Nuto H SeriesPremium Quality Anti-wear Hydraulic Oils

Product DescriptionExxon Nuto H Series oils are premium quality anti-wear hydraulic oils intended for industrial and mobile serviceapplications where anti-wear lubricants are required. They are formulated with high quality base oils and a selectadditive system that results in products that provide many desirable features to improve and prolong equipmentlife. Nuto H Series oils are designed to provide good performance in a range of hydraulic components used insystems subjected to moderate to severe operating conditions. Their high level oxidation and chemical stabilityhelps control deposit formation and reduces the potential for sluggish system operation and valve sticking. Theyprovide long oil/filter life and optimum equipment protection reducing both maintenance and product disposalcosts. They provide good protection against rust and corrosion in high humidity operations or where low levelsof moisture are unavoidable. Nuto H Series oils separate water readily and have good air release properties.These products meet the performance requirements of a wide range of hydraulic system and component OEMs.

Features and BenefitsThe Nuto H Series hydraulic oils help reduce the potential for wear and corrosion, particularly where water ormoisture is present. Their excellent oxidation resistance and chemical stability allow extension of oil and filterchange intervals. Their high level of anti-wear properties result in exceptional equipment performance that notonly results in fewer breakdowns but helps improve production capacity. Their good demulsibility characteristicspermit the oils to work well in systems contaminated with small amounts of water yet readily separate largeamounts of water.

The Nuto H Series oils offer the following benefits:

• Excellent anti-wear performance reducing pump wear and leading to long pump life• Reduction of sludge and deposit formation in close-tolerance components such as servo-valves• High performance and smooth hydraulic operations derived from fast air release, very good foam control

and good water separability• Exceptional corrosion protection reduces the negative effects of moisture on system components• Excellent filterability to prevent filter blockage even in the presence of water• Effective oxidation and chemical stability characteristics allows extension of oil and filter life

Applications• Systems employing gear, vane, radial and axial piston pumps where anti-wear hydraulic oils are

recommended• Hydraulic applications where contamination or leakage are unavoidable• Where small amounts of water are unavoidable and this water could damage components• Systems containing gears and bearings where mild anti-wear characteristics are required• Systems requiring load-carrying capability and anti-wear protection• Applications where thin oil-film corrosion protection is an asset such as systems where small amounts of

water exist• Machines containing a wide range of components using various alloys in their designs

1 of 3

Specifications and Approvals

ExxonNutoH150

ExxonNutoH100

ExxonNutoH68

ExxonNutoH46

ExxonNutoH32

ExxonNutoH22

ExxonNutoH15

ExxonNutoH10

Meets or Exceedsthe followingindustryspecifications

XXXXDenison HF-0XXXVickers I-286-SXXXVickers M-2950-S

XXXXXXDIN 51524 PART 2XXXXXXXXISO 11158 TYPE HM

XCincinnati MachineP-68

XCincinnati MachineP-70

XCincinnati MachineP-69

ExxonNutoH150

ExxonNutoH100

ExxonNutoH68

ExxonNutoH46

ExxonNutoH32

ExxonNutoH22

ExxonNutoH15

ExxonNutoH10

Has the followingbuilder approvals

XXXDenison HF-0Cincinnati Machine

xP-68xP-69

xP-70

Typical Properties

ExxonNutoH150

ExxonNutoH100

ExxonNutoH68

ExxonNutoH46

ExxonNutoH32

EXXONNutoH22

ExxonNutoH15

ExxonNutoH10

Nuto H Series

150100684632221510ISO Viscosity GradeViscosity, ASTM D445, cSt @ 40ºC

150100684632221510cSt @ 40ºC14.611.18.56.75.404.423.452.71cSt @ 100ºC95951071041041059697Viscosity Index,

ASTM D 22701A1A1A1A1A1A1A1ACopper Strip

Corrosion, ASTM D130

PassPassPassPassPassPassPassPassRust Characteristics,ASTM D 665B

-12-12-18-24-24-24-24-36Pour Point, ºC, ASTMD 97

258242234226212206182170Flash Point, ºC,ASTM D 92

2 of 3

ExxonNutoH150

ExxonNutoH100

ExxonNutoH68

ExxonNutoH46

ExxonNutoH32

EXXONNutoH22

ExxonNutoH15

ExxonNutoH10

Nuto H Series

0.8870.8840.8820.8760.8720.8650.8570.850Density 15ºC, ASTMD 1298, kg/LDemulsibility time(minutes) to 3mlemulsion;

--201515151015@ 54ºC1010------@ 82ºC

Health and SafetyBased on available information, this product is not expected to produce adverse effects on health when usedfor the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) arefollowed. MSDS's are available upon request through your sales contract office, or via the Internet. This productshould not be used for purposes other than its intended use. If disposing of used product, take care to protectthe environment.

The Exxon (Esso) logotype, the Running Tiger are trademarks of Exxon Mobil Corporation, or one of itssubsidiaries.

ExxonMobil Lubricants & SpecialtiesAll products may not be available locally. For more information, contact your local sales office or visit www.exxonmobil.com.ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override orsupersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil affiliate entities. Due to continual productresearch and development, the information contained herein is subject to change without notification. Typical Properties may vary slightly.© 2001 Exxon Mobil Corporation. All rights reserved.

3 of 3