NT’s Premier Boat Builder

Shed 2/29 Tannadice St, Winnellie NT 0820 AustraliaPO Box 38655, Winnellie NT 0820 Australia

Ph: (08) 8984 3898Fax: (08) 8984 3182Mob: 0418 854 524

email: admin@customworksnt.com.auweb: www.customworksnt.com.au

Cutting edge aluminium boat manufacturer

Since Custom Works established in 2007, the company has rapidly developed a reputation for innovative designs and high quality workmanship, servicing a variety of industries including marine, manufacturing, construction and transportation.

A major component within the company is Custom Works Marine. Principal designer, Dale Smith, has been servicing the marine industry most of his working life both locally and internationally. Using Maxsurf 3D modeling software Dale is able to accurately design to speci�c customer requirements. His work consistently proving to be creative, unique and of the utmost quality, representing the cutting edge of alloy boat manufacture.

Employed at Custom Works is a dedicated team who deliver Northern Territory’s premier aluminium boats. Their attention to detail and knowledge of the marine industry assist in perfecting each and every vessel - from construction to �t out. Not only are the employee’s invaluable, but the equipment used and materials sourced are of the highest quality, ensuring the most professional outcome.

Leading the local industry in custom built marine manufacture, talk to Dale about the various options available for your vessel.

1.

Using state of the art software each boat design is developed using 3D modeling capabilities. These processes ensure each characteristic of the boat will perform as per the design requirement.

Grade 5083 DNV certi�ed aluminium plate makes up the shell component of the boats. This is a quality product and standard that is continued throughout all construction stages. The devoted employees at Custom Works show passion, producing a high quality �nished product. To us there is no compromise when it comes to the safety of punters on board our vessels.

High Quality �t out parts and equipment �nalise the construction stage. The end product, a luxurious custom built boat made for you to indulge in.

OUR BUILD PROCESSES - Uncompromised design

2.

“... if you’re looking for a new vessel from the Territory’s cutting-edge alloy boat builder, and want a level of service second-to-none, give Dale and his professional team at Custom Works a call – you won’t be disappointed...” John Dagen Owner/Operator Darwin Barra Fishing Tours

“Unlike some other ‘custom’ builders who won’t alter their boat designs, Dale listens to his customers needs while keeping in consideration the quality and performance of the �nal product. Further to customer input on the design, it is asked that they be involved for the build so it is tailored to the customer and their needs. He is a true custom boat builder.” Bruce Hansen, Customer.

TESTIMONIALS

3.

PREM

IER

SERI

ES PREMIER SERIES - Economical

OPTIONAL CUSTOMISATIONSTANDARD FEATURES

5.3M PREMIER 5.5M PREMIER 5.8M PREMIER

The Premier Series represents a more a�ordable option for the committed recreational angler. Models in the Premier range currently include 4.9m, 5.3m, 5.5m and 6.0m.

All Premier series have level �oatation and sealed self-draining decks. It is the only recreational series that have these speci�cations, leaving a safe, assured quality ride.

Fully welded sealed decksbilge plumbinghatch on anchor welldeck wash plumbingfwd cast deck sealed hatch4 seat spigotsself draining kill/bait tank3 x bollards, rear centre console – 600mm wide3 seat pedestalstwin battery provisionwiring harness and switch panel2 x 4 tray tackle lockersside pocketsrear storage lockersbow rollerpositive buoyancy (models below 6m)hydraulic steeringnavigation and anchor lightsbow railsgas strut on main casting deck hatchthree year warranty

Electric motor mountclient steps up to casting deckcombination rear cast deck/seatdeck washbait boardrecessed alcoves for emergency equipmentdrink holders in gunwaleesky helm seatfold down windscreenthru-deck storage lockersrocket launcherback-lit compassfull height casting deckhorizontal and vertical rod holdersdual width console

Speci�cationsLength – 5.3mMax horsepower – 150hpBeam – 2.15Single engine con�gurationHull thickness – 4mm 5083 PLSide thickness – 4mm 5083 PLFrames – 3mm/4mm 5083 PLDeck – 3mm self draining20” transom heightMax fuel capacity – 190LInternal free board – 600mmDead rise – 12 deg

Speci�cationsLength – 5.5mMax horsepower – 175hpBeam – 2.4Single engine con�gurationHull thickness – 4mm 5083 PLSide thickness – 4mm 5083 PLFrames – 3mm 5083 PlDeck – 3mm self draining25” transom heightMax fuel capacity – 250LInternal free board – 600mmDead rise – 15 deg

Speci�cationsLength – 5.8mMax horsepower – 200hpBeam – 2.25Single engine con�gurationHull thickness – 4mm 5083 PLSide thickness – 4mm 5083 PLFrames – 3mm/4mm 5083 PLDeck – 3mm self draining25” transom heightMax fuel capacity – 300LInternal free board – 600mmDead rise – 15 deg

This range is currently being developed.

4.

PREMIER SERIES

NT TOUGH!

5.

TAIP

AN S

ERIE

SThis V nose punt is speci�cally designed for the shallow draft �shing environment. The wide 7 deg transom o�ers excellent stability, however the forefoot design and reverse chines give this Punt an uncanny soft and dry ride. With plenty of �oor space this is the ideal ride for any occasion. Custom Works can build a layout to suit you.

The applications are truly endless.

TAIPAN SERIES - Performance Plus

Fully welded sealed decksbilge plumbinghatch on anchor welldeck wash plumbingfwd casting deck sealed hatch4 seat spigotsforward and aft bow rails4 gunwale mounted rod holdersself draining kill/bait tank3 x bollardsrear centre console – 600mm wide3 seat pedestalstwin battery provisionwiring harness and switch panel2 x 4 tray tackle lockersside pocketsrear storage lockerssolid bow rollerpositive buoyancy (models below 6m)hydraulic steeringnavigation and anchor lightsbow railsgas strut on main casting deck hatchthree year warranty

Electric motor mountclient step ups to casting deckcombination rear cast deck/seatdeck washbait boardrecessed alcoves for emergency equipmentdrink holders in gunwaleesky helm seatfold down windscreenthru-deck storage lockershorizontal and vertical rod lockersback lit compassfull height casting deckdual width console

OPTIONAL CUSTOMISATIONSTANDARD FEATURES

Speci�cationsLength – 5.3mMax horsepower – 140hpBeam – 2.45Single engine con�gurationHull thickness – 4mm 5083 PLSide thickness – 3mm 5083 PLFrames – 3mm/4mm 5083 PLDeck – 3mm self draining20” transom heightMax fuel capacity – 125LInternal free board – 550mmDead rise – 7 deg

Speci�cationsLength – 7.2mMax horsepower – 175hpBeam – 2.45Single engine con�gurationHull thickness – 4mm 5083 PLSide thickness – 4mm 5083 PLFrames – 3mm/4mm 5083 PLDeck – 4mm self draining25” transom heightMax fuel capacity – 400LInternal free board – 750mmDead rise – 7 deg

Speci�cationsLength – 5.95mMax horsepower – 175hpBeam – 2.45Single engine con�gurationHull thickness – 4mm 5083 PLSide thickness – 4mm 5083 PLFrames – 3mm/4mm 5083 PLDeck – 4mm self draining25” transom heightMax fuel capacity – 200LInternal free board – 600mmDead rise – 7 deg

5.3M TAIPAN 5.95M TAIPAN 7.2M TAIPAN

6.

TAIPAN SERIESLOW WASH!

7.

ELIM

INAT

OR S

ERIE

S ELIMINATOR SERIES - Comfortable ride

OPTIONAL CUSTOMISATIONSTANDARD FEATURES

5.8M ELIMINATOR 6.4M ELIMINATOR 6.8M ELIMINATOR

The Eliminator series represents Custom Works �agship model. They come standard with a 5mm/6mm hull, 4mm sides and a 4mm self-draining deck.

They are built to a non-survey standard, providing an uncompromised design for the recreational angler. As a result, this vessel can be completely tailored to an individual’s needs having a fully customised layout meeting requirements and �tted with an Australian Builders plate.

Exceptional build quality, functionality and performance, the Eliminator series ease through tough Territory conditions. A spacious user-friendly layout leaves you enjoying a relaxed and comfortable ride.

Fully welded sealed decksbilge plumbinghatch on anchor welldeck wash plumbingfwd cast deck2 x sealed hatch8 seat spigotsforward and aft bow rails8 gunwale mounted rod holdersself draining kill/bait tank3 x bollardsrear centre console – 600mmwide 4 seat pedestalstwin battery provisionanti-backwash scuppers2 x 6 tray tackle lockersboarding ladderrear storage lockerstransducer bracketsgas strut on main casting deck hatchhydraulic steeringhorizontal and vertical rod holderswiring harness and switch panelnavigation and anchor lightsside pocketssolid bow roller�ve year structural warranty

Rod lockerlive bait tankelectric anchor winchtarga barbait board/rigging stationtarga mounted canopydrink holders in gunwaleclient steps up to casting deckdeck washfold down windscreenelectric motor mountrocket launchercombination rear cast deck/seatthru-deck storage lockersfull height casting deckback-lit compassdual width consolerecessed alcoves for emergency equipment

SPECIFICATIONSLength – 5.8mMax horsepower – 200hpBeam – 2.475Single engine con�gurationHull thickness – 5mm 5083 PLSide thickness – 4mm 5083 plFrames – 4mm/5mm 5083 PLDeck – 4mm self draining25” transom heightMax fuel capacity – 300LInternal free board – 650mmDead rise – 15 deg

SPECIFICATIONSLength – 6.4mMax horsepower – 200hpBeam – 2.475Single engine con�gurationHull thickness – 5mm 5083 PLSide thickness – 4mm 5083 plFrames – 4mm/5mm 5083 PLDeck – 4mm self draining25” transom heightMax fuel capacity – 300LInternal free board – 650mmDead rise – 15 deg

SPECIFICATIONSLength – 6.8mMax horsepower – 225hpBeam – 2.2Single engine con�gurationHull thickness – 5mm 5083 PLSide thickness – 4mm 5083 PLFrames – 4mm/5mm 5083 PLDeck – 4mm self draining25” transom heightMax fuel capacity – 400LInternal free board – 650mmDead rise – 15 deg

USER FRIENDLY LAYOUT!8.

ELIMINATOR SERIES

9.

ELIM

INAT

OR G

P SE

RIES ELIMINATOR GP SERIES - Serious Fishing

OPTIONAL CUSTOMISATIONSTANDARD FEATURES

6.4M ELIMINATOR GP 7.5M ELIMINATOR RA6.8M ELIMINATOR GP

The Eliminator Guide Pro series o�er a hull built to a 2D survey standard conforming to Uniform Ship-ping Laws (USL code) and the NT Government Marine Safety Branch requirements. Surveyed vessels have purpose built provisions to accommodate speci�ed safety gear on board.

This safe and practical design is the ultimate guide boat which carries buoyancy for level �oatation to survey standard. Complete with full length hand rails, sealed deck, large fuel capacity and a huge amount of �shing room, this makes the best choice for a professional boating capacity.

Fully welded sealed decksbilge plumbinghatch on anchor welldeck wash plumbingfwd cast deck2 x sealed hatch8 seat spigotsforward and aft bow rails8 gunwale mounted rod holdersself draining kill/bait tank3 x bollardsrear centre console – 600mmwide 4 seat pedestalstwin battery provisionanti-backwash scuppers2 x 6 tray tackle lockersboarding ladderrear storage lockerstransducer bracketsgas strut on main casting deck hatchhydraulic steeringhorizontal and vertical rod holderswiring harness and switch panelnavigation and anchor lightsside pocketssolid bow roller�ve year structural warranty

Rod lockerlive bait tankelectric anchor winchtarga barbait board/rigging stationtarga mounted canopydrink holders in gunwaleclient steps up to casting deckdeck washfold down windscreenelectric motor mountrocket launchercombination rear cast deck/seatthru-deck storage lockersfull height casting deckback-lit compassdual width consolerecessed alcoves for emergency equipment

QUALITY, SAFE & PRACTICAL!

SPECIFICATIONSLength – 6.4mMax horsepower – 225hpBeam – 2.475Single engine con�gurationHull thickness 5mm 5083 PLSide thickness – 4mm 5083 PLFrames – 4mm/5mm 5083 PLDeck – 4mm self draining25” transom heightMax fuel capacity – 300LInternal free board – 650mmDead rise – 15 deg

SPECIFICATIONSLenth – 6.8mHax horsepower – 250hpBeam – 2.50Single engine con�gurationHull thickness – 5mm 5083 PLSide thickness – 4mm 5083 PLFrames – 4mm/5mm 5083 PLDeck – 4mm self draining25” transom heightMax fuel capacity – 400LInternal free board – 650mmDead rise – 15 deg

SPECIFICATIONSLength – 7.5mMax horsepower – 300hpBeam – 2.80Twin engine con�gurationHull thickness – 6mm 5083 PLSide thickness – 4mm 5083 PLFrames – 6mm/4mm 5083 PLDeck – 4mm self draining25” transom heightMax fuel capacity – 500LInternal free board – 650mmDead rise – 15 deg

10.

ELIMINATOR GP SERIES

11.

12.

13.

Shed 2/29 Tannadice St Winnellie NT 0820www.customworksnt.com.au