NV Geforce Graphics Card Manual en V1.0

7/31/2019 NV Geforce Graphics Card Manual en V1.0

1/28

Statement:

This manual is the intellectual property of Foxconn, Foxconn reserves

the right to make changes at any time without notice.

Trademark:

All trademarks are the property of their respective owners.

Version:

Users Manual V1.0 for GeForce series Graphics Card.

P/N: 91-181G880010-02

Symbol description:

Note: refers to important information that can help you to use graphics

card better.

Attention: indicates that it may damage hardware , and tells you how to

avoid such problems.

Warning: means that a potential risk of property damage or physical

injury exists. WEEE: The use of the symbol indicates that this product may not betreated as household waste. By ensuring this product is disposed of

correctly, you will help prevent negative consequences for the environ-

ment and human health, which could otherwise be cause by inappro-

priate waste handing of this product.

For more detailed information about recycling of this product, please

contact your local city office, your household waste disposal service or

the shop where you purchased the product.

FCC: This product has passed FCC certification.

CE: This product has passed CE certification.


2/28

More information:Please visit Foxconns website, for more information about this prodduct.

http://www.foxconnchannel.com/

The Americas-Technical Support

City: Fullerton

Tel: +1.714.871.9968 x206

E-mail: Please use the service/ Online Contact form on

http://www.foxconnchannel.com/en-us/service/online.aspx

Address: 458 E. Lambert Road, Fullerton, CA (USA)

Postcode: 92835

Netherlands

City: Eindhoven

Tel: +31.40.290.2250

E-mail: [email protected]

Address: Esp 131, 5633AA Eindhoven The Netherlands

Postcode: 5633AA

Italy

City: Milano

Tel: +39.02.36529300


Address: Centro Direzionale Milanofiori Strada 6, Palazzo N2, 5 Piano

20089 Rozzano (MI), Italy

Postcode: 20089

Russia

City: Moscow

Tel: +7.095.710.8900


Address: 119435,Moscow,Bolshoy Savvinsky Per., 9, office 1001Postcode: 119435
http://www.foxconnchannel.com/http://www.foxconnchannel.com/en-us/service/online.aspxmailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]://www.foxconnchannel.com/en-us/service/online.aspxhttp://www.foxconnchannel.com/


3/28

Package:

Thanks for your purchasing Foxconns GeForce series Graphics Card. Please

check the package; if there are missing or damaged items, please contact your

distributor as soon as possible.

vGraphics Card

vDVI-I to D_Sub(Optional)

vHDTV Cable(Optional)

vUSB Game Pad (Optional)

vUsers Manual

vDriver CDvUtility CD(RestoreIT V7.0 and VirtualDrivePro V10.0) (Optional)

vS-Video Cable (Optional)

vGraphics Card Power cable(Optional)


4/28

Installation Instructions

Connect Graphics Card ............................................................................. 2

Install the Graphics Card ...................................................................... 4

Install SLITM System .............................................................................. 5

Driver CD Introduction

Driver CD Content ................................................................................. 8

Install Graphics Card Driver ................................................................ 9

Install Microsoft DirectX 9.0 ................................................................ 10

Install Foxware ......................................................................................11

Table of Contents

Chapter 11

Chapter 22


Disp lay Properties Pages ................................................................... 14

33Chapter


Foxware setting .................................................................................... 21

34Chapter


5/28

Ensure that the computer power supply is turned off before insert

ing or removing Graphics Card. Failure to switch off the computer

power supply may result in serious damage to your system or

Graphics Card.

We cannot guarantee that your system will operate normally while

over-clocked. Normal operation depends on the over-clock capacity

of your device.

Warning:

Attention:

Note:

The pictures of objects used in this manual are just for your reference.


6/28


7/28

1

Chapter 2 Driver CD Introduction

Read through this Users manual carefully before installing your

Graphics Card. Please makesure your system goes smoothly.

This chapter includes the following information:

v Connect Graphics Card

v Install the Graphics Card

v Install SLITM System

Chapter11


8/28

Chapter 1 Installation Instructions

2

Connect Graphics Card

Pb/COMP OUT

S-VID OUT

Y OUT

Pb/COMP OUT

Pr OUT

Projector

DVI Output

VGA Output

NTSC/PAL TV

HDTV

LCD Monitor

Pb/COMP OUT

S-VID OUT

Y OUT

Pb/COMP OUT

Pr OUT

Projector

DVI Output

Graphics Card

NTSC/PAL TV

HDTV

LCD Monitor


9/28


3

Pb/COMP OUT

S-VID OUT

Y OUT

Pb/COMP OUT

Pr OUT

Projector

VGA Output

VGA Output

NTSC/PAL TV

HDTV

LCD Monitor

Note:

You can connect the RCA/AV/Pr interface to Pb/COMP OUT.


10/28


4

Step1. Shut down your computer and unplug the system power cord.

Step2. Take the case cover off. If there is any Graphics Card, please remove them.

Step3. Take the Graphics Card out from the static-proof bag and install it on the

motherboard carefully

Step4. Put on the case cover and connect the monitor or TV cables to the rear

Video output port of the Graphics Card.

Step5. Reboot your PC.

Install the Graphics Card

1. Be sure to unplug the AC power cord before adding or removing Graph-

ics Cards otherwise your motherboard or the Graphics Cards might be

seriously damaged.

2. Ensure you insert the Graphics Card in the correct slot. PCI-Express

cards differ from AGP cards, Make sure that you locate the correct slot,

otherwise you could cause damage to your PC.

3.To avoid damage from static electricity, make sure that you have dis-

charge the static electricity before installation.

4. Some Graphics Cards have an additional power connect; if your Graph-

ics Card has one, make sure that the connect is connected with the power

supply, or the Graphics Card may not work properly!

Attention:


11/28


5

Install SLITM

SystemStep1. Install two Graphics Cards on a SLI ready motherboard, please makesure

that the Graphics Cards are the same type.

Step2. Connect Graphics Card power connector and system power supply connector.

Graphics Card

Power Cable


12/28


6

Step 3. Install the SLI Bridge Board to the goldfingers on each Graphics Card. Makesure that the connector is firm in place.


13/28


7

The Driver CD that cames with the Graphics Card contains

several drivers and useful software that enhance the Graph-

ics Card features.


v Driver CD content

v Install Graphics Card Driver

v Install Microsoft DirectX 9.0

v Install Foxware

Chapter

22


14/28


8

1. Driver

A. VGA Driver [32 bit for Win2K/XP] B. VGA Driver [64 bit for WinXP64]

C. VGA Driver [for Vista x86] D. VGA Driver [for Vista x64]

E. USB Game Pad Driver

2. Utility

A. Foxware B. Microsoft DirectX 9.0

C. Adobe Acrobat Reader

3. Manual

Click here to review user manual content.

Driver CD contentThis Graphics Card comes with one Driver CD. To begin CD, simply insert the

CD into CD-ROM driver. The CD will automatically displays the main menu screen

as below.

ClickDriver button

ClickUtility button


15/28

9


Install Graphics Card Driver

1. Click the VGA Driver you want to install on the Driver page, The Installation

Program runs automatically. Click Next button to go on the installation.

2. Choose Yes, I want to restart my computer now, then click the Finish button

to restart computer, the driver installation is completed.


16/28


10

Install Microsoft DirectX 9.0

1. Click Microsoft DirectX 9.0 to install Microsoft DirectX 9.0 on the Utility page.

Choose I accept the agreement, then click Next button to go on the installation.

2. Click the Next button to go on the installation.

3. Click Finish to restart your computer, the Microsoft DirectX 9.0 installation is

completed.


17/28

11


Install Foxware

1. Click Foxware on Utility page to install Foxware. Click Next button to go on

the installation.

2. To install to this folder, click Next to continue the installation.

3. Click the Finish button, Setup has finished installing Foxware on your

computer.


18/28


12

After the Graphics Card driver is installed completely, an ICON will showson Notification Area. Click this icon to open the control panel.

Click this icon

You can set

display param-

eters from here


19/28

13

Chapter 3 Display Properties Setting

This chapter shows how to set Display Properities Pages.


v Display Properties Pages

Chapter

33


20/28


14

Display Properties Pages

Right-click any where on Desktop and select Properties. The Display Properties

dialog box shows.

To set the Screen refresh rate, click the Advanced button, select Monitor tab, then

click Refresh Frequency pull-down menu and select the refresh rate you want .


21/28

15


To start the NVDIA Control panel, click the GeForce XXXX tab, then click Start

the NVDIA Control Panel button.

Once NVDIA Control panel is launched , three category choices are available; 3D

Settings, display and Video&Television.


22/28


16

3D Setting

3D Settings is where you change the various game settings. There are two sub-

categories in this category, Appearance and Performance. Appearance allows

you to adjust image settings with preview and manage 3D settings;The Perfor-

mance gears the settings to highest performance.

SLI multi-GPU Setting (Optional)

To use SLI multi-GPU Setting, you must have installed two Foxconn Graphics

Cards on a SLI ready motherboard, and makesure the Graphics Cards are the

same type.

Choose

Enable SLI Technology

, then SLI function is effective.

Note:

NVIDIA SLI Technology only supports W indows XP or above Operating System.


23/28

17


Adjust Desktop Color Settings

Changing settings like Brightness, Digital Vibrance, Contrast, Image Sharpen-

ing and Gamma is done in the adjust color settings.

DisplayThe Display category gives you options: Run display optimization wizard, move

screen position, change resolution attributes, adjust desktop color settings,

rotate display, and manage custom timings. The display optimization wizard

takes you through a series of menus to automatically set your displays.


24/28


18

Change Resolution Attributes

You can change the monitor resolution and refresh rate in this page.

Video &Television

You can change Video and Television setting items from this page.


25/28

19


Change the Signal or HD FormatYou can change the signal format to use for your standard television(HDTV) as

well as change the country specfic signal, or the HDTV display format if you are

using an HDTV.


26/28


20

This chapter will introduce how to use attached software.


v Foxware

Chapter

44


27/28

Chapter 4 Directions for bundled software

Foxware setting

Foxware have 3 pages, each page allows user to,

Information: to display the Graphics Card and software information.

Frequency: to display and adjudge Graphics Card core and memory

clock.

Temperature: to monitor current GPU temperature. It can set a warning

temperature, when the GPU temperature over the warning

temperature, program will alert with beeper or shutdown.

Information

This page display the graphics card and software informaiton.

Current Core clock

Current Memory Clock

GPU Temperature

Graphics Card and

soft ware information


28/28

Chapter 4 Directions for bundled software

FrequencyThis page can display and adjudge Graphics Card core and memory clock.

Temperature

This page can monitor current GPU temperature. It can set a warning temperature,

when the GPU temperature over the warning temperature, program will alert with

beeper or shutdown.

Load default colck

Apply the change

Apply clock settings at

Windows Startup

Increase 1 MHzCurrent Memory clock

Click on this bar to adjust clock roughy

Setting Memory clock

Decrease 1 MHzSetting Core clock

Increase 1 MHz

Decrease 1 MHz

Click on this bar to adjust clock roughy

GPU Temperature Warning temperatureAdjust waring temperature

Temperature display unit

setting can set to degree C

or degree F

Checked for shutdown or alert by beeper,

when current temperature reach warning

temperature

Apply the change

Documents

NV Geforce Graphics Card Manual en V1.0