094 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R095 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R096 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R097 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R098 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R099 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R100 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
Page 74 of 104 NAPI152A
Continued from previous page
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R101 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R102 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R103 -Not Used NOT USED 37338
R104 RFFS44Resistor,SMT,MF,3320ohms,1%,1/10W,0603 RK73H1JLTD3321F 59124
R105 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R106 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R107 RFFS52Resistor,SMT,MF,15.0Kohms,1%,1/10W,0603 RK73H1JLTD1502F 59124
R108 RFFS54Resistor,SMT,MF,22.1Kohms,1%,1/10W,0603 RK73H1JLTD2212F 59124
R109 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R110 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R111 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R112 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R113 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R114 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R115 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R116 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R117 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R118 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R119 RFFS39Resistor,SMT,MF,1210ohms,1%,1/10W,0603 RK73H1JLTD1211F 59124
R120 RFFS49Resistor,SMT,MF,8250ohms,1%,1/10W,0603 RK73H1JLTD8251F 59124
R121 RFFS47Resistor,SMT,MF,5620ohms,1%,1/10W,0603 RK73H1JLTD5621F 59124
R122 RFFS45Resistor,SMT,MF,3920ohms,1%,1/10W,0603 RK73H1JLTD3921F 59124
R123 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R124 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R125 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R126 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R127 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R128 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R129 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R130 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R131 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R132 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R133 RFFS52Resistor,SMT,MF,15.0Kohms,1%,1/10W,0603 RK73H1JLTD1502F 59124
R134 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R135 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R136 RFFS42Resistor,SMT,MF,2210ohms,1%,1/10W,0603 RK73H1JLTD2211F 59124
R137 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R138 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R139 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
Page 75 of 104 NAPI152A
Continued from previous page
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R140 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R141 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R142 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R143 RFFS70Resistor,SMT,MF,475Kohms,1%,1/10W,0603 RK73H1JLTD4753F 59124
R144 RFFS62Resistor,SMT,MF,100Kohms,1%,1/10W,0603 RK73H1JLTD1003F 59124
R145 RFFS58Resistor,SMT,MF,47.5Kohms,1%,1/10W,0603 RK73H1JLTD4752F 59124
R146 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R147 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R148 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R149 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R150 RFFS54Resistor,SMT,MF,22.1Kohms,1%,1/10W,0603 RK73H1JLTD2212F 59124
R151 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R152 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R153 RFFS40Resistor,SMT,MF,1500ohms,1%,1/10W,0603 RK73H1JLTD1501F 59124
R154 RFFS62Resistor,SMT,MF,100Kohms,1%,1/10W,0603 RK73H1JLTD1003F 59124
R155 RFFS40Resistor,SMT,MF,1500ohms,1%,1/10W,0603 RK73H1JLTD1501F 59124
R156 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R157 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R158 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R159 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R160 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R161 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R162 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R163 RFFS40Resistor,SMT,MF,1500ohms,1%,1/10W,0603 RK73H1JLTD1501F 59124
R164 RFFS40Resistor,SMT,MF,1500ohms,1%,1/10W,0603 RK73H1JLTD1501F 59124
R165 RFFS40Resistor,SMT,MF,1500ohms,1%,1/10W,0603 RK73H1JLTD1501F 59124
R166 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R167 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R168 RFFS50Resistor,SMT,MF,10.0Kohms,1%,1/10W,0603 RK73H1JLTD1002F 59124
R169 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R170 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R171 RFFS14Resistor,SMT,MF,10.0ohms,1%,1/10W,0603 RK73H1JLTD10R0F 59124
R172 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R173 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R174 RFFS54Resistor,SMT,MF,22.1Kohms,1%,1/10W,0603 RK73H1JLTD2212F 59124
R175 RFFS54Resistor,SMT,MF,22.1Kohms,1%,1/10W,0603 RK73H1JLTD2212F 59124
R176 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R177 RFFS54Resistor,SMT,MF,22.1Kohms,1%,1/10W,0603 RK73H1JLTD2212F 59124
R178 RFFS54Resistor,SMT,MF,22.1Kohms,1%,1/10W,0603 RK73H1JLTD2212F 59124
Page 76 of 104 NAPI152A
Continued from previous page
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R179 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R180 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R181 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R182 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R183 -Not Used NOT USED 37338
R184 -Not Used NOT USED 37338
R185 -Not Used NOT USED 37338
R186 RAD58Resistor, SMT, 3.9 Ohms, 1%, 1W, 2512 ERJ-1TRQF3R9U
R187 RAD58Resistor, SMT, 3.9 Ohms, 1%, 1W, 2512 ERJ-1TRQF3R9U
R188 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R189 -Not Used NOT USED 37338
R190 RAD75Resistor, SMT, 2 Ohms, 5%, 1/4W, 1206 ERJ-8GEYJ2R0V(STATIC)(RoHS)
R191 -Not Used NOT USED 37338
R192 RFFS39Resistor,SMT,MF,1210ohms,1%,1/10W,0603 RK73H1JLTD1211F 59124
R193 RAE21Resistor, SMT, MF, 49.9 Ohms,1% 1/4W RK73H2BL49R9F 59124
R194 RAE21Resistor, SMT, MF, 49.9 Ohms,1% 1/4W RK73H2BL49R9F 59124
R195 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R196 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R197 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R198 RFFS38Resistor,SMT,MF,1000ohms,1%,1/10W,0603 RK73H1JLTD1001F 59124
R199 RFFS39Resistor,SMT,MF,1210ohms,1%,1/10W,0603 RK73H1JLTD1211F 59124
R200 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R201 -Not Used NOT USED 37338
R202 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R203 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R204 RFFS89Resistor, SMT, MF, 75Kohms, 1%,1/10W, 0603 RK73H1JLTD7502F
R205 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R206 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R207 RFFS26Resistor,SMT,MF,100ohms,1%,1/10W,0603 RK73H1JLTD1000F 59124
R208 -Not Used NOT USED 37338
R209 -Not Used NOT USED 37338
R210 RAD75Resistor, SMT, 2 Ohms, 5%, 1/4W, 1206 ERJ-8GEYJ2R0V(STATIC)(RoHS)
R211 -Not Used NOT USED 37338
R212 -Not Used NOT USED 37338
R213 -Not Used NOT USED 37338
R214 -Not Used NOT USED 37338
R215 RAD58Resistor, SMT, 3.9 Ohms, 1%, 1W, 2512 ERJ-1TRQF3R9U
Page 77 of 104 NAPI152A
Continued from previous page
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R216 -Not Used NOT USED 37338
R217 -Not Used NOT USED 37338
R218 RAD58Resistor, SMT, 3.9 Ohms, 1%, 1W, 2512 ERJ-1TRQF3R9U
R219 -Not Used NOT USED 37338
R220 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R221 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R222 RAD75Resistor, SMT, 2 Ohms, 5%, 1/4W, 1206 ERJ-8GEYJ2R0V(STATIC)(RoHS)
R223 -Not Used NOT USED 37338
R224 -Not Used NOT USED 37338
R225 -Not Used NOT USED 37338
R226 RAD58Resistor, SMT, 3.9 Ohms, 1%, 1W, 2512 ERJ-1TRQF3R9U
R227 -Not Used NOT USED 37338
R228 -Not Used NOT USED 37338
R229 -Not Used NOT USED 37338
R230 RAD58Resistor, SMT, 3.9 Ohms, 1%, 1W, 2512 ERJ-1TRQF3R9U
R231 -Not Used NOT USED 37338
R232 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R233 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R234 -Not Used NOT USED 37338
R235 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R236 -Not Used NOT USED 37338
R237 -Not Used NOT USED 37338
R238 -Not Used NOT USED 37338
R239 -Not Used NOT USED 37338
R240 RAD75Resistor, SMT, 2 Ohms, 5%, 1/4W, 1206 ERJ-8GEYJ2R0V(STATIC)(RoHS)
R241 -Not Used NOT USED 37338
R242 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R243 RAD58Resistor, SMT, 3.9 Ohms, 1%, 1W, 2512 ERJ-1TRQF3R9U
R244 RAD58Resistor, SMT, 3.9 Ohms, 1%, 1W, 2512 ERJ-1TRQF3R9U
R245 -Not Used NOT USED 37338
R246 -Not Used NOT USED 37338
R247 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R248 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R249 RAD58Resistor, SMT, 3.9 Ohms, 1%, 1W, 2512 ERJ-1TRQF3R9U
R250 -Not Used NOT USED 37338
R251 -Not Used NOT USED 37338
R252 -Not Used NOT USED 37338
Page 78 of 104 NAPI152A
Continued from previous page
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R253 RAD58Resistor, SMT, 3.9 Ohms, 1%, 1W, 2512 ERJ-1TRQF3R9U
R254 -Not Used NOT USED 37338
R255 -Not Used NOT USED 37338
R256 RAD75Resistor, SMT, 2 Ohms, 5%, 1/4W, 1206 ERJ-8GEYJ2R0V(STATIC)(RoHS)
R257 -Not Used NOT USED 37338
R258 RFFS46Resistor,SMT,MF,4750ohms,1%,1/10W,0603 RK73H1JLTD4751F 59124
R259 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R260 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R261 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R262 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R263 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R264 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R265 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R266 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R267 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
R268 RFFS30Resistor,SMT,MF,221ohms,1%,1/10W,0603 RK73H1JLTD2210F 59124
RT01 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT02 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT03 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT04 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT05 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT06 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT07 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT08 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT09 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT10 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT11 RT55Thermistor, PTC, .005-.02 Ohms6A Hold RUEF600(RoHS)
RT12 RT55Thermistor, PTC, .005-.02 Ohms6A Hold RUEF600(RoHS)
RT13 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT14 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT15 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT16 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT17 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT18 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT19 RT19Thermistor, PTC, .05-.08 Ohms, 2.5A Hold RXE250 4G927
RT20 RT17Thermistor, PTC, .15-.25 Ohms, 1.1A Hold RXE110 06090
RT21 RT55Thermistor, PTC, .005-.02 Ohms6A Hold RUEF600(RoHS)
S01 SC40Switch, 8-position, DIP, 1PST 76SB08 81073
Page 79 of 104 NAPI152A
Continued from previous page
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
T01 TD46Signal Transformer, 1.1VA230V/36V DST-2-36 08779
TP07 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP15 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP25 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP26 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP27 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP28 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP29 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP37 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP49 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
U01 UDTS03IC,SMT,RS-485 Transceiver,Sgl,SOIC-8 DS36C278TM(STATIC)
27014
U02 UT102IC,DC-DC Converter,OUT .75V-5.5V@10A,IN 9-18V ATL010A0X43-SR(STATIC)
TYCO
U03 QK51Diode,Schottky,Dual 20A,A-K-A,TO-247 15V VRRM STPS40L15CW(STATIC)
STMICRO
U04 UT102IC,DC-DC Converter,OUT .75V-5.5V@10A,IN 9-18V ATL010A0X43-SR(STATIC)
TYCO
U05 UDLS03IC,SMT,CMOS,Hex Schm,Trig,Inv,SOIC-14 SN74AHCT14D(STATIC)
01295
U06 UDMS02IC, SMT, Micro, ADC, PWM,Flash, TQFP-64 ATMEGA128-16AI(STATIC)
1FN41
U07 UDSS02IC,SMT,Microprocessor Supervisor, SC70 ADM803-MAKS(STATIC)
24355
U08 UDLS02IC, SMT, CMOS, Octal Latch,SOIC-20 SN74AHC573DW(STATIC)
01295
U09 -Not Used NOT USED 37338
U10 UDTS03IC,SMT,RS-485 Transceiver,Sgl,SOIC-8 DS36C278TM(STATIC)
27014
U11 UT101IC,DC-DC Converter,OUT +/[email protected],15W, IN 9-36V AEE00CC18-L (STATIC)
ASTEC
U12 ULAS01IC,SMT,Opamp,Quad,Single Supply,SOIC-14 MC33074AD(STATIC) 04713
U13 UDMS01IC, SMT, SRAM, 32Kx8, SOIC-28(Wide) CY62256NLL-55SNXI(STATIC)(RoHS)
65786
Page 80 of 104 NAPI152A
Continued from previous page
NAPI152A Rack Interface PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
U14 UT101IC,DC-DC Converter,OUT +/[email protected],15W, IN 9-36V AEE00CC18-L (STATIC)
ASTEC
U15 UMAS01IC,SMT,ADC,10-Bit,11-ch,SPI,SOIC-20 TLC1543IDW(STATIC)
01295
U16 ULAS01IC,SMT,Opamp,Quad,Single Supply,SOIC-14 MC33074AD(STATIC) 04713
U17 ULAS02IC,SMT,Opamp,Quad,Rail-To-Rail,SOIC-14 TLV2374ID(STATIC) 01295
U18 UMDS01IC,SMT,DAC,8-Bit,4-ch,SPI,SOIC-14 TLV5620ID(STATIC) 64155
U19 UX83IC,SMT,2.5V Reference,0.1%,SOT-23-6 LT1790BIS6-2.5(STATIC)
64155
U20 ULAS02IC,SMT,Opamp,Quad,Rail-To-Rail,SOIC-14 TLV2374ID(STATIC) 01295
U21 UMAS01IC,SMT,ADC,10-Bit,11-ch,SPI,SOIC-20 TLC1543IDW(STATIC)
01295
U22 UT101IC,DC-DC Converter,OUT +/[email protected],15W, IN 9-36V AEE00CC18-L (STATIC)
ASTEC
U23 ULCS01IC,SMT,Comparator,Quad,SOIC-14 MC3302D(STATIC) 04713
U24 UDLS06IC,SMT,CMOS,Quad Tri-State Buffer, SOIC-14 MC74HC125AD(STATIC)
04713
U25 UT101IC,DC-DC Converter,OUT +/[email protected],15W, IN 9-36V AEE00CC18-L (STATIC)
ASTEC
U26 UDLS04IC,SMT,CMOS,8-Bit Shft Reg,Par I/P, SOIC-16 MC74HC165AD(STATIC)
04713
U27 UDLS03IC,SMT,CMOS,Hex Schm,Trig,Inv,SOIC-14 SN74AHCT14D(STATIC)
01295
U28 UDLS05IC,SMT,CMOS,8-Bit Shft Reg,Par O/P, SOIC-16 MC74HC595AD(STATIC)
04713
U29 UDAS01IC,SMT,Trans Array, 7 Darl.,SOIC-16 MC1413BD(STATIC) 04713
U30 UDOS01IC,SMT,Dual Optocoupler,SOIC-8 MOCD223-M(STATIC) 7D893
U31 UD70IC,SMT,Quad 2-input AND gate,SO-14 MC74ACT08D(STATIC)
ON SEMI
U32 UDTS03IC,SMT,RS-485 Transceiver,Sgl,SOIC-8 DS36C278TM(STATIC)
27014
U33 UDTS03IC,SMT,RS-485 Transceiver,Sgl,SOIC-8 DS36C278TM(STATIC)
27014
U34 UDTS03IC,SMT,RS-485 Transceiver,Sgl,SOIC-8 DS36C278TM(STATIC)
27014
U35 UDTS03IC,SMT,RS-485 Transceiver,Sgl,SOIC-8 DS36C278TM(STATIC)
27014
Y01 XFPS01Crystal,SMT,Fund,Par Res,11.0592MHz CMR309T11.0592MABJTR
3DX59
Page 81 of 104 NAPI152A
NAPI154 PDM Drive Distribution PWB
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C001 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C002 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C003 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C004 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C005 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C006 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C007 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C008 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C009 -Not Used NOT USED 37338
C010 -Not Used NOT USED 37338
C011 -Not Used NOT USED 37338
C012 -Not Used NOT USED 37338
C013 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C014 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C015 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C016 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C017 -Not Used NOT USED 37338
C018 -Not Used NOT USED 37338
C019 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C020 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C021 -Not Used NOT USED 37338
C022 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C023 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C024 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C025 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C026 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C027 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C028 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C029 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C030 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C031 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C032 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C033 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C034 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C035 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C036 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C037 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C038 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C039 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
Page 82 of 104 NAPI154
Continued from previous page
NAPI154 PDM Drive Distribution PWB
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C040 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C041 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C042 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C043 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C044 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C045 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C046 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C047 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C048 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C049 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C050 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C051 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C052 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C053 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C054 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C055 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C056 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C057 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C058 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C059 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C060 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C061 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C062 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C063 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C064 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C065 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C066 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C067 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C068 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C069 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C070 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C071 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C072 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C073 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C074 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C075 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C076 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C077 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C078 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
Page 83 of 104 NAPI154
Continued from previous page
NAPI154 PDM Drive Distribution PWB
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C079 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C080 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C081 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C082 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C083 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C084 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C085 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C086 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C087 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C088 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C089 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C090 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C091 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C092 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C093 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C094 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C095 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C096 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C097 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C098 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C099 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C100 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C101 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C102 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C103 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C104 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C105 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
J01 JT90Connector,Modular,2x4,RJ45,Jack 569262-1 AMP/TYCO
J02 JT90Connector,Modular,2x4,RJ45,Jack 569262-1 AMP/TYCO
J03 JT90Connector,Modular,2x4,RJ45,Jack 569262-1 AMP/TYCO
J04 JT90Connector,Modular,2x4,RJ45,Jack 569262-1 AMP/TYCO
J05 JT90Connector,Modular,2x4,RJ45,Jack 569262-1 AMP/TYCO
J06 JM44Conn, Modular Jack, RJ45, Shld, Side, PWB, 50u 556591-1 09482
J07 JM44Conn, Modular Jack, RJ45, Shld, Side, PWB, 50u 556591-1 09482
J08 -Not Used NOT USED 37338
J09 JQ33Conn, Plug, D-Sub, 9 pin, PWBMt K22-E9P-NJ 31781
L01 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L02 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
Page 84 of 104 NAPI154
Continued from previous page
NAPI154 PDM Drive Distribution PWB
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
L03 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L04 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L05 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L06 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L07 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L08 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L09 -Not Used NOT USED 37338
L10 -Not Used NOT USED 37338
L11 -Not Used NOT USED 37338
L12 -Not Used NOT USED 37338
L13 LA16Inductor, Choke, 2.5 Turns, JMtl 82-152-J 33062
R01 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R02 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R03 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R04 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R05 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R06 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R07 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R08 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R09 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R10 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R11 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R12 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R13 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R14 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R15 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R16 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R17 -Not Used NOT USED 37338
R18 -Not Used NOT USED 37338
R19 -Not Used NOT USED 37338
R20 -Not Used NOT USED 37338
R21 -Not Used NOT USED 37338
R22 -Not Used NOT USED 37338
R23 -Not Used NOT USED 37338
R24 -Not Used NOT USED 37338
R25 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
Page 85 of 104 NAPI154
Continued from previous page
NAPI154 PDM Drive Distribution PWB
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R26 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R27 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R28 -Not Used NOT USED 37338
R29 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R30 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R31 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R32 -Not Used NOT USED 37338
R33 -Not Used NOT USED 37338
R34 -Not Used NOT USED 37338
R35 -Not Used NOT USED 37338
R36 -Not Used NOT USED 37338
R37 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R38 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R39 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R40 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R41 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R42 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R43 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R44 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R45 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R46 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R47 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R48 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R49 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R50 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R51 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R52 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R53 -Not Used NOT USED 37338
R54 -Not Used NOT USED 37338
R55 -Not Used NOT USED 37338
R56 -Not Used NOT USED 37338
R57 -Not Used NOT USED 37338
R58 -Not Used NOT USED 37338
R59 -Not Used NOT USED 37338
R60 -Not Used NOT USED 37338
R61 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R62 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R63 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R64 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
Page 86 of 104 NAPI154
Continued from previous page
NAPI154 PDM Drive Distribution PWB
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R65 -Not Used NOT USED 37338
R66 -Not Used NOT USED 37338
R67 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R68 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R69 -Not Used NOT USED 37338
R70 -Not Used NOT USED 37338
R71 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R72 -Not Used NOT USED 37338
R73 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R74 -Not Used NOT USED 37338
R75 -Not Used NOT USED 37338
R76 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R77 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R78 -Not Used NOT USED 37338
TP01 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP02 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP03 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
U01 UT91IC,SMT,Quad RS-422 Receiver,16-SOIC DS26C32ATM(STATIC)
NATIONAL
U02 UT91IC,SMT,Quad RS-422 Receiver,16-SOIC DS26C32ATM(STATIC)
NATIONAL
U03 -Not Used NOT USED 37338
U04 UD67IC,SMT,Quad 2 to 1 DATA Sel/Mux 3 States Outputs,5V SN74HC257PW(STATIC)(ROHS)
TEXAS
U05 -Not Used NOT USED 37338
U06 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U07 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U08 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U09 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U10 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U11 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U12 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U13 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
Page 87 of 104 NAPI154
Continued from previous page
NAPI154 PDM Drive Distribution PWB
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
U14 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U15 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U16 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U17 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U18 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U19 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U20 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U21 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U22 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U23 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U24 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U25 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U26 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U27 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U28 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U29 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U30 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U31 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U32 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U33 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U34 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U35 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U36 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U37 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U38 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U39 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
Page 88 of 104 NAPI154
Continued from previous page
NAPI154 PDM Drive Distribution PWB
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
U40 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U41 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U42 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U43 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U44 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U45 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
Page 89 of 104 NAPI154
NAPI95A Power Module Interface PWB
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C01 CBP15Capacitor, Electrolytic, 470uF450V 381LR471M450A052 CORNELL
14655
C02 CBP15Capacitor, Electrolytic, 470uF450V 381LR471M450A052 CORNELL
14655
C03 CBP15Capacitor, Electrolytic, 470uF450V 381LR471M450A052 CORNELL
14655
C04 CBP15Capacitor, Electrolytic, 470uF450V 381LR471M450A052 CORNELL
14655
C05 CT41Capacitor, Elect, 1000uF 50V SME50VB102M16X25LL
1W344
CR01 QE28Diode, General Purpose, 400V,1A 1N4004 04713
CR02 QE28Diode, General Purpose, 400V,1A 1N4004 04713
CR03 QE28Diode, General Purpose, 400V,1A 1N4004 04713
CR04 QE28Diode, General Purpose, 400V,1A 1N4004 04713
CR05 QE28Diode, General Purpose, 400V,1A 1N4004 04713
CR06 QE28Diode, General Purpose, 400V,1A 1N4004 04713
CR07 QE28Diode, General Purpose, 400V,1A 1N4004 04713
CR08 QE28Diode, General Purpose, 400V,1A 1N4004 04713
DS01 QM49Diode,LED,Ultrabright,Grn,5mm 7383/V7C3-ARTA/MS(STATIC)
MARKTEC
DS02 QM49Diode,LED,Ultrabright,Grn,5mm 7383/V7C3-ARTA/MS(STATIC)
MARKTEC
DS03 QM49Diode,LED,Ultrabright,Grn,5mm 7383/V7C3-ARTA/MS(STATIC)
MARKTEC
DS04 QM49Diode,LED,Ultrabright,Grn,5mm 7383/V7C3-ARTA/MS(STATIC)
MARKTEC
E01 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E02 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E03 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E04 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E05 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E06 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E07 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E08 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E09 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E10 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
F01 FA34Fuse, 20A, 500Vdc, Non Time Delay, KLM KLM-20 71400
F02 FA34Fuse, 20A, 500Vdc, Non Time Delay, KLM KLM-20 71400
F03 FA34Fuse, 20A, 500Vdc, Non Time Delay, KLM KLM-20 71400
F04 FA34Fuse, 20A, 500Vdc, Non Time Delay, KLM KLM-20 71400
J01 JN59Conn,Edge Card,88 Contacts,Dual Row,30u Gold, M3 346-088-620-207 31781
J02 JN59Conn,Edge Card,88 Contacts,Dual Row,30u Gold, M3 346-088-620-207 31781
J03 JN59Conn,Edge Card,88 Contacts,Dual Row,30u Gold, M3 346-088-620-207 31781
J04 JN59Conn,Edge Card,88 Contacts,Dual Row,30u Gold, M3 346-088-620-207 31781
Page 90 of 104 NAPI95A
Continued from previous page
NAPI95A Power Module Interface PWB
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
J05 -Not Used NOT USED 37338
J06 JS12Conn, Plug, D-Sub, 25 pin, PWB Mt K22X-B25P-NJ 63590
J07 JU25MTA, Keyed Square Post HeaderAssy, 4 pin 647123-4 00779
J08 JU25MTA, Keyed Square Post HeaderAssy, 4 pin 647123-4 00779
J09 JU25MTA, Keyed Square Post HeaderAssy, 4 pin 647123-4 00779
J10 JU25MTA, Keyed Square Post HeaderAssy, 4 pin 647123-4 00779
J11 206-5028JMT01 Pin Mod 206-5028 37338
J12 206-5028JMT01 Pin Mod 206-5028 37338
R01 RBP25Resistor, Film, 100K Ohms, 5%, 2W GS-3, 100K OHMS 75042
R02 RBP25Resistor, Film, 100K Ohms, 5%, 2W GS-3, 100K OHMS 75042
R03 RBP25Resistor, Film, 100K Ohms, 5%, 2W GS-3, 100K OHMS 75042
R04 RBP25Resistor, Film, 100K Ohms, 5%, 2W GS-3, 100K OHMS 75042
XF01 FC27Fuse Clip, 13/32 Dia Fuse, PWB Mt 1A3400-09 71400
XF02 FC27Fuse Clip, 13/32 Dia Fuse, PWB Mt 1A3400-09 71400
XF03 FC27Fuse Clip, 13/32 Dia Fuse, PWB Mt 1A3400-09 71400
XF04 FC27Fuse Clip, 13/32 Dia Fuse, PWB Mt 1A3400-09 71400
Page 91 of 104 NAPI95A
NAPI95A/01 Power Module Interface PWB
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C01 CBP15Capacitor, Electrolytic, 470uF450V 381LR471M450A052 CORNELL
14655
C02 CBP15Capacitor, Electrolytic, 470uF450V 381LR471M450A052 CORNELL
14655
C03 CBP15Capacitor, Electrolytic, 470uF450V 381LR471M450A052 CORNELL
14655
C04 CBP15Capacitor, Electrolytic, 470uF450V 381LR471M450A052 CORNELL
14655
C05 CT41Capacitor, Elect, 1000uF 50V SME50VB102M16X25LL
1W344
CR01 QE28Diode, General Purpose, 400V,1A 1N4004 04713
CR02 QE28Diode, General Purpose, 400V,1A 1N4004 04713
CR03 QE28Diode, General Purpose, 400V,1A 1N4004 04713
CR04 QE28Diode, General Purpose, 400V,1A 1N4004 04713
CR05 QE28Diode, General Purpose, 400V,1A 1N4004 04713
CR06 QE28Diode, General Purpose, 400V,1A 1N4004 04713
CR07 QE28Diode, General Purpose, 400V,1A 1N4004 04713
CR08 QE28Diode, General Purpose, 400V,1A 1N4004 04713
DS01 QM49Diode,LED,Ultrabright,Grn,5mm 7383/V7C3-ARTA/MS(STATIC)
MARKTEC
DS02 QM49Diode,LED,Ultrabright,Grn,5mm 7383/V7C3-ARTA/MS(STATIC)
MARKTEC
DS03 QM49Diode,LED,Ultrabright,Grn,5mm 7383/V7C3-ARTA/MS(STATIC)
MARKTEC
DS04 QM49Diode,LED,Ultrabright,Grn,5mm 7383/V7C3-ARTA/MS(STATIC)
MARKTEC
E01 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E02 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E03 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E04 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E05 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E06 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E07 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E08 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E09 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
E10 HAC55Terminal,PC Screw 10-32,30 Amp 7787 KEYSTONE
F01 FA34Fuse, 20A, 500Vdc, Non Time Delay, KLM KLM-20 71400
F02 FA34Fuse, 20A, 500Vdc, Non Time Delay, KLM KLM-20 71400
F03 FA34Fuse, 20A, 500Vdc, Non Time Delay, KLM KLM-20 71400
F04 FA34Fuse, 20A, 500Vdc, Non Time Delay, KLM KLM-20 71400
J01 JN59Conn,Edge Card,88 Contacts,Dual Row,30u Gold, M3 346-088-620-207 31781
J02 JN59Conn,Edge Card,88 Contacts,Dual Row,30u Gold, M3 346-088-620-207 31781
J03 JN59Conn,Edge Card,88 Contacts,Dual Row,30u Gold, M3 346-088-620-207 31781
J04 JN59Conn,Edge Card,88 Contacts,Dual Row,30u Gold, M3 346-088-620-207 31781
Page 92 of 104 NAPI95A/01
Continued from previous page
NAPI95A/01 Power Module Interface PWB
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
J05 JS13Conn, Socket, D-Sub, 25 pin, PWB Mt K22-B25S-NJ 22421
J06 JS43Conn, Plug, D-Sub, 25 pin, Vert PWB 627 025 220 017 31781
J07 JU25MTA, Keyed Square Post HeaderAssy, 4 pin 647123-4 00779
J08 JU25MTA, Keyed Square Post HeaderAssy, 4 pin 647123-4 00779
J09 JU25MTA, Keyed Square Post HeaderAssy, 4 pin 647123-4 00779
J10 JU25MTA, Keyed Square Post HeaderAssy, 4 pin 647123-4 00779
J11 206-5028JMT01 Pin Mod 206-5028 37338
J12 206-5028JMT01 Pin Mod 206-5028 37338
R01 RBP25Resistor, Film, 100K Ohms, 5%, 2W GS-3, 100K OHMS 75042
R02 RBP25Resistor, Film, 100K Ohms, 5%, 2W GS-3, 100K OHMS 75042
R03 RBP25Resistor, Film, 100K Ohms, 5%, 2W GS-3, 100K OHMS 75042
R04 RBP25Resistor, Film, 100K Ohms, 5%, 2W GS-3, 100K OHMS 75042
XF01 FC27Fuse Clip, 13/32 Dia Fuse, PWB Mt 1A3400-09 71400
XF02 FC27Fuse Clip, 13/32 Dia Fuse, PWB Mt 1A3400-09 71400
XF03 FC27Fuse Clip, 13/32 Dia Fuse, PWB Mt 1A3400-09 71400
XF04 FC27Fuse Clip, 13/32 Dia Fuse, PWB Mt 1A3400-09 71400
Page 93 of 104 NAPI95A/01
NAPI98 RF Drive Distribution PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C001 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C002 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C003 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C004 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C005 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C006 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C007 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C008 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C009 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C010 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C011 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C012 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C013 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C014 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C015 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C016 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C017 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C018 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C019 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C020 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C021 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C022 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C023 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C024 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C025 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C026 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C027 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C028 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C029 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C030 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C031 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C032 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C033 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C034 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C035 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C036 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C037 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C038 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C039 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
Page 94 of 104 NAPI98
Continued from previous page
NAPI98 RF Drive Distribution PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C040 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C041 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C042 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C043 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C044 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C045 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C046 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C047 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C048 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C049 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C050 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C051 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C052 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C053 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C054 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C055 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C056 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C057 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C058 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C059 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C060 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C061 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C062 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C063 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C064 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C065 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C066 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C067 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C068 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C069 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C070 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C071 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C072 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C073 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C074 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C075 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C076 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C077 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C078 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
Page 95 of 104 NAPI98
Continued from previous page
NAPI98 RF Drive Distribution PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C079 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C080 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C081 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C082 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C083 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C084 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C085 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C086 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C087 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C088 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C089 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C090 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C091 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C092 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C093 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C094 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C095 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C096 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C097 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C098 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C099 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
C100 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C101 CCFS57Cap,SMT,Ceramic,10uF,20%,6.3V,X5R,0805 C2012X5R0J106M 54583
C102 CCFS07Cap,SMT,Ceramic,0.1uF,10%,50V,X7R,0805 C0805C104K5RAC 31433
C103 CCFS10Cap,SMT,Ceramic,1uF,10%,25V,,X7R,1206 C1206C105K3RAC 31433
J01 JT90Connector,Modular,2x4,RJ45,Jack 569262-1 AMP/TYCO
J02 JT90Connector,Modular,2x4,RJ45,Jack 569262-1 AMP/TYCO
J03 JT90Connector,Modular,2x4,RJ45,Jack 569262-1 AMP/TYCO
J04 JM44Conn, Modular Jack, RJ45, Shld, Side, PWB, 50u 556591-1 09482
J05 JQ33Conn, Plug, D-Sub, 9 pin, PWBMt K22-E9P-NJ 31781
L01 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L02 LS22Choke,SMT,Common Mode,2200 ohm,200mA,1206 DLW31SN222SQ2L(ROHS)
3EH09
L03 LA16Inductor, Choke, 2.5 Turns, JMtl 82-152-J 33062
R01 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R02 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R03 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R04 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R05 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
Page 96 of 104 NAPI98
Continued from previous page
NAPI98 RF Drive Distribution PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R06 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R07 RFFS01Resistor,SMT,MF,0.0ohms,Jumper,0603 RK73Z1JLTD 59124
R08 RAD12Resistor, SMT, MF, 82.5 Ohms,1% 1/4W RK73H2BL82R5F 59124
R09 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R10 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R11 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
R12 RFFS34Resistor,SMT,MF,475ohms,1%,1/10W,0603 RK73H1JLTD4750F 59124
TP01 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
TP02 HAJ66Terminal, SMT, Test Point, PWB TP-107-02-1-T(RoHS) COMPONENTS CORP
U01 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U02 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U03 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U04 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U05 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U06 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U07 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U08 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U09 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U10 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U11 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U12 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U13 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U14 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U15 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U16 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U17 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U18 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U19 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
Page 97 of 104 NAPI98
Continued from previous page
NAPI98 RF Drive Distribution PWB Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
U20 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U21 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U22 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U23 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U24 UD66IC,SMT,Quad RS-422 DIFF LineDriver DS26C31T/DS26C31M(STATIC)
NATIONAL
U25 UD72IC,SMT,Clock Driver,1-TO-10,Fast CMOS,SOIC,.3" IDT74FCT807CTS0(STATIC)(ROHS)
IDT
U26 UD72IC,SMT,Clock Driver,1-TO-10,Fast CMOS,SOIC,.3" IDT74FCT807CTS0(STATIC)(ROHS)
IDT
U27 UD72IC,SMT,Clock Driver,1-TO-10,Fast CMOS,SOIC,.3" IDT74FCT807CTS0(STATIC)(ROHS)
IDT
U28 UD72IC,SMT,Clock Driver,1-TO-10,Fast CMOS,SOIC,.3" IDT74FCT807CTS0(STATIC)(ROHS)
IDT
U29 UD72IC,SMT,Clock Driver,1-TO-10,Fast CMOS,SOIC,.3" IDT74FCT807CTS0(STATIC)(ROHS)
IDT
U30 UD72IC,SMT,Clock Driver,1-TO-10,Fast CMOS,SOIC,.3" IDT74FCT807CTS0(STATIC)(ROHS)
IDT
U31 UT91IC,SMT,Quad RS-422 Receiver,16-SOIC DS26C32ATM(STATIC)
NATIONAL
Page 98 of 104 NAPI98
NAPP10 Directional Coupler PWB Assy,NX100
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
C01 CB06Capacitor, Mica, Dipped, 9100pF 2% 500V CM07FD912G03 14655
C02 CB06Capacitor, Mica, Dipped, 9100pF 2% 500V CM07FD912G03 14655
C03 CB06Capacitor, Mica, Dipped, 9100pF 2% 500V CM07FD912G03 14655
C04 CB06Capacitor, Mica, Dipped, 9100pF 2% 500V CM07FD912G03 14655
C05 CB06Capacitor, Mica, Dipped, 9100pF 2% 500V CM07FD912G03 14655
C06 -Not Used NOT USED 37338
C07 -Not Used NOT USED 37338
C08 -Not Used NOT USED 37338
C09 -Not Used NOT USED 37338
C10 -Not Used NOT USED 37338
C11 -Not Used NOT USED 37338
C12 -Not Used NOT USED 37338
C13 CCG07Capacitor, Ceramic, 0.1uF 10%100V CKR06BX104KRV 56289
C14 CCG07Capacitor, Ceramic, 0.1uF 10%100V CKR06BX104KRV 56289
C15 CCG07Capacitor, Ceramic, 0.1uF 10%100V CKR06BX104KRV 56289
C16 CCG07Capacitor, Ceramic, 0.1uF 10%100V CKR06BX104KRV 56289
C17 CCG07Capacitor, Ceramic, 0.1uF 10%100V CKR06BX104KRV 56289
C18 CCG07Capacitor, Ceramic, 0.1uF 10%100V CKR06BX104KRV 56289
C19 CCG07Capacitor, Ceramic, 0.1uF 10%100V CKR06BX104KRV 56289
C20 CCG07Capacitor, Ceramic, 0.1uF 10%100V CKR06BX104KRV 56289
C21 CCG07Capacitor, Ceramic, 0.1uF 10%100V CKR06BX104KRV 56289
C22 CAP16Capacitor, Ceramic, 1.0uF 100V RPE114Z5U105M100V
91929
C23 CCP36Capacitor, Tantalum, Dipped, 10uF, 35V T351G106K035AT(RoHS) KEMET
96095
C24 CCG07Capacitor, Ceramic, 0.1uF 10%100V CKR06BX104KRV 56289
C25 CAP16Capacitor, Ceramic, 1.0uF 100V RPE114Z5U105M100V
91929
C26 CCP36Capacitor, Tantalum, Dipped, 10uF, 35V T351G106K035AT(RoHS) KEMET
96095
CR01 -Not Used NOT USED 37338
CR02 -Not Used NOT USED 37338
J01 JS21Conn, BNC, Recept, Rt Angle, PWB Mt R141665161 0GP12
J02 JS21Conn, BNC, Recept, Rt Angle, PWB Mt R141665161 0GP12
J03 JQ34Conn, Socket, D-Sub, 9 pin, PWB Mt K22-E9S-NJ KYCON
L01 LA16Inductor, Choke, 2.5 Turns, JMtl 82-152-J 33062
L02 LA16Inductor, Choke, 2.5 Turns, JMtl 82-152-J 33062
R01 RBP05Resistor, Film, 47 Ohms, 5% 2W GS-3, 47 OHMS 75042
R02 RBP05Resistor, Film, 47 Ohms, 5% 2W GS-3, 47 OHMS 75042
R03 RBP05Resistor, Film, 47 Ohms, 5% 2W GS-3, 47 OHMS 75042
R04 RBP05Resistor, Film, 47 Ohms, 5% 2W GS-3, 47 OHMS 75042
Page 99 of 104 NAPP10
Continued from previous page
NAPP10 Directional Coupler PWB Assy,NX100
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
R05 RBP07Resistor, Film, 100 Ohms, 5%2W GS-3, 100 OHMS 75042
R06 RK31Resistor, Film, 220 Ohms, 5%,2W GS-3, 220 OHMS 75042
R07 RAP07Resistor, Film, 330 Ohms, 2PC1/2W RL20S331G DALE 35005
R08 RC35Resistor, Film, 680 Ohms, 2PC1/2W RL20S681G 35005
R09 RAP09Resistor, Film, 1000 Ohms, 2PC 1/2W RL20S102G 35005
R10 RC41Resistor, Film, 2200 Ohms, 2PC 1/2W RL20S222G 35005
R11 RC33Resistor, Film, 470 Ohms, 2PC1/2W RL20S471G 35005
R12 RC33Resistor, Film, 470 Ohms, 2PC1/2W RL20S471G 35005
R13 RAB27Resistor, MF, 1.50K Ohms, 1PC1/4W MF1/4DL1501F 59124
R14 RAB22Resistor, MF, 562 Ohms, 1PC 1/4W MF1/4DL5620F 59124
R15 RBP05Resistor, Film, 47 Ohms, 5% 2W GS-3, 47 OHMS 75042
R16 RC33Resistor, Film, 470 Ohms, 2PC1/2W RL20S471G 35005
R17 RC33Resistor, Film, 470 Ohms, 2PC1/2W RL20S471G 35005
R18 RAB27Resistor, MF, 1.50K Ohms, 1PC1/4W MF1/4DL1501F 59124
R19 -Not Used NOT USED 37338
R20 RBP05Resistor, Film, 47 Ohms, 5% 2W GS-3, 47 OHMS 75042
S01 SD28Switch, 8-Position, Piano, DIP, 1PST 76PSB08 81073
U01 UT88IC,Amplifier,35MHz,CurrentFeedback,1.1A LT1210CT7(STATIC) 64155
U02 UT88IC,Amplifier,35MHz,CurrentFeedback,1.1A LT1210CT7(STATIC) 64155
Page 100 of 104 NAPP10
NARA52C Final Assy, NX100 RLS 4
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
A01 NAH57CBack Plane, RF Combiner(BOT-- >) 207-6050-12 37338
A02 NAH57C/01Back Plane, RF Combiner(TOP < --) 207-6050-13 37338
A03 NAH57CBack Plane, RF Combiner(BOT-- >) 207-6050-12 37338
A04 NAH57C/01Back Plane, RF Combiner(TOP < --) 207-6050-13 37338
A05 NAH57CBack Plane, RF Combiner(BOT-- >) 207-6050-12 37338
A06 NAH57C/01Back Plane, RF Combiner(TOP < --) 207-6050-13 37338
A07 NAH57CBack Plane, RF Combiner(BOT-- >) 207-6050-12 37338
A08 NAH57C/01Back Plane, RF Combiner(TOP < --) 207-6050-13 37338
A09 NAH57CBack Plane, RF Combiner(BOT-- >) 207-6050-12 37338
A10 NAH57C/01Back Plane, RF Combiner(TOP < --) 207-6050-13 37338
A11 NAE96C/01Control/Exciter Panel Assy.NX15/NX25-NX100 207-3000-06 37338
A12 -Not Used NOT USED 37338
A13 -Not Used NOT USED 37338
A14 -Not Used NOT USED 37338
A15 NAPI152ARack Interface PWB Assy 207-4030-01 37338
A16 NAPI98RF Drive Distribution PWB Assy 207-4050 37338
A17 NAPI154PDM Drive Distribution PWB 207-4065 37338
A18 NAX243AB+ Distribution Assy 207-7040-01 37338
A19 NAX243AB+ Distribution Assy 207-7040-01 37338
A20 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A21 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A22 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A23 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A24 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A25 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A26 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A27 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A28 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A29 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A30 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A31 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A32 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A33 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A34 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A35 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A36 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A37 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A38 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A39 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
Page 101 of 104 NARA52C
Continued from previous page
NARA52C Final Assy, NX100 RLS 4
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
A40 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A41 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A42 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A43 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A44 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A45 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A46 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A47 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A48 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A49 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A50 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A51 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A52 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A53 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A54 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A55 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A56 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A57 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A58 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A59 NAP39ARF Power Module Assy,NX Series 207-1100-01 37338
A60 207-8133NX Fan Tray Assy 207-8133 37338
A61 207-8133NX Fan Tray Assy 207-8133 37338
A62 207-8133NX Fan Tray Assy 207-8133 37338
A63 207-8133NX Fan Tray Assy 207-8133 37338
A64 207-8133NX Fan Tray Assy 207-8133 37338
A65 207-2010-06Control Door Assy-NX Series 207-2010-06 37338
A66 207-6111-02Voltage Probe Assy, NX100 207-6111-02 37338
A67 207-6213-04DO NOT USE - SEE NOTESCurrent Probe-NX25, 50,100,200
207-6213-04 37338
A68 NAFP106BDirectional Coupler (FWD/REFLPWR) for NX100 207-6214-08 37338
A69 183-6059Static Drain Choke Winding Detail Assy 183-6059 37338
A70 207-7120-05Capacitor Assy, 100kW Rack 207-7120-05 37338
A7010 RC44Resistor,Cap Discharge,27Komhs5%,13W UP10SR-27K-J 4TKQ5
A7011 RC44Resistor,Cap Discharge,27Komhs5%,13W UP10SR-27K-J 4TKQ5
A7012 RC44Resistor,Cap Discharge,27Komhs5%,13W UP10SR-27K-J 4TKQ5
A70R1 RC44Resistor,Cap Discharge,27Komhs5%,13W UP10SR-27K-J 4TKQ5
A70R2 RC44Resistor,Cap Discharge,27Komhs5%,13W UP10SR-27K-J 4TKQ5
A70R3 RC44Resistor,Cap Discharge,27Komhs5%,13W UP10SR-27K-J 4TKQ5
A70R4 RC44Resistor,Cap Discharge,27Komhs5%,13W UP10SR-27K-J 4TKQ5
A70R5 RC44Resistor,Cap Discharge,27Komhs5%,13W UP10SR-27K-J 4TKQ5
Page 102 of 104 NARA52C
Continued from previous page
NARA52C Final Assy, NX100 RLS 4
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
A70R6 RC44Resistor,Cap Discharge,27Komhs5%,13W UP10SR-27K-J 4TKQ5
A70R7 RC44Resistor,Cap Discharge,27Komhs5%,13W UP10SR-27K-J 4TKQ5
A70R8 RC44Resistor,Cap Discharge,27Komhs5%,13W UP10SR-27K-J 4TKQ5
A70R9 RC44Resistor,Cap Discharge,27Komhs5%,13W UP10SR-27K-J 4TKQ5
A71 215-8060-01Arc Detector Assy 215-8060-01 37338
A71U2 UB89Sensor, Flame UV photo tube,for UB88 R9454 OJXJ4
A72 207-7055-06100KW Rectifier Assy 207-7055-06 37338
A73 -Not Used NOT USED 37338
A74 207-8320-04Antenna Ground Switch Assy -NX50-NX100 207-8320-04 37338
C01 CCG42Capacitor, Ceramic, 50pF +10%15000V T500K99COGW8570 56699
C17 *See Master Work Order * SEE MASTER WORK ORDER
37338
C18 *See Master Work Order * SEE MASTER WORK ORDER
37338
C19 *See Master Work Order * SEE MASTER WORK ORDER
37338
C20 *See Master Work Order * SEE MASTER WORK ORDER
37338
C21 *See Master Work Order * SEE MASTER WORK ORDER
37338
C22 *See Master Work Order * SEE MASTER WORK ORDER
37338
C23 *See Master Work Order * SEE MASTER WORK ORDER
37338
C24 *See Master Work Order * SEE MASTER WORK ORDER
37338
C25 *See Master Work Order * SEE MASTER WORK ORDER
37338
C26 *See Master Work Order * SEE MASTER WORK ORDER
37338
C27 *See Master Work Order * SEE MASTER WORK ORDER
37338
C28 *See Master Work Order * SEE MASTER WORK ORDER
37338
C29 *See Master Work Order * SEE MASTER WORK ORDER
37338
C30 *See Master Work Order * SEE MASTER WORK ORDER
37338
C31 *See Master Work Order * SEE MASTER WORK ORDER
37338
C32 *See Master Work Order * SEE MASTER WORK ORDER
37338
C33 *See Master Work Order * SEE MASTER WORK ORDER
37338
F12 FA35Fuse, 15A, 500Vdc, Non Time Delay KLM KLM-15 71400
F13 FA35Fuse, 15A, 500Vdc, Non Time Delay KLM KLM-15 71400
L01 TZ96AInductor, Choke, 2.5mH, 75Adc EC207094 Rev A
L02 TZ96AInductor, Choke, 2.5mH, 75Adc EC207094 Rev A
Page 103 of 104 NARA52C
Continued from previous page
NARA52C Final Assy, NX100 RLS 4
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
L03 TZ96AInductor, Choke, 2.5mH, 75Adc EC207094 Rev A
L04 TZ96AInductor, Choke, 2.5mH, 75Adc EC207094 Rev A
L05 TZ96AInductor, Choke, 2.5mH, 75Adc EC207094 Rev A
L06 TZ96AInductor, Choke, 2.5mH, 75Adc EC207094 Rev A
L07 207-6182L1 Coil Detail Assy 207-6182 37338
L08 207-6132L2 Coil Detail Assy 207-6132 37338
L09 207-6138L3 Coil Detail Assy 207-6138 37338
T01 *See Master Work Order * SEE MASTER WORK ORDER
37338
U01 -Not Used NOT USED 37338
U02 UC59Current Sensor, Hall, 400 amp HCTF400V4B15 1AA44
U03 UG53Power Supply.15V,1500W,Univ.Input, PFC, Rem ON/OFF
RSP-1500-15 SL575
U04 UG53Power Supply.15V,1500W,Univ.Input, PFC, Rem ON/OFF
RSP-1500-15 SL575
U05 UG54Power Supply,48V,480W,Univ.Input,PFC, Rem ON/OFF SP-480-48 SL575
U06 UG54Power Supply,48V,480W,Univ.Input,PFC, Rem ON/OFF SP-480-48 SL575
U07 UG57Power Supply, 12V@200W, 85-264VAC, PFC SP-200-12 S8116
U08 QM11Surge Arrestor, 8500V +/-10 PC GXH85 1C532
XF12 FD27Fuseblock, 13/32" x 1-1/2", 2-Pole, 30A, 600V BMM603-2SQ(RoHS)
NAX243A B+ Distribution Assy
REFDES NAUTEL #DESCRIPTION VENDOR # OEM CODE
F01 FD24Fuse, 70A, 600V, Class J, OpenIndicator AJT70 3WCG0
F02 FD24Fuse, 70A, 600V, Class J, OpenIndicator AJT70 3WCG0
F03 FD24Fuse, 70A, 600V, Class J, OpenIndicator AJT70 3WCG0
F04 FD24Fuse, 70A, 600V, Class J, OpenIndicator AJT70 3WCG0
F05 FD24Fuse, 70A, 600V, Class J, OpenIndicator AJT70 3WCG0
J01 JDP26Conn, Coax, BNC, Recept, 50ohm UG1094/U 02660
R01 RD27Resistor, Film, 470K Ohms, 2PC 1/2W RL20S474G 35005
R02 RD27Resistor, Film, 470K Ohms, 2PC 1/2W RL20S474G 35005
R03 RD17Resistor, Film, 68K Ohms, 2PC1/2W RL20S683G 35005
R04 RD17Resistor, Film, 68K Ohms, 2PC1/2W RL20S683G 35005
Page 104 of 104 NAX243A
NX100 Troubleshooting Manual Wiring/connector lists
Issue 3.3 2017-03-31 Page 3-1
Section 3: Wiring/connector lists
This section contains the wiring information for the hard-wired assemblies of the transmitter, and applicable connector mating information.
Wiring lists provided
Wiring lists are provided in tabular format. Table 3.1 on page 3-2 lists the tables containing wiring information. These tables provide non-printed wiring pattern, point-to-point (source and destination) interconnection information.
Wiring lists not provided
Separate wiring lists are not provided for some assemblies, including:
• Assemblies that have a separate maintenance manual. Refer to the appropriate maintenancemanual for detailed wiring information for these assemblies, if provided.
• Assemblies that have their wiring information shown in tables on their assembly detail draw-ing(s). Refer to the Mechanical Drawings section of this manual for detailed wiring informationfor these assemblies.
Connector mating information
Where applicable, a connector mating table is provided after the corresponding wiring list. Table 3.2 on page 3-2 identifies all provided connector information.
Wire colours
Every effort is made to manufacture assemblies using the wire colour shown in the Color column of the wiring list tables. Sometimes, a white wire will be substituted for the listed colour. In such cases, wires must be identified by their assigned numbers.
Printed wiring board patterns
Printed wiring pattern information for printed wiring boards (PWBs) is beyond the scope of this manual, and therefore not provided.
NX100 Troubleshooting Manual Wiring/connector lists
Page 3-2 Issue 3.3 2017-03-31
Table 3.1: Wiring Lists Provided
Table # Description
Table 3.3 NX100 Transmitter - Wiring List (page 3-3)
Table 3.5 Fan Tray Assembly (Nautel Part # 207-8133) - Wiring List (page 3-15)
Table 3.2: Connector Mating Information
Table # Description
Table 3.4 NX100 Transmitter - Connector Mating Information (page 3-9)
NX100 Troubleshooting Manual Wiring/connector lists
Issue 3.3 2017-03-31 Page 3-3
Table 3.3: NX100 Transmitter - Wiring List
Source Destination Wire # Color Size Remarks
A18E1 A1A1E1 1 Black 6
A18E2 A2A1E1 2 Black 6
A18E3 A3A1E1 3 Black 6
A18E4 A4A1E1 4 Black 6
A18E5 A5A1E1 5 Black 6
A19E1 A6A1E1 6 Black 6
A19E2 A7A1E1 7 Black 6
A19E3 A8A1E1 8 Black 6
A19E4 A9A1E1 9 Black 6
A19E5 A10A1E1 10 Black 6
A72U01-B(-) A1A1E2 11 Black 6
A72U01-B(-) A2A1E2 12 Black 6
A72U01-B(-) A3A1E2 13 Black 6
A72U01-B(-) A4A1E2 14 Black 6
A72U01-B(-) A5A1E2 15 Black 6
A72U01-B(-) A6A1E2 16 Black 6
A72U01-B(-) A7A1E2 17 Black 6
A72U01-B(-) A8A1E2 18 Black 6
A72U01-B(-) A9A1E2 19 Black 6
A72U01-B(-) A10A1E2 20 Black 6
A1A1E1 A70C01-(+) 21 White 10
A2A1E1 A70C02-(+) 22 White 10
A3A1E1 A70C03-(+) 23 White 10
A4A1E1 A70C04-(+) 24 White 10
A5A1E1 A70C05-(+) 25 White 10
A70C06-(+) A70C05-(+) - White 10
A6A1E1 A70C07-(+) 26 White 10
A7A1E1 A70C08-(+) 27 White 10
A8A1E1 A70C09-(+) 28 White 10
A9A1E1 A70C10-(+) 29 White 10
A10A1E1 A70C12-(+) 30 White 10
A70C11-(+) A70C12-(+) - White 10
A1A1E2 A70C01-(-) 31 Black 10
A2A1E2 A70C02-(-) 32 Black 10
A3A1E2 A70C03-(-) 33 Black 10
NX100 Troubleshooting Manual Wiring/connector lists
Page 3-4 Issue 3.3 2017-03-31
Source Destination Wire # Color Size Remarks
A4A1E2 A70C04-(-) 34 Black 10
A5A1E2 A70C05-(-) 35 Black 10
A70C06-(-) A70C05-(-) - Black 10
A6A1E2 A70C07-(-) 36 Black 10
A7A1E2 A70C08-(-) 37 Black 10
A8A1E2 A70C09-(-) 38 Black 10
A9A1E2 A70C10-(-) 39 Black 10
A10A1E2 A70C12-(-) 40 Black 10
A70C11-(-) A70C12-(-) - Black 10
A70U9-(AC1) A70C01-(+) 41 White 14
A70U9-(AC2) A70C02-(+) 42 White 14
A70U10-(AC1) A70C03-(+) 43 White 14
A70U10-(AC2) A70C04-(+) 44 White 14
A70C06-(+) A70U11-(AC1) 45 White 14
A70U12-(AC1) A70C07-(+) 46 White 14
A70U12(AC2) A70C08-(+) 47 White 14
A70U13-(AC1) A70C09-(+) 48 White 14
A70U13-(AC2) A70C10-(+) 49 White 14
A70C11-(+) A70U11-(AC2) 50 White 14
A70U9-(+) A70K1-2 51 White 14
A70U10-(+) A70K1-2 52 White 14
A70U11-(+) A70K1-2 53 White 14
A70U12-(+) A70K1-2 54 White 14
A70U13-(+) A70K1-2 55 White 14
P01-01 P06-01 101 White 22
P01-02 GND near A64 102 Black 22
P01-03 P07-24 103 White 22
P01-04 P06-02 104 White 22
P01-05 GND near A64 105 Black 22
P01-06 P07-11 106 White 22
P02-01 P06-04 107 White 22
P02-02 GND near A64 108 Black 22
P02-03 P07-23 109 White 22
P02-04 P06-05 110 White 22
P02-05 GND near A64 111 Black 22
P02-06 P07-10 112 White 22
P03-01 P06-07 113 White 22
Table 3.3: NX100 Transmitter - Wiring List
NX100 Troubleshooting Manual Wiring/connector lists
Issue 3.3 2017-03-31 Page 3-5
Source Destination Wire # Color Size Remarks
P03-02 GND near A64 114 Black 22
P03-03 P06-25 115 White 22
P03-04 P06-08 116 White 22
P03-05 GND near A64 117 Black 22
P03-06 P06-12 118 White 22
P04-01 P07-01 119 White 22
P04-02 GND near A64 120 Black 22
P04-03 P06-24 121 White 22
P04-04 P07-02 122 White 22
P04-05 GND near A64 123 Black 22
P04-06 P06-11 124 White 22
P05-01 P07-04 125 White 22
P05-02 GND near A64 126 Black 22
P05-03 P06-23 127 White 22
P05-04 P07-05 128 White 22
P05-05 GND near A64 129 Black 22
P05-06 P06-10 130 White 22
P08-01 P14-01 131 Black 20
P08-02 P14-02 132 White 20
P08-03 P14-03 133 White 20
P08-04 P14-04 134 Black 20
P08-05 P14-05 135 White 22
P08-06 P14-06 136 White 22
P08-07 P14-07 137 Black 20
P08-08 P14-08 138 White 20
P08-09 P14-09 139 Black 20
P08-10 P14-10 140 Centre 22 1-Conductor shielded
P08-23 P14-23 140 Shield -
P08-12 P14-12 141A White 22 2-Conductor shielded
P08-24 P14-24 141B Black 22
P08-25 P14-25 141 Shield -
P08-14 P14-14 143 Black 22
P08-15 P14-15 144 White 20
P08-16 P14-16 145 White 20
P08-18 P14-18 146 White 22
P08-19 P14-19 147 White 22
P08-21 P14-21 148 White 22
Table 3.3: NX100 Transmitter - Wiring List
NX100 Troubleshooting Manual Wiring/connector lists
Page 3-6 Issue 3.3 2017-03-31
Source Destination Wire # Color Size Remarks
P09-01 A72U1TB1-1 149 White 22
P09-02 A72U1TB1-5 150 White 22
P09-03 A72U1TB3-8 151 Black 22
P09-08 P16-04 154 Black 24
P09-10 P16-01 155 White 24
P09-11 A72U1TB3-10 156 White 22
P09-12 P28 (CENTER) 157 Centre 24 1-Conductor shielded
P09-25 P28 (BODY) 157 Shield -
P09-14 A72U1TB2-1 158 Black 22
P09-15 A72U1TB2-2 159 Black 22
P09-16 A72U1TB3-3 160 White 22
P09-17 A72U1TB3-16 161 Centre 22 1-Conductor shielded
P09-04 A72U1TB3-17 161 Shield -
P09-18 A72U1TB1-8 162 Centre 22 1-Conductor shielded
P09-06 A72U1TB2-3 162 Shield -
P09-19 A72U1TB1-4 163 Centre 22 1-Conductor shielded
P09-05 A72U1TB2-3 163 Shield -
P09-20 A72U1TB3-5 164 White 22
P09-21 P16-03 165 White 24
P09-23 P16-02 166 White 24
P09-24 A72U1TB3-8 167 Black 22
P10-01 P15-01 168 White 20
P10-05 P15-05 169 White 22
P10-06 P15-06 170 Black 20
P11-01 U5-(V-) 171 Black 20
P11-02 U5-(V-) 172 Black 20
P11-03 U5-(V+) 173 White 20
P11-06 P26-03 174 White 22
P11-07 P22-02 175 White 22
P11-08 P19-02 176 White 22
P11-09 P25-04 177 White 22
P11-10 P26-04 178 White 22
P11-11 A70K1-AUX-C 179 White 22
P11-12 A72U1TB3-6 180 White 22
P11-14 U6-(V-) 181 Black 20
P11-15 U6-(V-) 182 Black 20
P11-16 U5-(V+) 183 White 20
Table 3.3: NX100 Transmitter - Wiring List
NX100 Troubleshooting Manual Wiring/connector lists
Issue 3.3 2017-03-31 Page 3-7
Source Destination Wire # Color Size Remarks
P11-17 U6-(V+) 184 White 20
P11-18 P18-03 185 Center 24
P11-20 P18-01 - Shield -
P11-21 P18-02 186 Center 24
P11-25 P18-01 - Shield -
P11-23 P19-01 187 Black 22
P11-24 P22-01 188 Black 22
P12-01 U3-(V+) 189 White 10
P12-02 U3-(V-) 190 Black 10
P13-01 U4-(V+) 191 White 10
P13-02 U4-(V-) 192 Black 10
P17-01 P27-04 193 Centre 24 Coax,50 Ohms RG188A/U
P17-06 P27-01 193 Shield -
P17-03 P23-Centre 194 Centre 24 Coax,50 Ohms RG188A/U
P17-08 P23-Core 194 Shield -
P17-04 P24-Centre 195 Centre 24 Coax,50 Ohms RG188A/U
P17-09 P24-Core 195 Shield -
P17-02 P27-02 196 White 22
P17-05 P27-06 197 White 22
P17-07 P27-05 198 Centre 24 Coax,50 Ohms RG188A/U
P17-06 P27-08 198 Shield -
E3 XF12-2 202 White 14
E4 XF12-4 203 White 14
U3-L XF12-2 204 White 14
U3-N XF12-4 205 White 14
U3-G GND near U4 206 Black 14
U3-L U4-L 207 White 14
U3-N U4-N 208 White 14
U3-G U4-G 209 Black 14
U6-L XF12-2 210 White 14
U6-N XF12-4 211 White 14
U6-G U4-G 212 Black 14
U6-L U5-L 213 White 14
U6-N U5-N 214 White 14
U6-G U5-G 215 Black 14
U7-L U5-L 216 White 14
U7-N U5-N 217 White 14
Table 3.3: NX100 Transmitter - Wiring List
NX100 Troubleshooting Manual Wiring/connector lists
Page 3-8 Issue 3.3 2017-03-31
Source Destination Wire # Color Size Remarks
U7-G U5-G 218 Black 14
GND Near A64 GND near U4 219 Black 14
U7-(V+) P30-04 220 White 18
U7-(V-) P30-01 221 Black 18
U7-(V+) E1-A 222 White 18
U7-(V-) E2-A 223 Black 18
U7-(V-) GND near U4 224 Black 18
P11-04 U6-(V+) 225 White 20
P11-05 P25-03 226 White 22
U7-L A70K1-TB1-1 227 White 14
U7-N A70K1-TB1-2 228 White 14
A72U1TB3-4 A70K1-AUX-NO 229 White 22
P35-6 A11A1TB1-11 231 Centre 24
P35-8 A11A1TB1-12 231 Shield -
W65P1-(+) E1-B - Blk/Ws 18
W65P1-(-) E2-B - Black 18
W61P1 W61P2 -
W62P1 W62P2 -
W64P1 W64P2 -
W66P1-Pin W66P2-Socket -
W67P1-Pin W67P2-Socket -
W69P1-PIN W69P2-Socket -
W70P1-PIN W70P2-Socket -
U3-(V+) U4-(V+) 232 Black 8
U3-(V-) U4-(V-) 233 Black 8
U4-(V-) GND near U4 234 Black 8
A69-B GND near A69 235 Yellow 14
A69-A RF OUT Stud 236 Yellow 14
A68C1-TOP RF OUT Stud 237 Yellow 14
A72A02E1 LINE-COM 238 White 14
LINE-COM XF12-1 239 White 12
LINE 1-E2 XF12-3 240 White 12
U8E1 E5 243 Yellow 18
Fr Door GND - Braid 14
Rr Door GND - Braid 14
Ex Door GND
GND 1
GND 2
GND 3 - Braid 14
L1-1 A72U1- B(+) 300 Black 2
Table 3.3: NX100 Transmitter - Wiring List
NX100 Troubleshooting Manual Wiring/connector lists
Issue 3.3 2017-03-31 Page 3-9
Source Destination Wire # Color Size Remarks
L2-1 301 Black 2
L3-1 302 Black 2
L4-1 303 Black 2
L5-1 304 Black 2
L6-1
A72U1- B(+)
A72U1- B(+)
A72U1- B(+)
A72U1- B(+)
A72U1- B(+) 305 Black 2
L1-2 306 Black 2
L2-2 307 Black 2
L3-2 308 Black 2
L4-2 309 Black 2
L5-2 310 Black 2
L6-2
A18E12
A18E13
A18E14
A19E12
A19E13
A19E14 311 Black 2
A72U1-B(-) - Green 2
LINE 1-E2 - Black 2
LINE 1-E2 - Black 2
LINE 2-E2 - Black 2
LINE 2-E2 - Black 2
LINE 3-E2 - Black 2
LINE 3-E2 - Black 2
E6 (RF OUT) - Green 2
E6 (RF OUT)
GND near
A72U1
A72U01-LINE 1 A72U01-LINE 1 A72U01-LINE 2 A72U01-LINE 2 A72U01-LINE 3 A72U01-LINE 3 STA-GND
STA-GND - Green 2
Table 3.4: NX100 Transmitter - Connector Mating Information
Connector Mate Note
A66E1 C1E1 Voltage Probe
E1 E1 Butt splice
E2 E2 Butt splice
E3 A15E1 To Rack Interface PWB
E4 A15E2 To Rack Interface PWB
P1 A60J1 Fan Tray
P2 A61J1 Fan Tray
P3 A62J1 Fan Tray
P4 A63J1 Fan Tray
P5 A64J1 Fan Tray
P6 A15J8 To Rack Interface PWB
Table 3.3: NX100 Transmitter - Wiring List
NX100 Troubleshooting Manual Wiring/connector lists
Page 3-10 Issue 3.3 2017-03-31
Connector Mate Note
P7 A15J9 To Rack Interface PWB
P8 A15J11 To Rack Interface PWB
P9 A15J12 To Rack Interface PWB
P10 A15J14 To Rack Interface PWB
P11 A15J15 To Rack Interface PWB
P12 To Rack Interface PWB
P13 To Rack Interface PWB
P14 To Control/Display PWB
P15 To PDM Distribution PWB
P16 To DC Current Probe
P17 To Control/Display PWB
P18 Arc Detector PWB
P19 To U3 15V P/S
P22 To U3 15V P/S
P23 RF Current sample
P24 Voltage sample
P25 To U5 48V P/S
P26 To U6 48V P/S
P27 To Directional Coupler
P28 B+ sample
P30 To Front Door Computer
P35 To Front Door Computer
P36 To Control/Display PWB
W1P1
W1P2
W2P1
W2P2
W3P1
W3P2
W4P1
W4P2
W5P1
W5P2
W6P1
W6P2
W7P1
W7P2
A15J6
A15J7
A11A1J1
A17J9
U2J1
A11A1J3B
A71J1
U3CN3
U4CN3
A67J1
A66J1
U5CN1
U6CN1
A68A1J3
A18J1
A65A1U1CPU12V1
A65A1U1F_PANEL1
A1A1J6
A20A1J1
A17J1A
A30A1J1
A17J1B
A40A1J1
A17J1E
A50A1J1
A17J1F
A21A1J1
A17J2A
A31A1J1
A17J2B
A41A1J1
A17J2E
Table 3.4: NX100 Transmitter - Connector Mating Information
NX100 Troubleshooting Manual Wiring/connector lists
Issue 3.3 2017-03-31 Page 3-11
Connector Mate Note
W8P1 A51A1J1
W8P2 A17J2F
W9P1 A22A1J1
W9P2 A17J3A
W10P1 A32A1J1
W10P2 A17J3B
W11P1 A42A1J1
W11P2 A17J3E
W12P1 A52A1J1
W12P2 A17J3F
W13P1 A23A1J1
W13P2 A17J4A
W14P1 A33A1J1
W14P2 A17J4B
W15P1 A43A1J1
W15P2 A17J4E
W16P1 A53A1J1
W16P2 A17J4F
W17P1 A24A1J1
W17P2 A17J5A
W18P1 A34A1J1
W18P2 A17J5B
W19P1 A44A1J1
W19P2 A17J5E
W20P1 A54A1J1
W20P2 A17J5F
W21P1 A25A1J1
W21P2 A17J1C
W22P1 A35A1J1
W22P2 A17J1D
W23P1 A45A1J1
W23P2 A17J1G
W24P1 A55A1J1
W24P2 A17J1H
W25P1 A26A1J1
W25P2 A17J2C
W26P1 A36A1J1
Table 3.4: NX100 Transmitter - Connector Mating Information
NX100 Troubleshooting Manual Wiring/connector lists
Page 3-12 Issue 3.3 2017-03-31
Connector Mate Note
W26P2 A17J2D
W27P1 A46A1J1
W27P2 A17J2G
W28P1 A56A1J1
W28P2 A17J2H
W29P1 A27A1J1
W29P2 A17J3C
W30P1 A37A1J1
W30P2 A17J3D
W31P1 A47A1J1
W31P2 A17J3G
W32P1 A57A1J1
W32P2 A17J3H
W33P1 A28A1J1
W33P2 A17J4C
W34P1 A38A1J1
W34P2 A17J4D
W35P1 A48A1J1
W35P2 A17J4G
W36P1 A58A1J1
W36P2 A17J4H
W37P1 A29A1J1
W37P2 A17J5C
W38P1 A39A1J1
W38P2 A17J5D
W39P1 A49A1J1
W39P2 A17J5G
W40P1 A59A1J1
W40P2 A17J5H
W41P1 A16J1A
W41P2 A7A1J11
W42P1 A16J1C
W42P2 A9A1J11
W43P1 A16J1E
W43P2 A7A1J12
W44P1 A16J1G
W44P2 A9A1J12
Table 3.4: NX100 Transmitter - Connector Mating Information
NX100 Troubleshooting Manual Wiring/connector lists
Issue 3.3 2017-03-31 Page 3-13
Connector Mate Note
W45P1 A16J2A
W45P2 A8A1J11
W46P1 A16J2C
W46P2 A10A1J11
W47P1 A16J2E
W47P2 A10A1J12
W48P1 A16J2G
W48P2 A8A1J12
W49P1 A16J1B
W49P2 A6A1J12
W50P1 A16J1D
W50P2 A4A1J12
W51P1 A16J1F
W51P2 A2A1J12
W52P1 A16J1H
W52P2 A6A1J11
W53P1 A16J2B
W53P2 A5A1J12
W54P1 A16J2D
W54P2 A3A1J12
W55P1 A16J2F
W55P2 A4A1J11
W56P1 A16J2H
W56P2 A1A1J12
W57P1 A16J3B
W57P2 A2A1J11
W58P1 A16J3D
W58P2 A1A1J11
W59P1 A16J3F
W59P2 A3A1J11
W60P1 A16J3H
W60P2 A5A1J11
W61P1 A11A1J15A PDM
W61P2 A17J6 PDM
W62P1 A11A1J15B PDM
W62P2 A17J7 PDM
W64P1 A11A1J14A RF Drive
Table 3.4: NX100 Transmitter - Connector Mating Information
NX100 Troubleshooting Manual Wiring/connector lists
Page 3-14 Issue 3.3 2017-03-31
Connector Mate Note
W64P2 A16J4 RF Drive
W65P1 A65U4P/S To Front Door Monitor
W66P1 A11A1J2 Streaming Bus
W66P2 A65A1U1COM3 Streaming Bus
W67P1 A11A1J3A Serial Bus
W67P2 A65U1COM1 Serial Bus
W69P1 A15J1 Add Labels to W69
W69P2 A2A1J6 Add Labels to W69
W70P1 A15J5 Add Labels to W70
W70P2 A10A1J6 Add Labels to W70
Table 3.4: NX100 Transmitter - Connector Mating Information
NX100 Troubleshooting Manual Wiring/connector lists
Issue 3.3 2017-03-31 Page 3-15
Table 3.5: Fan Tray Assembly (Nautel Part # 207-8133) - Wiring List
Source Destination Wire # Colour Size RemarksJ1-01 E1 1 Red 22
J1-02 E2 2 Black 22
J1-03 E3 3 Yellow 22
J1-04 E4 4 Red 22
J1-05 E5 5 Black 22
J1-06 E6 6 Yellow 22
Cut wire 3" (V+)
Cut wire 3" (V-)
Cut wire 3" (TACH)
Cut wire 13" (V+)
Cut wire 13" (V-)
Cut wire13" (TACH)
NX100 Troubleshooting Manual Wiring/connector lists
Page 3-16 Issue 3.3 2017-03-31
NX100 Troubleshooting Manual Reading Electrical Schematics
Issue 3.3 2017-03-31 Page 4-1
Section 4: Reading Electrical Schematics
This section contains electrical schematics and logic diagrams for the transmitter. Block diagrams, simplified electrical schematics, and logic diagrams may be included. Refer to Table 4.1 on page 4-5 for an itemized listing.
Component values
Unless otherwise specified on the logic or schematic diagram, the following defaults apply:
• Resistor values are shown in ohms (K = 1,000 and M = 1,000,000)
• Resistor power ratings are not shown when less than 0.5 W
• Capacitor values are shown in microfarads (uF)
• Unidentified diodes are part number 1N4938 (Nautel Part # QAP29)
Graphic symbols
The graphic symbols used on electrical schematics are in accordance with American National Standard ANSI Y32.2-1975 - Graphic Symbols for Electrical and Electronic Diagrams.
Logic symbols
The logic symbols used on electrical schematics and logic diagrams are in accordance with American National Standard ANSI Y32.14-1975 - Graphic Symbols for Logic Diagrams.
Reference designations
Referenced designations were assigned in accordance with American Society of Mechanical Engineers ASME Y14.44-2008 - Reference Designations for Electrical and Electronic Parts and Equipment.
Each electrical symbol is identified with its basic reference designation. To obtain the full reference designation for a specific part, prefix this basic identifier with the reference designation assigned to all higher assemblies. For example, the complete designation for a resistor (R1) on a printed wiring board (A1), that is part of a larger board (A2), would be A2A1R1.
NX100 Troubleshooting Manual Reading Electrical Schematics
Page 4-2 Issue 3.3 2017-03-31
Unique symbols
Nautel uses unique symbols on electrical schematics to describe logic (two-state) signals. These signals differ from single-state signals or analog signals that may have multiple values.
Type of inputs and outputs
On electrical schematics, names used to describe logic (two-state) input and output signals are prefixed with a # symbol.
Logic level convention
The # prefix identifies an input or output signal that has two distinct states: high and low.
The suffix on an input or output signal name identifies the active (true) state of the signal. The high suffix (+) indicates the more positive of the two levels used to represent the logic states. The low suffix (-) indicates the less positive of the two levels.
Two types of logic, positive and negative, may be represented on a particular schematic. In positive logic, high represents the active (true) state, and low represents the inactive (false) state. In negative logic, low represents the active (true) state, and high represents the inactive (false) state.
Identifying schematic diagrams
Each electrical schematic in this section is identified by a number that is both the figure number and the page number. The numbers are assigned sequentially are prefixed by the letters SD. The electrical schematics and logic diagrams included in this section are listed in Table 4.1 on page 4-5.
Structure of schematics
The electrical schematics are structured in a hierarchical format that is based on function and signal flow. Wherever practical, the signal flow is from left to right. Normally, inputs originate on the left-hand side and outputs extend to the right-hand side. Exceptions are shown by an arrow indicating the direction of signal flow.
Note: The physical location of a part or assembly was not necessarily a factor during creation of the schematic. The full reference designation assigned to a part or assembly, in conjunction with the family tree (see Section 2, “Parts Lists” on page 2-1) and the assembly detail drawings (see Section 6, “Mechanical Drawings” on page 6-1), will identify its location.
NX100 Troubleshooting Manual Reading Electrical Schematics
Issue 3.3 2017-03-31 Page 4-3
Figures SD-1 through SD-4 identify each major stage and its detailed interconnection. Each stage contains cross-references that identify which blocks are the signal sources for inputs, or the destinations for outputs.
When a sub-function is treated as a block in figures SD-1 through SD-4, its detailed circuit information is included in its own schematic drawing(s), which is also included in this section.
Locating schematic diagram(s) for a functional block
The text inside a functional block provides the key to locating its schematic diagram(s).
1. When a functional block is assigned a reference designation (e.g., A2A1), refer to the family trees in Section 2, “Parts Lists” on page 2-1. Follow the family tree branches to the block that contains the desired reference designation, and associated Nautel nomenclature (e.g., NAPA34A Modulator/Power Amplifier PWB). Note the reference designations and Nautel nomenclatures of all higher assemblies in the path.Example: A20 NAP39A RF Power Module > A20A1 NAPA34A Modulator/Power Amplifier PWB.
2. Refer to Table 4.1 on page 4-5 and use the reference designation and Nautel nomenclature toidentify the appropriate schematic diagram(s).Example: NAPA34A Modulator/Power Amplifier PWB is shown on schematic SD-23.
3. If necessary, refer to the referenced figure (e.g., SD-23) in the schematics at the end of thissection and locate the next, lower-level assembly. Then, repeat this procedure until thedesired schematic diagram is found.
Locating a part or assembly on a schematic
The full reference designation assigned to a part or assembly is the key to physically locating that part or assembly.
1. Refer to the family trees in Section 2, “Parts Lists” on page 2-1.
Note: Full reference designations contain the assembly hierarchical coding. When the end item is divided into units (cabinets), the first coding is a unit number (1, 2, 3, etc.). When the end item is divided into assemblies, the first coding is an assembly number (A1, A2, A3, etc.). If a unit or an assembly is divided into sub-assemblies, assembly coding that identifies assembly relationship (1A1, A2A1, A2A1A1, etc.) is added.
NX100 Troubleshooting Manual Reading Electrical Schematics
Page 4-4 Issue 3.3 2017-03-31
2. Follow the family tree branches to the block that contains the desired reference designation,while noting the Nautel nomenclatures and names of all higher assemblies in the path.Example: A20 NAP39A RF Power Module > A20A1 NAPA34A Modulator/PowerAmplifier PWB.
3. Refer to Table 6.1 in Section 6, “Mechanical Drawings” on page 6-1. Use the Nautelnomenclature and name of each family tree block in the path, starting at the highest assembly– this is normally Figure MD-1 – to determine the figure number(s) for that assembly.Example: NAPA34A Modulator/Power Amplifier PWB is shown on MD-16.
4. Refer to the referenced figure (e.g., MD-6) in Section 6.1, “List of Mechanical Drawings” onpage 6-2 to locate the desired part or assembly.
Note: The drawings in the Mechanical Drawings section depict the assembly detail of the transmitter and its modules and assemblies.
NX100 Troubleshooting Manual Reading Electrical Schematics
Issue 3.3 2017-03-31 Page 4-5
Table 4.1: List of Electrical Schematics
Figure # TitleSD-1 NX100 Transmitter - Ac-Dc Power Stage
SD-2 NX100 Transmitter - Exciter Stage
SD-3 NX100 Transmitter - Control/Monitor Stage
SD-4 NX100 Transmitter - RF Power Stage (Sheet 1 of 2)
SD-5 NX100 Transmitter - RF Power Stage (Sheet 2 of 2)
SD-6 NX100 Transmitter - 10 kW RF Power Block
SD-7 NAPC160B/01 Control/Interface PWB (Sheet 1 of 7)
SD-8 NAPC160B/01 Control/Interface PWB (Sheet 2 of 7)
SD-9 NAPC160B/01 Control/Interface PWB (Sheet 3 of 7)
SD-10 NAPC160B/01 Control/Interface PWB (Sheet 4 of 7)
SD-11 NAPC160B/01 Control/Interface PWB (Sheet 5 of 7)
SD-12 NAPC160B/01 Control/Interface PWB (Sheet 6 of 7)
SD-13 NAPC160B/01 Control/Interface PWB (Sheet 7 of 7)
SD-14
SD-15
SD-16
SD-17
SD-18
SD-19
SD-20
SD-21
SD-22
SD-23
SD-24
SD-25
NAPI106 Remote Interface PWB
NAPX46 GPS Sync PWB (Optional)
NAPI151 USB Audio Interface PWB (Optional)
NAPI152A Rack Interface PWB (Sheet 1 of 3)
NAPI152A Rack Interface PWB (Sheet 2 of 3)
NAPI152A Rack Interface PWB (Sheet 3 of 3)
NAPI98 RF Drive Distribution PWB (Sheet 1 of 2)
NAPI98 RF Drive Distribution PWB (Sheet 2 of 2)
NAPI154 PDM Distribution PWB (Sheet 1 of 2)
NAPI154 PDM Distribution PWB (Sheet 2 of 2)
NAP39A RF Power Module and NAPA34A Modulator/Power Amplifier PWB (Sheet 1 of 2)
NAP39A RF Power Module and NAPA34A Modulator/Power Amplifier PWB (Sheet 2 of 2)
NX100 Troubleshooting Manual Reading Electrical Schematics
Page 4-6 Issue 3.3 2017-03-31
Issue 3.3 2017-03-31 SD-1
Figure SD-1: NX100 Transmitter - Ac-Dc Power Stage
P21
GND
LINE 2
LINE 1
G
L
N
G
L
G
L
G
L
CN1
A
CN1
CN3
CN3
6
3
4
5
1
X0
X3
X2
LOADX1
+15V
GND
15A
P11
P13
P11
E4
E3
15A
1
43
6
P9
P11
P9
P? J1
GND
+15V
-15V
B
+
J1
J1
A19
A18
U9
A70
STAGE
TO
LINE 3
N
G
N
L
N
N
CN1
CN2
4
1
5
2
5
2
6
3
3
1
4
F12
P12
F13
2
5
P8
C
A
-
P16
3
68K0.5W
R4
68K0.5W
R4
U12
13W27KR9
13W27KR10
ASSY
13W27KR11
13W27KR12
TO
STAGE
2
6
0.5W470KR2
0.5W470KR2
13W27KR3
13W27KR4
13W27KR5
AC POWER3-PHASE
200W V-
U7
DETECTOR 1ARC
43
480WV-SUPPLY
V+
P253
A
48V POWER
1
P221500W
U4 V-
REMOTE SENSING (-)LOAD SHARE
6
8P20
2P191500W
15V POWERU3 V+
H3
H1
LINE
T1
INHIBIT 48V (B) -INHIBIT 48V (B) +
+48V RETURN
+48V (B)
INHIBIT 48V (A) -INHIBIT 48V (A) +
+15V RETURN (B)
# 15V PS OK (A) -
+15V RETURN (A)+15V (A)
AC-2
J11
J15
J15
J15
J6 J12
E2
INTERFACE
(PART 1 OF 6)
440
380400
340
50/60 Hz
+30V
GND RECT FAN 1
+48V (RECT FAN 2)
+48V (RECT FAN 1)
# B+ CHARGE +# INHIBIT SCR -
B+ SAMPLE
RECTIFIER TEMP
# PHASE LOST -
4
3
TB3
1
TB2
5
1
ASSY
A72
ASSYINDICATOR
A72A1
5
17
TB3
ASSYRECTIFIER
4
1
2
U2
J1
70A
F470A
F370A
F270A
70AF1
B+ DISTRIBUTION
70AF5
F4
F3
F2
E2
E1
2 1
R1350350W
GBPC3508
GBPC3508U10
GND
GND
GND
GND
INTERNAL BUS (+)
-15V
B+ SAMPLE
-15V
+15V
+15V
+5V+5V
+5V+5V
B+ RETURN (9)
B+ RETURN (7)B+ RETURN (6)
B+ (10)
B+ (6)
B+ RETURN (5)B+ RETURN (4)B+ RETURN (3)
B+ RETURN (1)
B+ (5)
B+ (4)
B+ (3)
B+ (2)
B+ (1)
GBPC3508U11
STAGE
TOCONTROL/
EXCITER
RF POWER
SOURCE
FROM
12V POWER V+SUPPLY
P26B
P18A472
3ASSY
U6
SUPPLY V-
48V POWER
4
480W
V+
B2
15V POWER
U5
SUPPLY
REMOTE SENSING (+)
7
V+
1
V-SUPPLY
H2
S2070239 V1
# ARC DETECT -
+48V RETURN
+48V (A)
# 15V PS OK (B) -
+15V (B)
GND
AC-COM
AC-1
AC-3
J7
J12
PWBE1
RACKA15
420
360
TAPVAC (L-L)
+12V
+30V RETURN
B+ LEVEL CONTROL
GND
GND RECT FAN 2
TACH (RECT FAN 2)
TACH (RECT FAN 1)
DC CURRENT
10
6
8
8
4
2
3
TB1
RECTIFIER
ADS4
ADS3
AC POWER
t°U1RT1
16
A72U1
P16
2.5mHL6
2.5mHL5
2.5mHL2
2.5mHL3
L12.5mH
R368K0.5W
F5
E3
E2
E5
E4
R368K0.5W
70A
70A
70A E3
E4
E5
F170A
B+ DISTRIBUTION
10,000450V
C7
13W27KR7
10,000450V
C9
13W27KR8
10,000450V
C1110,000450V
C10
CAPACITOR
U13
+12V
GND
INTERNAL BUS (-)
+15V
+15V
B+ RETURN (10)
B+ RETURN (8)
10,000450V
C12
B+ (9)
B+ (8)
B+ (7)
B+ RETURN (2)
MONITOR
ADS5
-
+
B12.5mH
L4
E1
0.5W
R1470K
0.5W
R1470K 10,000
450V
C1
13W
R127K
13W27KR2
10,000450V
C310,000450V
C510,000450V
C410,000450V
C6
13W27KR6
1420
725
25
1
12106
1014
16
84
3
195
2
56
16
2412
4
627
20
11
24
16
5
814
21
2
1
8
AT NO LOAD 310VAC (L-L)
10
4
3
1 SENSORCURRENT
E12
GBPC3508
GBPC3508
9
4
24
2315
21
18
21
15
2
18
17
1
9
3
7
25
21
17
8 1
12
3
11
23 6
15
18
19
E123
POWER TRANSFORMER
E13
E14
-
+
B2
2
HALL EFFECTE13
E14
2
1
K1
C NCNO
10,000450V
C8
AC AC AC AC
J1 P28
AC AC AC AC AC AC
E12
10,000450V
C2
Issue 3.3 2017-03-31 SD-2
Figure SD-2: NX100 Transmitter - Exciter Stage
STAGE
FROM
FROM
TX (-)
J5
J1
P17
P42
W2P1
GND-15V
+5V+5V
1 kHz1 PPS
B
A
J18
J16
P17
TO
STAGE
RX (-)
TX (+)
J8
J2
P14
W1P1
PWB
+15V
GND
J2
J2
PWB
PWB
J19
J17
S2070233 V2
GNDGND
GNDGND
INTERNAL BUS (-)
-15V
+15V
+15V+15V
+5V+5V
+5V+5V
58
P43
SHIELDSHIELD 7
8
SHIELDEXPORTER
SHIELD5
RX (+) 32
+5V
GND
109
7
54
2
8
6
43
1W2P2
B8B3
J3B4
B7
B1
9
41
2524
23
J121
16
3
19
65
A1
A6
109
7
54
2
8
6
43
1
INTERFACE
(PART 1 OF 4)
25
2412
16
2210
8
76
J14
DIGITAL152
GND 22
GND J12311
J18
1825
24
1716
22
208
7
J154
AM EXCITER15DIGITAL
GND 22
GND J12311
J16
GND
DUMP 3 (EXCITER B)DUMP 2 (EXCITER B)
GNDDUMP 1 (EXCITER B)
GNDGNDGNDGND
PDM 8 (EXCITER B)PDM 7 (EXCITER B)PDM 6 (EXCITER B)PDM 5 (EXCITER B)
PDM 3 (EXCITER B)PDM 2 (EXCITER B)PDM 1 (EXCITER B)RF DRIVE (EXCITER B) (-)
GNDGND
DUMP 3 (EXCITER A)
GNDDUMP 1 (EXCITER A)
GND
GNDGND
PDM 8 (EXCITER A)
PDM 6 (EXCITER A)PDM 5 (EXCITER A)
PDM 3 (EXCITER A)
PDM 1 (EXCITER A)RF DRIVE (EXCITER A) (-)
J15
J14
DUMP (+)DUMP (+)PDM 2 (-)PDM 3 (-)
PDM 2 (+)PDM 1 (-)
PDM 1 (+)
DUMP (+)PDM 2 (-)PDM 3 (-)
PDM 3 (+)
PDM 1 (-)PDM 1 (+)
RF DRIVE 2 (-)RF DRIVE 2 (+)
(N/U)(N/U)
(N/U)RF DRIVE 1 (-)
RF DRIVE 1 (+)
-15V
+15V
STAGE
GND
INTERNAL BUS (+)
B+ SAMPLE
-15V
+15V
6
4
6
1
+3.3V
8
6
3
PWB 1
7
5
2
W1P2
J4 P41
B9
B6
14
7
12
10
8
15
J22A3
2
18
8
J216
3
1
7
J205
2
J8P40
A11A1CONTROL/
J2
18
13
17
20
9
19
5
AM EXCITER
J19
3
A11A3
10
J2
8
13
9
19
12
10
3
J17
6
A11A22
10
8
GND
GND
GND
PDM 9 (EXCITER B)
PDM 4 (EXCITER B)
GND
GND
GND
DUMP 2 (EXCITER A)
PDM 9 (EXCITER A)
PDM 4 (EXCITER A)
PDM 7 (EXCITER A)
PDM 2 (EXCITER A)
J3
PDM 3 (+)
DUMP (+)
PDM 2 (+)
(N/U)
RF POWER
RF CURRENT SAMPLE
RF VOLTAGE SAMPLE
REFLECTED POWER SAMPLE
FORWARD POWER SAMPLE
AC-DC POWER
(OPTIONAL)
A11A7
FROM LAN/
-15V 23
+5V+5V
141
# PDM INHIBIT - 1
BALANCED AUDIO (-) 14
BALANCED AUDIO (+) 24
ANALOG AES/EBU 20
SERIAL DATA 9
SERIAL CLOCK 7
1 PPS 4
INTERNAL BUS (-) 3
INTERNAL BUS (+) 17
16CURRENT SAMPLE (EXCITER B)
19VOLTAGE SAMPLE (EXCITER B) 25
1123
14
EXT 10 MHz# PDM INHIBIT - 1
(N/U)(N/U)
BALANCED AUDIO (-) 14
BALANCED AUDIO (+) 24(N/U)(N/U)
IQ AES/EBUANALOG AES/EBU 20
(N/U)(N/U)
SERIAL DATA 9
SERIAL CLOCK 7(N/U)
INTERNAL BUS (+)
4SERIAL DATA (-)
INTERNAL BUS (-) 3
INTERNAL BUS (+) 17(N/U)
SERIAL CLOCK (-)
16SERIAL CLOCK (+)
(N/U)
1925VOLTAGE SAMPLE (EXCITER A)
SERIAL FRAME (+)
10MHz
B8
B6B5
GROUP B
B3
B1W62P1
A7INTERFACE
A5A4(PART 2 OF 4)
GROUP A
A2
A8
A6A5
A3
A1W64P1
B5
RF POWER
EXGINE
GND 11
+15V 21
GND
EXT 10 MHz
IQ AES/EBU 21
2
SERIAL FRAME 12
1 kHz 15
6
# ADDRESS (EXCITER B) - 18
5
B+ SAMPLE 13
21
21
SERIAL FRAME
1
2
12
(N/U)
INTERNAL BUS (-)
15
# ADDRESS (EXCITER A) +
6
18
5CURRENT SAMPLE (EXCITER A)
SERIAL DATA (+)
SERIAL FRAME (-)
B+ SAMPLE 13
B4
B7
A8
A3
B2
A6
PWB
A11A1CONTROL/
A4
A1
A7
W61P1
A2
B2
STREAMING BUS (EXCITER B)# RF DRIVE LATCH (EXCITER B) -
STREAMING BUS (EXCITER A)# RF DRIVE LATCH (EXCITER A) -
RF DRIVE (EXCITER B) (+)
RF DRIVE (EXCITER A) (+)
Issue 3.3 2017-03-31 SD-3
Figure SD-3: NX100 Transmitter - Control/Monitor Stage
J9
J7
PDM
AES 1
AES 2
AUDIO
GND
(+)
GND
(+)
(-)
(+)
SHLD
(-)
SHLD
(+)
J22
8
6
4
2
J24
GND
TB1
(USB)
USB USB
COM2
AUDIO
CPU*
J2 (-)
PS
TX
RX
GND
(N/U)
TX
RX
GND
+5V
GND
(+)
(-)
(+)
(-)
(+)
(-)
(+)
(+)
J23
CTS
GND
DSR
RXD
DCD
J1
J6
J5
J4
J3
J6
J8
(-)
(-)
(-)
(+)
SHLD
J8
1
3
5
7
J2
J3
VGA
USB
PWB
SHLD
(+)
COM
VGA
1 KHz
1 PPS
(N/U)
+5V
GND
GND
(-)
(-)
J7
J24
N/C
DTR
RTS
TXD
GPS ANTENNA
GNDGND
EXTERNAL +15V SUPPLY
EXTERNAL +15V SUPPLY
GND
N/C
# DIGITAL INPUT 15 -
GND
# DIGITAL INPUT 14 -
# DIGITAL INPUT 13 -
GND
# DIGITAL INPUT 11 -
# DIGITAL INPUT 10 -GND
# DIGITAL INPUT 09 -
# DIGITAL INPUT 07 -
# DIGITAL INPUT 06 -
# DIGITAL INPUT 05 -
# DIGITAL INPUT 04 -GND
# DIGITAL INPUT 02 -
# DIGITAL INPUT 01 -
STAGE
FROM
J2
(OPTIONAL)
A11A5
EXT 10 MHz
SYSTEM
BALANCED
PWB
A11A4
# SYNK OK (GPS) -
INTERNAL BUS (+)
1 PPS (GPS)
SYNC (GPS)
+5V (GPS)
J10
J11
CONTROL/
(PART 3 OF 4)
EXTERNAL +15V SUPPLY
EXTERNAL +15V SUPPLY
GND
# DIGITAL INPUT 16 -
# DIGITAL INPUT 14 -
# DIGITAL INPUT 12 -
GND
# DIGITAL INPUT 10 -
# DIGITAL INPUT 08 -
GND
# DIGITAL INPUT 06 -
# DIGITAL INPUT 04 -
GND
# DIGITAL INPUT 02 - TB1
(N/U)
GND
(N/U)
STREAM(+)
(N/U)
GND
(N/U)
STREAM(-)
(N/U)
DSR
RTS
DTR
DCD
TXD
AES/EBU AUDIO (*)
99
7
6
7
6
44
2
1
2
1
P35
P30
(USB)
USB PS2
FAN
COM3
MEMORY, CF
MEMORY IC
MOTHERBOARD
AUIF_PANEL1
(OPTIONAL)
INTERFACE
A11A6
9
7
6
4
2
1
9
8
6
4
3
1
99
77
66
44
22
11
9
8
6
4
3
1
-
+
(OPTIONAL)
FROMSYSTEM
PWB(OPTIONAL)
FROMINTERLOCKCOMBINER
10 MHz
U4
6
7
J274
1
2
25
4
19
7
5
18
1
22
PWBINTERFACE
11
(PART 4 OF 4)
A11A18
8
J13 (RS-232)6
5
3
1
RF MONITOR SAMPLE
9 +15V (EXTERNAL)
+15V
+15VJ2
21
20
25
GND 23
GND 20
21
18
GND 15
16
13
GND PWB10
11
REMOTEA11A4
8
GND 5
6
3
1
ANALOG OUTPUT 3
ANALOG OUTPUT 2
2
ANALOG OUTPUT 1
GND
4
N/C23
GND5
7
8
N/C
GND1
2
GND
4
7
6
3
2
GND5
7P34
# DIGITAL INPUT 16 -
# DIGITAL INPUT 12 -
N/C
# DIGITAL INPUT 08 -
GND
# DIGITAL INPUT 03 -
AC-DC POWER
GPSPWB
J1
INTERLOCK
INHIBIT
+15V
+15V
ANALOG
J2
REMOTEINTERFACE
(PART 1 OF 2)
# ADDRESS (GPS) -
10 MHz (GPS)
INTERNAL BUS (+)
INTERFACEPWB
J12
GND
A11A1
# DIGITAL INPUT 15 -
# DIGITAL INPUT 11 -
# DIGITAL INPUT 13 -
# DIGITAL INPUT 09 -
# DIGITAL INPUT 07 -
# DIGITAL INPUT 03 -
# DIGITAL INPUT 05 -
# DIGITAL INPUT 01 -
CTS
(N/U)
W66P1
GND
RXD
W67P1
10
88
W66P2
5
3
5
3
W67P2
# SBC RESET -
MOUSE *
(*)
B1
A1U3
A1U5
COM1
COMPUTER
A1U1
CPU12V1
USB
J1
10
5
8
3
7
2
5
55
88
33
7
2
5
W65P1
CONTROLLER
CONTROL
TOUCH
USER
8
3
5
16
J5
10
14
13
CONTROL/21
24
DEBUG
7
4
9
2
10 GNDTB1
24
22
19
17
14
12
9
7
4
2
ANALOG OUTPUT 4
3
1
1
4
6
3
5
8
4
6
S2070301 V1
B8
B9
B6
B3
B4
B1
3
2
INTERFACE PWB TO EITHER AES 1 OR AES 2 AUDIO INPUT. 3
1
1
2
5
25
24
7
8
22 91
2
19
7
64
17 47
6
15
14
2
11
12 A93
10
9 A6
A75
6
7 A48
5
4 A1
A22
2 1254
7
1
KEYBOARD *
MONITOR
ETHERNET
9
97
6
7
64
42
1
92
1
7
6
4
2
1
8
1
# INTERLOCK -
* SHOWN FOR REFERENCE ONLY
DOOR ANALOG OUTPUT 4
ANALOG OUTPUT 2A65
ANALOG OUTPUT 1
# DIGITAL OUTPUT 15 -
# DIGITAL OUTPUT 14 -
# DIGITAL OUTPUT 13 -
# DIGITAL OUTPUT 11 -
# DIGITAL OUTPUT 10 -
# DIGITAL OUTPUT 09 -
# DIGITAL OUTPUT 07 -
# DIGITAL OUTPUT 06 -SCREEN
# DIGITAL OUTPUT 05 -GRAPHICAL
# DIGITAL OUTPUT 03 -
# DIGITAL OUTPUT 02 -
# DIGITAL OUTPUT 01 -
INTERFACE
ADVANCED
B7
B5
B2
NOTE: CONNECT AES/EBU AUDIO FROM OPTIONAL USB AUDIO
1
2
3
23
8
6
3
18
13
16
11 A8
5
3
5
8
4
2
8
3
6
1
A3
A5
11
3
6
1
7
+12V
8
2
3
KEYBOARD *
10
10
8
8
5
8
3
5
3
5
3
6
4
CONTROL/DISPLAY ANALOG OUTPUT 3
# DIGITAL OUTPUT 16 -
(PART 2 OF 2)
# DIGITAL OUTPUT 12 -
# DIGITAL OUTPUT 08 - INTERFACE
DISPLAY/
# DIGITAL OUTPUT 04 -
# DIGITAL OUTPUT 16 -
# DIGITAL OUTPUT 14 -
# DIGITAL OUTPUT 12 -
# DIGITAL OUTPUT 13 -
# DIGITAL OUTPUT 10 -
# DIGITAL OUTPUT 08 -
# DIGITAL OUTPUT 09 -
# DIGITAL OUTPUT 06 -
# DIGITAL OUTPUT 05 -
# DIGITAL OUTPUT 02 -
# DIGITAL OUTPUT 15 -
# DIGITAL OUTPUT 11 -
# DIGITAL OUTPUT 07 -
# DIGITAL OUTPUT 04 -
# DIGITAL OUTPUT 03 -
Issue 3.3 2017-03-31 SD-4
Figure SD-4: RF Power Stage (Sheet 1 of 2)
PDM
P10
P15
W62P2
W61P2
J14
J9
P7
J9
+5V
GND
(N/U
)
(N/U
)(N
/U)
J1
(N/U
)
J2
J2
J1
J2
J2
A60
A30A20
A31A21
A50A40
A51A41
J9 J8
J4
J4
J3
J4
J4
A61
J2
A32A22
A33A23
A4A3T2
A4A2T2
A4A2T1
A52A42
A53A43
P6
J8
J1
J1
J5
J1
J1
A62
J3
A35A25
A55A45
STAGE
P6
J8
J1
J2
J1
J2
J4
A8A1J11
A8A1J12
A37A27
GND
GNDGND
ASSY
A7A1
A7A3T2
A7A2T2
A7A2T1
STAGE
P6
J8
J1
PDM
J2
J2
J1
J1
ASSY
A10A1
(N/U)
GND
GNDGND
+48V
+15V+15V
+15V+15V
W39P1
W36P1
W35P1
W42P2
W52P2
ASSY
A9A1
A9A1J6
W63P2
W64P2
J13
J5
112 3
+48
V2
+48
V1
5 76
P1
9
J1
J1
J1
J1 FAN
A2A2 A2A3 A1A3
10 23
P2
+48
V5
+48
V4
J3
J3
J3
FAN
A4A2 A4A3
A4A3T1
A3A3
FROM
12
+48
V8
+48
V7
J5
J5
J5
FAN
A6A3
FROM
11
+48
V2
+48
V1
J2
FAN
10KW
A7A3T1
FROM
10
+48
V5
+48
V4
PWB
A17
J4
J1
(N/U)
+48V
+15V
+15V
W40P1
10KW
FAN
TACH
(REA
R)
FAN
TACH
(REA
R)FA
N TA
CH (F
RONT
)
FAN
TACH
(REA
R)
FAN
TACH
(REA
R)
FAN
TACH
(REA
R)
GROUP C
GROUP B
GROUP A
EXCITERSTAGE
GND6
+5V1
+5V
+5V51
J88
J7PDM 8
DUMP (+) 7DUMP (-) 8
J6PDM 3 (-)
PDM 2 (+)PDM 3 (+)
54
PDM 1 (+) 1
8
J445
12
STAGE B+ (1)
B+ (2)
5
4
3
P6
J8 18
1615
191
PWB2425
A15 1312
2021
89
GND
(N/U
)
35
H7H8
H4H5
J2 W56P1PWB H1
H2
A16 F7F8
F3F4
J1 W51P1F1
C
W5P2A
AW2P2
G
W7P2PWB E
W4P2A17
E7E6
E2E3
W3P2
D6D7
PWB D3D4
J3A16 W58P1
B5B6
B2B3
J3 W57P1
A2A1E1
RF POWER
ASSYTRANSFORMER
A2A1INTERFACE PWB
(N/U)18
GND
GNDGND
1615
+48V+48V RETURN
191
+15V RETURN+15V RETURN
2425
+15V RETURN
+15V RETURN+15V RETURN
1312
+15V+15V
2021
+15V+15V
89
FAN TACH (F)
MODULE BUS (+)MODULE BUS (-)
35
(TOP ROW)
RF DR 2 (+)RF DR 2 (-)
RF DR 2 (+)RF DR 2 (-)
RF DR 1 (-)
A2A1J11RF DR 1 (+)
RF DR 2 (-)
RF DR 1 (-)RF DR 2 (+)
RF DR 1 (+)RF DR 2 (+)
A2A1J12RF DR 1 (+)
PDM CABLE
A21A1J1PDM CABLE
PDM CABLEA30A1J1
PDM CABLE (SAME AS W3)
W7P1PDM CABLE (SAME AS W3)
W4P1
DUMP (+)
PDM 3 (-)PDM 2 (-)
PDM 1 (-)PDM 2 (+)
W3P1
RF DR 1 (-)RF DR 2 (+)
RF DR 2 (+)
RF DR 1 (-)RF DR 1 (+)
RF DR 2 (-)
RF DR 2 (-)RF DR 1 (-)
RF DR 1 (-)RF DR 1 (+)
RF POWER
ASSYTRANSFORMER
A1A1INTERFACE PWB
A1A1J6
POWER BLOCK
A1A3T2A51A1J1
A41A1J1
A1A2T2
A1A2T1
STAGE B+ (3)
B+ (4)
5
4
3
P7 P6
PWBINTERFACE
A15(PART 3 OF 6)
G7G8
G4G5
J1PWB
W44P1G1G2
A16 D7D8
D3D4
J1 W50P1D1
C
W13P2A
AW10P2
G
E
PDMDISTRIBUTION
E7E6(PART 2 OF 5)
E2E3
F6F7
PWB F3F4
DISTRIBUTION
A16 J3(PART 3 OF 10)
D5D6
D2D3
J2
A4A1E1
RF POWER
ASSYTRANSFORMER
A4A1INTERFACE PWB
(N/U)18
GND
GNDGND
1615
+48V+48V RETURN
191
+15V RETURN+15V RETURN
2425
+15V RETURN
+15V RETURN+15V RETURN
1312
+15V+15V
2021
+15V+15V
89
FAN TACH (F)
MODULE BUS (+)MODULE BUS (-)5
3
(TOP ROW)
7 RF DR 2 (+)8 RF DR 2 (-)
4 RF DR 2 (+)5 RF DR 2 (-)
RF DR 1 (-)
A4A1J11
21 RF DR 1 (+)
RF DR 2 (-)
RF DR 1 (-)
87 RF DR 2 (+)
3 RF DR 1 (+)4 RF DR 2 (+)
A4A1J121 RF DR 1 (+)
PDM CABLE
A23A1J1PDM CABLE
PDM CABLEA32A1J1
PDM CABLE (SAME AS W11)
PDM CABLE (SAME AS W11)
DUMP (+)
PDM 3 (-)PDM 2 (-)
PDM 1 (-)PDM 2 (+)
RF DR 1 (-)RF DR 2 (+)
RF DR 2 (+)
RF DR 1 (-)RF DR 1 (+)
RF DR 2 (-)
RF DR 2 (-)RF DR 1 (-)
RF DR 1 (-)RF DR 1 (+)
RF POWER
ASSYTRANSFORMER
A3A1INTERFACE PWB
A3A1J6
POWER BLOCK
A3A3T2A53A1J1
A43A1J1
A3A2T2
A3A2T1
STAGE B+ (5)
B+ (6)
5
4
3
PWBINTERFACE
A15(PART 4 OF 6)
A7A8
A4A5
J2PWB A1
A2
A16 B7B8
B3B4
J1B1
D
B
A
H
F
PDMDISTRIBUTION
E7E6(PART 3 OF 5)
E2E3
H6H7
PWB H3H4
DISTRIBUTION
A16 J3(PART 5 OF 10)
B5B6
B2B3
J2
A6A1E1
A34A24
RF POWER
ASSYTRANSFORMER
A6A1INTERFACE PWB
(N/U)18
GND
GNDGND
1615
+48V+48V RETURN
191
+15V RETURN+15V RETURN
2425
+15V RETURN
+15V RETURN+15V RETURN
1312
+15V+15V
2021
+15V+15V
89
FAN TACH (F)
MODULE BUS (+)MODULE BUS (-)5
3
(TOP ROW)
RF DR 2 (+)RF DR 2 (-)
78
RF DR 2 (+)RF DR 2 (-)
45
W45P2
RF DR 1 (-)RF DR 1 (+)
A6A1J11
21
RF DR 2 (-)
RF DR 1 (-)RF DR 2 (+)
87
RF DR 1 (+)RF DR 2 (+)
34
W49P2RF DR 1 (+)
A6A1J121
PDM CABLE
W21P1PDM CABLE
A25A1J1
PDM CABLEW18P1 A34A1J1
PDM CABLE (SAME AS W19)
PDM CABLE (SAME AS W19)
DUMP (+)
PDM 3 (-)PDM 2 (-)
PDM 1 (-)PDM 2 (+)
RF DR 1 (-)RF DR 2 (+)
RF DR 2 (+)
RF DR 1 (-)RF DR 1 (+)
RF DR 2 (-)
RF DR 2 (-)RF DR 1 (-)
RF DR 1 (-)RF DR 1 (+)
A54A44
RF POWER
TRANSFORMERASSY
A5A1INTERFACE PWB
A5A1J6
POWER BLOCK
A5A3T2A55A1J1
A45A1J1
A5A2T2
A5A2T1
5
4
3
P7
J9
PWBINTERFACE
A15(PART 5 OF 6)
PWB
A16
J3
J3
J2
J3
J3
PDMDISTRIBUTION
(PART 4 OF 5)
PWBDISTRIBUTION
A16(PART 7 OF 10)
A8A1E1
A36A26
RF POWER
TRANSFORMERASSY
A8A1INTERFACE PWB
(N/U)18
1516
+48V+48V RETURN
191
+15V RETURN+15V RETURN
2425
+15V RETURN
+15V RETURN+15V RETURN12
13
+15V+15V
2021
+15V+15V
89
FAN TACH (F)
MODULE BUS (+)MODULE BUS (-)5
3
(TOP ROW)
RF DR 2 (+)RF DR 2 (-)
78
RF DR 2 (+)RF DR 2 (-)
45
W43P2
RF DR 1 (-)RF DR 1 (+)1
2
RF DR 2 (-)
RF DR 1 (-)RF DR 2 (+)7
8
RF DR 1 (+)RF DR 2 (+)
34
W47P2RF DR 1 (+)1
PDM CABLE
W29P1PDM CABLE
A27A1J1
W26P1PDM CABLE
A36A1J1
PDM CABLE (SAME AS W27)
PDM CABLE (SAME AS W27)
DUMP (+)
PDM 3 (-)PDM 2 (-)
PDM 1 (-)PDM 2 (+)
RF DR 1 (-)RF DR 2 (+)
RF DR 2 (+)
RF DR 1 (-)RF DR 1 (+)
RF DR 2 (-)
RF DR 2 (-)RF DR 1 (-)
RF DR 1 (-)RF DR 1 (+)
A56A46
A57A47
RF POWER
TRANSFORMER
INTERFACE PWB
A7A1J6
POWER BLOCK
A57A1J1
A47A1J1
5
4
3
P7
J9
INTERFACE
(PART 6 OF 6)
PWB
A16
J5
J5
J4
J5
J5
DISTRIBUTION
(PART 5 OF 5)
DISTRIBUTIONPWB
(PART 9 OF 10)
A16
A10A1E1
A38A28
A39A29
RF POWER
TRANSFORMER
INTERFACE PWB
18
1516
+48V RETURN191
+15V RETURN+15V RETURN
2425
+15V RETURN
+15V RETURN+15V RETURN12
13
2021
89
FAN TACH (F)
MODULE BUS (+)MODULE BUS (-)5
3
(TOP ROW)
RF DR 2 (+)RF DR 2 (-)
78
RF DR 2 (+)RF DR 2 (-)
45
W46P2
RF DR 1 (-)RF DR 1 (+)
A10A1J1112
RF DR 2 (-)
RF DR 1 (-)RF DR 2 (+)7
8
RF DR 1 (+)RF DR 2 (+)
34
W48P2RF DR 1 (+)
A10A1J121
PDM CABLE
W37P1PDM CABLE
A29A1J1
PDM CABLEW34P1 A38A1J1
PDM CABLE (SAME AS W35)
PDM CABLE (SAME AS W35)
DUMP (+)
PDM 3 (-)PDM 2 (-)
PDM 1 (-)PDM 2 (+)
RF DR 1 (-)RF DR 2 (+)
RF DR 2 (+)
RF DR 1 (-)RF DR 1 (+)
RF DR 2 (-)
RF DR 2 (-)RF DR 1 (-)
RF DR 1 (-)RF DR 1 (+)
A58A48
A59A49
RF POWER
TRANSFORMER
INTERFACE PWB
POWER BLOCK
A9A3T2A59A1J1
A49A1J1
A9A2T2
A9A2T1
FROM
1
5
GND6
PDM 2 (-) 6
PDM 1 (-) 23
67
3
FROM
6
24
2
1
17
RACK
214
7
23
2211
4 8
10
4
W69P16
H6
H3
F5F6
RF DRIVE
F2
W6P2
C
W8P2
PDM
W1P2
G
E8
E4E5
E1
D8
D5
RF DRIVE D1D2
B7B8
B4
B1
MODULES
A2A1E2
(N/U)
POWER MODULE
17
+48V
+15V
+48V RETURN
+15V RETURN
214
7
23
2211
A2A1J6
+15V
FAN TACH (R)
A2A1J5
10
4
6
10KW POWER BLOCK
RF DR 1 (-)
RF DR 1 (+)
RF DR 2 (-)
RF DR 1 (-)
A31A1J1
PDM CABLE
W8P1
A20A1J1
PDM CABLE (SAME AS W3)
DUMP (-)
PDM 3 (-)
PDM 1 (+)
RF DR 2 (-)
RF DR 2 (-)
RF DR 1 (+)
RF DR 2 (+)
RF DR 2 (+)
RF DR 1 (+)
A1A1E1
MODULES
A1A2
POWER MODULE
10KW
(BOTTOM ROW)
A1A3T1A50A1J1
A40A1J1
A1A1J11
A1A1J12
FROM
6
J1
2
1
RACK
G6
G3
D5D6
DISTRIBUTION
(PART 4 OF 10)
RF DRIVE
D2
W14P2
C
PWB
A17
W9P2
G
E8
E5E4
E1
F8
F5
F1F2
D7D8
D4
D1
RF DRIVE
MODULES
A4A1E2
(N/U)
POWER MODULE
17
+48V
+15V
+48V RETURN
+15V RETURN
214
7
23
2211
+15V
FAN TACH (R)
A4A1J5
10
4
6A4A1J6
10KW POWER BLOCK
6 RF DR 1 (-)
3 RF DR 1 (+)
56
RF DR 2 (-)
2 RF DR 1 (-)
A33A1J1
PDM CABLE
W9P1 A22A1J1
PDM CABLE (SAME AS W11)
DUMP (-)
PDM 3 (-)
PDM 1 (+)
RF DR 2 (-)
RF DR 2 (-)
RF DR 1 (+)
RF DR 2 (+)
RF DR 2 (+)
RF DR 1 (+)
MODULES
A3A1E1
A3A2
POWER MODULE
10KW
(BOTTOM ROW)
A3A3T1A52A1J1
A42A1J1
A3A1J11
A3A1J12
P3
6
J1
25
2
1
RACK
A6
A3
B5B6
DISTRIBUTION
(PART 6 OF 10)
RF DRIVE
B2
C
PWB
A17
G
E8
E5E4
E1
H8
H5
H1H2
B7B8
B4
B1
RF DRIVE
MODULES
A6A1E2
(N/U)
A6A2
POWER MODULE
17
+48V
+15V
+48V RETURN
+15V RETURN
214
7
23
2211
+15V
FAN TACH (R)
10
4
A6A1J66
RF DR 1 (-)
RF DR 1 (+)
RF DR 2 (-)
6
3
56
W22P1
RF DR 1 (-)
PDM CABLE
2
A35A1J1
W17P1 A24A1J1
PDM CABLE (SAME AS W19)
DUMP (-)
PDM 3 (-)
PDM 1 (+)
RF DR 2 (-)
RF DR 2 (-)
RF DR 1 (+)
RF DR 2 (+)
RF DR 2 (+)
RF DR 1 (+)
MODULES
A5A1E1
A5A3A5A2
POWER MODULE
10KW
(BOTTOM ROW)
A5A3T1A54A1J1
A44A1J1
A5A1J11
A5A1J12
P4
6
J1
24
2
1
RACK
DISTRIBUTION
(PART 8 OF 10)
RF DRIVE
J2
J2PWB
A17
RF DRIVE
MODULES
A8A1E2
A8A3A8A2
POWER MODULE
(N/U)17
+48V RETURN
+48V
+15V RETURN
+15V
142
7
23
1122
+15V
FAN TACH (R)
10
4
6A8A1J6
RF DR 1 (-)
RF DR 1 (+)
RF DR 2 (-)
6
3
65
W30P1
RF DR 1 (-)
PDM CABLE
2
A37A1J1
W25P1 A26A1J1
PDM CABLE (SAME AS W27)
DUMP (-)
PDM 3 (-)
PDM 1 (+)
RF DR 2 (-)
RF DR 2 (-)
RF DR 1 (+)
RF DR 2 (+)
RF DR 2 (+)
RF DR 1 (+)
MODULES
A7A1E1
A7A2 A7A3
POWER MODULE
(BOTTOM ROW)
A56A1J1
A46A1J1
A7A1J11
A7A1J12
P5
6
23
2
1
PWB
RACKA15
DISTRIBUTION
(PART 10 OF 10)
RF DRIVE
J4
J4
RF DRIVE
MODULES
A10A1E2
A10A2
FAN
A10A3
POWER MODULE
17
+48V RETURN
+15V RETURN
142
7
23
1122
W70P2
FAN TACH (R)
A10A1J6
10
4
6
RF DR 1 (-)
RF DR 1 (+)
RF DR 2 (-)
6
3
65
W38P1
RF DR 1 (-)
PDM CABLE
2
A39A1J1
W33P1 A28A1J1
PDM CABLE (SAME AS W35)
DUMP (-)
PDM 3 (-)
PDM 1 (+)
RF DR 2 (-)
RF DR 2 (-)
RF DR 1 (+)
RF DR 2 (+)
RF DR 2 (+)
RF DR 1 (+)
MODULES
A9A1E1
A9A2 A9A3
POWER MODULE
(BOTTOM ROW)
A9A3T1A58A1J1
A48A1J1
A9A1J11
A9A1J12
FAN
TACH
(FRO
NT)
A1A1E2 A3A1E2
FAN
TACH
(FRO
NT)
A5A1E2
FAN
TACH
(FRO
NT)
A7A1E2
FAN
TACH
(FRO
NT)
A9A1E2B+ RETURN (1)S2070040 VA
AC-DC POWER
18
1615
191
24INTERFACE25
(PART 2 OF 6)
1312
2021
89
35
78
45
W56P2
21
87
3 A2A4T24
W51P21
PDM IN CTRL W5P1A2A2T2
W2P1A2A2T1
76
23
67
43
W58P2RF DR 2 (+)RF DR 2 (-)
(N/U) 5(N/U) 6
RF DR 1 (+) 2RF DR 1 (-) 3
W57P2
B+ RETURN (3)
AC-DC POWER AC-DC POWER
18
1615
191
2425
1312
2021
89
53
W44P2
W50P2
W13P1
W10P1
W15P2 W15P1
W12P2 W12P1
76
23
W11P2 W11P1
67
43
W59P1 W59P2
56
23
W54P1 W54P2
B+ RETURN (5) B+ RETURN (7)
B+ (7)AC-DC POWER
B+ (8)
A63
18
1615
191
2425
1312
2021
89
53
E7E8
E4E5
W45P1 W43P1E1E2
E7E8
A6A3T2 E3E4
W49P1 W47P1E1
D
W21P2A6A2T2
W29P2B
W18P2B
A6A2T1W26P2
H
W23P2 W23P1 W31P2F
W20P2 W20P1 W28P2
76 F6
F7
2 F23 F3
W19P2 W19P1 W27P2
6 A67 A7
43 A3
A4
W60P1 W60P2 W41P1
5 F56 F6
2 F23 F3
W53P1 W53P2 W55P1
B+ RETURN (9)
AC-DC POWERB+ (9)
B+ (10)
A64
18 18 18
1516
1516
1516
19 19 191 1 1
24 24 2425 25 25
1213 13
12 1213
20 20 2021 21 21
8 8 89 9 9
53
53
53
C7C8
C4C5
W46P1C1C2
G7G8
A8A3T2 G3 A10A3T2G4
W48P1G1
D
A8A2T2W37P2
A10A2T2B
BA8A2T1
W34P2A10A2T1
H
W31P1 W39P2F
W28P1 W36P2
67 F7
F6 67
2 F2 23 F3 3
W27P1 W35P2
6 C6 67 C7 7
34
C3C4
34
W41P2 W42P1
5 H5 56 H6 6
2 H2 23 H3 3
W55P2 W52P1
B+ RETURN (2)
-
+
B2
17
-
+
B1
214
7
23
2211
PDM IN CTRL
W69P2
10
4
6
6
3
56
DISTRIBUTION
(PART 2 OF 10)
2
W6P1
A2A3T1
(PART 1 OF 5)
W1P1
8
DISTRIBUTION
45
1
8
5
(N/U)
(N/U)
12
78
4
1
DISTRIBUTION
(PART 1 OF 10)
B+ RETURN (4)
-
+
B2
17
-
+
B1
214
7
23
2211
10
4
6
W14P1
W16P2 W16P1
8
45
1
8
5
12
78
4
1
B+ RETURN (6) B+ RETURN (8)
-
+
B2
-
+
B2
17
-
+
B1
-
+
B1
214
7
23
2211
A6A1J5
10
4
6
10KW POWER BLOCK
E6
E3
E5E6
W22P2
A6A3T1
E2
W30P2
D
W17P2
W24P2 W24P1
8
W25P2
W32P2
H
F8
45
1
8
5
F4F5
F1
A8
A5
12
78
4
1
A2A1
F7F8
F4
F1
B+ RETURN (10)
-
+
B2
17 17 17
-
+
B1
142
7
23
1122
214
7
23
2211
142
7
23
1122
10
4
A8A1J56
10
4
W70P16
10
4
A10A1J56
10KW POWER BLOCK
C6
C3
G5G6
A8A3T1
G2
W38P2
D
A10A3T1
W32P1
8
W33P2
W40P2
H
F8 8
54
1
8
5
F5F4
F1
C8
C5
54
1
8
5
21
87
4
1
C1C2
H7H8
H4
H1
21
87
4
1
10KW POWER BLOCK
NOTE: SEE FIGURE SD-6 FOR 10 kW RF POWER BLOCK DETAIL
Issue 3.3 2017-03-31 SD-5
Figure SD-5: RF Power Stage, RF Output Filter (Sheet 2 of 2)
T1
L7* * * * * * * * * *
*
L8
* *
L10
* *
L9
*
*
*
4 3 2 1
PWB
E1 A69 KEYC15 C20
C26C33
C31
2
1 2 3
2W
R5100
4
2W
R6220
562R14
5
0.5W
R7330
6 7 8
3
C32
4
13
S1:4
J1
+15VEXCITER
STAGE
PART OF A1
PART OF A5
PART OF A9
PART OF A8
PART OF A4
PART OF A2
S2070240 V1
A67
FOR CAPACITOR VALUES)
* *
VOLTAGE
ARRESTORSURGE
CAPACITOR BANK 2
6
J3P27
*
CAPACITOR BANK 3
L2
1.0C22
0.1C21
DIRECTIONAL
COUPLER
A68A1
J3
SAMPLE
P27
FORWARD POWERSAMPLE
SPARKGAPSTATIC
TO
(OPTIONAL)SWITCH
CONTROLLED
FROM -15V
PART OF A3
PART OF A7
PART OF A10
PART OF A6
RF CURRENT PROBE
C13 C18C16 C17 C23C21 C22
PROBE
A66
50pFC1
8500V
U8
C28C27 C29
2
1.0C25
0.1C24
10C26
35V
L1
1
T1
2W
R347
2W
R447
R1472W
0.1C13
0.1C17
C140.1
0.5W
R11470
2
1
7U1:A
R131500
0.5W
R16470
2
1
7U2:A
A68
COUPLER
0.5W
R8680
0.1C15
0.1C19
C160.1
2W
R1547
2W
R2047
C200.1
9100pFC1
9100pFC2
0.5W
R102200
DIRECTIONAL
J1
J2
9100pFC4
9100pFC5
REFLECTED POWER
DRAIN STN GNDGROUND
C10.047
C29100pF
10C23
35V
1
16
S1:1
2
15
S1:2R2472W
R181500
6
11
S1:6
5
12
S1:5
C180.1
8
9
S1:8
P23T1J1
(SAME AS ABOVE)
RF TRANSFORMER
(SAME AS ABOVE)
RF TRANSFORMER
(SAME AS ABOVE)
RF TRANSFORMER
(SAME AS ABOVE)
RF TRANSFORMER
(SAME AS ABOVE)
RF TRANSFORMER
(SAME AS ABOVE)
RF TRANSFORMER
(SAME AS ABOVE)
RF TRANSFORMER
(SAME AS ABOVE)
RF TRANSFORMER
(SAME AS ABOVE)
RF TRANSFORMER
RF TRANSFORMERS ARE PART OF BACKPLANE ASSEMBLIES A1
(REFER TO CUSTOMER CONFIGURATION SHEET* DENOTES FREQUENCY DEPENDENT COMPONENTS
CAPACITOR BANK 1
RF TRANSFORMER
J1 P24RF VOLTAGE SAMPLE
87
5
4
C150pF
STAGE
TO SHEET ?
RF OUT
THROUGH A5 AND ARE SHOWN HERE FOR REFERENCE ONLY.
C24C19C14
(SAME AS ABOVE)
0.5W470R12
0.5W470R17
C25 C30
RF CURRENT SAMPLE
1
9100pFC3
0.5W
R91000
EXCITER
TO ANTENNA
3
14
S1:3
7
10
S1:7
REFLECTED POWER SAMPLE
FORWARD POWER SAMPLE
4 V+
5COMP
6V-
3SHUTDOWN
LT1210CT7U2:B
4 V+
5COMP
6V-
3SHUTDOWN
LT1210CT7U1:B
Issue 3.3 2017-03-31 SD-6
Figure SD-6: 10 kW RF Power Block
+48V
B+
F1
F2
B+
B+
J1
J2
RFA?
A?
J1
J2
+48V
+48V
K1
K2
(CLOSE)(OPEN)
U1
(CLOSE)(OPEN)
U1
J11
J12
B+
F3
F4
+15V
+15V
J3
J4
A1J1
PWB
A?A1
12
7
53
J5 *
+48V
e
e
ASSY
RF
+15V
J7
J8
a
a
b
b
T1
T2
B+
A1J1
A1P1
A1P1
J9
E9
E7
E8
4
6
P1
a
P1
a
S2070097 V1
1516
12
+48VJ6
7
RF DRIVE 2 (-) 5
RF DRIVE 1 (-) 2
J111
B+ RETURN
B+E1
2425
1211
2122
+15V 98
5
J66
4
RF DRIVE 1 (-) 2
J12
+15V RETURN
+15V
FAN TACH (REAR)
FAN TACH (FRONT)
MODULE BUS (+)
(PART 1 OF 4)PWB
POWER
+15V RETURN
+15V
FAN TACH (REAR)
MODULE BUS (-)
MODULE BUS (+)
8
56
3
1
A1P1
(2 OF 4)MODULE
A1P1
MODULEPOWER
7
A1J154
2
PWBINTERFACE
A?A1
1N4004CR4
J5 *
21
e
ASSY
A?A2
21
e
+15V
8
6
3
B+ RETURN
7
6
DUMP (-)
PDM 2 (-)PDM 3 (-)
PDM 2 (+)
PDM 1 (+)
B+
+15V RETURN
FAN TACH (REAR)
FAN TACH (FRONT)
MODULE BUS (+)
B+
PWB
POWER
+15V RETURN
FAN TACH (FRONT)
MODULE BUS (-)
MODULE BUS (+)
DUMP (+)
PDM 3 (-)PDM 3 (+)
PDM 1 (-)
5
8
4443
41
3938
36
A1P1 3433
31
64
62
60(4 OF 4)59MODULE
RFA? 57
5554
52
J3
5
8
44
4241
39
3736
A1P1 34
3231
6362
60
58MODULE57POWER
A? 55
5352
J4
+48V
INTERFACE
+48V
1N4004CR8
1615
+48VFAN TACH (REAR)
MODULE BUS (-)
(CLOSE)(OPEN)
K2
21
U1
A?A3
(CLOSE)(OPEN)
K1
21
U1
B+ RETURN
B+
14
19
4
E2
1020
1323
RF DRIVE 2 (-)
4
3
5
1
20A
470450V
C1 100K2W
R1
MODULE BUS (-)
DS2G
100K2W
R2
470450V
C2
MODULE
A?A1
INTERFACE
FAN TACH (FRONT)
A1J1
7
4
2
A1P1
POWER
A1P1
(1 OF 4)
6
8
3
1
1N4004CR2
1N4004CR1
E3
E4
(PART 2 OF 4)
POWERMODULE
1N4004CR3
E5
E6
+15V RETURN
89
P1 +
-+
-
TRANSFORMER
+
-
P1
+15V RETURN
B+ RETURN
7
8
3
DUMP (+)
PDM 3 (+)
PDM 1 (-)
470450V
C3 100K2W
R3
MODULE BUS (-)
DS4G
100K2W
R4
470450V
C4
MODULE
A?A1
FAN TACH (REAR)
DUMP (-)
PDM 2 (-)
PDM 2 (+)
PDM 1 (+)
6
7
42
40
37
35
32
63
61
58POWER
56
53
51
6
7
43
40
38
35
33
64
61
59(3 OF 4)
RF 56
54
51
1N4004CR6
1N4004CR5
E10
(PART 4 OF 4)
POWERMODULE
1N4004CR7
J10
14
19
MODULE BUS (+)
+
-+
-
b T2
TRANSFORMER
+
-
b T1
DS1G
20A
+
-
DS3G
+
-
DUMP (-)
PDM 2 (-)PDM 3 (-)
PDM 2 (+)
PDM 1 (+)
7977
7372
7069
8786
8280
4
+48V RETURN1615
1712
109
2524
2221
RF DRIVE 1 (+) 19
81
7775
7271
88
8584
+15V RETURN8078
21
3
FAN TACH (FRONT)18
1211MODULE BUS (-)
9MODULE BUS (+)26
RF DRIVE 2 (+)2423
2120
DUMP (+)
PDM 3 (-)PDM 3 (+)
PDM 1 (-)
5 1
8
2
4443
41
3938
36
3433
31
64
62
6059
57
55 RF DRIVE 2 (-)54
52RF DRIVE 1 (-)
RF DRIVE 1 (+)
5 1
8
44
4241
39
3736
34
3231
6362 RF DRIVE 2 (+)
RF DRIVE 1 (-)6025
5857 13
23
5522
5352 PWB IS USED ONLY ON NAPI95/01 VARIATIONS.
1020
8
165
3
21
7977
7372
7069
8786
8280
4
1615
1712
109
2524
2221
19
81
77 175
7271
88
(PART 3 OF 4)8584
8078
21
3
18
1211
926
2423
2120
FAN TACH (REAR)7
FAN TACH (FRONT) FAN TACH (FRONT)MODULE BUS (-)4
5
2
DUMP (+)
PDM 3 (+)
PDM 1 (-)
81
75
71
88
8485
78
12
3
18
RF DRIVE 2 (+)
11
26
23
20
B+ RETURN 79
73
6970
8687
82
4C5100050V
1516
FAN TACH (REAR)
17
10
25
RF DRIVE 1 (+)
22
19
DUMP (-)
PDM 2 (-)
PDM 2 (+)
PDM 1 (+)
6
7 3
42
40
37
35
32
63
61
58
56
53 RF DRIVE 2 (+)
51
6
7 3
2
43
40
38
35
33
RF DRIVE 2 (-)64
61
RF DRIVE 1 (+)59
56
54
1112
24
21
51 * CONNECTOR J5 OF THE POWER MODULE INTERFACE
3
81
4
2
7
75
71
88
8485
20A
78
12
3
18
11
26
23
20
79
73
69 370
INTERFACE
8687 2
82
4
1516
17
10
25
22
19
6
8
MODULE BUS (+)3
1
20A
Issue 3.3 2017-03-31 SD-7
Figure SD-7: NAPC160B/01 Control/Interface PWB (Sheet 1 of 7)
R17010.0K
CPU PDM
MISO
SCK
A0
A2
A4
A6
3V
2
1N/C
5
7VE
A0
A2
A4A5
A7
A9A10
A12
A14
10C9
2
20CE
22OE
21A0
24A2
1A5
3A7
6A10
8A12
3DE
1RO
2V+
5C2-
3C1-
2V+
3C1-
2
+5V
2
2
+5V +5V
+5V
+5V
+5V
CR55
+5V +5V
+5V +5V
+5V
+5V +5V
+5V
+5V
+5V
RTC
+5V
R165
22.1
TP47
MOSI
A1
A7
A5
A3
+5V
1000R13
+5V
2
4N/C
3
6
A1
A3
A6
A8
A11
A13
2
C20.1
C560.1
28VCC
26A4
27WE
25A3
23A1
10A14
9A13
4A8
5A9
7A11
2A6
2RE
4DI
5C2-
2
0.1C133
0.1C137
0.1C151
475R217
SHEET 7FROM
FROM SHEET 3
PROG GND 2 J25
PROG TDOPROG TMS 5 J25
8 J25
PROG VCC 4 J25
# GPS OK - B8 J22
FROM SHEET 4
+5V
ALARM
S4
PWR
S3
PWR
REMOTE
FROM SHEET 3
FROM SHEET 2
10.0KR74
10.0KR158
10.0KR161
10.0KR173
42 PL7
18pFC155
R172100
C1780.1
62GND
11GND
+5V 100AVCC
80VCC
0.1C142
0.1C152 31
VCC
28PG3/TOSC2
1PG5/OC0B
82PK7/ADC15/PCINT23
50PD7/T0
83PK6/ADC14/PCINT22
40PL5/OC5C
38PL3/OC5A
4PE2/AIN0/XCK0
79PJ7
49PD6/T1
19PB0/PCINT0/SS
46PD3/INT3/TXD1
45PD2/INT2/RXD1
13PH1/TXD2
64PJ1/TXD3/PCINT10
3PE1/TXD0
22PB3/PCINT3/MISO
20PB1/PCINT1/SCK
30RESET
8PE6/INT6/T3
44PD1/INT1/SDA
55PC2/A10
54PC1/A9
57PC4/A12
59PC6/A14
51PG0/WR
78PA0/AD0
75PA3/AD3
76PA2/AD2
73PA5/AD5
9PE7/INT7/ICP3/CLKO
71PA7/AD7
18PH6/OC2B
16PH4/OC4B
15PH3/OC4A
LOCAL
A9
A12
A14
#WR-
RF ONREMOTE
5SDA
0.1C164
ISL12022IBU57
3VBAT
MINORINHIBIT ALARM
SBC
D0
D0D2
D2D5
D4D7
D6
16J19
11
#SELECT_SYNC_INT-
#CS_RMT_OUT-
#CS_DAC2-
#LEDS_LOAD+
#SELECT_SIDE_B-
SCK3J26
+5V 2J26
+5V
4 J21 0.1C143
6
8VCC
3
4N/C 6N137-300
U6
0.1C30
10VBAT
8SENSE
2VDD
0.1C192
0.01C193
2
+5V-B
+5V-BR10
681
0.1C6
0.1C10
0.1C8
+5V
0.1C67
0.1C57
5GND
6DO/RI
10T2IN
9R2OUT
13R1IN
0.1C69
8R2IN
9R2OUT
ADM3202ARNU25 13
R1IN
RAM
D011I/O0
D2D315
I/O3
D517I/O5
D7
(+)B5J22
(+)12J1
(+)1J21
(+)2J19
(+)2J17
CTS8J13
RXD3J13
DSR
DTR4J13
A5J3
CTS
RTS
A8J3
RXDA3J3
DSR
DTR
DCD
A4J3
INTERNAL
INTERNAL
INTERNAL
INTERNALBUS
INTERNALBUS
EXTERNALSERIAL BUS
PROG RESET 6 J25
PROG GND
PROG TDI
PROG TCK
FROM SHEET 2
10 J25
9 J25
1 J25
3 J25
PROG VCC
FROM SHEET 7
7 J25
RESET
S6 CR5624V
CR5424V
DECR
INCR
CR5224V
CR5024V
LOCAL/
RF OFF
S1 CR4824V
CR33 CR35 CR38
+5V +5V
10.0KR171
1
4
85
t°EN
U51TMP36FS
CR49 CR51 CR53
R2501000
R2181000
+5V
R2061000
10.0KR207
10.0KR216
10.0KR219
R139100K
R157100K
CR36
60PC7/A15
Y111.0592MHz
34XTAL1
33 XTAL2
C1970.1
C2040.1
CR57
C1820.1
C1870.1
+5V+5V
10.0KR210
10.0KR251
99GND
81GND
32GND
0.1C144
98AREF
61VCC
10VCC
29PG4/TOSC1
48PD5/XCK1
37PL2/T5
39PL4/OC5B
5PE3/AIN1/OC3A
12PH0/RXD2
47PD4/ICP1
21PB2/PCINT2/MOSI
2PE0/PCINT8/RXD0
+5V
43PD0/INT0/SCL
53PC0/A8
56PC3/A11
58PC5/A13
41PL6
52PG1/RD
70PG2/ALE
74PA4/AD4
77PA1/AD1
27PH7/T4
17PH5/OC4C
14PH2/XCK2
72PA6/AD6
+5V
R1371000
TP18
+5V
10.0KR81
10.0KR82
10.0KR186
+5V +5V +5V
BT13V
10.0KR190
10.0KR192
10.0KR196
A10
A8
A11
A13
#RD-
+5V+5V
DS3ADS2A
LS1MSR516N
+5V+5V +5V+5V
10.0KR185
10.0KR221
10.0KR252
6SCL
8VDD
+5V
DS6ADS5A
RESET S7
4 13
U47:D
10.0KR107
10.0KR162
10.0KR265
10.0KR266
Y232.768kHz
D1D4
D1
D3
10.0KR201
D7
D5
D3D6
12
R145
12.10.1C134
16J17
#SELECT_SYNC_B-
#CS_SERIAL_FLASH-
#CS_DAC1-
#PDM_LATCH_RESET-#SELECT_STREAMING_B-
#CS_RMT_IN-
#CS_POT-
TX_(COMB_CONT)
4J26
1J26
6J26
5J26
0.1C162
2 J21
+5V
CR47
10.0KR205
TP20
10.0KR146
R5121K
R8121K
+5V
0.1C29 7
VE
5
6N137-300U7
R12
6812
1 N/C
0.1C176
0.1C171
5CEIN
4MR
+5V
2
+5V-B
+5V-B
0.1C7
1000R9
0.1C55
RAM MONITOR
0.1C172
7DO/RI
DS36C278TMU64
0.1C5
7T2OUT
6V-
8R2IN
15GND
R149.9
R249.9
14T1OUT
ADM3202ARNU1
7T2OUT
6V-
15GND
10T2IN
R6149.9
14T1OUT
14GND
D4
D1
D619
I/O718
I/O6
16I/O4
13I/O2
12I/O1
(-)
(-)
(-)
(-)
B9J22
3J21
15J19
24J1
(-)
5J13
15J17
TXD
RTS7J13
6J13
2J13
DCD1J13
A7J3
TXD
A6J3
A1J3
A2J3
3J19
3J17
BUS
BUS
BUS
(GPS)
(RACK MASTER)
(EXGINE/DRM)
(EXCITER B)
(EXCITER A)
(RS-232)
S2 R2151000
R2341000
0.1C160
0.1C163
ATmega2560-16AUU53
475R209
475R214
475R222
475R233
76
5
1
0
U35:2
R4121K
R7121K
0.1C1CR3
1SMB5919BT35.6V
R6249.9
S2070310 SHEET 1 OF 7 V1
6PE4/INT4/OC3B
#EXT_PDM_INHIBIT-#INTLK_OPEN_(COMB)-
24PB5/PCINT5/OC1A
#PDM_LATCH- 36PL1/ICP5
10.0KR125
10.0KR151
92PF5/ADC5/TMS
87PK2/ADC10/PCINT18
+5V 85PK4/ADC12/PCINT20
ADC_REF 88PK1/ADC9/PCINT17
18pFC153
96PF1/ADC1
7PE5/INT5/OC3C
35PL0/ICP4
84PK5/ADC13/PCINT21
65PJ2/XCK3/PCINT11
69PJ6/PCINT15
68PJ5/PCINT14
67PJ4/PCINT13
MODULATION_SAMPLE 95PF2/ADC2
RF_DRIVE_SAMPLE 97PF0/ADC0
+5V
SBC RESET+15V
TO SHEET 7TO SHEET 7
TO SHEET 6TO SHEET 5
TO SHEET 4TO SHEET 4
TO SHEET 4TO SHEET 3
TO SHEET 2TO SHEETS 2 & 3
TO SHEET 7
FROM SHEET 5
TO SHEETS 2, 4, 5 & 6
TO SHEETS 2, 4, 5 & 6
MISO
PROG_GND
PROG_VCC
1X1
2X2
RF OFF ALARMMAJOR
681R236
1.0C31
1C1+
11T1IN
9RESET
CR1324V
3GND
TPS3613-01DGSU61
+5V 6CEOUT
DEBUG
# ADDRESS -(EXCITER A)
#INTERLOCK_OPEN-
CR37
25PB6/PCINT6/OC1B
23PB4/PCINT4/OC2A
#FAST_SHUTBACK- 26PB7/PCINT7/OC1C/OC0A
93PF4/ADC4/TCK
91PF6/ADC6/TDO
90PF7/ADC7/TDI
10.0KR163
RX_(COMB_CONT) 63PJ0/RXD3/PCINT9
86PK3/ADC11/PCINT19
C1560.01 3
2
1U52:A
94PF3/ADC3
89PK0/ADC8/PCINT16
10.0KR188
#CS_SRAM-
#CS_ADDR-10.0KR235
66PJ3/PCINT12
+5V
DS1A
Q1MMBT4401LT1
CR8024V
100R361
TO SHEET 5
TO SHEET 2
10.0KR123
10.0KR124
PROG_MOSI
R164
22.1
R166
22.1
PROG_RESET
+5V
0.1C167
7IRQ/FOUT
4GND
3D1
18Q1U56:B
2D0
19Q0U56:A
7D5
14Q5U56:F
8D6
13Q6U56:G
6D4
15Q4U56:E
9D7
12Q7U56:H
DS7RDS4A
+5V
221R237
681R238
221R240
8VCC
4C2+
12R1OUT
16VCC
+5V
1VIN
2GND
7+V
50V
MAU202U8
CR124V
CR224V
11T1IN
8VCC
CR1424V
16VCC
12R1OUT
4750R203
12.1KR204
4C2+
1C1+
7RESET
1VOUT
(RS-232)
(EXCITER B)
# ADDRESS +
475R202
475R241
4D2
17Q2U56:C
5D3
16Q3U56:D
20VCC
10GND
1
11 LATCHENABLE
OUTPUTENABLE
U56:ISN74AHC573DW
4VDD
11GNDU52:E
TLV2374ID
CY62256LLU59
# PDM INHIBIT - (EXCITER B)
# PDM INHIBIT - (EXCITER A)
Issue 3.3 2017-03-31 SD-8
Figure SD-8: NAPC160B/01 Control/Interface PWB (Sheet 2 of 7)
47C32
L6
-5V
T7
CW
-5V
+5V
2IN+
6GND
5LE
8Q
C930.1
(+)
(+)
(+)
(+)
(+)
(+)
(+)
(+)
(+)
(-)
(+)
(-)
(+)
(-)
(+)
(-)
(+)
(-)
(+)
(-)
(+)
(-)
(+)
(-)
(-)
(-)
(-)
(-)
(-)
(-)
(-)
(-)
L3
CW
10
1
-5V
+5V
7
84
3
3IN-
7Q
C680.1
1.0C20
(-)
(-)
(-)
(-)
(-)
(-)
(-)
(-)
(+)
(+)
(+)
(+)
(+)
(+)
(+)
(+)
+5VR71221
C821.0
-15V
+5V
1.0C92
1.0C11
+5V-C
-5V
STREAMING BUS (EXCITER B)
STREAMING BUS (EXCITER A)
DUMP 3 (EXCITER B)
DUMP 3 (EXCITER A)
DUMP 2 (EXCITER A)
DUMP 1 (EXCITER B)
(-)
RF DRIVE
RF DRIVE(EXCITER A)
(+)
BUS (AUI)STREAMING
FROMSHEET 1
# RF DRIVE LATCH (A) -
#SELECT_STREAMING_B-
T5
-5V
SCK
825R6
23A2
1B1
3W1
4750R72
AD5263BRU20U33
R350
1W100
VSWR
R731000
4VCC-
74LVC257APWU24
+3.3V
SN74HC257PWU19
1 SELECT
+5V-D
15OE
+5V-D
R1410.0K
R16100
-5V
-5V
TXD (+)6J2
H7J15
G7J15
F7J15
E7J15
D7J15
C7J15
B7J15
A7J15
H8J14
G8J14
F8J14
E8J14
D8J14
C8J14
B8J14
A8J14
H2J14
G2J14
F2J14
E2J14
D2J14
C2J14
B2J14
A2J14
TO SHEET 1
TO SHEET 1
+5V
+5V-DL1
+5V
1.0C14
1.0C12
1.0C13
0.1C37
+5V-DC351.0
C991.0
0.1C140
1.0C126
0.1C127
10.0KR140
TP19
DUMP 2 (EXCITER B)
DUMP 1 (EXCITER A)
(EXCITER B)
(+)
(-)
# RF DRIVE LATCH (B) -
#SELECT_SIDE_B-
+5V
0.1C86
MOSI
#CS_POT-
VSWR_THRESHOLD
REFLD_PWR_SAMPLE
C1131.0 825
R111
C41.0
1000R11
4750R79
22W2
24B2
4750R77
2A1
T8
THRESHOLD
CR191N5711
1000R69R68
825
CR171N5711
CR181N5711
1.0C80
0.1C79
0.1C81
1VCC+
1 SELECT
1213
14
1
0
1SELECT
43
2
1
0
910
11
1
0
14
6
U49:A
TP52
14
6
U20:A
TP46
ON SHEET 1
74LVC257APWU35
C520.1
+5V-D
4
5
6U18:B
12
13
11U18:D
1.0C19
1.0C105
+3.3V
1.0C112
TXD (-)
H8J15
1J23
2
1
U32:A
D8J15
F8J15
E8J15
G8J15
13
14
15
U4:D
13
14
15
U16:D
13
14
15
U5:D
A8J15
B8J15
C8J15
13
14
15
U14:D
13
14
15
U3:D
13
14
15
U2:D
G7J14
F7J14
E7J14
H7J14
11
10
9
U11:C13
14
15
U11:D
13
14
15
U12:D
D7J14
A7J14
C7J14
B7J14
13
14
15
U10:D11
10
9
U9:C13
14
15
U9:D
H1J14
G1J14
F1J14
E1J14
3
2
1
U11:A
5
6
7
U11:B
3
2
1
U12:A
B1J14
A1J14
D1J14
C1J14
3
2
1
U10:A
3
2
1
U9:A
5
6
7
U9:B
0.1C48
3
1
3
1
C31.0
C1081.0 1000
R92
4750R83
0.1C34
0.1C100
R154750
76
5
1
0
9
10
8U18:C
1
2
3U18:A
C330.1
13
14
15
U17:D
11
10
9
U10:C
11
10
9
U12:C
13
14
15
U15:D
5
6
7
U10:B
5
6
7
U12:B
FROM SHEET 1
0.1C88
14 J19
FROM SHEET 1
1 J16
14 J18
12 J18
0.1C15
12 J16
+5V-D13 J16
3 J2
4 J2
2 J2
+3.3VFROM SHEET 4
1 J17
9DIS
4B3
20A4
5A3
6W3
18VSS
14RES/AD1
12CLK/SCL
-5V
+5VR349
1W100
15OE
16VCC
ONE GATE IS LOCATED
8GND
16VCC
RF DR-2
8GND
#FAST_SHUTBACK-
+5V-C
#FAST_SHUTBACK+
+5V-C
STREAMING
DUMP 2
DUMP 1
DUMP 3
DUMP 2
DUMP 1
DUMP 3
DUMP 2
DUMP 1
RF DRIVE 2 (A)
RF DRIVE 2 (A)
RF DRIVE 2 (A)
RF DRIVE 2 (A)
RF DRIVE 2 (A)
RF DRIVE 2 (A)
RF DRIVE 2 (A)
RF DRIVE 2 (A)
RF DRIVE 1 (A)
RF DRIVE 1 (A)
RF DRIVE 1 (A)
RF DRIVE 1 (A)
RF DRIVE 1 (A)
RF DRIVE 1 (A)
RF DRIVE 1 (A)
RF DRIVE 1 (A)
0.1C18
14 J17
2 J18
1 J18
4ENABLE
16VCC
12ENABLE
8GND
DS26LS31TMU12:E
4ENABLE
16VCC
12ENABLE
8GND
DS26LS31TMU32:E
0.1C16
0.1C17
25 J18
14 J16
2 J16
4ENABLE
16VCC
12ENABLE
8GND
DS26LS31TMU11:E
13 J18
25 J16
4ENABLE
16VCC
12ENABLE
8GND
DS26LS31TMU9:E
1.0C128
8 J2
5 J2
9 J2
7 J2
3GND
2GND5
VCCU49:B
NC7SZ57P6X
+3.3V
FROM SHEET 6
3GND
2GND5
VCC U20:BNC7SZ57P6X
1 J19
S2070310 SHEET 2 OF 7 V1
8
7
3
2
U37:A
8
7
3
2
U13:A
1.0C94
21B4
17NC/O2
8GND
1.0C84
10VLOGIC
15SHDN
16SDO/O1
19W4
7VDD
CW
10KR78
11SDI/SDA
13CS/AD0
CR151N5711
CR161N5711
TL3016IDU31
8GND
1213
14
1
0
910
11
1
0
15OE
16VCC
RF DR-1
RF_DRIVE_SAMPLE
5LE
1VCC+
4VCC-
6GND
TL3016IDU37:B
BUS (AUI)
14VCC
7GND
U18:EMC74ACT08D
4ENABLE
16VCC
12ENABLE
8GND
DS26LS31TMU10:E
4IN
1GND
3OUTMC79M05BDT
U44
R934750
4
6
5
4
6
5
43
2
1
0
5LE
1VCC+
4VCC-
6GND
TL3016IDU13:B
43
2
1
0
76
5
1
0
910
11
1
0
1213
14
1
0
Issue 3.3 2017-03-31 SD-9
Figure SD-9: NAPC160B/01 Control/Interface PWB (Sheet 3 of 7)
L4
1.0C25
C770.1
C660.1
C650.1
C640.1
(+)
(+)
(+)
(+)
(+)
(+)
(+)
(+)
(-)(+)
(-)(+)
(-)(+)
(-)(+)
(-)(+)
(-)(+)
(-)(+)
(-)(+)
(-)
(-)
(-)
(-)
(-)
(-)
(-)
(-)
1.0C46
1.0C27
1.0C45
1.0C44
1.0C23
1.0C43
1.0C21
C760.1
C780.1
C1290.1
C600.1
C610.1
C710.1
C720.1
C730.1
(-)
(-)
(-)
(-)
(-)
(-)
(-)
(-)
(+)
(+)
(+)
(+)
(+)
(+)
(+)
(+)
C590.1
+5V
0.1C26
+5V
+5V
PDM 9 (EXCITER B)
PDM 9 (EXCITER A)
PDM 8 (EXCITER A)
PDM 7 (EXCITER B)
PDM 7 (EXCITER A)
PDM 6 (EXCITER B)
PDM 6 (EXCITER A)
PDM 5 (EXCITER A)
PDM 4 (EXCITER B)
PDM 4 (EXCITER A)
PDM 3 (EXCITER B)
PDM 3 (EXCITER A)
PDM 2 (EXCITER A)
PDM 1 (EXCITER B)
PDM 1 (EXCITER A)
FROM SHEET 1
#SELECT_SIDE_B-
PDM 9-B
PDM 9-A
PDM 8-A
PDM 7-B
PDM 6-B
PDM 6-A
PDM 5-A
PDM 4-B
PDM 3-B
PDM 3-A
PDM 2-A
PDM 1-B
#PDM_LATCH_RESET-
74LVC257APWU23
74LVC257APWU22
C540.1
F4J15
C4J15
PDM 8H4J15
PDM 8E4J15
PDM 8B4J15
PDM 7G4J15
PDM 7D4J15
PDM 7A4J15
PDM 6F6J15F3J15
PDM 6C3J15
C6J15
PDM 5H6J15
PDM 5E6J15
PDM 5B6J15
PDM 4G6J15
PDM 4D6J15
PDM 4A6J15
PDM 3F2J15
PDM 3C2J15
PDM 2H2J15
PDM 2E2J15
PDM 2B2J15
TO SHEET 1
0.1C42
0.1C28
0.1C41
0.1C40
0.1C24
0.1C39
0.1C22
47C38
+5V
3VCC
12GNDU28:E
MC3302D
3VCC
12GNDU29:E
MC3302D
FROM SHEET 1
PDM 8 (EXCITER B)
PDM 5 (EXCITER B)
PDM 2 (EXCITER B)
PDM 8-B
PDM 7-A
PDM 5-B
PDM 4-A
PDM 1-A
PDM 2-B
74LVC257APWU21
+3.3V
CR5
1000R37
+3.3V
CR6
1000R39
+3.3V
CR7
1000R40
+3.3V
CR10
1.00MR65
C580.1
1000R66
CR11
1.00MR59
1000R55
+3.3V
1.00MR58
CR12
1000R60
+3.3V
+3.3V
1.00MR41
10.0KR63
C620.1
+3.3V
10.0KR70
R271000
R321000
TP9
TP2
R331000
R311000
TP10
R261000
TP4
R251000
R291000
TP6
TP5
TP51
11
10
9
U4:C
11
10
9
U17:C
11
10
9
U3:C
11
10
9
U2:C
11
10
9
U15:C
11
10
9
U5:C
5
6
7
U17:B
5
6
7
U3:B
5
6
7
U16:B
5
6
7
U14:B
5
6
7
U15:B
5
6
7
U5:B
3
2
1
U3:A
3
2
1
U16:A
3
2
1
U14:A
3
2
1
U4:A
3
2
1
U5:A
R2410.0
3
2
1
U2:A
PDM 9F5J15
PDM 9
E5J15
B5J15
C5J15
H5J15
A5J15
G5J15
D5J15
H3J15
E3J15
B3J15
G3J15
D3J15
F1J15
A3J15
C1J15
PDM 1
E1J15
G1J15
B1J15
H1J15
G2J15
PDM 1
PDM 1A2J15A1J15
D1J15
D2J153
VCC12
GNDU30:E
MC3302D
+3.3V
1.00MR35
+3.3V
10.0KR64
1.00MR67
C630.1
R281000
TP7
TP3
R301000
TP11
11
10
9
U14:C
5
6
7
U4:B
11
10
9
U16:C
3
2
1
U17:A
5
6
7
U2:B
3
2
1
U15:A
S2070310 SHEET 3 OF 7 V1
+5V
1 SELECT15
OE
15 J18
15 J16
4 J16
18 J18
1 SELECT15OE
3 J18
3 J16
17 J16
6 J18
15OE
1 SELECT
16 J18
16 J16
5 J16
19 J18
#PDM_LATCH-
4ENABLE
16VCC
12ENABLE
8GND
DS26LS31TMU17:E
4ENABLE
16 VCC
12ENABLE
8GNDDS26LS31TM
U5:E
4ENABLE
16 VCC
12ENABLE
8GNDDS26LS31TM
U4:E
4ENABLE
16VCC
12ENABLE
8GND
DS26LS31TMU3:E
4 ENABLE
16VCC
12ENABLE
8GND
DS26LS31TMU2:E
8GND
4 J187
6
5
1
0
U23:2
1213
14
1
0
U23:4
CR4
1000R36
18 J16
16VCC
+3.3V
1.00MR56
17 J18
910
11
1
0
U22:3
1213
14
1
0
U22:4
8GND
CR9
1000R43
6 J164
3
2
1
0
U22:1
16VCC
+3.3V
1.00MR389
10
11
1
0
U21:3
8GND
CR8
1000R42
5 J18
19 J167
6
5
1
0
U21:2
43
2
1
0
U21:1
16VCC
+5V
1.00MR57
14VCC
7GNDU43:E
MM74HC00M
7
6
1U30:B
7
6
1U28:B
5
4
2U30:A
9
8
14U28:C
MODULATION_SAMPLE
10.0KR34
9
8
14U29:C
5
4
2U29:A
64
5U43:B
31
2U43:A
4 ENABLE
16VCC
12ENABLE
8GND
DS26LS31TMU16:E
4ENABLE
16VCC
12ENABLE
8GND
DS26LS31TMU15:E
4ENABLE
16 VCC
12ENABLE
8GNDDS26LS31TM
U14:E
76
5
1
0
U22:2
43
2
1
0
U23:1
910
11
1
0
U23:3
+3.3V
1213
14
1
0
U21:4
5
4
2U28:A
7
6
1U29:B
9
8
14U30:C
Issue 3.3 2017-03-31 SD-10
Figure SD-10: NAPC160B/01 Control/Interface PWB (Sheet 4 of 7)
70%
80%
10%
20%
7J19
6J196J17
8J198J17
9J199J17
CLOCK
FS
(-)
I/Q
L15
SCK
SCK
R24210.0
R31010.0
3
1
3
1
60%
90%
110%
100%
-15V
30%
50%
40%
7J17 DATA
(+)
AUDIO
R24910.0
R24810.0
R31210.0
R31110.0
R30910.0
R24310.0
FROM
(IBOC)SERIAL DATA
(-)(IBOC)
(+)
(-)
SERIAL FRAME(+)
(-)
(+)
(-)
SHIELDAES 1
(+)
(-)
AUDIO
BALANCED
(+)
SCK
+5V
T1
121R174
T2
6QG
7QH
4QE
3QD
2QC
13VCC
5RIN3-
4RIN2-
3RIN2+
1RIN1-
2RIN1+
+5V
+5V
681R182
681R189
11SHIFT_CLK
7QH
6QG
4QE
3QD
2QC
8GND
16VCC
8GND
16VCC
+5V
19J17
+3.3V
20J19
18J19
21J17
22J17
10J19
LVCMOS
ANALOGBALANCED
#CS_DAC2-
MOSI
+5V
0.1C195
1.0C201
0.1C220
1.0C223
+5V
C2110.1
1.0C202
0.1C206
0.1C228
1.0C230
8LOAD
6DATA
13LDAC
14VDD
4REFC
5REFD
3REFB
2REFA
8LOAD
7CLK
TLV5620IDU67
1GND
C2170.01
C1940.01
10.0KR229
C2140.01
10.0KR288
C2290.01
10.0KR291
DIGITAL TO ANALOG
0.1C148
C2180.1
R25910.0
R34610.0
SPARE 2
TO SHEET 6
TO SHEET 1
ANALOG OUT (RMT I/FACE) 4
ANALOG OUT (RMT I/FACE) 2
ANALOG OUT (RMT I/FACE) 1
SHEET 1
(-)
(+)
SERIAL CLOCK
(IBOC)
SHIELDAES 2
SHIELDANALOG
MOSI
#LEDS_LOAD+
14A
0.1C74
100R254
100R256
121R147
681R197
562R198
681R199
562R200
9SQH
R47475
R48475
5QF
R44475
R45475
15QA
1QB
16EN
8RIN4-
6RIN3+
7RIN4+
DS90LV048U68
220pFC165
220pFC166
2210R191
2210R194
+5V
+5V
7
6
5
U48:B
1
2
3
U48:A
+15V
CR411SMB10CAT310V
14A
12LATCH_CLK
9SQH
MC74HC595ADU27
5QF
15QA
10RESET
13OE
1QB
15OE
74LVC257APWU46
CR43
CR44
CR45
R53475
R54475
G
DS18
G
DS17
+5V
R50475
R51475
G
DS15
G
DS14
R18449.9
19J19
20J17
18J17
21J19
22J19
10J17
C2000.1
#CS_DAC1-
MOSI
C1910.1
L14
C1981.0
10.0KR239
+5VL16
7CLK
TLV5620IDU63
5REFD
1GND
3REFB
2REFA
4REFC
6DATA
13LDAC
14VDD
+5V
+5V
C1960.01
10.0KR230
10.0KR231
10.0KR245
10.0KR246
10.0KR262
C2160.01
10.0KR258
10.0KR269
C2310.01
10.0KR292
CONVERTER
C2130.01
10.0KR257
10.0KR268
R26410.0
C2070.1
R26310.0
C2050.1
C2670.1
R34810.0
C2650.1
R34710.0
C2640.1
R34510.0
SPARE 3
TO SHEET 2
ANALOG OUT (RMT I/FACE) 3
100R255
0.1C208
R46475
R49475
MC74HC595ADU26
CR42
R52475
R18349.9
R18749.9
G
DS16 10C154
0.1C157
TP39
0.1C158
10C159
10.0KR261
10.0KR289
0.1C146
C2150.1
R26010.0
C2660.1
11SHIFT_CLK
8GND
16VCC
+3.3V
14ROUT2
15ROUT15 J20
4 J20
2 J20
9EN
1 J20
3 J10
1210R1751 J11
2 J11
3 J12
2 J12
+15V
(LVCMOS)
AES/EBUANALOG
FROM SHEET 1
1.0C149
-15V
9DACD
R24710.0K
TP42
VSWR_THRESHOLD11
DACB
ADC_REF
R27010.0K
25J23
10DACC
23J23
C2100.01
21J2312
DACA
12LATCH_CLK
G
DS12
G
DS11
0.1C75
G
DS9
G
DS810
RESET
13OE
10ROUT4
8 J20
7 J20
12GND
11ROUT3 1 SELECT
1210R152
2 J10
1 J10
6
4
5
3 J11
CR461SMB10CAT310V
R19310.0K
1 J12
+15V
+15V
FROM SHEET 1
C1320.1
I/Q AES/EBU
(LVCMOS)
6
5
7U55:B
-15V
-15V1
V+
5LATCH
4V-
6GND
AD8561ARUZU54:B
R23210.0K
TP40
10
9
8U66:C
10DACC
RF_MON_GAIN
C1900.01
R22710.0K
3
2
1U66:A
12DACA
C1990.1
5
6
7U74:B
9DACD
R28710.0K
R29010.0K
10
9
8U74:C 24J23
R26710.0K
3
2
1U74:A
22J2311
DACB
G
DS13
G
DS10
R19510.0K
6
4
5
2
3
1U55:A
1.0C145
R24410.0K
5
6
7U66:B
12
13
14U66:D
4ENABLE
16VCC
12ENABLE
8GND
DS26C32ATMU48:E
12
13
14U74:D
S2070310 SHEET 4 OF 7 V1
4VCC
11VEE
U74:EMC33074AD
4VIN
1GND1
2GND2
6VOUT
U65LT1790BIS6-2.5
76
5
1
0
1213
14
1
0
910
11
1
0
8V+
4V-
U55:COP275GS
4VCC
11VEE
U66:EMC33074AD
43
2
1
0
Issue 3.3 2017-03-31 SD-11
Figure SD-11: NAPC160B/01 Control/Interface PWB (Sheet 5 of 7)
0.1C169
+5V
+5V
+5V
+5V
4F
+5V
+5V
+5V
+5V
6 H
4F
14D
12B
E3:1
E3:2
+5V
+5V
+5V
+5V
3E
+5V
+5V
+5V
+5V
5G
3E
13C
11A
25 J24
9 J24
+15V-A
7 J24
+15V-A
4 J24
+15V-A
2 J24
+15V-A
INT
EXT
0.01C241CR7010.0K
R302
0.01C243CR7210.0K
R304
0.01C245CR7410.0K
R306
0.01C247CR7610.0K
R308
REMOTE INPUTS
7HOLD
3WP
1CS
6 SCK
1 SHIFT/LOAD
6 H
4750R280
4750R282
14D
4750R284
12B
4750R286
4GND
9QH
10SA
7QH
+5V16VCC
# DIGITAL INPUT 16 - 19 J24
# DIGITAL INPUT 15 -
# DIGITAL INPUT 14 - 17 J24
# DIGITAL INPUT 13 -
# DIGITAL INPUT 12 - 14 J24
# DIGITAL INPUT 11 -
# DIGITAL INPUT 10 - 12 J24
# DIGITAL INPUT 09 -
0.01C233CR6210.0K
R294
0.01C235CR6410.0K
R296
0.01C237CR6610.0K
R298
0.01C239CR6810.0K
R300
10SA
4750R272
4750R274
4750R276
4750R278
+5V
+5V
9QH
15CLK_INH
8GND
7QH
0.1C224
MISO
L17
TO SHEET 1
+15V (EXTERNAL)
+15V (REMOTE)
MOSI
SCK
24 J24
8 J24
+15V-A
+15V-A
6 J24
+15V-A
3 J24
+15V-A
1 J24
+15V-A
E3:3
0.01C240CR6910.0K
R301
0.01C242CR7110.0K
R303
0.01C244CR7310.0K
R305
0.01C246CR7510.0K
R307
8VCC
5SI
2CLK
4750R279
4750R281
5G
4750R283
13C
4750R285
11A
2SO
15CLK_INH
8GND
0.1C225
18 J24
16 J24
13 J24
11 J24
0.01C232CR6110.0K
R293R3134750
0.01C234CR6310.0K
R295R3154750
0.01C236CR6510.0K
R297
R3164750
R3184750
0.01C238CR6710.0K
R299R3194750
R3204750
2CLK
4750R271
3 6
4 5MOCD223-MU75:B
4750R273
3 6
4 5MOCD223-MU76:B
1 8
2 7MOCD223-MU76:A
4750R275
1 8
2 7MOCD223-MU77:A
4750R277
1 8
2 7MOCD223-MU78:A
0.1C221
16VCC
5 64
U70:B
1.0C141
1.0C268
RT2RXE110
R3144750
R3174750
1 8
2 7MOCD223-MU75:A
3 6
4 5MOCD223-MU77:B
3 6
4 5MOCD223-MU78:B
10.0KR253
L13RT1
RXE110
#CS_SERIAL_FLASH-
#CS_RMT_IN-
+15V
# DIGITAL INPUT 08 -
# DIGITAL INPUT 07 -
# DIGITAL INPUT 06 -
# DIGITAL INPUT 05 -
# DIGITAL INPUT 04 -
# DIGITAL INPUT 03 -
# DIGITAL INPUT 02 -
# DIGITAL INPUT 01 -
+15V-A
+15V-A
+15V-A
+15V-A
REMOTE INPUTS
1SHIFT/LOAD
10
+15V 9
MC74HC165ADU69
22J24
10J24
+15V21J24
FROM SHEET 1
+5V
S2070310 SHEET 5 OF 7 V1
EXTERNAL +15V SUPPLY
R3214750
3 6
4 5MOCD223-MU79:B
R3234750
3 6
4 5MOCD223-MU80:B
R3244750
1 8
2 7MOCD223-MU80:A
R3264750
1 8
2 7MOCD223-MU81:A
R3274750
R3284750
1 8
2 7MOCD223-MU82:A
AT25256AN-10SU2.7U58
+15V-A
+15V-A
+15V-A
MC74HC165ADU71
+15V-A
14VCC
7GNDU70:E
MC74HC125AD
+5V
23J24
20J24
5J24
15J24
R3224750
1 8
2 7MOCD223-MU79:A
R3254750
3 6
4 5MOCD223-MU81:B
3 6
4 5MOCD223-MU82:B
2 31
U70:A
Issue 3.3 2017-03-31 SD-12
Figure SD-12: NAPC160B/01 Control/Interface PWB (Sheet 6 of 7)
R1968.1K
0.1C51
10C53
9SQH
8GND
16 VCC
8GND
16VCC
0.1C255
0.1C254
0.1C253
0.1C252
0.1C251
0.1C250
0.1C249
0.1C248
TP17
TP8
0.1C87
FWD
TP14
TP1
7
8
0.01C227
0.01C226
13 OE
14A
14A
13OE
0.1C263
0.1C262
0.1C261
0.1C260
0.1C259
0.1C258
0.1C257
0.1C256
TP13
C1740.1
10
1
4
3
+5V
+5V
+5V
B+ SAMPLE
CURRENT SAMPLE
VOLTAGE SAMPLE
FROM SHEET 4
REFLD PWR SAMPLE
+5V
0.1C95
10C203
35V
10.0KR76
10C101
35V0.1C115
10.0KR94
0.1C36
10C49
RF_MON_GAIN
10.0KR225
1.0C90
0.1C91
1.0C102
10C125
35V10C189
35V
10C83
R114100
-5V
0.01C185
0.1C186
REFLD
RF MON
+3.3V
10C138
10C209
10C212
R911000
AD603ARU62
7VOUT
+3.3V
0.1C180
7J18
7J16
8J16
9J16
0.1C173
1.0C175
J7
B+ SAMPLE (EXCITER A)
CURRENT SAMPLE (EXCITER B)
CURRENT SAMPLE (EXCITER A)
VOLTAGE SAMPLE (EXCITER A)
RF MONITOR
SCKFROM SHEET 1
+5V
+5V
+5V
+5V
7QH
5QF
3QD
1QB
9SQH
11SHIFT_CLK
6QG
4QE
2QC
15QA
-5V
-5V
3 14
U84:C
7 10
U83:G
5 12
U83:E
3 14
U83:C
-15V 25J17
B5J3
+15V 13J17
12J19
15J23
19J23
17J23
14J23
12J23
5J23
8J23
6J23
3J23
1J23
-15V
+15V
+5V
FWD PWR SAMPLE
-15V
L5
+15V
L7
+5V
B+
10.0KR23
R88100
10.0KR223R224
3320
-15V
6810R20 0.01
C47
0.001C97
1.0C188R220
1000
TP38
+5V
0.1C181
0.01C183
4
65
S5:B
47C89
47C170
15.0KR80
3320R85
+15V
+5V
R980.0
5
6
7U52:B
R961000
+15V
3
2
1U36:A
5FDBK
GND GND GND
GND GND GND
TP16TP15TP12
R2081000
274R211
8J18
R126100
9J18
R110100
R90100
REFLD_PWR_SAMPLE
T3
B+ SAMPLE (EXCITER B)
VOLTAGE SAMPLE (EXCITER B)
MOSI
1SMB5939B39V
CR59
1SMB5939B39V
CR60
10C103
35V0.1C107
0.1C121
0.1C98
0.1C117
C1190.1
C1040.1
MC74HC595ADU73
11SHIFT_CLK
10RESET
12LATCH_CLK
4QE
6QG
2QC
12LATCH_CLK
7QH
15QA
MC74HC595ADU72
10RESET
5QF
1QB
3QD
7 10
U84:G
4 13
U85:D
2 15
U85:B
-15V
25J19
B2J3
13J19
+5V
24J19
24J1712J17
20J23
R339
12.1 R340
12.1R341
12.1 R342
12.1R343
12.1 R344
12.1
18J23
16J23
13J23
R336
12.1
11J23
10J23
9J23
R329
12.1 R330
12.1R331
12.1 R332
12.1R333
12.17J23
4J23
2J23
L2
2W20
R117
2W20
R118
R2263320
2W
R10510 100
R106
1
32
S5:A
10.0KR75
5
6
7U36:B
TP44 TP43TP36
C1771.0PWB PART:
HR106HW2
2
1
7U60:A
R95100
2W
R180150
10C118
35V
1SMB5939B39V
CR58
5 12
U84:E
R334
12.1R335
12.1
R337
12.1 R338
12.1
S2070310 SHEET 6 OF 7 V1
PWB PART:HR106
HW125 J122 J1
17 J1
9 J1
13 J1
4 J1
10C161
35V21 J1
11 J1
0.1C106
10C184
35V3 J1
15 J1
19 J1
10C50
10C1506 J1
23 J1
B8 J3
B9 J3
1.0C1791
GPOS
2GNEG
6VNEG
B7 J3
3VINP
B6 J3
11J19
21J18
22J18
10J16
23J18
24J16
11J16
-15V (EXCITER B)
-15V (EXCITER A)
+15V (EXCITER B)
RF SAMPLE PROBE
+15V (EXCITER A)
+5V (EXCITER B)
+5V (EXCITER A)
+5V (EXCITER B)
# DIGITAL OUT 16 -
# DIGITAL OUT 15 -
# DIGITAL OUT 14 -
# DIGITAL OUT 13 -
# DIGITAL OUT 12 -
# DIGITAL OUT 11 -
# DIGITAL OUT 10 -
# DIGITAL OUT 09 -
# DIGITAL OUT 07 -
# DIGITAL OUT 05 -
# DIGITAL OUT 03 -
# DIGITAL OUT 01 -
47C70
10C85
14 J1
20 J1
GND
8 J1
7 J1
1 J1
GND2 J1
18 J1
16 J1
5 J1
10 J1
5
6
7U41:B
R1081000
3
2
1U41:A
B3 J3
47.5R89
4COMM
B4 J3
8VPOS
1000R213
B1 J3
23J19
23J1711J17
20J18
20J16
21J16
10J18
22J16
11J18
24J18
#CS_RMT_OUT--15V
23J16
9COM
8GNDU83:H
MC1413BD
9COM
8GNDU84:H
MC1413BD
10C96
35V
8V+
4V-
U41:COPA2691ID
0.1C219
5 12
U85:E
1 16
U85:A
3 14
U85:C
4 13
U84:D
0.1C222
6 11
U83:F
4 13
U83:D
1 16
U84:A
+5V (EXCITER A)
# DIGITAL OUT 08 -
# DIGITAL OUT 06 -
# DIGITAL OUT 04 -
# DIGITAL OUT 02 -
R1271000
TP32
2IN
1N/C
3GND
5ADJ
4OUTLP38500TS-ADJ
U34
4700pFC116
10C111
35V
8V+
4V-
U36:COPA2691ID
9COM
8GND
U85:HMC1413BD
6 11
U84:F
4 V+
5COMP
6V-
3SHUTDOWN
LT1210CRU60:B
Issue 3.3 2017-03-31 SD-13
Figure SD-13: NAPC160B/01 Control/Interface PWB (Sheet 7 of 7)
-
+15V
GND
-
+
+15V
SYNC
(-)
(-)
R1001500
R12049.9
+
GND
(-)
(-)
R993320
+5V
+5V
+5V
R11949.9
1000R359
R12149.9
R13849.9
TP48
TP49
C1470.01
R13649.9
0.01C277
1000R357
R18149.9
R12249.9
TP50
+5V
0.1C131
7
PDM
5
4
3
2
1
FROM SHEET 1
2 J27
25 J5
4 J5
1 J5
7 J27
FROM SHEET 1
FROM SHEET 1
10 J5
(+) 22 J5
24 J5
(+)
10MHz (GPS) B2 J22
1 PPS (GPS)
R1563320
+15V
+15V
100R176
CR2924V
CR40BAT54HT1
CR39BAT54HT1
0.1C123
49.9R130
49.9R131
+5V
1000R177
7DO/RI
6DO/RI
5GND
1 SELECT
16VCC
11T1IN
2V+
13R1IN
4C2+
0.1C271
C1090.1
8GND
15GND
10T2IN
6V-
7T2OUT
E1:1
E1:2 INTERLOCK
E1:3
1 SELECT
+3.3V16VCC
+5V8GND
R10449.9
82.5R135
TO SHEET 1
(-)
TX (COMB CONT)
7J5
(+)19J5
6J27
8J27
TO SHEET 1
# ADDRESS (GPS) -B7J22
A8J22
A6J22
B1J22
A1J22
10MHz (EXCITER A)10MHz (EXCITER B)17J19
1KHz (EXCITER A)5J17
A9J22
1 PPS (EXGINE)
1 PPS (EXCITER B)1 PPS (EXCITER A)4J17
0.1C274
1SMB5939B39V
CR31
+5V
6
8
(+)
18 J5
16 J5
5 J5
14 J5
EXT 10 MHz
(+) 11 J5
8 J5
21 J5
1KHz (GPS)
B3 J22
B4 J22
R1551500
R1503320
R1491500
0.1C168
RT3RXE050
R35249.9
L12
10.0KR112
CR2624V
CR2824V
CR2124V
CR2424V
10.0KR102
10.0KR113
CR34 0.01C139
10.0KR160
CR32 0.01C136
1210R154
0.1C135
49.9R143
49.9R144
0.01C114
3 6
4 5MOCD223-MU42:B
+5V
49.9R141
49.9R142
49.9R132
49.9R133
0.1C130
7 10
U47:G
+5V
+5V
8
7
3
2
U54:A
R16927.4K1000
R178
DS36C278TMU40
9
10
11
U45:C
C2700.1
0.1C269
0.1C272
5C2-
3C1-
1C1+
+3.3V16VCC
15OE
0.1C273
8R2IN
R35149.9
14T1OUT
12R1OUT
9R2OUT
+5V
COMB CONT
1210R129
74LVC257APWU39
#EXT_PDM_INHIBIT-
#INTERLOCK_OPEN-
CR2224V
RX_(COMB_CONT)
+15V
#INTLK_OPEN_(COMB)-
C1100.1 +3.3V
15OE
C1200.1
R134121
R11649.9
3J27
4J27
TX (CONTROLLER)
+15V (CONTROLLER)
1J27
5J27
B6J22
A7J22
A3J22
A2J22
13J5
1KHz (EXCITER B)5J19
17J17
10MHz (EXGINE)A5J22
A4J22
4J19
J8
CR2524V
CR2724V
0.1C124
0.1C122
L9
RT4RXE110
CR7724V
R10349.9
R11549.9
INTERLOCK
RX (CONTROLLER)
RX (COMB CONT)
INTERLOCK (COMB CONT)
INTERLOCK (CONTROLLER)
1KHz (COMB CONT)
1 PPS (COMB CONT)
S2070310 SHEET 7 OF 7 V1
1RO
3DE
8VCC
TX_(COMB_CONT) 4DI
CR3024V
#SELECT_SYNC_INT-
10.0KR167
100R179
10.0KR168
#SELECT_SYNC_B-
+5V
ADM3202ARNU86
74LVC257APWU38
INHIBIT
SYSTEM
9COM
8GND
U47:HMC1413BD
10MHz (COMB CONT)
10.0KR159
1 8
2 7MOCD223-MU50:A
10.0KR153
3 6
4 5MOCD223-MU50:B
2RE
CR7924V
CR20
L10
7
6
5
U45:B
L8
1
2
3
U45:A
10.0KR101
CR2324V
CR7824V
1
6
4U87:A
1 16
U47:A
DISABLE
ENABLE
43
2
1
0
1213
14
1
0
76
5
1
0
2GND
5VCC
3VCC
U87:BNC7SZ57P6X
4ENABLE
16VCC
12ENABLE
8GND
DS26C32ATMU45:E
L11
15
14
13
U45:D 910
11
1
0
43
2
1
0
1213
14
1
0
76
5
1
0
910
11
1
0
Issue 3.3 2017-03-31 SD-14
Figure SD-14: NAPI106 Remote Interface PWB
1 J9
1 J85 J8
5 J7
4 J9
7 J9
3 J8
6 J8
8 J8
3 J7
6 J7
8 J7
15
13
11
09
07
05
03
01
+15V
+15V
+15V
+15V
+15V
+15V
4J5
6J5
6J4
1 J7
5 J9
3 J9
8 J9
6 J9
4 J8
7 J8
2 J7
4 J7
7 J7
16
14
12
10
08
06
04
02
+15V
+15V
+15V
+15V
+15V
+15V
3J5
7J5
8J5
3J4
4J4
S16
S14
S12
S10
S8
S6
S4
S2
15J2
5J2
# DIGITAL INPUT 15 -18J2
# DIGITAL INPUT 13 -16J2
# DIGITAL INPUT 11 -13J2
# DIGITAL INPUT 09 -11J2
# DIGITAL INPUT 07 -8J2
# DIGITAL INPUT 05 -6J2
# DIGITAL INPUT 03 -3J2
# DIGITAL INPUT 01 -1J2
# DIGITAL OUT 08 -
# DIGITAL OUT 07 -
# DIGITAL OUT 06 -
# DIGITAL OUT 03 -
# DIGITAL OUT 02 -
# DIGITAL OUT 01 -
1.0C1
1500R7
+15V+15V
CR5
E5:2
STATUS ALARM
E3:2
E3:1 E3:3STATUS ALARM
1500R1
+15V+15V
1500R8
+15V+15V
CR6
E6:2
STATUS
E4:2
STATUSE4:3E4:1
1500R2
+15V+15V
# DIGITAL OUT 08 -
# DIGITAL OUT 07 -
# DIGITAL OUT 06 -
# DIGITAL OUT 03 -
# DIGITAL OUT 02 -
# DIGITAL OUT 01 -
25 J1
22 J1
6 J6
7 J6
18 J1
1500R15
+15V
17 J1
CR13
E13:2
STATUS
E11:2
STATUSE11:1
11 J1
1500R9
+15V
ALARM
ALARME12:1
1J6
3J6
22J2
25J2
ALARM
ALARME12:3
S15
S13
S9
S11
S7
S5
S1
S3
10J2
# DIGITAL INPUT 16 -19J2
# DIGITAL INPUT 14 -
# DIGITAL INPUT 12 -14J2
17J2
# DIGITAL INPUT 10 -12J2
# DIGITAL INPUT 08 -9J2
# DIGITAL INPUT 06 -
# DIGITAL INPUT 04 -4J2
7J2
# DIGITAL INPUT 02 -2J2
+15V (REMOTE)
# DIGITAL OUT 05 -
# DIGITAL OUT 04 -
+15V
CR7
E7:2
STATUS ALARME7:1 E7:3
G DS7:B DS7:AR
E5:1 E5:3
1500R5
+15V+15V
CR3
1500R3
+15V+15V
G DS3:B DS3:AR
E1:1 E1:3
E1:2
G DS1:B
STATUS ALARM
DS1:AR
CR1
CR8
E8:2
STATUSE8:3E8:1
G DS8:B
E6:3E6:1
1500R6
+15V+15V
CR4
1500R4
+15V+15V
G DS4:B
E2:2
E2:1STATUS
G DS2:B
E2:3
CR2
# DIGITAL OUT 05 -
# DIGITAL OUT 04 -
23 J1
24 J1
21 J1
5 J6
CR15
19 J1
8 J6
E15:2
STATUSE15:1
G DS15:B
E13:1
1500R13
16 J1
+15V
CR11
1500R11
14 J1
13 J1
+15V
G DS11:B
12 J1
STATUS
G DS9:B
E9:1
E9:2
CR9
ALARME16:1
E14:1
ALARME10:1
23J2
2J6
4J6
24J2
ALARME16:3
DS16:AR
E14:3
DS12:AR
ALARM
DS10:AR
E10:3
G DS5:B DS5:AR G DS6:B G DS13:B DS14:AR
S2070046 SHEET 1 OF 1 V1
# DIGITAL INPUT 15 -
# DIGITAL INPUT 13 -
# DIGITAL INPUT 11 -
# DIGITAL INPUT 09 -
# DIGITAL INPUT 07 -
# DIGITAL INPUT 05 -
# DIGITAL INPUT 03 -
# DIGITAL INPUT 01 -
21 J2
20 J1 1J4
10 J1 1J3
8 J1 8J4
7 J1 2J3
ALARM
ALARM
1 J1 8J3
ANALOG OUTPUT 4
ANALOG OUTPUT 2
EXTERNAL +15V SUPPLY
# DIGITAL OUT 16 -
# DIGITAL OUT 15 -
1500R16
# DIGITAL OUT 14 -
CR14
E14:2
STATUS
# DIGITAL OUT 11 -
E12:2
STATUSE11:3
# DIGITAL OUT 10 -
# DIGITAL OUT 09 -
1500R10
ANALOG OUTPUT 4
ANALOG OUTPUT 2
EXTERNAL +15V SUPPLY
# DIGITAL OUT 16 -
# DIGITAL OUT 15 -
# DIGITAL OUT 14 -
# DIGITAL OUT 11 -
# DIGITAL OUT 10 -
# DIGITAL OUT 09 -
# DIGITAL INPUT 16 -
# DIGITAL INPUT 14 -
# DIGITAL INPUT 12 -
# DIGITAL INPUT 10 -
# DIGITAL INPUT 08 -
# DIGITAL INPUT 06 -
# DIGITAL INPUT 04 -
# DIGITAL INPUT 02 -
20 J2
1J55J5
9 J1
5 J1
15 J1
5J3
7J4
5J4
ALARM
DS8:AR
6 J1 3J3
4 J1
3 J1 6J3
4J3
DS4:AR
2 J1 7J3
ALARM
DS2:AR
ANALOG OUTPUT 1
ANALOG OUTPUT 3
CR16
E16:2
STATUSE15:3
DS15:AR G DS16:B
E13:3
# DIGITAL OUT 13 -
1500R14
# DIGITAL OUT 12 -
CR12
1500R12
DS11:AR G DS12:B
STATUS
DS9:AR G DS10:B
E10:2
E9:3
CR10
ANALOG OUTPUT 1
ANALOG OUTPUT 3
# DIGITAL OUT 13 -
# DIGITAL OUT 12 -
DS6:AR DS13:AR G DS14:B
Issue 3.3 2017-03-31 SD-15
Figure SD-15: NAPX46 GPS Sync PWB (Optional)
100R17
10C29
2RE
4DI
E1:1
0.1C18
R5274
4J3
ISP
2J1
4J1
8J1
10 MHz
SYNC
1 PPS
+5V
GND
TP1 TP9
5V 3.3V
0.1C31
3DE
1RO
TP8
GPS_RX
GPS_TX
274R22
274R24
1J3
2J3
6J3
5J3
3J3 3J1
274R25
RS-485 (-) 9 J1
RS-485 (+) 5 J1
7 J1ADDRESS
+5V
2GND
3IS
0.1C41
50 OHMS
1 J1L1
E2:1
6ADJ
50 OHMS
+3.3V
10C45
7B
6 A
8VCC+3.3V
E2:3
0.1C43
2210R13
10.0KR12
5GND
28ANT_CTRL
19 ACTIVE_PWR
27ANT_OC
25GPIO4
24GPIO13
22NRESET
AA003025-GU5
3BOOT
+3.3V
+5V
E1:3
18pFC8
18pFC7
+3.3V
8PD2/INT0/XCK1
7PD1/TXD0
19PC1/A9/PCINT9
21PC3/A11/PCINT11
44PB4/SS
37PA0/AD0
14XTAL2
15XTAL1
11PD5/OC1A
10 PD4/TOSC1
6VCC
4RESET
+5V
LOCK
MOSI
7 DIN
UNLOCK CPU
3VFB
0.1C15
0.1C2
10.0KR2
0.1C21
0.1C3
+3.3V
R349.9
10MHz
64I/O/GSR
38F3M17
36F3M15
32F3M4
39F3M10
22F3M2
28TDI
30TCK
54GND
21GND
33F3M11
35F3M14
61F2M5
31F3M3
6J4
4J4
2J4
1J4
R1049.9
# SYNC OK -
GPS ANTENNA J2
5EN
1IN
10.0KR16
6 J1 0.1C44
0.1C32
10.0KR19
5620R18
4GATE
TP7
10.0KR29
274R26
+5V
R2849.9
0.001C39
0.001C40
18pFC34
18pFC35
18pFC37
18pFC38
0.1C11
FDC640PQ1
+3.3VTP6
21V_BATT
20VCC_RF
26WAKEUP
23 GPS_FIX
8NANT_SC
9RF_ON
17RF_IN
1PWRIN
DS5G
+3.3V
PROGRAM/CAL
GPS 1PPS
18pFC23
18pFC5
0.1C14
0.1C16
0.1C1
5PDO/RXDO
41PB1/OC2
43 PB3/TXD1
42 PB2/RXD1
9PD3/INT1/CP3
ATmega162-16AUU3
17VCC
38VCC
+3.3V
10.0KR4
274R21
DS1G
MISO
SCLK
1VDD+3.3V
274R23
DS4G
GPS STATUS
DS3R
10.0KR6
+3.3V
TP2
4VOUT
8GND
DAC8531EU6
1PPS
+3.3V
+3.3V
0.1C13
0.1C17
TP4
5I/O/GTS12I/O/GTS2
27F3M9
40F3M12
42F3M16
52F4M12
29TMS
53TDO
25F3M8
24F3M5
14GND
41GND
63F2M8
4F2M12
20F1M17
TP3
59F2M4
34F3M6
3J4 JTAG
5J4
R1149.9
0.1C20
R949.9
R1549.9
R141.00 FDC640P
Q2
18pFC4
18pFC9
R2749.9
18pFC28
18pFC6
10.0KR1
0.1C26
0.1C25
TP5
S2130003 SHEET 1 OF 1 V3
#ANT_PS_ENABLE+
LTC1480IS8U12
VOLTAGEANTENNA
10C42
50 OHMS
10C30
+5V
ACQUIRE
28GND
35PA2/AD2
291PPS
32PA5/AD5
NORM 40PB0/OC0
E1:2 30PA7/AD7
27PE1/ALE
25PC7/A15/TDI
23PC5/A13/TMS
20PC2/A10/PCINT10
4RXA
1PB5/MOSI
5TXA
12PD6/WR
+3.3V
#RECEIVER_ENABLE-
2VREF
16I/O/GCK2
57F4M17
45F4M8
43 F4M2
46F4M3
AVR_CLOCK 15I/O/GCK1
CPLD_ACK 7 F2M17
SPARE_2 9F1M5
#1KHZ_ENABLE+ 11F1M8 +3.3V
#CPLD_SS- 13F1M4
55VCCIO
3VCCINT
58F2M3
1 kHz
51 F4M10
47 F4M448
F4M11
1 PPS
SELECT
18pFC27
18pFC33
MIC5159YM6U10
E2:2
8250R20
18pFC36
1IN
2GND
4GND
3OUT
U9GAT-12
3RF&DC
2ISOL
4RF
1DC
TCBT-2R5GU8
GND+3.3V
0.001C12
R30100
TP10
DS6G
10.0KR8
39GND
16GND
34PA3/AD3
DS2A
13PD7/RD
33PA4/AD4
36PA1/AD1
31PA6/AD6
29PE0/ICP1/INT2
18pFC24
26PE2/OC1B
24PC6/A14/TDO
Y114.7456MHz
18PCO/A8/PCINT8
7RXB
6TXB2
PB6/MISO
0.1C22
3PB7/SCK
22PC4/TCK/A12
6SCLK
5SYNC
23F1M12
18F1M10
44F4M5
49 F4M656
F4M15
62F2M6
#AVR_OK+
CPLD_ALIGN
CPLD_IRQ 8F1M2
6F2M15
1 F2M10
19 F1M15
SPARE_1
#1PPS_ENABLE+
26VCCIO
12F1M3
10F1M6
XC9572XL-10VQ64CU2
60F2M2
37VCCINT
50F4M14
1VC
14VCC
8OUT
7GND
OC14C-10M000U1
17I/O/GCK3
+3.3V0.1C19
18pFC10
2IN
1N/C
3GND
5ADJ
4OUTLP38500TS-ADJ
U11
18GND
16GND
14GND
12GND
11GND
2GND
30GND
15GND
13GND
10GND
10.0KR7
+3.3V
+3.3V
2VDD
3VSS
1RST
U4MCP120T-270I/TT
1IN
3GND
2OUTREF3033AIDBZT
U7
Issue 3.3 2017-03-31 SD-16
Figure SD-16: NAPI151 USB Audio Interface PWB (Optional)
10C13
+5V
0.1C1
1.0C4
10C2
+5V
(-)
(-)
+5V
+5V
C70.1
C80.1
C50.1
C60.1
0.1C3
1.0C14
+5V
19PGND
11ZGND
15VOUTR
27SSPND
9J2 SHLD
5J2 (+)
6J2
2J2 (+)
+5V
562R12
1XTO
28XTI
6DGND
12AGNDL
17AGNDR
21HOST
PCM2705DBU1
2CK
5DOUT
14VOUTL
18pFC9
18pFC10
1.00MR8 Y1
12.000MHz
10
9
8U2:C
4
5
6U2:B
1
2
3U2:A
13
12
11U2:D
0.1C11
R6100
R7100
221R10
R4100
R5100
221R9
4J2 AES/EBU
1J2 AES/EBU
SHLD3J23D+4V-
1V+2
D-
SHD
USB
J1
R111500
S2060291 SHEET 1 OF 1 V2
1.0C12
13VCCL
16VCCR
22HID0/MS
3DT
26TEST0
7VDD
8D-
OUTPUT 2
OUTPUT 1
DS1G
L1
22.1R1
14VCC
7GNDU2:E
SN74AHC86D
18VCOM
20VCCP
1500R3 4
5
6
1
3
1
1
1
T2
4PSEL
23HID1/MC
25 TEST1
24HID2/MD
4
5
6
1
3
1
1
1
T19 D+
10 VBUS
R222.1
Issue 3.3 2017-03-31 SD-17
Figure SD-17: NAPI152A Rack Interface PWB (Sheet 1 of 3)
(-)
(+)
(-)
(+)
(-)
(+)
(+)
FROM
(-)
(+)
(-)
(+)
+5V
+5V
+5V +5V
18pFC13
D0D1
D3
D5D6
3J16
6J16
1J16
5J16
GND
MOSI
MISO
RESET
A8
A10
A13A12
A1
A3
A5
A7
D6
D0D1
D3
D5D6
+5V
VREF
+5V
SCK
MISO
TO
(-)
(-)
(+)
+5V
+5V
+5V
1.0C2
221R44
TP5
TP61
0.1C38
CPU
D2
D4
D7
+5V +5V
TP56
TP55
+5V
+5V
TP60
2J16
4J16
ISP
A11
A9
A14
A0
A2
A4
A6
VREFTP28
0.1C76
0.01C77
D0
D2
D4
D2
D4
D7
R154100K
R144100K
MOSI
+5V
TP63 TP71R65
1000
+5V
5 J122 (RECT)
19 J12
1 (RECT)FAN TACH
14 J1
5 J1(COLUMN 1)
6 J1
14 J2
5 J2(COLUMN 2)
6 J2
MODULE BUS6 J3
MODULE BUS
14 J5
MODULE BUS(COLUMN 5)
SHEET 3
24 J11
12 J11
0.047C201
0.047C1900.047
C191
1W
R2183.9
1W
R2153.92.0
R210
LAST
0.1C215
1.0C213
0.1C211
1.0C210
+5V
+5V
221R221
221R262
+5V
221R1
221R259
+5V
3DE
1RO
3DE
4DI
5GND
2REDS36C278TM
U33
1RO
DS36C278TMU32
2RE
4DI
3DE
2RE
1RO
5GND
#HIGH_DC_CURRENT-
#LOW_AC-
4750R200
+5V
8PE6/T3/INT6
26PD1/SDA/INT1
#EOC-
64AVCC
0.1C39 52
VCC
62AREF
60PF1/ADC1
58PF3/ADC3
191PG4/TOSC1
TP13TP14 56
PF5/ADC5/TMS
TP3TP4 30
PD5/XCK132
PD7/T2
TP8 1PEN
27PD2/RXD1/INT2
28PD3/TXD1/INT3
4PE2/XCK0/AIN0
2PE0/RXD0/PDI
22GND
53GND
+5V
R36
274
R37
274
+5V
#RD-
D1
D3
D5
D7
+5V
FROMSHEET 2
4REFC
2REFA
1GND
14VDD
7CLK
B+_LEVEL
DC_CURRENT
0.1C58
0.01C57
20CE
27WE
A1 A1 23A1
A3A4 A4 26
A4
A6 A6 2A6
A8A9 A9 5
A9
A11 A11 7A11
A13A14 A14 10
A14
10.0KR98 0.01
C81
6810R66
+5V
+15V14
GND
D112I/O1
D315I/O3
18I/O6
RAM
R931000
R10210.0
0.1C196
0.1C120
0.1C73
0.1C66
TO SHEET 2
#LOW_AC-
CONTROL24J12
SHEET 2
18 J12
6 J12
FAN TACH
MODULE BUS
MODULE BUS
14 J3
(COLUMN 3)5 J3
6 J4
5 J4
14 J4
(COLUMN 4)
6 J5
5 J5
(OUT)
12 J10
24 J10
(IN)
R197221
R195221 0.022
C159
0.022C160
1W
R2493.92.0
R256
0.047C216
0.047C212
1W
R2433.9
1W
R2443.92.0
R240
0.047C209
1W
R1863.92.0
R190
0.047C142
RACK
0.1C147
49.9R193
L4
+5V
221R247
221R248
221R267
221R268
+5V
221R242
221R266
+5V
1.0C204
0.1C203
1.0C194
0.1C193
221R232
+5V
221R263
221R220
+5V
221R261
0.1C1
221R4
221R260
0.1C41
0.01C42
+5V
221R45
681R47
4DI
5GND
2RE
DS36C278TMU35
5GND
2RE
1RO
DS36C278TMU34
3DE
1RO
4DI
3DE
5GND
4DI
1RO
2RE
5GND
DS36C278TMU1
R180
100
3DE
4DI
0.022C24
R135221
13 12
U5:F
0.022C16
R132221
11 10
U5:E
FROM SHEET 2
+5V
4750R203
TP52
9PE7/IC3/INT7
R14100
R12100
7PE5/OC3C/INT5
6PE4/OC3B/INT4
25PD0/SCL/INT0
23XTAL2
24XTAL1
21VCC
0.1C181
59PF2/ADC2
31PD6/T1
61PF0/ADC0
TP10
TP11
TP1 18PG3/TOSC2
57PF4/ADC4/TCK
55PF6/ADC6/TDO
54PF7/ADC7/TDI
TP50
29PD4/IC1
5PE3/OC3A/AIN1
3PE1/TXD0/PDO
20RESET
+5V
R2810.0K
TP6
4750R258
#CS_ADDR-
R15710.0K
63GND
10.0KR100
10.0KR124
+5V
R38
274
0.1C28
#CE-
#WR-
TP58
D0
D2
10.0KR26
D4
D6
TP64TP62 TP70
+5V
+5V
1.0C90
1.0C79
0.1C83
10.0KR99
DAC
5REFD
0.1C86
8LOAD
3REFB
13LDAC
6DATA
TLV5620IDU18
AC_SAMPLE
+5V
A0 A0 21A0
22OE
28VCC
A2
A3
A5 A5
A7
A8
A10 A10
A2
A7
24A2
25A3
3A7
1A5
6A10
4A8
A12
A13
A12 8A12
9A13
10.0KR92
10.0KR82
10.0KR89
0.01C67
10.0KR62 0.01
C53
+5V
+15V
+15V
13I/O2
11I/O0
D5
D7
17I/O5
16I/O4
19I/O7
R841000 0.1
C72 R8810.0
TP27
TP29
TP15
R531000
R481500
0.1C48
5
4
2U23:A
R61100K
0.1C17
0.1C60
R1531500
R1551500
7
6
1U23:B
R51100
R524750
TP25
#HIGH_DC_CURRENT-
B+ LEVEL11J12
1W
R2303.92.0
R222
14
3
S1:3
221R235
221R233
+5V
221R264
221R265
681R41
R181
100DS36C278TMU10
4750R182
4750R202
1
2
3U31:A
TP53
R11100
TP51
10.0KR39 TP59
0.1C100
0.1C43
0.01C45
TP72 10.0KR83 0.01
C68
0.1C85
9
8
14U23:C
INTERNAL BUS
S2070167 SHEET 1 OF 3 V5
7DO/RI
6DO/RI
7DO/RI
6DO/RI
6DO/RI
MODULE INTERFACE 3
8VCC
MODULE INTERFACE 2
8VCC
+15V
8VCC
7DO/RI
6DO/RI
35PC0/A8
37PC2/A10
40PC5/A13
42PC7/A15
33PG0/WR
50PA1/AD1
3D1
18Q1U8:B18pF
C1848
PA3/AD3
5D3
16Q3U8:D
Y111.0592MHz
45PA6/AD6
7D5
14Q5U8:F
9D7
12Q7U8:H+5V
0.1C14
16PB6/OC1B
17PB7/OC2/OC1C
152
S1:2
11PB1/SCK
13PB3/MISO
PROG CLK
1.0C195
1.0C121
1.0C75
CY62256LLU13
11DACB
12DACA
#CS_DIGITAL_OUT-
#CS_ADC2-
10.0KR148
INTERNAL BUS
1000R19
1000R15
1000R196
1000R198
MODULE INTERFACE 5
0.047C214 8
VCC
1W
R2533.9
12
13
11U31:D8
VCC
MODULE INTERFACE 4
0.047C200
8VCC
9
10
8U31:C
7DO/RI
7DO/RI
6DO/RI
0.047C185
7DO/RI
6DO/RI
1W
R1873.9
49.9R194
MODULE INTERFACE 1
TP57
+5V
SERIAL INTERFACE
36PC1/A9
39PC4/A12
38PC3/A11
TP65
41PC6/A14
34PG1/RD
2D0
19Q0U8:A
4D2
17Q2U8:C
TP66
51PA0/AD0
43PG2/ALE
46PA5/AD5
47PA4/AD4
49PA2/AD2
6D4
15Q4U8:E
8D6
13Q6U8:G
44PA7/AD7
VERSION10.0KR168
SPARE
15PB5/OC1A
14PB4/OC0
#CS_DAC-
L1
10PB0/SS
12PB2/MOSI
ATmega128-16AIU6
PROG VCC
1.0C12
1.0C62
R9410.0K
R9010.0K
12
13
14U16:D
9DACD
10DACC
3
2
1U12:A
R8112.1K
R540.0
#CS_DIGITAL_IN-
#CS_ADC1-
#HIGH_B+_LEVEL+
Q1MMFT960T1
1W
R2263.9
13
4
S1:4
TP54
4
5
6U31:B
20VCC
10GND
1
11 LATCHENABLE
OUTPUTENABLE
U8:ISN74AHC573DW
3VCC
1GND
2RESET
U7ADM803MAKS
4VIN
1GND1
2GND2
6VOUT
U19LT1790BIS6-2.5
10.0KR35
10
9
8U16:C
10
9
8U12:C
10.0KR152
R8010.0
14VCC
7GNDU31:E
MC74ACT08D
#HIGH_B+_LEVEL+ 3VCC
12GNDU23:E
MC3302D
14VCC
7GND
U5:GSN74AHCT14D
4VCC
11VEEU16:E
MC33074AD
4VCC
11VEE
U12:EMC33074AD
Issue 3.3 2017-03-31 SD-18
Figure SD-18: NAPI152A Rack Interface PWB (Sheet 2 of 3)
1210R43
*
+5V
13OE
9SQH
0.1C125
+5V
0.01C126
+5V
6J14
5J14
1
2
5
6
+15V
ADC
75K
MOSI
SCK
8GND
16VCC
14A
TP45
TP77
TP68
R16910.0
TP75
3
4
7
8
0.01C131
TP44
TP67
TP69
AC SAMPLE
SPARE
DC CURRENT
RECTIFIER TEMP
B+ SAMPLE
+15V
-15V-B_SAMPLE
-15V-A_SAMPLE
-15V_SAMPLE
+30V-B_SAMPLE
+30V-A_SAMPLE
+30V_SAMPLE
+5V-B_SAMPLE
+5V-A_SAMPLE
+5V_SAMPLE
#CS_ADC2-
VREF
SCK
T1E1
CR2 CR1
0.047C82
+5V
+5V
+5V
R13947.5K
15CS
18I/O_CLK
18I/O_CLK
1A0
2A1
3A2
4A3
5A4
6A5
0.1C167
9A8
11A9
12A10
VREF
+5V
10.0KR114
R204
68.1KNAPI152
VREF
+5V
116
S1:6
+5V
+5V
0.1C74
1.0C71
+5V
TO SHEET 1
TO SHEET 1
B+ SAMPLE10J11
FROM SHEET 1
SPARE 13 J15
# ARC DETECT B - 19 J15
20 J15
# ARC DETECT A - 18 J15
PHASE LOST A 20 J12
24 J15
# 15V PS OK A -
23 J15 0.47C174
NX25
6QG
7QH
5 12
U29:E4QE
3QD
1QB
2CLK
1SHIFT/LOAD
TP47 6H
4F
11 10
U27:E 3E
14D
13C
TP48
0.001C133
+5V
+5V
9QH
15CLK_INH
8GND
SCR +12V12J15
10J15
5J15
TO SHEET 1MISO
FROM SHEET 3
FROM SHEET 1
+5V
MOSI
#CS_ADC1-
+48V_SAMPLE
+48V-A_SAMPLE
+48V-B_SAMPLE
E2
33C8
63V
R1747.5K 3320
R104
R1880.0
0.001C89
1.0C4
1500R6
1820R7
0.001C107
3920R122
R1215620
0.1C44 R46
475K
0.001C93
0.001C3
0.1C92
0.1C96
22.1KR108 R109
475K
0.001C97
0.1C111
0.1C104
2210R136 R126
475K
R123475K
0.1C99R106
475K
+5V
R6947.5K
R7047.5K
R7147.5K
TP20
TP16
TP21
R7347.5K
R7447.5K
R7547.5K
TP22
TP23
TP18
R9647.5K
R9547.5K
TP24
TP30
TP31
R1460.0
R13047.5K
R12947.5K
R12847.5K
TP34
TP33
TP36
R1490.0
R14147.5K
R14047.5K
TP39
TP40
R14547.5K
TP42
R13847.5K
TP38
0.1C149
0.1C150
0.1C151
4A3
1A0
2A1
3A2
0.1C153
0.1C154
0.1C155
5A4
6A5
7A6
8A7
TLC1543IDWU15
0.1C157
0.1C158
9A8
11A9
12A10
17ADDRESS
15CS
17ADDRESS
0.1C162
0.1C163
0.1C164
0.1C166
7A6
TLC1543IDWU21
0.1C171
0.1C169
8A7
0.1C168
0.1C88
1.0C87
0.01C84
0.1C78
BAT54HT1CR5
+5V
BAT54HT1CR8
NAPI152A
0.01C106
0.1C102
0.1C115
1.0C113
CTRL RACK
CTRL RACK125
S1:5
0.1C123
1.0C122
0.1C129
1.0C128
1SMB5939B39V
CR14
+5V
0.1C98
1.0C105
MISO
#EOC-
23J11
25 J15
7 J12
# 15V PS OK B -
8 J15
7 J15
10RESET
+5V0.47C183
R205100
+5V0.47C173R125
100BAT54HT1CR25
R207100
R166100
R167100 +5V
98
S1:8
107
S1:7
5QF
2QC
4 13
U29:D
2 15
U29:B
1 16
U29:A15QA
R16110.0K
TP46
13 12
U27:F
5G
9 8
U27:D
5 6
U27:C
3 4
U27:B
11A
12B
3 14
U29:C
4750R179
0.001C134
R17010.0
R17110.0
TP74
TP73
2 31
U24:A
10SA
7QH
16VCC
11J15
9J15
6J15
R10110.0K
15.0KR133
R113475K
R670.0
R6847.5K
R13147.5K
R7647.5K
R7247.5K
TP32
TP19
TP17
R1470.0
R12747.5K
R13747.5K
TP43
TP35
TP41
0.1C148
0.1C152
0.1C156
0.1C161
0.1C165
0.1C170
0.1C130
1500R164
1500R158
1500R163
R206100
R16010.0K
1 2
U27:A
S2070167 SHEET 2 OF 3 V5
22 J12
21 J12
4 J12
17 J12
12 J12
13REF-
14REF+
20VCC
* DENOTES SEE CHART BELOWFOR COMPONENT VALUE.
10GND
14REF+
20VCC
AC_SAMPLE
MC74HC595ADU28
11SHIFT_CLK
#CS_DIGITAL_IN-
MC74HC165ADU26
0.47C175
1500R165
+5V
PDM INPUT CONTROL
# INHIBIT SCR -
INHIBIT 48V B-
INHIBIT 48V A-
INHIBIT 48V A+
0.1C46R42
8250
R515K
10.0KR110
12
13
14U17:D
9 J12
10
9
8U20:C
8 J12
3
2
1U20:A
10C146
35V
25 J12
10GND
19EOC
16DATA_OUT
16DATA_OUT
19EOC
13REF-
B+_LEVEL
DC_CURRENT
0.1C135
4750R172
+5V
1 8
2 7MOCD223-MU30:A
TP76
#CS_DIGITAL_OUT- 12LATCH_CLK
10.0KR156
5 64
U24:B
1500R159
0.47C182
1500R162
0.47C184
+5V
+5V
INHIBIT 48V B+
5
6
7U20:B
12
13
14U20:D
*R204
RT20RXE110
9COM
8GNDU29:H
MC1413BD
14VCC
7GNDU27:G
SN74AHCT14D
4VDD
11GNDU20:E
TLV2374ID
14VCC
7GNDU24:E
MC74HC125AD
4VDD
11GND
U17:ETLV2374ID
Issue 3.3 2017-03-31 SD-19
Figure SD-19: NAPI152A Rack Interface PWB (Sheet 3 of 3)
5J9
4J9
2J9
1J9
8J8
7J8
5J8
4J8
2J8
1J8
2VIN
1.0C51
3J1
4J2
4J3
4J4
3J51J2
2J2
2J11J1
2J51J5
2J41J4
7J1
19J1
1J3
2J3
19J27J2
19J57J5
7J4
19J4
7J3
19J3
0.1C179
0.1C144
TP7
2VIN
0.1C64
10C36
35V1.0C35
4J1
3J2
3J3
3J4
4J5
10C47
35V
4 J13
4 J14
16 J1
16 J2
16 J3
16 J4
16 J5
2 J6
1 J7
S2070167 SHEET 3 OF 3 V5
24J1
25J1
13J1
11J1
24J223J2
12J2
25J3
23J313J3
11J3
24J4
12J4
13J4
25J5
23J5
12J511J5
22J15
22J1
20J1
8J1
21J2
10J2
20J3
9J3
22J4
10J4
8J4
21J5
9J5
16J11
11J11
10J12
15J8
+15V
+15V
25 J1023 J10
20 J10
14 J1013 J10
7 J10
1 J10
20 J11
14 J11
7 J11
1 J11
14 J15
16 J15
0.1C117
0.1C119
15J12
1J12
2J12
TO SHEET 2+15V
L5
L3
24 J9
10 J9
12 J8
11 J8
23 J8
4GND
6TRIM
7SENSE
1ON/OFF
0.1C26
3SEQ
5VOUT
0.1C103
0.1C56
1210R9
R1208250
R798250
0.1C143
0.1C32
0.1C33
0.1C30
0.1C31
10.0KR23
0.1C101
0.1C91
-15V-B_SAMPLE
TO SHEET 2-15V-A_SAMPLE
-15V_SAMPLE
8J11
21J11
23J12
18J9
19J9
+30V-B_SAMPLE
+30V_SAMPLE
16J12
+5V-A_SAMPLETO SHEET 2
2J13
2J14
19J11
6J115J11
16J915J9
3 J14
3 J13
15 J2
15 J4
15 J1
15 J3
15 J5
1000C10
50V
2 J7
1 J6
12J1
23J1
11J2
13J2
25J2
24J3
23J4
25J4
11J4
12J3
21J15
13J5
24J5
22J2
20J2
9J1
10J1
21J1
9J28J2
22J321J3
8J3
10J3
10J5
20J5
22J5
9J4
21J420J4
RT21RUEF600
8J5
3J112J11
15J11
16J8
14J8
17 J10
9 J10
22 J10
4 J10
25 J1122 J11
9 J11
17 J11
13 J11
2 J151 J15
15 J15
4 J11
PWB PART:HAQ36_T
HW2
MBR1660CR16
3 J15
4 J15
17 J15
MBR1660CR15
RT19RXE250
RT18RXE250
RT4RXE250
RT8RXE250
0.1C114
0.1C136
1000R151
1000R176
1000R173
R142475K
R134475K
14J12
10C124
35VRT16
RXE250
RT14RXE250
47C180
25VRT12
RUEF600
47C145
25VRT11
RUEF600
11 J9
23 J9
25 J8
24 J8
10 J8
GNDGNDGND GND
TP26 TP49TP37
10C65
35V
10C95
35V
5VOUT
3SEQ
ATL010A0X43-SRU4
1ON/OFF
6TRIM
7SENSE
4GND
ATL010A0X43-SRU2
0.1C11 C9
0.1C150.1
0.1C34
47C178
16V0.1C177
1.0C176
1210R199
0.1C5
1.0C6
47C7
16V
1210R192
1210R119
0.1C69
1210R85
8250R87
R3415.0K
R6015.0K
MBR1660CR3
MBR1660CR4
R2115.0K
Q3S4065K
0.1C172
Q2S4065K
R116475K
R11210.0K9
10
8U17:C
R117475K
R9110.0K6
5
7U17:B
R9710.0K
0.1C55
0.1C61
1000R32
R58475K
R33475K
1000R59
0.1C59
0.1C54 R64
475K
15.0KR56
0.1C29
0.1C25
10.0KR111
10.0KR30
R105475K
R31475K
15.0KR107
TO SHEET 2
20J9
+30V-A_SAMPLE
3J12
+5V-B_SAMPLE
+5V_SAMPLE
1J14
1J13
18J11
+5V
14J9
MBR1660CR17
22000C127
80V
0.1C116
0.1C137R143
475K
RT10RXE250
RT2RXE250
RT6RXE250
10C118
35VRT15
RXE250
RT13RXE250
C230.1
C270.1
1210R10
0.1C63
1210R77
R2415.0K
R115475K
2
3
1U17:A
R22475K
1000R57
+15V RETURN (COLUMN 1)
+15V RETURN (COLUMN 2)
+15V RETURN (COLUMN 3)
+15V RETURN (COLUMN 5)
+15V (ARC DETECT A)
+15V RETURN
+15V (COLUMN 1)
+48V (A)
+15V (COLUMN 3)
+15V (COLUMN 4)
+15V (RECTIFIER)
TO SHEETS 1 & 2
TACH (COLUMN 1 FAN 1)
TACH (COLUMN 2 FAN 2)
TACH (COLUMN 2 FAN 1)
+48V RETURN (RECTIFIER FAN 2)TACH (COLUMN 3 FAN 2)
TACH (COLUMN 4 FAN 2)
TACH (COLUMN 4 FAN 1)
TACH (COLUMN 5 FAN 2)
TACH (COLUMN 5 FAN 1)
+48V (RECTIFIER FAN 2)
+48V (RECTIFIER FAN 1)
+48V (COLUMN 5 FAN 2)
+48V (COLUMN 5 FAN 1)
+48V (COLUMN 4 FAN 2)
10C52
35V+48V (COLUMN 4 FAN 1)
+48V (COLUMN 3 FAN 2)
+48V (COLUMN 3 FAN 1)
+48V (COLUMN 2 FAN 2)
+48V (COLUMN 2 FAN 1)
+48V (COLUMN 1 FAN 2)
+48V (COLUMN 1 FAN 1)
+48V-B_SAMPLE
R11810.0K
R7810.0K
1.0C94
R8610.0K
PWB PART:HR67_S
HW1
TACH (COLUMN 1 FAN 1)
TACH (COLUMN 2 FAN 1)
TACH (COLUMN 2 FAN 2)
TACH (COLUMN 3 FAN 2)
TACH (COLUMN 4 FAN 2)
TACH (COLUMN 5 FAN 2)
TACH (COLUMN 4 FAN 1)
TACH (COLUMN 5 FAN 1)
-15V (CONTROL)
-15V (RECTIFIER)
+30V (RECTIFIER)
+5V (RF DRIVE)
+5V (PDM)
+5V (CONTROL)
TO SHEETS 1 & 2
+15V RETURN (COLUMN 4)
1000C132
50V
+48V (B)+15V (COLUMN 2)
+15V (CONTROL)
R15022.1K
R17422.1K
+15V (COLUMN 5)
TACH (COLUMN 1 FAN 2)
+48V RETURN (RECTIFIER FAN 1)TACH (COLUMN 3 FAN 1)
+48V RETURN (COLUMN 2)
+48V RETURN (COLUMN 1)
+48V RETURN (COLUMN 3)
+48V (COLUMN 1)
+48V RETURN (COLUMN 5)
+48V RETURN (COLUMN 4)
+48V (COLUMN 3)
22.1KR178
+48V (COLUMN 2)
+48V (COLUMN 5)
+48V (COLUMN 4)
RT1RXE250
RT5RXE250
10C37
35V
RT9RXE250
+48V_SAMPLE
10C22
35V
+48V-A_SAMPLE
0.1C112
0.1C109
0.1C108
0.1C110
1.0C70
MBR1660CR7
MBR1660CR6
1N5920C6.2V
CR23
A1
A2K
U3STPS40L15CW
1N5920C6.2V
CR22
TACH (COLUMN 1 FAN 2)
TACH (COLUMN 3 FAN 1)
R17522.1K
22.1KR177
RT17RXE250
RT7RXE250
RT3RXE250
10C80
35V
2-IN
1+IN
5-OUT
3+OUT
4COMAEE00CC18-L
U25
2-IN
1+IN
5-OUT
3+OUT
4COMAEE00CC18-L
U11
2-IN
1+IN
5-OUT
3+OUT
4COMAEE00CC18-L
U22
2-IN
1+IN
5-OUT
3+OUT
4COMAEE00CC18-L
U14
Issue 3.3 2017-03-31 SD-20
Figure SD-20: NAPI98 RF Drive Distribution PWB (Sheet 1of 2)
+5V
-
+
10C101
H6J3H3J3
H2J3H1J3
G6J3G3J3
G2J3G1J3
F6J3F3J3
F2J3F1J3
E6J3E3J3
E2J3E1J3
D6J3D3J3
D2J3D1J3
C6J3C3J3
C2J3C1J3
B6J3B3J3
B2J3B1J3
A6J3A3J3
A2J3A1J3
+-
+-
+-
+-
+
-
+
-
+-
+-
+-
+-
+-
+-
+-
+
-
+-
+-
0.1C67
-+
-+
-+
-+
-
+
-
+
-+
-+
-+
-+
-+
-+
-+
-
+
-+
-+
16O8
14O7
12O6
11O5
9O4
7O3
5O2
3O1
+5V
0.1C79
0.1C80
0.1C68
18O9
TP2
+5V
+5V
+5V
+5V
+5V
+5V
+5V
4 J5
2 J5
2 J4
1 J4
1.0C13
1.0C38
1.0C16
1.0C99
0.1C63
1.0C51
+5V
+5V
+5V
1IN
19O10
16O8
14O7
12O6
11O5
9O4
7O3
5O2
3O1
+5V
+5V
+5V
19O10
16O8
14O7
12O6
11O5
9O4
7O3
5O2
3O1
H3J2
H6J2
H1J2
H2J2
G3J2
G6J2
G1J2
G2J2
F3J2
F6J2
F1J2
F2J2
E3J2
E6J2
E1J2
E2J2
D3J2
D6J2
D1J2
D2J2
C3J2
C6J2
C1J2
C2J2
B3J2
B6J2
B1J2
B2J2
A3J2
A6J2
A1J2
A2J2
0.1C71
+5V
+5V
+5V
17GND
13GND
6GND
15VCC
8VCC
4VCC
-+
H6J1H3J1
-+
H2J1H1J1
-+
G6J1G3J1
-+
G2J1G1J1
-
+
F6J1F3J1
-
+
F2J1F1J1
-+
E6J1E3J1
-+
E2J1E1J1
-+
D6J1D3J1
-+
D2J1D1J1
-+
C6J1C3J1
-+
C2J1C1J1
-+
B6J1B3J1
-
+
B2J1B1J1
-+
A6J1A3J1
-+
A2J1A1J1
+5V
+5V
+5V
+5V
3 J5
1 J5
RF DRIVE 1
R70.0
1.0C20
1.0C44
1.0C37
1.0C14
1.0C15
1.0C39
1.0C103
+5V
475R11
475R12
GNDGND
82.5R8
0.1C102
1
2
3
U31:A
0.1C75
+5V
1.0C87
0.1C64
0.1C76
1.0C88
1.0C52
18O9
IDT74FCT807CTSOU26
+5V
18O9
IDT74FCT807CTSOU28
3
2
1
U17:A
5
6
7
U17:B
3
2
1
U5:A
3
2
1
U18:A
5
6
7
U18:B
3
2
1
U6:A
3
2
1
U19:A
5
6
7
U19:B
3
2
1
U7:A
3
2
1
U20:A
5
6
7
U20:B
3
2
1
U8:A
+5V
0.1C83
0.1C84
0.1C72
10GND
2GND
20VCC
IDT74FCT807CTSOU30
1IN
5
6
7
U21:B
3
2
1
U9:A
3
2
1
U21:A
3
2
1
U10:A5
6
7
U22:B3
2
1
U22:A
5
6
7
U23:B
3
2
1
U11:A
3
2
1
U23:A
5
6
7
U24:B
3
2
1
U12:A
3
2
1
U24:A
RF DRIVE 1
L3
R50.0
1.0C40
TP1
15
14
13
U31:D
5
6
7
U5:B
5
6
7
U6:B
5
6
7
U7:B
5
6
7
U8:B
5
6
7
U9:B
5
6
7
U10:B
5
6
7
U11:B
5
6
7
U12:B
S2070001 SHEET 1 OF 2 V1
0.1C1
0.1C26
0.1C4
0.1C98
17GND
17GND
10GND
10GND
1.0C55
15VCC
15VCC
8VCC
8VCC
4VCC
4VCC
1IN
19O10
1.0C59
0.1C8
0.1C32
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU20:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU8:E
0.1C2
0.1C25
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU13:E
0.1C3
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU14:E
0.1C27
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU4:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU15:E
0.1C100
4ENABLE
16VCC
12ENABLE
8GND
DS26C32ATMU31:E
82.5R6
5
6
7
U13:B3
2
1
U13:A
3
2
1
U1:A
13GND
13GND RF DRIVE 1
3
2
1
U14:A
5
6
7
U14:B
3
2
1
U2:A
6GND
20VCC
1.0C91
2GND
20VCC
2GND
6GND
3
2
1
U15:A
5
6
7
U15:B
3
2
1
U3:A
1.0C92
1.0C56
5
6
7
U16:B3
2
1
U16:A
3
2
1
U4:A
RF DRIVE 1
1.0C95
1.0C96
1.0C60
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU1:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU3:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU2:E
0.1C28
4
1
3
2
L2
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU16:E
5
6
7
U1:B
5
6
7
U4:B
5
6
7
U3:B
5
6
7
U2:B
Issue 3.3 2017-03-31 SD-21
Figure SD-21: NAPI98 RF Drive Distribution PWB (Sheet 2 of 2)
-
+
0.1C10
0.1C35
0.1C5
0.1C7
+5V
+5V
+5V
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+5V
+5V
+5V
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0.1C9
0.1C33
0.1C34
0.1C11
0.1C12
0.1C36
0.1C6
0.1C30
0.1C31
+5V
475R9
+5V
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+5V
0.1C29
+5V
+5V
+5V
+5V
+5V
+5V
+5V
+5V
R40.0
0.1C97
17GND
10GND
6GND
20VCC
15VCC
1.0C50
18O9
RF DRIVE 2
+5V
+5V
+5V
0.1C66
13GND
6GND
2GND
20VCC
15VCC
1.0C54
RF DRIVE 2
17GND
10GND
2GND
20VCC
15VCC
1.0C58
RF DRIVE 2
+5V
+5V
+5V
+5V
+5V
+5V
8 J4
R20.0
7 J4
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU21:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU9:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU22:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU23:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU5:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU24:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU6:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU7:E
82.5R3
475R10
82.5R1
13GND
2GND
1.0C49
1.0C85
1IN
8VCC
4VCC
1.0C86
IDT74FCT807CTSOU25
16O8
14O7
11
10
9
U13:C
13
14
15
U13:D
11
10
9
U1:C
12O6
11O5
13
14
15
U14:D11
10
9
U14:C
11
10
9
U2:C
9O4
7O3
13
14
15
U15:D11
10
9
U15:C
11
10
9
U3:C
5O2
3O1
13
14
15
U16:D11
10
9
U16:C
11
10
9
U4:C
+
+
+
+
+
+
+
+
0.1C65
0.1C77
+
+
+
+
+5V
0.1C78
+
+
+
+
17 GND
10GND
1.0C53
1.0C89
1IN
8VCC
4VCC
IDT74FCT807CTSOU27
1.0C90
13
14
15
U17:D11
10
9
U17:C
11
10
9
U5:C
18O9
16O8
14O7
11
10
9
U18:C
13
14
15
U18:D
11
10
9
U6:C12
O6
11O5
11
10
9
U19:C
13
14
15
U19:D
11
10
9
U7:C9
O4
7O3
11
10
9
U20:C
13
14
15
U20:D
11
10
9
U8:C5
O2
3O1
13 GND
1.0C93
6GND
1.0C57
IDT74FCT807CTSOU29
1.0C94
4VCC
8VCC
1IN
18O9
16O8
11
10
9
U9:C
14O7
11
10
9
U21:C
13
14
15
U21:D
12O6
11
10
9
U10:C
11O5
11
10
9
U22:C
13
14
15
U22:D
9O4
11
10
9
U11:C
7O3
11
10
9
U23:C
13
14
15
U23:D
5O2
11
10
9
U12:C
3O1
13
14
15
U24:D11
10
9
U24:C
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU10:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU12:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU11:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU19:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU18:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU17:E
13
14
15
U1:D
13
14
15
U4:D
13
14
15
U3:D
13
14
15
U2:D
13
14
15
U5:D
13
14
15
U6:D
13
14
15
U7:D
13
14
15
U8:D
13
14
15
U9:D
13
14
15
U10:D
13
14
15
U11:D
13
14
15
U12:D
S2070001 SHEET 2 OF 2 V1
1.0C22
1.0C47
1.0C17
1.0C19
RF DRIVE 2
H8J3
H5J3
G8J3
G5J3
F8J3
F5J3
E8J3
E5J3
D8J3
D5J3
C8J3
C5J3
B8J3
B5J3
0.1C62 A8J3
A5J3
19O10H8J219
O10
H5J2
G8J2
G5J2
F8J2
F5J2
E8J2
E5J2
D8J2
D5J2
C8J2
C5J2
B8J2
B5J2
0.1C70A8J2
A5J2
H8J1
H5J1
G8J1
G5J1
F8J1
F5J1
E8J1
E5J1
D8J1
D5J1
C8J1
C5J1
B8J1
B5J1
A8J1
A5J1
1.0C21
1.0C45
1.0C46
1.0C23
1.0C24
1.0C48
1.0C18
1.0C42
1.0C43
19O10 H7J3
H4J3
G7J3
G4J3
F7J3
F4J3
E7J3
E4J3
0.1C61
0.1C73
D7J3
D4J3
C7J3
C4J3
0.1C74
B7J3
B4J3
A7J3
A4J3
H7J2
H4J2
G7J2
G4J2
F7J2
F4J2
E7J2
E4J2
0.1C81
0.1C69
D7J2
D4J2
C7J2
C4J2
0.1C82
B7J2
B4J2
A7J2
A4J2
H7J1
H4J1
G7J1
G4J1
F7J1
F4J1
E7J1
E4J1
D7J1
D4J1
C7J1
C4J1
B7J1
B4J1
A7J1
A4J1
1.0C41
7
6
5
U31:B
9
10
11
U31:C
4
1
3
2L1
Issue 3.3 2017-03-31 SD-22
Figure SD-22: NAPI154 PDM Distribution PWB (Sheet 1 of 2)
(-)
(-)
(+)
(-)
(+)
(-)
(+)
(+)
(-)(+)
(-)(+)
(-)(+)
(-)(+)
(-)
(-)
(+)
(-)
(+)
(-)
(+)
(+)
(-)(+)
(-)
(+)
(-)
(+)
(-)(+)
(-)
(-)
(+)
(-)
(+)
(-)
(+)
(+)
(-)(+)
(-)
(+)
(-)(+)
(-)
(+)
(-)
(-)
(+)
(-)
(+)
(-)
(+)
(+)
(-)(+)
(-)(+)
(-)(+)
(-)(+)
8
7
6
5
4
3
2
1 9
(-)
(+)
(-)
(+)
(-)(+)
(-)
(+)
(+)
(-)
(+)(-)
(+)
(-)
(+)
(-)
(-)
(-)
(+)
(-)
(+)
(-)
(+)
(+)
(+)(-)
(+)
(-)
(+)
(-)
(+)(-)
(-)
(-)
(+)
(-)
(+)
(-)
(+)
(+)
(+)
(-)
(+)
(-)
(+)(-)
(+)
(-)
(-)
(-)
(+)
(-)
(+)
(-)
(+)
(+)
(+)(-)
(+)
(-)
(+)
(-)
(+)(-)
DUMP
PDM 3
PDM 2
PDM 1
DUMP
PDM 3
PDM 2
PDM 1
DUMP
PDM 3
PDM 2
PDM 1
DUMP
PDM 3
PDM 2
PDM 1
24
23
22
21
20
19
18
17
H7J4
H4J4
H3J4
H1J4
G8J4
G5J4
G6J4
G2J4
F7J4
F4J4
F3J4
F1J4
E8J4
E5J4
E6J4
E2J4
D7J4
D4J4
D3J4
D1J4
C8J4
C5J4
C6J4
C2J4
B7J4
B4J4
B3J4
B1J4
A8J4
A5J4
A6J4
A2J4
(-)(+)
(-)
(+)
(-)(+)
(-)
(+)
(+)(-)
(+)(-)
(+)(-)
(+)(-)
(-)
(-)
(+)
(-)
(+)
(-)
(+)
(+)
(+)(-)
(+)
(-)
(+)
(-)
(+)(-)
(-)
(-)
(+)
(-)
(+)
(-)
(+)
(+)
(+)
(-)
(+)
(-)
(+)
(-)
(+)
(-)
(-)
(-)
(+)
(-)
(+)
(-)
(+)
(+)
(+)(-)
(+)(-)
(+)(-)
(+)(-)
40
39
38
37
36
35
34
33
DUMP
PDM 3
PDM 2
PDM 1
DUMP
PDM 3
PDM 2
PDM 1
DUMP
PDM 3
PDM 2
PDM 1
DUMP
PDM 3
PDM 2
PDM 1
H8J4
H5J4
H6J4
H2J4
G7J4
G4J4
G3J4
G1J4
F8J4
F6J4
F5J4
F2J4
E7J4
E4J4
D8J4
E1J4
E3J4
D5J4
D6J4
C7J4
D2J4
C4J4
C3J4
B8J4
C1J4
B5J4
B2J4
B6J4
A3J4
A1J4
A7J4
A4J4
H7J1
H4J1
H3J1
H1J1
G8J1
G5J1
G6J1
G2J1
F7J1
F4J1
F3J1
F1J1
E8J1
E5J1
E6J1
E2J1
D7J1
D4J1
D3J1
D1J1
C8J1
C5J1
C6J1
C2J1
B7J1
B4J1
B3J1
B1J1
A8J1
A5J1
A6J1
A2J1
MODULE
DUMP
PDM 3
PDM 2
PDM 1
MODULE
DUMP
PDM 3
PDM 2
PDM 1
MODULE
DUMP
PDM 3
PDM 2
PDM 1
MODULE
DUMP
PDM 3
PDM 2
PDM 1
DUMP_A
PDM_A3
PDM_A2
PDM_A1
DUMP_A
PDM_A3
PDM_A2
PDM_A1
DUMP_A
PDM_A3
PDM_A2
PDM_A1
DUMP_A
PDM_A3
PDM_A2
PDM_A1
(-)
(+)
(-)
H7J2
(+)
(-)
16H4J2
(+)
(-)
H3J2
(+)H1J2
(+)
(-)DUMP
G8J2
(+)(-)
15PDM 3
G5J2
(+)
(-)PDM 2
G6J2
(+)
(-)PDM 1
G2J2
(-)
(-)
(+)F7J2
(-)
(+) 14F4J2
(-)
(+)F3J2
(+)F1J2
(+)(-)
DUMPE8J2
(+)
(-)
13PDM 3
E5J2
(+)
(-)PDM 2
E6J2
(+)(-)
PDM 1E2J2
(-)
(-)
(+)D7J2
(-)
(+) 12D4J2
(-)
(+)D3J2
(+)D1J2
(+)
(-)DUMP
C8J2
(+)
(-)
11PDM 3
C5J2
(+)
(-)PDM 2
C6J2
(+)
(-)PDM 1
C2J2
(-)
(-)
(+)B7J2
(-)
(+) 10B4J2
(-)
(+)B3J2
(+)B1J2
(+)
(-)DUMP
A8J2
(+)
(-)PDM 3
A5J2
(+)
(-)PDM 2
A6J2
(+)(-)
PDM 1A2J2
H7J3
H4J3
H3J3
H1J3
G8J3
G5J3
G6J3
G2J3
F7J3
F4J3
F3J3
F1J3
E8J3
E5J3
E6J3
E2J3
D7J3
D4J3
D3J3
D1J3
C8J3
C5J3
C6J3
C2J3
B7J3
B4J3
B3J3
B1J3
A8J3
A5J3
A6J3
A2J3
MODULE
MODULE
MODULE
MODULE
DUMP_A
PDM_A3
PDM_A2
PDM_A1
DUMP_A
PDM_A3
PDM_A2
PDM_A1
DUMP_A
PDM_A3
PDM_A2
PDM_A1
DUMP_A
PDM_A3
PDM_A2
PDM_A1
32MODULE
DUMP
PDM 331
PDM 2
PDM 1
30MODULE
DUMP
PDM 329
PDM 2
PDM 1
28MODULE
DUMP
PDM 327
PDM 2
PDM 1
26MODULE
DUMP
PDM 325
PDM 2
PDM 1
DUMP_A
PDM_A3
PDM_A2
PDM_A1
DUMP_A
PDM_A3
PDM_A2
PDM_A1
DUMP_A
PDM_A3
PDM_A2
PDM_A1
DUMP_A
PDM_A3
PDM_A2
PDM_A1
(-)
(+)
(-)
H7J5
(+)
(-)
H4J5
(+)
(-)
H3J5
(+)H1J5
(+)DUMP
(-)G8J5
(+)PDM 3
(-)G5J5
(+)PDM 2
(-)G6J5
(+)PDM 1
(-)G2J5
(-)
(-)
(+)F7J5
(-)
(+)F4J5
(-)
(+)F3J5
(+)F1J5
(+)DUMP
(-)E8J5
(+)PDM 3
(-)E5J5
(+)PDM 2
(-)E6J5
(+)PDM 1
(-)E2J5
(-)
(-)
(+)D7J5
(-)
(+)D4J5
(-)
(+)D3J5
(+)D1J5
(+)DUMP
(-)C8J5
(+)PDM 3
(-)C5J5
(+)PDM 2
(-)C6J5
(+)PDM 1
(-)C2J5
(-)
(-)
(+)B7J5
(-)
(+)B4J5
(-)
(+)B3J5
(+)B1J5
(+)DUMP
(-)A8J5
(+)PDM 3
(-)A5J5
(+)PDM 2
(-)A6J5
(+)PDM 1
(-)A2J5
MODULE
MODULE
MODULE
MODULE
H2J1
H5J1
H6J1
H8J1
11
10
9
U12:C5
6
7
U12:B
G4J1
G3J1
G7J1
5
6
7
U13:B
11
10
9
U13:C
13
14
15
U13:D
F8J1
G1J1
F6J1
F5J111
10
9
U10:C
13
14
15
U10:D
E7J1
E4J1
F2J1
11
10
9
U11:C
13
14
15
U11:D
E3J1
E1J1
D8J1
D5J1
13
14
15
U8:D
3
2
1
U11:A
D6J1
D2J1
C7J1
13
14
15
U9:D
3
2
1
U8:A
C3J1
C1J1
B8J1
C4J1
3
2
1
U9:A
5
6
7
U9:B
B6J1
B5J1
B2J1
5
6
7
U6:B3
2
1
U6:A
A7J1
A4J1
A3J1
A1J1
11
10
9
U7:C5
6
7
U7:B3
2
1
U7:A
DUMP
PDM 3
PDM 2
PDM 1
MODULE
DUMP
PDM 3
PDM 2
PDM 1
MODULE
DUMP
PDM 3
PDM 2
PDM 1
DUMP
MODULE
PDM 3
PDM 2
PDM 1
MODULE
DUMP_B
PDM_B1
PDM_B2
PDM_B3
DUMP_B
PDM_B2
PDM_B3
PDM_B1
DUMP_B
PDM_B3
PDM_B1
PDM_B2
DUMP_B
PDM_B1
PDM_B2
PDM_B3
DUMP
PDM 3
PDM 2
PDM 1H2J2
H6J2
H5J2
H8J2
G3J2
G4J2
G7J2
DUMP
PDM 3
PDM 2
G1J2
F8J2
F5J2
F6J2
PDM 1F2J2
E7J2
E4J2
DUMP
PDM 3
E3J2
D8J2
E1J2
D5J2
PDM 2
PDM 1
D6J2
D2J2
C7J2
DUMP
C3J2
B8J2
C1J2
C4J2
PDM 3
PDM 2
PDM 1
B6J2
B2J2
B5J2
A4J2
A7J2
A1J2
A3J2
H6J3
H5J3
H8J3
H2J3
5
6
7
U28:B
11
10
9
U28:C
G3J3
G4J3
G7J311
10
9
U29:C5
6
7
U29:B
13
14
15
U29:D
F8J3
G1J3
F5J3
F6J3
13
14
15
U26:D11
10
9
U26:C
E7J3
E4J3
F2J3
13
14
15
U27:D11
10
9
U27:C
D5J3
E3J3
E1J3
D8J3
3
2
1
U27:A
13
14
15
U24:D
D2J3
C7J3
D6J3
13
14
15
U25:D
3
2
1
U24:A
C4J3
C3J3
C1J3
B8J3
5
6
7
U25:B3
2
1
U25:A
B6J3
B2J3
B5J3
3
2
1
U22:A
5
6
7
U22:B
A4J3
A7J3
A1J3
A3J33
2
1
U23:A
11
10
9
U23:C5
6
7
U23:B
MODULE
MODULE
MODULE
MODULE
DUMP_B
11
10
9
U36:C5
6
7
U36:B
PDM_B1
PDM_B2
PDM_B3
13
14
15
U37:D
5
6
7
U37:B
11
10
9
U37:C
13
14
15
U34:D11
10
9
U34:C
DUMP_B
PDM_B2
PDM_B3
13
14
15
U35:D11
10
9
U35:C
PDM_B1
13
14
15
U32:D
3
2
1
U35:A
DUMP_B
PDM_B3
13
14
15
U33:D
3
2
1
U32:A
PDM_B1
PDM_B2
DUMP_B
3
2
1
U33:A
5
6
7
U33:B
5
6
7
U30:B3
2
1
U30:A
PDM_B1
PDM_B2
PDM_B3
5
6
7
U31:B
11
10
9
U31:C
3
2
1
U31:A
DUMP
PDM 3
PDM 2
PDM 1
MODULE
DUMP
PDM 3
PDM 2
PDM 1
MODULE
DUMP
PDM 3
PDM 2
PDM 1
DUMP
MODULE
PDM 3
PDM 2
PDM 1
MODULE
DUMP_B
PDM_B1
PDM_B2
PDM_B3
DUMP_B
PDM_B2
PDM_B3
PDM_B1
DUMP_B
PDM_B3
PDM_B1
PDM_B2
DUMP_B
PDM_B1
PDM_B2
PDM_B3
DUMP
PDM 3
PDM 2
PDM 1H2J5
H8J5
H5J5
H6J5
G7J5
G4J5
G3J5
DUMP
PDM 3
PDM 2
F8J5
G1J5
F6J5
F5J5
PDM 1
E7J5
E4J5
F2J5
DUMP
PDM 3
E1J5
D8J5
E3J5
D5J5
PDM 2
PDM 1
D6J5
C7J5
D2J5
DUMP
C3J5
C1J5
B8J5
C4J5
PDM 3
PDM 2
PDM 1
B5J5
B2J5
B6J5
A3J5
A1J5
A7J5
A4J5
MODULE
MODULE
MODULE
MODULE
13
14
15
U12:D
5
6
7
U11:B
3
2
1
U10:A
5
6
7
U10:B
3
2
1
U13:A
3
2
1
U12:A
13
14
15
U7:D
13
14
15
U6:D11
10
9
U6:C
11
10
9
U9:C
5
6
7
U8:B
11
10
9
U8:C
13
14
15
U28:D
3
2
1
U26:A
5
6
7
U26:B
5
6
7
U27:B
3
2
1
U28:A
3
2
1
U29:A
11
10
9
U25:C
11
10
9
U22:C
13
14
15
U22:D
13
14
15
U23:D
5
6
7
U24:B
11
10
9
U24:C
13
14
15
U36:D
5
6
7
U34:B3
2
1
U34:A
5
6
7
U35:B
3
2
1
U36:A
3
2
1
U37:A
11
10
9
U30:C
13
14
15
U30:D
11
10
9
U33:C
13
14
15
U31:D
11
10
9
U32:C5
6
7
U32:B
DUMP_A
PDM_A3
PDM_A2
PDM_A1
DUMP_A
PDM_A3
PDM_A2
PDM_A1
DUMP_A
PDM_A3
PDM_A2
PDM_A1
DUMP_A
PDM_A3
PDM_A2
PDM_A1
MODULE
DUMP_A
PDM_A3
PDM_A2
PDM_A1
MODULE
DUMP_A
PDM_A3
PDM_A2
PDM_A1
MODULE
DUMP_A
PDM_A3
PDM_A2
PDM_A1
MODULE
DUMP_A
PDM_A3
PDM_A2
PDM_A1
DUMP_B
PDM_B1
PDM_B2
PDM_B3
S2070186 SHEET 1 OF 2 V1
DUMP_B
PDM_B2
PDM_B3
PDM_B1
DUMP_B
PDM_B3
PDM_B1
PDM_B2
DUMP_B
PDM_B1
PDM_B2
PDM_B3
5
6
7
U20:B
11
10
9
U20:C
DUMP_B
PDM_B1
PDM_B2
PDM_B3
MODULE
11
10
9
U21:C5
6
7
U21:B
13
14
15
U21:D
11
10
9
U18:C
13
14
15
U18:D
DUMP_B
PDM_B2
PDM_B3
MODULE
11
10
9
U19:C
13
14
15
U19:D
PDM_B1
DUMP_B13
14
15
U16:D
3
2
1
U19:A
PDM_B3
13
14
15
U17:D
3
2
1
U16:A
PDM_B1
PDM_B2
MODULE5
6
7
U17:B3
2
1
U17:A
DUMP_B
3
2
1
U14:A
5
6
7
U14:B
PDM_B1
PDM_B2
PDM_B3
MODULE
3
2
1
U15:A
5
6
7
U15:B
11
10
9
U15:C
5
6
7
U44:B
11
10
9
U44:C
11
10
9
U45:C5
6
7
U45:B
13
14
15
U45:D
13
14
15
U42:D11
10
9
U42:C
13
14
15
U43:D11
10
9
U43:C
3
2
1
U43:A
13
14
15
U40:D
3
2
1
U40:A
13
14
15
U41:D
3
2
1
U41:A
5
6
7
U41:B
5
6
7
U38:B3
2
1
U38:A
5
6
7
U39:B
11
10
9
U39:C
3
2
1
U39:A
13
14
15
U20:D
3
2
1
U18:A
5
6
7
U18:B
5
6
7
U19:B
3
2
1
U20:A
3
2
1
U21:A
13
14
15
U15:D
13
14
15
U14:D11
10
9
U14:C
11
10
9
U17:C
11
10
9
U16:C5
6
7
U16:B
13
14
15
U44:D
5
6
7
U43:B
5
6
7
U42:B3
2
1
U42:A
3
2
1
U44:A
3
2
1
U45:A
13
14
15
U39:D
5
6
7
U40:B
11
10
9
U40:C
11
10
9
U41:C
11
10
9
U38:C
13
14
15
U38:D
Issue 3.3 2017-03-31 SD-23
Figure SD-23: NAPI154 PDM Distribution PWB (Sheet 2 of 2)
1.0C79
1.0C77
1.0C69
1.0C67
1.0C59
1.0C57
0.1C98
0.1C96
0.1C88
0.1C86
(-)
(+)
(-)
(+)
(-)
(+)
(-)
(+)
(-)
(+)
(-)
(+)
(-)
(+)
(-)
(+)
1.0C81
1.0C83
1.0C73
1.0C75
1.0C63
1.0C65
1.0C61
1.0C55
1.0C51
1.0C53
0.1C92
0.1C94
TP1
GND
TP2 TP3
1.0C71
0.1C90
+5V
0.1C48
0.1C46
+5V
+5V
+5V
0.1C38
0.1C36
+5V
+5V
+5V
0.1C28
0.1C26
+5V
+5V
+5V
+5V
+5V
0.1C80
0.1C78
+5V
+5V
+5V
0.1C70
0.1C68
+5V
+5V
+5V
0.1C60
0.1C58
+5V
+5V
+5V
+5V
+5V
+5V
+5V
+5V
DUMP
GROUP B
PDM 1
PDM 3
4 J9
0.1C103
1.0C104
2 J9
5 J9
R150.0
5 J7
4 J7
+5V
R120.0
3 J7
R90.0
8 J6
7 J6
+5V
5 J6
4 J6
6 J6
3 J6
+5V
2 J6
1 J6
+5V
0.1C8
0.1C6
0.1C5
1SELECT
PDM_A3
PDM_A2
DUMP_A
PDM_A1
DUMP_B
8GND
15OE
PDM_B1
+5V
0.1C50
+5V
0.1C44
0.1C40
0.1C42
+5V
+5V
0.1C30
0.1C32
+5V
+5V
0.1C24
0.1C13
0.1C15
1.0C14
1.0C16
0.1C82
0.1C84
+5V
+5V
0.1C74
0.1C76
+5V
+5V
0.1C64
0.1C66
+5V
0.1C62
+5V
0.1C56
0.1C52
0.1C54
0.1C100
0.1C102
+5V
+5V
+5V
+5V
GND
PDM 3
PDM 2
DUMP
GROUP A
PDM 1
PDM 2
3 J9
L131 J9
8 J7
6 J9
R160.0
7 J7
+5V
475R68
R140.0
6 J7
475R64
R110.0
475R63
4
1
3
2L6
2 J7
1 J7
+5V
475R73
R100.0
4
1
3
2L5
R70.0
R80.0
475R67
4
1
3
2L4
R50.0
R60.0
+5V
475R62
4
1
3
2L3
R20.0
R30.0
475R61
+5V
82.5R51
82.5R52
475R77
0.1C7
475R31
82.5R49
82.5R50
475R30
82.5R47
82.5R48
15
14
13
U2:D
475R29
82.5R45
82.5R46
9
10
11
U2:C
0.1C3
82.5R43
82.5R44
475R76
7
6
5
U1:B
0.1C2
475R26
82.5R39
82.5R40
1
2
3
U1:A
0.1C1
475R25
82.5R37
82.5R38
15
14
13
U1:D
0.1C20
0.1C22
DUMP_A
910
11
1
0PDM_A1
PDM_A3
PDM_A2
PDM_B3
C190.1
16VCC +5V
PDM_B2
0.1C34
0.1C72
+5V
4
1
3
2L8
4
1
3
2L7
R130.0
R10.0
R40.0
475R71
4
1
3
2L1
4
1
3
2L2
7
6
5
U2:B
1
2
3
U2:A
0.1C4
475R27
82.5R41
82.5R42
9
10
11
U1:C
43
2
1
0
1.0C47
1.0C45
1.0C37
1.0C35
1.0C27
1.0C25
S2070186 SHEET 2 OF 2 V1
1.0C97
1.0C95
1.0C87
1.0C85
10C105
3 PHASE/6 PHASE
1.0C49
4ENABLE
16 VCC
12ENABLE
8GNDDS26C31TM
U19:E
4ENABLE
16 VCC
12ENABLE
8GNDDS26C31TM
U36:E
1.0C43
4 ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU17:E
4 ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU34:E
1.0C39
1.0C41
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU15:E
4ENABLE
16 VCC
12ENABLE
8GNDDS26C31TM
U14:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU32:E
4ENABLE
16 VCC
12ENABLE
8GNDDS26C31TM
U13:E
4 ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU12:E
4ENABLE
16 VCC
12ENABLE
8GNDDS26C31TM
U30:E
4 ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU29:E
1.0C29
1.0C31
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU10:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU27:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU8:E
4ENABLE
16 VCC
12ENABLE
8GNDDS26C31TM
U25:E
1.0C23
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU6:E
4 ENABLE
16 VCC
12ENABLE
8GNDDS26C31TM
U23:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU20:E
4 ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU21:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C32ATMU1:E
4 ENABLE
16VCC
12ENABLE
8GND
DS26C32ATMU2:E
1.0C99
1.0C101
4ENABLE
16 VCC
12ENABLE
8GNDDS26C31TM
U45:E
4 ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU43:E
1.0C91
1.0C93
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU41:E
GND
4ENABLE
16 VCC
12ENABLE
8GNDDS26C31TM
U39:E
4 ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU38:E
+5V
1213
14
1
0
1.0C33
4 ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU11:E
4 ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU18:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU16:E
4 ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU33:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU28:E
4ENABLE
16 VCC
12ENABLE
8GNDDS26C31TM
U31:E
4ENABLE
16 VCC
12ENABLE
8GNDDS26C31TM
U35:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU7:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU9:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU26:E
4 ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU22:E
4ENABLE
16 VCC
12ENABLE
8GNDDS26C31TM
U24:E
1.0C89
4ENABLE
16 VCC
12ENABLE
8GNDDS26C31TM
U40:E
4 ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU42:E
4ENABLE
16 VCC
12ENABLE
8GNDDS26C31TM
U44:E
4ENABLE
16VCC
12ENABLE
8GND
DS26C31TMU37:E
76
5
1
0
SN74HC257PWU4
Issue 3.3 2017-03-31 SD-24
Figure SD-24: NAP39A RF Power Module and NAPA34A Modulator/Power Amplifier PWB (Sheet 1 of 2)
(-)1
(+)
2
(-)
(+)
(-)
(+)
B+
(-)
(+)
1.0C50
475R10
0.1C31
+5V
475R4
1.0C9
0.1C14
0.1C93
K
1IN
+5V
S
S
S
S
T4
T3
L15
T2
T1
TO
(-)
(+)
(+)
(-)
1.0C136
0.1C32
475R11
475R19
+5V
475R18
82.5R22
475R1
82.5R2
82.5R23
475R12
R2133.2K
R2033.2K
R2533.2K
R1230.0
R350.0
1.0C29
1.0C24
1.0C20
0.1C1
J
1.0C57
S
5W5.0
R113
1.0C79
*
3320R50
C1081.0
C951.0
475R13
0.1C30
82.5R3
R260.0
R128
0.05W5.0
R114
SHEET 2
21 P1
20 P1
26 P1
RF DRIVE
23 P1
SHEET 2
5 J1Mod 3
Mod 2
1 J1
81 P1
77 P1
73 P172 P1
GND70 P1
88 P187 P1
85 P1
82 P180 P1
76 P1
8 J1ENABLE -
7 J1
0.1C49
0.1C44
475R99
0.1C33
0.1C18
0.1C11
+5V
S2070206 SHEET 1 OF 2 V4
+5V-A
0.1C96
82.5R97
10.0KR36
+5V
1.0C99
7VS-
3VL
8OUTD
9OUTC
U2EL7457
13OUTA
+5V
+5V
1VCC
3GND
U5ZXGD3002E6
2IN1
1 VCC 3GND
1 VCC 3GND
U3ZXGD3002E6
2IN1
6SOURCE
+5V
4 GND
8VCC
+5V-A
+5V-A
4 2
U26:A
4 2
U24:A
CR161N4448HWS
R7822.1
0.054C117
63P1
61P160P1
LOAD58P1
56P155P1
53P1
51P1
43 P1
41 P140 P1
38 P1
36 P135 P1
33 P1
31 P1
0.054C116
CR141N4448HWS
5.1V
CR111SMB5918B
0.001C59
SHEET 2
FROM
22 P1
RF DRIVE
25 P1
24 P1
19 P1
FROM
4 J1
6 J1
3 J1
2 J1Mod 1
79 P1
75 P1
71 P1
69 P1
86 P1
84 P1
78 P1
# MODULE
2W10
R1260.1C135
475R96
0.1C34
0.1C7
+5V
82.5R16
0.1C6
82.5R5
+5V
0.1C12
82.5R17
+5V
+15V-A
10.0KR109
0.1C92
10.0KR106
82.5R100
1
2
3
U27:A
10C5
35V1.0C15
1.0C10
0.1C8
10.0KR34
10.0KR32
10.0KR7
1000R24
+15V
+15V
+15V
+15V
17GND
2VL
6IND
4GND
12OUTB
1.0C28
0.1C27
10C25
35V
1.0C23
0.1C22
10.0KR122
10C21
35V
10.0KR33
1.0C19
0.1C17
10.0KR28
10C16
35V
1.0C2
1.0C107
2W10
R112
4SINK
5 IN2 6SOURCE
2IN1
5IN2
6SOURCE
U4ZXGD3002E6 4SINK
5IN2
4SINK
MURA160T3CR40
2W20
R40
MURA160T3CR38
IXFH30N50PQ13
IXFH30N50PQ12
IXFH30N50PQ11
3
6
4U32:A
1
6
4U31:A
155μHL14
155μHL13
155μHL12
0.1C139
0.1C140
C1041.0
C1021.0
R10510.0K
25.5μHL10
0.15C55
C1131.0
CR181N4448HWS
C1151.0
0.47C134
4750R125
0.47C133
4750R124
0.1C78
CR9STTH1212G
C1271.0
C1261.0
C1221.0
C1231.0
C1241.0
C1181.0
C1191.0
C1201.0
*
57P1
59P1
62P1
64P1
52P1
54P1
37 P1
39 P1
42 P1
44 P1
34 P1
32 P1
1000R117
C1121.0
1000R115
CR131N4448HWS
*
C1141.0
*
R483320
R591.00M
R511.00M
5W5.0
R110
R46121
R47121
+5V
C620.17
8
3
2
U18:A
3320R49
R631.00M
28.7KR69
R681.00M
R531.00M
28.7KR66
R521.00M
DC_CURRENT
MODULATION
B+_SAMPLE
82.5R6
475R98
2W10
R39
475R92
B
7
6
5
U27:B
2W20
R41
2W20
R42
MURA160T3CR39
0.1C137
DS1100Z-100U30
25.5μHL11
R10810.0K
1
2
4T
1
2
4T
5.1V
CR121SMB5918B
5.1V
CR171SMB5918B
C1211.0
C1251.0
E
D
5.1V
CR151SMB5918B
3
4
4T
3
4
4T
5W5.0
R111
+5V
82.5R104
+15V-A11
VH
5INC
10C144
35V
ON BACKPLANE BOARDDO NOT CONNECT PIN 76
1.0C111
1.0C103
+5V-A
+15V-A
0.15C41
+15V-A
0.15C40
+15V-A
1000R1185100nS
660nS
240nS
CR20CSD10060A
+5V
PARTS ARE INSTALLED ON THE MODULATOR/RF AMPLIFIER PWB (A1).* Q7, Q8, Q9 & Q10 ARE INSTALLED ON THE RF POWER MODULE. ALL OTHER
0.001C60
42
U29:A
42
U23:A
PA_VOLTS_SAMPLE
#MODULE_ENABLE-
1.0C138
+15V
#RF_DRIVE_ENABLE+
82.5R103
L9
10C147
35V
10 VH
16OE
14 VS+
#MOD_DRIVE_ENABLE+
L2
1
2
3
U1:A
L3
9
10
11
U1:C 1INB
L1
10C145
35V
15
14
13
U1:D 15 INA
10C146
35V
1.0C105
5EN
1 VCC
3GND
6GNDIXDD614YI
U26:B
5 EN
1 VCC
3GND
6GNDIXDD614YI
U29:B
5 EN
1VCC
3GND
6GND
IXDD614YIU23:B
0.1C106
4ENABLE
16 VCC
12ENABLE
8GNDDS26C32ATM
U27:E
1000R44
1000R43
1000R45
0.15C51
0.1C101
0.1C58
1GND
2GND
5VCC U32:B
NC7SZ57P6X
5 LE
1 VCC+
4VCC-
6GNDTL3016ID
U18:B
380nS
1000R116
720nS Q10APT50m50JFLL
CR21CSD10060A
Q9APT50m50JFLL
CR19CSD10060A
Q8APT50m50JFLL
Q7APT50m50JFLL
1
2
4U25:A
1.00MR58
1.00MR57
1.00MR67
RF_DRIVE_LEVEL
#RF_DRIVE_FAIL+
L8
A
L4
7
6
5
U1:B
5 EN
1VCC
3GND
6GND
IXDD614YIU24:B
4ENABLE
16 VCC
12ENABLE
8GNDDS26C32ATM
U1:E
3
4
4T
3
4
4T
2GND5
VCC3
VCCU31:B
NC7SZ57P6X
5VCC
3GNDU25:B
74V1G86STR
1
2
4T
1
2
4T
F
C
3VOUT
4I+
1 VCC
5I-
2GND
U17ACS756KCA-050B-PFF
Issue 3.3 2017-03-31 SD-25
Figure SD-25: NAP39A RF Power Module and NAPA34A Modulator/Power Amplifier PWB (Sheet 2 of 2)
0.1C89
+5V
0.1C83
RXD
T0
T1
INT0
ADC1
ADC2
ADC4
ADC0
AIN0
AIN1
RESET
SCK
PC.5
PB.0
PB.1
XTAL1
XTAL2
+5V
0.1C66
R1 *
R76121
2W20
R107
+5V
0.1C97
0.1C109
1.0C67
0.1C80
TXD
ADC3
INT1
MISO
MOSI
PB2
+5V
+5V +5V
+5V
+5V
TX/RX 11 P1
TX/RX 10 P1
1 P1
+15V 3 P1
H
G
FAN TACH (B) 17 P1
FAN TACH (A)
16 P1
FROM
OVER CURRENT TEST 14 P1
MODULATION
DC_CURRENT
+5V
0.1C26
+5V
0.1C69
2RE
5GND
1RO
+5V
+5V
30
1720
AREF
4VCC
2
3GND
28
26
24
1425
1323
10
117
8
29
10.0KR8
10.0KR90
10.0KR9
0.1C90
GND6J2
+5V2J2
SCK3J2
8P1
6P1
SHEET 2TO
# RESET -
9 P1
12 P1
4 P1
2 P1
15 P1
18 P1
SHEET 1
13 P1
FROM SHEET 1
10μHL6
1.0C76
1.0C77
R94121
1N4448HWSCR27
1N4448HWSCR28
RF_DRIVE_LEVEL
B+_SAMPLE
MURS120T3CR29
330C129
25V
+5V
R54100K
R74100K
0.1C88
1.0C70
1.0C110
0.1C72
2
3
1U21:A
5
6
7U21:B
R75100K
R9510.0K CR10
1N4448HWS 1W
R91270
R300.0
3DE
4DI
DS36C278TMU20
L5
L7
1000R77
8250R82
+5V
12
13
14U21:D
10.0KR64
10.0KR72
0.1C68
+15V1.0C74
10.0KR61
27.4KR930.01
C91
10.0KR850.1
C86
3320R84
31
15
16
18AVCC
21GND
6VCC
22ADC7
5GND9
12
19ADC6
32
ATmega168-20AIU22
27
1
+5V
10.0KR81
+15V
10.0KR89
18pFC87
+5V
2W20
R71
0.1C94
0.1C13
MISO
MOSI4J2
1J2
2W20
R70
7P1
5P1
5J2
t°
10K @ 25C, 30 @ 105C
10.0KR88
R7910.0K
3320R60
3320R86
221R14
+15V
10.0KR65
221R15
2W20
R56
2W20
R55
7DO/RI
6DO/RI
1.0C81
+5V
FAULT
#MOD_DRIVE_ENABLE+10.0KR102
0.1C61
# RF RELAY OPEN -
# RF RELAY CLOSE -
2210R101
F13A
8 VCC
1.0C100
1.0C98
1IN
4GND
3OUTL7805ABD2T
U28+15V
0.1C82
0.1C75
1500R87
1.0C65
Q1IRLL110
Q2IRLL110
0.1C84
MODULE POWERG DS1:BDS1:AR
1.0C71
1.0C73
Q3IRLL110
Q4IRLL110
#RF_DRIVE_ENABLE+
Q5IRLL110
Q6IRLL110
+5V 4 VDD 11GNDU21:ETLV2374ID
Y110-14MHz
10.0KR62
9
10
8U21:C
10.0KR73
18pFC85
10.0KR83
S2070206 SHEET 2 OF 2 V4
ARE INSTALLED ON THE MODULATOR/RF AMPLIFIER PWB (A1).
PA_VOLTS_SAMPLE
* R1 IS INSTALLED ON THE RF POWER MODULE. ALL OTHER PARTS
#RF_DRIVE_FAIL+
#MODULE_ENABLE-
NX100 Troubleshooting Manual Mechanical Drawings
Issue 3.3 2017-03-31 Page 6-1
Section 6: Mechanical Drawings
This section contains mechanical drawings for assemblies of the transmitter. Dimensional drawings may be included. Refer to Table 6.1 on page 6-2 for an itemized list.
Assembly detail drawings for assemblies and modules that have separate manuals are not included. Refer to the appropriate maintenance manual for the assembly detail of these assemblies.
Identifying mechanical drawings
Each mechanical drawing in this section is identified by a number that is both the figure number and the page number. The numbers are assigned sequentially and are prefixed by the letters MD. Drawings in this section are listed in Table 6.1 on page 6-2.
Content of mechanical drawings
Mechanical drawings are illustrations that depict the location of electrical components and show assembly outline detail. Dimensional information is included, where appropriate.
When a module or assembly is the subject of its own assembly detail drawing, and it is also shown in a higher level assembly, the detail depicted in the higher level assembly may have minor differences from the module or assembly actually installed. In this case, always refer to the assembly detail drawing of the module or assembly for detailed information.
Locating a part or assembly on a mechanical drawing
1. When a part or assembly is assigned a reference designation (e.g., A2A1 or A2A1R1), refer to the family trees in Section 2, “Parts Lists” on page 2-1. Follow the family tree branches to the block that contains the desired reference designation and Nautel nomenclature (e.g., NAPA34A Modulator/Power Amplifier PWB). Note the reference designations and Nautel nomenclatures of all higher assemblies in the path.Example: A20 NAP39A RF Power Module > A20A1 NAPA34A Modulator/Power Amplifier PWB.
2. Refer to Table 6.1 on page 6-2. Use the reference designation and Nautel nomenclature toidentify the appropriate mechanical drawing.Example: The NAPA34A Modulator/Power Amplifier PWB is shown on MD-16 andMD-17.
NX100 Troubleshooting Manual Mechanical Drawings
Page 6-2 Issue 3.3 2017-03-31
3. If necessary, refer to the referenced figure (e.g., MD-16 and MD-17) in the mechanicaldrawings at the end of this section and locate the next, lower-level assembly. Then, repeatthis procedure until the desired part or assembly is found.
Table 6.1: List of Mechanical Drawings
Figure # TitleMD-1
MD-2
MD-3
MD-4
MD-5
MD-6
MD-7
MD-8
MD-9
MD-10
MD-11
MD-12
MD-13
MD-14
MD-15
MD-16
MD-17
MD-18
MD-19
MD-20
MD-21
MD-22
NX100 Transmitter (Front and Right-Side Views) NX100
Transmitter (Rear and Left-Side Views) NAH57C and
NAH57C/01 RF Combiner Back Plane NAPI95A Power
Module Interface PWB
NAPI95A/01 Power Module Interface PWB
NAE96C/01 Control/Exciter Panel
NAPC160B/01 Control/Interface PWB
NAPE78A/01 Digital AM Exciter PWB
NAPI106 Remote Interface PWB
NAPX46 GPS Sync PWB (Optional)
NAPI151 USB Audio Interface PWB (Optional)
NAPI152A Rack Interface PWB
NAPI98 RF Drive Distribution PWB
NAPI154 PDM Drive Distribution PWB
NAX243A B+ Distribution Assembly
NAP39A RF Power Module
NAPA34A Modulator/Power Amplifier PWB (Front View)
NAPA34A Modulator/Power Amplifier PWB (Rear View)
Fan Tray Assembly (207-8133)
Voltage Probe (207-6111-02)
Current Probe (207-6213-04)
NAFP106B Directional Coupler
Issue 3.3 2017-03-31 MD-1
Figure MD-1: NX100 Transmitter (Front and Right-Side Views)
POWER TRANSFORMER CABINET T1 NOT SHOWN
CONTROL/EXCITERPANEL
A11
ANTENNA GROUNDSWITCH
A74
AC CABLEDUCT BRACKET
OPTIONAL INTAKE DUCT
EXHAUST DUCT
RF POWER MODULESA20 - A59
FAN TRAY ASSEMBLIES(A60 - A64)
PDM DRIVEDISTRIBUTION PWB
A17
FRONT DOOR (A65) AND SIDEPANEL REMOVED FOR CLARITY
RECTIFIER ASSEMBLYA72
RF OUTPUT
B+ DISTRIBUTION ASSEMBLYA19
CURRENT PROBEA67
Issue 3.3 2017-03-31 MD-2
Figure MD-2: NX100 Transmitter (Rear and Left-Side Views)
POWER TRANSFORMER CABINET T1 NOT SHOWN
RF VOLTAGEPROBE
A66
BOTTOM BACK PLANE RF COMBINED ASSEMBLIES (A9, A7, A5, A3, A1)VIEWED FROM REAR
STATIONREFERENCE
GROUND
ANTENNA GROUND SWITCHA74
RACK INTERFACE PWB (A15)RF DRIVE DISTRIBUTION PWB (A16)BOTH UNDERNEATH
LOW VOLTAGEPOWER SUPPLIES(U5 - U7)
B+ DISTRIBUTION ASSEMBLYA18
TOP BACK PLANE RFCOMBINED ASSEMBLIES (A10, A8, A6, A4, A2)VIEWED FROM REAR
ARC DETECTOR PWB A71
RECTIFIERASSEMBLY
A72
LOW VOLTAGEPOWER SUPPLIES
(U3, U4)
R13
K1
U9,U10,U11U12,U13
C1/R1,C2/R2,C3/R3C4/R4,C5/R5,C6/R6C7/R7,C8/R8,C9/R9
C10/R10,C11/R11,C12/R12
Issue 3.3 2017-03-31 MD-3
Figure MD-3: NAH57C and NAH57C/01 RF Combiner Back Plane
A1Power ModuleInterface PWB
A2 & A3TransformerAssemblies
Issue 3.3 2017-03-31 MD-4
Figure MD-4: NAPI95A Power Module Interface PWB
Issue 3.3 2017-03-31 MD-5
Figure MD-5: NAPI95A/01 Power Module Interface PWB
Issue 3.3 2017-03-31 MD-6
Figure MD-6: NAE96C/01 Control/Exciter Panel
A1 A4
A2 A3
A7
Control/Interface PWB
RemoteInterface PWB
Exgine PWB(optional)
Digital AMExciter PWB (A)
Digital AMExciter PWB (B)
A5
GPS Sync PWB(optional)
USB Audio Interface PWB (optional)
A6
Issue 3.3 2017-03-31 MD-7
Figure MD-7: NAPC160B/01 Control/Interface PWB
R55
R35
2
R106
CR
21
L9
R185
R283
R277
R271
CR1
CR2
R6
C7
C6
C5
C1
7C
15
C25
C21
C41
C38
C39
C36
C56
C55
CR
13R
61
C77
C7
4
C84
C8
5
C10
5C
269
C272
CR
79
R11
1R
100
CR
20
L10
CR
23 C
R22
C12
9
C14
2
R17
1
C15
2
R18
4
C15
5
R18
7
CR
45C
R44
R18
6
R19
8R
193
R19
1R
194
R19
5R
200
R19
2R
190
C16
7
C17
1C
R47
C17
4C
173
C17
9
R20
8
R213
C18
3
C190
R2
36
R25
6
R284
R274
R278
R272
CR
76C
R72
CR
73C
R70
CR
71C
R67
CR
66C
R65
CR
64C
R61
R30
8R
303
R30
2R
305
R30
4R
306
R29
9R
298
R29
7R
296
R30
0R
293
R29
4C18
C1
6
C23
C27
C42
C40
C68
C76
C78 C9
3
C27
0
R11
6
CR
27
CR
25
CR
28C
R30
C13
5
R17
2 C16
2
C1
70C
169
R25
4
R273
R279
CR
74C
R75
CR
63C
R62
CR
69C
R68
R29
5R
301
R30
7
R2R1
C3C19 R11
C9
C10
R7
R31
R33R32
R28R29
R25R26R27
TP7
TP6
TP4
TP3
R16C37
C35
TP8
C47 R23
C49
C50R19 R20
C66
C65
R59 C72
C73R67
R60
R42R41
C63C62
R64R65R66
R39R38
C61C60
C58C59
R53R52
C75
R48R49
R45
C57
CR18
CR15
CR16
R72
TP47
R82
TP13 C91
TP14R75
C108C113R
92
C10
0
R98
C117
R96R95
R88R89
R94 R105
C102
R103C109
R101
C132
C126
C127
R127
C121
R137R118
R139
R124
R13
3
R136
C123C130
C131
C122
C140
C146
R174R147
R173CR33
C138CR36
R165R166
R158
R163
R157
C151C144
R357
C277
R160
R169
R177
R178
R159 R168 C147
R153
C141R155
R150C134
R182
R189
TP36
Y2
C160
R151
R215
R216CR50
C182
R206
R207
R214R202 R209
R204R205
C176
R238
C193
CR54 CR56
C197R235
R234
C204
R222 R233
R232
C196R230
R229C191
C194
R227
C200
C199
C198
R239
R226R224
R285
R281R282
C221
R276
R264
C218
R262C217
R261C216
R259R269
C215R270
R258R267
R268
R257C213
C227
C226C222
R325
R324
R322
R321
R319
R318
R313
C231 C267C265
R348
R310R291C229
C264R346
C263 R344
C261
C260 R341
R342
R338
R339
C257
C258
R336
R335C254
C255
R332
R333
C251
C252
R329
R330C249
C248
C268
C4 U13C20
C26
U4
C22
U2
C13
U11
C11
U9
C8
R10
U7
U6R8
R9
TP46
C48
U20
C45
R30
R24
TP5
TP2
C43
L4C
52
U19
L3
TP1
B+
C51
L2
U2
3U
22R43
R40
C64
R57
R56
R58 C71
R63
R54
R51R50
U27
R46R47
R44
CR
14
CR17
U25
R6
2
R69
C86
C83
R77R79
C88
R76
C92
C90
R81U32
C89C87
C82 R74
T5
TP19
C99
C11
2
R140
U37
C97C116
R1
08
C103
C106
C107C104
U36
L7
C110
R104
U39
C273
U38
C271
R102
RT
4
C11
4
R99
R11
2
CR
78R
351
C128
R126
Q1C118
U43
R123
R125
R134R135
U45
C124
R13
0
R13
1
R13
2
C274 U87
R12
1
R122
L8 L11
R12
9
L12
T1 T2
R175
C15
4
R152
CR37
R164
C15
3
CR35
CR38
Y1
C137
R162
R154
C136C139
R161
U50
R17
0
R359
R167
RT1
L13
R156
R14
9R145
R18
3
CR
42
R19
9R
197
C16
5C
166
CR46
CR
43
R19
6
C16
4
U57
R18
8
TP32
C161
C15
6
R181
RT3
134
7 8 10
T3
R210
CR51CR49
S1 S2
DS3DS2DS1
TP20R146
R203
C17
5
C177
R21
1
C18
0
C18
1
CR55
C192
R23
7
U64
R24
0
S4
R231
DS6DS5
C202
C195
U65
L15
C201
TP39
6 5 4
23 1
S5
R223R225
R25
5
R286
C22
5
C212 R280
U70
R275
TP42
C22
4
R265
R263
U69
C223
C220
R266
R260
C214
U74
C219
U72
U73
R328
C24
7
R323
R326
C24
5C
244
C24
1C
243
C24
2
R316
R317
C23
6C
237
C23
5C
238
C23
9
R320
R311
R312
R314
C23
2C
233
C230
R292
R309 R345
R347
C262
R337
R334
C256
C253
C259 R340
R343
R331C250
C14
C12
U10
U12
C24
C28
U5
U3
TP12
C46
C44
U18
U26
U24
U21
C70
C69C67
R83
U35
U33
U31
TP17
TP16
R93
C101
U86
GO
IU44
C125
R117
CR
26
CR
24
CR
29
U48 C145
C14
3
CR
32
CR34 CR39
C16
3
U56
R20
1
U58
U66
CR58
U71
R315
C23
4
R327
RT
2
C24
6C
240
1
J24
L17
R78
1
J23
R15C34
C54
TP10
TP9
CR8R70CR10
CR11
CR5
R35R36
R14C33
DS16DS17C32
DS12DS13
DS9DS8
C81 R73C53
C2C1CR19
C79
C30 R68
C29
R12
R4
TP52
U49
C158
C98
R90
R114
C95
C133
TP51TP50
R107
R138R115
R113
R120C150R142
R119
TP15 C149
CR40
R179
CR31
1
E1 TP18R349
CR77
CR80
TP43
C178 R219
R218
R251R250CR52CR48
C187
R217 R241
C189C207
R249
R246R247
R244R245
R290C205
R242 R289
R252 R288R287
C210L16
C209
R220
C185
C266
T7
TP11
R34
U16
CR9
CR6
CR4
CR7
R37
CR12
U14
U29
DS14DS15
DS18
C80
DS10DS11
R71
R13
U1
C31
R5
L6
U55
CR41
C157
C159
R110
U41
C119R91
TP49
TP48
J251
C120R80
R85
C115
U51
U54
R144
R143
R141
C148
S7
R350
U40
U4
2
U47
R176
R18
0
R361
1
J20
R253
U81
U8
0
CR57CR53
C184 C203
C208
TP40
S6S3
R221
DS7DS4
R248
U77
U78
L14C172
C228
U61
C206
R243
U75
54321
A B C D E
GRID1
TP38
U8
4
CR59
C211
CR60
C168
U62
C188C186
E31
U15
U17
L1
U28
U30
CR3 U8
1
J2
A
B
(UPPER)
(LOWER)
J3
U46
1
J26
C96
C94
U52
U53
+
LS1C111
U34
1
J27
1
J5
+ BT1 U85
U82
U59
U63
U67
U68
U7
6U
79
TP44
U8
3
U60
J7 J8
J10 J11
1
J16
1
J18 B(LOWER)
A(UPPER)
J22
4 3 1
107 8
T8
J211
L5
1
1
1
D C
1
F E
1
1
H G
1
B A
1
(LO
WE
R)
(UP
PE
R)
(LO
WE
R)
(UP
PE
R)
(LOW
ER
)(L
OW
ER
)
(UP
PE
R)
(UP
PE
R)
J15
TB1
1
J1
1
J13
J12
1
J19
1
J17
1
1
1
D C
1
F E
1
1
H G
1
B A
1
(LOW
ER
)
(UP
PE
R)
(LOW
ER
)
(UP
PE
R)
(LOW
ER
)(LO
WE
R)
(UP
PE
R)
(UP
PE
R)
J14
1
2
3
4
6
7
8
B C E F H I K L N O
5
M2070311 V1
U/SIDE
A D G J M P
GND
7
5
2
9
6
-5V
GND
54
23
9
GND4
1
8
3
87
GND
GND
+5V
-15V
+3.3V
+15V
GND
PDM (B)
GND
GND
16
PDM (A)
J16
HF
DF
DB
ROW B D F
VSWR
12 11 9 78
PDM
6 45 3 12
3V
BH
PD
M D
RIV
ER
F D
RIV
E
ROW A C E
ENBL
GND
RE
SE
TS
BC
+1
5V
- + - +
+5V
INT
MA
IN/S
TD
BY
GE
C
LOWER
EC
A
EXCITER A
H
(TO AUI)
20%30%
60%70%
(TO AUI)
FILTER
RESET
COMBINERCONTROL
10
INHIBIT SAMPLE
B - GPS
MINOR MAJOR
SAMPLE
J15
DE
BU
G (
RS
-23
2)
A
UPPER
BOARD
G
G
STREAMING BUS
10%
40%50%
80%90%
SERIALBUS
RF
DSBL
SBC
GN
D GND+15VGND
LOCAL/
LOCAL REMOTE RF ON
REMOTE RF ON/OFF
+15VRF MONITOR
A - EXGINE
PDM INHBTALARM ALARM
RESETDECREASEPOWER
RE
FLE
CT
ED
10 MHz SYNC
EXT
BALANCED
CO
NT
RO
LLE
R
RE
MO
TE
IN
PU
TS
RE
MO
TE
OU
TP
UT
S
NAPC160
100%110%
FWD PWR METER
INTLKEXT CONT
FORWARD
RF MONITOR
SYSTEM INTERLOCK
SUPPLYREMOTE
SER.
(% OF MAX)
RACK DISTRIBUTION
EXCITER B
THRESHOLD
ALARM
RF OFF
POWERINCREASE
AES 1AES 2ANALOG AUDIO
CONTROL/INTERFACE
Issue 3.3 2017-03-31 MD-8
Figure MD-8: NAPE78A/01 Digital AM Exciter PWB
C162
C3
C1
C31
C50
C4
8
C67
C9
2
C1
02
C109
C11
3
C123
C12
9
C1
33
C13
5
C13
8
C14
2
C14
4
C14
8
C14
1C
143
C16
4C
163
C15
2C
158
C15
6C
155
C15
1C
150
C17
7C
179
C17
6C
174
C17
2C
173
C19
3
C19
4C
197
C20
1
C21
4
C4
C2
R1
7R
12
C1
3
R2
4R
22
R3
0C
9
R3
2R
8C
26
R3
3C
28
C34
C30
R4
1R
37
L10
TP5
C3
3
C3
9R
49R
48
C49
C5
1R
61
R6
3R
64
R6
5
R6
7
C52
R81
R79
R80
R8
5
C56
C8
2
C93
C96
C13
0
C13
4
C17
8C
170
C19
5
R11
C4
6 R57
C59 TP13
C106C103
C91
C81
C84 C88
C101
C100
C98C97
C122C121
C126C125
C132C120
C165C137
C15
7
C159C154
C153
C189
C18
4
C205C207
C188
C192C204C187
C190 C202C185
C216
C211
C218C212
DS3DS2 R14
R15
R2
R6
C6 C12
L8C20
C14R5R1
C3
6
C19
C27
R39R38 R43
C32
R40R36
R51
R60
R58
C44R56
R54
L11
R75R74
U22
C6
1
R82
R77
C58
R98C69 C77
R96R95
R94
R92
R91
L14
L15
C76
R89
C6
5
C78
L16C72C71R87
C105
C85
C8
6
C9
4C90
C89
C80
C83C87
C99
C124
C119
C117
C116
C1
15
C118 C131
C128
C13
6
C13
9
C14
6C
147
C16
9C
167
C168
C14
5
C160
C16
1
C175
C17
1
C140
C200
C18
3
C19
9
C22
C191C203C186
C21
0
C219
C21
5
C213
DS4
DS1 R13
R16
C8
C7
U2
R10 C15
Y1
C18
U1
L3L2
R2
0C
17
T1
L5L6
L4L1
C1
6
R3
1
C37
C35
C40
U10
TP3
R4
TP2U9
U11
R2
5
R3
4R
35
C2
9
R4
2
T3
R59
U17
U1
8L12
C43R55
R6
2
R53
U15
C6
2C
60
R83
TP9
E11
R71
R7
0
U25
R78
R76
U24 U28
1
J6
R6
8
R69
C5
5
R86U21
Y2
TP8
C53
C54
R84
C57
Y3
R97
R93
R90
J7
1
C68
TP12
GND
OUT IN
U37
C6
6
TP14C74R8
8
C64
C75
C70L13
C95
C11
4
C12
7
C149
C16
6
C19
6C
198
TP1
TP4
J4
1
R50
R5
2 J5
1
TP7C45U26
U23
U3
6
C7
3 TP15
U16
C107C104
C79
C206
C209
R72R73
C63C42
U32
R26
C38 TP10R23R21
R66
C108 C112
C110
C111
C18
2C
181
C18
0
C208
C217
U1
4 S1
U3
4
U33
U3
U30
U4
U13
TP11
C21R18 TP6
U6
R45
T2 U19
U31
U2
9
U7
U27
U5
U12
C41U20
U35
U8
1
J1
1
J3
1
J2
J6-2
C220
-E -B A B D E
J2-19
R19
-F -D -C
1
2
4
5
M2070020 V1
C F
3
-A
+2.5V
GND
+5V-D
+15V
-15V
+3.3V-D GND
+1.2V
+3.3V-A
+1.8V
+5V-A
GND
GND
RS-232
TE
ST
DE
BU
G
FP
GA
JT
AG
SER.
BOOTLOADER
NORMAL
MODE
RESET
DS
P J
TA
G
PROGRAM
NAPE78DIGITAL AM EXCITER
Issue 3.3 2017-03-31 MD-9
Figure MD-9: NAPI106 Remote Interface PWB
Issue 3.3 2017-03-31 MD-10
Figure MD-10: NAPX46 GPS Sync PWB (Optional)
C22
R11
C1
R1
R4
TP2
C19
R5
R8
C21
C20
C26
R13
R16
R18
C14
R2
C18
TP4
C25
R12
C10
C7
C8
C5C4
C15
R7
C2 C17
R3
C43
R17R14
Q2
C39
C36C37C38
C33C34
C28
TP10
C31
R27
C45C30
L1C32
R10
R15
R24DS4
R23DS3
C6
C9
C12C11
Q1
C13
C16
U3
R6
C3
U7
TP7
U9
U8C42
C40
U10
R20
C41
R19
TP8
C35
C27
U11
U12
Y1
R28
TP5
TP6
C44C29
R25
DS6
R26DS5
TP9
R21
R22DS2
DS1
1E
1
TP1U4
U6
U1
U2
1E
2
R9
R29R30
C23
C24
TP3
1J3
1 J4
U5
J2
1
J1
B
1
2
3
4
6
5
A
M2130004 V3
+5V
10MHz
+3.3V
GND
1PPS
1PPS
GND
1 kHz
CA
LN
OR
M
JTA
G
5V
+5V
+3.3V
LOCK
PR
OG
/
GP
S A
NT
ISP
3.3
V
CPU
AN
T V
OL
TS
SER.
ACQUIRE
GPS SYNCNAPX46
UNLOCK
Issue 3.3 2017-03-31 MD-11
Figure MD-11: NAPI151 USB Audio Interface PWB (Optional)
C4
R3
R1
0R
9
C8
C6
C2
R11
L1 C14
C12
C7
DS
1
C3
C1
C5
R2
R1
R1
2
C1
1
T2
C13
C10
J1
T1
R7
R5
Y1
U2
R6
C9
U1
R4
R8
1
J2
B
1
2
A
M2060292 V1
+5V
SER.NAPI151USB AUDIO INTERFACE
Issue 3.3 2017-03-31 MD-12
Figure MD-12: NAPI152A Rack Interface PWB
R5
R20
2
C173
C184
C1
82
R2
42
C18
5R
190
R2
10
C1
91
C1
1C
18
C12
C1
44R
17
R1
4
R28
C4
1
R4
4
R4
5
R193
C48
R20
4
C6
0R
62
C6
2R
65
R8
0
C6
7R
88
R90
C7
7
TP27
R9
2
R94
C8
6C
89R
101
C8
5
R10
2R
98
R11
4C
96
R1
13
R11
0
C97
R13
4C
114
C11
6R
130
C10
6
C11
5
R12
4R
123
R12
1C
107
C11
7R
142
R1
28
C160
R197
R14
7C
171
R1
48
R15
6
R154
R2
22
C12
4
C17
2
C1
83
R166
R1
68
C3
7
C133
R169
R25
6
R18
7
C1 C
2
R21
8
R22
1 C19
4
U7
R52
R61
R81 C6
8 R10
4C
82
C1
00L1
C9
9
C9
8
C1
62
C1
61
C11
1R
126
C1
64
C1
65
R13
6
C16
7
R14
0R
145
C1
20
R23
0
C20
3
C17
7
C27
RT
19
C21
6
C5
R7
R2
20
C143
C25R21
TP4
TP50
R12
C14
C16
R15
C35
R32R33R34
C32
R31C29
R43R42
TP58
C39 C43 C45
C38R39
TP10
R37R36
R35
R203
R188
R19
4
R77
R79R78C56
R86R87
C61C63
C69R58 C74
R64C59
TP24 R76C155
C156
TP
22
R72R73
C152
R68R69
C149
R53
R120C112
R117
C92
C110
R115R108
R107C101R111C
91
C87
R100
TP64
C78C84
TP61 TP32TP33
R9
9
TP46TP45
TP
42
R138
TP41
R2
32
TP77
TP
68
R165 R167
TP70
TP76TP48
R172R171 TP74
R240
R265R266
C211R235
R175
R174
R25
9
U1
C1
42
R1
R200
C6
C4
R6C3
CR1
U3
2
R2
61R
262
L3
R192
C9
C1
5
R9
TP51TP3
R11
C1
3
TP
1C
17
RT21
R135
TP7
C33
C34
AKCR4
A KCR3
TP6R258
C44C46
C181R38
TP
11
TP13
TP14
TP56
TP
15
TP57
C147
U10
R180
C4
2
R47
R41
C80
R96
TP31
R85
C64
R59 R91
C70
C71
R60
TP
23
TP
21
TP20R67
R70R71
R74R75
C153
C151
C150
C148
C7
6
U12TP26
C53
C6
6Q1 R8
2R
84
C72
R89
R105
C103C94
R119
R116C108
R1
09R
112
R118
C10
9
R14
3
C88
TP63
C83
R1
31
TP34TP36
R1
29
C7
9
C90
CR
8C
102
TP62U18
R12
5U20
CR
25
C10
4
R195
R19
6
C159
C93
R12
2TP29
R9
3C
81
C11
8
TP47R161
TP44
C11
9
R14
6
R1
51R14
9
R15
0
U24
R1
27
R1
41
C1
70
C169
R13
7
C168
U23
R14
4
TP66
RT17
RT18R152
R1
53
U3
3
C2
01
R2
63R
264
R19
9
TP69
R157
TP67
R164 C174
C175C129
L5
TP72
C131C130 U
29
R177
C135
R170TP73
TP
75
U34
C209
R176C137
R24
8C
214
C2
13
R2
49C215
R247
C136R173
R26
8
R2
60
R18
6
R4
C7
C19
3
R21
5
C19
0
Y1
C28
1
J16
U8
R2
6
C36
R18
1
R48
R51
R63
R66
R83
C73
C154
C65
U13U19 C
163
C1
05
R13
3
R10
6
AK
CR
7
C95TP37 R
160
C1
66
C1
22
C12
3R
139
C121
R1
55
R22
6
C20
4
C20
0
CR
23
RT
15
RT
16R
233
U27
RT
12
R1
0
C23
C26
U2
8
KA C
R16
AKC
R17
U3
5
R2
67
E1
E2
+V
OU
T
CM
N
-VO
UT
INP
UT
+
INP
UT
-
U11
C196
RT13
RT14
CR22C55
RT10 C54
RT9R24R23 C30
C31
RT7 R30
TP18
RT6R46
TP16
RT5C58
RT2
RT1
TP5 TP8
C24R182TP53TP52
R19
K A GQ3
R158R162
R159R205
C125C126
R97
C158R95
TP35 TP39
TP59
TP38
TP65
R19
8
C212
C179
C134
R179
C195
U3
1C
145
RT11
K A GQ2 R56
R57
C51
RT4
RT8
TP55
R22
TP
17
C57
RT3
CR2
+C8
U5
U6
TP
25
R5
4
C146
R132 TP54
L4
R206
R207
TP71
R163
C128
C157
U17
TP60U15
CR5
TP40TP43
TP28
U21
C11
3
U16
C210
R243
R244
+
C132
C178
R178
R2
53
C52+
C10
54321
A B C D E
GRID1
7 56 4
21
3
U2
A1 K A2
K
U3
C2
2
TP19
C47
1
J11
+V
OU
T
CM
N
-VO
UT
INP
UT
+
INP
UT
-
U22
+V
OU
T
CM
N
-VO
UT
INP
UT
+
INP
UT
-
U25
C17
6
U26
C75
TP
30
AK
CR
6
C180
AK
CR
15
TP49
1
J13
CR14
RT
20
1
J15
1
J1
U3
0
5
4 1
8
T1
1
J3
+
C127
1
J14
1
J6
7 56 4
21
3
U4
1 2 3 4 5 6 7 8
OPEN
S1
1
J5
1
J8
1
J12
1
J10
+V
OU
T
CM
N
-VO
UT
INP
UT
+
INP
UT
-
U14
1
J7
1
J9
1
J4
1
J2
1
2
3
4
6
7
8
9
B C E F H I K L N O
5
10
A D G J M P
11
M2070168 V2
GND
23
7
54
6
65
89
1110
14
10
GND
4
0
3DATA
7
1312
ADDRESS
1
GND
2
GND
+5V
2 3 5 6 8FA
NS
CT
RL
RA
CK
CT
RL
RA
CK
LAS
T R
AC
K
RACK INTERFACE
1
OPEN
4 7
NX
25
FA
NS
AC
NEXT RACK
SER.NAPI152
POWERSUPPLY
PO
WE
R S
UP
PL
YP
DM
DR
IVE
LEGEND FOR S1
CONTROL/INTERFACE
RF DRIVE
Issue 3.3 2017-03-31 MD-13
Figure MD-13: NAPI98 RF Drive Distribution PWB
Issue 3.3 2017-03-31 MD-14
Figure MD-14: NAPI154 PDM Drive Distribution PWB
C16
C14
C13
R68
R64
C19
R62
R67
R77
R76
C15
R51L8 C8
R49C7
R29
L5
R46
R44
R27 R42
R26L2 R40
R25C1
R38
C34C30
C32C28
C27
C38
C36
C35
C46
C43
C44
C54
C51
C52
C62C58
C60
C59C55
C56
C70
C68
C67
C78C74
C72
C71
C76
C75
C86C82
C79
C84C80
C83
C90
C87
C88
C98
C95
C96
C105
C104
1
J6
R50
R52
L7
L6 R48
R47C6R30
R31
L3
L1
L4
R41
R43
R45
C4
C5
C2
C3
R39
R37
C22
U4
TP1
U9
C29 C37
U1
3
U1
7
C45
U2
1
C53
TP2
U2
3
U2
5
C61C57
U2
9
C69
U3
1
C73 C77
U3
5
U3
7
C85C81
U3
9
C89 C97
U4
3
C103
1
J7
R63
R61
C20
R73
R71
U8
U12
U16
U20
U22
U24
U28
U30
U34
U36
U38
U42
1
J9
C26
R15R16
C31R12
C24
C23
R9R10
R6
R4R3
C66C50C42
C39 C63
C64C48C40
C47
C94
C91
C92
C102
C100
C99
C33
U2
U7
R14
R11
R13
C25
U1
1
R8
R5
R7
R1R2
U1
U2
7
C65
U1
9
U1
5
C49C41
U3
3
C93
U4
1
TP3
C101
U4
5
U6
U10
1 1 1 1
G
1
(LOWER)
(UPPER)H
(UPPER)F
1
E(LOWER)(LOWER)
C
(UPPER)DB
(UPPER)
A(LOWER)
1 1
J2
U26
U18
U14
A(LOWER)
(UPPER)B
C(LOWER)
(UPPER)D
E(LOWER)
(UPPER)F H
(UPPER)
G(LOWER)
11
11
1
11
1
J4
U32
U40
L13
U44
1
(LOWER)A
(UPPER)B
1
1
(LOWER)C
(UPPER)D
1
1 1
(LOWER)G
(LOWER)E
1
(UPPER)F
1
(UPPER)H
J1A
(LOWER)
B(UPPER)
(LOWER)C
(UPPER)D F
(UPPER)
E(LOWER)
G(LOWER)
(UPPER)H
1
11
11
11
1
J3A
B D
C E
F
G
H(UPPER)
(LOWER)(LOWER)
(UPPER)
(LOWER)
(UPPER)
(LOWER)
(UPPER)
1 1 1 1
1111
J5
B C E F H I K L N O
1
2
3
4
A
M2070187 V1
D G J M P
GND
GND
GND
SER.
PDM DRIVE DISTRIBUTIONNAPI154
Issue 3.3 2017-03-31 MD-15
Figure MD-15: NAX243A B+ Distribution Assembly
Issue 3.3 2017-03-31 MD-16
Figure MD-16: NAP39A RF Power Module
Q7
Q8
Q9
Q10
A1
MODULATOR / POWERAMPLIFIER PWB
CUTAWAY FROM A1 TO SHOWLOCATION / ORIENTATION
OF FETS Q7 TO Q10
Issue 3.3 2017-03-31 MD-17
Figure MD-17: NAPA34A Modulator/Power Amplifier PWB (Front View)
R4
3
R67
R66
R105
C2
R3
C7
R12
R10
R18
C31
C27
C29
C24
U4C
8C
14
R28
R44
R45
C80
R75
R72
C74
R74
R68
R69
C85
R83
L7
R88
R10
7
R128
L8
C34
C140
C97
C11
1
CR
17C
R15
R11
8
R2
R11 R
22
C18
R35
C15
C19
C17
R78
R87
C96
R10
4
R100
C10
3
R4 R13
R19
C1
R1 C11
L1
C6
R9
R122
R39
J
C59R48
C60C70
C58R61R62
R47
R49C61 C68
R64
R56
C65
R51
R53
R52
R89R76
CR28
C86R86
R91
CR10R90R84
C139C101
C138
R82
R77
C76
C109
C107
C126
C122
C118
C32
C12
L4L2
R17
U1
R23
R6
C30L3
GR
DS1
R8R
14ncS G
DQ1
R30C26
U5
C28
CR40
R12
3
R33
C22
C23
CR39
C9
R26
U3
R41
R40
C44 C49
C50
C57C69
U2
0
R46C67
C62R50
ncG S
DQ3 C
71R
65
R60
C66
R55
R54
R57
R59
R58
R63
C91
H
G
C8
9
C87
C84
C94
R94
G nc S
DQ6
Y1
R93
L5
C88
C83 C
90
R81
R85 R95
D
G nc SQ5
D
G nc SQ4
C13
5
C137
C13
6
R126
C93
U25
U30
R92
R96
C82
C81
L6
C7
8C
77
C98
C110
OUTIN
GND
U28
C104
C10
5
U2
7
C102
C106
R112
C100
C108
C99
R110
C11
3
C11
2
CR18 R116
R11
7
R115
C121
C123
C124
C125
C127
C119
F1
F1
R16
R1
5
ncS G
DQ2
1
J1
R5
C5
C16
C20
C25
C10 U2
C13
3
C13
4 U1
8
C92
R9
7R
101
C79
R98 U29
R113
R10
3
C120
C55
2
88
P1
C13
C147
C144
R7
R25
R20R21
R102
C75R125
R124
R71
R79C72
R99
L9
R108
C95
CR11
R24
1
J2
C41
C146
C145
R34
C21
R32
R36
K R42CR38
C51
R73 C12
9
CR27
CR29
A
(n/c)
CR
9
C73
R109
R70
U21
R106
U32U31
C33
CR16
C11
7
CR12
C11
6
R111
CR13
C40
L15
23
4
1
5
U17
U26
U24
U23
U22
CR14
4
2
1
3
T2
4 2
13
T3
C115
C114
2
1
3
4T4
4
2
1
3
T1
R114
S
D
S
D
G
D
S
G
S
S
Q7
B C E F H I K L
S
G
S
G
S
D
Q10
Q9
Q8
N
1
2
3
4
6
A
M2070207 V2
D G
FRONT
J M
5
NAPA34
ON THIS ASSEMBLY
CAUTION!
SER.
MODULATOR/POWER AMPLIFIER
HIGH VOLTAGE PRESENT
Issue 3.3 2017-03-31 MD-18
Figure MD-18: NAPA34A Modulator/Power Amplifier PWB (Rear View)
C
DE
CR
21K
AC
R20
KA
GD
SQ
13
GD
SQ
12
CR
19K
A
87
1
F
A
3
4
1
2
4
3
1
2
4
3
1
2
4
3
1
2
7
6
12
1
L10
6
127
1
L11
GD
SQ
11
12
16
7
L12
B
16
712
L13
1
7 12
6
L14
D
S
G
S
S
S
D
S
D
G
S
D
S
S
CA
BLE
3
Q8
Q7
G
CABLE 1
M2070208 V1
Q10
Q9
G
CABLE 2
REAR
P1
Issue 3.3 2017-03-31 MD-19
Figure MD-19: Fan Tray Assembly (207-8133)
Issue 3.3 2017-03-31 MD-20
Figure MD-20: Voltage Probe (207-6111-02)
J1
C1
C2
E1
Issue 3.3 2017-03-31 MD-21
Figure MD-21: Current Probe (207-6213-04)
Issue 3.3 2017-03-31 MD-22
Figure MD-22: NAFP106B Directional Coupler
A1 DETAIL
NX100 Troubleshooting Manual List of terms
Issue 3.3 2017-03-31 Page 7-1
Section 7: List of terms
This section defines some of the terms that are used in Nautel documentation.
ADC. Analog to Digital Converter.
AES-EBU. Audio Engineering Society/European Broadcasting Union (AES/EBU) is the name of a digital audio transfer standard. The AES/EBU digital interface is usually implemented using 3-pin XLR connectors (the same type connector used in professional microphones). One cable carries both left and right-channel audio data to the receiving device.
B+. The high voltage dc generated by the transmitter’s ac power supply for use within the transmitter. The B+ voltage is used to supply the transmitter’s modulators and other transmitter circuitry.
Cutback. A reduction in RF output power, caused by a total power limit fault or the occurrence of three shutbacks within a five second period.
DAC. Digital to Analog Converter.
DAM. Dynamic Amplitude Modulation.
DCC. Dynamic Carrier Control.
DRM. Digital Radio Mondiale. A set of digital audio broadcasting technologies designed to work existing AM radio channels.
DSP. Digital Signal Processing.
FPGA. Field Programmable Gate Array.
HD Radio. HD Radio is another term for In Band On Channel (IBOC) technology. HD Radio is a trademark of iBiquity Digital Corporation.
IBOC. Nautel In-Band-On-Channel technology provides high quality digital audio over existing AM radio channels.
IPM. Incidental Phase Modulation
Latching alarm. An alarm that, while active, keeps the transmitter in an ‘RF inhibited’ state. This type of alarm (e.g., High SWR Shutdown) require a reset - locally or remotely - to attempt to restore transmitter operation.
NX100 Troubleshooting Manual List of terms
Page 7-2 Issue 3.3 2017-03-31
NE IBOC. Nautel’s In-Band-On-Channel signal generator. See IBOC. Required for NX series IBOC installations.
PDM. Pulse Duration Modulation.
Preset. A setting that controls power level, active exciter, and power scheduler status on a time-of-day and date basis. Exciters can be configured on a preset for a specific operating mode (for example, Exciter A - conventional AM, and Exciter B - IBOC). The NX100 allows you to pre-program multiple presets.
Shutback. A complete loss of RF output power, caused by any one of a variety of faults, including high VSWR, low B+ voltage, high RF current, RF drive failure, external interlock or spark gap.
Surge protection board. An electrical panel that protects equipment from electrical surges in the ac power supply, antenna or site ground caused by lightning strikes.
VSWR. Voltage standing wave ratio. This is an expression of the ratio of forward voltage to reverse voltage on the feedline and antenna system. An ideal VSWR of 1:1 provides maximum transmitter-antenna efficiency.
NX100 TROUBLESHOOTING MANUAL
Document: NHB-NX100-TRB
Issue: 3.3 2017-03-31
Nautel Limited10089 Peggy’s Cove RoadHackett’s Cove, NS Canada B3Z 3J4
Toll Free: +1.877.6NAUTEL (662.8835) (Canada & USA only) or
Phone: +1.902.823.3900 orFax: +1.902.823.3183
Nautel Inc. 201 Target Industrial Circle Bangor, Maine USA 04401
Phone: +1.207.947.8200 Fax: +1.207.947.3693
Customer Service (24-hour support) +1.877.628.8353 (Canada & USA only)+1.902.823.5100 (International)
Email: [email protected]: www.nautel.com
© Copyright 2017 NAUTEL. All rights reserved.