Nuera Transport - Trailer Body Component Catalog

2

Body ComponentsBody Components

Part # Width Radius

01-001 60” 12”

01-002 60” Camber 12”

01-003 60” 6”

01-004 60” Camber 6”

01-013 66” Camber 6”

01-020 72” 12”

01-021 72” Camber 12”

01-022 72” 6”

01-023 72” Camber 6”

01-025 74” 12”

01-025-1 74” Camber 12”

01-027 74” 6”

01-027-DAL 74” Camber 4”

01-030 78” 12”

01-031 78” Camber 12”

Part # Width Radius

01-032 78” 6”

01-033 78” Camber 6”

01-038 80” 6”

01-040 84” 12”

01-041 84” Camber 12”

01-042 84” 6”

01-043 84” Camber 6”

01-050 90” 12”

01-051 90” Camber 12”

01-052 90” 6”

01-053 90” Camber 6”

01-060 96” 12”

01-062 96” 6”

01-063 96” Camber 6”

01-100 72” 5”

01-101 84” 5”

16 Gauge Steel (other material and special sizes available upon request)

1” SQUARE ROOF BOWS

AERODYNAMIC NOSE BOWS

Part # Depth Width Radius Material

01-600 25" 72” 12” Steel

01-600-A 25" 72” 12” Alum.

01-601 27” 78” 12” Steel

01-601-A 27” 78” 12” Alum.

01-602 27” 80” 12” Steel

01-650 28” 72” 6” Steel

01-654 28” 74” 6” Steel

01-651 28” 78” 6” Steel

01-652 28” 80” 6” Steel

01-656 28” 84” 6” Steel

01-658 28” 100” 6” Steel

Steel or Aluminum AvailableSpecial Sizes Available

AERODYNAMIC NOSE CAPS

Part # Width Radius Material

02-100 72” 12” 19 Gauge

02-100-A 72” 12” Alum.

02-101-A 78” 12” Alum.

02-102 80” 12” 19 Gauge

02-150 72” 6” 19 Gauge

02-151 78” 6” 19 Gauge

02-152 80” 6” 19 GaugeSteel or Aluminum Available

Special Sizes Available

Body

Com

ponents

3-PIECE STEEL ROOF CAPS

Part # Width Radius Material Mfg. #

02-003 60” 12” 19 Gauge n/a

02-012 72” 12” 19 Gauge n/a

02-020 84” 12” 19 Gauge n/a

Special sizes available upon request14”

14”

Width

12” R

12” R



02-013 72” 6” 19 Gauge n/a

02-005 60” 6” 19 Gauge n/a

Special sizes available upon requestWidth

8”

8”

6” R6” R

6” R



02-023 36” 12” 19 Gauge n/a

02-001 60” 12” 19 Gauge n/a

02-010 72” 12” 19 Gauge n/a

Special sizes available upon request

Width

12” R

15”

37”

30” R

or

36” R



02-002 60” 6” 19 Gauge n/a

02-011 72” 6” 19 Gauge n/a


Width

6” R

36”

6”

30” R

BALL CORNERS

Part # Size Material Mfg. #

02-031 6” 19 Gauge n/a

02-032 8” 19 Gauge n/a

02-030 12” 19 Gauge n/a

02-840-A 6” .080 Aluminum n/a

02-841-A 8” .080 Aluminum n/a

02-842-A 12” .080 Aluminum n/a

02-842-A-1 12” .050 Aluminum n/a

02-843-A 5” x 12” .080 Aluminum n/a

02-845-A 6” x 12” .080 Aluminum n/a

02-845-A-1 6” x 12” .050 Aluminum n/a

02-033 5” x 12” 19 Gauge n/a

02-033-G 5” x 12” 19 Gauge - Galvaneal n/a

02-034 6” x 12” 19 Gauge n/a

02-846-A 3” .050 Aluminum n/a

02-860-DAL 5” x 12” .050 Aluminum n/a

02-861-DAL 5” x 12” .050 Aluminum n/a

02-036 5” 19 Gauge n/a

02-036-A 5” .080 Aluminum n/a


5, 6, 8, 12” Radius

12” Radius

3


Body

Com

ponents

4


A = Width

B = Length (across the bottom)

C = Height

D = Stretch Out

- Single (fig. 1 & 5)

- Tandem (fig. 2 & 3)

- Triple (fig. 4)

- Round (fig. 1, 2, 3 & 4)

- Jeep (fig. 5)

- Straight (fig. 3)

- Tear Drop (fig. 2 & 4)

- Single Radius (fig. 6 & 8)

- Double Radius (fig. 7)

- 2” Radius (fig. 8)

- 1” Radius (fig. 6)

1.2.

4. 5.

6.

3.

7.

AB

C

D

Fenders come in various shape, sizes and material. The following drawings are designed to help you determine which fender

features will best suit your needs. Nuera Transport offers a wide assortment of fenders on the following pages, as well as special

order custom fenders. Please ask your sales associate for information on custom needs.

8.

2”

- 16 Gauge = Cold Roll Steel

- 16 Gauge Galv = Galvaneal Steel

- .090 Alum = Smooth Aluminum

- Alum TP = Tread Plate Aluminum

- 12 Gauge TP = Tread Plate Steel

FENDER FEATURE GUIDE

FENDER MEASUREMENTS

FENDER MATERIAL

FENDER LIP RADIUS

FENDER STYLE & TYPE

FENDER FEATURE GUIDE

Body

Com

ponents

5


SINGLE AXLE ROUND FENDERS

Part # Width Length Height Material Tire

03-001 7” 21” 5.75” 16 Gauge 8” Tire

03-002 7.5” 23.5” 6.5” 16 Gauge 10-12” Tire

Double Radius : 1.5” radius on both sides


03-003 7” 28” 9.75” 16 Gauge 13” Tire

03-300 7” 22.5” 8.5” 16 Gauge 13”

03-309 9” 24” 12” 16 Gauge 14-15”

03-306 9” 30” 15” 16 Gauge 14-15”

03-004-P 9” 32” 16” 16 Gauge 14-15”

Double Radius : 1” radius on both sides


03-004 9” 32” 15” 16 Gauge 14-15” Tire

03-005 10.75” 36” 20.5” 16 Gauge 15-16” Tire

03-005-A 10.75” 36” 20.5” .090 Alum 15-16” Tire

03-005-A-18 10.75” 36” 18” .090 Alum 15-16” Tire

03-007 10.75” 32” 16.5” 16 Gauge 15-16” Tire

03-006 13” 36” 20.5” 16 Gauge 16” Tire

03-003-1-P 8” 28” 11” 16 Gauge 13-14” Tire

03-301 9” 30” 15” 16 Gauge 14-15” Tire

03-003-1 7.75" 28" 9.5" 16 Gauge 13” Tire

03-003-8 8” 28” 11” 16 Gauge 13-14” Tire

03-005-TP 10.75" 36" 20" Tread Plate 15-16” Tire

Single Radius : 1” radius on front, 90 degree on back

Body

Com

ponents

6


Part # Width Length Height Material

03-020 9” 66” 19” 16 Gauge

03-030 9” 72” 20.5” 16 Gauge

03-040 10.75” 72” 20.5” 16 Gauge

03-030-TP 9” 72” Strt Trdplt 14 Gauge


03-842-A 10.75” 72” 20.5” .090 Alum

03-037 10” 68” 18” TD 16 Gauge

TANDEM AXLE 2” RADIUS TEAR DROP FENDERS

TANDEM AXLE STRAIGHT FENDERS

JEEP FENDERS


03-010 8” 26” 10” 16 Gauge 13-14” Tire

03-010-1 8” 28” 14” 16 Gauge 13-14” Tire

03-010-2 8” 28” 10” 16 Gauge 13-14” Tire

03-011 10” 33” 16.5” 16 Gauge 14-15” Tire

03-011-A 10” 33” 16.5” .090 Alum. 14-15” Tire

03-011-1-A 10” 36” 19.25” .090 Alum 14-15” Tire

03-011-ATP 10” 33” 16.5” Alum TP 14-15” Tire

03-012 12” 29.5” 16.5” 16 Gauge 14-15” Tire

03-036 10” 72” 19” 16 Gauge Tandem Axle03-813-TP 10” 72” 19” 14 Gauge TP Tandem Axle03-809-ATP 10” 36” 17” Alum. TP 14-15” Tire

03-016-ATP 10” 66” 19” Alum. TP Tandem Axle03-017-ATP 10” 69” 19” .100 Alum. TP Tandem Axle03-72FBSB 10" 69" 19.5” Teardrop Tandem Axle03-811-A 10" 28” 10” .090 Alum. 13-14” Tire

03-811-ATP 10" 28” 10” Alum. TP 13-14” Tire

Body

Com

ponents

7


Body

Com

ponents

TANDEM AXLE TEAR DROP FENDERS


03-021 9” 66” 19” 16 Gauge Cold Roll

03-021-18 9” 66” 18” 16 Gauge Cold Roll

03-821-A 9” 66” 19” .090 Alum

03-031 9” 72” 20.5” 16 Gauge Cold Roll

03-031-TP 9” 72” 20” 14 Gauge Tread Plate Steel

03-032-A 9” 72” 21.5” .090 Alum

03-830-A 9” 72” 19” .090 Alum

03-831-A 10” 66” .090 Alum

03-041-C 10.75” 72” 20.5” 16 Gauge Cold Roll

03-041-G 10.75” 72” 20.5” 16 Gauge Galv

03-041-TP 10.75” 72” 20” 14 Gauge Tread Plate Steel

03-041-TPA 10.75” 72” 20.5” Alum. Tread Plate

03-840-A 10.75” 72” 19” .090 Alum

03-080 12” 72” 20.5” 16 Gauge Cold Roll

03-850-A 12” 72” 20.5” .090 Alum

03-060 13” 72” 20.5” 16 Gauge Cold Roll

03-860-A 13” 72” 20.5” .090 Alum

03-841-A 10.75” 68” 20.5” 1” R TD Alum

000-03-007 10.75” 68” 20.5” 16 Gauge Cold Roll

03-303 10.75” 72” 20.5” 14 Gauge Tread Plate Steel

03-302 9” 61” 16 Gauge Cold Roll

03-897 6.5” 72” .090 Alum

TRIPLE AXLE TEAR DROP FENDERS


03-050 10.75” 108” 20.5” 16 Gauge

03-052-A 10” 108” 20.5” .090 Alum

03-304 10.75” 108” 20.5” 14 Gauge

Available in steel or aluminum.

ALUMINUM FENDER FLARES


03-890 2.5” 70” .090 Alum

03-891 2.5” 72” .090 Alum

03-892 4.5” 72” .090 Alum

03-893 2.5” 108” (Triple) .090 Alum

03-894 4.5” 108” (Triple) .090 Alum

03-895 1” 72” .090 Alum

03-896 1” 108” 20” .090 Alum

8


FENDER BACKS

Part # Length Height Material

03-046 32” 9” 18 Gauge (precut for 32”)03-046-TP 32” 9” 14 Gauge Tread Plate (precut for 32”)03-044 63” 12” 18 Gauge (precut for 66” fender)03-045 69” 12” 18 Gauge (precut for 72” fender)03-045-TP 69” 12” 14 Gauge Tread Plate (precut for 72” fender)03-049 69” 12” 18 Gauge (square)03-045-1TP 69” 14” 14 Gauge Tread Plate (square)03-047 28” 7.75” 18 Gauge (precut for 28”)

Pre-cut fender backs are designed to fit easily into the corresponding fender. Simply lay the

back in and tack it at several locations. We also offer the square fender backs in order to allow the

flexibility to custom fit any odd shaped fender.

PLASTIC FENDERS

Part # Description

03-210 Injection Molded Fender, Black (7.5” x 33.5” x 8.75”) - 12” Tire

03-211 Injection Molded Fender, Black (9.7” x 43.4” x 12.75”) - 14” Tire

Note: White available on request.

Part # Description

03-213 Injection Molded Fender, Black (7” x 20.25” x 12.75”)03-220 Injection Molded Fender, Black (9.7” x 31.3” x 12.75”)03-217 Injection Molded Fender, White (7” x 20.25” x 6.25”)03-218 Injection Molded Fender, White (7.5” x 24” x 8.75”)03-214 Injection Molded Fender, Black (9” x 29.25” x 12”)03-212 Injection Molded Fender, White (9” x 40” x 12”)03-219 Injection Molded Fender, White (9.7” x 43.4” x 12.75”)03-215 Injection Molded Fender, White 10.25” x 45” x 14.85”)

Note: Stock fenders are colored as listed.Special order colors black, white, & silver are available on most sizes on request.

Body

Com

ponents

Part # Description

03-813-B Treadplate Back for 03-813-TP

9


BRUSH FENDERS

Part # Description Width Length Material

03-200 Brush Fender 10.75” 120” 10 Gauge

FLAT ESCAPE DOOR

Part # Description

04-019 Flat Escape Door 24” x 65” Framed (16 Gauge Steel)04-020 Flat Escape Door 20” x 39” Framed (16 Gauge Steel)

39”

20”

Our brush fenders are manufactured from heavy 10 gauge material. This

insures that they will stand up to the most damaging of abuse. Because we manu-

facture this item in our Arkansas facility, any special sizes or designs are available

upon request.

Escape doors include hinge and cut-out for standard flush lock. All doors are made from 16

gauge steel. Hole size - 2 3/4” x 3 3/4”

DIAMOND TREAD FENDER GUSSET

Part # Description

03-043 14 Gauge Diamond Tread Fender Gusset

This tough gusset is perfect for adding support to any fender. It measures 8” x 8” x 11” with

a 3/4” (90 degree) lip on the front. Because it is high definition plasma cut, it offers a clean edge

and product consistency.

Body

Com

ponents

30”

59”

Part # Description

04-021 Rolled Escape Door 30” x 59” Framed (16 Gauge Steel)- 5’ wide trailer - 30” Radius

ROLLED ESCAPE DOOR

Escape doors include hinge and cut-out for standard flush lock (2 3/4” x 3 3/4”).

30” Radius (5’ trailer)

36” Radius (6’ trailer)

10


SADDLE AND FEED DOORS

Part # Description

04-001 Rolled Feed Door 17” x 23” Framed (16 Gauge Steel)

All feed doors are non-stock items. They require additional lead time.

Part # Description

04-002 Flat Feed Door 18” x 24” Framed (16 Gauge Steel)

All feed doors are non-stock items. They require additional lead time.

24”

17”

23”

18”

30” R

Part # Description

04-010 Rolled Saddle Door 30” x 33” Framed (16 gauge Steel)

All saddle doors are non-stock items. They require additional lead time.

Part # Description

04-011 Flat Saddle Door 30” x 33” Framed (16 Gauge Steel)

All saddle doors are non-stock items. They require additional lead time.

30” R

30”

33”

33”

30”

Saddle and Feed doors include hinge and cut-out for standard flush lock. All doors are made

from 16 gauge steel. Hole size - 2 3/4” x 3 3/4”.

ROLLED NOSE ANGLES AND BOWS

Part # Description

05-001 Rolled Nose Angle - 60” Wide / 30” Radius

1.25” x 1.25” Angle (1/8” Steel) 05-002 Rolled Nose Angle - 72” Wide / 36” Radius

1.25” x 1.25” Angle (1/8” Steel) 05-003 Rolled Nose Bow 60” Wide / 30” Radius

1” Square Tube (16 Gauge Steel)05-004 Rolled Nose Bow 72” Wide / 36” Radius

1” Square Tube (16 Gauge Steel)

All rolled nose angles & bows are non-stock items. They require additional lead time.

The rolled nose bows are made from 1” square, 16 gauge tube. The rolled nose angle is

made from 1.25” x 1.25” angle (1/8” Steel). Because we manufacture this item in our Arkansas

facility, any special sizes or designs are available upon request.

Body

Com

ponents

11


WALL SLAT

Part # Description Width Height

06-001-R 18 Gauge Wall Slat 6” 20’

06-001-A Alum. Wall Slat 6” 20’6”

7/16”

Wall slat is available in either steel or aluminum.

48”

10”

5 1/8”

9 1/4”

1 1/4”

4 1/2” Dia.

Hole

Part # Description

06-011 Rear Brace - 10” Left Side Only

06-012 Rear Brace - 10” Right Side Only

The rear brace is manufactured from 14 gauge steel. The light hole is designed to accommo-

date any 4 1/2” light. See our lights and electrical section for our selection of lights.

GOOSENECK GUSSETS / BRACES

16 GAUGE STEEL BODY PANELS

Part # Description Width Height Material

06-050 Body Panel 96” 47.5” 16 Gauge

06-060 Body Panel 120” 47.5” 16 Gauge Width

Height

Our body panels are made from 16 gauge material and have 3 ribs for increased strength.

Because we manufacture this item in our Arkansas facility, any special sizes or designs are available

upon request.

Body

Com

ponents

12


GRAVEL GUARD

Part # Description

07-301 Gravel Guard - 9” Wide




Gravel guard is used on the frontal exposed surface of a trailer to minimize rock damage.

Sold either by the foot in 10 ft. increments or entire roll.

PIPE BOWS

1 5/8”

Part # Width Radius Height Material

01-500 72” 6” 78” 1 5/8” Pipe

Because we manufacture this item in our Arkansas facility, any special sizes or designs are

available upon request.

TRIM AND MOLDING

Part # Description Width Length

07-001 V-Chrome 1 1/8” 12’


07-006 Drip Rail 1” 12’

VINYL SAFETY TREAD

Part # Description

07-400-A 9” Black Vinyl Safety Tread



Vinyl safety tread has a pebbled, non-skid surface on one side and is self adhesive on the

other. Sold either by the foot in 10 ft. increments or entire roll (150 feet per roll).

Body

Com

ponents

13


TRIM AND MOLDING


07-002 Lipped Trim 1” 12’

07-003 Lipped Trim 1 1/4” 12’


07-004 Flat Trim 3/4” 12’


07-010 Alum. Molding w/Slot 1 1/4” 12’

Part # Description

07-010-1 Decorative Chrome Cap End

Part # Description

07-011 Black Vinyl Insert

07-011-Red Red Vinyl Insert

07-011-White White Vinyl Insert

VINYL INSERT

Vinyl insert is used with the slotted aluminum trim (part # 07-010) above.

Body

Com

ponents

Documents

Nuera Transport - Trailer Body Component Catalog