Now in ScopusContent increased by 15%

REVIEWS OF ADHESION AND ADHESIVESE-ISSN 2168-09732016; Volume 4 (4 issues): $533 / €478 for institutions

SCOPEThe decision to publish Reviews of Adhesion and Adhe-sives (RAA) was taken because the scientific advances are rapid and multidisciplinary while information is scattered. So RAA specifically provides in-depth, incisive, illumi-nating and thought-provoking reviews written by subject matter experts covering all aspects of adhesion science and adhesive technology. Each review is revised 2 or 3 times and is imbued with the author’s experience so that

the reader will be able to assimilate the research in the area discussed easily and will be able to apply it in practice.

Abstracted or indexed in Scopus, Chemical Abstracts, Polymer Library, Google Scholar.

READERSHIPRAA will be read by researchers in many departments including chemistry, materi-als science, mechanical engineering, chemical and bimolecular engineering, phar-maceutical sciences, wood science and technology, bioproducts and biosystems.

ABOUT THE EDITORKashmiri Lal Mittal is one of the most senior scientists in adhesion and his involvement guarantees high quality scholarship. He was associated with the IBM Corporation from 1972 through 1993. Currently, he is teaching and consulting worldwide in the broad areas of adhesion as well as surface cleaning. He has initi-ated, organized and chaired a large number of international symposia, and is the editor of more than 110 books dealing with all aspects of adhesion.

SOME RECENTLY PUBLISHED ARTICLESDetermination of Wettability of Wood and Its Significance in Wood Science and Technology: A Critical ReviewPetrič, Marko; Oven, Primož

Aspects of Interfacial Structure of Silane Coupling Agents in Particulate-Filled Polymer Composites and the Reinforcement Effect: A Critical Review

Nakamura, Yoshinobu; Yamazaki, Ryota; Shitajima, Kohei; Karyu, Nozomi; Fujii, Syuji

Role of Bacterial Adhesion in Their Subsurface Deposition and Transport: A Critical ReviewYang, Guang; Wang, Boya; Vu, Kien; Tawfiq, Kamal; Chen, Gang

Ultra-Thin Plasma Polymer Films as a Novel Class of Adhesion Promoters: A Critical ReviewFriedrich J., Hidde, G.

Tailoring the Adhesion of Polymers using Plasma for Biomedical Applications: A Critical ReviewThakur Shaila, Neogi Sudarsan

Improvement of Interfacial Adhesion in Natural Plant Fiber-reinforced Un-saturated Polyester Composites: A Critical ReviewLi Kaichang, Qiu Renhui, Liu Wendi

Bonding Dissimilar Materials in Dentistry: A Critical ReviewZakir Muhammad, Tsoi James Kit-Hon, Chu Chun Hung, Lung Christie Ying Kei, Matinlinna Jukka Pekka

Flame Treatment of Polymeric Materials—Relevance to Adhesion: A Critical ReviewMazzola L, Cusma A.

Mucoadhesive Polymers for Enhancing Retention in Ocular Drug Delivery: A Critical ReviewKhare Anubha, Grover Kanchan, Pawar Pravin, Singh Inderbir

ABOUT SCRIVENER PUBLISHINGWe are a science and engineering publisher based near Boston and began operations in 2009. We publish in many fields but the main ones are: energy (all types); materials science, polymer science and plastics engineering, sur-face engineering, chemical and environmental engineering; nanotechnology.

Our books are co-published with John Wiley & Sons and we have pub-lished more than 160 books to date.

The 4 journals that we are publishing are exclusively published by Scriv-ener. Print and multi-site subscriptions are available.

Please go to www.scrivenerpublishing.com for more information.

View the abstracts at http://www.scrivenerjournals.com

To discuss subscriptions please phone Martin Scrivener on 781-864-5705 or message martin@scrivenerpublishing.com

Make sure you add these important and topical

engineering journals toyour collections

Scrivener Publishing (www.scrivenerpublishing.com) is launching the all-new Journal of Natural Gas Engineering in February 2016 to join our 3 current journals, which were launched in 2013. The Journal of Sustainable Energy Engineering, Jour nal of Renewable Materials, and Reviews of Ad hesion and Adhesives, as well as our new journal, are all peer-reviewed and publish on schedule. The editors are respected and senior, the editorial boards are first-rate and interna-tional, and the content is high quality. The online editions are hosted by Ingentaconnect.

Subscribe today for the 2016 volumes and get the first 3 volumes with a 20% discount.

Journal of NATURAL GASENGINEERING

VOLUME 1 ISSUE 1 2016

ISSN: XXX XX XXXX

First Issue in Feb. 2016JOURNAL OF NATURAL GAS ENGINEERINGE-ISSN 2379-28922016 (2 issues): $267 / €242 for institutions

SCOPE: The Journal of Natural Gas Engineering (JNGE) is a peer-reviewed journal publishing original research on the engineering, scientific, and technological advances covering all aspects of natural gas engineering: production, transportation, and processing. In addition, JNGE will include auxiliary sub-

jects such as thermodynamics, physical properties, phase equilibrium, etc. related to the natural gas industry. The intention is to include modeling and theoretical studies, experimental work, and field data. Thematic issues on topics related to natural gas engineering will also be developed, and papers are invited on any individual topic in natural gas engineering.

READERSHIP: Our audience includes chemical engineers, chemists, researchers, process engineers, petroleum engineers, students, and other professionals work-ing in natural gas. Covering all aspects of natural gas, the journal will also be of interests to professionals working in both upstream and downstream areas, but also LNG, pipelines, and other related topics.

ABOUT THE EDITORJohn J. Carroll, PhD, PEng is a Director for Gas Liquids Engineering, Ltd. in Calgary, Canada, joining after after three years with Honeywell. Previous to that Dr. Carroll was a Research Associate and Lecturer at the University of Alberta in Edmonton, Canada. Dr. Carroll holds bachelor and doctoral degrees in chemical engineering from the Uni-versity of Alberta, Edmonton, Canada, and is a registered professional engineer in the provinces of Alberta and New Brunswick in Canada. He is a member of the American Institute of Chemical Engineers (AIChE), the Society of Petroleum Engineers (SPE), and the International Union of Pure and Applied Chemistry (IUPAC) and is the author of numerous books and other publications and technical presentations.

JOURNAL OF SUSTAINABLE ENERGY ENGINEERINGE-ISSN 2164-62952016: Volume 4 (4 issues): $533 / €483 for institutions

SCOPE: The Journal of Sustainable Energy Engineering’s (JSEE) mission is to publish peer-reviewed, original research seeking sustainable methods of worldwide energy produc-

tion, distribution, and utilization through engineering, scientific, and technological advances in the areas of both fossil fuels and renewable energy. Energy issues cannot be addressed in isolation, without attention to the economy and the environment.

Thus, JSEE introduces the “E cubed” concept, addressing sustainability with a three-pronged emphasis on energy, economy and environment, publishing research in all of these areas, and their intersections, as they apply to global energy sustainability. This unique multi-disciplinary theme of JSEE allows the introduction of new and cutting-edge processes and technologies across all areas of energy production, transportation, and transmission, including fossil fuels and renewable energy and their intersection with the economy and environment. Papers are invited on any individual topic or those which are interdisciplinary.

Abstracted or indexed (in bold) in Chemical Abstracts, Pascal, Google Scholar.

READERSHIP: Professors and students in chemical engineering, mechanical engineering, petroleum engineering, civil engineering, sustainability engineering, energy, geology, and other departments will benefit greatly in their own research by having the important information on new processes, equipment, and other technolo-gies covered in JSEE available to them.

ABOUT THE EDITORDr. Fred Aminzadeh is professor of Petroleum Engineering at the University of Southern California. He also is the managing director of USC Global Energy Network and the Executive Director of USC Center for Geothermal Studies. He has served as the president of Society of Exploration Geophysicists. He has consulted to many DOE National Laboratories including LBNL, LANL, ORNL and NETL and has published ten books and holds three US patents. SOME RECENTLY PUBLISHED ARTICLES

New Accurate Model to Estimate Maximum Power of Photovoltaic Modules • and Arrays: M. Bencherif and T. Benouaz

Cost Effectiveness of Energy Storage to Manage Wind Variability’s Impact • on the Electrical Grid: George V. Chillingar, Martin Lackour, Farshad J. Hor-mozi and Robert M. HodelPerformance and Design Analyses of Free Convection, Single Channel • PV/T System. A. KomilovEffect of Antioxidants on the Oxidative Stability of Biodiesel Produced • from Karanja Oil: N. Kapilan, Chandra Sekar Birdar

Now in ScopusExpanded to 5 issues in 2016JOURNAL OF RENEWABLE MATERIALSE-ISSN 2164-63412016: volume 4 (5 issues): $635 / €574 for institutions

SCOPE:The Journal of Renewable Materials (JRM) publishes

high quality peer reviewed original research and review articles on macromolecules and additives obtained from renewable/biobased resources. Utilizing a multidisci-plinary approach, JRM introduces cutting-edge research on biobased monomers, polymers, additives (both organic and inorganic), their blends and composites. JRM showcases both fundamental aspects of organic chemistry, chemical modification pro-cessing, recycling, degradation, as well as new applications for renewable materials.

Abstracted or indexed in Scopus, Chemical Abstracts, Polymer Library, AGRI-COLA, Google Scholar.

READERSHIP: Chemists, polymer and materials scientists, chemical, bio-based and biomedical engineers, agricultural and environmental faculty and all those who work in the “bioeconomy” area.

ABOUT THE EDITORS Alessandro Gandini is a physical chemist who has taught and conducted research for the last fifty years at academic and other institutions in Switzerland, UK, Canada, USA, Cuba, France, Brazil and Portugal, after his first degree in Italy. He has published more than 400 scientific contributions and is an Honorary Doctor of the Saint Petersburg Forestry Academy and of Havana University, and was invested with the Ermine decoration of Grenoble National Polytechnic Institute.Ramaswamy Nagarajan has bachelor degrees in chemistry and rubber technology from India and a PhD doctoral degree in polymer science from the University Massa-chusetts. His research interest is in the development of “greener”/sustainable routes to advanced functional materials (polymers, additives and surfactants). He has published more than 50 papers in peer-reviewed journals and holds 14 U. S. patents.

SOME RECENTLY PUBLISHED ARTICLESReducing the Environmental Impact of Construction by Using Renewable Materials: Lawrence, Mike Mechanical Characterization of Gelatin-Flax Natural-Fiber Composites for Construction: Hess, K.M.; Srubar III, W.V. Sustainability Assessment of Protein-Soil Composite Materials for Limited Resource Environments: Roedel, Henning; Plata, Isamar Rosa; Lepech, Michael; Loftus, David Micromechanical Viscoelastic Analysis of Flax Fiber Reinforced Bio-Based Polyurethane Composites: Hosseini, Nassibeh; Javid, Samad; Amiri, Ali; Ulven, Chad; Webster, Dean C.; Karami, Ghodrat Application of Fiber Undulation Model to Predict Oriented Strand Composite Elastic Properties:Yadama, Vikram; Wolcott, Michael P. Design and Evaluation of Thin-Walled Hollow-Core Wood-Strand Sandwich Panels: Voth, Christopher; White, Nathan; Yadama, Vikram; Cofer, William Can We Build with Plants? Cabin Construction Using Green Composites: Hoiby, John C.; Netravali, Anil N.

Journal of NATURAL GASENGINEERING

VOLUME 1 ISSUE 1 2016 ISSN: XXX XX XXXX